Edward O'Callaghan (eocallaghan@alterapraxis.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/5882
-gerrit
commit e1bb8fed5753433718b6864a4c7d472d2f5fc695 Author: Edward O'Callaghan eocallaghan@alterapraxis.com Date: Fri May 30 11:35:33 2014 +1000
mainboard/jetway/nf81-t56n-lf: Port recent Persimmon changes
NOTFORMERGE ((yet)) !!!
Back port recent reference board AMD Persimmon changes in commits:
0eb2d6e CIMx: Set up the PCI IRQ routing fc03ad5 Persimmon: Make MPTable setup use IOAPIC defines 974d5c2 CIMx: Use the new PCI IRQ functions
Change-Id: I307709bfee554bc64788a973da6d9313ca7c0de2 Signed-off-by: Edward O'Callaghan eocallaghan@alterapraxis.com --- src/mainboard/jetway/nf81-t56n-lf/mainboard.c | 95 ++++++++++++++++- src/mainboard/jetway/nf81-t56n-lf/mptable.c | 145 +++++++++++++------------- 2 files changed, 162 insertions(+), 78 deletions(-)
diff --git a/src/mainboard/jetway/nf81-t56n-lf/mainboard.c b/src/mainboard/jetway/nf81-t56n-lf/mainboard.c index b3c9e3d..e06dbff 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/mainboard.c +++ b/src/mainboard/jetway/nf81-t56n-lf/mainboard.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2011 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -29,11 +30,96 @@ #include <device/pci_def.h>
#include <southbridge/amd/cimx/sb800/SBPLATFORM.h> -#include <southbridge/amd/sb800/sb800.h> +#include <southbridge/amd/cimx/sb800/pci_devs.h> +#include <southbridge/amd/cimx/cimx_util.h> +#include <northbridge/amd/agesa/family14/pci_devs.h>
void set_pcie_reset(void); void set_pcie_dereset(void);
+/*********************************************************** + * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01. + * This table is responsible for physically routing the PIC and + * IOAPIC IRQs to the different PCI devices on the system. It + * is read and written via registers 0xC00/0xC01 as an + * Index/Data pair. These values are chipset and mainboard + * dependent and should be updated accordingly. + * + * These values are used by the PCI configuration space, + * MP Tables. TODO: Make ACPI use these values too. + * + * The Persimmon PCI INTA/B/C/D pins are connected to + * FCH pins INTE/F/G/H on the schematic so these need + * to be routed as well. + */ +static u8 mainboard_picr_data[FCH_INT_TABLE_SIZE] = { + [0x00] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,0x0B, /* INTA# - INTH# */ + [0x08] = 0x00,0xF0,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ + [0x10] = 0x1F,0x1F,0x1F,0x0A,0x1F,0x1F,0x1F, /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerMon */ + [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, /* IMC INT0 - 5 */ + [0x30] = 0x0A,0x0B,0x0A,0x0B,0x1F,0x1F,0x0A, /* USB Devs 18/19/20/22 INTA-C */ + [0x40] = 0x0B,0x0B, /* IDE, SATA */ + [0x50] = 0x0A,0x0B,0x0A,0x0B /* GPPInt0 - 3 */ +}; + +static u8 mainboard_intr_data[FCH_INT_TABLE_SIZE] = { + [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */ + [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ + [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F, /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerMon */ + [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, /* IMC INT0 - 5 */ + [0x30] = 0x12,0x11,0x12,0x11,0x12,0x11,0x12, /* USB Devs 18/19/22/20 INTA-C */ + [0x40] = 0x11,0x13, /* IDE, SATA */ + [0x50] = 0x10,0x11,0x12,0x13 /* GPPInt0 - 3 */ +}; + +/* + * This table defines the index into the picr/intr_data + * tables for each device. Any enabled device and slot + * that uses hardware interrupts should have an entry + * in this table to define its index into the FCH + * PCI_INTR register 0xC00/0xC01. This index will define + * the interrupt that it should use. Putting PIRQ_A into + * the PIN A index for a device will tell that device to + * use PIC IRQ 11 if it uses PIN A for its hardware INT. + */ +/* + * Persimmon has PCI/PCIe slot INT_PINA/B/C/D connected to + * PIRQE/F/G/H so PIN A on off-chip devices should get + * mapped to PIRQE, etc. + */ +static const struct pirq_struct mainboard_pirq_data[] = { + /* {PCI dev, fn PCI INT {PIN A, PIN B, PIN C, PIN D}}, */ + {GFX_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_NC, PIRQ_NC}}, /* VGA: 01.0 */ + {NB_PCIE_PORT1_DEVFN, {PIRQ_E, PIRQ_F, PIRQ_G, PIRQ_H}}, /* NIC: 04.0 */ + {NB_PCIE_PORT3_DEVFN, {PIRQ_E, PIRQ_F, PIRQ_G, PIRQ_H}}, /* PCIe bdg:06.0 */ + {SATA_DEVFN, {PIRQ_SATA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SATA: 11.0 */ + {OHCI1_DEVFN, {PIRQ_OHCI1, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI1: 18.0 */ + {EHCI1_DEVFN, {PIRQ_NC, PIRQ_EHCI1, PIRQ_NC, PIRQ_NC}}, /* EHCI1: 18.2 */ + {OHCI2_DEVFN, {PIRQ_OHCI2, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI2: 19.0 */ + {EHCI2_DEVFN, {PIRQ_NC, PIRQ_EHCI2, PIRQ_NC, PIRQ_NC}}, /* EHCI2: 19.2 */ + {SMBUS_DEVFN, {PIRQ_SMBUS, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SMBUS: 20.0 */ + {IDE_DEVFN, {PIRQ_NC, PIRQ_IDE, PIRQ_NC, PIRQ_NC}}, /* IDE: 20.1 */ + {HDA_DEVFN, {PIRQ_HDA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* HDA: 20.2 */ + {SB_PCI_PORT_DEVFN, {PIRQ_E, PIRQ_F, PIRQ_G, PIRQ_H}}, /* PCI bdg: 20.4 */ + {OHCI4_DEVFN, {PIRQ_NC, PIRQ_NC, PIRQ_OHCI4, PIRQ_NC}}, /* OHCI4: 20.5 */ + {OHCI3_DEVFN, {PIRQ_OHCI3, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI3: 22.0 */ + {EHCI3_DEVFN, {PIRQ_NC, PIRQ_EHCI3, PIRQ_NC, PIRQ_NC}}, /* EHCI3: 22.2 */ + {0xFF, {0xFF, 0xFF, 0xFF, 0xFF}}, /* End of the array */ +}; + +/* PIRQ Setup */ + +extern const struct pirq_struct * pirq_data_ptr; +extern u8 * intr_data_ptr; +extern u8 * picr_data_ptr; + +static void pirq_setup(void) +{ + pirq_data_ptr = mainboard_pirq_data; + intr_data_ptr = mainboard_intr_data; + picr_data_ptr = mainboard_picr_data; +} + /** * TODO * SB CIMx callback @@ -60,11 +146,11 @@ static void mainboard_enable(device_t dev)
/* * The mainboard is the first place that we get control in ramstage. Check - * for S3 resume and call the approriate AGESA/CIMx resume functions. + * for S3 resume and call the appropriate AGESA/CIMx resume functions. */ #if CONFIG_HAVE_ACPI_RESUME acpi_slp_type = acpi_get_sleep_type(); -#endif /* CONFIG_HAVE_ACPI_RESUME */ +#endif
/* enable GPP CLK0 thru CLK3 (interleaved) */ /* disable GPP CLK4 thru SLT_GFX_CLK */ @@ -83,6 +169,9 @@ static void mainboard_enable(device_t dev) */ pm_iowrite(0x29, 0x80); pm_iowrite(0x28, 0x61); + + /* Initialize the PIRQ data structures for consumption */ + pirq_setup(); }
struct chip_operations mainboard_ops = { diff --git a/src/mainboard/jetway/nf81-t56n-lf/mptable.c b/src/mainboard/jetway/nf81-t56n-lf/mptable.c index 9be4854..0bb65df 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/mptable.c +++ b/src/mainboard/jetway/nf81-t56n-lf/mptable.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2011 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -19,133 +20,127 @@
#include <arch/io.h> +#include <arch/ioapic.h> #include <arch/smp/mpspec.h> #include <console/console.h> #include <cpu/amd/amdfam14.h> #include <device/pci.h> +#include <drivers/generic/ioapic/chip.h> #include <stdint.h> #include <string.h>
#include <southbridge/amd/cimx/sb800/SBPLATFORM.h> +#include <southbridge/amd/cimx/cimx_util.h>
-extern u8 bus_sb800[6]; +#define IO_APIC_ID (CONFIG_MAX_CPUS + 1)
+extern u8 bus_sb800[6]; extern u32 apicid_sb800; +extern u8 * intr_data_ptr;
extern u32 bus_type[256]; extern u32 sbdn_sb800;
-u8 intr_data[] = { - [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */ - [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ - [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x10,0x11,0x12,0x13 -}; - static void *smp_write_config_table(void *v) { struct mp_config_table *mc; int bus_isa; + u32 apicver_sb800;
+ /* Intialize the MP_Table */ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
mptable_init(mc, LOCAL_APIC_ADDR); - memcpy(mc->mpc_oem, "JETWAY ", 8);
+ /* + * Type 0: Processor Entries: + * LAPIC ID, LAPIC Version, CPU Flags:EN/BP, + * CPU Signature (Stepping, Model, Family), + * Feature Flags + */ smp_write_processors(mc);
+ /* Get Bus Configuration */ get_bus_conf();
+ /* + * Type 1: Bus Entries: + * Bus ID, Bus Type + */ mptable_write_buses(mc, NULL, &bus_isa);
- /* I/O APICs: APIC ID Version State Address */ - - u32 dword; - u8 byte; - - ReadPMIO(SB_PMIOA_REG34, AccWidthUint32, &dword); - dword &= 0xFFFFFFF0; - smp_write_ioapic(mc, apicid_sb800, 0x21, dword); + /* + * Type 2: I/O APICs: + * APIC ID, Version, APIC Flags:EN, Address + */ + apicid_sb800 = (io_apic_read(IO_APIC_ADDR, 0x00) >> 24); /* Get IOAPIC ID */ + apicver_sb800 = (io_apic_read(IO_APIC_ADDR, 0x01) & 0xFF); /* Get IOAPIC version */
- for (byte = 0x0; byte < sizeof(intr_data); byte ++) { - outb(byte | 0x80, 0xC00); - outb(intr_data[byte], 0xC01); - } - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + smp_write_ioapic(mc, apicid_sb800, apicver_sb800, IO_APIC_ADDR);
+ /* + * Type 3: I/O Interrupt Table Entries: + * Int Type, Int Polarity, Int Level, Source Bus ID, + * Source Bus IRQ, Dest APIC ID, Dest PIN# + */ mptable_add_isa_interrupts(mc, bus_isa, apicid_sb800, 0);
/* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb800, (pin)) -#else -#define PCI_INT(bus, dev, fn, pin) -#endif
- /* APU Internal Graphic Device*/ - PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); - PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); + /* APU Internal Graphic Device */ + PCI_INT(0x0, 0x01, 0x0, intr_data_ptr[PIRQ_C]); + PCI_INT(0x0, 0x01, 0x1, intr_data_ptr[PIRQ_D]); + + /* SMBUS / ACPI */ + PCI_INT(0x0, 0x14, 0x0, intr_data_ptr[PIRQ_SMBUS]); + + /* Southbridge HD Audio */ + PCI_INT(0x0, 0x14, 0x2, intr_data_ptr[PIRQ_HDA]);
- PCI_INT(0x0, 0x14, 0x0, 0x10); - /* Southbridge HD Audio: */ - PCI_INT(0x0, 0x14, 0x2, 0x12); + /* LPC */ + PCI_INT(0x0, 0x14, 0x3, intr_data_ptr[PIRQ_C]);
- PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); /* USB */ - PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); - PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); - PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); - PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); - PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); + /* USB */ + PCI_INT(0x0, 0x12, 0x0, intr_data_ptr[PIRQ_OHCI1]); + PCI_INT(0x0, 0x12, 0x2, intr_data_ptr[PIRQ_EHCI1]); + PCI_INT(0x0, 0x13, 0x0, intr_data_ptr[PIRQ_OHCI2]); + PCI_INT(0x0, 0x13, 0x2, intr_data_ptr[PIRQ_EHCI2]); + PCI_INT(0x0, 0x14, 0x5, intr_data_ptr[PIRQ_OHCI4]); + + /* IDE */ + PCI_INT(0x0, 0x14, 0x1, intr_data_ptr[PIRQ_IDE]);
/* SATA */ - PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); + PCI_INT(0x0, 0x11, 0x0, intr_data_ptr[PIRQ_SATA]);
- /* On-board NIC & Slot PCIE. */ + /* on board NIC & Slot PCIE */ + PCI_INT(0x1, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */ + PCI_INT(0x2, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */
/* PCI slots */ - /* PCI_SLOT 0. */ - PCI_INT(bus_sb800[1], 0x5, 0x0, 0x14); - PCI_INT(bus_sb800[1], 0x5, 0x1, 0x15); - PCI_INT(bus_sb800[1], 0x5, 0x2, 0x16); - PCI_INT(bus_sb800[1], 0x5, 0x3, 0x17); - - /* On-board Realtek NIC 1. */ - PCI_INT(bus_sb800[1], 0x6, 0x0, 0x15); - PCI_INT(bus_sb800[1], 0x6, 0x1, 0x16); - PCI_INT(bus_sb800[1], 0x6, 0x2, 0x17); - PCI_INT(bus_sb800[1], 0x6, 0x3, 0x14); - - /* PCI_SLOT 2. */ - PCI_INT(bus_sb800[1], 0x7, 0x0, 0x16); - PCI_INT(bus_sb800[1], 0x7, 0x1, 0x17); - PCI_INT(bus_sb800[1], 0x7, 0x2, 0x14); - PCI_INT(bus_sb800[1], 0x7, 0x3, 0x15); - - PCI_INT(bus_sb800[2], 0x0, 0x0, 0x12); - PCI_INT(bus_sb800[2], 0x0, 0x1, 0x13); - PCI_INT(bus_sb800[2], 0x0, 0x2, 0x14); + /* PCI_SLOT 0 */ + PCI_INT(bus_sb800[1], 0x5, 0x0, intr_data_ptr[PIRQ_E]); /* INTA -> INTE */ + PCI_INT(bus_sb800[1], 0x5, 0x1, intr_data_ptr[PIRQ_F]); /* INTB -> INTF */ + PCI_INT(bus_sb800[1], 0x5, 0x2, intr_data_ptr[PIRQ_G]); /* INTC -> INTG */ + PCI_INT(bus_sb800[1], 0x5, 0x3, intr_data_ptr[PIRQ_H]); /* INTD -> INTH */
/* On-board Realtek NIC 2. (PCIe PortA) */ - PCI_INT(0x0, 0x15, 0x0, 0x10); + PCI_INT(0x0, 0x15, 0x0, intr_data_ptr[PIRQ_E]); /* INTA -> INTE */ /* PCIe PortB */ - PCI_INT(0x0, 0x15, 0x1, 0x11); + PCI_INT(0x0, 0x15, 0x1, intr_data_ptr[PIRQ_F]); /* INTB -> INTF */ /* PCIe PortC */ - PCI_INT(0x0, 0x15, 0x2, 0x12); + PCI_INT(0x0, 0x15, 0x2, intr_data_ptr[PIRQ_G]); /* INTC -> INTG */ /* PCIe PortD */ - PCI_INT(0x0, 0x15, 0x3, 0x13); + PCI_INT(0x0, 0x15, 0x3, intr_data_ptr[PIRQ_H]); /* INTD -> INTH */ + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
- /* Local Ints: - * Type | Polarity | Trigger | Bus ID | IRQ | APIC ID PIN# - */ IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); /* There is no extension information... */ @@ -157,6 +152,6 @@ static void *smp_write_config_table(void *v) unsigned long write_smp_table(unsigned long addr) { void *v; - v = smp_write_floating_table(addr, 0); + v = smp_write_floating_table(addr, 0); /* ADDR, Enable Virtual Wire */ return (unsigned long)smp_write_config_table(v); }