Mimoja has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/34475 )
Change subject: Add Razer Blade Stealth (2016) H2U ......................................................................
Patch Set 33:
(5 comments)
https://review.coreboot.org/c/coreboot/+/34475/6//COMMIT_MSG Commit Message:
https://review.coreboot.org/c/coreboot/+/34475/6//COMMIT_MSG@16 PS6, Line 16: - BUG: Dmesg: ioapic 2 has no mapping iommu, interrupt remapping will be disabled
Thanks. […]
Not a board specific problem.
https://review.coreboot.org/c/coreboot/+/34475/7//COMMIT_MSG Commit Message:
https://review.coreboot.org/c/coreboot/+/34475/7//COMMIT_MSG@41 PS7, Line 41: - Headphones
Yes - most likely. Did not have the time to look into it so far.
Done
https://review.coreboot.org/c/coreboot/+/34475/9//COMMIT_MSG Commit Message:
https://review.coreboot.org/c/coreboot/+/34475/9//COMMIT_MSG@46 PS9, Line 46: -
Didn't look into it so far. […]
No it is not (only). I would need to debug the USB-PD handshake and partially reverse the EC firmware to understand the magic values the ACPI is 'writing' to it. When connected at boot, devices show up on PCIe, I would consider that usable. Waking the chip up does not work.
https://review.coreboot.org/c/coreboot/+/34475/16//COMMIT_MSG Commit Message:
https://review.coreboot.org/c/coreboot/+/34475/16//COMMIT_MSG@46 PS16, Line 46: - Onboard Keyboard in SeaBIOS
Do you have a debug log? Does the GRUB payload work correctly?
Done
https://review.coreboot.org/c/coreboot/+/34475/28/src/mainboard/razer/blade_... File src/mainboard/razer/blade_stealth_kbl/gma-mainboard.ads:
https://review.coreboot.org/c/coreboot/+/34475/28/src/mainboard/razer/blade_... PS28, Line 25: DP1, : DP2,
Try adding 'HDMI2, HDMI3,' to see if it helps with your HDMI issues
The HDMI is connected to the DP-1 Port via a conversion Chip.. It works, when plugged at boot.