[coreboot-gerrit] Change in coreboot[master]: mainboard/google/hatch/puff: Toggle on TetonGlacierMode

[Edward O'Callaghan (Code Review)]

Edward O'Callaghan has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/39041 )

Change subject: mainboard/google/hatch/puff: Toggle on TetonGlacierMode
......................................................................

mainboard/google/hatch/puff: Toggle on TetonGlacierMode

Leverage in Puff to avoid diskswap variants. Later this could become
part of the baseboard definition and hatch diskswap variants migrated
over to use it as well.

BUG=b:149171631
BRANCH=none
TEST=Swap between x4 NVMe drives and 2x2 Teton Glacier hybrid drives and
run lsblk, lspci, and nvme tools to confirm dynamic PCIe configuration
on Puff.

Change-Id: Ie87f0823f28457db397d495d9f1629d85cfd5215
Signed-off-by: Edward O'Callaghan 
---
M src/mainboard/google/hatch/variants/puff/overridetree.cb
1 file changed, 7 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/41/39041/1

diff --git a/src/mainboard/google/hatch/variants/puff/overridetree.cb b/src/mainboard/google/hatch/variants/puff/overridetree.cb
index 4ffbfed..cca2d41 100644
--- a/src/mainboard/google/hatch/variants/puff/overridetree.cb
+++ b/src/mainboard/google/hatch/variants/puff/overridetree.cb
@@ -2,6 +2,9 @@
    # Enable heci communication
    register "HeciEnabled" = "1"

+	# Auto-switch between X4 NVMe and X2 NVMe.
+	register "TetonGlacierMode" = "1"
+
    register "SerialIoDevMode" = "{
    	[PchSerialIoIndexI2C0]  = PchSerialIoDisabled,
    	[PchSerialIoIndexI2C1]  = PchSerialIoDisabled,
@@ -166,6 +169,9 @@
    # PCIe port 7 for LAN
    register "PcieRpEnable[6]" = "1"
    register "PcieRpLtrEnable[6]" = "1"
+	# PCIe port 11 (x2) for NVMe hybrid storage devices
+	register "PcieRpEnable[10]" = "1"
+	register "PcieRpLtrEnable[10]" = "1"
    # Uses CLK SRC 0
    register "PcieClkSrcUsage[0]" = "6"
    register "PcieClkSrcClkReq[0]" = "0"
@@ -281,6 +287,7 @@
    		end
    	end # FSP requires func0 be enabled.
    	device pci 1c.6 on  end # RTL8111H Ethernet NIC (becomes RP1).
+		device pci 1d.2 on end # PCI Express Port 11 (X2 NVMe)
    	device pci 1e.3 off end # GSPI #1
    end