Stefan Reinauer (stefan.reinauer@coreboot.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/10602
-gerrit
commit 21d040efc15b599d2482c16c4f0332bbba8e91df Author: Stefan Reinauer stefan.reinauer@coreboot.org Date: Fri Jun 19 16:27:52 2015 -0700
src/vendorcode/amd/cimx: Unify all filenames
This changes the file name schema to be consistent and similar to what the newest release (sb900) does.
Change-Id: Ia890930661ae33281f2be99b896d1a576eed1d5c Signed-off-by: Stefan Reinauer stefan.reinauer@coreboot.org --- src/vendorcode/amd/cimx/sb700/ACPILIB.c | 120 --- src/vendorcode/amd/cimx/sb700/ACPILIB.h | 61 -- src/vendorcode/amd/cimx/sb700/AMDLIB.c | 434 ----------- src/vendorcode/amd/cimx/sb700/AMDSBLIB.c | 276 ------- src/vendorcode/amd/cimx/sb700/AZALIA.c | 304 -------- src/vendorcode/amd/cimx/sb700/AcpiLib.c | 120 +++ src/vendorcode/amd/cimx/sb700/AcpiLib.h | 61 ++ src/vendorcode/amd/cimx/sb700/AmdLib.c | 434 +++++++++++ src/vendorcode/amd/cimx/sb700/AmdSbLib.c | 276 +++++++ src/vendorcode/amd/cimx/sb700/Azalia.c | 304 ++++++++ src/vendorcode/amd/cimx/sb700/DEBUG.c | 169 ----- src/vendorcode/amd/cimx/sb700/DISPATCHER.c | 208 ----- src/vendorcode/amd/cimx/sb700/Debug.c | 169 +++++ src/vendorcode/amd/cimx/sb700/Dispatcher.c | 208 +++++ src/vendorcode/amd/cimx/sb700/EC.c | 132 ---- src/vendorcode/amd/cimx/sb700/Ec.c | 132 ++++ src/vendorcode/amd/cimx/sb700/FLASH.c | 58 -- src/vendorcode/amd/cimx/sb700/Flash.c | 58 ++ src/vendorcode/amd/cimx/sb700/LEGACY.c | 38 - src/vendorcode/amd/cimx/sb700/Legacy.c | 38 + src/vendorcode/amd/cimx/sb700/Makefile.inc | 62 +- src/vendorcode/amd/cimx/sb700/SATA.c | 453 ----------- src/vendorcode/amd/cimx/sb700/SBCMN.c | 572 -------------- src/vendorcode/amd/cimx/sb700/SBCMNLIB.c | 108 --- src/vendorcode/amd/cimx/sb700/SBCMNLIB.h | 89 --- src/vendorcode/amd/cimx/sb700/SBDEF.h | 166 ---- src/vendorcode/amd/cimx/sb700/SBMAIN.c | 289 ------- src/vendorcode/amd/cimx/sb700/SBPort.c | 441 ----------- src/vendorcode/amd/cimx/sb700/SBTYPE.h | 249 ------ src/vendorcode/amd/cimx/sb700/SMM.c | 91 --- src/vendorcode/amd/cimx/sb700/Sata.c | 453 +++++++++++ src/vendorcode/amd/cimx/sb700/SbAmdLib.h | 196 +++++ src/vendorcode/amd/cimx/sb700/SbCmn.c | 572 ++++++++++++++ src/vendorcode/amd/cimx/sb700/SbCmnLib.c | 108 +++ src/vendorcode/amd/cimx/sb700/SbCmnLib.h | 89 +++ src/vendorcode/amd/cimx/sb700/SbDef.h | 166 ++++ src/vendorcode/amd/cimx/sb700/SbMain.c | 289 +++++++ src/vendorcode/amd/cimx/sb700/SbPort.c | 441 +++++++++++ src/vendorcode/amd/cimx/sb700/SbType.h | 249 ++++++ src/vendorcode/amd/cimx/sb700/Smm.c | 91 +++ src/vendorcode/amd/cimx/sb700/USB.c | 187 ----- src/vendorcode/amd/cimx/sb700/Usb.c | 187 +++++ src/vendorcode/amd/cimx/sb700/sbAMDLIB.h | 196 ----- src/vendorcode/amd/cimx/sb800/ACPILIB.c | 166 ---- src/vendorcode/amd/cimx/sb800/ACPILIB.h | 69 -- src/vendorcode/amd/cimx/sb800/AMDLIB.c | 92 --- src/vendorcode/amd/cimx/sb800/AMDSBLIB.c | 152 ---- src/vendorcode/amd/cimx/sb800/AMDSBLIB.h | 122 --- src/vendorcode/amd/cimx/sb800/AZALIA.c | 512 ------------- src/vendorcode/amd/cimx/sb800/AcpiLib.c | 166 ++++ src/vendorcode/amd/cimx/sb800/AcpiLib.h | 69 ++ src/vendorcode/amd/cimx/sb800/AmdLib.c | 92 +++ src/vendorcode/amd/cimx/sb800/AmdSbLib.c | 152 ++++ src/vendorcode/amd/cimx/sb800/AmdSbLib.h | 122 +++ src/vendorcode/amd/cimx/sb800/Azalia.c | 512 +++++++++++++ src/vendorcode/amd/cimx/sb800/DISPATCHER.c | 252 ------ src/vendorcode/amd/cimx/sb800/Dispatcher.c | 252 ++++++ src/vendorcode/amd/cimx/sb800/EC.c | 131 ---- src/vendorcode/amd/cimx/sb800/ECLIB.c | 156 ---- src/vendorcode/amd/cimx/sb800/ECfan.h | 70 -- src/vendorcode/amd/cimx/sb800/ECfanLIB.c | 96 --- src/vendorcode/amd/cimx/sb800/ECfanc.c | 204 ----- src/vendorcode/amd/cimx/sb800/Ec.c | 131 ++++ src/vendorcode/amd/cimx/sb800/EcFan.h | 70 ++ src/vendorcode/amd/cimx/sb800/EcFanLib.c | 96 +++ src/vendorcode/amd/cimx/sb800/EcFanc.c | 204 +++++ src/vendorcode/amd/cimx/sb800/EcLib.c | 156 ++++ src/vendorcode/amd/cimx/sb800/GEC.c | 145 ---- src/vendorcode/amd/cimx/sb800/Gec.c | 145 ++++ src/vendorcode/amd/cimx/sb800/IOLIB.c | 91 --- src/vendorcode/amd/cimx/sb800/IoLib.c | 91 +++ src/vendorcode/amd/cimx/sb800/LEGACY.c | 47 -- src/vendorcode/amd/cimx/sb800/Legacy.c | 47 ++ src/vendorcode/amd/cimx/sb800/MEMLIB.c | 96 --- src/vendorcode/amd/cimx/sb800/Makefile.inc | 86 +-- src/vendorcode/amd/cimx/sb800/MemLib.c | 96 +++ src/vendorcode/amd/cimx/sb800/PCILIB.c | 86 --- src/vendorcode/amd/cimx/sb800/PMIO2LIB.c | 130 ---- src/vendorcode/amd/cimx/sb800/PMIOLIB.c | 129 ---- src/vendorcode/amd/cimx/sb800/PciLib.c | 86 +++ src/vendorcode/amd/cimx/sb800/Pmio2Lib.c | 130 ++++ src/vendorcode/amd/cimx/sb800/PmioLib.c | 129 ++++ src/vendorcode/amd/cimx/sb800/SATA.c | 675 ----------------- src/vendorcode/amd/cimx/sb800/SBCMN.c | 1066 -------------------------- src/vendorcode/amd/cimx/sb800/SBDEF.h | 261 ------- src/vendorcode/amd/cimx/sb800/SBMAIN.c | 258 ------- src/vendorcode/amd/cimx/sb800/SBPELIB.c | 198 ----- src/vendorcode/amd/cimx/sb800/SBPort.c | 366 --------- src/vendorcode/amd/cimx/sb800/SBSUBFUN.h | 523 ------------- src/vendorcode/amd/cimx/sb800/SBTYPE.h | 1135 ---------------------------- src/vendorcode/amd/cimx/sb800/SMM.c | 86 --- src/vendorcode/amd/cimx/sb800/Sata.c | 675 +++++++++++++++++ src/vendorcode/amd/cimx/sb800/SbCmn.c | 1066 ++++++++++++++++++++++++++ src/vendorcode/amd/cimx/sb800/SbDef.h | 261 +++++++ src/vendorcode/amd/cimx/sb800/SbMain.c | 258 +++++++ src/vendorcode/amd/cimx/sb800/SbPeLib.c | 198 +++++ src/vendorcode/amd/cimx/sb800/SbPort.c | 366 +++++++++ src/vendorcode/amd/cimx/sb800/SbSubFun.h | 523 +++++++++++++ src/vendorcode/amd/cimx/sb800/SbType.h | 1135 ++++++++++++++++++++++++++++ src/vendorcode/amd/cimx/sb800/Smm.c | 86 +++ src/vendorcode/amd/cimx/sb800/USB.c | 431 ----------- src/vendorcode/amd/cimx/sb800/Usb.c | 431 +++++++++++ src/vendorcode/amd/cimx/sb900/Makefile.inc | 4 +- src/vendorcode/amd/cimx/sb900/SBPort.c | 737 ------------------ src/vendorcode/amd/cimx/sb900/SbPort.c | 737 ++++++++++++++++++ 105 files changed, 13199 insertions(+), 13199 deletions(-)
diff --git a/src/vendorcode/amd/cimx/sb700/ACPILIB.c b/src/vendorcode/amd/cimx/sb700/ACPILIB.c deleted file mode 100644 index 807b166..0000000 --- a/src/vendorcode/amd/cimx/sb700/ACPILIB.c +++ /dev/null @@ -1,120 +0,0 @@ -/***************************************************************************** - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - ***************************************************************************/ - - -#include "Platform.h" - -/*++ - -Routine Description: - - Locate ACPI table - -Arguments: - - Signature - table signature - -Returns: - - pointer to ACPI table - ---*/ -void* ACPI_LocateTable( - UINT32 Signature -) -{ - UINT32 i; - UINT32* RsdPtr = (UINT32*)0xe0000; - UINT32* Rsdt = NULL; - DESCRIPTION_HEADER* CurrentTable; - do{ -// if (*RsdPtr == ' DSR' && *(RsdPtr+1) == ' RTP'){ - if ((*RsdPtr == Int32FromChar ('R', 'S', 'D', ' ')) && (*(RsdPtr+1) == Int32FromChar ('R', 'T', 'P', ' '))){ - Rsdt = (UINT32*)((RSDP*)RsdPtr)->RsdtAddress; - break; - } - RsdPtr+=4; - }while (RsdPtr <= (UINT32*)0xffff0); - if(Rsdt != NULL && ACPI_GetTableChecksum(Rsdt)==0){ - for (i = 0;i < (((DESCRIPTION_HEADER*)Rsdt)->Length - sizeof(DESCRIPTION_HEADER))/4;i++){ - CurrentTable = (DESCRIPTION_HEADER*)*(UINT32*)((UINT8*)Rsdt + sizeof(DESCRIPTION_HEADER) + i*4); - if (CurrentTable->Signature == Signature) return CurrentTable; - } - } - return NULL; -} - -/*++ - -Routine Description: - - Update table checksum - -Arguments: - - TablePtr - table pointer - -Returns: - - none - ---*/ -void ACPI_SetTableChecksum( - void* TablePtr -) -{ - UINT8 Checksum = 0; - ((DESCRIPTION_HEADER*)TablePtr)->Checksum = 0; - Checksum = ACPI_GetTableChecksum(TablePtr); - ((DESCRIPTION_HEADER*)TablePtr)->Checksum = 0x100 - Checksum; -} - -/*++ - -Routine Description: - - Get table checksum - -Arguments: - - TablePtr - table pointer - -Returns: - - none - ---*/ -UINT8 ACPI_GetTableChecksum( - void* TablePtr -) -{ - return GetByteSum(TablePtr,((DESCRIPTION_HEADER*)TablePtr)->Length); -} - diff --git a/src/vendorcode/amd/cimx/sb700/ACPILIB.h b/src/vendorcode/amd/cimx/sb700/ACPILIB.h deleted file mode 100644 index 5f2734f..0000000 --- a/src/vendorcode/amd/cimx/sb700/ACPILIB.h +++ /dev/null @@ -1,61 +0,0 @@ -/*;******************************************************************************** -; -; Copyright (C) 2012 Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;*********************************************************************************/ - -#ifndef _AMD_ACPILIB_H_ -#define _AMD_ACPILIB_H_ - -typedef struct _RSDP{ - UINT64 Signature; - UINT8 Checksum; - UINT8 OEMID[6]; - UINT8 Revision; - UINT32 RsdtAddress; - UINT32 Length; - UINT64 XsdtAddress; - UINT8 ExtendedChecksum; - UINT8 Reserved[3]; -}RSDP; - -typedef struct _DESCRIPTION_HEADER{ - UINT32 Signature; - UINT32 Length; - UINT8 Revision; - UINT8 Checksum; - UINT8 OEMID[6]; - UINT8 OEMTableID[8]; - UINT32 OEMRevision; - UINT32 CreatorID; - UINT32 CreatorRevision; -}DESCRIPTION_HEADER; - -void* ACPI_LocateTable(UINT32 Signature); -void ACPI_SetTableChecksum(void* TablePtr); -UINT8 ACPI_GetTableChecksum(void* TablePtr); - -#endif //ifndef _AMD_ACPILIB_H_ diff --git a/src/vendorcode/amd/cimx/sb700/AMDLIB.c b/src/vendorcode/amd/cimx/sb700/AMDLIB.c deleted file mode 100644 index b233259..0000000 --- a/src/vendorcode/amd/cimx/sb700/AMDLIB.c +++ /dev/null @@ -1,434 +0,0 @@ -/***************************************************************************** - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - ***************************************************************************/ - - - -#include "Platform.h" - -VOID -ReadIO ( - IN UINT16 Address, - IN UINT8 OpFlag, - IN VOID* Value - ) -{ - OpFlag = OpFlag & 0x7f; - switch ( OpFlag ) { - case AccWidthUint8: - *(UINT8*)Value = ReadIo8 (Address); - break; - case AccWidthUint16: - *(UINT16*)Value = ReadIo16 (Address); - break; - case AccWidthUint32: - *(UINT32*)Value = ReadIo32 (Address); - break; - default: - break; - } -} - -VOID -WriteIO ( - IN UINT16 Address, - IN UINT8 OpFlag, - IN VOID* Value - ) -{ - OpFlag = OpFlag & 0x7f; - switch ( OpFlag ) { - case AccWidthUint8: - WriteIo8 (Address, *(UINT8*)Value); - break; - case AccWidthUint16: - WriteIo16 (Address, *(UINT16*)Value); - break; - case AccWidthUint32: - WriteIo32 (Address, *(UINT32*)Value); - break; - default: - break; - } -} - -VOID -RWIO ( - IN UINT16 Address, - IN UINT8 OpFlag, - IN UINT32 Mask, - IN UINT32 Data - ) -{ - UINT32 Result; - ReadIO (Address, OpFlag, &Result); - Result = (Result & Mask) | Data; - WriteIO (Address, OpFlag, &Result); -} - - -VOID -ReadPCI ( - IN UINT32 Address, - IN UINT8 OpFlag, - IN VOID* Value - ) -{ - OpFlag = OpFlag & 0x7f; - - if ( (UINT16)Address < 0xff ) { - //Normal Config Access - UINT32 AddrCf8; - AddrCf8 = (1 << 31) + ((Address >> 8) & 0x0FFFF00) + (Address & 0xFC); - WriteIO (0xCf8, AccWidthUint32, &AddrCf8); - ReadIO ((UINT16) (0xCfC + (Address & 0x3)), OpFlag, Value); - } -} - -VOID -WritePCI ( - IN UINT32 Address, - IN UINT8 OpFlag, - IN VOID* Value - ) -{ - OpFlag = OpFlag & 0x7f; - if ( (UINT16)Address < 0xff ) { - //Normal Config Access - UINT32 AddrCf8; - AddrCf8 = (1 << 31) + ((Address >> 8)&0x0FFFF00) + (Address & 0xFC); - WriteIO (0xCf8, AccWidthUint32, &AddrCf8); - WriteIO ((UINT16) (0xCfC + (Address & 0x3)), OpFlag, Value); - } -} - -VOID -RWPCI ( - IN UINT32 Address, - IN UINT8 OpFlag, - IN UINT32 Mask, - IN UINT32 Data - ) -{ - UINT32 Result; - Result = 0; - OpFlag = OpFlag & 0x7f; - ReadPCI (Address, OpFlag, &Result); - Result = (Result & Mask) | Data; - WritePCI (Address, OpFlag, &Result); -} - -void -ReadIndexPCI32 ( -UINT32 PciAddress, -UINT32 IndexAddress, -void* Value -) -{ - WritePCI(PciAddress,AccWidthUint32,&IndexAddress); - ReadPCI(PciAddress+4,AccWidthUint32,Value); -} - -void -WriteIndexPCI32 ( -UINT32 PciAddress, -UINT32 IndexAddress, -UINT8 OpFlag, -void* Value -) -{ - - WritePCI(PciAddress,AccWidthUint32 | (OpFlag & 0x80),&IndexAddress); - WritePCI(PciAddress+4,AccWidthUint32 | (OpFlag & 0x80) ,Value); -} - -void -RWIndexPCI32 ( -UINT32 PciAddress, -UINT32 IndexAddress, -UINT8 OpFlag, -UINT32 Mask, -UINT32 Data -) -{ - UINT32 Result; - ReadIndexPCI32(PciAddress,IndexAddress,&Result); - Result = (Result & Mask)| Data; - WriteIndexPCI32(PciAddress,IndexAddress,(OpFlag & 0x80),&Result); - -} - -void -ReadMEM ( -UINT32 Address, -UINT8 OpFlag, -void* Value -) -{ - OpFlag = OpFlag & 0x7f; - switch (OpFlag){ - case AccWidthUint8 : *((UINT8*)Value)=*((UINT8*)Address);break; - case AccWidthUint16: *((UINT16*)Value)=*((UINT16*)Address);break; - case AccWidthUint32: *((UINT32*)Value)=*((UINT32*)Address);break; - } -} - -void -WriteMEM ( -UINT32 Address, -UINT8 OpFlag, -void* Value -) -{ - OpFlag = OpFlag & 0x7f; - switch (OpFlag){ - case AccWidthUint8 : *((UINT8*)Address)=*((UINT8*)Value);break; - case AccWidthUint16: *((UINT16*)Address)=*((UINT16*)Value);break; - case AccWidthUint32: *((UINT32*)Address)=*((UINT32*)Value);break; - } -} - -void -RWMEM ( -UINT32 Address, -UINT8 OpFlag, -UINT32 Mask, -UINT32 Data -) -{ - UINT32 Result; - ReadMEM(Address,OpFlag,&Result); - Result = (Result & Mask)| Data; - WriteMEM(Address,OpFlag,&Result); -} - - -void -RWMSR( -UINT32 Address, -UINT64 Mask, -UINT64 Value -) -{ - MsrWrite(Address,(MsrRead(Address)& Mask)|Value); -} - -UINT32 -IsFamily10() -{ - CPUID_DATA Cpuid; - CpuidRead(0x1,(CPUID_DATA *)&Cpuid); - - return Cpuid.REG_EAX & 0xff00000; -} - - -UINT8 GetNumberOfCpuCores(void) -{ - UINT8 Result=1; - Result=ReadNumberOfCpuCores(); - return Result; -} - - -void -Stall( -UINT32 uSec -) -{ - UINT16 timerAddr; - UINT32 startTime, elapsedTime; - ReadPMIO(SB_PMIO_REG24, AccWidthUint16, &timerAddr); - - if (timerAddr ==0){ - uSec = uSec/2; - while (uSec!=0){ - ReadIO(0x80,AccWidthUint8,(UINT8 *)(&startTime)); - uSec--; - } - } - else{ - ReadIO(timerAddr, AccWidthUint32,&startTime); - while (1){ - ReadIO(timerAddr, AccWidthUint32,&elapsedTime); - if (elapsedTime < startTime) - elapsedTime = elapsedTime+0xFFFFFFFF-startTime; - else - elapsedTime = elapsedTime-startTime; - if ((elapsedTime*28/100)>uSec) - break; - } - } -} - - -void -Reset( -) -{ - RWIO(0xcf9,AccWidthUint8,0x0,0x06); -} - - -CIM_STATUS -RWSMBUSBlock( -UINT8 Controller, -UINT8 Address, -UINT8 Offset, -UINT8 BufferSize, -UINT8* BufferPrt -) -{ - UINT16 SmbusPort; - UINT8 i; - UINT8 Status; - ReadPCI(PCI_ADDRESS(0,0x14,0,Controller?0x58:0x10),AccWidthUint16,&SmbusPort); - SmbusPort &= 0xfffe; - RWIO(SmbusPort + 0,AccWidthUint8,0x0,0xff); - RWIO(SmbusPort + 4,AccWidthUint8,0x0,Address); - RWIO(SmbusPort + 3,AccWidthUint8,0x0,Offset); - RWIO(SmbusPort + 2,AccWidthUint8,0x0,0x14); - RWIO(SmbusPort + 5,AccWidthUint8,0x0,BufferSize); - if(!(Address & 0x1)){ - for (i = 0 ;i < BufferSize;i++){ - WriteIO(SmbusPort + 7,AccWidthUint8,&BufferPrt[i]); - } - } - RWIO(SmbusPort + 2,AccWidthUint8,0x0,0x54); - do{ - ReadIO(SmbusPort + 0,AccWidthUint8,&Status); - if (Status & 0x1C) return CIM_ERROR; - if (Status & 0x02) break; - }while(!(Status & 0x1)); - - do{ - ReadIO(SmbusPort + 0,AccWidthUint8,&Status); - }while(Status & 0x1); - - if(Address & 0x1){ - for (i = 0 ;i < BufferSize;i++){ - ReadIO(SmbusPort + 7,AccWidthUint8,&BufferPrt[i]); - } - } - return CIM_SUCCESS; -} - - - -void outPort80(UINT32 pcode) -{ - WriteIO(0x80, AccWidthUint8, &pcode); - return; -} - - -UINT8 -GetByteSum( - void* pData, - UINT32 Length -) -{ - UINT32 i; - UINT8 Checksum = 0; - for (i = 0;i < Length;i++){ - Checksum += *((UINT8*)pData+i); - } - return Checksum; -} - - -UINT32 -readAlink( - UINT32 Index -){ - UINT32 Data; - WriteIO(ALINK_ACCESS_INDEX, AccWidthUint32, &Index); - ReadIO(ALINK_ACCESS_DATA, AccWidthUint32, &Data); - //Clear Index - Index=0; - WriteIO(ALINK_ACCESS_INDEX, AccWidthUint32, &Index); - return Data; -} - - -void -writeAlink( - UINT32 Index, - UINT32 Data -){ - WriteIO(ALINK_ACCESS_INDEX, AccWidthUint32, &Index); - WriteIO(ALINK_ACCESS_DATA, AccWidthUint32, &Data); - //Clear Index - Index=0; - WriteIO(ALINK_ACCESS_INDEX, AccWidthUint32, &Index); - -} - - -/** - * - * IsServer - Determine if southbridge type is SP5100 (server) or SB7x0 (non-server) - * - * A SP5100 is determined when both following two items are true: - * 1) Revision >= A14; - * 2) A server north bridge chipset is detected; - * - * A list of server north bridge chipset: - * - * Family DeviceID - * ---------------------- - * SR5690 0x5A10 - * SR5670 0x5A12 - * SR5650 0x5A13 - * - */ -UINT8 -IsServer (void){ - UINT16 DevID; - - if (getRevisionID () < SB700_A14) { - return 0; - } - ReadPCI ((NB_BDF << 16) + 2, AccWidthUint16, &DevID); - return ((DevID == 0x5a10) || (DevID == 0x5a12) || (DevID == 0x5a13))? 1: 0; -} - -/** - * - * IsLS2Mode - Determine if LS2 mode is enabled or not in northbridge. - * - */ -UINT8 -IsLs2Mode (void) -{ - UINT32 HT3LinkTraining0; - - ReadPCI ((NB_BDF << 16) + 0xAC, AccWidthUint32, &HT3LinkTraining0); - return ( HT3LinkTraining0 & 0x100 )? 1: 0; -} diff --git a/src/vendorcode/amd/cimx/sb700/AMDSBLIB.c b/src/vendorcode/amd/cimx/sb700/AMDSBLIB.c deleted file mode 100644 index bf4f06a..0000000 --- a/src/vendorcode/amd/cimx/sb700/AMDSBLIB.c +++ /dev/null @@ -1,276 +0,0 @@ -/***************************************************************************** - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - ***************************************************************************/ - - -#include "Platform.h" - - -void -ReadPMIO ( -UINT8 Address, -UINT8 OpFlag, -void* Value -) -{ - UINT8 i; - - OpFlag = OpFlag & 0x7f; - if (OpFlag == 0x02) OpFlag = 0x03; - for (i=0;i<=OpFlag;i++){ - WriteIO(0xCD6, AccWidthUint8, &Address); // SB_IOMAP_REGCD6 - Address++; - ReadIO(0xCD7, AccWidthUint8, (UINT8 *)Value+i); // SB_IOMAP_REGCD7 - } -} - - -void -WritePMIO ( -UINT8 Address, -UINT8 OpFlag, -void* Value -) -{ - UINT8 i; - - OpFlag = OpFlag & 0x7f; - if (OpFlag == 0x02) OpFlag = 0x03; - for (i=0;i<=OpFlag;i++){ - WriteIO(0xCD6, AccWidthUint8, &Address); // SB_IOMAP_REGCD6 - Address++; - WriteIO(0xCD7, AccWidthUint8, (UINT8 *)Value+i); // SB_IOMAP_REGCD7 - } -} - - -void -RWPMIO ( -UINT8 Address, -UINT8 OpFlag, -UINT32 AndMask, -UINT32 OrMask -) -{ - UINT32 Result; - - OpFlag = OpFlag & 0x7f; - ReadPMIO(Address,OpFlag,&Result); - Result = (Result & AndMask)| OrMask; - WritePMIO(Address,OpFlag,&Result); -} - - -void -ReadPMIO2 ( -UINT8 Address, -UINT8 OpFlag, -void* Value -) -{ - UINT8 i; - - OpFlag = OpFlag & 0x7f; - if (OpFlag == 0x02) OpFlag = 0x03; - for (i=0;i<=OpFlag;i++){ - WriteIO(0xCD0, AccWidthUint8, &Address); // SB_IOMAP_REGCD0 - Address++; - ReadIO(0xCD1, AccWidthUint8, (UINT8 *)Value+i); // SB_IOMAP_REGCD1 - } -} - - -void -WritePMIO2 ( -UINT8 Address, -UINT8 OpFlag, -void* Value -) -{ - UINT8 i; - - OpFlag = OpFlag & 0x7f; - if (OpFlag == 0x02) OpFlag = 0x03; - for (i=0;i<=OpFlag;i++){ - WriteIO(0xCD0, AccWidthUint8, &Address); // SB_IOMAP_REGCD0 - Address++; - WriteIO(0xCD1, AccWidthUint8, (UINT8 *)Value+i); // SB_IOMAP_REGCD1 - } -} - - -void -RWPMIO2 ( -UINT8 Address, -UINT8 OpFlag, -UINT32 AndMask, -UINT32 OrMask -) -{ - UINT32 Result; - - OpFlag = OpFlag & 0x7f; - ReadPMIO2(Address,OpFlag,&Result); - Result = (Result & AndMask)| OrMask; - WritePMIO2(Address,OpFlag,&Result); -} - - -void -EnterEcConfig() -{ - UINT16 dwEcIndexPort; - - ReadPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwEcIndexPort); - dwEcIndexPort &= ~(UINT16)(BIT0); - RWIO(dwEcIndexPort, AccWidthUint8, 0x00, 0x5A); -} - -void -ExitEcConfig() -{ - UINT16 dwEcIndexPort; - - ReadPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwEcIndexPort); - dwEcIndexPort &= ~(UINT16)(BIT0); - RWIO(dwEcIndexPort, AccWidthUint8, 0x00, 0xA5); -} - - -void -ReadEC8 ( -UINT8 Address, -UINT8* Value -) -{ - UINT16 dwEcIndexPort; - - ReadPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwEcIndexPort); - dwEcIndexPort &= ~(UINT16)(BIT0); - WriteIO(dwEcIndexPort, AccWidthUint8, &Address); // SB_IOMAP_REGCD6 - ReadIO(dwEcIndexPort+1, AccWidthUint8, Value); // SB_IOMAP_REGCD7 -} - - -void -WriteEC8 ( -UINT8 Address, -UINT8* Value -) -{ - UINT16 dwEcIndexPort; - - ReadPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwEcIndexPort); - dwEcIndexPort &= ~(UINT16)(BIT0); - WriteIO(dwEcIndexPort, AccWidthUint8, &Address); // SB_IOMAP_REGCD6 - WriteIO(dwEcIndexPort+1, AccWidthUint8, Value); // SB_IOMAP_REGCD7 -} - - -void -RWEC8 ( -UINT8 Address, -UINT8 AndMask, -UINT8 OrMask -) -{ - UINT8 Result; - ReadEC8(Address,&Result); - Result = (Result & AndMask)| OrMask; - WriteEC8(Address, &Result); -} - - -void -programPciByteTable ( -REG8MASK* pPciByteTable, -UINT16 dwTableSize -) -{ - UINT8 i, dbBusNo, dbDevFnNo; - UINT32 ddBDFR; - - dbBusNo = pPciByteTable->bRegIndex; - dbDevFnNo = pPciByteTable->bANDMask; - pPciByteTable++; - for (i = 1; i < dwTableSize; i++){ - if ( (pPciByteTable->bRegIndex==0xFF) && (pPciByteTable->bANDMask==0xFF) && (pPciByteTable->bORMask==0xFF) ){ - pPciByteTable++; - dbBusNo = pPciByteTable->bRegIndex; - dbDevFnNo = pPciByteTable->bANDMask; - } - else{ - ddBDFR = (dbBusNo << 24) + (dbDevFnNo << 16) + (pPciByteTable->bRegIndex) ; - TRACE((DMSG_SB_TRACE, "PFA=%X AND=%X, OR=%X\n", ddBDFR, pPciByteTable->bANDMask, pPciByteTable->bORMask)); - RWPCI(ddBDFR, AccWidthUint8 | S3_SAVE, pPciByteTable->bANDMask, pPciByteTable->bORMask); - pPciByteTable++; - } - } -} - - -void -programPmioByteTable ( -REG8MASK* pPmioByteTable, -UINT16 dwTableSize -) -{ - UINT8 i; - for (i = 0; i < dwTableSize; i++){ - TRACE((DMSG_SB_TRACE, "PMIO Reg = %X AndMask = %X OrMask = %X\n",pPmioByteTable->bRegIndex,pPmioByteTable->bANDMask, pPmioByteTable->bORMask)); - RWPMIO(pPmioByteTable->bRegIndex, AccWidthUint8 , pPmioByteTable->bANDMask, pPmioByteTable->bORMask); - pPmioByteTable++; - } -} - - -UINT8 -getClockMode ( -void -) -{ - UINT8 dbTemp=0; - - RWPMIO(SB_PMIO_REGB2, AccWidthUint8, 0xFF, BIT7); - ReadPMIO(SB_PMIO_REGB0, AccWidthUint8, &dbTemp); - return(dbTemp&BIT4); -} - - -UINT16 -readStrapStatus ( -void -) -{ - UINT16 dwTemp=0; - - RWPMIO(SB_PMIO_REGB2, AccWidthUint8, 0xFF, BIT7); - ReadPMIO(SB_PMIO_REGB0, AccWidthUint16, &dwTemp); - return(dwTemp); -} diff --git a/src/vendorcode/amd/cimx/sb700/AZALIA.c b/src/vendorcode/amd/cimx/sb700/AZALIA.c deleted file mode 100644 index cc72858..0000000 --- a/src/vendorcode/amd/cimx/sb700/AZALIA.c +++ /dev/null @@ -1,304 +0,0 @@ -/***************************************************************************** - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - ***************************************************************************/ - - - -#include "Platform.h" - -void configureAzaliaPinCmd (AMDSBCFG* pConfig, UINT32 ddBAR0, UINT8 dbChannelNum); -void configureAzaliaSetConfigD4Dword(CODECENTRY* tempAzaliaCodecEntryPtr, UINT32 ddChannelNum, UINT32 ddBAR0); - -//Pin Config for ALC880, ALC882 and ALC883: -CODECENTRY AzaliaCodecAlc882Table[] = { - {0x14, 0x01014010}, - {0x15, 0x01011012}, - {0x16, 0x01016011}, - {0x17, 0x01012014}, - {0x18, 0x01A19030}, - {0x19, 0x411111F0}, - {0x1a, 0x01813080}, - {0x1b, 0x411111F0}, - {0x1C, 0x411111F0}, - {0x1d, 0x411111F0}, - {0x1e, 0x01441150}, - {0x1f, 0x01C46160}, - {0xff, 0xffffffff} -}; - - -//Pin Config for ALC262 -CODECENTRY AzaliaCodecAlc262Table[] = { - {0x14, 0x01014010}, - {0x15, 0x411111F0}, - {0x16, 0x411111F0}, -// {0x17, 0x01012014}, - {0x18, 0x01A19830}, - {0x19, 0x02A19C40}, - {0x1a, 0x01813031}, - {0x1b, 0x02014C20}, - {0x1c, 0x411111F0}, - {0x1d, 0x411111F0}, - {0x1e, 0x0144111E}, - {0x1f, 0x01C46150}, - {0xff, 0xffffffff} -}; - -//Pin Config for ALC0861: -CODECENTRY AzaliaCodecAlc861Table[] = { - {0x01, 0x8086C601}, - {0x0B, 0x01014110}, - {0x0C, 0x01813140}, - {0x0D, 0x01A19941}, - {0x0E, 0x411111F0}, - {0x0F, 0x02214420}, - {0x10, 0x02A1994E}, - {0x11, 0x99330142}, - {0x12, 0x01451130}, - {0x1F, 0x411111F0}, - {0x20, 0x411111F0}, - {0x23, 0x411111F0}, - {0xff, 0xffffffff} -}; - -//Pin Config for ADI1984: -CODECENTRY AzaliaCodecAd1984Table[] = { - {0x11, 0x0221401F}, - {0x12, 0x90170110}, - {0x13, 0x511301F0}, - {0x14, 0x02A15020}, - {0x15, 0x50A301F0}, - {0x16, 0x593301F0}, - {0x17, 0x55A601F0}, - {0x18, 0x55A601F0}, - {0x1A, 0x91F311F0}, - {0x1B, 0x014511A0}, - {0x1C, 0x599301F0}, - {0xff, 0xffffffff} -}; - - -CODECENTRY FrontPanelAzaliaCodecTableList[] = { - {0x19, 0x02A19040}, - {0x1b, 0x02214020}, - {0xff, 0xffffffff} -}; - - -CODECTBLLIST azaliaCodecTableList[] = { - {0x010ec0880, &AzaliaCodecAlc882Table[0]}, - {0x010ec0882, &AzaliaCodecAlc882Table[0]}, - {0x010ec0883, &AzaliaCodecAlc882Table[0]}, - {0x010ec0885, &AzaliaCodecAlc882Table[0]}, - {0x010ec0262, &AzaliaCodecAlc262Table[0]}, - {0x010ec0861, &AzaliaCodecAlc861Table[0]}, - {0x011d41984, &AzaliaCodecAd1984Table[0]}, - {(UINT32)0x0FFFFFFFF, (CODECENTRY*)0xFFFFFFFF} -}; - - -/*------------------------------------------------------------------------------- -; Procedure: azaliaInitAfterPciEnum -; -; Description: This routine detects Azalia and, if present, initializes Azalia -; This routine is called from atiSbAfterPciInit -; -; -; Exit: None -; -; Modified: None -; -;----------------------------------------------------------------------------- -*/ -void azaliaInitAfterPciEnum (AMDSBCFG* pConfig){ - UINT8 i, dbEnableAzalia=0, dbPinRouting, dbChannelNum=0, dbTempVariable = 0; - UINT16 dwTempVariable = 0; - UINT32 ddBAR0, ddTempVariable = 0; - - if (pConfig->AzaliaController == 1) return; - - if (pConfig->AzaliaController != 1){ - RWPCI((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG04, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT1, BIT1); - ReadPCI((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG10, AccWidthUint32, &ddBAR0); - - if (ddBAR0 != 0){ //Keep the flag as disabled if BAR is 0 or all "F"s. - if (ddBAR0 != 0xFFFFFFFF){ - ddBAR0 &= ~(0x03FFF); - dbEnableAzalia = 1; - TRACE((DMSG_SB_TRACE, "CIMxSB - Enabling Azalia controller (BAR setup is ok) \n")); - } - } - } - - if (dbEnableAzalia){ //if Azalia is enabled - //Get SDIN Configuration - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGF8, AccWidthUint32 | S3_SAVE, 0, ddTempVariable); - ddTempVariable |= (pConfig->AzaliaSdin3 << 6); - ddTempVariable |= (pConfig->AzaliaSdin2 << 4); - ddTempVariable |= (pConfig->AzaliaSdin1 << 2); - ddTempVariable |= pConfig->AzaliaSdin0; - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGFC, AccWidthUint8 | S3_SAVE, 0, (ddTempVariable & 0xFF)); - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG60+3, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT2+BIT1+BIT0), 0); - - i=11; - do{ - ReadMEM( ddBAR0+SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); - dbTempVariable |= BIT0; - WriteMEM(ddBAR0+SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); - Stall(1000); - ReadMEM(ddBAR0+SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); - i--; - } while ( (!(dbTempVariable & BIT0)) && (i > 0) ); - - if (i==0){ - TRACE((DMSG_SB_TRACE, "CIMxSB - Problem in resetting Azalia controller\n")); - return; - } - - Stall(1000); - ReadMEM( ddBAR0+SB_AZ_BAR_REG0E, AccWidthUint16, &dwTempVariable); - if (dwTempVariable & 0x0F){ - TRACE((DMSG_SB_TRACE, "CIMxSB - Atleast One Azalia CODEC found \n")); - //atleast one azalia codec found - ReadPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGFC, AccWidthUint8, &dbPinRouting); - do{ - if ( ( !(dbPinRouting & BIT0) ) && (dbPinRouting & BIT1) ) - configureAzaliaPinCmd(pConfig, ddBAR0, dbChannelNum); - dbPinRouting >>= 2; - dbChannelNum++; - } while (dbChannelNum != 4); - } - else{ - TRACE((DMSG_SB_TRACE, "CIMxSB - Azalia CODEC NOT found \n")); - //No Azalia codec found - if (pConfig->AzaliaController != 2) - dbEnableAzalia = 0; //set flag to disable Azalia - } - } - - if (dbEnableAzalia){ - //redo clear reset - do{ - dwTempVariable = 0; - WriteMEM( ddBAR0+SB_AZ_BAR_REG0C, AccWidthUint16 | S3_SAVE, &dwTempVariable); - ReadMEM(ddBAR0+SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); - dbTempVariable &= ~(UINT8)(BIT0); - WriteMEM(ddBAR0+SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); - ReadMEM(ddBAR0+SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); - } while (dbTempVariable & BIT0); - - if (pConfig->AzaliaSnoop == 1) - RWPCI((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG42, AccWidthUint8 | S3_SAVE, 0xFF, BIT1+BIT0); - } - else{ - //disable Azalia controller - RWPCI((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG04, AccWidthUint16 | S3_SAVE, 0, 0); - RWPMIO(SB_PMIO_REG59, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT3, 0); - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGFC, AccWidthUint8 | S3_SAVE, 0, 0x55); - } -} - - -void configureAzaliaPinCmd (AMDSBCFG* pConfig, UINT32 ddBAR0, UINT8 dbChannelNum){ - UINT32 ddTempVariable, ddChannelNum; - CODECTBLLIST* ptempAzaliaOemCodecTablePtr; - CODECENTRY* tempAzaliaCodecEntryPtr; - - if ((pConfig->AzaliaPinCfg) != 1) - return; - - ddChannelNum = dbChannelNum << 28; - ddTempVariable = 0xF0000; - ddTempVariable |= ddChannelNum; - WriteMEM(ddBAR0 + SB_AZ_BAR_REG60, AccWidthUint32 | S3_SAVE, &ddTempVariable); - Stall(60); - ReadMEM(ddBAR0 + SB_AZ_BAR_REG64, AccWidthUint32 | S3_SAVE, &ddTempVariable); - - if ( ((pConfig->pAzaliaOemCodecTablePtr) == NULL) || ((pConfig->pAzaliaOemCodecTablePtr) == ((CODECTBLLIST*) 0xFFFFFFFF)) ) - ptempAzaliaOemCodecTablePtr = (CODECTBLLIST*) FIXUP_PTR(&azaliaCodecTableList[0]); - else - ptempAzaliaOemCodecTablePtr = (CODECTBLLIST*) pConfig->pAzaliaOemCodecTablePtr; - - TRACE((DMSG_SB_TRACE, "CIMxSB - Azalia CODEC table pointer is %x \n", (UINT32)ptempAzaliaOemCodecTablePtr)); - - while ( ptempAzaliaOemCodecTablePtr->CodecID != 0xFFFFFFFF){ - if ( ptempAzaliaOemCodecTablePtr->CodecID == ddTempVariable) - break; - else - ++ptempAzaliaOemCodecTablePtr; - } - - if ( ptempAzaliaOemCodecTablePtr->CodecID != 0xFFFFFFFF){ - TRACE((DMSG_SB_TRACE, "CIMxSB - Matching CODEC ID found \n")); - tempAzaliaCodecEntryPtr = (CODECENTRY*) ptempAzaliaOemCodecTablePtr->CodecTablePtr; - TRACE((DMSG_SB_TRACE, "CIMxSB - Matching Azalia CODEC table pointer is %x \n", (UINT32)tempAzaliaCodecEntryPtr)); - - if ( ((pConfig->pAzaliaOemCodecTablePtr) == NULL) || ((pConfig->pAzaliaOemCodecTablePtr) == ((CODECTBLLIST*) 0xFFFFFFFF)) ) - tempAzaliaCodecEntryPtr = (CODECENTRY*) FIXUP_PTR(tempAzaliaCodecEntryPtr); - - configureAzaliaSetConfigD4Dword(tempAzaliaCodecEntryPtr, ddChannelNum, ddBAR0); - if (pConfig->AzaliaFrontPanel != 1){ - if ( (pConfig->AzaliaFrontPanel == 2) || (pConfig->FrontPanelDetected == 1) ){ - if ( ((pConfig->pAzaliaOemFpCodecTableptr) == NULL) || ((pConfig->pAzaliaOemFpCodecTableptr) == 0xFFFFFFFF)) - tempAzaliaCodecEntryPtr = (CODECENTRY*) FIXUP_PTR(&FrontPanelAzaliaCodecTableList[0]); - else - tempAzaliaCodecEntryPtr = (CODECENTRY*) pConfig->pAzaliaOemFpCodecTableptr; - configureAzaliaSetConfigD4Dword(tempAzaliaCodecEntryPtr, ddChannelNum, ddBAR0); - } - } - } -} - - -void configureAzaliaSetConfigD4Dword(CODECENTRY* tempAzaliaCodecEntryPtr, UINT32 ddChannelNum, UINT32 ddBAR0){ - UINT8 dbtemp1,dbtemp2, i; - UINT32 ddtemp=0,ddtemp2=0; - - while ((tempAzaliaCodecEntryPtr->Nid) != 0xFF){ - dbtemp1=0x20; - if ((tempAzaliaCodecEntryPtr->Nid) == 0x1) - dbtemp1=0x24; - ddtemp = tempAzaliaCodecEntryPtr->Nid; - ddtemp &= 0xff; - ddtemp <<= 20; - ddtemp |= ddChannelNum; - ddtemp |= (0x700 << 8); - for(i=4; i>0; i--){ - do{ - ReadMEM(ddBAR0 + SB_AZ_BAR_REG68, AccWidthUint32, &ddtemp2); - } while (ddtemp2 & BIT0); - dbtemp2 = ( (tempAzaliaCodecEntryPtr->Byte40) >> ((4-i) * 8 ) ) & 0xff; - ddtemp = (ddtemp & 0xFFFF0000)+ ((dbtemp1 - i) << 8) + dbtemp2; - WriteMEM(ddBAR0 + SB_AZ_BAR_REG60, AccWidthUint32 | S3_SAVE, &ddtemp); - Stall(60); - } - ++tempAzaliaCodecEntryPtr; - } -} - diff --git a/src/vendorcode/amd/cimx/sb700/AcpiLib.c b/src/vendorcode/amd/cimx/sb700/AcpiLib.c new file mode 100644 index 0000000..807b166 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/AcpiLib.c @@ -0,0 +1,120 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + +/*++ + +Routine Description: + + Locate ACPI table + +Arguments: + + Signature - table signature + +Returns: + + pointer to ACPI table + +--*/ +void* ACPI_LocateTable( + UINT32 Signature +) +{ + UINT32 i; + UINT32* RsdPtr = (UINT32*)0xe0000; + UINT32* Rsdt = NULL; + DESCRIPTION_HEADER* CurrentTable; + do{ +// if (*RsdPtr == ' DSR' && *(RsdPtr+1) == ' RTP'){ + if ((*RsdPtr == Int32FromChar ('R', 'S', 'D', ' ')) && (*(RsdPtr+1) == Int32FromChar ('R', 'T', 'P', ' '))){ + Rsdt = (UINT32*)((RSDP*)RsdPtr)->RsdtAddress; + break; + } + RsdPtr+=4; + }while (RsdPtr <= (UINT32*)0xffff0); + if(Rsdt != NULL && ACPI_GetTableChecksum(Rsdt)==0){ + for (i = 0;i < (((DESCRIPTION_HEADER*)Rsdt)->Length - sizeof(DESCRIPTION_HEADER))/4;i++){ + CurrentTable = (DESCRIPTION_HEADER*)*(UINT32*)((UINT8*)Rsdt + sizeof(DESCRIPTION_HEADER) + i*4); + if (CurrentTable->Signature == Signature) return CurrentTable; + } + } + return NULL; +} + +/*++ + +Routine Description: + + Update table checksum + +Arguments: + + TablePtr - table pointer + +Returns: + + none + +--*/ +void ACPI_SetTableChecksum( + void* TablePtr +) +{ + UINT8 Checksum = 0; + ((DESCRIPTION_HEADER*)TablePtr)->Checksum = 0; + Checksum = ACPI_GetTableChecksum(TablePtr); + ((DESCRIPTION_HEADER*)TablePtr)->Checksum = 0x100 - Checksum; +} + +/*++ + +Routine Description: + + Get table checksum + +Arguments: + + TablePtr - table pointer + +Returns: + + none + +--*/ +UINT8 ACPI_GetTableChecksum( + void* TablePtr +) +{ + return GetByteSum(TablePtr,((DESCRIPTION_HEADER*)TablePtr)->Length); +} + diff --git a/src/vendorcode/amd/cimx/sb700/AcpiLib.h b/src/vendorcode/amd/cimx/sb700/AcpiLib.h new file mode 100644 index 0000000..5f2734f --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/AcpiLib.h @@ -0,0 +1,61 @@ +/*;******************************************************************************** +; +; Copyright (C) 2012 Advanced Micro Devices, Inc. +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; * Redistributions of source code must retain the above copyright +; notice, this list of conditions and the following disclaimer. +; * Redistributions in binary form must reproduce the above copyright +; notice, this list of conditions and the following disclaimer in the +; documentation and/or other materials provided with the distribution. +; * Neither the name of Advanced Micro Devices, Inc. nor the names of +; its contributors may be used to endorse or promote products derived +; from this software without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY +; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;*********************************************************************************/ + +#ifndef _AMD_ACPILIB_H_ +#define _AMD_ACPILIB_H_ + +typedef struct _RSDP{ + UINT64 Signature; + UINT8 Checksum; + UINT8 OEMID[6]; + UINT8 Revision; + UINT32 RsdtAddress; + UINT32 Length; + UINT64 XsdtAddress; + UINT8 ExtendedChecksum; + UINT8 Reserved[3]; +}RSDP; + +typedef struct _DESCRIPTION_HEADER{ + UINT32 Signature; + UINT32 Length; + UINT8 Revision; + UINT8 Checksum; + UINT8 OEMID[6]; + UINT8 OEMTableID[8]; + UINT32 OEMRevision; + UINT32 CreatorID; + UINT32 CreatorRevision; +}DESCRIPTION_HEADER; + +void* ACPI_LocateTable(UINT32 Signature); +void ACPI_SetTableChecksum(void* TablePtr); +UINT8 ACPI_GetTableChecksum(void* TablePtr); + +#endif //ifndef _AMD_ACPILIB_H_ diff --git a/src/vendorcode/amd/cimx/sb700/AmdLib.c b/src/vendorcode/amd/cimx/sb700/AmdLib.c new file mode 100644 index 0000000..b233259 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/AmdLib.c @@ -0,0 +1,434 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + + +#include "Platform.h" + +VOID +ReadIO ( + IN UINT16 Address, + IN UINT8 OpFlag, + IN VOID* Value + ) +{ + OpFlag = OpFlag & 0x7f; + switch ( OpFlag ) { + case AccWidthUint8: + *(UINT8*)Value = ReadIo8 (Address); + break; + case AccWidthUint16: + *(UINT16*)Value = ReadIo16 (Address); + break; + case AccWidthUint32: + *(UINT32*)Value = ReadIo32 (Address); + break; + default: + break; + } +} + +VOID +WriteIO ( + IN UINT16 Address, + IN UINT8 OpFlag, + IN VOID* Value + ) +{ + OpFlag = OpFlag & 0x7f; + switch ( OpFlag ) { + case AccWidthUint8: + WriteIo8 (Address, *(UINT8*)Value); + break; + case AccWidthUint16: + WriteIo16 (Address, *(UINT16*)Value); + break; + case AccWidthUint32: + WriteIo32 (Address, *(UINT32*)Value); + break; + default: + break; + } +} + +VOID +RWIO ( + IN UINT16 Address, + IN UINT8 OpFlag, + IN UINT32 Mask, + IN UINT32 Data + ) +{ + UINT32 Result; + ReadIO (Address, OpFlag, &Result); + Result = (Result & Mask) | Data; + WriteIO (Address, OpFlag, &Result); +} + + +VOID +ReadPCI ( + IN UINT32 Address, + IN UINT8 OpFlag, + IN VOID* Value + ) +{ + OpFlag = OpFlag & 0x7f; + + if ( (UINT16)Address < 0xff ) { + //Normal Config Access + UINT32 AddrCf8; + AddrCf8 = (1 << 31) + ((Address >> 8) & 0x0FFFF00) + (Address & 0xFC); + WriteIO (0xCf8, AccWidthUint32, &AddrCf8); + ReadIO ((UINT16) (0xCfC + (Address & 0x3)), OpFlag, Value); + } +} + +VOID +WritePCI ( + IN UINT32 Address, + IN UINT8 OpFlag, + IN VOID* Value + ) +{ + OpFlag = OpFlag & 0x7f; + if ( (UINT16)Address < 0xff ) { + //Normal Config Access + UINT32 AddrCf8; + AddrCf8 = (1 << 31) + ((Address >> 8)&0x0FFFF00) + (Address & 0xFC); + WriteIO (0xCf8, AccWidthUint32, &AddrCf8); + WriteIO ((UINT16) (0xCfC + (Address & 0x3)), OpFlag, Value); + } +} + +VOID +RWPCI ( + IN UINT32 Address, + IN UINT8 OpFlag, + IN UINT32 Mask, + IN UINT32 Data + ) +{ + UINT32 Result; + Result = 0; + OpFlag = OpFlag & 0x7f; + ReadPCI (Address, OpFlag, &Result); + Result = (Result & Mask) | Data; + WritePCI (Address, OpFlag, &Result); +} + +void +ReadIndexPCI32 ( +UINT32 PciAddress, +UINT32 IndexAddress, +void* Value +) +{ + WritePCI(PciAddress,AccWidthUint32,&IndexAddress); + ReadPCI(PciAddress+4,AccWidthUint32,Value); +} + +void +WriteIndexPCI32 ( +UINT32 PciAddress, +UINT32 IndexAddress, +UINT8 OpFlag, +void* Value +) +{ + + WritePCI(PciAddress,AccWidthUint32 | (OpFlag & 0x80),&IndexAddress); + WritePCI(PciAddress+4,AccWidthUint32 | (OpFlag & 0x80) ,Value); +} + +void +RWIndexPCI32 ( +UINT32 PciAddress, +UINT32 IndexAddress, +UINT8 OpFlag, +UINT32 Mask, +UINT32 Data +) +{ + UINT32 Result; + ReadIndexPCI32(PciAddress,IndexAddress,&Result); + Result = (Result & Mask)| Data; + WriteIndexPCI32(PciAddress,IndexAddress,(OpFlag & 0x80),&Result); + +} + +void +ReadMEM ( +UINT32 Address, +UINT8 OpFlag, +void* Value +) +{ + OpFlag = OpFlag & 0x7f; + switch (OpFlag){ + case AccWidthUint8 : *((UINT8*)Value)=*((UINT8*)Address);break; + case AccWidthUint16: *((UINT16*)Value)=*((UINT16*)Address);break; + case AccWidthUint32: *((UINT32*)Value)=*((UINT32*)Address);break; + } +} + +void +WriteMEM ( +UINT32 Address, +UINT8 OpFlag, +void* Value +) +{ + OpFlag = OpFlag & 0x7f; + switch (OpFlag){ + case AccWidthUint8 : *((UINT8*)Address)=*((UINT8*)Value);break; + case AccWidthUint16: *((UINT16*)Address)=*((UINT16*)Value);break; + case AccWidthUint32: *((UINT32*)Address)=*((UINT32*)Value);break; + } +} + +void +RWMEM ( +UINT32 Address, +UINT8 OpFlag, +UINT32 Mask, +UINT32 Data +) +{ + UINT32 Result; + ReadMEM(Address,OpFlag,&Result); + Result = (Result & Mask)| Data; + WriteMEM(Address,OpFlag,&Result); +} + + +void +RWMSR( +UINT32 Address, +UINT64 Mask, +UINT64 Value +) +{ + MsrWrite(Address,(MsrRead(Address)& Mask)|Value); +} + +UINT32 +IsFamily10() +{ + CPUID_DATA Cpuid; + CpuidRead(0x1,(CPUID_DATA *)&Cpuid); + + return Cpuid.REG_EAX & 0xff00000; +} + + +UINT8 GetNumberOfCpuCores(void) +{ + UINT8 Result=1; + Result=ReadNumberOfCpuCores(); + return Result; +} + + +void +Stall( +UINT32 uSec +) +{ + UINT16 timerAddr; + UINT32 startTime, elapsedTime; + ReadPMIO(SB_PMIO_REG24, AccWidthUint16, &timerAddr); + + if (timerAddr ==0){ + uSec = uSec/2; + while (uSec!=0){ + ReadIO(0x80,AccWidthUint8,(UINT8 *)(&startTime)); + uSec--; + } + } + else{ + ReadIO(timerAddr, AccWidthUint32,&startTime); + while (1){ + ReadIO(timerAddr, AccWidthUint32,&elapsedTime); + if (elapsedTime < startTime) + elapsedTime = elapsedTime+0xFFFFFFFF-startTime; + else + elapsedTime = elapsedTime-startTime; + if ((elapsedTime*28/100)>uSec) + break; + } + } +} + + +void +Reset( +) +{ + RWIO(0xcf9,AccWidthUint8,0x0,0x06); +} + + +CIM_STATUS +RWSMBUSBlock( +UINT8 Controller, +UINT8 Address, +UINT8 Offset, +UINT8 BufferSize, +UINT8* BufferPrt +) +{ + UINT16 SmbusPort; + UINT8 i; + UINT8 Status; + ReadPCI(PCI_ADDRESS(0,0x14,0,Controller?0x58:0x10),AccWidthUint16,&SmbusPort); + SmbusPort &= 0xfffe; + RWIO(SmbusPort + 0,AccWidthUint8,0x0,0xff); + RWIO(SmbusPort + 4,AccWidthUint8,0x0,Address); + RWIO(SmbusPort + 3,AccWidthUint8,0x0,Offset); + RWIO(SmbusPort + 2,AccWidthUint8,0x0,0x14); + RWIO(SmbusPort + 5,AccWidthUint8,0x0,BufferSize); + if(!(Address & 0x1)){ + for (i = 0 ;i < BufferSize;i++){ + WriteIO(SmbusPort + 7,AccWidthUint8,&BufferPrt[i]); + } + } + RWIO(SmbusPort + 2,AccWidthUint8,0x0,0x54); + do{ + ReadIO(SmbusPort + 0,AccWidthUint8,&Status); + if (Status & 0x1C) return CIM_ERROR; + if (Status & 0x02) break; + }while(!(Status & 0x1)); + + do{ + ReadIO(SmbusPort + 0,AccWidthUint8,&Status); + }while(Status & 0x1); + + if(Address & 0x1){ + for (i = 0 ;i < BufferSize;i++){ + ReadIO(SmbusPort + 7,AccWidthUint8,&BufferPrt[i]); + } + } + return CIM_SUCCESS; +} + + + +void outPort80(UINT32 pcode) +{ + WriteIO(0x80, AccWidthUint8, &pcode); + return; +} + + +UINT8 +GetByteSum( + void* pData, + UINT32 Length +) +{ + UINT32 i; + UINT8 Checksum = 0; + for (i = 0;i < Length;i++){ + Checksum += *((UINT8*)pData+i); + } + return Checksum; +} + + +UINT32 +readAlink( + UINT32 Index +){ + UINT32 Data; + WriteIO(ALINK_ACCESS_INDEX, AccWidthUint32, &Index); + ReadIO(ALINK_ACCESS_DATA, AccWidthUint32, &Data); + //Clear Index + Index=0; + WriteIO(ALINK_ACCESS_INDEX, AccWidthUint32, &Index); + return Data; +} + + +void +writeAlink( + UINT32 Index, + UINT32 Data +){ + WriteIO(ALINK_ACCESS_INDEX, AccWidthUint32, &Index); + WriteIO(ALINK_ACCESS_DATA, AccWidthUint32, &Data); + //Clear Index + Index=0; + WriteIO(ALINK_ACCESS_INDEX, AccWidthUint32, &Index); + +} + + +/** + * + * IsServer - Determine if southbridge type is SP5100 (server) or SB7x0 (non-server) + * + * A SP5100 is determined when both following two items are true: + * 1) Revision >= A14; + * 2) A server north bridge chipset is detected; + * + * A list of server north bridge chipset: + * + * Family DeviceID + * ---------------------- + * SR5690 0x5A10 + * SR5670 0x5A12 + * SR5650 0x5A13 + * + */ +UINT8 +IsServer (void){ + UINT16 DevID; + + if (getRevisionID () < SB700_A14) { + return 0; + } + ReadPCI ((NB_BDF << 16) + 2, AccWidthUint16, &DevID); + return ((DevID == 0x5a10) || (DevID == 0x5a12) || (DevID == 0x5a13))? 1: 0; +} + +/** + * + * IsLS2Mode - Determine if LS2 mode is enabled or not in northbridge. + * + */ +UINT8 +IsLs2Mode (void) +{ + UINT32 HT3LinkTraining0; + + ReadPCI ((NB_BDF << 16) + 0xAC, AccWidthUint32, &HT3LinkTraining0); + return ( HT3LinkTraining0 & 0x100 )? 1: 0; +} diff --git a/src/vendorcode/amd/cimx/sb700/AmdSbLib.c b/src/vendorcode/amd/cimx/sb700/AmdSbLib.c new file mode 100644 index 0000000..bf4f06a --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/AmdSbLib.c @@ -0,0 +1,276 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + + +void +ReadPMIO ( +UINT8 Address, +UINT8 OpFlag, +void* Value +) +{ + UINT8 i; + + OpFlag = OpFlag & 0x7f; + if (OpFlag == 0x02) OpFlag = 0x03; + for (i=0;i<=OpFlag;i++){ + WriteIO(0xCD6, AccWidthUint8, &Address); // SB_IOMAP_REGCD6 + Address++; + ReadIO(0xCD7, AccWidthUint8, (UINT8 *)Value+i); // SB_IOMAP_REGCD7 + } +} + + +void +WritePMIO ( +UINT8 Address, +UINT8 OpFlag, +void* Value +) +{ + UINT8 i; + + OpFlag = OpFlag & 0x7f; + if (OpFlag == 0x02) OpFlag = 0x03; + for (i=0;i<=OpFlag;i++){ + WriteIO(0xCD6, AccWidthUint8, &Address); // SB_IOMAP_REGCD6 + Address++; + WriteIO(0xCD7, AccWidthUint8, (UINT8 *)Value+i); // SB_IOMAP_REGCD7 + } +} + + +void +RWPMIO ( +UINT8 Address, +UINT8 OpFlag, +UINT32 AndMask, +UINT32 OrMask +) +{ + UINT32 Result; + + OpFlag = OpFlag & 0x7f; + ReadPMIO(Address,OpFlag,&Result); + Result = (Result & AndMask)| OrMask; + WritePMIO(Address,OpFlag,&Result); +} + + +void +ReadPMIO2 ( +UINT8 Address, +UINT8 OpFlag, +void* Value +) +{ + UINT8 i; + + OpFlag = OpFlag & 0x7f; + if (OpFlag == 0x02) OpFlag = 0x03; + for (i=0;i<=OpFlag;i++){ + WriteIO(0xCD0, AccWidthUint8, &Address); // SB_IOMAP_REGCD0 + Address++; + ReadIO(0xCD1, AccWidthUint8, (UINT8 *)Value+i); // SB_IOMAP_REGCD1 + } +} + + +void +WritePMIO2 ( +UINT8 Address, +UINT8 OpFlag, +void* Value +) +{ + UINT8 i; + + OpFlag = OpFlag & 0x7f; + if (OpFlag == 0x02) OpFlag = 0x03; + for (i=0;i<=OpFlag;i++){ + WriteIO(0xCD0, AccWidthUint8, &Address); // SB_IOMAP_REGCD0 + Address++; + WriteIO(0xCD1, AccWidthUint8, (UINT8 *)Value+i); // SB_IOMAP_REGCD1 + } +} + + +void +RWPMIO2 ( +UINT8 Address, +UINT8 OpFlag, +UINT32 AndMask, +UINT32 OrMask +) +{ + UINT32 Result; + + OpFlag = OpFlag & 0x7f; + ReadPMIO2(Address,OpFlag,&Result); + Result = (Result & AndMask)| OrMask; + WritePMIO2(Address,OpFlag,&Result); +} + + +void +EnterEcConfig() +{ + UINT16 dwEcIndexPort; + + ReadPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwEcIndexPort); + dwEcIndexPort &= ~(UINT16)(BIT0); + RWIO(dwEcIndexPort, AccWidthUint8, 0x00, 0x5A); +} + +void +ExitEcConfig() +{ + UINT16 dwEcIndexPort; + + ReadPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwEcIndexPort); + dwEcIndexPort &= ~(UINT16)(BIT0); + RWIO(dwEcIndexPort, AccWidthUint8, 0x00, 0xA5); +} + + +void +ReadEC8 ( +UINT8 Address, +UINT8* Value +) +{ + UINT16 dwEcIndexPort; + + ReadPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwEcIndexPort); + dwEcIndexPort &= ~(UINT16)(BIT0); + WriteIO(dwEcIndexPort, AccWidthUint8, &Address); // SB_IOMAP_REGCD6 + ReadIO(dwEcIndexPort+1, AccWidthUint8, Value); // SB_IOMAP_REGCD7 +} + + +void +WriteEC8 ( +UINT8 Address, +UINT8* Value +) +{ + UINT16 dwEcIndexPort; + + ReadPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwEcIndexPort); + dwEcIndexPort &= ~(UINT16)(BIT0); + WriteIO(dwEcIndexPort, AccWidthUint8, &Address); // SB_IOMAP_REGCD6 + WriteIO(dwEcIndexPort+1, AccWidthUint8, Value); // SB_IOMAP_REGCD7 +} + + +void +RWEC8 ( +UINT8 Address, +UINT8 AndMask, +UINT8 OrMask +) +{ + UINT8 Result; + ReadEC8(Address,&Result); + Result = (Result & AndMask)| OrMask; + WriteEC8(Address, &Result); +} + + +void +programPciByteTable ( +REG8MASK* pPciByteTable, +UINT16 dwTableSize +) +{ + UINT8 i, dbBusNo, dbDevFnNo; + UINT32 ddBDFR; + + dbBusNo = pPciByteTable->bRegIndex; + dbDevFnNo = pPciByteTable->bANDMask; + pPciByteTable++; + for (i = 1; i < dwTableSize; i++){ + if ( (pPciByteTable->bRegIndex==0xFF) && (pPciByteTable->bANDMask==0xFF) && (pPciByteTable->bORMask==0xFF) ){ + pPciByteTable++; + dbBusNo = pPciByteTable->bRegIndex; + dbDevFnNo = pPciByteTable->bANDMask; + } + else{ + ddBDFR = (dbBusNo << 24) + (dbDevFnNo << 16) + (pPciByteTable->bRegIndex) ; + TRACE((DMSG_SB_TRACE, "PFA=%X AND=%X, OR=%X\n", ddBDFR, pPciByteTable->bANDMask, pPciByteTable->bORMask)); + RWPCI(ddBDFR, AccWidthUint8 | S3_SAVE, pPciByteTable->bANDMask, pPciByteTable->bORMask); + pPciByteTable++; + } + } +} + + +void +programPmioByteTable ( +REG8MASK* pPmioByteTable, +UINT16 dwTableSize +) +{ + UINT8 i; + for (i = 0; i < dwTableSize; i++){ + TRACE((DMSG_SB_TRACE, "PMIO Reg = %X AndMask = %X OrMask = %X\n",pPmioByteTable->bRegIndex,pPmioByteTable->bANDMask, pPmioByteTable->bORMask)); + RWPMIO(pPmioByteTable->bRegIndex, AccWidthUint8 , pPmioByteTable->bANDMask, pPmioByteTable->bORMask); + pPmioByteTable++; + } +} + + +UINT8 +getClockMode ( +void +) +{ + UINT8 dbTemp=0; + + RWPMIO(SB_PMIO_REGB2, AccWidthUint8, 0xFF, BIT7); + ReadPMIO(SB_PMIO_REGB0, AccWidthUint8, &dbTemp); + return(dbTemp&BIT4); +} + + +UINT16 +readStrapStatus ( +void +) +{ + UINT16 dwTemp=0; + + RWPMIO(SB_PMIO_REGB2, AccWidthUint8, 0xFF, BIT7); + ReadPMIO(SB_PMIO_REGB0, AccWidthUint16, &dwTemp); + return(dwTemp); +} diff --git a/src/vendorcode/amd/cimx/sb700/Azalia.c b/src/vendorcode/amd/cimx/sb700/Azalia.c new file mode 100644 index 0000000..cc72858 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/Azalia.c @@ -0,0 +1,304 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + + +#include "Platform.h" + +void configureAzaliaPinCmd (AMDSBCFG* pConfig, UINT32 ddBAR0, UINT8 dbChannelNum); +void configureAzaliaSetConfigD4Dword(CODECENTRY* tempAzaliaCodecEntryPtr, UINT32 ddChannelNum, UINT32 ddBAR0); + +//Pin Config for ALC880, ALC882 and ALC883: +CODECENTRY AzaliaCodecAlc882Table[] = { + {0x14, 0x01014010}, + {0x15, 0x01011012}, + {0x16, 0x01016011}, + {0x17, 0x01012014}, + {0x18, 0x01A19030}, + {0x19, 0x411111F0}, + {0x1a, 0x01813080}, + {0x1b, 0x411111F0}, + {0x1C, 0x411111F0}, + {0x1d, 0x411111F0}, + {0x1e, 0x01441150}, + {0x1f, 0x01C46160}, + {0xff, 0xffffffff} +}; + + +//Pin Config for ALC262 +CODECENTRY AzaliaCodecAlc262Table[] = { + {0x14, 0x01014010}, + {0x15, 0x411111F0}, + {0x16, 0x411111F0}, +// {0x17, 0x01012014}, + {0x18, 0x01A19830}, + {0x19, 0x02A19C40}, + {0x1a, 0x01813031}, + {0x1b, 0x02014C20}, + {0x1c, 0x411111F0}, + {0x1d, 0x411111F0}, + {0x1e, 0x0144111E}, + {0x1f, 0x01C46150}, + {0xff, 0xffffffff} +}; + +//Pin Config for ALC0861: +CODECENTRY AzaliaCodecAlc861Table[] = { + {0x01, 0x8086C601}, + {0x0B, 0x01014110}, + {0x0C, 0x01813140}, + {0x0D, 0x01A19941}, + {0x0E, 0x411111F0}, + {0x0F, 0x02214420}, + {0x10, 0x02A1994E}, + {0x11, 0x99330142}, + {0x12, 0x01451130}, + {0x1F, 0x411111F0}, + {0x20, 0x411111F0}, + {0x23, 0x411111F0}, + {0xff, 0xffffffff} +}; + +//Pin Config for ADI1984: +CODECENTRY AzaliaCodecAd1984Table[] = { + {0x11, 0x0221401F}, + {0x12, 0x90170110}, + {0x13, 0x511301F0}, + {0x14, 0x02A15020}, + {0x15, 0x50A301F0}, + {0x16, 0x593301F0}, + {0x17, 0x55A601F0}, + {0x18, 0x55A601F0}, + {0x1A, 0x91F311F0}, + {0x1B, 0x014511A0}, + {0x1C, 0x599301F0}, + {0xff, 0xffffffff} +}; + + +CODECENTRY FrontPanelAzaliaCodecTableList[] = { + {0x19, 0x02A19040}, + {0x1b, 0x02214020}, + {0xff, 0xffffffff} +}; + + +CODECTBLLIST azaliaCodecTableList[] = { + {0x010ec0880, &AzaliaCodecAlc882Table[0]}, + {0x010ec0882, &AzaliaCodecAlc882Table[0]}, + {0x010ec0883, &AzaliaCodecAlc882Table[0]}, + {0x010ec0885, &AzaliaCodecAlc882Table[0]}, + {0x010ec0262, &AzaliaCodecAlc262Table[0]}, + {0x010ec0861, &AzaliaCodecAlc861Table[0]}, + {0x011d41984, &AzaliaCodecAd1984Table[0]}, + {(UINT32)0x0FFFFFFFF, (CODECENTRY*)0xFFFFFFFF} +}; + + +/*------------------------------------------------------------------------------- +; Procedure: azaliaInitAfterPciEnum +; +; Description: This routine detects Azalia and, if present, initializes Azalia +; This routine is called from atiSbAfterPciInit +; +; +; Exit: None +; +; Modified: None +; +;----------------------------------------------------------------------------- +*/ +void azaliaInitAfterPciEnum (AMDSBCFG* pConfig){ + UINT8 i, dbEnableAzalia=0, dbPinRouting, dbChannelNum=0, dbTempVariable = 0; + UINT16 dwTempVariable = 0; + UINT32 ddBAR0, ddTempVariable = 0; + + if (pConfig->AzaliaController == 1) return; + + if (pConfig->AzaliaController != 1){ + RWPCI((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG04, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT1, BIT1); + ReadPCI((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG10, AccWidthUint32, &ddBAR0); + + if (ddBAR0 != 0){ //Keep the flag as disabled if BAR is 0 or all "F"s. + if (ddBAR0 != 0xFFFFFFFF){ + ddBAR0 &= ~(0x03FFF); + dbEnableAzalia = 1; + TRACE((DMSG_SB_TRACE, "CIMxSB - Enabling Azalia controller (BAR setup is ok) \n")); + } + } + } + + if (dbEnableAzalia){ //if Azalia is enabled + //Get SDIN Configuration + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGF8, AccWidthUint32 | S3_SAVE, 0, ddTempVariable); + ddTempVariable |= (pConfig->AzaliaSdin3 << 6); + ddTempVariable |= (pConfig->AzaliaSdin2 << 4); + ddTempVariable |= (pConfig->AzaliaSdin1 << 2); + ddTempVariable |= pConfig->AzaliaSdin0; + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGFC, AccWidthUint8 | S3_SAVE, 0, (ddTempVariable & 0xFF)); + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG60+3, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT2+BIT1+BIT0), 0); + + i=11; + do{ + ReadMEM( ddBAR0+SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); + dbTempVariable |= BIT0; + WriteMEM(ddBAR0+SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); + Stall(1000); + ReadMEM(ddBAR0+SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); + i--; + } while ( (!(dbTempVariable & BIT0)) && (i > 0) ); + + if (i==0){ + TRACE((DMSG_SB_TRACE, "CIMxSB - Problem in resetting Azalia controller\n")); + return; + } + + Stall(1000); + ReadMEM( ddBAR0+SB_AZ_BAR_REG0E, AccWidthUint16, &dwTempVariable); + if (dwTempVariable & 0x0F){ + TRACE((DMSG_SB_TRACE, "CIMxSB - Atleast One Azalia CODEC found \n")); + //atleast one azalia codec found + ReadPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGFC, AccWidthUint8, &dbPinRouting); + do{ + if ( ( !(dbPinRouting & BIT0) ) && (dbPinRouting & BIT1) ) + configureAzaliaPinCmd(pConfig, ddBAR0, dbChannelNum); + dbPinRouting >>= 2; + dbChannelNum++; + } while (dbChannelNum != 4); + } + else{ + TRACE((DMSG_SB_TRACE, "CIMxSB - Azalia CODEC NOT found \n")); + //No Azalia codec found + if (pConfig->AzaliaController != 2) + dbEnableAzalia = 0; //set flag to disable Azalia + } + } + + if (dbEnableAzalia){ + //redo clear reset + do{ + dwTempVariable = 0; + WriteMEM( ddBAR0+SB_AZ_BAR_REG0C, AccWidthUint16 | S3_SAVE, &dwTempVariable); + ReadMEM(ddBAR0+SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); + dbTempVariable &= ~(UINT8)(BIT0); + WriteMEM(ddBAR0+SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); + ReadMEM(ddBAR0+SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); + } while (dbTempVariable & BIT0); + + if (pConfig->AzaliaSnoop == 1) + RWPCI((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG42, AccWidthUint8 | S3_SAVE, 0xFF, BIT1+BIT0); + } + else{ + //disable Azalia controller + RWPCI((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG04, AccWidthUint16 | S3_SAVE, 0, 0); + RWPMIO(SB_PMIO_REG59, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT3, 0); + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGFC, AccWidthUint8 | S3_SAVE, 0, 0x55); + } +} + + +void configureAzaliaPinCmd (AMDSBCFG* pConfig, UINT32 ddBAR0, UINT8 dbChannelNum){ + UINT32 ddTempVariable, ddChannelNum; + CODECTBLLIST* ptempAzaliaOemCodecTablePtr; + CODECENTRY* tempAzaliaCodecEntryPtr; + + if ((pConfig->AzaliaPinCfg) != 1) + return; + + ddChannelNum = dbChannelNum << 28; + ddTempVariable = 0xF0000; + ddTempVariable |= ddChannelNum; + WriteMEM(ddBAR0 + SB_AZ_BAR_REG60, AccWidthUint32 | S3_SAVE, &ddTempVariable); + Stall(60); + ReadMEM(ddBAR0 + SB_AZ_BAR_REG64, AccWidthUint32 | S3_SAVE, &ddTempVariable); + + if ( ((pConfig->pAzaliaOemCodecTablePtr) == NULL) || ((pConfig->pAzaliaOemCodecTablePtr) == ((CODECTBLLIST*) 0xFFFFFFFF)) ) + ptempAzaliaOemCodecTablePtr = (CODECTBLLIST*) FIXUP_PTR(&azaliaCodecTableList[0]); + else + ptempAzaliaOemCodecTablePtr = (CODECTBLLIST*) pConfig->pAzaliaOemCodecTablePtr; + + TRACE((DMSG_SB_TRACE, "CIMxSB - Azalia CODEC table pointer is %x \n", (UINT32)ptempAzaliaOemCodecTablePtr)); + + while ( ptempAzaliaOemCodecTablePtr->CodecID != 0xFFFFFFFF){ + if ( ptempAzaliaOemCodecTablePtr->CodecID == ddTempVariable) + break; + else + ++ptempAzaliaOemCodecTablePtr; + } + + if ( ptempAzaliaOemCodecTablePtr->CodecID != 0xFFFFFFFF){ + TRACE((DMSG_SB_TRACE, "CIMxSB - Matching CODEC ID found \n")); + tempAzaliaCodecEntryPtr = (CODECENTRY*) ptempAzaliaOemCodecTablePtr->CodecTablePtr; + TRACE((DMSG_SB_TRACE, "CIMxSB - Matching Azalia CODEC table pointer is %x \n", (UINT32)tempAzaliaCodecEntryPtr)); + + if ( ((pConfig->pAzaliaOemCodecTablePtr) == NULL) || ((pConfig->pAzaliaOemCodecTablePtr) == ((CODECTBLLIST*) 0xFFFFFFFF)) ) + tempAzaliaCodecEntryPtr = (CODECENTRY*) FIXUP_PTR(tempAzaliaCodecEntryPtr); + + configureAzaliaSetConfigD4Dword(tempAzaliaCodecEntryPtr, ddChannelNum, ddBAR0); + if (pConfig->AzaliaFrontPanel != 1){ + if ( (pConfig->AzaliaFrontPanel == 2) || (pConfig->FrontPanelDetected == 1) ){ + if ( ((pConfig->pAzaliaOemFpCodecTableptr) == NULL) || ((pConfig->pAzaliaOemFpCodecTableptr) == 0xFFFFFFFF)) + tempAzaliaCodecEntryPtr = (CODECENTRY*) FIXUP_PTR(&FrontPanelAzaliaCodecTableList[0]); + else + tempAzaliaCodecEntryPtr = (CODECENTRY*) pConfig->pAzaliaOemFpCodecTableptr; + configureAzaliaSetConfigD4Dword(tempAzaliaCodecEntryPtr, ddChannelNum, ddBAR0); + } + } + } +} + + +void configureAzaliaSetConfigD4Dword(CODECENTRY* tempAzaliaCodecEntryPtr, UINT32 ddChannelNum, UINT32 ddBAR0){ + UINT8 dbtemp1,dbtemp2, i; + UINT32 ddtemp=0,ddtemp2=0; + + while ((tempAzaliaCodecEntryPtr->Nid) != 0xFF){ + dbtemp1=0x20; + if ((tempAzaliaCodecEntryPtr->Nid) == 0x1) + dbtemp1=0x24; + ddtemp = tempAzaliaCodecEntryPtr->Nid; + ddtemp &= 0xff; + ddtemp <<= 20; + ddtemp |= ddChannelNum; + ddtemp |= (0x700 << 8); + for(i=4; i>0; i--){ + do{ + ReadMEM(ddBAR0 + SB_AZ_BAR_REG68, AccWidthUint32, &ddtemp2); + } while (ddtemp2 & BIT0); + dbtemp2 = ( (tempAzaliaCodecEntryPtr->Byte40) >> ((4-i) * 8 ) ) & 0xff; + ddtemp = (ddtemp & 0xFFFF0000)+ ((dbtemp1 - i) << 8) + dbtemp2; + WriteMEM(ddBAR0 + SB_AZ_BAR_REG60, AccWidthUint32 | S3_SAVE, &ddtemp); + Stall(60); + } + ++tempAzaliaCodecEntryPtr; + } +} + diff --git a/src/vendorcode/amd/cimx/sb700/DEBUG.c b/src/vendorcode/amd/cimx/sb700/DEBUG.c deleted file mode 100644 index f40682e..0000000 --- a/src/vendorcode/amd/cimx/sb700/DEBUG.c +++ /dev/null @@ -1,169 +0,0 @@ -/***************************************************************************** - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - ***************************************************************************/ - - -#include "Platform.h" - -#define COM_BASE_ADDRESS 0x3f8 -#define DIVISOR 115200 -#define LF 0x0a -#define CR 0x0d - - -#ifdef CIM_DEBUG - #ifndef CIM_DEBUG_LEVEL - #define CIM_DEBUG_LEVEL 0xf -#endif - -void -TraceCode( UINT32 Level, UINT32 Code){ - - if (!(Level & CIM_DEBUG_LEVEL)){ - return; - } -#if CIM_DEBUG & 1 - if (Code != 0xFF){ - WriteIO(0x80,AccWidthUint8,&Code); - } -#endif - -} - - -void -TraceDebug( UINT32 Level, CHAR8 *Format, ...){ - CHAR8 temp[16]; - va_list ArgList; - - if (!(Level & CIM_DEBUG_LEVEL)){ - return; - } - -#if CIM_DEBUG & 2 - ArgList = va_start(ArgList,Format); - Format= (CHAR8*) FIXUP_PTR(Format); - while (1){ - if (*Format == 0) break; - if (*Format == '%'){ - int Radix = 0; - if(*(Format+1)=='s'||*(Format+1)=='S'){ - SendStringPort((CHAR8*) FIXUP_PTR(va_arg(ArgList,CHAR8*))); - Format+=2; - continue; - } - - if(*(Format+1)=='d'||*(Format+1)=='D'){ - Radix = 10; - } - if(*(Format+1)=='x'||*(Format+1)=='X'){ - Radix = 16; - } - if (Radix){ - ItoA(va_arg(ArgList,int),Radix,temp); - SendStringPort(temp); - Format+=2; - continue; - } - } - SendBytePort(*Format); - if(*(Format)==0x0a) SendBytePort(0x0d); - Format++; - } - va_end(ArgList); -#endif -} - - -void -ItoA( UINT32 Value, int Radix, char* pstr) -{ - char* tsptr = pstr; - char* rsptr = pstr; - char ch1,ch2; - unsigned int Reminder; -//Create String - do{ - Reminder = Value%Radix; - Value = Value/Radix; - if (Reminder<0xa) *tsptr=Reminder+'0'; - else *tsptr=Reminder-0xa+'a'; - tsptr++; - } while(Value); -//Reverse String - *tsptr = 0; - tsptr--; - while(tsptr>rsptr){ - ch1 = *tsptr; - ch2 = *rsptr; - *rsptr = ch1; - *tsptr = ch2; - tsptr--; - rsptr++; - } -} - -void -InitSerialOut(){ - UINT8 Data; - UINT16 Divisor; - Data = 0x87; - WriteIO(COM_BASE_ADDRESS + 0x3,AccWidthUint8, &Data); - Divisor = 115200 / DIVISOR; - Data = Divisor & 0xFF; - WriteIO(COM_BASE_ADDRESS + 0x00,AccWidthUint8, &Data); - Data = Divisor >> 8; - WriteIO(COM_BASE_ADDRESS + 0x01,AccWidthUint8, &Data); - Data = 0x07; - WriteIO(COM_BASE_ADDRESS + 0x3,AccWidthUint8, &Data); -} - - -void -SendStringPort(char* pstr){ - - while (*pstr!=0){ - SendBytePort(*pstr); - pstr++; - } -} - -void -SendBytePort(UINT8 Data) -{ - int Count = 80; - UINT8 Status; - do { - ReadIO((COM_BASE_ADDRESS + 0x05),AccWidthUint8, &Status); - if(Status == 0xff) break; - // Loop port is ready - } while ( (Status & 0x20) == 0 && (--Count) != 0); - WriteIO(COM_BASE_ADDRESS + 0x00,AccWidthUint8, &Data); -} -#endif diff --git a/src/vendorcode/amd/cimx/sb700/DISPATCHER.c b/src/vendorcode/amd/cimx/sb700/DISPATCHER.c deleted file mode 100644 index ae5f9b8..0000000 --- a/src/vendorcode/amd/cimx/sb700/DISPATCHER.c +++ /dev/null @@ -1,208 +0,0 @@ -/***************************************************************************** - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - ***************************************************************************/ - - -#include "Platform.h" - -void DispatcherEntry(void *pConfig){ - -#ifdef B1_IMAGE - void *pB2ImagePtr = NULL; - CIM_IMAGE_ENTRY pB2ImageEntry; -#endif - -//#if CIM_DEBUG -// InitSerialOut(); -//#endif - - TRACE((DMSG_SB_TRACE, "CIM - SB700 Entry\n")); - -#ifdef B1_IMAGE - if ((UINT32)(((STDCFG*)pConfig)->pB2ImageBase) != 0xffffffff){ - if (((STDCFG*)pConfig)->pB2ImageBase) - pB2ImagePtr = CheckImage('007S',(void*)((STDCFG*)pConfig)->pB2ImageBase); - if (pB2ImagePtr == NULL) - pB2ImagePtr = LocateImage('007S'); - if (pB2ImagePtr!=NULL){ - TRACE((DMSG_SB_TRACE, "CIM - SB700 Redirect to B2 Image\n")); - ((STDCFG*)pConfig)->pImageBase = (UINT32)pB2ImagePtr; - pB2ImageEntry = (CIM_IMAGE_ENTRY)(*((UINT32*)pB2ImagePtr+1) + (UINT32)pB2ImagePtr); - (*pB2ImageEntry)(pConfig); - return; - } - } -#endif - saveConfigPointer(pConfig); - - if (((STDCFG*)pConfig)->Func == SB_POWERON_INIT) - sbPowerOnInit((AMDSBCFG*)pConfig); - -#ifndef B1_IMAGE - if (((STDCFG*)pConfig)->Func == SB_BEFORE_PCI_INIT) - sbBeforePciInit((AMDSBCFG*)pConfig); - if (((STDCFG*)pConfig)->Func == SB_AFTER_PCI_INIT) - sbAfterPciInit((AMDSBCFG*)pConfig); - if (((STDCFG*)pConfig)->Func == SB_LATE_POST_INIT) - sbLatePost((AMDSBCFG*)pConfig); - if (((STDCFG*)pConfig)->Func == SB_BEFORE_PCI_RESTORE_INIT) - sbBeforePciRestoreInit((AMDSBCFG*)pConfig); - if (((STDCFG*)pConfig)->Func == SB_AFTER_PCI_RESTORE_INIT) - sbAfterPciRestoreInit((AMDSBCFG*)pConfig); - if (((STDCFG*)pConfig)->Func == SB_SMM_SERVICE) - { - // sbSmmService((AMDSBCFG*)pConfig); - } - if (((STDCFG*)pConfig)->Func == SB_SMM_ACPION) - sbSmmAcpiOn((AMDSBCFG*)pConfig); -#endif - TRACE((DMSG_SB_TRACE, "CIMx - SB Exit\n")); -} - - -void* LocateImage(UINT32 Signature){ - void *Result; - UINT8 *ImagePtr = (UINT8*)(0xffffffff - (IMAGE_ALIGN-1)); - while ((UINT32)ImagePtr>=(0xfffffff - (NUM_IMAGE_LOCATION*IMAGE_ALIGN -1))){ - Result = CheckImage(Signature,(void*)ImagePtr); - if (Result != NULL) - return Result; - ImagePtr -= IMAGE_ALIGN; - } - return NULL; -} - - -void* CheckImage(UINT32 Signature, void* ImagePtr){ - UINT8 *TempImagePtr; - UINT8 Sum = 0; - UINT32 i; -// if ((*((UINT32*)ImagePtr) == 'ITA$' && ((CIMFILEHEADER*)ImagePtr)->ModuleLogo == Signature)){ - if ((*((UINT32*)ImagePtr) == Int32FromChar ('$', 'A', 'T', 'I')) && (((CIMFILEHEADER*)ImagePtr)->ModuleLogo == Signature)){ - //GetImage Image size - TempImagePtr = (UINT8*)ImagePtr; - for (i=0;i<(((CIMFILEHEADER*)ImagePtr)->ImageSize);i++){ - Sum += *TempImagePtr; - TempImagePtr++; - } - if (Sum == 0) - return ImagePtr; - } - return NULL; -} - - -UINT32 GetPciebase(){ - AMDSBCFG* Result; - Result = getConfigPointer(); - return Result->StdHeader.pPcieBase; -} - - -void saveConfigPointer(AMDSBCFG* pConfig){ - UINT8 dbReg, i; - UINT32 ddValue; - - ddValue = ((UINT32) pConfig); - dbReg = SB_ECMOS_REG08; - - for (i=0; i<=3; i++){ - WriteIO(SB_IOMAP_REG72, AccWidthUint8, &dbReg); - WriteIO(SB_IOMAP_REG73, AccWidthUint8, (UINT8 *)&ddValue); - ddValue >>= 8; - dbReg++; - } -} - - -AMDSBCFG* getConfigPointer(){ - UINT8 dbReg, dbValue, i; - UINT32 ddValue=0; - - dbReg = SB_ECMOS_REG08; - for (i=0; i<=3; i++){ - WriteIO(SB_IOMAP_REG72, AccWidthUint8, &dbReg); - ReadIO(SB_IOMAP_REG73, AccWidthUint8, &dbValue); - ddValue |= (dbValue<<(i*8)); - dbReg++; - } - return( (AMDSBCFG*) ddValue); -} - -/** - * AmdSbDispatcher - Dispatch Southbridge function - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -AGESA_STATUS -AmdSbDispatcher ( - IN VOID *pConfig - ) -{ - AGESA_STATUS Status = AGESA_SUCCESS; - - saveConfigPointer (pConfig); - - if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_POWERON_INIT ) { - sbPowerOnInit ((AMDSBCFG*) pConfig); - } - - if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_BEFORE_PCI_INIT ) { - sbBeforePciInit ((AMDSBCFG*)pConfig); - } - - if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_AFTER_PCI_INIT ) { - sbAfterPciInit ((AMDSBCFG*)pConfig); - } - - if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_LATE_POST_INIT ) { - sbLatePost ((AMDSBCFG*)pConfig); - } - - if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_BEFORE_PCI_RESTORE_INIT ) { - sbBeforePciRestoreInit ((AMDSBCFG*)pConfig); - } - - if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_AFTER_PCI_RESTORE_INIT ) { - sbAfterPciRestoreInit ((AMDSBCFG*)pConfig); - } - - if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_SMM_SERVICE ) { - sbSmmService ((AMDSBCFG*)pConfig); - } - - if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_SMM_ACPION ) { - sbSmmAcpiOn ((AMDSBCFG*)pConfig); - } - - return Status; -} diff --git a/src/vendorcode/amd/cimx/sb700/Debug.c b/src/vendorcode/amd/cimx/sb700/Debug.c new file mode 100644 index 0000000..f40682e --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/Debug.c @@ -0,0 +1,169 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + +#define COM_BASE_ADDRESS 0x3f8 +#define DIVISOR 115200 +#define LF 0x0a +#define CR 0x0d + + +#ifdef CIM_DEBUG + #ifndef CIM_DEBUG_LEVEL + #define CIM_DEBUG_LEVEL 0xf +#endif + +void +TraceCode( UINT32 Level, UINT32 Code){ + + if (!(Level & CIM_DEBUG_LEVEL)){ + return; + } +#if CIM_DEBUG & 1 + if (Code != 0xFF){ + WriteIO(0x80,AccWidthUint8,&Code); + } +#endif + +} + + +void +TraceDebug( UINT32 Level, CHAR8 *Format, ...){ + CHAR8 temp[16]; + va_list ArgList; + + if (!(Level & CIM_DEBUG_LEVEL)){ + return; + } + +#if CIM_DEBUG & 2 + ArgList = va_start(ArgList,Format); + Format= (CHAR8*) FIXUP_PTR(Format); + while (1){ + if (*Format == 0) break; + if (*Format == '%'){ + int Radix = 0; + if(*(Format+1)=='s'||*(Format+1)=='S'){ + SendStringPort((CHAR8*) FIXUP_PTR(va_arg(ArgList,CHAR8*))); + Format+=2; + continue; + } + + if(*(Format+1)=='d'||*(Format+1)=='D'){ + Radix = 10; + } + if(*(Format+1)=='x'||*(Format+1)=='X'){ + Radix = 16; + } + if (Radix){ + ItoA(va_arg(ArgList,int),Radix,temp); + SendStringPort(temp); + Format+=2; + continue; + } + } + SendBytePort(*Format); + if(*(Format)==0x0a) SendBytePort(0x0d); + Format++; + } + va_end(ArgList); +#endif +} + + +void +ItoA( UINT32 Value, int Radix, char* pstr) +{ + char* tsptr = pstr; + char* rsptr = pstr; + char ch1,ch2; + unsigned int Reminder; +//Create String + do{ + Reminder = Value%Radix; + Value = Value/Radix; + if (Reminder<0xa) *tsptr=Reminder+'0'; + else *tsptr=Reminder-0xa+'a'; + tsptr++; + } while(Value); +//Reverse String + *tsptr = 0; + tsptr--; + while(tsptr>rsptr){ + ch1 = *tsptr; + ch2 = *rsptr; + *rsptr = ch1; + *tsptr = ch2; + tsptr--; + rsptr++; + } +} + +void +InitSerialOut(){ + UINT8 Data; + UINT16 Divisor; + Data = 0x87; + WriteIO(COM_BASE_ADDRESS + 0x3,AccWidthUint8, &Data); + Divisor = 115200 / DIVISOR; + Data = Divisor & 0xFF; + WriteIO(COM_BASE_ADDRESS + 0x00,AccWidthUint8, &Data); + Data = Divisor >> 8; + WriteIO(COM_BASE_ADDRESS + 0x01,AccWidthUint8, &Data); + Data = 0x07; + WriteIO(COM_BASE_ADDRESS + 0x3,AccWidthUint8, &Data); +} + + +void +SendStringPort(char* pstr){ + + while (*pstr!=0){ + SendBytePort(*pstr); + pstr++; + } +} + +void +SendBytePort(UINT8 Data) +{ + int Count = 80; + UINT8 Status; + do { + ReadIO((COM_BASE_ADDRESS + 0x05),AccWidthUint8, &Status); + if(Status == 0xff) break; + // Loop port is ready + } while ( (Status & 0x20) == 0 && (--Count) != 0); + WriteIO(COM_BASE_ADDRESS + 0x00,AccWidthUint8, &Data); +} +#endif diff --git a/src/vendorcode/amd/cimx/sb700/Dispatcher.c b/src/vendorcode/amd/cimx/sb700/Dispatcher.c new file mode 100644 index 0000000..ae5f9b8 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/Dispatcher.c @@ -0,0 +1,208 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + +void DispatcherEntry(void *pConfig){ + +#ifdef B1_IMAGE + void *pB2ImagePtr = NULL; + CIM_IMAGE_ENTRY pB2ImageEntry; +#endif + +//#if CIM_DEBUG +// InitSerialOut(); +//#endif + + TRACE((DMSG_SB_TRACE, "CIM - SB700 Entry\n")); + +#ifdef B1_IMAGE + if ((UINT32)(((STDCFG*)pConfig)->pB2ImageBase) != 0xffffffff){ + if (((STDCFG*)pConfig)->pB2ImageBase) + pB2ImagePtr = CheckImage('007S',(void*)((STDCFG*)pConfig)->pB2ImageBase); + if (pB2ImagePtr == NULL) + pB2ImagePtr = LocateImage('007S'); + if (pB2ImagePtr!=NULL){ + TRACE((DMSG_SB_TRACE, "CIM - SB700 Redirect to B2 Image\n")); + ((STDCFG*)pConfig)->pImageBase = (UINT32)pB2ImagePtr; + pB2ImageEntry = (CIM_IMAGE_ENTRY)(*((UINT32*)pB2ImagePtr+1) + (UINT32)pB2ImagePtr); + (*pB2ImageEntry)(pConfig); + return; + } + } +#endif + saveConfigPointer(pConfig); + + if (((STDCFG*)pConfig)->Func == SB_POWERON_INIT) + sbPowerOnInit((AMDSBCFG*)pConfig); + +#ifndef B1_IMAGE + if (((STDCFG*)pConfig)->Func == SB_BEFORE_PCI_INIT) + sbBeforePciInit((AMDSBCFG*)pConfig); + if (((STDCFG*)pConfig)->Func == SB_AFTER_PCI_INIT) + sbAfterPciInit((AMDSBCFG*)pConfig); + if (((STDCFG*)pConfig)->Func == SB_LATE_POST_INIT) + sbLatePost((AMDSBCFG*)pConfig); + if (((STDCFG*)pConfig)->Func == SB_BEFORE_PCI_RESTORE_INIT) + sbBeforePciRestoreInit((AMDSBCFG*)pConfig); + if (((STDCFG*)pConfig)->Func == SB_AFTER_PCI_RESTORE_INIT) + sbAfterPciRestoreInit((AMDSBCFG*)pConfig); + if (((STDCFG*)pConfig)->Func == SB_SMM_SERVICE) + { + // sbSmmService((AMDSBCFG*)pConfig); + } + if (((STDCFG*)pConfig)->Func == SB_SMM_ACPION) + sbSmmAcpiOn((AMDSBCFG*)pConfig); +#endif + TRACE((DMSG_SB_TRACE, "CIMx - SB Exit\n")); +} + + +void* LocateImage(UINT32 Signature){ + void *Result; + UINT8 *ImagePtr = (UINT8*)(0xffffffff - (IMAGE_ALIGN-1)); + while ((UINT32)ImagePtr>=(0xfffffff - (NUM_IMAGE_LOCATION*IMAGE_ALIGN -1))){ + Result = CheckImage(Signature,(void*)ImagePtr); + if (Result != NULL) + return Result; + ImagePtr -= IMAGE_ALIGN; + } + return NULL; +} + + +void* CheckImage(UINT32 Signature, void* ImagePtr){ + UINT8 *TempImagePtr; + UINT8 Sum = 0; + UINT32 i; +// if ((*((UINT32*)ImagePtr) == 'ITA$' && ((CIMFILEHEADER*)ImagePtr)->ModuleLogo == Signature)){ + if ((*((UINT32*)ImagePtr) == Int32FromChar ('$', 'A', 'T', 'I')) && (((CIMFILEHEADER*)ImagePtr)->ModuleLogo == Signature)){ + //GetImage Image size + TempImagePtr = (UINT8*)ImagePtr; + for (i=0;i<(((CIMFILEHEADER*)ImagePtr)->ImageSize);i++){ + Sum += *TempImagePtr; + TempImagePtr++; + } + if (Sum == 0) + return ImagePtr; + } + return NULL; +} + + +UINT32 GetPciebase(){ + AMDSBCFG* Result; + Result = getConfigPointer(); + return Result->StdHeader.pPcieBase; +} + + +void saveConfigPointer(AMDSBCFG* pConfig){ + UINT8 dbReg, i; + UINT32 ddValue; + + ddValue = ((UINT32) pConfig); + dbReg = SB_ECMOS_REG08; + + for (i=0; i<=3; i++){ + WriteIO(SB_IOMAP_REG72, AccWidthUint8, &dbReg); + WriteIO(SB_IOMAP_REG73, AccWidthUint8, (UINT8 *)&ddValue); + ddValue >>= 8; + dbReg++; + } +} + + +AMDSBCFG* getConfigPointer(){ + UINT8 dbReg, dbValue, i; + UINT32 ddValue=0; + + dbReg = SB_ECMOS_REG08; + for (i=0; i<=3; i++){ + WriteIO(SB_IOMAP_REG72, AccWidthUint8, &dbReg); + ReadIO(SB_IOMAP_REG73, AccWidthUint8, &dbValue); + ddValue |= (dbValue<<(i*8)); + dbReg++; + } + return( (AMDSBCFG*) ddValue); +} + +/** + * AmdSbDispatcher - Dispatch Southbridge function + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +AGESA_STATUS +AmdSbDispatcher ( + IN VOID *pConfig + ) +{ + AGESA_STATUS Status = AGESA_SUCCESS; + + saveConfigPointer (pConfig); + + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_POWERON_INIT ) { + sbPowerOnInit ((AMDSBCFG*) pConfig); + } + + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_BEFORE_PCI_INIT ) { + sbBeforePciInit ((AMDSBCFG*)pConfig); + } + + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_AFTER_PCI_INIT ) { + sbAfterPciInit ((AMDSBCFG*)pConfig); + } + + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_LATE_POST_INIT ) { + sbLatePost ((AMDSBCFG*)pConfig); + } + + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_BEFORE_PCI_RESTORE_INIT ) { + sbBeforePciRestoreInit ((AMDSBCFG*)pConfig); + } + + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_AFTER_PCI_RESTORE_INIT ) { + sbAfterPciRestoreInit ((AMDSBCFG*)pConfig); + } + + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_SMM_SERVICE ) { + sbSmmService ((AMDSBCFG*)pConfig); + } + + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_SMM_ACPION ) { + sbSmmAcpiOn ((AMDSBCFG*)pConfig); + } + + return Status; +} diff --git a/src/vendorcode/amd/cimx/sb700/EC.c b/src/vendorcode/amd/cimx/sb700/EC.c deleted file mode 100644 index 3ad15e1..0000000 --- a/src/vendorcode/amd/cimx/sb700/EC.c +++ /dev/null @@ -1,132 +0,0 @@ -/***************************************************************************** - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - ***************************************************************************/ - - -#include "Platform.h" - -#ifndef NO_EC_SUPPORT - -REG8MASK sb710PorInitPciTable[] = { - // SMBUS Device(Bus 0, Dev 20, Func 0) - {0x00, SMBUS_BUS_DEV_FUN, 0}, - {SB_SMBUS_REG43, ~(UINT8)BIT3, 0x00}, //Make some hidden registers of smbus visible. - {SB_SMBUS_REG38, (UINT8)~(BIT7+BIT5+BIT4+BIT3+BIT2+BIT1), 0x0D}, - {SB_SMBUS_REG38+1, ~(UINT8)(BIT2+BIT1), BIT3 }, - {SB_SMBUS_REGE1, 0xFF, BIT1}, - {SB_SMBUS_REG43, 0xFF, BIT3}, //Make some hidden registers of smbus invisible. - {0xFF, 0xFF, 0xFF}, - - // LPC Device(Bus 0, Dev 20, Func 3) - {0x00, LPC_BUS_DEV_FUN, 0}, - {SB_LPC_REGB8+3, ~(UINT8)(BIT1), BIT7+BIT2}, - {0xFF, 0xFF, 0xFF}, -}; - -REG8MASK sb710PorPmioInitTbl[]={ - // index andmask ormask - {SB_PMIO_REGD7, 0xFF, BIT5}, - {SB_PMIO_REGBB, 0xFF, BIT5}, -}; - - -void ecPowerOnInit(BUILDPARAM *pBuildOptPtr, AMDSBCFG* pConfig){ - UINT8 dbVar0, i=0; - - if (!(isEcPresent())) - return; //return if EC is not enabled - - for(i=0;i<0xFF;i++){ - ReadPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG40, AccWidthUint8 | S3_SAVE, &dbVar0); - if ( dbVar0 & BIT7 ) break; //break if EC is ready - Stall(500); //wait for EC to become ready - } - - if (getRevisionID() >= SB700_A14){ - programPciByteTable( (REG8MASK*)FIXUP_PTR(&sb710PorInitPciTable[0]), sizeof(sb710PorInitPciTable)/sizeof(REG8MASK) ); - programPmioByteTable( (REG8MASK *)FIXUP_PTR(&sb710PorPmioInitTbl[0]), (sizeof(sb710PorPmioInitTbl)/sizeof(REG8MASK)) ); - } - - RWPCI(((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGBA), AccWidthUint8 | S3_SAVE, 0xFF, BIT2); //Enable SPI Prefetch in EC - - //Enable config mode - EnterEcConfig(); - - //Do settings for mailbox - logical device 0x09 - RWEC8(0x07, 0x00, 0x09); //switch to device 9 (Mailbox) - RWEC8(0x60, 0x00, (pBuildOptPtr->EcLdn9MailBoxAddr >> 8)); //set MSB of Mailbox port - RWEC8(0x61, 0x00, (pBuildOptPtr->EcLdn9MailBoxAddr & 0xFF)); //set LSB of Mailbox port - RWEC8(0x30, 0x00, 0x01); //;Enable Mailbox Registers Interface, bit0=1 - - if (pBuildOptPtr->EcKbd == CIMX_OPTION_ENABLED){ - RWPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG60+3), AccWidthUint8 | S3_SAVE, 0xFF, BIT7+BIT3); - //Enable KBRST#, IRQ1 & IRQ12, GateA20 Function signal from IMC - RWPMIO(SB_PMIO_REGBB, AccWidthUint8, 0xFF, BIT3+BIT2+BIT1+BIT0); - //Disable LPC Decoding of port 60/64 - RWPCI(((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG47), AccWidthUint8 | S3_SAVE, ~(UINT32)BIT5, 0); - //Enable logical device 0x07 (Keyboard controller) - RWEC8(0x07, 0x00, 0x07); - RWEC8(0x30, 0x00, 0x01); - } - - if (pBuildOptPtr->EcChannel0 == CIMX_OPTION_ENABLED){ - //Logical device 0x08 - RWEC8(0x07, 0x00, 0x08); - RWEC8(0x60, 0x00, 0x00); - RWEC8(0x61, 0x00, 0x62); - RWEC8(0x30, 0x00, 0x01); //;Enable Device 8 - } - //Logical device 0x05 - RWEC8(0x07, 0x00, 0x05); //Select logical device 05, IR controller - RWEC8(0x60, 0x00, pBuildOptPtr->EcLdn5MailBoxAddr >> 8); - RWEC8(0x61, 0x00, (pBuildOptPtr->EcLdn5MailBoxAddr & 0xFF)); - RWEC8(0x70, 0xF0, (pBuildOptPtr->EcLdn5Irq)); //Set IRQ to 05h - RWEC8(0x30, 0x00, 0x01); //Enable logical device 5, IR controller - - RWPMIO(SB_PMIO_REGBB, AccWidthUint8, 0xFF, BIT4); //Enable EC(IMC) to generate SMI to BIOS - ExitEcConfig(); -} - - -void ecInitBeforePciEnum(AMDSBCFG* pConfig){ - if (!(isEcPresent())) - return; //return if EC is not enabled -} - - -void ecInitLatePost(AMDSBCFG* pConfig){ - if (!(isEcPresent()) ) - return; //return if EC is not enabled - //Enable config mode - EnterEcConfig(); //Enable config mode - //for future use - ExitEcConfig(); -} - -#endif diff --git a/src/vendorcode/amd/cimx/sb700/Ec.c b/src/vendorcode/amd/cimx/sb700/Ec.c new file mode 100644 index 0000000..3ad15e1 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/Ec.c @@ -0,0 +1,132 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + +#ifndef NO_EC_SUPPORT + +REG8MASK sb710PorInitPciTable[] = { + // SMBUS Device(Bus 0, Dev 20, Func 0) + {0x00, SMBUS_BUS_DEV_FUN, 0}, + {SB_SMBUS_REG43, ~(UINT8)BIT3, 0x00}, //Make some hidden registers of smbus visible. + {SB_SMBUS_REG38, (UINT8)~(BIT7+BIT5+BIT4+BIT3+BIT2+BIT1), 0x0D}, + {SB_SMBUS_REG38+1, ~(UINT8)(BIT2+BIT1), BIT3 }, + {SB_SMBUS_REGE1, 0xFF, BIT1}, + {SB_SMBUS_REG43, 0xFF, BIT3}, //Make some hidden registers of smbus invisible. + {0xFF, 0xFF, 0xFF}, + + // LPC Device(Bus 0, Dev 20, Func 3) + {0x00, LPC_BUS_DEV_FUN, 0}, + {SB_LPC_REGB8+3, ~(UINT8)(BIT1), BIT7+BIT2}, + {0xFF, 0xFF, 0xFF}, +}; + +REG8MASK sb710PorPmioInitTbl[]={ + // index andmask ormask + {SB_PMIO_REGD7, 0xFF, BIT5}, + {SB_PMIO_REGBB, 0xFF, BIT5}, +}; + + +void ecPowerOnInit(BUILDPARAM *pBuildOptPtr, AMDSBCFG* pConfig){ + UINT8 dbVar0, i=0; + + if (!(isEcPresent())) + return; //return if EC is not enabled + + for(i=0;i<0xFF;i++){ + ReadPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG40, AccWidthUint8 | S3_SAVE, &dbVar0); + if ( dbVar0 & BIT7 ) break; //break if EC is ready + Stall(500); //wait for EC to become ready + } + + if (getRevisionID() >= SB700_A14){ + programPciByteTable( (REG8MASK*)FIXUP_PTR(&sb710PorInitPciTable[0]), sizeof(sb710PorInitPciTable)/sizeof(REG8MASK) ); + programPmioByteTable( (REG8MASK *)FIXUP_PTR(&sb710PorPmioInitTbl[0]), (sizeof(sb710PorPmioInitTbl)/sizeof(REG8MASK)) ); + } + + RWPCI(((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGBA), AccWidthUint8 | S3_SAVE, 0xFF, BIT2); //Enable SPI Prefetch in EC + + //Enable config mode + EnterEcConfig(); + + //Do settings for mailbox - logical device 0x09 + RWEC8(0x07, 0x00, 0x09); //switch to device 9 (Mailbox) + RWEC8(0x60, 0x00, (pBuildOptPtr->EcLdn9MailBoxAddr >> 8)); //set MSB of Mailbox port + RWEC8(0x61, 0x00, (pBuildOptPtr->EcLdn9MailBoxAddr & 0xFF)); //set LSB of Mailbox port + RWEC8(0x30, 0x00, 0x01); //;Enable Mailbox Registers Interface, bit0=1 + + if (pBuildOptPtr->EcKbd == CIMX_OPTION_ENABLED){ + RWPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG60+3), AccWidthUint8 | S3_SAVE, 0xFF, BIT7+BIT3); + //Enable KBRST#, IRQ1 & IRQ12, GateA20 Function signal from IMC + RWPMIO(SB_PMIO_REGBB, AccWidthUint8, 0xFF, BIT3+BIT2+BIT1+BIT0); + //Disable LPC Decoding of port 60/64 + RWPCI(((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG47), AccWidthUint8 | S3_SAVE, ~(UINT32)BIT5, 0); + //Enable logical device 0x07 (Keyboard controller) + RWEC8(0x07, 0x00, 0x07); + RWEC8(0x30, 0x00, 0x01); + } + + if (pBuildOptPtr->EcChannel0 == CIMX_OPTION_ENABLED){ + //Logical device 0x08 + RWEC8(0x07, 0x00, 0x08); + RWEC8(0x60, 0x00, 0x00); + RWEC8(0x61, 0x00, 0x62); + RWEC8(0x30, 0x00, 0x01); //;Enable Device 8 + } + //Logical device 0x05 + RWEC8(0x07, 0x00, 0x05); //Select logical device 05, IR controller + RWEC8(0x60, 0x00, pBuildOptPtr->EcLdn5MailBoxAddr >> 8); + RWEC8(0x61, 0x00, (pBuildOptPtr->EcLdn5MailBoxAddr & 0xFF)); + RWEC8(0x70, 0xF0, (pBuildOptPtr->EcLdn5Irq)); //Set IRQ to 05h + RWEC8(0x30, 0x00, 0x01); //Enable logical device 5, IR controller + + RWPMIO(SB_PMIO_REGBB, AccWidthUint8, 0xFF, BIT4); //Enable EC(IMC) to generate SMI to BIOS + ExitEcConfig(); +} + + +void ecInitBeforePciEnum(AMDSBCFG* pConfig){ + if (!(isEcPresent())) + return; //return if EC is not enabled +} + + +void ecInitLatePost(AMDSBCFG* pConfig){ + if (!(isEcPresent()) ) + return; //return if EC is not enabled + //Enable config mode + EnterEcConfig(); //Enable config mode + //for future use + ExitEcConfig(); +} + +#endif diff --git a/src/vendorcode/amd/cimx/sb700/FLASH.c b/src/vendorcode/amd/cimx/sb700/FLASH.c deleted file mode 100644 index 0d84245..0000000 --- a/src/vendorcode/amd/cimx/sb700/FLASH.c +++ /dev/null @@ -1,58 +0,0 @@ -/***************************************************************************** - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - ***************************************************************************/ - - -#include "Platform.h" - -void fcInitBeforePciEnum(AMDSBCFG* pConfig){ - - TRACE((DMSG_SB_TRACE, "Entering PreInit Flash \n")); - RWPMIO(SB_PMIO_REGB2, AccWidthUint8, ~(UINT32)BIT1, 00); - - //Enable IDE and disable flash - //Enable IDE and disable flash - RWPMIO(SB_PMIO_REG59, AccWidthUint8, ~(UINT32)(BIT1+BIT0), 0); - RWPMIO(SB_PMIO_REGB2, AccWidthUint8, ~(UINT32)(BIT3), BIT0); //Configure GPIO3 as IDE_RST# and release RST - if (pConfig->IdeController){ - //Disabling IDE controller - RWPCI((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG04, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT2+BIT1+BIT0), 0); - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGAE, AccWidthUint8 | S3_SAVE, 0xFF, BIT3); - } - else{ - //Enable IDE controller - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGAE, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT3), 0); - } - - //RPR 8.2 Enable IDE Data bus DD7 Pull down Resistor if IDE is enabled and FC is disabled - RWPMIO2(SB_PMIO2_REGE5, AccWidthUint8, 0xFF, BIT2); - //Slowdown the clock to FC if FC is not enabled, this is a power savings feature - RWPMIO(SB_PMIO_REGB2, AccWidthUint8, ~(UINT32)(BIT4), BIT4); - RWPMIO(SB_PMIO_REGBC, AccWidthUint8, 0xC0, 0); -} diff --git a/src/vendorcode/amd/cimx/sb700/Flash.c b/src/vendorcode/amd/cimx/sb700/Flash.c new file mode 100644 index 0000000..0d84245 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/Flash.c @@ -0,0 +1,58 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + +void fcInitBeforePciEnum(AMDSBCFG* pConfig){ + + TRACE((DMSG_SB_TRACE, "Entering PreInit Flash \n")); + RWPMIO(SB_PMIO_REGB2, AccWidthUint8, ~(UINT32)BIT1, 00); + + //Enable IDE and disable flash + //Enable IDE and disable flash + RWPMIO(SB_PMIO_REG59, AccWidthUint8, ~(UINT32)(BIT1+BIT0), 0); + RWPMIO(SB_PMIO_REGB2, AccWidthUint8, ~(UINT32)(BIT3), BIT0); //Configure GPIO3 as IDE_RST# and release RST + if (pConfig->IdeController){ + //Disabling IDE controller + RWPCI((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG04, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT2+BIT1+BIT0), 0); + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGAE, AccWidthUint8 | S3_SAVE, 0xFF, BIT3); + } + else{ + //Enable IDE controller + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGAE, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT3), 0); + } + + //RPR 8.2 Enable IDE Data bus DD7 Pull down Resistor if IDE is enabled and FC is disabled + RWPMIO2(SB_PMIO2_REGE5, AccWidthUint8, 0xFF, BIT2); + //Slowdown the clock to FC if FC is not enabled, this is a power savings feature + RWPMIO(SB_PMIO_REGB2, AccWidthUint8, ~(UINT32)(BIT4), BIT4); + RWPMIO(SB_PMIO_REGBC, AccWidthUint8, 0xC0, 0); +} diff --git a/src/vendorcode/amd/cimx/sb700/LEGACY.c b/src/vendorcode/amd/cimx/sb700/LEGACY.c deleted file mode 100644 index c904d59..0000000 --- a/src/vendorcode/amd/cimx/sb700/LEGACY.c +++ /dev/null @@ -1,38 +0,0 @@ -/***************************************************************************** - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - ***************************************************************************/ - - -#include "Platform.h" - -UINT32 GetFixUp(){ - STDCFG* Result; - Result = (STDCFG*) getConfigPointer(); - return Result->pImageBase; -} diff --git a/src/vendorcode/amd/cimx/sb700/Legacy.c b/src/vendorcode/amd/cimx/sb700/Legacy.c new file mode 100644 index 0000000..c904d59 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/Legacy.c @@ -0,0 +1,38 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + +UINT32 GetFixUp(){ + STDCFG* Result; + Result = (STDCFG*) getConfigPointer(); + return Result->pImageBase; +} diff --git a/src/vendorcode/amd/cimx/sb700/Makefile.inc b/src/vendorcode/amd/cimx/sb700/Makefile.inc index aed81c4..157af0e 100644 --- a/src/vendorcode/amd/cimx/sb700/Makefile.inc +++ b/src/vendorcode/amd/cimx/sb700/Makefile.inc @@ -32,35 +32,35 @@ CPPFLAGS_x86_32 += -I$(src)/southbridge/amd/cimx/sb700 CPPFLAGS_x86_32 += -I$(src)/include/cpu/amd/common CPPFLAGS_x86_32 += -I$(src)/vendorcode/amd/cimx/sb700
-romstage-y += ACPILIB.c -romstage-y += AMDLIB.c -romstage-y += AMDSBLIB.c -romstage-y += AZALIA.c -romstage-y += DEBUG.c -romstage-y += DISPATCHER.c -romstage-y += EC.c -romstage-y += FLASH.c -romstage-y += SATA.c -romstage-y += SBCMN.c -romstage-y += SBCMNLIB.c -romstage-y += SBMAIN.c -romstage-y += SBPort.c -romstage-y += SMM.c -romstage-y += USB.c +romstage-y += AcpiLib.c +romstage-y += AmdLib.c +romstage-y += AmdSbLib.c +romstage-y += Azalia.c +romstage-y += Debug.c +romstage-y += Dispatcher.c +romstage-y += Ec.c +romstage-y += Flash.c +romstage-y += Sata.c +romstage-y += SbCmn.c +romstage-y += SbCmnLib.c +romstage-y += SbMain.c +romstage-y += SbPort.c +romstage-y += Smm.c +romstage-y += Usb.c
-ramstage-y += ACPILIB.c -ramstage-y += AMDLIB.c -ramstage-y += AMDSBLIB.c -ramstage-y += AZALIA.c -ramstage-y += DEBUG.c -ramstage-y += DISPATCHER.c -ramstage-y += EC.c -ramstage-y += FLASH.c -ramstage-y += SATA.c -ramstage-y += SBCMN.c -ramstage-y += SBCMNLIB.c -ramstage-y += SBMAIN.c -ramstage-y += SBPort.c -ramstage-y += SMM.c -ramstage-y += USB.c -ramstage-y += LEGACY.c +ramstage-y += AcpiLib.c +ramstage-y += AmdLib.c +ramstage-y += AmdSbLib.c +ramstage-y += Azalia.c +ramstage-y += Debug.c +ramstage-y += Dispatcher.c +ramstage-y += Ec.c +ramstage-y += Flash.c +ramstage-y += Sata.c +ramstage-y += SbCmn.c +ramstage-y += SbCmnLib.c +ramstage-y += SbMain.c +ramstage-y += SbPort.c +ramstage-y += Smm.c +ramstage-y += Usb.c +ramstage-y += Legacy.c diff --git a/src/vendorcode/amd/cimx/sb700/SATA.c b/src/vendorcode/amd/cimx/sb700/SATA.c deleted file mode 100644 index d503239..0000000 --- a/src/vendorcode/amd/cimx/sb700/SATA.c +++ /dev/null @@ -1,453 +0,0 @@ -/***************************************************************************** - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - ***************************************************************************/ - - -#include "Platform.h" - -//Table for class code of SATA Controller in different modes -UINT32 sataIfCodeTable[] = { - 0x01018f00, //sata class ID of IDE - 0x01040000, //sata class ID of RAID - 0x01060100, //sata class ID of AHCI - 0x01018a00, //sata class ID of Legacy IDE - 0x01018f00, //sata class ID of IDE to AHCI mode - 0x01060100, //sata class ID of AMD-AHCI mode - 0x01018f00 //sata class ID of IDE to AMD-AHCI mode -}; - -//Table for device id of SATA Controller in different modes -UINT16 sataDeviceIDTable[] = { - 0x4390, //sata device ID of IDE - 0x4392, //sata device ID of RAID - 0x4391, //sata class ID of AHCI - 0x4390, //sata device ID of Legacy IDE - 0x4390, //sata device ID of IDE->AHCI mode - 0x4394, //sata device ID for AMD-AHCI mode - 0x4390 //sata device ID of IDE->AMDAHCI mode -}; - - -void sataInitBeforePciEnum(AMDSBCFG* pConfig){ - UINT32 ddValue, *tempptr; - UINT16 *pDeviceIdptr, dwDeviceId; - UINT8 dbValue, dbOrMask, dbAndMask; - - - dbAndMask=0; - dbOrMask=0; - // Enable/Disable Combined mode & do primary/secondary selections, enable/disable - if (pConfig->SataIdeCombinedMode == CIMX_OPTION_DISABLED) dbAndMask= BIT3; //Clear BIT3 - if (pConfig->SataIdeCombMdPriSecOpt == 1) dbOrMask = BIT4; //Set BIT4 - if (pConfig->SataSmbus == 0) dbOrMask = BIT1; - - RWPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGAD), AccWidthUint8 | S3_SAVE, ~(dbAndMask), dbOrMask); - - if (pConfig->SataController == 0){ - // SATA Controller Disabled & set Power Saving mode to disabled - RWPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGAD), AccWidthUint8 | S3_SAVE, ~(UINT32)BIT0, BIT1); - return; - } - - restrictSataCapabilities(pConfig); - - // Get the appropriate class code from the table and write it to PCI register 08h-0Bh - // Set the appropriate SATA class based on the input parameters - dbValue=pConfig->SataClass; - tempptr= (UINT32 *) FIXUP_PTR (&sataIfCodeTable[0]); - ddValue=tempptr[dbValue]; - - // BIT0: Enable write access to PCI header (reg 08h-0Bh) by setting SATA PCI register 40h, bit 0 - // BIT4:disable fast boot - RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, 0xff, BIT4+BIT0); - - // Write the class code to SATA PCI register 08h-0Bh - RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG08), AccWidthUint32 | S3_SAVE, 0, ddValue); - - if (pConfig->SataClass == LEGACY_IDE_MODE) //SATA = Legacy IDE - //Set PATA controller to native mode - RWPCI(((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG09), AccWidthUint8 | S3_SAVE, 0x00, 0x08F); - - //Change the appropriate device id - if (pConfig->SataClass == AMD_AHCI_MODE) { - RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 3), AccWidthUint8 | S3_SAVE, 0xff, BIT0); - } - pDeviceIdptr= (UINT16 *) FIXUP_PTR (&sataDeviceIDTable[0]); - - ReadPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, &dwDeviceId); - if ( !((dwDeviceId==SB750_SATA_DEFAULT_DEVICE_ID) && (pConfig->SataClass == RAID_MODE)) ){ - //if not (SB750 & RAID mode), then program the device id - dwDeviceId=pDeviceIdptr[dbValue]; - RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, 0, dwDeviceId); - } - - if (pConfig->AcpiS1Supported) - RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG34), AccWidthUint8 | S3_SAVE, 00, 0x70);//Disable SATA PM & MSI capability - else - RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG60+1), AccWidthUint8 | S3_SAVE, 00, 0x70);//Disable SATA MSI capability - - if (getRevisionID() >= SB700_A13){ - //Enable test/enhancement mode for A13 - RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40+3), AccWidthUint8 | S3_SAVE, ~(UINT32)BIT5, 00); - RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG48), AccWidthUint32 | S3_SAVE, ~(UINT32)(BIT24+BIT21), 0xBF80); - } - - if (getRevisionID() >= SB700_A14){ - //Fix for TT SB01352 - LED Stays On When ODD Attached To Slave Port In IDE Mode - RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG48), AccWidthUint8 | S3_SAVE, 0xFF, BIT6); - } - - // Disable write access to PCI header - RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, ~(UINT32)BIT0, 0); - - // RPR 6.5 SATA PHY Programming Sequence - RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG86, AccWidthUint16 | S3_SAVE, 0x00, 0x2C00); - RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG88, AccWidthUint32 | S3_SAVE, 0x00, 0x01B48016); - RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG8C, AccWidthUint32 | S3_SAVE, 0x00, 0x01B48016); - RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG90, AccWidthUint32 | S3_SAVE, 0x00, 0x01B48016); - RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG94, AccWidthUint32 | S3_SAVE, 0x00, 0x01B48016); - RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG98, AccWidthUint32 | S3_SAVE, 0x00, 0x01B48016); - RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG9C, AccWidthUint32 | S3_SAVE, 0x00, 0x01B48016); - RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REGA0, AccWidthUint32 | S3_SAVE, 0x00, 0xA07AA07A); - RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REGA4, AccWidthUint32 | S3_SAVE, 0x00, 0xA07AA07A); - RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REGA8, AccWidthUint32 | S3_SAVE, 0x00, 0xA07AA07A); - - CallBackToOEM(SATA_PHY_PROGRAMMING, NULL, pConfig); -} - -void sataInitAfterPciEnum(AMDSBCFG* pConfig){ - UINT32 ddAndMask=0, ddOrMask=0, ddBar5=0; - UINT8 dbVar, dbPortNum; - - if (pConfig->SataController == 0) return; //return if SATA controller is disabled. - - //Enable write access to pci header, pm capabilities - RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, 0xFF, BIT0); - - //Disable AHCI enhancement function (RPR 7.2) - RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8 | S3_SAVE, 0xFF, BIT7); - - restrictSataCapabilities(pConfig); - - ReadPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG24), AccWidthUint32, &ddBar5); - - if ( (ddBar5 == 0) || (ddBar5 == -1) ) { - //assign temporary BAR5 - if ( (pConfig->TempMMIO == 0) || (pConfig->TempMMIO == -1)) - ddBar5 = 0xFEC01000; - else - ddBar5=pConfig->TempMMIO; - - WritePCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG24), AccWidthUint32, &ddBar5); - } - - ReadPCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar); - RWPCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8,0xFF, 0x03); //memory and io access enable - - ddBar5 &= 0xFFFFFC00; //Clear Bits 9:0 - if (!pConfig->SataPortMultCap) - ddAndMask |= BIT12; - if (!pConfig->SataAggrLinkPmCap) - ddAndMask |= BIT11; - if (pConfig->SataSscPscCap) - ddOrMask |= BIT1; - - RWMEM((ddBar5 + SB_SATA_BAR5_REGFC),AccWidthUint32 | S3_SAVE, ~ddAndMask, ddOrMask); - - - //Clear HPCP and ESP by default - RWMEM((ddBar5 + SB_SATA_BAR5_REGF8),AccWidthUint32 | S3_SAVE, 0xFFFC0FC0, 0); - - if (pConfig->SataHpcpButNonESP !=0) { - RWMEM((ddBar5 + SB_SATA_BAR5_REGF8),AccWidthUint32 | S3_SAVE, 0xFFFFFFC0, pConfig->SataHpcpButNonESP); - } - - // SATA ESP port setting - // These config bits are set for SATA driver to identify which ports are external SATA ports and need to - // support hotplug. If a port is set as an external SATA port and need to support hotplug, then driver will - // not enable power management(HIPM & DIPM) for these ports. - if (pConfig->SataEspPort !=0) { - RWMEM((ddBar5 + SB_SATA_BAR5_REGFC),AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, BIT20); - RWMEM((ddBar5 + SB_SATA_BAR5_REGF8),AccWidthUint32 | S3_SAVE, ~(pConfig->SataEspPort), 0); - RWMEM((ddBar5 + SB_SATA_BAR5_REGF8),AccWidthUint32 | S3_SAVE, ~(UINT32)(BIT17+BIT16+BIT15+BIT14+BIT13+BIT12),(pConfig->SataEspPort << 12)); - } - - if ( ((pConfig->SataClass) != NATIVE_IDE_MODE) && ((pConfig->SataClass) != LEGACY_IDE_MODE) ) - RWPCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG50+2), AccWidthUint8, ~(UINT32)(BIT3+BIT2+BIT1), BIT2+BIT1); //set MSI to 8 messages - - if ( ((pConfig->SataClass) != NATIVE_IDE_MODE) && ((pConfig->SataClass) != LEGACY_IDE_MODE) && ((pConfig->SataIdeCombinedMode) == CIMX_OPTION_DISABLED) ){ - RWMEM((ddBar5 + SB_SATA_BAR5_REG00),AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT2+BIT1+BIT0), BIT2+BIT0); - RWMEM((ddBar5 + SB_SATA_BAR5_REG0C),AccWidthUint8 | S3_SAVE, 0xC0, 0x3F); - } - - for (dbPortNum=0;dbPortNum<=5;dbPortNum++){ - if (pConfig->SataPortMode & (1 << dbPortNum)){ - //downgrade to GEN1 - RWMEM(ddBar5+ SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0x0F, 0x10); - RWMEM(ddBar5+ SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0xFF, 0x01); - Stall(1000); - RWMEM(ddBar5+ SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0xFE, 0x00); - } - } - - //If this is not S3 resume and also if SATA set to one of IDE mode, then implement drive detection workaround. - if ( !(pConfig->S3Resume) && ( ((pConfig->SataClass) != AHCI_MODE) && ((pConfig->SataClass) != RAID_MODE) && ((pConfig->SataClass) != AMD_AHCI_MODE) ) ) - sataDriveDetection(pConfig, ddBar5); - - if ( (pConfig->SataPhyWorkaround==1) || ( (pConfig->SataPhyWorkaround==0) && (getRevisionID() < SB700_A13)) ) - sataPhyWorkaround(pConfig, ddBar5); - - // Set the handshake bit for IDE driver to detect the disabled IDE channel correctly. - // Set IDE PCI Config 0x63 [3] if primary channel disabled, [4] if secondary channel disabled. - if (pConfig->SataIdeCombinedMode == CIMX_OPTION_DISABLED) - RWPCI( ((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG63), AccWidthUint8 , 0xF9, (0x02 << (pConfig->SataIdeCombMdPriSecOpt)) ); - - WritePCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar); - - //Disable write access to pci header, pm capabilities - RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, ~(UINT32)BIT0, 0); -} - - -void sataDriveDetection(AMDSBCFG* pConfig, UINT32 ddBar5){ - UINT32 ddVar0; - UINT8 dbPortNum, dbVar0; - UINT32 dwIoBase, dwVar0; - - TRACE((DMSG_SB_TRACE, "CIMx - Entering sata drive detection procedure\n\n")); - TRACE((DMSG_SB_TRACE, "SATA BAR5 is %X \n", ddBar5)); - - if ( (pConfig->SataClass == NATIVE_IDE_MODE) || (pConfig->SataClass == LEGACY_IDE_MODE) || (pConfig->SataClass == IDE_TO_AHCI_MODE) || (pConfig->SataClass == IDE_TO_AMD_AHCI_MODE) ){ - for (dbPortNum=0;dbPortNum<4;dbPortNum++){ - ReadMEM(ddBar5+ SB_SATA_BAR5_REG128 + dbPortNum * 0x80, AccWidthUint32, &ddVar0); - if ( ( ddVar0 & 0x0F ) == 0x03){ - if ( dbPortNum & BIT0) - //this port belongs to secondary channel - ReadPCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG18), AccWidthUint16, &dwIoBase); - else - //this port belongs to primary channel - ReadPCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG10), AccWidthUint16, &dwIoBase); - - //if legacy ide mode, then the bar registers don't contain the correct values. So we need to hardcode them - if (pConfig->SataClass == LEGACY_IDE_MODE) - dwIoBase = ( (0x170) | ( (~((dbPortNum & BIT0) << 7)) & 0x80 ) ); - - if ( dbPortNum & BIT1) - //this port is slave - dbVar0=0xB0; - else - //this port is master - dbVar0=0xA0; - dwIoBase &= 0xFFF8; - WriteIO(dwIoBase+6, AccWidthUint8, &dbVar0); - - //Wait in loop for 30s for the drive to become ready - for (dwVar0=0;dwVar0<3000;dwVar0++){ - ReadIO(dwIoBase+7, AccWidthUint8, &dbVar0); - if ( (dbVar0 & 0x88) == 0) - break; - Stall(10000); - } - } //end of if ( ( ddVar0 & 0x0F ) == 0x03) - } //for (dbPortNum=0;dbPortNum<4;dbPortNum++) - } //if ( (pConfig->SataClass == NATIVE_IDE_MODE) || (pConfig->SataClass == LEGACY_IDE_MODE) || (pConfig->SataClass == IDE_TO_AHCI_MODE) || (pConfig->SataClass == IDE_TO_AMD_AHCI_MODE) ) -} - - -//This patch is to workaround the SATA PHY logic hardware issue in the SB700. -//Internally this workaround is called as 7NewA -void sataPhyWorkaround(AMDSBCFG* pConfig, UINT32 ddBar5){ - - UINT8 dbPortNum, dbVar0; - - if (pConfig->Gen1DeviceShutdownDuringPhyWrknd == 0x01){ - for (dbPortNum=0;dbPortNum<=5;dbPortNum++){ - ReadMEM(ddBar5+ SB_SATA_BAR5_REG128 + dbPortNum * 0x80, AccWidthUint8, &dbVar0); - if ( (dbVar0 & 0xF0) == 0x10){ - RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40+2, AccWidthUint8 | S3_SAVE, 0xFF, (01 << dbPortNum)); - } - - } - } - - RWPMIO(SB_PMIO_REGD0, AccWidthUint8, ~(UINT32)(BIT4+BIT3), BIT4+BIT3);//set PMIO_D0[4:3] = 11b // this is to tell SATA PHY to use the internal 100MHz clock - RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG86, AccWidthUint8 | S3_SAVE, 0x00, 0x40);// set SATA PCI_CFG 0x86[7:0] = 0x40 //after the reset is done, perform this to turn on the diff clock path into SATA PHY - Stall(2000);// Wait for 2ms - RWPMIO(SB_PMIO_REGD0, AccWidthUint8, ~(UINT32)(BIT4+BIT3), 00);//13. set PMIO_D0[4:3] = 00b - Stall(20000);// Wait 20ms - forceOOB(ddBar5);// Force OOB - - RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40+2, AccWidthUint8 | S3_SAVE, ~(0x03F), 00); -} - - -void forceOOB(UINT32 ddBar5){ - UINT8 dbPortNum; - for (dbPortNum=0;dbPortNum<=5;dbPortNum++) - RWMEM(ddBar5+ SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0xFF, 0x01); - Stall(2000); - for (dbPortNum=0;dbPortNum<=5;dbPortNum++) - RWMEM(ddBar5+ SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0xFE, 0x00); - Stall(2000);// Wait for 2ms -} - -/*++ - -Routine Description: - - SATA Late Configuration - - if the mode is selected as IDE->AHCI - { 1. Set class ID to AHCI - 2. Enable AHCI interrupt - } - -Arguments: - - pConfig - SBconfiguration - -Returns: - - void - ---*/ -void sataInitLatePost(AMDSBCFG* pConfig){ - UINT32 ddBar5; - UINT8 dbVar; - - //Return immediately is sata controller is not enabled - if (pConfig->SataController == 0) return; - - restrictSataCapabilities(pConfig); - - //Get BAR5 value - ReadPCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG24), AccWidthUint32, &ddBar5); - - //Assign temporary BAR if is not already assigned - if ( (ddBar5 == 0) || (ddBar5 == -1) ){ - //assign temporary BAR5 - if ( (pConfig->TempMMIO == 0) || (pConfig->TempMMIO == -1)) - ddBar5 = 0xFEC01000; - else - ddBar5=pConfig->TempMMIO; - WritePCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG24), AccWidthUint32, &ddBar5); - } - - ReadPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar); - //Enable memory and io access - RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, 0xFF, 0x03); - //Enable write access to pci header, pm capabilities - RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, 0xff, BIT0); - - shutdownUnconnectedSataPortClock(pConfig, ddBar5); - - if ( (pConfig->SataClass == IDE_TO_AHCI_MODE) || (pConfig->SataClass == IDE_TO_AMD_AHCI_MODE)){ - //program the AHCI class code - RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG08), AccWidthUint32 | S3_SAVE, 0, 0x01060100); - //Set interrupt enable bit - RWMEM((ddBar5 + 0x04),AccWidthUint8,~(UINT32)0,BIT1); - //program the correct device id for AHCI mode - RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, 0, 0x4391); - - if (pConfig->SataClass == IDE_TO_AMD_AHCI_MODE) - //program the correct device id for AMD-AHCI mode - RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 3), AccWidthUint8 | S3_SAVE, 0xFF, BIT0); - } - - //Disable write access to pci header and pm capabilities - RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, ~(UINT32)BIT0, 0); - //Clear error status - RWMEM((ddBar5 + SB_SATA_BAR5_REG130),AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); - RWMEM((ddBar5 + SB_SATA_BAR5_REG1B0),AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); - RWMEM((ddBar5 + SB_SATA_BAR5_REG230),AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); - RWMEM((ddBar5 + SB_SATA_BAR5_REG2B0),AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); - //Restore memory and io access bits - WritePCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar ); -} - - -void shutdownUnconnectedSataPortClock(AMDSBCFG* pConfig, UINT32 ddBar5){ - UINT8 dbPortNum, dbPortSataStatus, NumOfPorts=0; - UINT8 UnusedPortBitMap; - UINT8 SataType; - UINT8 ClockOffEnabled ; - - UnusedPortBitMap = 0; - - // First scan for all unused SATA ports - for (dbPortNum = 5; dbPortNum <= 5; dbPortNum--) { - ReadMEM (ddBar5 + SB_SATA_BAR5_REG128 + (dbPortNum * 0x80), AccWidthUint8, &dbPortSataStatus); - if ((!(dbPortSataStatus & 0x01)) && (!((pConfig->SataEspPort) & (1 << dbPortNum)))) { - UnusedPortBitMap |= (1 << dbPortNum); - } - } - - // Decide if we need to shutdown the clock for all unused ports - SataType = pConfig->SataClass; - ClockOffEnabled = (pConfig->SataClkAutoOff && ((SataType == NATIVE_IDE_MODE) || (SataType == LEGACY_IDE_MODE) || \ - (SataType == IDE_TO_AHCI_MODE) || (SataType == IDE_TO_AMD_AHCI_MODE))) || \ - (pConfig->SataClkAutoOffAhciMode && ((SataType == AHCI_MODE) || (SataType == AMD_AHCI_MODE))); - - if (ClockOffEnabled) { - //Shutdown the clock for the port and do the necessary port reporting changes. - TRACE((DMSG_SB_TRACE, "Shutting down clock for SATA ports %X \n", UnusedPortBitMap)); - RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8, 0xFF, UnusedPortBitMap); - RWMEM(ddBar5 + SB_SATA_BAR5_REG0C, AccWidthUint8, ~UnusedPortBitMap, 00); - } - - // If all ports are in disabled state, report at least one - ReadMEM (ddBar5 + SB_SATA_BAR5_REG0C, AccWidthUint8, &dbPortSataStatus); - if ( (dbPortSataStatus & 0x3F) == 0) { - dbPortSataStatus = 1; - RWMEM (ddBar5 + SB_SATA_BAR5_REG0C, AccWidthUint8, ~(0x3F), dbPortSataStatus); - } - - // Decide if we need to hide unused ports from being seen by OS (this saves OS startup time) - if (pConfig->SataHideUnusedPort && ClockOffEnabled) { - dbPortSataStatus &= ~UnusedPortBitMap; // Mask off unused ports - for (dbPortNum = 0; dbPortNum <= 6; dbPortNum++) { - if (dbPortSataStatus & (1 << dbPortNum)) - NumOfPorts++; - } - if (NumOfPorts == 0 ) { - NumOfPorts = 0x01; - } - RWMEM (ddBar5 + SB_SATA_BAR5_REG00, AccWidthUint8, 0xE0, NumOfPorts - 1); - } -} - - -void restrictSataCapabilities(AMDSBCFG* pConfig){ - //Restrict capabilities - if ( ((getSbCapability(Sb_Raid0_1_Capability)== 0x02) && (pConfig->SataClass == RAID_MODE)) || \ - ((getSbCapability(Sb_Raid5_Capability)== 0x02) && (pConfig->SataClass == RAID_MODE)) || \ - ((getSbCapability(Sb_Ahci_Capability)== 0x02) && ((pConfig->SataClass == AHCI_MODE) || (pConfig->SataClass == IDE_TO_AHCI_MODE)))){ - pConfig->SataClass = NATIVE_IDE_MODE; - } -} diff --git a/src/vendorcode/amd/cimx/sb700/SBCMN.c b/src/vendorcode/amd/cimx/sb700/SBCMN.c deleted file mode 100644 index 7d5b4f4..0000000 --- a/src/vendorcode/amd/cimx/sb700/SBCMN.c +++ /dev/null @@ -1,572 +0,0 @@ -/***************************************************************************** - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - ***************************************************************************/ - - -#include "Platform.h" - - -REG8MASK sbEarlyPostByteInitTable[]={ - // SMBUS Device(Bus 0, Dev 20, Func 0) - {0x00, SMBUS_BUS_DEV_FUN, 0}, - {SB_SMBUS_REG43, ~(UINT8)BIT3, 0x00}, //Make BAR registers of smbus visible. - {SB_SMBUS_REG24, 0X00, (CIMx_Version & 0xFF)}, //Program the version information - {SB_SMBUS_REG24+1, 0x00, (CIMx_Version >> 8)}, - {SB_SMBUS_REG24+2, 0x00, RC_Information}, - {SB_SMBUS_REG24+3, 0x00, Additional_Changes_Indicator}, - {SB_SMBUS_REG43, ~(UINT8)BIT3, BIT3}, //Make BAR registers of smbus invisible. - {SB_SMBUS_REGAE, ~(UINT8)(BIT6 + BIT5), BIT6 + BIT5}, //Disable Timer IRQ enhancement for proper operation of the 8254 timer. - // [6] - IoApicPicArbEn, set 1 to enable arbiter between APIC and PIC interrupts - {SB_SMBUS_REGAD, ~(UINT8)(BIT0+BIT1+BIT2+BIT4), BIT0+BIT3}, // Initialize SATA to default values, SATA Enabled, - // Combined mode enabled, SATA as primary, power saving enable - {SB_SMBUS_REGAF, 0xE3, 6 << 2}, // Set SATA Interrupt to INTG# - {SB_SMBUS_REG68, BIT3, 0 }, // First disable all usb controllers and then enable then according to setup selection - {0xFF, 0xFF, 0xFF}, - - // IDE Device(Bus 0, Dev 20, Func 1) - {0x00, IDE_BUS_DEV_FUN, 0}, - {SB_IDE_REG62+1, ~(UINT8)BIT0, BIT5}, // Enabling IDE Explicit Pre-Fetch IDE PCI Config 0x62[8]=0 - // Allow MSI capability of IDE controller to be visible. IDE PCI Config 0x62[13]=1 - {0xFF, 0xFF, 0xFF}, - - // Azalia Device(Bus 0, Dev 20, Func 2) - {0x00, AZALIA_BUS_DEV_FUN, 0}, - {SB_AZ_REG4C, ~(UINT8)BIT0, BIT0}, - {0xFF, 0xFF, 0xFF}, - - // LPC Device(Bus 0, Dev 20, Func 3) - {0x00, LPC_BUS_DEV_FUN, 0}, - - {SB_LPC_REG40, ~(UINT8)BIT2, BIT2}, // Enabling LPC DMA Function 0x40[2] - {SB_LPC_REG78, ~(UINT8)BIT1, 00}, // Disables MSI capability - {0xFF, 0xFF, 0xFF}, - - // P2P Bridge(Bus 0, Dev 20, Func 4) - {0x00, SBP2P_BUS_DEV_FUN, 0}, - - {SB_P2P_REG64+1, 0xFF, BIT7+BIT6}, //Adjusting CLKRUN#, PCIB_PCI_Config 0x64[15]=01 - //Enabling arbiter fix, PCIB_PCI_Config 0x64[14]=01 - {SB_P2P_REG64+2, 0xFF, BIT4}, //Enabling One-Prefetch-Channel Mode, PCIB_PCI_config 0x64 [20] - - {SB_P2P_REG0D, 0x00, 0x40}, //Setting Latency Timers to 0x40, Enables the PCIB to retain ownership - {SB_P2P_REG1B, 0x00, 0x40}, // of the bus on the Primary side and on the Secondary side when GNT# is deasserted. - - {0xFF, 0xFF, 0xFF}, - - // SATA Device(Bus 0, Dev 17, Func 0) - {0x00, SATA_BUS_DEV_FUN, 0}, - {SB_SATA_REG44, 0xff, BIT0}, // Enables the SATA watchdog timer register prior to the SATA BIOS post - {SB_SATA_REG40+3, 0xff, BIT5}, // RPR setting: Disable the testing/enhancement mode SATA_PCI_config 0x40 [29] = 1 - {SB_SATA_REG48+2, 0xff, BIT5}, // RPR setting: Disable the testing/enhancement mode SATA_PCI_config 0x48 [24] = 1, [21] = 1 - {SB_SATA_REG48+3, 0xff, BIT0}, - {SB_SATA_REG44 + 2, 0, 0x10}, // Program watchdog timer with 16 retries before timer time-out. - {0xFF, 0xFF, 0xFF}, -}; - - -REG8MASK sbEarlyPostPmioInitTbl[]={ - // index andmask ormask - {SB_PMIO_REG55, ~(UINT8)(BIT3+BIT4+BIT5), BIT5+BIT3}, //BIT3(PcieNative)=1b, BIT4(Pcie_Wak_Mask)=0b, BIT5(Pcie_WAK_Sci)=1b - {SB_PMIO_REG01, 0xff, BIT1}, - {SB_PMIO_REG0E, 0xff, BIT2 + BIT3}, - {SB_PMIO_REG10, 0x3E, (BIT6+BIT5+BIT3+BIT1)}, // RTC_En_En + TMR_En_En + GLB_EN_EN and clear EOS_EN + PciExpWakeDisEn - {SB_PMIO_REG61, 0xFF, 0x40}, // USB Device Support to Wakeup System from S3/S4 state, USB PME & PCI Act from NB - {SB_PMIO_REG59, 0xFC, 0x00 }, // Clear the flash controller bits BIT1:0 - {SB_PMIO_REG01, 0xFF, 0x97 }, // Clear all the status - {SB_PMIO_REG05, 0xFF, 0xFF }, - {SB_PMIO_REG06, 0xFF, 0xFF }, - {SB_PMIO_REG07, 0xFF, 0xFF }, - {SB_PMIO_REG0F, 0xFF, 0x1F }, - {SB_PMIO_REG1D, 0xFF, 0xFF }, - {SB_PMIO_REG39, 0xFF, 0xFF }, - {SB_PMIO_REG7C, ~(UINT8)(BIT5+BIT3+BIT2), BIT3+BIT2}, //Turn on BLink LED - {SB_PMIO_REG67, 0xFF, 0x06}, // C State enable, must be set in order to exercise C state - {SB_PMIO_REG68, 0x38, 0x84}, - {SB_PMIO_REG8D, 0xFF, 0x01}, // Set PM_Reg_0x8D[0] to enable PmeTurnOff/PmeMsgAck handshake to fix PCIE LAN S3/S4 wake failure - {SB_PMIO_REG84, 0xFD, BIT3+BIT0}, - {SB_PMIO_REG53, 0xFF, BIT7+BIT6}, //ACPI System Clock setting, PMIO Reg 0x53[6]=1. Our reference clock - //is either 25 or 100Mhz and so the default acpi clock is actually - //running at 12.5Mhz and so the system time will run slow. We have - //generated another internal clock which runs at 14.318Mhz which is the - //correct frequency. We should set this bit to turn on this feature PMIO_REG53[6]=1 - //PCI Clock Period, PM_IO 0x53 [7] = 1. By setting this, PCI clock period - //increase to 30.8 ns. - {SB_PMIO_REG95, ~(UINT8)(BIT2+BIT1+BIT0), BIT2+BIT1}, //USB Advanced Sleep Control, Enables USB EHCI controller - //to sleep for 6 uframes in stead of the standard 10us to - //improve power saving. - {SB_PMIO_REGD7, 0xFF, BIT6+BIT1}, - -}; - - -// commonInitEarlyBoot - set /SMBUS/ACPI/IDE/LPC/PCIB. This settings should be done during S3 resume also -void commonInitEarlyBoot(AMDSBCFG* pConfig) { - UINT16 dwTempVar; - CPUID_DATA CpuId; - CPUID_DATA CpuId_Brand; - UINT8 dbValue; - UINT32 ddValue; - UINT8 Family, Model, Stepping; - - TRACE((DMSG_SB_TRACE, "CIMx - Entering commonInitEarlyBoot \n")); - CpuidRead (0x01, &CpuId); - CpuidRead (0x80000001, &CpuId_Brand); //BrandID - - //Early post initialization of pci config space - programPciByteTable( (REG8MASK*)FIXUP_PTR(&sbEarlyPostByteInitTable[0]), sizeof(sbEarlyPostByteInitTable)/sizeof(REG8MASK) ); - - // RPR 5.5 Clear PM_IO 0x65[4] UsbResetByPciRstEnable, Set this bit so that usb gets reset whenever there is PCIRST. - RWPMIO(SB_PMIO_REG65, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT4, BIT4); - - - #if 0 //KZ [083011]-It's used wrong BIOS SIZE for Coreboot. - //For being compatible with earlier revision, check whether ROM decoding is changed already outside CIMx before - //changing it. - ReadPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG68, AccWidthUint16 | S3_SAVE, &dwTempVar); - if ( (dwTempVar == 0x08) || (dwTempVar == 0x00)) - RWPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG68, AccWidthUint8 | S3_SAVE, 0, 0x0E);// Change the 1Mb below ROM decoding range to 0xE0000 to 0xFFFFF - #endif - - if (pConfig->AzaliaController == 1) - RWPMIO(SB_PMIO_REG59, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT3, 0); - else - RWPMIO(SB_PMIO_REG59, AccWidthUint8 | S3_SAVE, 0xFF, BIT3); - - //Disable or Enable PCI Clks based on input - RWPCI((SBP2P_BUS_DEV_FUN << 16) + SB_P2P_REG42, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT5+BIT4+BIT3+BIT2), ((pConfig->PciClks) & 0x0F) << 2 ); - RWPCI((SBP2P_BUS_DEV_FUN << 16) + SB_P2P_REG4A, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT1+BIT0), ((pConfig->PciClks) >> 4) | ((pConfig->PciClk5) << 1) ); - ReadPMIO(SB_PMIO_REG2C, AccWidthUint16, &dwTempVar); // Read Arbiter address, Arbiter address is in PMIO 2Ch - RWIO(dwTempVar, AccWidthUint8, 0, 0); // Write 0 to enable the arbiter - - abLinkInitBeforePciEnum(pConfig); // Set ABCFG registers - // Set LDTSTP# duration to 10us for HydraD CPU model 8, 9 or A; or when HT link is 200MHz; or Family15 Orochi CPU C32/G34 package - ddValue = CpuId.REG_EAX & 0x00FF00F0; - dbValue = 1; - - if((CpuId.REG_EAX & 0x00F00F00) == 0x00600F00) { - if(((CpuId_Brand.REG_EBX & 0xF0000000) == 0x30000000) || ((CpuId_Brand.REG_EBX & 0xF0000000) == 0x50000000)) { - //Orochi processor G34/C32, set to 10us - dbValue = 10; - } - else { - // Orochi processor AM3, set to 5us - dbValue = 5; - } - } - - if ((pConfig->AnyHT200MhzLink) || (ddValue == 0x100080) || (ddValue == 0x100090) || (ddValue == 0x1000A0)) { - //any kind of CPU run HT at 200Mhz , or HydraD CPU model 8, 9 or A, set to 10us - dbValue = 10; - } - - - RWPMIO(SB_PMIO_REG8B, AccWidthUint8 | S3_SAVE, 0x00, dbValue); - - // Enable/Disable watchdog timer - RWPMIO(SB_PMIO_REG69, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT0, (UINT8)(!pConfig->WatchDogTimerEnable)); - - // Per SB700/SP5100 RPR 2.5 - // - // Enable C1e stutter timer for any system with chip revision >= A14 - // Set SMBUS:0x5c[22:16] = 16 -- Set amount of idle time to 16ms - // - - if (getRevisionID() >= SB700_A14) { - dwTempVar = 0x0010; - - // Set PMIO:0xcb[5] = 1 -- AutoStutterTimerEn, set 1 to enable - // Set PMIO:0xcb[6] = 1 -- AutoStutterTimeSel, 1=1ms timer tick increment; 0=2us increment - RWPMIO(SB_PMIO_REGCB, AccWidthUint8 | S3_SAVE, 0xff, BIT6 + BIT5); - - Family = (UINT8)((CpuId.REG_EAX & 0x00ff0000)>> 16); - Model = (UINT8)((CpuId.REG_EAX & 0x000000f0)>> 4); - Stepping = (UINT8) (CpuId.REG_EAX & 0x0000000f); - - // For Server system (SP5100) with CPU type = Family 10h with LS2 mode enabled: - // Model=6 && Stepping=2 || Model=(4I5|6) && Stepping >=3 || Model=(8|9) && Stepping >= 1 || Model Ah - // Set SMBUS:0x5c[22:16] = 20 -- Set amount of idle time to 20ms - if (IsLs2Mode() && (Family == 0x10)) { - switch( Model ){ - case 0x4: - case 0x5: - if( Stepping >= 3 ) dwTempVar = 0x14; - break; - case 0x6: - if( Stepping >= 2 ) dwTempVar = 0x14; - break; - case 0x8: - if( Stepping >= 1 ) dwTempVar = 0x14; - break; - case 0x9: - if( Stepping >= 1 ) dwTempVar = 0x14; - break; - case 0xA: - dwTempVar = 0x14; - break; - } - } - // Set SMBUS:0x5c[7] = 1 -- CheckC3, set 1 to check for C3 state - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG5C, AccWidthUint32 | S3_SAVE, ~(0x7F << 16), (dwTempVar << 16) + BIT7); - } - - //Message-Triggered C1E is not supported in Family 10h G34r1 HY-D0 (0x00100F90) and Family 10h C32 HY-D0 (0x00100F80) processor. - ddValue = CpuId.REG_EAX; - if ((getRevisionID() == SB700_A15) && (pConfig->MTC1e == CIMX_OPTION_ENABLED) && (ddValue != 0x00100F90) && (ddValue != 0x00100F80)) { - // - // MTC1e: For A15 (server only) - The settings here borrow the existing legacy ACPI BM_STS and BM_RLD bits as a - // mechanism to break out from C1e under a non-OS controlled C3 state. Under this scheme, the logic will automatically - // clear the BM_STS bit whenever it enters C1e state. Whenever BM_REQ#/IDLE_EXIT# is detected, it will cause the - // BM_STS bit to be set and therefore causing the C state logic to exit. - // - // Set BMReqEnable (SMBUS:0x64[5]=1) to enable the pin as BM_REQ#/IDLE_EXIT# to the C state logic - // Set CheckOwnReq (SMBUS:0x64[4]=0) to force IDLE_EXIT# to set BM_STS and wake from C3 - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG64, AccWidthUint8 | S3_SAVE, 0xEF, BIT5); - - // Set PCI_Active_enable (PMIO:0x61[2]=1), the secondary enable bit for SB to monitor BM_REQ#/IDLE_EXIT# - RWPMIO(SB_PMIO_REG61, AccWidthUint8 | S3_SAVE, 0xff, BIT2); - - // Set auto_bm_rld (PMIO:0x9a[4]=1) so that assertion on BM_REQ#/IDLE_EXIT# pin will cause C state logic to break out from C1e - // Set auto_clr_bm_sts (PMIO:0x9a[5]=1) will cause the C state logic to automatically clear the BM_STS bit whenever it sees a C1e entry - RWPMIO(SB_PMIO_REG9A, AccWidthUint8 | S3_SAVE, 0xff, BIT5 + BIT4); - - - // MTC1e: The logic basically counts the number of HALT_ENTER messages. When it has received the number of HALT_ENTER - // messages equal to NumOfCpu (PMIO:0xc9[3:0]), it will generate an internal C1e command to the C state logic. - // The count increments when it sees HALT_ENTER message after it has generated the C1e command, and it treats the - // HALT_EXIT message as a break event. - // - // Set ServerCEn - RWPMIO(SB_PMIO_REGBB, AccWidthUint8 | S3_SAVE, 0xFF, BIT7); - - // Enable counting HALT - // PMIO:0xc9[4] = CountHaltMsgEn - // PMIO:0xc9[3:0] = NumOfCpu, set to 1 since CPU logic will coordinate among cores and only generate one HALT message - RWPMIO(SB_PMIO_REGC9, AccWidthUint8 | S3_SAVE, 0xE0, BIT4 + 1); - } - - c3PopupSetting(pConfig); - - TRACE((DMSG_SB_TRACE, "CIMx - Exiting commonInitEarlyBoot \n")); -} - - -void commonInitEarlyPost(AMDSBCFG* pConfig){ - //early post initialization of pmio space - programPmioByteTable( (REG8MASK *)FIXUP_PTR(&sbEarlyPostPmioInitTbl[0]), (sizeof(sbEarlyPostPmioInitTbl)/sizeof(REG8MASK)) ); - CallBackToOEM(PULL_UP_PULL_DOWN_SETTINGS, NULL, pConfig); -} - - -// AB-Link Configuration Table -ABTBLENTRY abTblEntry600[]={ - // Enabling Downstream Posted Transactions to Pass Non-Posted Transactions for the K8 Platform ABCFG 0x10090[8] = 1 - // ABCFG 0x10090 [16] = 1, ensures the SMI# message to be sent before the IO command is completed. The ordering of - // SMI# and IO is important for the IO trap to work properly. - {ABCFG,SB_AB_REG10090 ,BIT16+BIT8 ,BIT16+BIT8 }, - // Enabling UpStream DMA Access AXCFG: 0x04[2]=1 - {AXCFG,SB_AB_REG04 ,BIT2 ,BIT2 }, - // Setting B-Link Prefetch Mode ABCFG 0x80 [17] = 1 ABCFG 0x80 [18] = 1 - {ABCFG,SB_AB_REG80 ,BIT17+BIT18 ,BIT17+BIT18 }, - // Disable B-Link client's credit variable in downstream arbitration equation (for All Revisions) - // ABCFG 0x9C[0] = 1 Disable credit variable in downstream arbitration equation - // Enabling Additional Address Bits Checking in Downstream Register Programming - // ABCFG 0x9C[1] = 1 - {ABCFG,SB_AB_REG9C ,BIT8+BIT1+BIT0 ,BIT8+BIT1+BIT0 }, - // Enabling IDE/PCIB Prefetch for Performance Enhancement - // IDE prefetch ABCFG 0x10060 [17] = 1 ABCFG 0x10064 [17] = 1 - // PCIB prefetch ABCFG 0x10060 [20] = 1 ABCFG 0x10064 [20] = 1 - {ABCFG,SB_AB_REG10060 ,BIT17+BIT20 ,BIT17+BIT20 }, // IDE+PCIB prefetch enable - {ABCFG,SB_AB_REG10064 ,BIT17+BIT20 ,BIT17+BIT20 }, // IDE+PCIB prefetch enable - // Enabling Detection of Upstream Interrupts ABCFG 0x94 [20] = 1 - // ABCFG 0x94 [19:0] = cpu interrupt delivery address [39:20] - {ABCFG,SB_AB_REG94 ,BIT20 ,BIT20+0x00FEE }, - // Programming cycle delay for AB and BIF clock gating - // Enabling AB and BIF Clock Gating - // Enabling AB Int_Arbiter Enhancement - // Enabling Requester ID - {ABCFG,SB_AB_REG10054, 0x00FFFFFF , 0x010407FF }, - {ABCFG,SB_AB_REG98 , 0xFFFF00FF , 0x00014700 }, // Enable the requestor ID for upstream traffic ABCFG 0x98[16]=1 -// {ABCFG,SB_AB_REG54 , 0x00FF0000 , 0x01040000 }, - {ABCFG,SB_AB_REG54 , 0x00FF0000 , 0x00040000 }, - - {ABCFG,0,0,-1}, // This dummy entry is to clear ab index - {-1, -1, -1, -1 }, -}; - - -// AB-Link Configuration Table -ABTBLENTRY abTblForA15[]={ - - //SMI Reordering fix - {ABCFG, SB_AB_REG90 ,BIT21 , BIT21 }, - {ABCFG, SB_AB_REG9C ,BIT15+BIT9+BIT5 ,BIT15+BIT9+BIT5}, - - //Posted pass NP Downstream feature - {AX_INDXC, SB_AB_REG02, BIT9 ,BIT9 }, - {ABCFG, SB_AB_REG9C, BIT14+BIT13+BIT12+BIT11+BIT10+BIT7+BIT6 , BIT14+BIT13+BIT12+BIT11+BIT10+BIT7+BIT6}, - {ABCFG, SB_AB_REG1009C, BIT5+BIT4 , BIT5+BIT4}, - - //Posted pass NP upstream feature - {ABCFG, SB_AB_REG58, BIT15+BIT14+BIT13+BIT12+BIT11, BIT15+BIT14+BIT13+BIT11}, - - //64 bit Non-posted memory write support - {AX_INDXC, SB_AB_REG02, BIT10 ,BIT10 }, - - {ABCFG, SB_AB_REG10090, BIT12+BIT11+BIT10+BIT9 , BIT12+BIT11+BIT10+BIT9}, - - {ABCFG,0,0,-1}, // This dummy entry is to clear ab index - {-1, -1, -1, -1 }, -}; - - -// abLinkInitBeforePciEnum - Set ABCFG registers -void abLinkInitBeforePciEnum(AMDSBCFG* pConfig){ - ABTBLENTRY *pAbTblPtr; - - // disable PMIO decoding when AB is set - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG64, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT2, 0); - - pAbTblPtr = (ABTBLENTRY *)FIXUP_PTR(&abTblEntry600[0]); - abcfgTbl(pAbTblPtr); - - if (getRevisionID() > SB700_A11){ - //Enable OHCI Prefetch - writeAlink( (SB_AB_REG80 | (ABCFG << 30)), (readAlink((SB_AB_REG80 | (ABCFG << 30)))) | BIT0); - //Register bit to maintain correct ordering of SMI and IO write completion - writeAlink( (SB_AB_REG8C | (ABCFG << 30)), (readAlink((SB_AB_REG8C | (ABCFG << 30)))) | BIT8); - } - - if (getRevisionID() >= SB700_A14){ - //Enable fix for TT SB01345 - writeAlink( (SB_AB_REG90 | (ABCFG << 30)), (readAlink((SB_AB_REG90 | (ABCFG << 30)))) | BIT17); - //Disable IO Write and SMI ordering enhancement - writeAlink( (SB_AB_REG9C | (ABCFG << 30)), (readAlink((SB_AB_REG9C | (ABCFG << 30)))) & (0xFFFFFEFF)); - } - - if (getRevisionID() >= SB700_A15) { - pAbTblPtr = (ABTBLENTRY *)FIXUP_PTR(&abTblForA15[0]); - abcfgTbl(pAbTblPtr); - } - - - // enable pmio decoding after ab is configured - // or BYTE PTR es:[ebp+SMBUS_BUS_DEV_FUN shl 12 + SB_SMBUS_REG64], BIT2 - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG64, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT2, BIT2); -} - - -void abcfgTbl(ABTBLENTRY* pABTbl){ - UINT32 ddValue; - - while ((pABTbl->regType) != 0xFF){ - TRACE((DMSG_SB_TRACE, "RegType: %X, RegNumber:%X, AndMask=%X, OrMask=%X \n",pABTbl->regType , pABTbl->regIndex, pABTbl->regMask, pABTbl->regData)); - if (pABTbl->regType > AX_INDXP){ - ddValue = pABTbl->regIndex | (pABTbl->regType << 30); - writeAlink(ddValue, ((readAlink(ddValue)) & (0xFFFFFFFF^(pABTbl->regMask)))|pABTbl->regData); - } - else{ - ddValue = 0x30 | (pABTbl->regType << 30); - writeAlink(ddValue, pABTbl->regIndex); - ddValue = 0x34 | (pABTbl->regType << 30); - writeAlink(ddValue, ((readAlink(ddValue)) & (0xFFFFFFFF^(pABTbl->regMask)))|pABTbl->regData); - } - ++pABTbl; - } - - //Clear ALink Access Index - ddValue = 0; - WriteIO(ALINK_ACCESS_INDEX, AccWidthUint32 | S3_SAVE, &ddValue); - TRACE((DMSG_SB_TRACE, "Exiting abcfgTbl\n")); -} - - -// programSubSystemIDs - Config Subsystem ID for all SB devices. -void programSubSystemIDs(AMDSBCFG* pConfig, BUILDPARAM *pStaticOptions){ - UINT32 ddTempVar; - UINT16 dwDeviceId; - - RWPCI((USB1_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->Ohci0Ssid); - RWPCI((USB1_OHCI1_BUS_DEV_FUN << 16) + SB_OHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->Ohci1Ssid); - RWPCI((USB2_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->Ohci2Ssid); - RWPCI((USB2_OHCI1_BUS_DEV_FUN << 16) + SB_OHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->Ohci3Ssid); - RWPCI((USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->Ohci4Ssid); - - RWPCI((USB1_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->Ehci0Ssid); - RWPCI((USB2_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->Ehci1Ssid); - - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->SmbusSsid); - RWPCI((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->IdeSsid); - RWPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->LpcSsid); - RWPCI((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->AzaliaSsid); - - ddTempVar = pStaticOptions->SataIDESsid; - if ( ((pConfig->SataClass) == AHCI_MODE) || ((pConfig->SataClass)== IDE_TO_AHCI_MODE) ) - ddTempVar = pStaticOptions->SataAHCISsid; - - ReadPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, &dwDeviceId); - if ((pConfig->SataClass) == RAID_MODE){ - ddTempVar = pStaticOptions->SataRAIDSsid; - if (dwDeviceId==SB750_SATA_DEFAULT_DEVICE_ID) - ddTempVar = pStaticOptions->SataRAID5Ssid; - } - - if ( ((pConfig->SataClass) == AMD_AHCI_MODE) || ((pConfig->SataClass) == IDE_TO_AMD_AHCI_MODE) ) { - ddTempVar = pStaticOptions->SataAHCISsid; - } - RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG2C, AccWidthUint32 | S3_SAVE, 0x00, ddTempVar); -} - -void commonInitLateBoot(AMDSBCFG* pConfig){ - UINT8 dbValue; - UINT32 ddVar; - - // We need to do the following setting in late post also because some bios core pci enumeration changes these values - // programmed during early post. - // RPR 4.5 Master Latency Timer - // Master Latency Timer PCIB_PCI_config 0x0D/0x1B = 0x40 - // Enables the PCIB to retain ownership of the bus on the - // Primary side and on the Secondary side when GNT# is deasserted. - //mov BYTE PTR es:[ebp+SBP2P_BUS_DEV_FUN shl 12 + SB_P2P_REG0D], 40h - //mov BYTE PTR es:[ebp+SBP2P_BUS_DEV_FUN shl 12 + SB_P2P_REG1B], 40h - dbValue = 0x40; - WritePCI((SBP2P_BUS_DEV_FUN << 16) + SB_P2P_REG0D, AccWidthUint8, &dbValue); - WritePCI((SBP2P_BUS_DEV_FUN << 16) + SB_P2P_REG1B, AccWidthUint8, &dbValue); - - //SB P2P AutoClock control settings. - ddVar = (pConfig->PcibAutoClkCtrlLow) | (pConfig->PcibAutoClkCtrlLow); - WritePCI((SBP2P_BUS_DEV_FUN << 16) + SB_P2P_REG4C, AccWidthUint32, &ddVar); - ddVar = (pConfig->PcibClkStopOverride); - RWPCI((SBP2P_BUS_DEV_FUN << 16) + SB_P2P_REG50, AccWidthUint16, 0x3F, (UINT16) (ddVar << 6)); - - if (pConfig->MobilePowerSavings){ - //If RTC clock is not driven to any chip, it should be shut-off. If system uses external RTC, then SB needs to - //drive out RTC clk to external RTC chip. If system uses internal RTC, then this clk can be shut off. - RWPMIO(SB_PMIO_REG68, AccWidthUint8, ~(UINT32)BIT4, (pConfig->ExternalRTCClock)<<4); - if (!getClockMode()){ - if (!(pConfig->UsbIntClock) ){ - //If the external clock is used, the second PLL should be shut down - RWPMIO(SB_PMIO_REGD0, AccWidthUint8, 0xFF, BIT0); - // If external clock mode is used, the 25Mhz oscillator buffer can be turned-off by setting PMIO 0xD4[7]=1 - RWPMIO(SB_PMIO_REGD4, AccWidthUint8, 0xFF, BIT7); - //Disable unused clocks - RWPMIO(SB_PMIO_REGCA, AccWidthUint8, 0xFF, 0x7E); - } - } - writeAlink(0x30, SB_AB_REG40); - writeAlink(0x34, ((readAlink(0x34)) & 0xFFFF0000) | 0x008A); - - } - else{ - //Don't shutoff RTC clock - RWPMIO(SB_PMIO_REG68, AccWidthUint8, ~(UINT32)BIT4, 0); - //Dont disable second PLL - RWPMIO(SB_PMIO_REGD0, AccWidthUint8, ~(UINT32)BIT0, 0); - //Enable the 25Mhz oscillator - RWPMIO(SB_PMIO_REGD4, AccWidthUint8, ~(UINT32)BIT7, 0); - RWPMIO(SB_PMIO_REGCA, AccWidthUint8, 0xFF, 0x00); - } -} - - -void -hpetInit (AMDSBCFG* pConfig, BUILDPARAM *pStaticOptions) -{ - DESCRIPTION_HEADER* pHpetTable; - - if (pConfig->HpetTimer == 1) { - UINT8 dbTemp; - - RWPMIO(SB_PMIO_REG9A, AccWidthUint8, 0xFF, BIT7); - // Program the HPET BAR address - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGB4, AccWidthUint32 | S3_SAVE, 0, pStaticOptions->HpetBase); - - // Enable HPET MMIO decoding: SMBUS:0x43[4] = 1 - // Enable HPET MSI support only when HpetMsiDis == 0 - dbTemp = (pConfig->HpetMsiDis)? BIT4 : BIT7 + BIT6 + BIT5 + BIT4; - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG43, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT3, dbTemp); - // Program HPET default clock period - if (getRevisionID() >= SB700_A13) { - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG34, AccWidthUint32 | S3_SAVE, 0x00, 0x429B17E); - } - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG43, AccWidthUint8 | S3_SAVE, 0xFF, BIT3); - // Enable High Precision Event Timer (also called Multimedia Timer) interrupt - RWPCI((SMBUS_BUS_DEV_FUN << 16) + (SB_SMBUS_REG64+1), AccWidthUint8 | S3_SAVE, ~(UINT32)BIT2, BIT2); - } - else { - if (!(pConfig->S3Resume)) { -// pHpetTable = (DESCRIPTION_HEADER*)ACPI_LocateTable('TEPH'); - pHpetTable = (DESCRIPTION_HEADER*)ACPI_LocateTable(Int32FromChar ('T', 'E', 'P', 'H')); - if (pHpetTable != NULL) { -// pHpetTable->Signature = 'HPET'; - pHpetTable->Signature = Int32FromChar ('T', 'E', 'P', 'H'); - } - } - } -} - - -void c3PopupSetting(AMDSBCFG* pConfig){ - UINT8 dbTemp; - CPUID_DATA CpuId; - - CpuidRead (0x01, &CpuId); - //RPR 2.3 C-State and VID/FID Change - dbTemp = GetNumberOfCpuCores(); - if (dbTemp > 1){ - //PM_IO 0x9A[5]=1, For system with dual core CPU, set this bit to 1 to automatically clear BM_STS when the C3 state is being initiated. - //PM_IO 0x9A[4]=1, For system with dual core CPU, set this bit to 1 and BM_STS will cause C3 to wakeup regardless of BM_RLD - //PM_IO 0x9A[2]=1, Enable pop-up for C3. For internal bus mastering or BmReq# from the NB, the SB will de-assert - //LDTSTP# (pop-up) to allow DMA traffic, then assert LDTSTP# again after some idle time. - RWPMIO(SB_PMIO_REG9A, AccWidthUint8, 0xFF, BIT5+BIT4+BIT2); - } - - //SB700 needs to changed for RD790 support - //PM_IO 0x8F [4] = 0 for system with RS690 - //Note: RS690 north bridge has AllowLdtStop built for both display and PCIE traffic to wake up the HT link. - //BmReq# needs to be ignored otherwise may cause LDTSTP# not to toggle. - //PM_IO 0x8F[5]=1, Ignore BM_STS_SET message from NB - RWPMIO(SB_PMIO_REG8F, AccWidthUint8, ~(UINT32)(BIT5+BIT4), BIT5); - - //LdtStartTime = 10h for minimum LDTSTP# de-assertion duration of 16us in StutterMode. This is to guarantee that - //the HT link has been safely reconnected before it can be disconnected again. If C3 pop-up is enabled, the 16us also - //serves as the minimum idle time before LDTSTP# can be asserted again. This allows DMA to finish before the HT - //link is disconnected. - //Increase LDTSTOP Deassertion time for SP5100 to 20us, SB700 remains the same - dbTemp = (IsServer())? 0x14 : 0x10; - RWPMIO(SB_PMIO_REG88, AccWidthUint8, 0x00, dbTemp); - - //This setting provides 16us delay before the assertion of LDTSTOP# when C3 is entered. The - //delay will allow USB DMA to go on in a continous manner - RWPMIO(SB_PMIO_REG89, AccWidthUint8, 0x00, 0x10); - - //Set this bit to allow pop-up request being latched during the minimum LDTSTP# assertion time - RWPMIO(SB_PMIO_REG52, AccWidthUint8, 0xFF, BIT7); - -} - diff --git a/src/vendorcode/amd/cimx/sb700/SBCMNLIB.c b/src/vendorcode/amd/cimx/sb700/SBCMNLIB.c deleted file mode 100644 index 130dbc4..0000000 --- a/src/vendorcode/amd/cimx/sb700/SBCMNLIB.c +++ /dev/null @@ -1,108 +0,0 @@ -/***************************************************************************** - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - ***************************************************************************/ - - -#include "Platform.h" - -UINT8 isEcPresent(){ - UINT8 dbFlag; - UINT16 dwVar0; - - //Read the EC configuration register base address from LPCCfg_A4[15:1] - //Write 0x5A to the EC config index register to unlock the access - //Write 0x20 to the EC config index register to select the device ID register - //Read the value of device ID register from the EC config data register - //If the value read is 0xB7, then EC is enabled. - //Write 0xA5 to re-lock the EC config index register if EC is enabled. - - ReadPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwVar0); - dwVar0 &= 0xFFFE; - RWIO(dwVar0, AccWidthUint8, 0, 0x5A); - RWIO(dwVar0, AccWidthUint8, 0, 0x20); - ReadIO(dwVar0+1, AccWidthUint8, &dbFlag); - RWIO(dwVar0, AccWidthUint8, 0, 0xA5); - - return ( dbFlag == 0xB7); -} - -void -getSbInformation ( -SB_INFORMATION *sbInfo){ - UINT16 dwDevId; - UINT8 dbRev; - - ReadPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG02, AccWidthUint16 | S3_SAVE, &dwDevId); - ReadPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG08, AccWidthUint8 | S3_SAVE, &dbRev); - sbInfo->sbModelMask = SB_MODEL_UNKNOWN; - if ( (dwDevId == SB7XX_DEVICE_ID) && (dbRev <= SB_Rev_Sb7xx_A14) ){ - sbInfo->sbModelMask |= SB_MODEL_SB700; - sbInfo->sbModelMask |= SB_MODEL_SR5690; - sbInfo->sbRev = dbRev; - ReadPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG9C, AccWidthUint8 | S3_SAVE, &dbRev); - if (dbRev & 01) - sbInfo->sbModelMask |= SB_MODEL_SB750; - if (isEcPresent()) - sbInfo->sbModelMask |= SB_MODEL_SB710; - return; - } -} - - -SB_CAPABILITY_SETTING -getSbCapability ( -SB_CAPABILITY_ITEM sbCapabilityItem -) -{ - SB_CAPABILITY_SETTING sbCapSetting=SB_UNKNOWN; - UINT32 ddTemp0; - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG43, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT3, 00); - ReadPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG10, AccWidthUint32, &ddTemp0); - - if (sbCapabilityItem < Sb_Unknown_Capability) - sbCapSetting = ((ddTemp0 >> (sbCapabilityItem << 1) ) & 0x03); - - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG43, AccWidthUint8 | S3_SAVE, 0xFF, BIT3); - return sbCapSetting; -} - - -void -setSbCapability ( -SB_CAPABILITY_ITEM sbCapabilityItem, SB_CAPABILITY_SETTING sbCapSetting -) -{ - UINT32 ddTemp0; - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG43, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT3, 00); - ReadPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG10, AccWidthUint32, &ddTemp0); - if ( (sbCapabilityItem < Sb_Unknown_Capability) & (sbCapSetting < Sb_Cap_Setting_Unknown) ) - ddTemp0 = (ddTemp0 & ~(0x03 << (sbCapabilityItem << 1))) | ( (sbCapSetting & 0x03) << (sbCapabilityItem << 1)); - WritePCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG10, AccWidthUint32, &ddTemp0); - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG43, AccWidthUint8 | S3_SAVE, 0xFF, BIT3); -} diff --git a/src/vendorcode/amd/cimx/sb700/SBCMNLIB.h b/src/vendorcode/amd/cimx/sb700/SBCMNLIB.h deleted file mode 100644 index e737bc9..0000000 --- a/src/vendorcode/amd/cimx/sb700/SBCMNLIB.h +++ /dev/null @@ -1,89 +0,0 @@ -/*;******************************************************************************** -; -; Copyright (C) 2012 Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;*********************************************************************************/ - -#ifndef _AMD_SBLIB_H_ -#define _AMD_SBLIB_H_ - -//SB7xx Family -#define SB7xx_DEVICE_ID 0x4385 -#define SB700 0x00 -#define SB750 0x01 -#define SB710 0x02 - -//SB800 Family -#define SB800 0x10 - -#define SB_UNKNOWN 0xFF - -//SB700 Revision IDs -#define SB700_A11 0x39 -#define SB700_A12 0x3A -#define SB700_A13 0x3B -#define SB700_A14 0x3C - -#define SB_Rev_Sb7xx_A11 0x39 -#define SB_Rev_Sb7xx_A12 0x3A -#define SB_Rev_Sb7xx_A13 0x3B -#define SB_Rev_Sb7xx_A14 0x3C - - -typedef enum { - Sb_Raid0_1_Capability, /// - Sb_Raid5_Capability, /// - Sb_Ahci_Capability, /// - Sb_Unknown_Capability -} SB_CAPABILITY_ITEM; - - -typedef enum { - Sb_Cap_Setting_Auto, - Sb_Cap_Setting_Enabled, - Sb_Cap_Setting_Disabled, - Sb_Cap_Setting_Unknown -} SB_CAPABILITY_SETTING; - - -#define SB_MODEL_SB700 BIT0 -#define SB_MODEL_SB750 BIT1 -#define SB_MODEL_SB710 BIT2 -#define SB_MODEL_SR5690 BIT3 -#define SB_MODEL_UNKNOWN BIT31 - -typedef struct -{ - UINT32 sbModelMask; - UINT8 sbRev; -}SB_INFORMATION; - - -void getSbInformation (SB_INFORMATION *sbInfo); -SB_CAPABILITY_SETTING getSbCapability (SB_CAPABILITY_ITEM sbCapabilityItem); -void setSbCapability (SB_CAPABILITY_ITEM sbCapabilityItem, SB_CAPABILITY_SETTING sbCapSetting); - -#endif //#ifndef _AMD_SBLIB_H_ diff --git a/src/vendorcode/amd/cimx/sb700/SBDEF.h b/src/vendorcode/amd/cimx/sb700/SBDEF.h deleted file mode 100644 index 01fc1b5..0000000 --- a/src/vendorcode/amd/cimx/sb700/SBDEF.h +++ /dev/null @@ -1,166 +0,0 @@ -/*;******************************************************************************** -; -; Copyright (C) 2012 Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;*********************************************************************************/ - -#ifndef _AMD_SBDEF_H_ -#define _AMD_SBDEF_H_ - -//AMD Library Routines - -UINT64 -MsrRead ( - IN UINT32 MsrAddress - ); - -VOID -MsrWrite ( - IN UINT32 MsrAddress, - IN UINT64 Value - ); - -void ReadIO(UINT16 Address, UINT8 OpFlag, void *Value); -void WriteIO(UINT16 Address, UINT8 OpFlag, void *Value); -void ReadPCI(UINT32 Address, UINT8 OpFlag, void *Value); -void WritePCI(UINT32 Address,UINT8 OpFlag, void *Value); -void RWPCI(UINT32 Address,UINT8 OpFlag,UINT32 Mask,UINT32 Data); -void ReadIndexPCI32(UINT32 PciAddress,UINT32 IndexAddress,void* Value); -void WriteIndexPCI32(UINT32 PciAddress,UINT32 IndexAddress,UINT8 OpFlag,void* Value); -void RWIndexPCI32(UINT32 PciAddress,UINT32 IndexAddress,UINT8 OpFlag,UINT32 Mask,UINT32 Data); -void RWIO (UINT16 Address, UINT8 OpFlag, UINT32 Mask, UINT32 Data); -void ReadMEM(UINT32 Address,UINT8 OpFlag, void* Value); -void WriteMEM(UINT32 Address,UINT8 OpFlag, void* Value); -void RWMEM(UINT32 Address,UINT8 OpFlag,UINT32 Mask,UINT32 Data); -UINT32 IsFamily10(void); -UINT64 ReadMSR(UINT32 Address); -void WriteMSR(UINT32 Address,UINT64 Value); -void RWMSR(UINT32 Address, UINT64 Mask, UINT64 Value); -void* LocateImage(UINT32 Signature); -void* CheckImage( UINT32 Signature, void* ImagePtr); -void Stall(UINT32 uSec); -void Reset(void); -CIM_STATUS RWSMBUSBlock(UINT8 Controller, UINT8 Address, UINT8 Offset, UINT8 BufferSize, UINT8* BufferPrt); -void InitSerialOut(void); -void ReadPMIO(UINT8 Address, UINT8 OpFlag, void* Value); -void WritePMIO(UINT8 Address, UINT8 OpFlag, void* Value); -void RWPMIO(UINT8 Address, UINT8 OpFlag, UINT32 AndMask, UINT32 OrMask); -void ReadPMIO2(UINT8 Address, UINT8 OpFlag, void* Value); -void WritePMIO2(UINT8 Address, UINT8 OpFlag, void* Value); -void RWPMIO2(UINT8 Address, UINT8 OpFlag, UINT32 AndMask, UINT32 OrMask); -void outPort80(UINT32 pcode); -UINT8 GetNumberOfCpuCores(void); -UINT8 ReadNumberOfCpuCores(void); -UINT8 GetByteSum(void* pData, UINT32 Length); -UINT32 readAlink(UINT32 Index); -void writeAlink(UINT32 Index,UINT32 Data); - -//---------------------------------------------------------------------------------------------- -//---------------------------------------------------------------------------------------------- -void azaliaInitAfterPciEnum (AMDSBCFG* pConfig); - -void SendBytePort(UINT8 Data); -void SendStringPort(char* pstr); -void ItoA(UINT32 Value,int Radix,char* pstr); -AMDSBCFG* getConfigPointer(void); -void saveConfigPointer(AMDSBCFG* pConfig); - - -UINT32 GetFixUp(void); - -void sataInitAfterPciEnum(AMDSBCFG* pConfig); -void sataInitBeforePciEnum(AMDSBCFG* pConfig); -void sataInitLatePost(AMDSBCFG* pConfig); -void sataDriveDetection(AMDSBCFG* pConfig, UINT32 ddBar5); -void sataPhyWorkaround(AMDSBCFG* pConfig, UINT32 ddBar5); -void forceOOB(UINT32 ddBar5); -void shutdownUnconnectedSataPortClock(AMDSBCFG* pConfig, UINT32 ddBar5); -void restrictSataCapabilities(AMDSBCFG* pConfig); - - -void commonInitEarlyBoot(AMDSBCFG* pConfig); -void commonInitEarlyPost(AMDSBCFG* pConfig); -void setRevisionID(void); -UINT8 getRevisionID(void); -UINT8 IsServer (void); -UINT8 IsLs2Mode (void); -void abLinkInitBeforePciEnum(AMDSBCFG* pConfig); -void abcfgTbl(ABTBLENTRY* pABTbl); -void programSubSystemIDs(AMDSBCFG* pConfig, BUILDPARAM *pStaticOptions); -void commonInitLateBoot(AMDSBCFG* pConfig); -void hpetInit(AMDSBCFG* pConfig, BUILDPARAM *pStaticOptions); -void c3PopupSetting(AMDSBCFG* pConfig); - -void sbBeforePciInit (AMDSBCFG* pConfig); -void sbAfterPciInit(AMDSBCFG* pConfig); -void sbLatePost(AMDSBCFG* pConfig); -void sbBeforePciRestoreInit(AMDSBCFG* pConfig); -void sbAfterPciRestoreInit(AMDSBCFG* pConfig); -void sbSmmAcpiOn(AMDSBCFG* pConfig); -UINT32 GetPciebase(void); -UINT32 CallBackToOEM(UINT32 Func, UINTN Data,AMDSBCFG* pConfig); -void sbSmmService(AMDSBCFG* pConfig); -void softwareSMIservice(void); - -void sbPowerOnInit (AMDSBCFG *pConfig); -void programPciByteTable(REG8MASK* pPciByteTable, UINT16 dwTableSize); -void programPmioByteTable(REG8MASK* pPmioByteTable, UINT16 dwTableSize); -UINT8 getClockMode(void); -UINT16 readStrapStatus (void); - -void usbInitBeforePciEnum(AMDSBCFG* pConfig); -void usbInitAfterPciInit(AMDSBCFG* pConfig); -void usbInitMidPost(AMDSBCFG* pConfig); -void programOhciMmioForEmulation(void); - -void fcInitBeforePciEnum(AMDSBCFG* pConfig); - -unsigned char ReadIo8 (IN unsigned short Address); -unsigned short ReadIo16 (IN unsigned short Address); -unsigned int ReadIo32 (IN unsigned short Address); -void WriteIo8 (IN unsigned short Address, IN unsigned char Data); -void WriteIo16 (IN unsigned short Address, IN unsigned short Data); -void WriteIo32 (IN unsigned short Address, IN unsigned int Data); -unsigned long long ReadTSC (void); -void CpuidRead (IN unsigned int Func, IN OUT CPUID_DATA* Data); - -#ifndef NO_EC_SUPPORT -void EnterEcConfig(void); -void ExitEcConfig(void); -void ReadEC8(UINT8 Address, UINT8* Value); -void WriteEC8(UINT8 Address, UINT8* Value); -void RWEC8(UINT8 Address, UINT8 AndMask, UINT8 OrMask); -void ecPowerOnInit(BUILDPARAM *pBuildOptPtr, AMDSBCFG *pConfig); -void ecInitBeforePciEnum(AMDSBCFG* pConfig); -void ecInitLatePost(AMDSBCFG* pConfig); -#endif -UINT8 isEcPresent(void); - -void DispatcherEntry(void *pConfig); -AGESA_STATUS AmdSbDispatcher(void *pConfig); -void AMDFamily15CpuLdtStopReq(void); - -#endif //#ifndef _AMD_SBDEF_H_ diff --git a/src/vendorcode/amd/cimx/sb700/SBMAIN.c b/src/vendorcode/amd/cimx/sb700/SBMAIN.c deleted file mode 100644 index 7468eb2..0000000 --- a/src/vendorcode/amd/cimx/sb700/SBMAIN.c +++ /dev/null @@ -1,289 +0,0 @@ -/***************************************************************************** - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - ***************************************************************************/ - - -#include "Platform.h" - -#ifndef B1_IMAGE - -BUILDPARAM DfltStaticOptions={ - BIOS_SIZE, // BIOS Size - LEGACY_FREE, // Legacy Free Option - 0x00, // Dummy space holder - - 0x00, // ECKbd disable/enable - 0x00, // EcChannel0 disable/enable - 0x00, // Dummy space holder1 - - SMBUS0_BASE_ADDRESS, // Smbus Base Address; - SMBUS1_BASE_ADDRESS, // Smbus Base Address; - SIO_PME_BASE_ADDRESS, // SIO PME Base Address - WATCHDOG_TIMER_BASE_ADDRESS, // Watchdog Timer Base Address - SPI_BASE_ADDRESS, - - PM1_EVT_BLK_ADDRESS, // AcpiPm1EvtBlkAddr; - PM1_CNT_BLK_ADDRESS, // AcpiPm1CntBlkAddr; - PM1_TMR_BLK_ADDRESS, // AcpiPmTmrBlkAddr; - CPU_CNT_BLK_ADDRESS, // CpuControlBlkAddr; - GPE0_BLK_ADDRESS, // AcpiGpe0BlkAddr; - SMI_CMD_PORT, // SmiCmdPortAddr; - ACPI_PMA_CNT_BLK_ADDRESS, // AcpiPmaCntBlkAddr; - - EC_LDN5_MAILBOX_ADDRESS, - EC_LDN5_IRQ, - EC_LDN9_MAILBOX_ADDRESS, // EC LDN9 Mailbox address - RESERVED_VALUE, - RESERVED_VALUE, - RESERVED_VALUE, - RESERVED_VALUE, - - HPET_BASE_ADDRESS, // HPET Base address - - SATA_IDE_MODE_SSID, - SATA_RAID_MODE_SSID, - SATA_RAID5_MODE_SSID, - SATA_AHCI_SSID, - - OHCI0_SSID, - OHCI1_SSID, - EHCI0_SSID, - OHCI2_SSID, - OHCI3_SSID, - EHCI1_SSID, - OHCI4_SSID, - SMBUS_SSID, - IDE_SSID, - AZALIA_SSID, - LPC_SSID, - P2P_SSID, -}; - - -/********************************************************************************* -* -* Routine Description: Config SB Before PCI INIT -* -* Arguments: -* -* pConfig - SBconfiguration -* -* Returns: -* -* void -* -**********************************************************************************/ -void sbBeforePciInit (AMDSBCFG* pConfig){ - BUILDPARAM *pStaticOptions; - - pStaticOptions = &pConfig->BuildParameters; - TRACE((DMSG_SB_TRACE, "CIMx - Entering sbBeforePciInit \n")); - commonInitEarlyBoot(pConfig); - commonInitEarlyPost(pConfig); -#ifndef NO_EC_SUPPORT - ecInitBeforePciEnum(pConfig); -#endif - usbInitBeforePciEnum(pConfig); // USB POST TIME Only - fcInitBeforePciEnum(pConfig); // Preinit flash controller - sataInitBeforePciEnum(pConfig); // Init SATA class code and PHY - programSubSystemIDs(pConfig, pStaticOptions); // Set subsystem/vendor ID - - TRACE((DMSG_SB_TRACE, "CIMx - Exiting sbBeforePciInit \n")); -} - - -/********************************************************************************* -* -* Routine Description: Config SB After PCI INIT -* -* Arguments: -* -* pConfig - SBconfiguration -* -* Returns: void -* -* Reference: atiSbAfterPciInit -* -**********************************************************************************/ -void sbAfterPciInit(AMDSBCFG* pConfig){ - BUILDPARAM *pStaticOptions; - - TRACE((DMSG_SB_TRACE, "CIMx - Entering sbAfterPciInit \n")); - - pStaticOptions = &pConfig->BuildParameters; - usbInitMidPost(pConfig); //usb initialization which is required only during post - usbInitAfterPciInit(pConfig); // Init USB MMIO - sataInitAfterPciEnum(pConfig); // SATA port enumeration - azaliaInitAfterPciEnum(pConfig); // Detect and configure High Definition Audio - - TRACE((DMSG_SB_TRACE, "CIMx - Exiting sbAfterPciInit \n")); -} - - -/********************************************************************************* -* -* Routine Description: Config SB during late POST -* -* Arguments: -* -* pConfig - SBconfiguration -* -* Returns: void -* -* Reference: atiSbLatePost -* -**********************************************************************************/ -void sbLatePost(AMDSBCFG* pConfig){ - UINT16 dwVar; - BUILDPARAM *pStaticOptions; - pStaticOptions = &pConfig->BuildParameters; - TRACE((DMSG_SB_TRACE, "CIMx - Entering sbLatePost \n")); - ReadPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG02, AccWidthUint16, &dwVar); - if (dwVar != SB7XX_DEVICE_ID){ - // Display message that the SB is wrong and stop the system - TRACE((DMSG_SB_TRACE, "Current system does not have SB700 chipset. Stopping\n")); - for(;;); - } - commonInitLateBoot(pConfig); - sataInitLatePost(pConfig); - hpetInit(pConfig, pStaticOptions); // SB Configure HPET base and enable bit -#ifndef NO_EC_SUPPORT - ecInitLatePost(pConfig); -#endif -} - -/********************************************************************************* -* -* Routine Description: Config SB before ACPI S3 resume PCI config device restore -* -* Arguments: -* -* pConfig - SBconfiguration -* -* Returns: void -* -* Reference: AtiSbBfPciRestore -* -**********************************************************************************/ -void sbBeforePciRestoreInit(AMDSBCFG* pConfig){ - BUILDPARAM *pStaticOptions; - - TRACE((DMSG_SB_TRACE, "CIMx - Entering sbBeforePciRestoreInit \n")); - - pConfig->S3Resume = 1; - - pStaticOptions = &pConfig->BuildParameters; - commonInitEarlyBoot(pConfig); // set /SMBUS/ACPI/IDE/LPC/PCIB - abLinkInitBeforePciEnum(pConfig); // Set ABCFG registers - usbInitBeforePciEnum(pConfig); // USB POST TIME Only - fcInitBeforePciEnum(pConfig); // Preinit flash controller - sataInitBeforePciEnum(pConfig); - programSubSystemIDs(pConfig, pStaticOptions); // Set subsystem/vendor ID -} - - -/********************************************************************************* -* -* Routine Description: Config SB after ACPI S3 resume PCI config device restore -* -* Arguments: -* -* pConfig - SBconfiguration -* -* Returns: void -* -* Reference: AtiSbAfPciRestore -* -**********************************************************************************/ -void sbAfterPciRestoreInit(AMDSBCFG* pConfig){ - BUILDPARAM *pStaticOptions; - - pConfig->S3Resume = 1; - - pStaticOptions = &pConfig->BuildParameters; - TRACE((DMSG_SB_TRACE, "CIMx - Entering sbAfterPciRestoreInit \n")); - - commonInitLateBoot(pConfig); - sataInitAfterPciEnum(pConfig); - azaliaInitAfterPciEnum(pConfig); // Detect and configure High Definition Audio - hpetInit(pConfig, pStaticOptions); // SB Configure HPET base and enable bit - sataInitLatePost(pConfig); - sbSmmAcpiOn(pConfig); -} - - -/*++ - -Routine Description: - - SB config hook during ACPI_ON - -Arguments: - - pConfig - SBconfiguration - -Returns: - - void - ---*/ - -void sbSmmAcpiOn(AMDSBCFG* pConfig){ - UINT32 ddBar5; - UINT8 dbPort; - - //RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG60+2, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT1+BIT0), 0); - if (getRevisionID() >= SB700_A13) - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG43, AccWidthUint8 | S3_SAVE, 0xFF, BIT0); //Enable Legacy DMA prefetch enhancement - - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG60+2, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT1+BIT0), 0); - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG64+3, AccWidthUint8| S3_SAVE, ~(UINT32)BIT7, 0); - programOhciMmioForEmulation(); - - // For IDE_TO_AHCI_MODE and IDE_TO_AMD_AHCI_MODE, clear Interrupt Status register for all ports - ReadPCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG24), AccWidthUint32, &ddBar5); - if ((pConfig->SataClass == IDE_TO_AHCI_MODE) || (pConfig->SataClass == IDE_TO_AMD_AHCI_MODE)){ - for (dbPort = 0; dbPort <= 5; dbPort++) { - RWMEM(ddBar5 + SB_SATA_BAR5_REG110 + dbPort * 0x80, AccWidthUint32, 0x00, 0xFFFFFFFF); - } - } -} - - -UINT32 CallBackToOEM(UINT32 Func, UINTN Data,AMDSBCFG* pConfig){ - UINT32 Result=0; - TRACE((DMSG_SB_TRACE,"OEM Call Back Func [%x] Data [%x]\n",Func,Data)); - if (pConfig->StdHeader.pCallBack==NULL) - return Result; - Result = (*(pConfig->StdHeader.pCallBack))(Func,Data,pConfig); - TRACE((DMSG_SB_TRACE,"SB Hook Status [%x]\n",Result)); - return Result; -} - -#endif diff --git a/src/vendorcode/amd/cimx/sb700/SBPort.c b/src/vendorcode/amd/cimx/sb700/SBPort.c deleted file mode 100644 index 6c5740b..0000000 --- a/src/vendorcode/amd/cimx/sb700/SBPort.c +++ /dev/null @@ -1,441 +0,0 @@ -/***************************************************************************** - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - ***************************************************************************/ - - -#include "Platform.h" - -REG8MASK sbPorInitPciTable[] = { - // SMBUS Device(Bus 0, Dev 20, Func 0) - {0x00, SMBUS_BUS_DEV_FUN, 0}, - {SB_SMBUS_REGD0+2, 0x00, 0x01}, - {SB_SMBUS_REG40, 0x00, 0x44}, - {SB_SMBUS_REG40+1, 0xFF, 0xE9}, //Set smbus pci config 0x40[14]=1, This bit is used for internal bus flow control. - {SB_SMBUS_REG64, 0x00, 0xBF}, //SB_SMBUS_REG64[13]=1, delays back to back interrupts to the CPU - {SB_SMBUS_REG64+1, 0x00, 0x78}, - {SB_SMBUS_REG64+2, ~(UINT8)BIT6, 0x9E}, - {SB_SMBUS_REG64+3, 0x0F, 0x02}, - {SB_SMBUS_REG68+1, 0x00, 0x90}, - {SB_SMBUS_REG6C, 0x00, 0x20}, - {SB_SMBUS_REG78, 0x00, 0xFF}, - {SB_SMBUS_REG04, 0x00, 0x07}, - {SB_SMBUS_REG04+1, 0x00, 0x04}, - {SB_SMBUS_REGE1, 0x00, 0x99}, //RPR recommended setting, Sections "SMBUS Pci Config" & "IMC Access Control" - {SB_SMBUS_REGAC, ~(UINT8)BIT4, BIT1}, - {SB_SMBUS_REG60+2, ~(UINT8)(BIT1+BIT0) , 0x24}, // Disabling Legacy USB Fast SMI# Smbus_PCI_config 0x62 [5] = 1. Legacy USB - // can request SMI# to be sent out early before IO completion. - // Some applications may have problems with this feature. The BIOS should set this bit - // to 1 to disable the feature. Enabling Legacy Interrupt Smbus_PCI_Config 0x62[2]=1. - {0xFF, 0xFF, 0xFF}, - - // LPC Device(Bus 0, Dev 20, Func 3) - {0x00, LPC_BUS_DEV_FUN, 0}, - {SB_LPC_REG40, 0x00, 0x04}, - {SB_LPC_REG48, 0x00, 0x07}, - {SB_LPC_REG4A, 0x00, 0x20}, // Port Enable for IO Port 80h. - {SB_LPC_REG78, ~(UINT8)BIT0, 0x00}, - {SB_LPC_REG7C, 0x00, 0x05}, - {SB_LPC_REGB8+3, ~(UINT8)BIT0, BIT7+BIT6+BIT5+BIT3+BIT0}, //RPR recommended setting,Section "IO / Mem Decoding" & "SPI bus" - {0xFF, 0xFF, 0xFF}, - - // P2P Bridge(Bus 0, Dev 20, Func 4) - {0x00, SBP2P_BUS_DEV_FUN, 0}, - {SB_P2P_REG40, 0x00, 0x26}, // Enabling PCI-bridge subtractive decoding & PCI Bus 64-byte DMA Read Access - {SB_P2P_REG4B, 0xFF, BIT6+BIT7+BIT4}, - {SB_P2P_REG1C, 0x00, 0x11}, - {SB_P2P_REG1D, 0x00, 0x11}, - {SB_P2P_REG04, 0x00, 0x21}, - {SB_P2P_REG50, 0x02, 0x01}, // PCI Bridge upstream dual address window - {0xFF, 0xFF, 0xFF}, -}; - - -REG8MASK sbA13PorInitPciTable[] = { - // SMBUS Device(Bus 0, Dev 20, Func 0) - {0x00, SMBUS_BUS_DEV_FUN, 0}, - {SB_SMBUS_REG43, ~(UINT8)BIT3, 0x00}, //Make some hidden registers of smbus visible. - {SB_SMBUS_REG38, (UINT8)~BIT7, 00}, - {SB_SMBUS_REGAC+1, ~(UINT8)BIT5, 0}, //Enable SATA test/enhancement mode - {SB_SMBUS_REG43, 0xFF, BIT3}, //Make some hidden registers of smbus invisible. - {0xFF, 0xFF, 0xFF}, -}; - - -REG8MASK sbA14PorInitPciTable[] = { - // LPC Device(Bus 0, Dev 20, Func 3) - {0x00, LPC_BUS_DEV_FUN, 0}, - {SB_LPC_REG8C+2, ~(UINT8)BIT1, 00}, - {0xFF, 0xFF, 0xFF}, -}; - -REG8MASK sbPorPmioInitTbl[] = { - // index andmask ormask - {SB_PMIO_REG67, 0xFF, 0x02}, - {SB_PMIO_REG37, 0xFF, 0x04}, // Configure pciepme as rising edge - {SB_PMIO_REG50, 0x00, 0xE0}, // Enable CPU_STP (except S5) & PCI_STP - {SB_PMIO_REG60, 0xFF, 0x20}, // Enable Speaker - {SB_PMIO_REG65, (UINT8)~(BIT4+BIT7), 0x00},// Clear PM_IO 0x65[4] UsbResetByPciRstEnable to avoid S3 reset to reset USB - {SB_PMIO_REG55, ~(UINT8)BIT6, 0x07}, // Select CIR wake event to ACPI.GEVENT[23] & Clear BIT6 SoftPciRst for safety - {SB_PMIO_REG66, 0xFF, BIT5}, // Configure keyboard reset to generate pci reset - {SB_PMIO_REGB2, 0xFF, BIT7}, - {SB_PMIO_REG0E, 0xFF, BIT3}, // Enable ACPI IO decoding - {SB_PMIO_REGD7, 0xF6, 0x80}, - {SB_PMIO_REG7C, 0xFF, BIT4}, // enable RTC AltCentury register - - {SB_PMIO_REG75, 0xC0, 0x05}, // PME_TURN_OFF_MSG during ASF shutdown - {SB_PMIO_REG52, 0xC0, 0x08}, - - {SB_PMIO_REG8B, 0x00, 0x10}, - {SB_PMIO_REG69, 0xF9, 0x01 << 1}, // [Updated RPR] Set default WDT resolution to 10ms -}; - -REG8MASK sbA13PorPmioInitTbl[]={ - // index andmask ormask - {SB_PMIO_REGD7, 0xFF, BIT5+BIT0}, //Fixes for TT SB00068 & SB01054 (BIT5 & BIT0 correspondingly) - {SB_PMIO_REGBB, (UINT8)~BIT7, BIT6+BIT5}, //Fixes for TT SB00866 & SB00696 (BIT6 & BIT5 correspondingly) - // Always clear [7] to begin with SP5100 C1e disabled - -// {SB_PMIO_REG65, 0xFF, BIT7}, -// {SB_PMIO_REG75, 0xC0, 0x01}, // PME_TURN_OFF_MSG during ASF shutdown -// {SB_PMIO_REG52, 0xC0, 0x02}, - -}; - - -void sbPowerOnInit (AMDSBCFG *pConfig){ - UINT8 dbVar0, dbVar1, dbValue; - UINT16 dwTempVar; - BUILDPARAM *pBuildOptPtr; - - TRACE((DMSG_SB_TRACE, "CIMx - Entering sbPowerOnInit \n")); - - setRevisionID(); - ReadPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, &dwTempVar); - if (dwTempVar == SB750_SATA_DEFAULT_DEVICE_ID) - RWPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG9C, AccWidthUint8 | S3_SAVE, 0xFF, 0x01); - - // Set A-Link bridge access address. This address is set at device 14h, function 0, - // register 0f0h. This is an I/O address. The I/O address must be on 16-byte boundry. - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGF0, AccWidthUint32, 00, ALINK_ACCESS_INDEX); - - writeAlink(0x80000004, 0x04); // RPR 3.3 Enabling upstream DMA Access - writeAlink(0x30, 0x10); //AXINDC 0x10[9]=1, Enabling Non-Posted memory write for K8 platform. - writeAlink(0x34, readAlink(0x34) | BIT9); - - if (!(pConfig->ResetCpuOnSyncFlood)){ - //Enable reset on sync flood - writeAlink( (UINT32)( ((UINT32)SB_AB_REG10050) | ((UINT32)ABCFG << 30)), - (UINT32)( readAlink((((UINT32)SB_AB_REG10050) | ((UINT32)ABCFG << 30))) | ((UINT32)BIT2) )); - } - - pBuildOptPtr = &(pConfig->BuildParameters); - - WritePCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG90, AccWidthUint32 | S3_SAVE, &(pBuildOptPtr->Smbus0BaseAddress) ); - - dwTempVar = pBuildOptPtr->Smbus1BaseAddress & (UINT16)~BIT0; - if( dwTempVar != 0 ){ - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG58, AccWidthUint16 | S3_SAVE, 00, (dwTempVar|BIT0)); - // Disable ASF Slave controller on SB700 rev A15. - if (getRevisionID() == SB700_A15) { - RWIO((dwTempVar+0x0D), AccWidthUint8, (UINT8)~BIT6, BIT6); - } - } - - WritePCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG64, AccWidthUint16 | S3_SAVE, &(pBuildOptPtr->SioPmeBaseAddress)); - RWPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA0, AccWidthUint32 | S3_SAVE, 0x001F,(pBuildOptPtr->SpiRomBaseAddress)); - - WritePMIO(SB_PMIO_REG20, AccWidthUint16, &(pBuildOptPtr->AcpiPm1EvtBlkAddr)); - WritePMIO(SB_PMIO_REG22, AccWidthUint16, &(pBuildOptPtr->AcpiPm1CntBlkAddr)); - WritePMIO(SB_PMIO_REG24, AccWidthUint16, &(pBuildOptPtr->AcpiPmTmrBlkAddr)); - WritePMIO(SB_PMIO_REG26, AccWidthUint16, &(pBuildOptPtr->CpuControlBlkAddr)); - WritePMIO(SB_PMIO_REG28, AccWidthUint16, &(pBuildOptPtr->AcpiGpe0BlkAddr)); - WritePMIO(SB_PMIO_REG2A, AccWidthUint16, &(pBuildOptPtr->SmiCmdPortAddr)); - WritePMIO(SB_PMIO_REG2C, AccWidthUint16, &(pBuildOptPtr->AcpiPmaCntBlkAddr)); - RWPMIO(SB_PMIO_REG2E, AccWidthUint16, 0x00,(pBuildOptPtr->SmiCmdPortAddr)+8); - WritePMIO(SB_PMIO_REG6C, AccWidthUint32, &(pBuildOptPtr->WatchDogTimerBase)); - - //Program power on pci init table - programPciByteTable( (REG8MASK*)FIXUP_PTR(&sbPorInitPciTable[0]), sizeof(sbPorInitPciTable)/sizeof(REG8MASK) ); - //Program power on pmio init table - programPmioByteTable( (REG8MASK *)FIXUP_PTR(&sbPorPmioInitTbl[0]), (sizeof(sbPorPmioInitTbl)/sizeof(REG8MASK)) ); - - dbValue = 0x00; - ReadIO (SB_IOMAP_REGC14, AccWidthUint8, &dbValue); - dbValue &= 0xF3; - WriteIO (SB_IOMAP_REGC14, AccWidthUint8, &dbValue); - - dbValue = 0x0A; - WriteIO (SB_IOMAP_REG70, AccWidthUint8, &dbValue); - ReadIO (SB_IOMAP_REG71, AccWidthUint8, &dbValue); - dbValue &= 0xEF; - WriteIO (SB_IOMAP_REG71, AccWidthUint8, &dbValue); - - - if (getRevisionID() >= SB700_A13){ - programPciByteTable( (REG8MASK*)FIXUP_PTR(&sbA13PorInitPciTable[0]), sizeof(sbA13PorInitPciTable)/sizeof(REG8MASK) ); - programPmioByteTable( (REG8MASK *)FIXUP_PTR(&sbA13PorPmioInitTbl[0]), (sizeof(sbA13PorPmioInitTbl)/sizeof(REG8MASK)) ); - } - - if ((getRevisionID() >= SB700_A14) ) - programPciByteTable( (REG8MASK*)FIXUP_PTR(&sbA14PorInitPciTable[0]), sizeof(sbA14PorInitPciTable)/sizeof(REG8MASK) ); - - if ( (getRevisionID() >= SB700_A14) && ( (pConfig->TimerClockSource == 1) || (pConfig->TimerClockSource == 2) )){ - ReadPMIO(SB_PMIO_REGD4, AccWidthUint8, &dbVar1); - if (!(dbVar1 & BIT6)){ - RWPMIO(SB_PMIO_REGD4, AccWidthUint8, 0xFF, BIT6); - pConfig->RebootRequired=1; - } - } - - if (getRevisionID() > SB700_A11) { - if (pConfig->PciClk5 == 1) - RWPMIO(SB_PMIO_REG41, AccWidthUint8, ~(UINT32)BIT1, BIT1); // Enabled PCICLK5 for A12 - } - - dbVar0 = (pBuildOptPtr->BiosSize + 1) & 7; - if (dbVar0 > 4) { - dbVar0 = 0; - } - //KZ [061811]-It's used wrong BIOS SIZE for Coreboot. RWPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG6C, AccWidthUint8 | S3_SAVE, 0x00, 0xF8 << dbVar0); - - if (pConfig->Spi33Mhz) - //spi reg0c[13:12] to 01h to run spi 33Mhz in system bios - RWMEM((pBuildOptPtr->SpiRomBaseAddress)+SB_SPI_MMIO_REG0C,AccWidthUint16 | S3_SAVE, ~(UINT32)(BIT13+BIT12), BIT12); - - //SB internal spread spectrum settings. A reboot is required if the spread spectrum settings have to be changed - //from the existing value. - ReadPMIO(SB_PMIO_REG42, AccWidthUint8, &dbVar0); - if (pConfig->SpreadSpectrum != (dbVar0 >> 7) ) - pConfig->RebootRequired = 1; - if (pConfig->SpreadSpectrum) - RWPMIO(SB_PMIO_REG42, AccWidthUint8, ~(UINT32)BIT7, BIT7); - else - RWPMIO(SB_PMIO_REG42, AccWidthUint8, ~(UINT32)BIT7, 0); - - if ( !(pConfig->S3Resume) ){ - //To detect whether internal clock chip is used, do the following procedure - //set PMIO_B2[7]=1, then read PMIO_B0[4]; if it is 1, we are strapped to CLKGEN mode. - //if it is 0, we are using clock chip on board. - RWPMIO(SB_PMIO_REGB2, AccWidthUint8, 0xFF, BIT7); - - //Do the following programming only for SB700-A11. - //1. Set PMIO_B2 [7]=1 and read B0 and B1 and save those values. - //2. Set PMIO_B2 [7]=0 - //3. Write the saved values from step 1, back to B0 and B1. - //4. Set PMIO_B2 [6]=1. - ReadPMIO(SB_PMIO_REGB0, AccWidthUint16, &dwTempVar); - if (getRevisionID() == SB700_A11){ - RWPMIO(SB_PMIO_REGB2, AccWidthUint8, ~(UINT32)BIT7, 00); - WritePMIO(SB_PMIO_REGB0, AccWidthUint16, &dwTempVar); - RWPMIO(SB_PMIO_REGB2, AccWidthUint8, 0xFF, BIT6); - } - - if (!(dwTempVar & BIT4)){ - RWPMIO(SB_PMIO_REGD0, AccWidthUint8, ~(UINT32)BIT0, 0); //Enable PLL2 - - //we are in external clock chip on the board - if (pConfig->UsbIntClock == CIMX_OPTION_ENABLED){ - //Configure usb clock to come from internal PLL - RWPMIO(SB_PMIO_REGD2, AccWidthUint8, 0xFF, BIT3); //Enable 48Mhz clock from PLL2 - RWPMIO(SB_PMIO_REGBD, AccWidthUint8, ~(UINT32)BIT4, BIT4); //Tell USB PHY to use internal 48Mhz clock from PLL2 - } - else{ - //Configure usb clock to come from external clock - RWPMIO(SB_PMIO_REGBD, AccWidthUint8, ~(UINT32)BIT4, 0); //Tell USB PHY to use external 48Mhz clock from PLL2 - RWPMIO(SB_PMIO_REGD2, AccWidthUint8, ~(UINT32)BIT3, 00); //Disable 48Mhz clock from PLL2 - } - } - else{ - //we are using internal clock chip on this board - if (pConfig->UsbIntClock == CIMX_OPTION_ENABLED){ - //Configure usb clock to come from internal PLL - RWPMIO(SB_PMIO_REGD2, AccWidthUint8, ~(UINT32)BIT3, 0); //Enable 48Mhz clock from PLL2 - RWPMIO(SB_PMIO_REGBD, AccWidthUint8, ~(UINT32)BIT4, BIT4); //Tell USB PHY to use internal 48Mhz clock from PLL2 - } - else{ - //Configure usb clock to come from external clock - RWPMIO(SB_PMIO_REGBD, AccWidthUint8, ~(UINT32)BIT4, 0); //Tell USB PHY to use external 48Mhz clock from PLL2 - RWPMIO(SB_PMIO_REGD2, AccWidthUint8, ~(UINT32)BIT3, BIT3); //Disable 48Mhz clock from PLL2 - } - } - - ReadPMIO(SB_PMIO_REG43, AccWidthUint8, &dbVar0); - RWPMIO(SB_PMIO_REG43, AccWidthUint8, ~(UINT32)(BIT6+BIT5+BIT0), (pConfig->UsbIntClock << 5)); - //Check whether our usb clock settings changed compared to previous boot, if yes then we need to reboot. - if ( (dbVar0 & BIT0) || ( (pConfig->UsbIntClock) != ((dbVar0 & (BIT6+BIT5)) >> 5)) ) pConfig->RebootRequired = 1; - } - - if (pBuildOptPtr->LegacyFree) //if LEGACY FREE system - RWPCI(((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG44), AccWidthUint32 | S3_SAVE, 00, 0x0003C000); - else - RWPCI(((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG44), AccWidthUint32 | S3_SAVE, 00, 0xFF03FFD5); - - if ( (getRevisionID() == SB700_A14) || (getRevisionID() == SB700_A13)){ - RWPMIO(SB_PMIO_REG65, AccWidthUint8, 0xFF, BIT7); - RWPMIO(SB_PMIO_REG75, AccWidthUint8, 0xC0, BIT0); - RWPMIO(SB_PMIO_REG52, AccWidthUint8, 0xC0, BIT1); - } - - if (getRevisionID() >= SB700_A15) { - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG40+3, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT3), 0); - //Enable unconditional shutdown fix in A15 - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG38+1, AccWidthUint8 | S3_SAVE, 0xFF, BIT4); - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG40+3, AccWidthUint8 | S3_SAVE, 0xFF, BIT3); - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG06+1, AccWidthUint8 | S3_SAVE, 0xFF, 0xD0); - } - - // [Updated RPR] Set ImcHostSmArbEn(SMBUS:0xE1[5]) only when IMC is enabled - if (isEcPresent()) { - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGE1, AccWidthUint8 | S3_SAVE, 0xFF, BIT5); - } - - //According to AMD Family 15h Models 00h-0fh processor BKDG section 2.12.8 LDTSTOP requirement - // to program VID/FID LDTSTP# duration selection register - AMDFamily15CpuLdtStopReq(); - -#ifndef NO_EC_SUPPORT - ecPowerOnInit(pBuildOptPtr, pConfig); -#endif -} - - -void setRevisionID(void){ - UINT8 dbVar0, dbVar1; - - ReadPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG08), AccWidthUint8, &dbVar0); - ReadPMIO(SB_PMIO_REG53, AccWidthUint8, &dbVar1); - if ( (dbVar0 == 0x39) && (dbVar1 & BIT6) && !(dbVar1 & BIT7)){ - RWPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG40), AccWidthUint8, ~(UINT32)BIT0, BIT0); - RWPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG08), AccWidthUint8, 00, SB700_A12); - RWPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG40), AccWidthUint8, ~(UINT32)BIT0, 00); - } - ReadPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG08), AccWidthUint8, &dbVar0); -} - - -UINT8 getRevisionID(void){ - UINT8 dbVar0; - - ReadPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG08), AccWidthUint8, &dbVar0); - return dbVar0; -} - - -void AMDFamily15CpuLdtStopReq(void) { - CPUID_DATA CpuId; - CPUID_DATA CpuId_Brand; - UINT8 dbVar0, dbVar1, dbVar2; - - //According to AMD Family 15h Models 00h-0fh processor BKDG section 2.12.8 LDTSTOP requirement - //to program VID/FID LDTSTP# duration selection register - //If any of the following system configuration properties are true LDTSTP# assertion time required by the processor is 10us: - // 1. Any link in the system operating at a Gen 1 Frequency. - // 2. Also for server platform (G34/C32) set PM_REG8A[6:4]=100b (16us) - - CpuidRead (0x01, &CpuId); - CpuidRead (0x80000001, &CpuId_Brand); //BrandID, to read socket type - if ((CpuId.REG_EAX & 0xFFFFFF00) == 0x00600F00) { - - //Program to Gen 3 default value - 001b - RWPMIO(SB_PMIO_REG8A, AccWidthUint8, 0x8F, 0x10); //set [6:4]=001b - - //Any link in the system operating at a Gen 1 Frequency. - //Check Link 0 - Link connected regsister - ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REG98), AccWidthUint8, &dbVar2); - dbVar2 = dbVar2 & 0x01; - - if(dbVar2 == 0x01) { - //Check Link 0 - Link Frequency Freq[4:0] - ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REG89), AccWidthUint8, &dbVar0); - ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REG9C), AccWidthUint8, &dbVar1); - dbVar0 = dbVar0 & 0x0F; //Freq[3:0] - dbVar1 = dbVar1 & 0x01; //Freq[4] - dbVar0 = (dbVar1 << 4) | dbVar0; //Freq[4:0] - //Value 6 or less indicate Gen1 - if(dbVar0 <= 0x6) { - RWPMIO(SB_PMIO_REG8A, AccWidthUint8, 0x8F, 0x40); //set [6:4]=100b - } - } - - //Check Link 1 - Link connected regsister - ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGB8), AccWidthUint8, &dbVar2); - dbVar2 = dbVar2 & 0x01; - if(dbVar2 == 0x01) { - //Check Link 1 - Link Frequency Freq[4:0] - ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGA9), AccWidthUint8, &dbVar0); - ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGBC), AccWidthUint8, &dbVar1); - dbVar0 = dbVar0 & 0x0F; //Freq[3:0] - dbVar1 = dbVar1 & 0x01; //Freq[4] - dbVar0 = (dbVar1 << 4) | dbVar0; //Freq[4:0] - //Value 6 or less indicate Gen1 - if(dbVar0 <= 0x6) { - RWPMIO(SB_PMIO_REG8A, AccWidthUint8, 0x8F, 0x40); //set [6:4]=100b - } - } - - //Check Link 2 - Link connected regsister - ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGD8), AccWidthUint8, &dbVar2); - dbVar2 = dbVar2 & 0x01; - if(dbVar2 == 0x01) { - //Check Link 2 - Link Frequency Freq[4:0] - ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGC9), AccWidthUint8, &dbVar0); - ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGDC), AccWidthUint8, &dbVar1); - dbVar0 = dbVar0 & 0x0F; //Freq[3:0] - dbVar1 = dbVar1 & 0x01; //Freq[4] - dbVar0 = (dbVar1 << 4) | dbVar0; //Freq[4:0] - //Value 6 or less indicate Gen1 - if(dbVar0 <= 0x6) { - RWPMIO(SB_PMIO_REG8A, AccWidthUint8, 0x8F, 0x40); //set [6:4]=100b - } - } - - //Check Link 3 - Link connected regsister - ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGF8), AccWidthUint8, &dbVar2); - dbVar2 = dbVar2 & 0x01; - if(dbVar2 == 0x01) { - //Check Link 3 - Link Frequency Freq[4:0] - ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGE9), AccWidthUint8, &dbVar0); - ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGFC), AccWidthUint8, &dbVar1); - dbVar0 = dbVar0 & 0x0F; //Freq[3:0] - dbVar1 = dbVar1 & 0x01; //Freq[4] - dbVar0 = ((dbVar1 << 4) | dbVar0); //Freq[4:0] - //Value 6 or less indicate Gen1 - if(dbVar0 <= 0x6) { - RWPMIO(SB_PMIO_REG8A, AccWidthUint8, 0x8F, 0x40); //set [6:4]=100b - } - } - - // Server platform (G34/C32) set PM_REG8A[6:4]=100b (16us) - if(((CpuId_Brand.REG_EBX & 0xF0000000) == 0x30000000) || ((CpuId_Brand.REG_EBX & 0xF0000000) == 0x50000000)) { - RWPMIO(SB_PMIO_REG8A, AccWidthUint8, 0x8F, 0x40); //set [6:4]=100b - } - } - -} - diff --git a/src/vendorcode/amd/cimx/sb700/SBTYPE.h b/src/vendorcode/amd/cimx/sb700/SBTYPE.h deleted file mode 100644 index faeae5d..0000000 --- a/src/vendorcode/amd/cimx/sb700/SBTYPE.h +++ /dev/null @@ -1,249 +0,0 @@ -/*;******************************************************************************** -; -; Copyright (C) 2012 Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;*********************************************************************************/ - -#ifndef _AMD_SBTYPE_H_ -#define _AMD_SBTYPE_H_ - -#pragma pack(push,1) - -typedef UINT32 (*CIM_HOOK_ENTRY)(UINT32 Param1, UINTN Param2, void* pConfig); -typedef void (*SMM_SERVICE_ROUTINE) (void); - -typedef struct _STDCFG{ - UINT32 pImageBase; - UINT32 pPcieBase; - UINT8 Func; - CIM_HOOK_ENTRY pCallBack; - UINT32 pB2ImageBase; -}STDCFG; //Size of stdcfg is 17 bytes - -typedef struct _BUILDPARAM -{ - UINT16 BiosSize:3; //0-1MB, 1-2MB, 2-4MB, 3-8MB, 7-512KB, all other values reserved - UINT16 LegacyFree:1; - UINT16 Dummy0:12; - - UINT16 EcKbd:1; - UINT16 EcChannel0:1; - UINT16 Dummy1:14; - - UINT32 Smbus0BaseAddress; - UINT16 Smbus1BaseAddress; - UINT32 SioPmeBaseAddress; - UINT32 WatchDogTimerBase; - UINT32 SpiRomBaseAddress; - - UINT16 AcpiPm1EvtBlkAddr; - UINT16 AcpiPm1CntBlkAddr; - UINT16 AcpiPmTmrBlkAddr; - UINT16 CpuControlBlkAddr; - UINT16 AcpiGpe0BlkAddr; - UINT16 SmiCmdPortAddr; - UINT16 AcpiPmaCntBlkAddr; - - UINT16 EcLdn5MailBoxAddr; - UINT8 EcLdn5Irq; - UINT16 EcLdn9MailBoxAddr; - UINT32 ReservedDword0; - UINT32 ReservedDword1; - UINT32 ReservedDword2; - UINT32 ReservedDword3; - - UINT32 HpetBase; //HPET Base address - - UINT32 SataIDESsid; - UINT32 SataRAIDSsid; - UINT32 SataRAID5Ssid; - UINT32 SataAHCISsid; - - UINT32 Ohci0Ssid; - UINT32 Ohci1Ssid; - UINT32 Ehci0Ssid; - UINT32 Ohci2Ssid; - UINT32 Ohci3Ssid; - UINT32 Ehci1Ssid; - UINT32 Ohci4Ssid; - UINT32 SmbusSsid; - UINT32 IdeSsid; - UINT32 AzaliaSsid; - UINT32 LpcSsid; - UINT32 P2PSsid; -}BUILDPARAM; - -typedef struct _CODECENTRY{ - UINT8 Nid; - UINT32 Byte40; -}CODECENTRY; - -typedef struct _CODECTBLLIST{ - UINT32 CodecID; - CODECENTRY* CodecTablePtr; -}CODECTBLLIST; - -typedef struct _AMDSBCFG -{ - STDCFG StdHeader; //offset 0:16 - 17 bytes - //UINT32 MsgXchgBiosCimx; //offset 17:20 - 4 bytes - UINT32 S3Resume:1; - UINT32 RebootRequired:1; - UINT32 Spi33Mhz:1; - UINT32 SpreadSpectrum:1; - UINT32 UsbIntClock:1; //0:Use external clock, 1:Use internal clock - UINT32 PciClk5:1; //0:disable, 1:enable - UINT32 TimerClockSource:2; //0:100Mhz PCIE Reference clock (same as SB700-A12, - //1: 14Mhz using 25M_48M_66M_OSC pin, 2: Auto (100Mhz for SB700-A12, 14Mhz - //using 25M_48m_66m_0SC pin for SB700-A14, SB710, SP5100 - UINT32 ResetCpuOnSyncFlood:1; //0:Reset CPU on Sync Flood, 1:Do not reset CPU on sync flood - UINT32 MsgXchgBiosCimxDummyBB:23; - - /** BuildParameters - The STATIC platform information for CIMx Module. */ - BUILDPARAM BuildParameters; - - //SATA Configuration - UINT32 SataController :1; //0, 0:disable 1:enable* //offset 25:28 - 4 bytes - UINT32 SataClass :3; //1, 0:IDE* 1:RAID 2:AHCI 3:Legacy IDE 4:IDE->AHCI 5:AMD_AHCI, 6:IDE->AMD_AHCI - UINT32 SataSmbus :1; //4, 0:disable 1:enable* - UINT32 SataAggrLinkPmCap:1; //5, 0:OFF 1:ON - UINT32 SataPortMultCap :1; //6, 0:OFF 1:ON - UINT32 SataReserved :2; //8:7, Reserved - UINT32 SataClkAutoOff :1; //9, AutoClockOff for IDE modes 0:Disabled, 1:Enabled - UINT32 SataIdeCombinedMode :1; //10, SataIDECombinedMode 0:Disabled, 1:Enabled - UINT32 SataIdeCombMdPriSecOpt:1; //11, Combined Mode, SATA as primary or secondary 0:primary 1:secondary - UINT32 SataReserved1 :6; //17:12, Not used currently - UINT32 SataEspPort :6; //23:18 SATA port is external accessiable on a signal only connector (eSATA:) - UINT32 SataClkAutoOffAhciMode:1; //24: Sata Auto clock off for AHCI mode - UINT32 SataHpcpButNonESP:6; //25:30 Hotplug capable but not e-sata port - UINT32 SataHideUnusedPort:1; //31, 0:Disabled 1:Enabled - - //Flash Configuration //offset 29:30 - 2 bytes - UINT16 FlashController :1; //0, 0:disable FC & enable IDE 1:enable FC & disable IDE - UINT16 FlashControllerMode:1; //1, 0:Flash behind SATA 1:Flash as standalone - UINT16 FlashHcCrc:1; //2, - UINT16 FlashErrorMode:1; //3 - UINT16 FlashNumOfBankMode:1; //4 - UINT16 FlashDummy:11; //5:15 - - //USB Configuration //offset 31:32 - 2 bytes - UINT16 Usb1Ohci0 :1; //0, 0:disable 1:enable* Bus 0 Dev 18 Func0 - UINT16 Usb1Ohci1 :1; //1, 0:disable 1:enable* Bus 0 Dev 18 Func1 - UINT16 Usb1Ehci :1; //2, 0:disable 1:enable* Bus 0 Dev 18 Func2 - UINT16 Usb2Ohci0 :1; //3, 0:disable 1:enable* Bus 0 Dev 19 Func0 - UINT16 Usb2Ohci1 :1; //4, 0:disable 1:enable* Bus 0 Dev 19 Func1 - UINT16 Usb2Ehci :1; //5, 0:disable 1:enable* Bus 0 Dev 19 Func2 - UINT16 Usb3Ohci :1; //6, 0:disable 1:enable* Bus 0 Dev 20 Func5 - UINT16 UsbOhciLegacyEmulation:1; //7, 0:Enabled, 1:Disabled - UINT16 UsbDummy :8; //8:15 - - //Azalia Configuration //offset 33:36 - 4 bytes - UINT32 AzaliaController:2; //0, 0:AUTO, 1:disable, 2:enable - UINT32 AzaliaPinCfg :1; //2, 0:disable, 1:enable - UINT32 AzaliaFrontPanel:2; //3, 0:AUTO, 1:disable, 2:enable - UINT32 FrontPanelDetected:1; //5, 0:Not detected, 1:detected - UINT32 AzaliaSdin0 :2; //6 - UINT32 AzaliaSdin1 :2; //8 - UINT32 AzaliaSdin2 :2; //10 - UINT32 AzaliaSdin3 :2; //12 - UINT32 AzaliaDummy :18; //14:31 - - CODECTBLLIST* pAzaliaOemCodecTablePtr; //offset 37:40 - 4 bytes - UINT32 pAzaliaOemFpCodecTableptr; //offset 41:44 - 4 bytes - - //Miscellaneous Configuration //offset 45:48 - 4 bytes - UINT32 MiscReserved0:1; //0 - UINT32 HpetTimer:1; //1, 0:disable 1:enable - UINT32 PciClks:5; //2:6, 0:disable, 1:enable - UINT32 MiscReserved1:3; //9:7, Reserved - UINT32 IdeController:1; //10, 0:Enable, 1:Disabled - UINT32 MobilePowerSavings:1; //11, 0:Disable, 1:Enable Power saving features especially for Mobile platform - UINT32 ExternalRTCClock:1; //12, 0:Don't Shut Off, 1:Shut Off, external RTC clock - UINT32 AcpiS1Supported:1; //13, 0:S1 not supported, 1:S1 supported - UINT32 AnyHT200MhzLink:1; //14, 0:No HT 200Mhz Link in platform, 1; There is 200MHz HT Link in platform - UINT32 WatchDogTimerEnable:1; //15, [0]: WDT disabled; 1: WDT enabled - UINT32 MTC1e:1; //16, Message Triggered C1e - 0:Disabled*, 1:Enabled - UINT32 HpetMsiDis:1; //17, HPET MSI - 0:Enable HPET MSI, 1:Disable - UINT32 EhciDataCacheDis:1; //18, 0:Date Cache Enabled, 1:Date Cache Disabled /** EHCI Async Data Cache Disable */ - UINT32 MiscDummy:13; - - UINT32 AsmAslInfoExchange0; //offset 49:52 - 4 bytes - UINT32 AsmAslInfoExchange1; //offset 53:56 - - //DebugOptions_1 //offset 57:60 - UINT32 FlashPinConfig :1; //0, 0:desktop mode 1:mobile mode - UINT32 UsbPhyPowerDown :1; //1 - UINT32 PcibClkStopOverride :10; //11:2 - UINT32 Debug1Reserved0:4; //15:11 - UINT32 AzaliaSnoop:1; //16 0:Disable, 1:Enable - UINT32 SataSscPscCap:1; //17, 0:Enable SSC/PSC capability, 1:Disable SSC/PSC capability - UINT32 SataPortMode:6; //23:18, 0: AUTO, 1:Force SATA port(6/5/4/3/2/1) to GEN1 - UINT32 SataPhyWorkaround:2; //25:24, 0:AUTO, 1:Enable, 2:Disable - UINT32 Gen1DeviceShutdownDuringPhyWrknd:2; //27:26, 0:AUTO, 1:YES, 2:NO - UINT32 OhciIsoOutPrefetchDis:1; //28, 0:Enable OHCI ISO OUT prefetch, 1:Disable - UINT32 Debug1Dummy:3; // - - //DebugOptions_2 - UINT32 PcibAutoClkCtrlLow:16; - UINT32 PcibAutoClkCtrlHigh:16; - - //TempMMIO - UINT32 TempMMIO:32; - -}AMDSBCFG; - -typedef struct _SMMSERVICESTRUC -{ - UINT8 enableRegNum; - UINT8 enableBit; - UINT8 statusRegNum; - UINT8 statusBit; - CHAR8 *debugMessage; - SMM_SERVICE_ROUTINE serviceRoutine; -}SMMSERVICESTRUC; - -typedef struct _ABTblEntry -{ - UINT8 regType; - UINT32 regIndex; - UINT32 regMask; - UINT32 regData; -}ABTBLENTRY; - -#define PCI_ADDRESS(bus,dev,func,reg) \ -(UINT32) ( (((UINT32)bus) << 24) + (((UINT32)dev) << 19) + (((UINT32)func) << 16) + ((UINT32)reg) ) - -typedef UINT32 CIM_STATUS; -#define CIM_SUCCESS 0x00000000 -#define CIM_ERROR 0x80000000 -#define CIM_UNSUPPORTED 0x80000001 - -#pragma pack(pop) - -#define CIMX_OPTION_DISABLED 0 -#define CIMX_OPTION_ENABLED 1 - -#endif // _AMD_SBTYPE_H_ diff --git a/src/vendorcode/amd/cimx/sb700/SMM.c b/src/vendorcode/amd/cimx/sb700/SMM.c deleted file mode 100644 index 0d752fb..0000000 --- a/src/vendorcode/amd/cimx/sb700/SMM.c +++ /dev/null @@ -1,91 +0,0 @@ -/***************************************************************************** - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - ***************************************************************************/ - - -#include "Platform.h" - -SMMSERVICESTRUC smmItemsTable[]={ - {SB_PMIO_REG0E, BIT2, SB_PMIO_REG0F, BIT2, (CHAR8 *)"Software SMI through SMI CMD port \n ", softwareSMIservice}, - {SB_PMIO_REG00, BIT4, SB_PMIO_REG01, BIT4, (CHAR8 *)"Software initiated SMI \n ", NULL}, - {SB_PMIO_REG02, 0xFF, SB_PMIO_REG05, 0xFF, (CHAR8 *)"SMI on IRQ15-8 \n ", NULL}, - {SB_PMIO_REG03, 0xFF, SB_PMIO_REG06, 0xFF, (CHAR8 *)"SMI on IRQ7-0 \n ", NULL}, - {SB_PMIO_REG04, 0xFF, SB_PMIO_REG07, 0xFF, (CHAR8 *)"SMI on legacy devices activity(Serial, FDD etc) \n ", NULL}, - {SB_PMIO_REG1C, 0xFF, SB_PMIO_REG1D, 0xFF, (CHAR8 *)"SMI on PIO 0123 \n ", NULL}, - {SB_PMIO_REGA8, 0x0F, SB_PMIO_REGA9, 0xFF, (CHAR8 *)"SMI on PIO 4567 \n ", NULL}, -}; - - -/*++ - -Routine Description: - - SB SMI service - -Arguments: - - pConfig - SBconfiguration - -Returns: - - void - ---*/ - -void sbSmmService(AMDSBCFG* pConfig){ - UINT8 i, dbEnableValue, dbStatusValue; - SMMSERVICESTRUC *pSmmItems; - SMM_SERVICE_ROUTINE serviceRoutine; - - pSmmItems = (SMMSERVICESTRUC *)FIXUP_PTR(&smmItemsTable[0]); - TRACE((DMSG_SB_TRACE, "CIMx - Entering SMM services \n")); - for (i = 1; i <= (sizeof(smmItemsTable)/sizeof(SMMSERVICESTRUC)); i++){ - dbEnableValue = pSmmItems->enableRegNum; - ReadPMIO(pSmmItems->enableRegNum, AccWidthUint8, &dbEnableValue); - ReadPMIO(pSmmItems->statusRegNum, AccWidthUint8, &dbStatusValue); - if ( (dbEnableValue & (pSmmItems->enableBit)) && (dbStatusValue & (pSmmItems->statusBit)) ){ - TRACE((DMSG_SB_TRACE, "\n \nSmi source is: %s \n", pSmmItems->debugMessage)); - TRACE((DMSG_SB_TRACE, "Enable Reg:%d Value:%d\n", pSmmItems->enableRegNum, dbEnableValue)); - TRACE((DMSG_SB_TRACE, "Status Reg:%d Value:%d\n\n", pSmmItems->statusRegNum, dbStatusValue)); - if ( (pSmmItems->serviceRoutine)!= NULL){ - serviceRoutine = (void *)FIXUP_PTR(pSmmItems->serviceRoutine); - serviceRoutine(); - } - } - } - TRACE((DMSG_SB_TRACE, "CIMx - Exiting SMM services \n")); -} - - -void softwareSMIservice(void){ - UINT16 dwSmiCmdPort, dwVar; - ReadPMIO(SB_PMIO_REG2A, AccWidthUint16, &dwSmiCmdPort); - ReadIO(dwSmiCmdPort, AccWidthUint16, &dwVar); - TRACE((DMSG_SB_TRACE, "SMI CMD Port Address: %X SMICMD Port value is %X \n", dwSmiCmdPort, dwVar)); -} diff --git a/src/vendorcode/amd/cimx/sb700/Sata.c b/src/vendorcode/amd/cimx/sb700/Sata.c new file mode 100644 index 0000000..d503239 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/Sata.c @@ -0,0 +1,453 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + +//Table for class code of SATA Controller in different modes +UINT32 sataIfCodeTable[] = { + 0x01018f00, //sata class ID of IDE + 0x01040000, //sata class ID of RAID + 0x01060100, //sata class ID of AHCI + 0x01018a00, //sata class ID of Legacy IDE + 0x01018f00, //sata class ID of IDE to AHCI mode + 0x01060100, //sata class ID of AMD-AHCI mode + 0x01018f00 //sata class ID of IDE to AMD-AHCI mode +}; + +//Table for device id of SATA Controller in different modes +UINT16 sataDeviceIDTable[] = { + 0x4390, //sata device ID of IDE + 0x4392, //sata device ID of RAID + 0x4391, //sata class ID of AHCI + 0x4390, //sata device ID of Legacy IDE + 0x4390, //sata device ID of IDE->AHCI mode + 0x4394, //sata device ID for AMD-AHCI mode + 0x4390 //sata device ID of IDE->AMDAHCI mode +}; + + +void sataInitBeforePciEnum(AMDSBCFG* pConfig){ + UINT32 ddValue, *tempptr; + UINT16 *pDeviceIdptr, dwDeviceId; + UINT8 dbValue, dbOrMask, dbAndMask; + + + dbAndMask=0; + dbOrMask=0; + // Enable/Disable Combined mode & do primary/secondary selections, enable/disable + if (pConfig->SataIdeCombinedMode == CIMX_OPTION_DISABLED) dbAndMask= BIT3; //Clear BIT3 + if (pConfig->SataIdeCombMdPriSecOpt == 1) dbOrMask = BIT4; //Set BIT4 + if (pConfig->SataSmbus == 0) dbOrMask = BIT1; + + RWPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGAD), AccWidthUint8 | S3_SAVE, ~(dbAndMask), dbOrMask); + + if (pConfig->SataController == 0){ + // SATA Controller Disabled & set Power Saving mode to disabled + RWPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGAD), AccWidthUint8 | S3_SAVE, ~(UINT32)BIT0, BIT1); + return; + } + + restrictSataCapabilities(pConfig); + + // Get the appropriate class code from the table and write it to PCI register 08h-0Bh + // Set the appropriate SATA class based on the input parameters + dbValue=pConfig->SataClass; + tempptr= (UINT32 *) FIXUP_PTR (&sataIfCodeTable[0]); + ddValue=tempptr[dbValue]; + + // BIT0: Enable write access to PCI header (reg 08h-0Bh) by setting SATA PCI register 40h, bit 0 + // BIT4:disable fast boot + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, 0xff, BIT4+BIT0); + + // Write the class code to SATA PCI register 08h-0Bh + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG08), AccWidthUint32 | S3_SAVE, 0, ddValue); + + if (pConfig->SataClass == LEGACY_IDE_MODE) //SATA = Legacy IDE + //Set PATA controller to native mode + RWPCI(((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG09), AccWidthUint8 | S3_SAVE, 0x00, 0x08F); + + //Change the appropriate device id + if (pConfig->SataClass == AMD_AHCI_MODE) { + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 3), AccWidthUint8 | S3_SAVE, 0xff, BIT0); + } + pDeviceIdptr= (UINT16 *) FIXUP_PTR (&sataDeviceIDTable[0]); + + ReadPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, &dwDeviceId); + if ( !((dwDeviceId==SB750_SATA_DEFAULT_DEVICE_ID) && (pConfig->SataClass == RAID_MODE)) ){ + //if not (SB750 & RAID mode), then program the device id + dwDeviceId=pDeviceIdptr[dbValue]; + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, 0, dwDeviceId); + } + + if (pConfig->AcpiS1Supported) + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG34), AccWidthUint8 | S3_SAVE, 00, 0x70);//Disable SATA PM & MSI capability + else + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG60+1), AccWidthUint8 | S3_SAVE, 00, 0x70);//Disable SATA MSI capability + + if (getRevisionID() >= SB700_A13){ + //Enable test/enhancement mode for A13 + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40+3), AccWidthUint8 | S3_SAVE, ~(UINT32)BIT5, 00); + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG48), AccWidthUint32 | S3_SAVE, ~(UINT32)(BIT24+BIT21), 0xBF80); + } + + if (getRevisionID() >= SB700_A14){ + //Fix for TT SB01352 - LED Stays On When ODD Attached To Slave Port In IDE Mode + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG48), AccWidthUint8 | S3_SAVE, 0xFF, BIT6); + } + + // Disable write access to PCI header + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, ~(UINT32)BIT0, 0); + + // RPR 6.5 SATA PHY Programming Sequence + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG86, AccWidthUint16 | S3_SAVE, 0x00, 0x2C00); + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG88, AccWidthUint32 | S3_SAVE, 0x00, 0x01B48016); + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG8C, AccWidthUint32 | S3_SAVE, 0x00, 0x01B48016); + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG90, AccWidthUint32 | S3_SAVE, 0x00, 0x01B48016); + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG94, AccWidthUint32 | S3_SAVE, 0x00, 0x01B48016); + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG98, AccWidthUint32 | S3_SAVE, 0x00, 0x01B48016); + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG9C, AccWidthUint32 | S3_SAVE, 0x00, 0x01B48016); + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REGA0, AccWidthUint32 | S3_SAVE, 0x00, 0xA07AA07A); + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REGA4, AccWidthUint32 | S3_SAVE, 0x00, 0xA07AA07A); + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REGA8, AccWidthUint32 | S3_SAVE, 0x00, 0xA07AA07A); + + CallBackToOEM(SATA_PHY_PROGRAMMING, NULL, pConfig); +} + +void sataInitAfterPciEnum(AMDSBCFG* pConfig){ + UINT32 ddAndMask=0, ddOrMask=0, ddBar5=0; + UINT8 dbVar, dbPortNum; + + if (pConfig->SataController == 0) return; //return if SATA controller is disabled. + + //Enable write access to pci header, pm capabilities + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, 0xFF, BIT0); + + //Disable AHCI enhancement function (RPR 7.2) + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8 | S3_SAVE, 0xFF, BIT7); + + restrictSataCapabilities(pConfig); + + ReadPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG24), AccWidthUint32, &ddBar5); + + if ( (ddBar5 == 0) || (ddBar5 == -1) ) { + //assign temporary BAR5 + if ( (pConfig->TempMMIO == 0) || (pConfig->TempMMIO == -1)) + ddBar5 = 0xFEC01000; + else + ddBar5=pConfig->TempMMIO; + + WritePCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG24), AccWidthUint32, &ddBar5); + } + + ReadPCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar); + RWPCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8,0xFF, 0x03); //memory and io access enable + + ddBar5 &= 0xFFFFFC00; //Clear Bits 9:0 + if (!pConfig->SataPortMultCap) + ddAndMask |= BIT12; + if (!pConfig->SataAggrLinkPmCap) + ddAndMask |= BIT11; + if (pConfig->SataSscPscCap) + ddOrMask |= BIT1; + + RWMEM((ddBar5 + SB_SATA_BAR5_REGFC),AccWidthUint32 | S3_SAVE, ~ddAndMask, ddOrMask); + + + //Clear HPCP and ESP by default + RWMEM((ddBar5 + SB_SATA_BAR5_REGF8),AccWidthUint32 | S3_SAVE, 0xFFFC0FC0, 0); + + if (pConfig->SataHpcpButNonESP !=0) { + RWMEM((ddBar5 + SB_SATA_BAR5_REGF8),AccWidthUint32 | S3_SAVE, 0xFFFFFFC0, pConfig->SataHpcpButNonESP); + } + + // SATA ESP port setting + // These config bits are set for SATA driver to identify which ports are external SATA ports and need to + // support hotplug. If a port is set as an external SATA port and need to support hotplug, then driver will + // not enable power management(HIPM & DIPM) for these ports. + if (pConfig->SataEspPort !=0) { + RWMEM((ddBar5 + SB_SATA_BAR5_REGFC),AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, BIT20); + RWMEM((ddBar5 + SB_SATA_BAR5_REGF8),AccWidthUint32 | S3_SAVE, ~(pConfig->SataEspPort), 0); + RWMEM((ddBar5 + SB_SATA_BAR5_REGF8),AccWidthUint32 | S3_SAVE, ~(UINT32)(BIT17+BIT16+BIT15+BIT14+BIT13+BIT12),(pConfig->SataEspPort << 12)); + } + + if ( ((pConfig->SataClass) != NATIVE_IDE_MODE) && ((pConfig->SataClass) != LEGACY_IDE_MODE) ) + RWPCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG50+2), AccWidthUint8, ~(UINT32)(BIT3+BIT2+BIT1), BIT2+BIT1); //set MSI to 8 messages + + if ( ((pConfig->SataClass) != NATIVE_IDE_MODE) && ((pConfig->SataClass) != LEGACY_IDE_MODE) && ((pConfig->SataIdeCombinedMode) == CIMX_OPTION_DISABLED) ){ + RWMEM((ddBar5 + SB_SATA_BAR5_REG00),AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT2+BIT1+BIT0), BIT2+BIT0); + RWMEM((ddBar5 + SB_SATA_BAR5_REG0C),AccWidthUint8 | S3_SAVE, 0xC0, 0x3F); + } + + for (dbPortNum=0;dbPortNum<=5;dbPortNum++){ + if (pConfig->SataPortMode & (1 << dbPortNum)){ + //downgrade to GEN1 + RWMEM(ddBar5+ SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0x0F, 0x10); + RWMEM(ddBar5+ SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0xFF, 0x01); + Stall(1000); + RWMEM(ddBar5+ SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0xFE, 0x00); + } + } + + //If this is not S3 resume and also if SATA set to one of IDE mode, then implement drive detection workaround. + if ( !(pConfig->S3Resume) && ( ((pConfig->SataClass) != AHCI_MODE) && ((pConfig->SataClass) != RAID_MODE) && ((pConfig->SataClass) != AMD_AHCI_MODE) ) ) + sataDriveDetection(pConfig, ddBar5); + + if ( (pConfig->SataPhyWorkaround==1) || ( (pConfig->SataPhyWorkaround==0) && (getRevisionID() < SB700_A13)) ) + sataPhyWorkaround(pConfig, ddBar5); + + // Set the handshake bit for IDE driver to detect the disabled IDE channel correctly. + // Set IDE PCI Config 0x63 [3] if primary channel disabled, [4] if secondary channel disabled. + if (pConfig->SataIdeCombinedMode == CIMX_OPTION_DISABLED) + RWPCI( ((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG63), AccWidthUint8 , 0xF9, (0x02 << (pConfig->SataIdeCombMdPriSecOpt)) ); + + WritePCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar); + + //Disable write access to pci header, pm capabilities + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, ~(UINT32)BIT0, 0); +} + + +void sataDriveDetection(AMDSBCFG* pConfig, UINT32 ddBar5){ + UINT32 ddVar0; + UINT8 dbPortNum, dbVar0; + UINT32 dwIoBase, dwVar0; + + TRACE((DMSG_SB_TRACE, "CIMx - Entering sata drive detection procedure\n\n")); + TRACE((DMSG_SB_TRACE, "SATA BAR5 is %X \n", ddBar5)); + + if ( (pConfig->SataClass == NATIVE_IDE_MODE) || (pConfig->SataClass == LEGACY_IDE_MODE) || (pConfig->SataClass == IDE_TO_AHCI_MODE) || (pConfig->SataClass == IDE_TO_AMD_AHCI_MODE) ){ + for (dbPortNum=0;dbPortNum<4;dbPortNum++){ + ReadMEM(ddBar5+ SB_SATA_BAR5_REG128 + dbPortNum * 0x80, AccWidthUint32, &ddVar0); + if ( ( ddVar0 & 0x0F ) == 0x03){ + if ( dbPortNum & BIT0) + //this port belongs to secondary channel + ReadPCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG18), AccWidthUint16, &dwIoBase); + else + //this port belongs to primary channel + ReadPCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG10), AccWidthUint16, &dwIoBase); + + //if legacy ide mode, then the bar registers don't contain the correct values. So we need to hardcode them + if (pConfig->SataClass == LEGACY_IDE_MODE) + dwIoBase = ( (0x170) | ( (~((dbPortNum & BIT0) << 7)) & 0x80 ) ); + + if ( dbPortNum & BIT1) + //this port is slave + dbVar0=0xB0; + else + //this port is master + dbVar0=0xA0; + dwIoBase &= 0xFFF8; + WriteIO(dwIoBase+6, AccWidthUint8, &dbVar0); + + //Wait in loop for 30s for the drive to become ready + for (dwVar0=0;dwVar0<3000;dwVar0++){ + ReadIO(dwIoBase+7, AccWidthUint8, &dbVar0); + if ( (dbVar0 & 0x88) == 0) + break; + Stall(10000); + } + } //end of if ( ( ddVar0 & 0x0F ) == 0x03) + } //for (dbPortNum=0;dbPortNum<4;dbPortNum++) + } //if ( (pConfig->SataClass == NATIVE_IDE_MODE) || (pConfig->SataClass == LEGACY_IDE_MODE) || (pConfig->SataClass == IDE_TO_AHCI_MODE) || (pConfig->SataClass == IDE_TO_AMD_AHCI_MODE) ) +} + + +//This patch is to workaround the SATA PHY logic hardware issue in the SB700. +//Internally this workaround is called as 7NewA +void sataPhyWorkaround(AMDSBCFG* pConfig, UINT32 ddBar5){ + + UINT8 dbPortNum, dbVar0; + + if (pConfig->Gen1DeviceShutdownDuringPhyWrknd == 0x01){ + for (dbPortNum=0;dbPortNum<=5;dbPortNum++){ + ReadMEM(ddBar5+ SB_SATA_BAR5_REG128 + dbPortNum * 0x80, AccWidthUint8, &dbVar0); + if ( (dbVar0 & 0xF0) == 0x10){ + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40+2, AccWidthUint8 | S3_SAVE, 0xFF, (01 << dbPortNum)); + } + + } + } + + RWPMIO(SB_PMIO_REGD0, AccWidthUint8, ~(UINT32)(BIT4+BIT3), BIT4+BIT3);//set PMIO_D0[4:3] = 11b // this is to tell SATA PHY to use the internal 100MHz clock + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG86, AccWidthUint8 | S3_SAVE, 0x00, 0x40);// set SATA PCI_CFG 0x86[7:0] = 0x40 //after the reset is done, perform this to turn on the diff clock path into SATA PHY + Stall(2000);// Wait for 2ms + RWPMIO(SB_PMIO_REGD0, AccWidthUint8, ~(UINT32)(BIT4+BIT3), 00);//13. set PMIO_D0[4:3] = 00b + Stall(20000);// Wait 20ms + forceOOB(ddBar5);// Force OOB + + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40+2, AccWidthUint8 | S3_SAVE, ~(0x03F), 00); +} + + +void forceOOB(UINT32 ddBar5){ + UINT8 dbPortNum; + for (dbPortNum=0;dbPortNum<=5;dbPortNum++) + RWMEM(ddBar5+ SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0xFF, 0x01); + Stall(2000); + for (dbPortNum=0;dbPortNum<=5;dbPortNum++) + RWMEM(ddBar5+ SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0xFE, 0x00); + Stall(2000);// Wait for 2ms +} + +/*++ + +Routine Description: + + SATA Late Configuration + + if the mode is selected as IDE->AHCI + { 1. Set class ID to AHCI + 2. Enable AHCI interrupt + } + +Arguments: + + pConfig - SBconfiguration + +Returns: + + void + +--*/ +void sataInitLatePost(AMDSBCFG* pConfig){ + UINT32 ddBar5; + UINT8 dbVar; + + //Return immediately is sata controller is not enabled + if (pConfig->SataController == 0) return; + + restrictSataCapabilities(pConfig); + + //Get BAR5 value + ReadPCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG24), AccWidthUint32, &ddBar5); + + //Assign temporary BAR if is not already assigned + if ( (ddBar5 == 0) || (ddBar5 == -1) ){ + //assign temporary BAR5 + if ( (pConfig->TempMMIO == 0) || (pConfig->TempMMIO == -1)) + ddBar5 = 0xFEC01000; + else + ddBar5=pConfig->TempMMIO; + WritePCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG24), AccWidthUint32, &ddBar5); + } + + ReadPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar); + //Enable memory and io access + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, 0xFF, 0x03); + //Enable write access to pci header, pm capabilities + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, 0xff, BIT0); + + shutdownUnconnectedSataPortClock(pConfig, ddBar5); + + if ( (pConfig->SataClass == IDE_TO_AHCI_MODE) || (pConfig->SataClass == IDE_TO_AMD_AHCI_MODE)){ + //program the AHCI class code + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG08), AccWidthUint32 | S3_SAVE, 0, 0x01060100); + //Set interrupt enable bit + RWMEM((ddBar5 + 0x04),AccWidthUint8,~(UINT32)0,BIT1); + //program the correct device id for AHCI mode + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, 0, 0x4391); + + if (pConfig->SataClass == IDE_TO_AMD_AHCI_MODE) + //program the correct device id for AMD-AHCI mode + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 3), AccWidthUint8 | S3_SAVE, 0xFF, BIT0); + } + + //Disable write access to pci header and pm capabilities + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, ~(UINT32)BIT0, 0); + //Clear error status + RWMEM((ddBar5 + SB_SATA_BAR5_REG130),AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); + RWMEM((ddBar5 + SB_SATA_BAR5_REG1B0),AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); + RWMEM((ddBar5 + SB_SATA_BAR5_REG230),AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); + RWMEM((ddBar5 + SB_SATA_BAR5_REG2B0),AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); + //Restore memory and io access bits + WritePCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar ); +} + + +void shutdownUnconnectedSataPortClock(AMDSBCFG* pConfig, UINT32 ddBar5){ + UINT8 dbPortNum, dbPortSataStatus, NumOfPorts=0; + UINT8 UnusedPortBitMap; + UINT8 SataType; + UINT8 ClockOffEnabled ; + + UnusedPortBitMap = 0; + + // First scan for all unused SATA ports + for (dbPortNum = 5; dbPortNum <= 5; dbPortNum--) { + ReadMEM (ddBar5 + SB_SATA_BAR5_REG128 + (dbPortNum * 0x80), AccWidthUint8, &dbPortSataStatus); + if ((!(dbPortSataStatus & 0x01)) && (!((pConfig->SataEspPort) & (1 << dbPortNum)))) { + UnusedPortBitMap |= (1 << dbPortNum); + } + } + + // Decide if we need to shutdown the clock for all unused ports + SataType = pConfig->SataClass; + ClockOffEnabled = (pConfig->SataClkAutoOff && ((SataType == NATIVE_IDE_MODE) || (SataType == LEGACY_IDE_MODE) || \ + (SataType == IDE_TO_AHCI_MODE) || (SataType == IDE_TO_AMD_AHCI_MODE))) || \ + (pConfig->SataClkAutoOffAhciMode && ((SataType == AHCI_MODE) || (SataType == AMD_AHCI_MODE))); + + if (ClockOffEnabled) { + //Shutdown the clock for the port and do the necessary port reporting changes. + TRACE((DMSG_SB_TRACE, "Shutting down clock for SATA ports %X \n", UnusedPortBitMap)); + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8, 0xFF, UnusedPortBitMap); + RWMEM(ddBar5 + SB_SATA_BAR5_REG0C, AccWidthUint8, ~UnusedPortBitMap, 00); + } + + // If all ports are in disabled state, report at least one + ReadMEM (ddBar5 + SB_SATA_BAR5_REG0C, AccWidthUint8, &dbPortSataStatus); + if ( (dbPortSataStatus & 0x3F) == 0) { + dbPortSataStatus = 1; + RWMEM (ddBar5 + SB_SATA_BAR5_REG0C, AccWidthUint8, ~(0x3F), dbPortSataStatus); + } + + // Decide if we need to hide unused ports from being seen by OS (this saves OS startup time) + if (pConfig->SataHideUnusedPort && ClockOffEnabled) { + dbPortSataStatus &= ~UnusedPortBitMap; // Mask off unused ports + for (dbPortNum = 0; dbPortNum <= 6; dbPortNum++) { + if (dbPortSataStatus & (1 << dbPortNum)) + NumOfPorts++; + } + if (NumOfPorts == 0 ) { + NumOfPorts = 0x01; + } + RWMEM (ddBar5 + SB_SATA_BAR5_REG00, AccWidthUint8, 0xE0, NumOfPorts - 1); + } +} + + +void restrictSataCapabilities(AMDSBCFG* pConfig){ + //Restrict capabilities + if ( ((getSbCapability(Sb_Raid0_1_Capability)== 0x02) && (pConfig->SataClass == RAID_MODE)) || \ + ((getSbCapability(Sb_Raid5_Capability)== 0x02) && (pConfig->SataClass == RAID_MODE)) || \ + ((getSbCapability(Sb_Ahci_Capability)== 0x02) && ((pConfig->SataClass == AHCI_MODE) || (pConfig->SataClass == IDE_TO_AHCI_MODE)))){ + pConfig->SataClass = NATIVE_IDE_MODE; + } +} diff --git a/src/vendorcode/amd/cimx/sb700/SbAmdLib.h b/src/vendorcode/amd/cimx/sb700/SbAmdLib.h new file mode 100644 index 0000000..e8f6b38 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/SbAmdLib.h @@ -0,0 +1,196 @@ +/*;******************************************************************************** +; +; Copyright (C) 2012 Advanced Micro Devices, Inc. +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; * Redistributions of source code must retain the above copyright +; notice, this list of conditions and the following disclaimer. +; * Redistributions in binary form must reproduce the above copyright +; notice, this list of conditions and the following disclaimer in the +; documentation and/or other materials provided with the distribution. +; * Neither the name of Advanced Micro Devices, Inc. nor the names of +; its contributors may be used to endorse or promote products derived +; from this software without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY +; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;*********************************************************************************/ + +#ifndef _AMD_AMDLIB_H_ +#define _AMD_AMDLIB_H_ + +typedef CHAR8 *va_list; +#ifndef _INTSIZEOF + #define _INTSIZEOF(n)( (sizeof(n) + sizeof(UINTN) - 1) & ~(sizeof(UINTN) - 1) ) +#endif + +// Also support coding convention rules for var arg macros +#ifndef va_start +#define va_start(ap,v) ( ap = (va_list)&(v) + _INTSIZEOF(v) ) +#endif +#define va_arg(ap,t) ( *(t *)((ap += _INTSIZEOF(t)) - _INTSIZEOF(t)) ) +#define va_end(ap) ( ap = (va_list)0 ) + +#ifndef CIMx_DEBUG + #define CIMx_DEBUG 0 +#endif + + +#pragma pack(push,1) + +#define IMAGE_ALIGN 32*1024 +#define NUM_IMAGE_LOCATION 32 + +//Entry Point Call +typedef void (*CIM_IMAGE_ENTRY)(void* pConfig); + +//Hook Call + +typedef struct _Reg8Mask +{ + UINT8 bRegIndex; + UINT8 bANDMask; + UINT8 bORMask; +}REG8MASK; + + +typedef struct _CIMFILEHEADER{ + UINT32 AtiLogo; + UINT32 EntryPoint; + UINT32 ModuleLogo; + UINT32 ImageSize; + UINT16 Version; + UINT8 CheckSum; + UINT8 Reserved1; + UINT32 Reserved2; +}CIMFILEHEADER; + +typedef struct _CPUID_DATA{ + UINT32 REG_EAX; + UINT32 REG_EBX; + UINT32 REG_ECX; + UINT32 REG_EDX; +}CPUID_DATA; + +#ifndef BIT0 + #define BIT0 (1 << 0) +#endif +#ifndef BIT1 + #define BIT1 (1 << 1) +#endif +#ifndef BIT2 + #define BIT2 (1 << 2) +#endif +#ifndef BIT3 + #define BIT3 (1 << 3) +#endif +#ifndef BIT4 + #define BIT4 (1 << 4) +#endif +#ifndef BIT5 + #define BIT5 (1 << 5) +#endif +#ifndef BIT6 + #define BIT6 (1 << 6) +#endif +#ifndef BIT7 + #define BIT7 (1 << 7) +#endif +#ifndef BIT8 + #define BIT8 (1 << 8) +#endif +#ifndef BIT9 + #define BIT9 (1 << 9) +#endif +#ifndef BIT10 + #define BIT10 (1 << 10) +#endif +#ifndef BIT11 + #define BIT11 (1 << 11) +#endif +#ifndef BIT12 + #define BIT12 (1 << 12) +#endif +#ifndef BIT13 + #define BIT13 (1 << 13) +#endif +#ifndef BIT14 + #define BIT14 (1 << 14) +#endif +#ifndef BIT15 + #define BIT15 (1 << 15) +#endif +#ifndef BIT16 + #define BIT16 (1 << 16) +#endif +#ifndef BIT17 + #define BIT17 (1 << 17) +#endif +#ifndef BIT18 + #define BIT18 (1 << 18) +#endif +#ifndef BIT19 + #define BIT19 (1 << 19) +#endif +#ifndef BIT20 + #define BIT20 (1 << 20) +#endif +#ifndef BIT21 + #define BIT21 (1 << 21) +#endif +#ifndef BIT22 + #define BIT22 (1 << 22) +#endif +#ifndef BIT23 + #define BIT23 (1 << 23) +#endif +#ifndef BIT24 + #define BIT24 (1 << 24) +#endif +#ifndef BIT25 + #define BIT25 (1 << 25) +#endif +#ifndef BIT26 + #define BIT26 (1 << 26) +#endif +#ifndef BIT27 + #define BIT27 (1 << 27) +#endif +#ifndef BIT28 + #define BIT28 (1 << 28) +#endif +#ifndef BIT29 + #define BIT29 (1 << 29) +#endif +#ifndef BIT30 + #define BIT30 (1 << 30) +#endif +#ifndef BIT31 + #define BIT31 (1 << 31) +#endif + +#define PCI_ADDRESS(bus,dev,func,reg) \ +(UINT32) ( (((UINT32)bus) << 24) + (((UINT32)dev) << 19) + (((UINT32)func) << 16) + ((UINT32)reg) ) + +#pragma pack(pop) + +typedef enum { + AccWidthUint8 = 0, + AccWidthUint16, + AccWidthUint32, +} ACC_WIDTH; + +#define S3_SAVE 0x80 + +#endif //#ifndef _AMD_AMDLIB_H_ diff --git a/src/vendorcode/amd/cimx/sb700/SbCmn.c b/src/vendorcode/amd/cimx/sb700/SbCmn.c new file mode 100644 index 0000000..7d5b4f4 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/SbCmn.c @@ -0,0 +1,572 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + + +REG8MASK sbEarlyPostByteInitTable[]={ + // SMBUS Device(Bus 0, Dev 20, Func 0) + {0x00, SMBUS_BUS_DEV_FUN, 0}, + {SB_SMBUS_REG43, ~(UINT8)BIT3, 0x00}, //Make BAR registers of smbus visible. + {SB_SMBUS_REG24, 0X00, (CIMx_Version & 0xFF)}, //Program the version information + {SB_SMBUS_REG24+1, 0x00, (CIMx_Version >> 8)}, + {SB_SMBUS_REG24+2, 0x00, RC_Information}, + {SB_SMBUS_REG24+3, 0x00, Additional_Changes_Indicator}, + {SB_SMBUS_REG43, ~(UINT8)BIT3, BIT3}, //Make BAR registers of smbus invisible. + {SB_SMBUS_REGAE, ~(UINT8)(BIT6 + BIT5), BIT6 + BIT5}, //Disable Timer IRQ enhancement for proper operation of the 8254 timer. + // [6] - IoApicPicArbEn, set 1 to enable arbiter between APIC and PIC interrupts + {SB_SMBUS_REGAD, ~(UINT8)(BIT0+BIT1+BIT2+BIT4), BIT0+BIT3}, // Initialize SATA to default values, SATA Enabled, + // Combined mode enabled, SATA as primary, power saving enable + {SB_SMBUS_REGAF, 0xE3, 6 << 2}, // Set SATA Interrupt to INTG# + {SB_SMBUS_REG68, BIT3, 0 }, // First disable all usb controllers and then enable then according to setup selection + {0xFF, 0xFF, 0xFF}, + + // IDE Device(Bus 0, Dev 20, Func 1) + {0x00, IDE_BUS_DEV_FUN, 0}, + {SB_IDE_REG62+1, ~(UINT8)BIT0, BIT5}, // Enabling IDE Explicit Pre-Fetch IDE PCI Config 0x62[8]=0 + // Allow MSI capability of IDE controller to be visible. IDE PCI Config 0x62[13]=1 + {0xFF, 0xFF, 0xFF}, + + // Azalia Device(Bus 0, Dev 20, Func 2) + {0x00, AZALIA_BUS_DEV_FUN, 0}, + {SB_AZ_REG4C, ~(UINT8)BIT0, BIT0}, + {0xFF, 0xFF, 0xFF}, + + // LPC Device(Bus 0, Dev 20, Func 3) + {0x00, LPC_BUS_DEV_FUN, 0}, + + {SB_LPC_REG40, ~(UINT8)BIT2, BIT2}, // Enabling LPC DMA Function 0x40[2] + {SB_LPC_REG78, ~(UINT8)BIT1, 00}, // Disables MSI capability + {0xFF, 0xFF, 0xFF}, + + // P2P Bridge(Bus 0, Dev 20, Func 4) + {0x00, SBP2P_BUS_DEV_FUN, 0}, + + {SB_P2P_REG64+1, 0xFF, BIT7+BIT6}, //Adjusting CLKRUN#, PCIB_PCI_Config 0x64[15]=01 + //Enabling arbiter fix, PCIB_PCI_Config 0x64[14]=01 + {SB_P2P_REG64+2, 0xFF, BIT4}, //Enabling One-Prefetch-Channel Mode, PCIB_PCI_config 0x64 [20] + + {SB_P2P_REG0D, 0x00, 0x40}, //Setting Latency Timers to 0x40, Enables the PCIB to retain ownership + {SB_P2P_REG1B, 0x00, 0x40}, // of the bus on the Primary side and on the Secondary side when GNT# is deasserted. + + {0xFF, 0xFF, 0xFF}, + + // SATA Device(Bus 0, Dev 17, Func 0) + {0x00, SATA_BUS_DEV_FUN, 0}, + {SB_SATA_REG44, 0xff, BIT0}, // Enables the SATA watchdog timer register prior to the SATA BIOS post + {SB_SATA_REG40+3, 0xff, BIT5}, // RPR setting: Disable the testing/enhancement mode SATA_PCI_config 0x40 [29] = 1 + {SB_SATA_REG48+2, 0xff, BIT5}, // RPR setting: Disable the testing/enhancement mode SATA_PCI_config 0x48 [24] = 1, [21] = 1 + {SB_SATA_REG48+3, 0xff, BIT0}, + {SB_SATA_REG44 + 2, 0, 0x10}, // Program watchdog timer with 16 retries before timer time-out. + {0xFF, 0xFF, 0xFF}, +}; + + +REG8MASK sbEarlyPostPmioInitTbl[]={ + // index andmask ormask + {SB_PMIO_REG55, ~(UINT8)(BIT3+BIT4+BIT5), BIT5+BIT3}, //BIT3(PcieNative)=1b, BIT4(Pcie_Wak_Mask)=0b, BIT5(Pcie_WAK_Sci)=1b + {SB_PMIO_REG01, 0xff, BIT1}, + {SB_PMIO_REG0E, 0xff, BIT2 + BIT3}, + {SB_PMIO_REG10, 0x3E, (BIT6+BIT5+BIT3+BIT1)}, // RTC_En_En + TMR_En_En + GLB_EN_EN and clear EOS_EN + PciExpWakeDisEn + {SB_PMIO_REG61, 0xFF, 0x40}, // USB Device Support to Wakeup System from S3/S4 state, USB PME & PCI Act from NB + {SB_PMIO_REG59, 0xFC, 0x00 }, // Clear the flash controller bits BIT1:0 + {SB_PMIO_REG01, 0xFF, 0x97 }, // Clear all the status + {SB_PMIO_REG05, 0xFF, 0xFF }, + {SB_PMIO_REG06, 0xFF, 0xFF }, + {SB_PMIO_REG07, 0xFF, 0xFF }, + {SB_PMIO_REG0F, 0xFF, 0x1F }, + {SB_PMIO_REG1D, 0xFF, 0xFF }, + {SB_PMIO_REG39, 0xFF, 0xFF }, + {SB_PMIO_REG7C, ~(UINT8)(BIT5+BIT3+BIT2), BIT3+BIT2}, //Turn on BLink LED + {SB_PMIO_REG67, 0xFF, 0x06}, // C State enable, must be set in order to exercise C state + {SB_PMIO_REG68, 0x38, 0x84}, + {SB_PMIO_REG8D, 0xFF, 0x01}, // Set PM_Reg_0x8D[0] to enable PmeTurnOff/PmeMsgAck handshake to fix PCIE LAN S3/S4 wake failure + {SB_PMIO_REG84, 0xFD, BIT3+BIT0}, + {SB_PMIO_REG53, 0xFF, BIT7+BIT6}, //ACPI System Clock setting, PMIO Reg 0x53[6]=1. Our reference clock + //is either 25 or 100Mhz and so the default acpi clock is actually + //running at 12.5Mhz and so the system time will run slow. We have + //generated another internal clock which runs at 14.318Mhz which is the + //correct frequency. We should set this bit to turn on this feature PMIO_REG53[6]=1 + //PCI Clock Period, PM_IO 0x53 [7] = 1. By setting this, PCI clock period + //increase to 30.8 ns. + {SB_PMIO_REG95, ~(UINT8)(BIT2+BIT1+BIT0), BIT2+BIT1}, //USB Advanced Sleep Control, Enables USB EHCI controller + //to sleep for 6 uframes in stead of the standard 10us to + //improve power saving. + {SB_PMIO_REGD7, 0xFF, BIT6+BIT1}, + +}; + + +// commonInitEarlyBoot - set /SMBUS/ACPI/IDE/LPC/PCIB. This settings should be done during S3 resume also +void commonInitEarlyBoot(AMDSBCFG* pConfig) { + UINT16 dwTempVar; + CPUID_DATA CpuId; + CPUID_DATA CpuId_Brand; + UINT8 dbValue; + UINT32 ddValue; + UINT8 Family, Model, Stepping; + + TRACE((DMSG_SB_TRACE, "CIMx - Entering commonInitEarlyBoot \n")); + CpuidRead (0x01, &CpuId); + CpuidRead (0x80000001, &CpuId_Brand); //BrandID + + //Early post initialization of pci config space + programPciByteTable( (REG8MASK*)FIXUP_PTR(&sbEarlyPostByteInitTable[0]), sizeof(sbEarlyPostByteInitTable)/sizeof(REG8MASK) ); + + // RPR 5.5 Clear PM_IO 0x65[4] UsbResetByPciRstEnable, Set this bit so that usb gets reset whenever there is PCIRST. + RWPMIO(SB_PMIO_REG65, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT4, BIT4); + + + #if 0 //KZ [083011]-It's used wrong BIOS SIZE for Coreboot. + //For being compatible with earlier revision, check whether ROM decoding is changed already outside CIMx before + //changing it. + ReadPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG68, AccWidthUint16 | S3_SAVE, &dwTempVar); + if ( (dwTempVar == 0x08) || (dwTempVar == 0x00)) + RWPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG68, AccWidthUint8 | S3_SAVE, 0, 0x0E);// Change the 1Mb below ROM decoding range to 0xE0000 to 0xFFFFF + #endif + + if (pConfig->AzaliaController == 1) + RWPMIO(SB_PMIO_REG59, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT3, 0); + else + RWPMIO(SB_PMIO_REG59, AccWidthUint8 | S3_SAVE, 0xFF, BIT3); + + //Disable or Enable PCI Clks based on input + RWPCI((SBP2P_BUS_DEV_FUN << 16) + SB_P2P_REG42, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT5+BIT4+BIT3+BIT2), ((pConfig->PciClks) & 0x0F) << 2 ); + RWPCI((SBP2P_BUS_DEV_FUN << 16) + SB_P2P_REG4A, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT1+BIT0), ((pConfig->PciClks) >> 4) | ((pConfig->PciClk5) << 1) ); + ReadPMIO(SB_PMIO_REG2C, AccWidthUint16, &dwTempVar); // Read Arbiter address, Arbiter address is in PMIO 2Ch + RWIO(dwTempVar, AccWidthUint8, 0, 0); // Write 0 to enable the arbiter + + abLinkInitBeforePciEnum(pConfig); // Set ABCFG registers + // Set LDTSTP# duration to 10us for HydraD CPU model 8, 9 or A; or when HT link is 200MHz; or Family15 Orochi CPU C32/G34 package + ddValue = CpuId.REG_EAX & 0x00FF00F0; + dbValue = 1; + + if((CpuId.REG_EAX & 0x00F00F00) == 0x00600F00) { + if(((CpuId_Brand.REG_EBX & 0xF0000000) == 0x30000000) || ((CpuId_Brand.REG_EBX & 0xF0000000) == 0x50000000)) { + //Orochi processor G34/C32, set to 10us + dbValue = 10; + } + else { + // Orochi processor AM3, set to 5us + dbValue = 5; + } + } + + if ((pConfig->AnyHT200MhzLink) || (ddValue == 0x100080) || (ddValue == 0x100090) || (ddValue == 0x1000A0)) { + //any kind of CPU run HT at 200Mhz , or HydraD CPU model 8, 9 or A, set to 10us + dbValue = 10; + } + + + RWPMIO(SB_PMIO_REG8B, AccWidthUint8 | S3_SAVE, 0x00, dbValue); + + // Enable/Disable watchdog timer + RWPMIO(SB_PMIO_REG69, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT0, (UINT8)(!pConfig->WatchDogTimerEnable)); + + // Per SB700/SP5100 RPR 2.5 + // + // Enable C1e stutter timer for any system with chip revision >= A14 + // Set SMBUS:0x5c[22:16] = 16 -- Set amount of idle time to 16ms + // + + if (getRevisionID() >= SB700_A14) { + dwTempVar = 0x0010; + + // Set PMIO:0xcb[5] = 1 -- AutoStutterTimerEn, set 1 to enable + // Set PMIO:0xcb[6] = 1 -- AutoStutterTimeSel, 1=1ms timer tick increment; 0=2us increment + RWPMIO(SB_PMIO_REGCB, AccWidthUint8 | S3_SAVE, 0xff, BIT6 + BIT5); + + Family = (UINT8)((CpuId.REG_EAX & 0x00ff0000)>> 16); + Model = (UINT8)((CpuId.REG_EAX & 0x000000f0)>> 4); + Stepping = (UINT8) (CpuId.REG_EAX & 0x0000000f); + + // For Server system (SP5100) with CPU type = Family 10h with LS2 mode enabled: + // Model=6 && Stepping=2 || Model=(4I5|6) && Stepping >=3 || Model=(8|9) && Stepping >= 1 || Model Ah + // Set SMBUS:0x5c[22:16] = 20 -- Set amount of idle time to 20ms + if (IsLs2Mode() && (Family == 0x10)) { + switch( Model ){ + case 0x4: + case 0x5: + if( Stepping >= 3 ) dwTempVar = 0x14; + break; + case 0x6: + if( Stepping >= 2 ) dwTempVar = 0x14; + break; + case 0x8: + if( Stepping >= 1 ) dwTempVar = 0x14; + break; + case 0x9: + if( Stepping >= 1 ) dwTempVar = 0x14; + break; + case 0xA: + dwTempVar = 0x14; + break; + } + } + // Set SMBUS:0x5c[7] = 1 -- CheckC3, set 1 to check for C3 state + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG5C, AccWidthUint32 | S3_SAVE, ~(0x7F << 16), (dwTempVar << 16) + BIT7); + } + + //Message-Triggered C1E is not supported in Family 10h G34r1 HY-D0 (0x00100F90) and Family 10h C32 HY-D0 (0x00100F80) processor. + ddValue = CpuId.REG_EAX; + if ((getRevisionID() == SB700_A15) && (pConfig->MTC1e == CIMX_OPTION_ENABLED) && (ddValue != 0x00100F90) && (ddValue != 0x00100F80)) { + // + // MTC1e: For A15 (server only) - The settings here borrow the existing legacy ACPI BM_STS and BM_RLD bits as a + // mechanism to break out from C1e under a non-OS controlled C3 state. Under this scheme, the logic will automatically + // clear the BM_STS bit whenever it enters C1e state. Whenever BM_REQ#/IDLE_EXIT# is detected, it will cause the + // BM_STS bit to be set and therefore causing the C state logic to exit. + // + // Set BMReqEnable (SMBUS:0x64[5]=1) to enable the pin as BM_REQ#/IDLE_EXIT# to the C state logic + // Set CheckOwnReq (SMBUS:0x64[4]=0) to force IDLE_EXIT# to set BM_STS and wake from C3 + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG64, AccWidthUint8 | S3_SAVE, 0xEF, BIT5); + + // Set PCI_Active_enable (PMIO:0x61[2]=1), the secondary enable bit for SB to monitor BM_REQ#/IDLE_EXIT# + RWPMIO(SB_PMIO_REG61, AccWidthUint8 | S3_SAVE, 0xff, BIT2); + + // Set auto_bm_rld (PMIO:0x9a[4]=1) so that assertion on BM_REQ#/IDLE_EXIT# pin will cause C state logic to break out from C1e + // Set auto_clr_bm_sts (PMIO:0x9a[5]=1) will cause the C state logic to automatically clear the BM_STS bit whenever it sees a C1e entry + RWPMIO(SB_PMIO_REG9A, AccWidthUint8 | S3_SAVE, 0xff, BIT5 + BIT4); + + + // MTC1e: The logic basically counts the number of HALT_ENTER messages. When it has received the number of HALT_ENTER + // messages equal to NumOfCpu (PMIO:0xc9[3:0]), it will generate an internal C1e command to the C state logic. + // The count increments when it sees HALT_ENTER message after it has generated the C1e command, and it treats the + // HALT_EXIT message as a break event. + // + // Set ServerCEn + RWPMIO(SB_PMIO_REGBB, AccWidthUint8 | S3_SAVE, 0xFF, BIT7); + + // Enable counting HALT + // PMIO:0xc9[4] = CountHaltMsgEn + // PMIO:0xc9[3:0] = NumOfCpu, set to 1 since CPU logic will coordinate among cores and only generate one HALT message + RWPMIO(SB_PMIO_REGC9, AccWidthUint8 | S3_SAVE, 0xE0, BIT4 + 1); + } + + c3PopupSetting(pConfig); + + TRACE((DMSG_SB_TRACE, "CIMx - Exiting commonInitEarlyBoot \n")); +} + + +void commonInitEarlyPost(AMDSBCFG* pConfig){ + //early post initialization of pmio space + programPmioByteTable( (REG8MASK *)FIXUP_PTR(&sbEarlyPostPmioInitTbl[0]), (sizeof(sbEarlyPostPmioInitTbl)/sizeof(REG8MASK)) ); + CallBackToOEM(PULL_UP_PULL_DOWN_SETTINGS, NULL, pConfig); +} + + +// AB-Link Configuration Table +ABTBLENTRY abTblEntry600[]={ + // Enabling Downstream Posted Transactions to Pass Non-Posted Transactions for the K8 Platform ABCFG 0x10090[8] = 1 + // ABCFG 0x10090 [16] = 1, ensures the SMI# message to be sent before the IO command is completed. The ordering of + // SMI# and IO is important for the IO trap to work properly. + {ABCFG,SB_AB_REG10090 ,BIT16+BIT8 ,BIT16+BIT8 }, + // Enabling UpStream DMA Access AXCFG: 0x04[2]=1 + {AXCFG,SB_AB_REG04 ,BIT2 ,BIT2 }, + // Setting B-Link Prefetch Mode ABCFG 0x80 [17] = 1 ABCFG 0x80 [18] = 1 + {ABCFG,SB_AB_REG80 ,BIT17+BIT18 ,BIT17+BIT18 }, + // Disable B-Link client's credit variable in downstream arbitration equation (for All Revisions) + // ABCFG 0x9C[0] = 1 Disable credit variable in downstream arbitration equation + // Enabling Additional Address Bits Checking in Downstream Register Programming + // ABCFG 0x9C[1] = 1 + {ABCFG,SB_AB_REG9C ,BIT8+BIT1+BIT0 ,BIT8+BIT1+BIT0 }, + // Enabling IDE/PCIB Prefetch for Performance Enhancement + // IDE prefetch ABCFG 0x10060 [17] = 1 ABCFG 0x10064 [17] = 1 + // PCIB prefetch ABCFG 0x10060 [20] = 1 ABCFG 0x10064 [20] = 1 + {ABCFG,SB_AB_REG10060 ,BIT17+BIT20 ,BIT17+BIT20 }, // IDE+PCIB prefetch enable + {ABCFG,SB_AB_REG10064 ,BIT17+BIT20 ,BIT17+BIT20 }, // IDE+PCIB prefetch enable + // Enabling Detection of Upstream Interrupts ABCFG 0x94 [20] = 1 + // ABCFG 0x94 [19:0] = cpu interrupt delivery address [39:20] + {ABCFG,SB_AB_REG94 ,BIT20 ,BIT20+0x00FEE }, + // Programming cycle delay for AB and BIF clock gating + // Enabling AB and BIF Clock Gating + // Enabling AB Int_Arbiter Enhancement + // Enabling Requester ID + {ABCFG,SB_AB_REG10054, 0x00FFFFFF , 0x010407FF }, + {ABCFG,SB_AB_REG98 , 0xFFFF00FF , 0x00014700 }, // Enable the requestor ID for upstream traffic ABCFG 0x98[16]=1 +// {ABCFG,SB_AB_REG54 , 0x00FF0000 , 0x01040000 }, + {ABCFG,SB_AB_REG54 , 0x00FF0000 , 0x00040000 }, + + {ABCFG,0,0,-1}, // This dummy entry is to clear ab index + {-1, -1, -1, -1 }, +}; + + +// AB-Link Configuration Table +ABTBLENTRY abTblForA15[]={ + + //SMI Reordering fix + {ABCFG, SB_AB_REG90 ,BIT21 , BIT21 }, + {ABCFG, SB_AB_REG9C ,BIT15+BIT9+BIT5 ,BIT15+BIT9+BIT5}, + + //Posted pass NP Downstream feature + {AX_INDXC, SB_AB_REG02, BIT9 ,BIT9 }, + {ABCFG, SB_AB_REG9C, BIT14+BIT13+BIT12+BIT11+BIT10+BIT7+BIT6 , BIT14+BIT13+BIT12+BIT11+BIT10+BIT7+BIT6}, + {ABCFG, SB_AB_REG1009C, BIT5+BIT4 , BIT5+BIT4}, + + //Posted pass NP upstream feature + {ABCFG, SB_AB_REG58, BIT15+BIT14+BIT13+BIT12+BIT11, BIT15+BIT14+BIT13+BIT11}, + + //64 bit Non-posted memory write support + {AX_INDXC, SB_AB_REG02, BIT10 ,BIT10 }, + + {ABCFG, SB_AB_REG10090, BIT12+BIT11+BIT10+BIT9 , BIT12+BIT11+BIT10+BIT9}, + + {ABCFG,0,0,-1}, // This dummy entry is to clear ab index + {-1, -1, -1, -1 }, +}; + + +// abLinkInitBeforePciEnum - Set ABCFG registers +void abLinkInitBeforePciEnum(AMDSBCFG* pConfig){ + ABTBLENTRY *pAbTblPtr; + + // disable PMIO decoding when AB is set + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG64, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT2, 0); + + pAbTblPtr = (ABTBLENTRY *)FIXUP_PTR(&abTblEntry600[0]); + abcfgTbl(pAbTblPtr); + + if (getRevisionID() > SB700_A11){ + //Enable OHCI Prefetch + writeAlink( (SB_AB_REG80 | (ABCFG << 30)), (readAlink((SB_AB_REG80 | (ABCFG << 30)))) | BIT0); + //Register bit to maintain correct ordering of SMI and IO write completion + writeAlink( (SB_AB_REG8C | (ABCFG << 30)), (readAlink((SB_AB_REG8C | (ABCFG << 30)))) | BIT8); + } + + if (getRevisionID() >= SB700_A14){ + //Enable fix for TT SB01345 + writeAlink( (SB_AB_REG90 | (ABCFG << 30)), (readAlink((SB_AB_REG90 | (ABCFG << 30)))) | BIT17); + //Disable IO Write and SMI ordering enhancement + writeAlink( (SB_AB_REG9C | (ABCFG << 30)), (readAlink((SB_AB_REG9C | (ABCFG << 30)))) & (0xFFFFFEFF)); + } + + if (getRevisionID() >= SB700_A15) { + pAbTblPtr = (ABTBLENTRY *)FIXUP_PTR(&abTblForA15[0]); + abcfgTbl(pAbTblPtr); + } + + + // enable pmio decoding after ab is configured + // or BYTE PTR es:[ebp+SMBUS_BUS_DEV_FUN shl 12 + SB_SMBUS_REG64], BIT2 + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG64, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT2, BIT2); +} + + +void abcfgTbl(ABTBLENTRY* pABTbl){ + UINT32 ddValue; + + while ((pABTbl->regType) != 0xFF){ + TRACE((DMSG_SB_TRACE, "RegType: %X, RegNumber:%X, AndMask=%X, OrMask=%X \n",pABTbl->regType , pABTbl->regIndex, pABTbl->regMask, pABTbl->regData)); + if (pABTbl->regType > AX_INDXP){ + ddValue = pABTbl->regIndex | (pABTbl->regType << 30); + writeAlink(ddValue, ((readAlink(ddValue)) & (0xFFFFFFFF^(pABTbl->regMask)))|pABTbl->regData); + } + else{ + ddValue = 0x30 | (pABTbl->regType << 30); + writeAlink(ddValue, pABTbl->regIndex); + ddValue = 0x34 | (pABTbl->regType << 30); + writeAlink(ddValue, ((readAlink(ddValue)) & (0xFFFFFFFF^(pABTbl->regMask)))|pABTbl->regData); + } + ++pABTbl; + } + + //Clear ALink Access Index + ddValue = 0; + WriteIO(ALINK_ACCESS_INDEX, AccWidthUint32 | S3_SAVE, &ddValue); + TRACE((DMSG_SB_TRACE, "Exiting abcfgTbl\n")); +} + + +// programSubSystemIDs - Config Subsystem ID for all SB devices. +void programSubSystemIDs(AMDSBCFG* pConfig, BUILDPARAM *pStaticOptions){ + UINT32 ddTempVar; + UINT16 dwDeviceId; + + RWPCI((USB1_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->Ohci0Ssid); + RWPCI((USB1_OHCI1_BUS_DEV_FUN << 16) + SB_OHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->Ohci1Ssid); + RWPCI((USB2_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->Ohci2Ssid); + RWPCI((USB2_OHCI1_BUS_DEV_FUN << 16) + SB_OHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->Ohci3Ssid); + RWPCI((USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->Ohci4Ssid); + + RWPCI((USB1_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->Ehci0Ssid); + RWPCI((USB2_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->Ehci1Ssid); + + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->SmbusSsid); + RWPCI((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->IdeSsid); + RWPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->LpcSsid); + RWPCI((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->AzaliaSsid); + + ddTempVar = pStaticOptions->SataIDESsid; + if ( ((pConfig->SataClass) == AHCI_MODE) || ((pConfig->SataClass)== IDE_TO_AHCI_MODE) ) + ddTempVar = pStaticOptions->SataAHCISsid; + + ReadPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, &dwDeviceId); + if ((pConfig->SataClass) == RAID_MODE){ + ddTempVar = pStaticOptions->SataRAIDSsid; + if (dwDeviceId==SB750_SATA_DEFAULT_DEVICE_ID) + ddTempVar = pStaticOptions->SataRAID5Ssid; + } + + if ( ((pConfig->SataClass) == AMD_AHCI_MODE) || ((pConfig->SataClass) == IDE_TO_AMD_AHCI_MODE) ) { + ddTempVar = pStaticOptions->SataAHCISsid; + } + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG2C, AccWidthUint32 | S3_SAVE, 0x00, ddTempVar); +} + +void commonInitLateBoot(AMDSBCFG* pConfig){ + UINT8 dbValue; + UINT32 ddVar; + + // We need to do the following setting in late post also because some bios core pci enumeration changes these values + // programmed during early post. + // RPR 4.5 Master Latency Timer + // Master Latency Timer PCIB_PCI_config 0x0D/0x1B = 0x40 + // Enables the PCIB to retain ownership of the bus on the + // Primary side and on the Secondary side when GNT# is deasserted. + //mov BYTE PTR es:[ebp+SBP2P_BUS_DEV_FUN shl 12 + SB_P2P_REG0D], 40h + //mov BYTE PTR es:[ebp+SBP2P_BUS_DEV_FUN shl 12 + SB_P2P_REG1B], 40h + dbValue = 0x40; + WritePCI((SBP2P_BUS_DEV_FUN << 16) + SB_P2P_REG0D, AccWidthUint8, &dbValue); + WritePCI((SBP2P_BUS_DEV_FUN << 16) + SB_P2P_REG1B, AccWidthUint8, &dbValue); + + //SB P2P AutoClock control settings. + ddVar = (pConfig->PcibAutoClkCtrlLow) | (pConfig->PcibAutoClkCtrlLow); + WritePCI((SBP2P_BUS_DEV_FUN << 16) + SB_P2P_REG4C, AccWidthUint32, &ddVar); + ddVar = (pConfig->PcibClkStopOverride); + RWPCI((SBP2P_BUS_DEV_FUN << 16) + SB_P2P_REG50, AccWidthUint16, 0x3F, (UINT16) (ddVar << 6)); + + if (pConfig->MobilePowerSavings){ + //If RTC clock is not driven to any chip, it should be shut-off. If system uses external RTC, then SB needs to + //drive out RTC clk to external RTC chip. If system uses internal RTC, then this clk can be shut off. + RWPMIO(SB_PMIO_REG68, AccWidthUint8, ~(UINT32)BIT4, (pConfig->ExternalRTCClock)<<4); + if (!getClockMode()){ + if (!(pConfig->UsbIntClock) ){ + //If the external clock is used, the second PLL should be shut down + RWPMIO(SB_PMIO_REGD0, AccWidthUint8, 0xFF, BIT0); + // If external clock mode is used, the 25Mhz oscillator buffer can be turned-off by setting PMIO 0xD4[7]=1 + RWPMIO(SB_PMIO_REGD4, AccWidthUint8, 0xFF, BIT7); + //Disable unused clocks + RWPMIO(SB_PMIO_REGCA, AccWidthUint8, 0xFF, 0x7E); + } + } + writeAlink(0x30, SB_AB_REG40); + writeAlink(0x34, ((readAlink(0x34)) & 0xFFFF0000) | 0x008A); + + } + else{ + //Don't shutoff RTC clock + RWPMIO(SB_PMIO_REG68, AccWidthUint8, ~(UINT32)BIT4, 0); + //Dont disable second PLL + RWPMIO(SB_PMIO_REGD0, AccWidthUint8, ~(UINT32)BIT0, 0); + //Enable the 25Mhz oscillator + RWPMIO(SB_PMIO_REGD4, AccWidthUint8, ~(UINT32)BIT7, 0); + RWPMIO(SB_PMIO_REGCA, AccWidthUint8, 0xFF, 0x00); + } +} + + +void +hpetInit (AMDSBCFG* pConfig, BUILDPARAM *pStaticOptions) +{ + DESCRIPTION_HEADER* pHpetTable; + + if (pConfig->HpetTimer == 1) { + UINT8 dbTemp; + + RWPMIO(SB_PMIO_REG9A, AccWidthUint8, 0xFF, BIT7); + // Program the HPET BAR address + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGB4, AccWidthUint32 | S3_SAVE, 0, pStaticOptions->HpetBase); + + // Enable HPET MMIO decoding: SMBUS:0x43[4] = 1 + // Enable HPET MSI support only when HpetMsiDis == 0 + dbTemp = (pConfig->HpetMsiDis)? BIT4 : BIT7 + BIT6 + BIT5 + BIT4; + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG43, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT3, dbTemp); + // Program HPET default clock period + if (getRevisionID() >= SB700_A13) { + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG34, AccWidthUint32 | S3_SAVE, 0x00, 0x429B17E); + } + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG43, AccWidthUint8 | S3_SAVE, 0xFF, BIT3); + // Enable High Precision Event Timer (also called Multimedia Timer) interrupt + RWPCI((SMBUS_BUS_DEV_FUN << 16) + (SB_SMBUS_REG64+1), AccWidthUint8 | S3_SAVE, ~(UINT32)BIT2, BIT2); + } + else { + if (!(pConfig->S3Resume)) { +// pHpetTable = (DESCRIPTION_HEADER*)ACPI_LocateTable('TEPH'); + pHpetTable = (DESCRIPTION_HEADER*)ACPI_LocateTable(Int32FromChar ('T', 'E', 'P', 'H')); + if (pHpetTable != NULL) { +// pHpetTable->Signature = 'HPET'; + pHpetTable->Signature = Int32FromChar ('T', 'E', 'P', 'H'); + } + } + } +} + + +void c3PopupSetting(AMDSBCFG* pConfig){ + UINT8 dbTemp; + CPUID_DATA CpuId; + + CpuidRead (0x01, &CpuId); + //RPR 2.3 C-State and VID/FID Change + dbTemp = GetNumberOfCpuCores(); + if (dbTemp > 1){ + //PM_IO 0x9A[5]=1, For system with dual core CPU, set this bit to 1 to automatically clear BM_STS when the C3 state is being initiated. + //PM_IO 0x9A[4]=1, For system with dual core CPU, set this bit to 1 and BM_STS will cause C3 to wakeup regardless of BM_RLD + //PM_IO 0x9A[2]=1, Enable pop-up for C3. For internal bus mastering or BmReq# from the NB, the SB will de-assert + //LDTSTP# (pop-up) to allow DMA traffic, then assert LDTSTP# again after some idle time. + RWPMIO(SB_PMIO_REG9A, AccWidthUint8, 0xFF, BIT5+BIT4+BIT2); + } + + //SB700 needs to changed for RD790 support + //PM_IO 0x8F [4] = 0 for system with RS690 + //Note: RS690 north bridge has AllowLdtStop built for both display and PCIE traffic to wake up the HT link. + //BmReq# needs to be ignored otherwise may cause LDTSTP# not to toggle. + //PM_IO 0x8F[5]=1, Ignore BM_STS_SET message from NB + RWPMIO(SB_PMIO_REG8F, AccWidthUint8, ~(UINT32)(BIT5+BIT4), BIT5); + + //LdtStartTime = 10h for minimum LDTSTP# de-assertion duration of 16us in StutterMode. This is to guarantee that + //the HT link has been safely reconnected before it can be disconnected again. If C3 pop-up is enabled, the 16us also + //serves as the minimum idle time before LDTSTP# can be asserted again. This allows DMA to finish before the HT + //link is disconnected. + //Increase LDTSTOP Deassertion time for SP5100 to 20us, SB700 remains the same + dbTemp = (IsServer())? 0x14 : 0x10; + RWPMIO(SB_PMIO_REG88, AccWidthUint8, 0x00, dbTemp); + + //This setting provides 16us delay before the assertion of LDTSTOP# when C3 is entered. The + //delay will allow USB DMA to go on in a continous manner + RWPMIO(SB_PMIO_REG89, AccWidthUint8, 0x00, 0x10); + + //Set this bit to allow pop-up request being latched during the minimum LDTSTP# assertion time + RWPMIO(SB_PMIO_REG52, AccWidthUint8, 0xFF, BIT7); + +} + diff --git a/src/vendorcode/amd/cimx/sb700/SbCmnLib.c b/src/vendorcode/amd/cimx/sb700/SbCmnLib.c new file mode 100644 index 0000000..130dbc4 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/SbCmnLib.c @@ -0,0 +1,108 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + +UINT8 isEcPresent(){ + UINT8 dbFlag; + UINT16 dwVar0; + + //Read the EC configuration register base address from LPCCfg_A4[15:1] + //Write 0x5A to the EC config index register to unlock the access + //Write 0x20 to the EC config index register to select the device ID register + //Read the value of device ID register from the EC config data register + //If the value read is 0xB7, then EC is enabled. + //Write 0xA5 to re-lock the EC config index register if EC is enabled. + + ReadPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwVar0); + dwVar0 &= 0xFFFE; + RWIO(dwVar0, AccWidthUint8, 0, 0x5A); + RWIO(dwVar0, AccWidthUint8, 0, 0x20); + ReadIO(dwVar0+1, AccWidthUint8, &dbFlag); + RWIO(dwVar0, AccWidthUint8, 0, 0xA5); + + return ( dbFlag == 0xB7); +} + +void +getSbInformation ( +SB_INFORMATION *sbInfo){ + UINT16 dwDevId; + UINT8 dbRev; + + ReadPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG02, AccWidthUint16 | S3_SAVE, &dwDevId); + ReadPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG08, AccWidthUint8 | S3_SAVE, &dbRev); + sbInfo->sbModelMask = SB_MODEL_UNKNOWN; + if ( (dwDevId == SB7XX_DEVICE_ID) && (dbRev <= SB_Rev_Sb7xx_A14) ){ + sbInfo->sbModelMask |= SB_MODEL_SB700; + sbInfo->sbModelMask |= SB_MODEL_SR5690; + sbInfo->sbRev = dbRev; + ReadPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG9C, AccWidthUint8 | S3_SAVE, &dbRev); + if (dbRev & 01) + sbInfo->sbModelMask |= SB_MODEL_SB750; + if (isEcPresent()) + sbInfo->sbModelMask |= SB_MODEL_SB710; + return; + } +} + + +SB_CAPABILITY_SETTING +getSbCapability ( +SB_CAPABILITY_ITEM sbCapabilityItem +) +{ + SB_CAPABILITY_SETTING sbCapSetting=SB_UNKNOWN; + UINT32 ddTemp0; + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG43, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT3, 00); + ReadPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG10, AccWidthUint32, &ddTemp0); + + if (sbCapabilityItem < Sb_Unknown_Capability) + sbCapSetting = ((ddTemp0 >> (sbCapabilityItem << 1) ) & 0x03); + + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG43, AccWidthUint8 | S3_SAVE, 0xFF, BIT3); + return sbCapSetting; +} + + +void +setSbCapability ( +SB_CAPABILITY_ITEM sbCapabilityItem, SB_CAPABILITY_SETTING sbCapSetting +) +{ + UINT32 ddTemp0; + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG43, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT3, 00); + ReadPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG10, AccWidthUint32, &ddTemp0); + if ( (sbCapabilityItem < Sb_Unknown_Capability) & (sbCapSetting < Sb_Cap_Setting_Unknown) ) + ddTemp0 = (ddTemp0 & ~(0x03 << (sbCapabilityItem << 1))) | ( (sbCapSetting & 0x03) << (sbCapabilityItem << 1)); + WritePCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG10, AccWidthUint32, &ddTemp0); + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG43, AccWidthUint8 | S3_SAVE, 0xFF, BIT3); +} diff --git a/src/vendorcode/amd/cimx/sb700/SbCmnLib.h b/src/vendorcode/amd/cimx/sb700/SbCmnLib.h new file mode 100644 index 0000000..e737bc9 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/SbCmnLib.h @@ -0,0 +1,89 @@ +/*;******************************************************************************** +; +; Copyright (C) 2012 Advanced Micro Devices, Inc. +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; * Redistributions of source code must retain the above copyright +; notice, this list of conditions and the following disclaimer. +; * Redistributions in binary form must reproduce the above copyright +; notice, this list of conditions and the following disclaimer in the +; documentation and/or other materials provided with the distribution. +; * Neither the name of Advanced Micro Devices, Inc. nor the names of +; its contributors may be used to endorse or promote products derived +; from this software without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY +; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;*********************************************************************************/ + +#ifndef _AMD_SBLIB_H_ +#define _AMD_SBLIB_H_ + +//SB7xx Family +#define SB7xx_DEVICE_ID 0x4385 +#define SB700 0x00 +#define SB750 0x01 +#define SB710 0x02 + +//SB800 Family +#define SB800 0x10 + +#define SB_UNKNOWN 0xFF + +//SB700 Revision IDs +#define SB700_A11 0x39 +#define SB700_A12 0x3A +#define SB700_A13 0x3B +#define SB700_A14 0x3C + +#define SB_Rev_Sb7xx_A11 0x39 +#define SB_Rev_Sb7xx_A12 0x3A +#define SB_Rev_Sb7xx_A13 0x3B +#define SB_Rev_Sb7xx_A14 0x3C + + +typedef enum { + Sb_Raid0_1_Capability, /// + Sb_Raid5_Capability, /// + Sb_Ahci_Capability, /// + Sb_Unknown_Capability +} SB_CAPABILITY_ITEM; + + +typedef enum { + Sb_Cap_Setting_Auto, + Sb_Cap_Setting_Enabled, + Sb_Cap_Setting_Disabled, + Sb_Cap_Setting_Unknown +} SB_CAPABILITY_SETTING; + + +#define SB_MODEL_SB700 BIT0 +#define SB_MODEL_SB750 BIT1 +#define SB_MODEL_SB710 BIT2 +#define SB_MODEL_SR5690 BIT3 +#define SB_MODEL_UNKNOWN BIT31 + +typedef struct +{ + UINT32 sbModelMask; + UINT8 sbRev; +}SB_INFORMATION; + + +void getSbInformation (SB_INFORMATION *sbInfo); +SB_CAPABILITY_SETTING getSbCapability (SB_CAPABILITY_ITEM sbCapabilityItem); +void setSbCapability (SB_CAPABILITY_ITEM sbCapabilityItem, SB_CAPABILITY_SETTING sbCapSetting); + +#endif //#ifndef _AMD_SBLIB_H_ diff --git a/src/vendorcode/amd/cimx/sb700/SbDef.h b/src/vendorcode/amd/cimx/sb700/SbDef.h new file mode 100644 index 0000000..01fc1b5 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/SbDef.h @@ -0,0 +1,166 @@ +/*;******************************************************************************** +; +; Copyright (C) 2012 Advanced Micro Devices, Inc. +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; * Redistributions of source code must retain the above copyright +; notice, this list of conditions and the following disclaimer. +; * Redistributions in binary form must reproduce the above copyright +; notice, this list of conditions and the following disclaimer in the +; documentation and/or other materials provided with the distribution. +; * Neither the name of Advanced Micro Devices, Inc. nor the names of +; its contributors may be used to endorse or promote products derived +; from this software without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY +; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;*********************************************************************************/ + +#ifndef _AMD_SBDEF_H_ +#define _AMD_SBDEF_H_ + +//AMD Library Routines + +UINT64 +MsrRead ( + IN UINT32 MsrAddress + ); + +VOID +MsrWrite ( + IN UINT32 MsrAddress, + IN UINT64 Value + ); + +void ReadIO(UINT16 Address, UINT8 OpFlag, void *Value); +void WriteIO(UINT16 Address, UINT8 OpFlag, void *Value); +void ReadPCI(UINT32 Address, UINT8 OpFlag, void *Value); +void WritePCI(UINT32 Address,UINT8 OpFlag, void *Value); +void RWPCI(UINT32 Address,UINT8 OpFlag,UINT32 Mask,UINT32 Data); +void ReadIndexPCI32(UINT32 PciAddress,UINT32 IndexAddress,void* Value); +void WriteIndexPCI32(UINT32 PciAddress,UINT32 IndexAddress,UINT8 OpFlag,void* Value); +void RWIndexPCI32(UINT32 PciAddress,UINT32 IndexAddress,UINT8 OpFlag,UINT32 Mask,UINT32 Data); +void RWIO (UINT16 Address, UINT8 OpFlag, UINT32 Mask, UINT32 Data); +void ReadMEM(UINT32 Address,UINT8 OpFlag, void* Value); +void WriteMEM(UINT32 Address,UINT8 OpFlag, void* Value); +void RWMEM(UINT32 Address,UINT8 OpFlag,UINT32 Mask,UINT32 Data); +UINT32 IsFamily10(void); +UINT64 ReadMSR(UINT32 Address); +void WriteMSR(UINT32 Address,UINT64 Value); +void RWMSR(UINT32 Address, UINT64 Mask, UINT64 Value); +void* LocateImage(UINT32 Signature); +void* CheckImage( UINT32 Signature, void* ImagePtr); +void Stall(UINT32 uSec); +void Reset(void); +CIM_STATUS RWSMBUSBlock(UINT8 Controller, UINT8 Address, UINT8 Offset, UINT8 BufferSize, UINT8* BufferPrt); +void InitSerialOut(void); +void ReadPMIO(UINT8 Address, UINT8 OpFlag, void* Value); +void WritePMIO(UINT8 Address, UINT8 OpFlag, void* Value); +void RWPMIO(UINT8 Address, UINT8 OpFlag, UINT32 AndMask, UINT32 OrMask); +void ReadPMIO2(UINT8 Address, UINT8 OpFlag, void* Value); +void WritePMIO2(UINT8 Address, UINT8 OpFlag, void* Value); +void RWPMIO2(UINT8 Address, UINT8 OpFlag, UINT32 AndMask, UINT32 OrMask); +void outPort80(UINT32 pcode); +UINT8 GetNumberOfCpuCores(void); +UINT8 ReadNumberOfCpuCores(void); +UINT8 GetByteSum(void* pData, UINT32 Length); +UINT32 readAlink(UINT32 Index); +void writeAlink(UINT32 Index,UINT32 Data); + +//---------------------------------------------------------------------------------------------- +//---------------------------------------------------------------------------------------------- +void azaliaInitAfterPciEnum (AMDSBCFG* pConfig); + +void SendBytePort(UINT8 Data); +void SendStringPort(char* pstr); +void ItoA(UINT32 Value,int Radix,char* pstr); +AMDSBCFG* getConfigPointer(void); +void saveConfigPointer(AMDSBCFG* pConfig); + + +UINT32 GetFixUp(void); + +void sataInitAfterPciEnum(AMDSBCFG* pConfig); +void sataInitBeforePciEnum(AMDSBCFG* pConfig); +void sataInitLatePost(AMDSBCFG* pConfig); +void sataDriveDetection(AMDSBCFG* pConfig, UINT32 ddBar5); +void sataPhyWorkaround(AMDSBCFG* pConfig, UINT32 ddBar5); +void forceOOB(UINT32 ddBar5); +void shutdownUnconnectedSataPortClock(AMDSBCFG* pConfig, UINT32 ddBar5); +void restrictSataCapabilities(AMDSBCFG* pConfig); + + +void commonInitEarlyBoot(AMDSBCFG* pConfig); +void commonInitEarlyPost(AMDSBCFG* pConfig); +void setRevisionID(void); +UINT8 getRevisionID(void); +UINT8 IsServer (void); +UINT8 IsLs2Mode (void); +void abLinkInitBeforePciEnum(AMDSBCFG* pConfig); +void abcfgTbl(ABTBLENTRY* pABTbl); +void programSubSystemIDs(AMDSBCFG* pConfig, BUILDPARAM *pStaticOptions); +void commonInitLateBoot(AMDSBCFG* pConfig); +void hpetInit(AMDSBCFG* pConfig, BUILDPARAM *pStaticOptions); +void c3PopupSetting(AMDSBCFG* pConfig); + +void sbBeforePciInit (AMDSBCFG* pConfig); +void sbAfterPciInit(AMDSBCFG* pConfig); +void sbLatePost(AMDSBCFG* pConfig); +void sbBeforePciRestoreInit(AMDSBCFG* pConfig); +void sbAfterPciRestoreInit(AMDSBCFG* pConfig); +void sbSmmAcpiOn(AMDSBCFG* pConfig); +UINT32 GetPciebase(void); +UINT32 CallBackToOEM(UINT32 Func, UINTN Data,AMDSBCFG* pConfig); +void sbSmmService(AMDSBCFG* pConfig); +void softwareSMIservice(void); + +void sbPowerOnInit (AMDSBCFG *pConfig); +void programPciByteTable(REG8MASK* pPciByteTable, UINT16 dwTableSize); +void programPmioByteTable(REG8MASK* pPmioByteTable, UINT16 dwTableSize); +UINT8 getClockMode(void); +UINT16 readStrapStatus (void); + +void usbInitBeforePciEnum(AMDSBCFG* pConfig); +void usbInitAfterPciInit(AMDSBCFG* pConfig); +void usbInitMidPost(AMDSBCFG* pConfig); +void programOhciMmioForEmulation(void); + +void fcInitBeforePciEnum(AMDSBCFG* pConfig); + +unsigned char ReadIo8 (IN unsigned short Address); +unsigned short ReadIo16 (IN unsigned short Address); +unsigned int ReadIo32 (IN unsigned short Address); +void WriteIo8 (IN unsigned short Address, IN unsigned char Data); +void WriteIo16 (IN unsigned short Address, IN unsigned short Data); +void WriteIo32 (IN unsigned short Address, IN unsigned int Data); +unsigned long long ReadTSC (void); +void CpuidRead (IN unsigned int Func, IN OUT CPUID_DATA* Data); + +#ifndef NO_EC_SUPPORT +void EnterEcConfig(void); +void ExitEcConfig(void); +void ReadEC8(UINT8 Address, UINT8* Value); +void WriteEC8(UINT8 Address, UINT8* Value); +void RWEC8(UINT8 Address, UINT8 AndMask, UINT8 OrMask); +void ecPowerOnInit(BUILDPARAM *pBuildOptPtr, AMDSBCFG *pConfig); +void ecInitBeforePciEnum(AMDSBCFG* pConfig); +void ecInitLatePost(AMDSBCFG* pConfig); +#endif +UINT8 isEcPresent(void); + +void DispatcherEntry(void *pConfig); +AGESA_STATUS AmdSbDispatcher(void *pConfig); +void AMDFamily15CpuLdtStopReq(void); + +#endif //#ifndef _AMD_SBDEF_H_ diff --git a/src/vendorcode/amd/cimx/sb700/SbMain.c b/src/vendorcode/amd/cimx/sb700/SbMain.c new file mode 100644 index 0000000..7468eb2 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/SbMain.c @@ -0,0 +1,289 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + +#ifndef B1_IMAGE + +BUILDPARAM DfltStaticOptions={ + BIOS_SIZE, // BIOS Size + LEGACY_FREE, // Legacy Free Option + 0x00, // Dummy space holder + + 0x00, // ECKbd disable/enable + 0x00, // EcChannel0 disable/enable + 0x00, // Dummy space holder1 + + SMBUS0_BASE_ADDRESS, // Smbus Base Address; + SMBUS1_BASE_ADDRESS, // Smbus Base Address; + SIO_PME_BASE_ADDRESS, // SIO PME Base Address + WATCHDOG_TIMER_BASE_ADDRESS, // Watchdog Timer Base Address + SPI_BASE_ADDRESS, + + PM1_EVT_BLK_ADDRESS, // AcpiPm1EvtBlkAddr; + PM1_CNT_BLK_ADDRESS, // AcpiPm1CntBlkAddr; + PM1_TMR_BLK_ADDRESS, // AcpiPmTmrBlkAddr; + CPU_CNT_BLK_ADDRESS, // CpuControlBlkAddr; + GPE0_BLK_ADDRESS, // AcpiGpe0BlkAddr; + SMI_CMD_PORT, // SmiCmdPortAddr; + ACPI_PMA_CNT_BLK_ADDRESS, // AcpiPmaCntBlkAddr; + + EC_LDN5_MAILBOX_ADDRESS, + EC_LDN5_IRQ, + EC_LDN9_MAILBOX_ADDRESS, // EC LDN9 Mailbox address + RESERVED_VALUE, + RESERVED_VALUE, + RESERVED_VALUE, + RESERVED_VALUE, + + HPET_BASE_ADDRESS, // HPET Base address + + SATA_IDE_MODE_SSID, + SATA_RAID_MODE_SSID, + SATA_RAID5_MODE_SSID, + SATA_AHCI_SSID, + + OHCI0_SSID, + OHCI1_SSID, + EHCI0_SSID, + OHCI2_SSID, + OHCI3_SSID, + EHCI1_SSID, + OHCI4_SSID, + SMBUS_SSID, + IDE_SSID, + AZALIA_SSID, + LPC_SSID, + P2P_SSID, +}; + + +/********************************************************************************* +* +* Routine Description: Config SB Before PCI INIT +* +* Arguments: +* +* pConfig - SBconfiguration +* +* Returns: +* +* void +* +**********************************************************************************/ +void sbBeforePciInit (AMDSBCFG* pConfig){ + BUILDPARAM *pStaticOptions; + + pStaticOptions = &pConfig->BuildParameters; + TRACE((DMSG_SB_TRACE, "CIMx - Entering sbBeforePciInit \n")); + commonInitEarlyBoot(pConfig); + commonInitEarlyPost(pConfig); +#ifndef NO_EC_SUPPORT + ecInitBeforePciEnum(pConfig); +#endif + usbInitBeforePciEnum(pConfig); // USB POST TIME Only + fcInitBeforePciEnum(pConfig); // Preinit flash controller + sataInitBeforePciEnum(pConfig); // Init SATA class code and PHY + programSubSystemIDs(pConfig, pStaticOptions); // Set subsystem/vendor ID + + TRACE((DMSG_SB_TRACE, "CIMx - Exiting sbBeforePciInit \n")); +} + + +/********************************************************************************* +* +* Routine Description: Config SB After PCI INIT +* +* Arguments: +* +* pConfig - SBconfiguration +* +* Returns: void +* +* Reference: atiSbAfterPciInit +* +**********************************************************************************/ +void sbAfterPciInit(AMDSBCFG* pConfig){ + BUILDPARAM *pStaticOptions; + + TRACE((DMSG_SB_TRACE, "CIMx - Entering sbAfterPciInit \n")); + + pStaticOptions = &pConfig->BuildParameters; + usbInitMidPost(pConfig); //usb initialization which is required only during post + usbInitAfterPciInit(pConfig); // Init USB MMIO + sataInitAfterPciEnum(pConfig); // SATA port enumeration + azaliaInitAfterPciEnum(pConfig); // Detect and configure High Definition Audio + + TRACE((DMSG_SB_TRACE, "CIMx - Exiting sbAfterPciInit \n")); +} + + +/********************************************************************************* +* +* Routine Description: Config SB during late POST +* +* Arguments: +* +* pConfig - SBconfiguration +* +* Returns: void +* +* Reference: atiSbLatePost +* +**********************************************************************************/ +void sbLatePost(AMDSBCFG* pConfig){ + UINT16 dwVar; + BUILDPARAM *pStaticOptions; + pStaticOptions = &pConfig->BuildParameters; + TRACE((DMSG_SB_TRACE, "CIMx - Entering sbLatePost \n")); + ReadPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG02, AccWidthUint16, &dwVar); + if (dwVar != SB7XX_DEVICE_ID){ + // Display message that the SB is wrong and stop the system + TRACE((DMSG_SB_TRACE, "Current system does not have SB700 chipset. Stopping\n")); + for(;;); + } + commonInitLateBoot(pConfig); + sataInitLatePost(pConfig); + hpetInit(pConfig, pStaticOptions); // SB Configure HPET base and enable bit +#ifndef NO_EC_SUPPORT + ecInitLatePost(pConfig); +#endif +} + +/********************************************************************************* +* +* Routine Description: Config SB before ACPI S3 resume PCI config device restore +* +* Arguments: +* +* pConfig - SBconfiguration +* +* Returns: void +* +* Reference: AtiSbBfPciRestore +* +**********************************************************************************/ +void sbBeforePciRestoreInit(AMDSBCFG* pConfig){ + BUILDPARAM *pStaticOptions; + + TRACE((DMSG_SB_TRACE, "CIMx - Entering sbBeforePciRestoreInit \n")); + + pConfig->S3Resume = 1; + + pStaticOptions = &pConfig->BuildParameters; + commonInitEarlyBoot(pConfig); // set /SMBUS/ACPI/IDE/LPC/PCIB + abLinkInitBeforePciEnum(pConfig); // Set ABCFG registers + usbInitBeforePciEnum(pConfig); // USB POST TIME Only + fcInitBeforePciEnum(pConfig); // Preinit flash controller + sataInitBeforePciEnum(pConfig); + programSubSystemIDs(pConfig, pStaticOptions); // Set subsystem/vendor ID +} + + +/********************************************************************************* +* +* Routine Description: Config SB after ACPI S3 resume PCI config device restore +* +* Arguments: +* +* pConfig - SBconfiguration +* +* Returns: void +* +* Reference: AtiSbAfPciRestore +* +**********************************************************************************/ +void sbAfterPciRestoreInit(AMDSBCFG* pConfig){ + BUILDPARAM *pStaticOptions; + + pConfig->S3Resume = 1; + + pStaticOptions = &pConfig->BuildParameters; + TRACE((DMSG_SB_TRACE, "CIMx - Entering sbAfterPciRestoreInit \n")); + + commonInitLateBoot(pConfig); + sataInitAfterPciEnum(pConfig); + azaliaInitAfterPciEnum(pConfig); // Detect and configure High Definition Audio + hpetInit(pConfig, pStaticOptions); // SB Configure HPET base and enable bit + sataInitLatePost(pConfig); + sbSmmAcpiOn(pConfig); +} + + +/*++ + +Routine Description: + + SB config hook during ACPI_ON + +Arguments: + + pConfig - SBconfiguration + +Returns: + + void + +--*/ + +void sbSmmAcpiOn(AMDSBCFG* pConfig){ + UINT32 ddBar5; + UINT8 dbPort; + + //RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG60+2, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT1+BIT0), 0); + if (getRevisionID() >= SB700_A13) + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG43, AccWidthUint8 | S3_SAVE, 0xFF, BIT0); //Enable Legacy DMA prefetch enhancement + + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG60+2, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT1+BIT0), 0); + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG64+3, AccWidthUint8| S3_SAVE, ~(UINT32)BIT7, 0); + programOhciMmioForEmulation(); + + // For IDE_TO_AHCI_MODE and IDE_TO_AMD_AHCI_MODE, clear Interrupt Status register for all ports + ReadPCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG24), AccWidthUint32, &ddBar5); + if ((pConfig->SataClass == IDE_TO_AHCI_MODE) || (pConfig->SataClass == IDE_TO_AMD_AHCI_MODE)){ + for (dbPort = 0; dbPort <= 5; dbPort++) { + RWMEM(ddBar5 + SB_SATA_BAR5_REG110 + dbPort * 0x80, AccWidthUint32, 0x00, 0xFFFFFFFF); + } + } +} + + +UINT32 CallBackToOEM(UINT32 Func, UINTN Data,AMDSBCFG* pConfig){ + UINT32 Result=0; + TRACE((DMSG_SB_TRACE,"OEM Call Back Func [%x] Data [%x]\n",Func,Data)); + if (pConfig->StdHeader.pCallBack==NULL) + return Result; + Result = (*(pConfig->StdHeader.pCallBack))(Func,Data,pConfig); + TRACE((DMSG_SB_TRACE,"SB Hook Status [%x]\n",Result)); + return Result; +} + +#endif diff --git a/src/vendorcode/amd/cimx/sb700/SbPort.c b/src/vendorcode/amd/cimx/sb700/SbPort.c new file mode 100644 index 0000000..6c5740b --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/SbPort.c @@ -0,0 +1,441 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + +REG8MASK sbPorInitPciTable[] = { + // SMBUS Device(Bus 0, Dev 20, Func 0) + {0x00, SMBUS_BUS_DEV_FUN, 0}, + {SB_SMBUS_REGD0+2, 0x00, 0x01}, + {SB_SMBUS_REG40, 0x00, 0x44}, + {SB_SMBUS_REG40+1, 0xFF, 0xE9}, //Set smbus pci config 0x40[14]=1, This bit is used for internal bus flow control. + {SB_SMBUS_REG64, 0x00, 0xBF}, //SB_SMBUS_REG64[13]=1, delays back to back interrupts to the CPU + {SB_SMBUS_REG64+1, 0x00, 0x78}, + {SB_SMBUS_REG64+2, ~(UINT8)BIT6, 0x9E}, + {SB_SMBUS_REG64+3, 0x0F, 0x02}, + {SB_SMBUS_REG68+1, 0x00, 0x90}, + {SB_SMBUS_REG6C, 0x00, 0x20}, + {SB_SMBUS_REG78, 0x00, 0xFF}, + {SB_SMBUS_REG04, 0x00, 0x07}, + {SB_SMBUS_REG04+1, 0x00, 0x04}, + {SB_SMBUS_REGE1, 0x00, 0x99}, //RPR recommended setting, Sections "SMBUS Pci Config" & "IMC Access Control" + {SB_SMBUS_REGAC, ~(UINT8)BIT4, BIT1}, + {SB_SMBUS_REG60+2, ~(UINT8)(BIT1+BIT0) , 0x24}, // Disabling Legacy USB Fast SMI# Smbus_PCI_config 0x62 [5] = 1. Legacy USB + // can request SMI# to be sent out early before IO completion. + // Some applications may have problems with this feature. The BIOS should set this bit + // to 1 to disable the feature. Enabling Legacy Interrupt Smbus_PCI_Config 0x62[2]=1. + {0xFF, 0xFF, 0xFF}, + + // LPC Device(Bus 0, Dev 20, Func 3) + {0x00, LPC_BUS_DEV_FUN, 0}, + {SB_LPC_REG40, 0x00, 0x04}, + {SB_LPC_REG48, 0x00, 0x07}, + {SB_LPC_REG4A, 0x00, 0x20}, // Port Enable for IO Port 80h. + {SB_LPC_REG78, ~(UINT8)BIT0, 0x00}, + {SB_LPC_REG7C, 0x00, 0x05}, + {SB_LPC_REGB8+3, ~(UINT8)BIT0, BIT7+BIT6+BIT5+BIT3+BIT0}, //RPR recommended setting,Section "IO / Mem Decoding" & "SPI bus" + {0xFF, 0xFF, 0xFF}, + + // P2P Bridge(Bus 0, Dev 20, Func 4) + {0x00, SBP2P_BUS_DEV_FUN, 0}, + {SB_P2P_REG40, 0x00, 0x26}, // Enabling PCI-bridge subtractive decoding & PCI Bus 64-byte DMA Read Access + {SB_P2P_REG4B, 0xFF, BIT6+BIT7+BIT4}, + {SB_P2P_REG1C, 0x00, 0x11}, + {SB_P2P_REG1D, 0x00, 0x11}, + {SB_P2P_REG04, 0x00, 0x21}, + {SB_P2P_REG50, 0x02, 0x01}, // PCI Bridge upstream dual address window + {0xFF, 0xFF, 0xFF}, +}; + + +REG8MASK sbA13PorInitPciTable[] = { + // SMBUS Device(Bus 0, Dev 20, Func 0) + {0x00, SMBUS_BUS_DEV_FUN, 0}, + {SB_SMBUS_REG43, ~(UINT8)BIT3, 0x00}, //Make some hidden registers of smbus visible. + {SB_SMBUS_REG38, (UINT8)~BIT7, 00}, + {SB_SMBUS_REGAC+1, ~(UINT8)BIT5, 0}, //Enable SATA test/enhancement mode + {SB_SMBUS_REG43, 0xFF, BIT3}, //Make some hidden registers of smbus invisible. + {0xFF, 0xFF, 0xFF}, +}; + + +REG8MASK sbA14PorInitPciTable[] = { + // LPC Device(Bus 0, Dev 20, Func 3) + {0x00, LPC_BUS_DEV_FUN, 0}, + {SB_LPC_REG8C+2, ~(UINT8)BIT1, 00}, + {0xFF, 0xFF, 0xFF}, +}; + +REG8MASK sbPorPmioInitTbl[] = { + // index andmask ormask + {SB_PMIO_REG67, 0xFF, 0x02}, + {SB_PMIO_REG37, 0xFF, 0x04}, // Configure pciepme as rising edge + {SB_PMIO_REG50, 0x00, 0xE0}, // Enable CPU_STP (except S5) & PCI_STP + {SB_PMIO_REG60, 0xFF, 0x20}, // Enable Speaker + {SB_PMIO_REG65, (UINT8)~(BIT4+BIT7), 0x00},// Clear PM_IO 0x65[4] UsbResetByPciRstEnable to avoid S3 reset to reset USB + {SB_PMIO_REG55, ~(UINT8)BIT6, 0x07}, // Select CIR wake event to ACPI.GEVENT[23] & Clear BIT6 SoftPciRst for safety + {SB_PMIO_REG66, 0xFF, BIT5}, // Configure keyboard reset to generate pci reset + {SB_PMIO_REGB2, 0xFF, BIT7}, + {SB_PMIO_REG0E, 0xFF, BIT3}, // Enable ACPI IO decoding + {SB_PMIO_REGD7, 0xF6, 0x80}, + {SB_PMIO_REG7C, 0xFF, BIT4}, // enable RTC AltCentury register + + {SB_PMIO_REG75, 0xC0, 0x05}, // PME_TURN_OFF_MSG during ASF shutdown + {SB_PMIO_REG52, 0xC0, 0x08}, + + {SB_PMIO_REG8B, 0x00, 0x10}, + {SB_PMIO_REG69, 0xF9, 0x01 << 1}, // [Updated RPR] Set default WDT resolution to 10ms +}; + +REG8MASK sbA13PorPmioInitTbl[]={ + // index andmask ormask + {SB_PMIO_REGD7, 0xFF, BIT5+BIT0}, //Fixes for TT SB00068 & SB01054 (BIT5 & BIT0 correspondingly) + {SB_PMIO_REGBB, (UINT8)~BIT7, BIT6+BIT5}, //Fixes for TT SB00866 & SB00696 (BIT6 & BIT5 correspondingly) + // Always clear [7] to begin with SP5100 C1e disabled + +// {SB_PMIO_REG65, 0xFF, BIT7}, +// {SB_PMIO_REG75, 0xC0, 0x01}, // PME_TURN_OFF_MSG during ASF shutdown +// {SB_PMIO_REG52, 0xC0, 0x02}, + +}; + + +void sbPowerOnInit (AMDSBCFG *pConfig){ + UINT8 dbVar0, dbVar1, dbValue; + UINT16 dwTempVar; + BUILDPARAM *pBuildOptPtr; + + TRACE((DMSG_SB_TRACE, "CIMx - Entering sbPowerOnInit \n")); + + setRevisionID(); + ReadPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, &dwTempVar); + if (dwTempVar == SB750_SATA_DEFAULT_DEVICE_ID) + RWPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG9C, AccWidthUint8 | S3_SAVE, 0xFF, 0x01); + + // Set A-Link bridge access address. This address is set at device 14h, function 0, + // register 0f0h. This is an I/O address. The I/O address must be on 16-byte boundry. + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGF0, AccWidthUint32, 00, ALINK_ACCESS_INDEX); + + writeAlink(0x80000004, 0x04); // RPR 3.3 Enabling upstream DMA Access + writeAlink(0x30, 0x10); //AXINDC 0x10[9]=1, Enabling Non-Posted memory write for K8 platform. + writeAlink(0x34, readAlink(0x34) | BIT9); + + if (!(pConfig->ResetCpuOnSyncFlood)){ + //Enable reset on sync flood + writeAlink( (UINT32)( ((UINT32)SB_AB_REG10050) | ((UINT32)ABCFG << 30)), + (UINT32)( readAlink((((UINT32)SB_AB_REG10050) | ((UINT32)ABCFG << 30))) | ((UINT32)BIT2) )); + } + + pBuildOptPtr = &(pConfig->BuildParameters); + + WritePCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG90, AccWidthUint32 | S3_SAVE, &(pBuildOptPtr->Smbus0BaseAddress) ); + + dwTempVar = pBuildOptPtr->Smbus1BaseAddress & (UINT16)~BIT0; + if( dwTempVar != 0 ){ + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG58, AccWidthUint16 | S3_SAVE, 00, (dwTempVar|BIT0)); + // Disable ASF Slave controller on SB700 rev A15. + if (getRevisionID() == SB700_A15) { + RWIO((dwTempVar+0x0D), AccWidthUint8, (UINT8)~BIT6, BIT6); + } + } + + WritePCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG64, AccWidthUint16 | S3_SAVE, &(pBuildOptPtr->SioPmeBaseAddress)); + RWPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA0, AccWidthUint32 | S3_SAVE, 0x001F,(pBuildOptPtr->SpiRomBaseAddress)); + + WritePMIO(SB_PMIO_REG20, AccWidthUint16, &(pBuildOptPtr->AcpiPm1EvtBlkAddr)); + WritePMIO(SB_PMIO_REG22, AccWidthUint16, &(pBuildOptPtr->AcpiPm1CntBlkAddr)); + WritePMIO(SB_PMIO_REG24, AccWidthUint16, &(pBuildOptPtr->AcpiPmTmrBlkAddr)); + WritePMIO(SB_PMIO_REG26, AccWidthUint16, &(pBuildOptPtr->CpuControlBlkAddr)); + WritePMIO(SB_PMIO_REG28, AccWidthUint16, &(pBuildOptPtr->AcpiGpe0BlkAddr)); + WritePMIO(SB_PMIO_REG2A, AccWidthUint16, &(pBuildOptPtr->SmiCmdPortAddr)); + WritePMIO(SB_PMIO_REG2C, AccWidthUint16, &(pBuildOptPtr->AcpiPmaCntBlkAddr)); + RWPMIO(SB_PMIO_REG2E, AccWidthUint16, 0x00,(pBuildOptPtr->SmiCmdPortAddr)+8); + WritePMIO(SB_PMIO_REG6C, AccWidthUint32, &(pBuildOptPtr->WatchDogTimerBase)); + + //Program power on pci init table + programPciByteTable( (REG8MASK*)FIXUP_PTR(&sbPorInitPciTable[0]), sizeof(sbPorInitPciTable)/sizeof(REG8MASK) ); + //Program power on pmio init table + programPmioByteTable( (REG8MASK *)FIXUP_PTR(&sbPorPmioInitTbl[0]), (sizeof(sbPorPmioInitTbl)/sizeof(REG8MASK)) ); + + dbValue = 0x00; + ReadIO (SB_IOMAP_REGC14, AccWidthUint8, &dbValue); + dbValue &= 0xF3; + WriteIO (SB_IOMAP_REGC14, AccWidthUint8, &dbValue); + + dbValue = 0x0A; + WriteIO (SB_IOMAP_REG70, AccWidthUint8, &dbValue); + ReadIO (SB_IOMAP_REG71, AccWidthUint8, &dbValue); + dbValue &= 0xEF; + WriteIO (SB_IOMAP_REG71, AccWidthUint8, &dbValue); + + + if (getRevisionID() >= SB700_A13){ + programPciByteTable( (REG8MASK*)FIXUP_PTR(&sbA13PorInitPciTable[0]), sizeof(sbA13PorInitPciTable)/sizeof(REG8MASK) ); + programPmioByteTable( (REG8MASK *)FIXUP_PTR(&sbA13PorPmioInitTbl[0]), (sizeof(sbA13PorPmioInitTbl)/sizeof(REG8MASK)) ); + } + + if ((getRevisionID() >= SB700_A14) ) + programPciByteTable( (REG8MASK*)FIXUP_PTR(&sbA14PorInitPciTable[0]), sizeof(sbA14PorInitPciTable)/sizeof(REG8MASK) ); + + if ( (getRevisionID() >= SB700_A14) && ( (pConfig->TimerClockSource == 1) || (pConfig->TimerClockSource == 2) )){ + ReadPMIO(SB_PMIO_REGD4, AccWidthUint8, &dbVar1); + if (!(dbVar1 & BIT6)){ + RWPMIO(SB_PMIO_REGD4, AccWidthUint8, 0xFF, BIT6); + pConfig->RebootRequired=1; + } + } + + if (getRevisionID() > SB700_A11) { + if (pConfig->PciClk5 == 1) + RWPMIO(SB_PMIO_REG41, AccWidthUint8, ~(UINT32)BIT1, BIT1); // Enabled PCICLK5 for A12 + } + + dbVar0 = (pBuildOptPtr->BiosSize + 1) & 7; + if (dbVar0 > 4) { + dbVar0 = 0; + } + //KZ [061811]-It's used wrong BIOS SIZE for Coreboot. RWPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG6C, AccWidthUint8 | S3_SAVE, 0x00, 0xF8 << dbVar0); + + if (pConfig->Spi33Mhz) + //spi reg0c[13:12] to 01h to run spi 33Mhz in system bios + RWMEM((pBuildOptPtr->SpiRomBaseAddress)+SB_SPI_MMIO_REG0C,AccWidthUint16 | S3_SAVE, ~(UINT32)(BIT13+BIT12), BIT12); + + //SB internal spread spectrum settings. A reboot is required if the spread spectrum settings have to be changed + //from the existing value. + ReadPMIO(SB_PMIO_REG42, AccWidthUint8, &dbVar0); + if (pConfig->SpreadSpectrum != (dbVar0 >> 7) ) + pConfig->RebootRequired = 1; + if (pConfig->SpreadSpectrum) + RWPMIO(SB_PMIO_REG42, AccWidthUint8, ~(UINT32)BIT7, BIT7); + else + RWPMIO(SB_PMIO_REG42, AccWidthUint8, ~(UINT32)BIT7, 0); + + if ( !(pConfig->S3Resume) ){ + //To detect whether internal clock chip is used, do the following procedure + //set PMIO_B2[7]=1, then read PMIO_B0[4]; if it is 1, we are strapped to CLKGEN mode. + //if it is 0, we are using clock chip on board. + RWPMIO(SB_PMIO_REGB2, AccWidthUint8, 0xFF, BIT7); + + //Do the following programming only for SB700-A11. + //1. Set PMIO_B2 [7]=1 and read B0 and B1 and save those values. + //2. Set PMIO_B2 [7]=0 + //3. Write the saved values from step 1, back to B0 and B1. + //4. Set PMIO_B2 [6]=1. + ReadPMIO(SB_PMIO_REGB0, AccWidthUint16, &dwTempVar); + if (getRevisionID() == SB700_A11){ + RWPMIO(SB_PMIO_REGB2, AccWidthUint8, ~(UINT32)BIT7, 00); + WritePMIO(SB_PMIO_REGB0, AccWidthUint16, &dwTempVar); + RWPMIO(SB_PMIO_REGB2, AccWidthUint8, 0xFF, BIT6); + } + + if (!(dwTempVar & BIT4)){ + RWPMIO(SB_PMIO_REGD0, AccWidthUint8, ~(UINT32)BIT0, 0); //Enable PLL2 + + //we are in external clock chip on the board + if (pConfig->UsbIntClock == CIMX_OPTION_ENABLED){ + //Configure usb clock to come from internal PLL + RWPMIO(SB_PMIO_REGD2, AccWidthUint8, 0xFF, BIT3); //Enable 48Mhz clock from PLL2 + RWPMIO(SB_PMIO_REGBD, AccWidthUint8, ~(UINT32)BIT4, BIT4); //Tell USB PHY to use internal 48Mhz clock from PLL2 + } + else{ + //Configure usb clock to come from external clock + RWPMIO(SB_PMIO_REGBD, AccWidthUint8, ~(UINT32)BIT4, 0); //Tell USB PHY to use external 48Mhz clock from PLL2 + RWPMIO(SB_PMIO_REGD2, AccWidthUint8, ~(UINT32)BIT3, 00); //Disable 48Mhz clock from PLL2 + } + } + else{ + //we are using internal clock chip on this board + if (pConfig->UsbIntClock == CIMX_OPTION_ENABLED){ + //Configure usb clock to come from internal PLL + RWPMIO(SB_PMIO_REGD2, AccWidthUint8, ~(UINT32)BIT3, 0); //Enable 48Mhz clock from PLL2 + RWPMIO(SB_PMIO_REGBD, AccWidthUint8, ~(UINT32)BIT4, BIT4); //Tell USB PHY to use internal 48Mhz clock from PLL2 + } + else{ + //Configure usb clock to come from external clock + RWPMIO(SB_PMIO_REGBD, AccWidthUint8, ~(UINT32)BIT4, 0); //Tell USB PHY to use external 48Mhz clock from PLL2 + RWPMIO(SB_PMIO_REGD2, AccWidthUint8, ~(UINT32)BIT3, BIT3); //Disable 48Mhz clock from PLL2 + } + } + + ReadPMIO(SB_PMIO_REG43, AccWidthUint8, &dbVar0); + RWPMIO(SB_PMIO_REG43, AccWidthUint8, ~(UINT32)(BIT6+BIT5+BIT0), (pConfig->UsbIntClock << 5)); + //Check whether our usb clock settings changed compared to previous boot, if yes then we need to reboot. + if ( (dbVar0 & BIT0) || ( (pConfig->UsbIntClock) != ((dbVar0 & (BIT6+BIT5)) >> 5)) ) pConfig->RebootRequired = 1; + } + + if (pBuildOptPtr->LegacyFree) //if LEGACY FREE system + RWPCI(((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG44), AccWidthUint32 | S3_SAVE, 00, 0x0003C000); + else + RWPCI(((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG44), AccWidthUint32 | S3_SAVE, 00, 0xFF03FFD5); + + if ( (getRevisionID() == SB700_A14) || (getRevisionID() == SB700_A13)){ + RWPMIO(SB_PMIO_REG65, AccWidthUint8, 0xFF, BIT7); + RWPMIO(SB_PMIO_REG75, AccWidthUint8, 0xC0, BIT0); + RWPMIO(SB_PMIO_REG52, AccWidthUint8, 0xC0, BIT1); + } + + if (getRevisionID() >= SB700_A15) { + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG40+3, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT3), 0); + //Enable unconditional shutdown fix in A15 + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG38+1, AccWidthUint8 | S3_SAVE, 0xFF, BIT4); + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG40+3, AccWidthUint8 | S3_SAVE, 0xFF, BIT3); + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG06+1, AccWidthUint8 | S3_SAVE, 0xFF, 0xD0); + } + + // [Updated RPR] Set ImcHostSmArbEn(SMBUS:0xE1[5]) only when IMC is enabled + if (isEcPresent()) { + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGE1, AccWidthUint8 | S3_SAVE, 0xFF, BIT5); + } + + //According to AMD Family 15h Models 00h-0fh processor BKDG section 2.12.8 LDTSTOP requirement + // to program VID/FID LDTSTP# duration selection register + AMDFamily15CpuLdtStopReq(); + +#ifndef NO_EC_SUPPORT + ecPowerOnInit(pBuildOptPtr, pConfig); +#endif +} + + +void setRevisionID(void){ + UINT8 dbVar0, dbVar1; + + ReadPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG08), AccWidthUint8, &dbVar0); + ReadPMIO(SB_PMIO_REG53, AccWidthUint8, &dbVar1); + if ( (dbVar0 == 0x39) && (dbVar1 & BIT6) && !(dbVar1 & BIT7)){ + RWPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG40), AccWidthUint8, ~(UINT32)BIT0, BIT0); + RWPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG08), AccWidthUint8, 00, SB700_A12); + RWPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG40), AccWidthUint8, ~(UINT32)BIT0, 00); + } + ReadPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG08), AccWidthUint8, &dbVar0); +} + + +UINT8 getRevisionID(void){ + UINT8 dbVar0; + + ReadPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG08), AccWidthUint8, &dbVar0); + return dbVar0; +} + + +void AMDFamily15CpuLdtStopReq(void) { + CPUID_DATA CpuId; + CPUID_DATA CpuId_Brand; + UINT8 dbVar0, dbVar1, dbVar2; + + //According to AMD Family 15h Models 00h-0fh processor BKDG section 2.12.8 LDTSTOP requirement + //to program VID/FID LDTSTP# duration selection register + //If any of the following system configuration properties are true LDTSTP# assertion time required by the processor is 10us: + // 1. Any link in the system operating at a Gen 1 Frequency. + // 2. Also for server platform (G34/C32) set PM_REG8A[6:4]=100b (16us) + + CpuidRead (0x01, &CpuId); + CpuidRead (0x80000001, &CpuId_Brand); //BrandID, to read socket type + if ((CpuId.REG_EAX & 0xFFFFFF00) == 0x00600F00) { + + //Program to Gen 3 default value - 001b + RWPMIO(SB_PMIO_REG8A, AccWidthUint8, 0x8F, 0x10); //set [6:4]=001b + + //Any link in the system operating at a Gen 1 Frequency. + //Check Link 0 - Link connected regsister + ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REG98), AccWidthUint8, &dbVar2); + dbVar2 = dbVar2 & 0x01; + + if(dbVar2 == 0x01) { + //Check Link 0 - Link Frequency Freq[4:0] + ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REG89), AccWidthUint8, &dbVar0); + ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REG9C), AccWidthUint8, &dbVar1); + dbVar0 = dbVar0 & 0x0F; //Freq[3:0] + dbVar1 = dbVar1 & 0x01; //Freq[4] + dbVar0 = (dbVar1 << 4) | dbVar0; //Freq[4:0] + //Value 6 or less indicate Gen1 + if(dbVar0 <= 0x6) { + RWPMIO(SB_PMIO_REG8A, AccWidthUint8, 0x8F, 0x40); //set [6:4]=100b + } + } + + //Check Link 1 - Link connected regsister + ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGB8), AccWidthUint8, &dbVar2); + dbVar2 = dbVar2 & 0x01; + if(dbVar2 == 0x01) { + //Check Link 1 - Link Frequency Freq[4:0] + ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGA9), AccWidthUint8, &dbVar0); + ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGBC), AccWidthUint8, &dbVar1); + dbVar0 = dbVar0 & 0x0F; //Freq[3:0] + dbVar1 = dbVar1 & 0x01; //Freq[4] + dbVar0 = (dbVar1 << 4) | dbVar0; //Freq[4:0] + //Value 6 or less indicate Gen1 + if(dbVar0 <= 0x6) { + RWPMIO(SB_PMIO_REG8A, AccWidthUint8, 0x8F, 0x40); //set [6:4]=100b + } + } + + //Check Link 2 - Link connected regsister + ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGD8), AccWidthUint8, &dbVar2); + dbVar2 = dbVar2 & 0x01; + if(dbVar2 == 0x01) { + //Check Link 2 - Link Frequency Freq[4:0] + ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGC9), AccWidthUint8, &dbVar0); + ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGDC), AccWidthUint8, &dbVar1); + dbVar0 = dbVar0 & 0x0F; //Freq[3:0] + dbVar1 = dbVar1 & 0x01; //Freq[4] + dbVar0 = (dbVar1 << 4) | dbVar0; //Freq[4:0] + //Value 6 or less indicate Gen1 + if(dbVar0 <= 0x6) { + RWPMIO(SB_PMIO_REG8A, AccWidthUint8, 0x8F, 0x40); //set [6:4]=100b + } + } + + //Check Link 3 - Link connected regsister + ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGF8), AccWidthUint8, &dbVar2); + dbVar2 = dbVar2 & 0x01; + if(dbVar2 == 0x01) { + //Check Link 3 - Link Frequency Freq[4:0] + ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGE9), AccWidthUint8, &dbVar0); + ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGFC), AccWidthUint8, &dbVar1); + dbVar0 = dbVar0 & 0x0F; //Freq[3:0] + dbVar1 = dbVar1 & 0x01; //Freq[4] + dbVar0 = ((dbVar1 << 4) | dbVar0); //Freq[4:0] + //Value 6 or less indicate Gen1 + if(dbVar0 <= 0x6) { + RWPMIO(SB_PMIO_REG8A, AccWidthUint8, 0x8F, 0x40); //set [6:4]=100b + } + } + + // Server platform (G34/C32) set PM_REG8A[6:4]=100b (16us) + if(((CpuId_Brand.REG_EBX & 0xF0000000) == 0x30000000) || ((CpuId_Brand.REG_EBX & 0xF0000000) == 0x50000000)) { + RWPMIO(SB_PMIO_REG8A, AccWidthUint8, 0x8F, 0x40); //set [6:4]=100b + } + } + +} + diff --git a/src/vendorcode/amd/cimx/sb700/SbType.h b/src/vendorcode/amd/cimx/sb700/SbType.h new file mode 100644 index 0000000..faeae5d --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/SbType.h @@ -0,0 +1,249 @@ +/*;******************************************************************************** +; +; Copyright (C) 2012 Advanced Micro Devices, Inc. +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; * Redistributions of source code must retain the above copyright +; notice, this list of conditions and the following disclaimer. +; * Redistributions in binary form must reproduce the above copyright +; notice, this list of conditions and the following disclaimer in the +; documentation and/or other materials provided with the distribution. +; * Neither the name of Advanced Micro Devices, Inc. nor the names of +; its contributors may be used to endorse or promote products derived +; from this software without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY +; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;*********************************************************************************/ + +#ifndef _AMD_SBTYPE_H_ +#define _AMD_SBTYPE_H_ + +#pragma pack(push,1) + +typedef UINT32 (*CIM_HOOK_ENTRY)(UINT32 Param1, UINTN Param2, void* pConfig); +typedef void (*SMM_SERVICE_ROUTINE) (void); + +typedef struct _STDCFG{ + UINT32 pImageBase; + UINT32 pPcieBase; + UINT8 Func; + CIM_HOOK_ENTRY pCallBack; + UINT32 pB2ImageBase; +}STDCFG; //Size of stdcfg is 17 bytes + +typedef struct _BUILDPARAM +{ + UINT16 BiosSize:3; //0-1MB, 1-2MB, 2-4MB, 3-8MB, 7-512KB, all other values reserved + UINT16 LegacyFree:1; + UINT16 Dummy0:12; + + UINT16 EcKbd:1; + UINT16 EcChannel0:1; + UINT16 Dummy1:14; + + UINT32 Smbus0BaseAddress; + UINT16 Smbus1BaseAddress; + UINT32 SioPmeBaseAddress; + UINT32 WatchDogTimerBase; + UINT32 SpiRomBaseAddress; + + UINT16 AcpiPm1EvtBlkAddr; + UINT16 AcpiPm1CntBlkAddr; + UINT16 AcpiPmTmrBlkAddr; + UINT16 CpuControlBlkAddr; + UINT16 AcpiGpe0BlkAddr; + UINT16 SmiCmdPortAddr; + UINT16 AcpiPmaCntBlkAddr; + + UINT16 EcLdn5MailBoxAddr; + UINT8 EcLdn5Irq; + UINT16 EcLdn9MailBoxAddr; + UINT32 ReservedDword0; + UINT32 ReservedDword1; + UINT32 ReservedDword2; + UINT32 ReservedDword3; + + UINT32 HpetBase; //HPET Base address + + UINT32 SataIDESsid; + UINT32 SataRAIDSsid; + UINT32 SataRAID5Ssid; + UINT32 SataAHCISsid; + + UINT32 Ohci0Ssid; + UINT32 Ohci1Ssid; + UINT32 Ehci0Ssid; + UINT32 Ohci2Ssid; + UINT32 Ohci3Ssid; + UINT32 Ehci1Ssid; + UINT32 Ohci4Ssid; + UINT32 SmbusSsid; + UINT32 IdeSsid; + UINT32 AzaliaSsid; + UINT32 LpcSsid; + UINT32 P2PSsid; +}BUILDPARAM; + +typedef struct _CODECENTRY{ + UINT8 Nid; + UINT32 Byte40; +}CODECENTRY; + +typedef struct _CODECTBLLIST{ + UINT32 CodecID; + CODECENTRY* CodecTablePtr; +}CODECTBLLIST; + +typedef struct _AMDSBCFG +{ + STDCFG StdHeader; //offset 0:16 - 17 bytes + //UINT32 MsgXchgBiosCimx; //offset 17:20 - 4 bytes + UINT32 S3Resume:1; + UINT32 RebootRequired:1; + UINT32 Spi33Mhz:1; + UINT32 SpreadSpectrum:1; + UINT32 UsbIntClock:1; //0:Use external clock, 1:Use internal clock + UINT32 PciClk5:1; //0:disable, 1:enable + UINT32 TimerClockSource:2; //0:100Mhz PCIE Reference clock (same as SB700-A12, + //1: 14Mhz using 25M_48M_66M_OSC pin, 2: Auto (100Mhz for SB700-A12, 14Mhz + //using 25M_48m_66m_0SC pin for SB700-A14, SB710, SP5100 + UINT32 ResetCpuOnSyncFlood:1; //0:Reset CPU on Sync Flood, 1:Do not reset CPU on sync flood + UINT32 MsgXchgBiosCimxDummyBB:23; + + /** BuildParameters - The STATIC platform information for CIMx Module. */ + BUILDPARAM BuildParameters; + + //SATA Configuration + UINT32 SataController :1; //0, 0:disable 1:enable* //offset 25:28 - 4 bytes + UINT32 SataClass :3; //1, 0:IDE* 1:RAID 2:AHCI 3:Legacy IDE 4:IDE->AHCI 5:AMD_AHCI, 6:IDE->AMD_AHCI + UINT32 SataSmbus :1; //4, 0:disable 1:enable* + UINT32 SataAggrLinkPmCap:1; //5, 0:OFF 1:ON + UINT32 SataPortMultCap :1; //6, 0:OFF 1:ON + UINT32 SataReserved :2; //8:7, Reserved + UINT32 SataClkAutoOff :1; //9, AutoClockOff for IDE modes 0:Disabled, 1:Enabled + UINT32 SataIdeCombinedMode :1; //10, SataIDECombinedMode 0:Disabled, 1:Enabled + UINT32 SataIdeCombMdPriSecOpt:1; //11, Combined Mode, SATA as primary or secondary 0:primary 1:secondary + UINT32 SataReserved1 :6; //17:12, Not used currently + UINT32 SataEspPort :6; //23:18 SATA port is external accessiable on a signal only connector (eSATA:) + UINT32 SataClkAutoOffAhciMode:1; //24: Sata Auto clock off for AHCI mode + UINT32 SataHpcpButNonESP:6; //25:30 Hotplug capable but not e-sata port + UINT32 SataHideUnusedPort:1; //31, 0:Disabled 1:Enabled + + //Flash Configuration //offset 29:30 - 2 bytes + UINT16 FlashController :1; //0, 0:disable FC & enable IDE 1:enable FC & disable IDE + UINT16 FlashControllerMode:1; //1, 0:Flash behind SATA 1:Flash as standalone + UINT16 FlashHcCrc:1; //2, + UINT16 FlashErrorMode:1; //3 + UINT16 FlashNumOfBankMode:1; //4 + UINT16 FlashDummy:11; //5:15 + + //USB Configuration //offset 31:32 - 2 bytes + UINT16 Usb1Ohci0 :1; //0, 0:disable 1:enable* Bus 0 Dev 18 Func0 + UINT16 Usb1Ohci1 :1; //1, 0:disable 1:enable* Bus 0 Dev 18 Func1 + UINT16 Usb1Ehci :1; //2, 0:disable 1:enable* Bus 0 Dev 18 Func2 + UINT16 Usb2Ohci0 :1; //3, 0:disable 1:enable* Bus 0 Dev 19 Func0 + UINT16 Usb2Ohci1 :1; //4, 0:disable 1:enable* Bus 0 Dev 19 Func1 + UINT16 Usb2Ehci :1; //5, 0:disable 1:enable* Bus 0 Dev 19 Func2 + UINT16 Usb3Ohci :1; //6, 0:disable 1:enable* Bus 0 Dev 20 Func5 + UINT16 UsbOhciLegacyEmulation:1; //7, 0:Enabled, 1:Disabled + UINT16 UsbDummy :8; //8:15 + + //Azalia Configuration //offset 33:36 - 4 bytes + UINT32 AzaliaController:2; //0, 0:AUTO, 1:disable, 2:enable + UINT32 AzaliaPinCfg :1; //2, 0:disable, 1:enable + UINT32 AzaliaFrontPanel:2; //3, 0:AUTO, 1:disable, 2:enable + UINT32 FrontPanelDetected:1; //5, 0:Not detected, 1:detected + UINT32 AzaliaSdin0 :2; //6 + UINT32 AzaliaSdin1 :2; //8 + UINT32 AzaliaSdin2 :2; //10 + UINT32 AzaliaSdin3 :2; //12 + UINT32 AzaliaDummy :18; //14:31 + + CODECTBLLIST* pAzaliaOemCodecTablePtr; //offset 37:40 - 4 bytes + UINT32 pAzaliaOemFpCodecTableptr; //offset 41:44 - 4 bytes + + //Miscellaneous Configuration //offset 45:48 - 4 bytes + UINT32 MiscReserved0:1; //0 + UINT32 HpetTimer:1; //1, 0:disable 1:enable + UINT32 PciClks:5; //2:6, 0:disable, 1:enable + UINT32 MiscReserved1:3; //9:7, Reserved + UINT32 IdeController:1; //10, 0:Enable, 1:Disabled + UINT32 MobilePowerSavings:1; //11, 0:Disable, 1:Enable Power saving features especially for Mobile platform + UINT32 ExternalRTCClock:1; //12, 0:Don't Shut Off, 1:Shut Off, external RTC clock + UINT32 AcpiS1Supported:1; //13, 0:S1 not supported, 1:S1 supported + UINT32 AnyHT200MhzLink:1; //14, 0:No HT 200Mhz Link in platform, 1; There is 200MHz HT Link in platform + UINT32 WatchDogTimerEnable:1; //15, [0]: WDT disabled; 1: WDT enabled + UINT32 MTC1e:1; //16, Message Triggered C1e - 0:Disabled*, 1:Enabled + UINT32 HpetMsiDis:1; //17, HPET MSI - 0:Enable HPET MSI, 1:Disable + UINT32 EhciDataCacheDis:1; //18, 0:Date Cache Enabled, 1:Date Cache Disabled /** EHCI Async Data Cache Disable */ + UINT32 MiscDummy:13; + + UINT32 AsmAslInfoExchange0; //offset 49:52 - 4 bytes + UINT32 AsmAslInfoExchange1; //offset 53:56 + + //DebugOptions_1 //offset 57:60 + UINT32 FlashPinConfig :1; //0, 0:desktop mode 1:mobile mode + UINT32 UsbPhyPowerDown :1; //1 + UINT32 PcibClkStopOverride :10; //11:2 + UINT32 Debug1Reserved0:4; //15:11 + UINT32 AzaliaSnoop:1; //16 0:Disable, 1:Enable + UINT32 SataSscPscCap:1; //17, 0:Enable SSC/PSC capability, 1:Disable SSC/PSC capability + UINT32 SataPortMode:6; //23:18, 0: AUTO, 1:Force SATA port(6/5/4/3/2/1) to GEN1 + UINT32 SataPhyWorkaround:2; //25:24, 0:AUTO, 1:Enable, 2:Disable + UINT32 Gen1DeviceShutdownDuringPhyWrknd:2; //27:26, 0:AUTO, 1:YES, 2:NO + UINT32 OhciIsoOutPrefetchDis:1; //28, 0:Enable OHCI ISO OUT prefetch, 1:Disable + UINT32 Debug1Dummy:3; // + + //DebugOptions_2 + UINT32 PcibAutoClkCtrlLow:16; + UINT32 PcibAutoClkCtrlHigh:16; + + //TempMMIO + UINT32 TempMMIO:32; + +}AMDSBCFG; + +typedef struct _SMMSERVICESTRUC +{ + UINT8 enableRegNum; + UINT8 enableBit; + UINT8 statusRegNum; + UINT8 statusBit; + CHAR8 *debugMessage; + SMM_SERVICE_ROUTINE serviceRoutine; +}SMMSERVICESTRUC; + +typedef struct _ABTblEntry +{ + UINT8 regType; + UINT32 regIndex; + UINT32 regMask; + UINT32 regData; +}ABTBLENTRY; + +#define PCI_ADDRESS(bus,dev,func,reg) \ +(UINT32) ( (((UINT32)bus) << 24) + (((UINT32)dev) << 19) + (((UINT32)func) << 16) + ((UINT32)reg) ) + +typedef UINT32 CIM_STATUS; +#define CIM_SUCCESS 0x00000000 +#define CIM_ERROR 0x80000000 +#define CIM_UNSUPPORTED 0x80000001 + +#pragma pack(pop) + +#define CIMX_OPTION_DISABLED 0 +#define CIMX_OPTION_ENABLED 1 + +#endif // _AMD_SBTYPE_H_ diff --git a/src/vendorcode/amd/cimx/sb700/Smm.c b/src/vendorcode/amd/cimx/sb700/Smm.c new file mode 100644 index 0000000..0d752fb --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/Smm.c @@ -0,0 +1,91 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + +SMMSERVICESTRUC smmItemsTable[]={ + {SB_PMIO_REG0E, BIT2, SB_PMIO_REG0F, BIT2, (CHAR8 *)"Software SMI through SMI CMD port \n ", softwareSMIservice}, + {SB_PMIO_REG00, BIT4, SB_PMIO_REG01, BIT4, (CHAR8 *)"Software initiated SMI \n ", NULL}, + {SB_PMIO_REG02, 0xFF, SB_PMIO_REG05, 0xFF, (CHAR8 *)"SMI on IRQ15-8 \n ", NULL}, + {SB_PMIO_REG03, 0xFF, SB_PMIO_REG06, 0xFF, (CHAR8 *)"SMI on IRQ7-0 \n ", NULL}, + {SB_PMIO_REG04, 0xFF, SB_PMIO_REG07, 0xFF, (CHAR8 *)"SMI on legacy devices activity(Serial, FDD etc) \n ", NULL}, + {SB_PMIO_REG1C, 0xFF, SB_PMIO_REG1D, 0xFF, (CHAR8 *)"SMI on PIO 0123 \n ", NULL}, + {SB_PMIO_REGA8, 0x0F, SB_PMIO_REGA9, 0xFF, (CHAR8 *)"SMI on PIO 4567 \n ", NULL}, +}; + + +/*++ + +Routine Description: + + SB SMI service + +Arguments: + + pConfig - SBconfiguration + +Returns: + + void + +--*/ + +void sbSmmService(AMDSBCFG* pConfig){ + UINT8 i, dbEnableValue, dbStatusValue; + SMMSERVICESTRUC *pSmmItems; + SMM_SERVICE_ROUTINE serviceRoutine; + + pSmmItems = (SMMSERVICESTRUC *)FIXUP_PTR(&smmItemsTable[0]); + TRACE((DMSG_SB_TRACE, "CIMx - Entering SMM services \n")); + for (i = 1; i <= (sizeof(smmItemsTable)/sizeof(SMMSERVICESTRUC)); i++){ + dbEnableValue = pSmmItems->enableRegNum; + ReadPMIO(pSmmItems->enableRegNum, AccWidthUint8, &dbEnableValue); + ReadPMIO(pSmmItems->statusRegNum, AccWidthUint8, &dbStatusValue); + if ( (dbEnableValue & (pSmmItems->enableBit)) && (dbStatusValue & (pSmmItems->statusBit)) ){ + TRACE((DMSG_SB_TRACE, "\n \nSmi source is: %s \n", pSmmItems->debugMessage)); + TRACE((DMSG_SB_TRACE, "Enable Reg:%d Value:%d\n", pSmmItems->enableRegNum, dbEnableValue)); + TRACE((DMSG_SB_TRACE, "Status Reg:%d Value:%d\n\n", pSmmItems->statusRegNum, dbStatusValue)); + if ( (pSmmItems->serviceRoutine)!= NULL){ + serviceRoutine = (void *)FIXUP_PTR(pSmmItems->serviceRoutine); + serviceRoutine(); + } + } + } + TRACE((DMSG_SB_TRACE, "CIMx - Exiting SMM services \n")); +} + + +void softwareSMIservice(void){ + UINT16 dwSmiCmdPort, dwVar; + ReadPMIO(SB_PMIO_REG2A, AccWidthUint16, &dwSmiCmdPort); + ReadIO(dwSmiCmdPort, AccWidthUint16, &dwVar); + TRACE((DMSG_SB_TRACE, "SMI CMD Port Address: %X SMICMD Port value is %X \n", dwSmiCmdPort, dwVar)); +} diff --git a/src/vendorcode/amd/cimx/sb700/USB.c b/src/vendorcode/amd/cimx/sb700/USB.c deleted file mode 100644 index 9c5e7b3..0000000 --- a/src/vendorcode/amd/cimx/sb700/USB.c +++ /dev/null @@ -1,187 +0,0 @@ -/***************************************************************************** - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - ***************************************************************************/ - - -#include "Platform.h" - - -void usbInitBeforePciEnum(AMDSBCFG* pConfig){ - UINT8 dbVar=0; - - TRACE((DMSG_SB_TRACE, "Entering PreInit Usb \n")); - if (pConfig->Usb1Ohci0){ - dbVar = (pConfig->Usb1Ehci << 2); - dbVar |= ((pConfig->Usb1Ohci0) << 0); - dbVar |= ((pConfig->Usb1Ohci1) << 1); - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG68, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT0+BIT1+BIT2), dbVar ); - } - if (pConfig->Usb2Ohci0){ - dbVar = (pConfig->Usb2Ehci << 6) ; - dbVar |= ((pConfig->Usb2Ohci0) << 4); - dbVar |= ((pConfig->Usb2Ohci1) << 5); - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG68, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT6+BIT4+BIT5), dbVar ); - } - if (pConfig->Usb3Ohci) - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG68, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT7), ((pConfig->Usb3Ohci) << 7) ); - - RWPCI((USB1_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG50+1, AccWidthUint16 | S3_SAVE, ~(UINT32)(BIT4), BIT4); -} - - -void usbInitAfterPciInit(AMDSBCFG* pConfig){ - UINT32 ddBarAddress, ddVar; - - ReadPCI((USB1_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG10, AccWidthUint32, &ddBarAddress);//Get BAR address - if ( (ddBarAddress != -1) && (ddBarAddress != 0) ){ - //Enable Memory access - RWPCI((USB1_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG04, AccWidthUint8, 0, BIT1); - //USB Common PHY CAL & Control Register setting - ddVar = 0x00020F00; - WriteMEM(ddBarAddress+SB_EHCI_BAR_REGC0, AccWidthUint32, &ddVar); - //RPR - IN AND OUT DATA PACKET FIFO THRESHOLD - //EHCI BAR 0xA4 //IN threshold bits[7:0]=0x40 //OUT threshold bits[23:16]=0x40 - RWMEM(ddBarAddress+SB_EHCI_BAR_REGA4, AccWidthUint32, 0xFF00FF00, 0x00400040); - //RPR - EHCI dynamic clock gating feature - //EHCI_BAR 0xBC Bit[12] = 0, For normal operation, the clock gating feature must be disabled. - // Disables HS uFrame babble detection for erratum: EHCI_EOR + 9Ch [11] = 1 - RWMEM(ddBarAddress+SB_EHCI_BAR_REGBC, AccWidthUint16, ~(UINT32)(BIT12+BIT11), BIT11); - } - - ReadPCI((USB2_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG10, AccWidthUint32, &ddBarAddress);//Get BAR address - if ( (ddBarAddress != -1) && (ddBarAddress != 0) ){ - //Enable Memory access - RWPCI((USB2_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG04, AccWidthUint8, 0, BIT1); - //USB Common PHY CAL & Control Register setting - ddVar = 0x00020F00; - WriteMEM(ddBarAddress+SB_EHCI_BAR_REGC0, AccWidthUint32, &ddVar); - //RPR - IN AND OUT DATA PACKET FIFO THRESHOLD - //EHCI BAR 0xA4 //IN threshold bits[7:0]=0x40 //OUT threshold bits[23:16]=0x40 - RWMEM(ddBarAddress+SB_EHCI_BAR_REGA4, AccWidthUint32, 0xFF00FF00, 0x00400040); - //RPR - EHCI dynamic clock gating feature - //EHCI_BAR 0xBC Bit[12] = 0, For normal operation, the clock gating feature must be disabled. - // Disables HS uFrame babble detection for erratum: EHCI_EOR + 9Ch [11] = 1 - RWMEM(ddBarAddress+SB_EHCI_BAR_REGBC, AccWidthUint16, ~(UINT32)(BIT12+BIT11), BIT11); - } - - if (pConfig->UsbPhyPowerDown) - RWPMIO(SB_PMIO_REG65, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT0, BIT0); - else - RWPMIO(SB_PMIO_REG65, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT0, 0); - - // Disable the MSI capability of USB host controllers - RWPCI((USB1_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG40+1, AccWidthUint8 | S3_SAVE, 0xFF, BIT1+BIT0); - RWPCI((USB2_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG40+1, AccWidthUint8 | S3_SAVE, 0xFF, BIT1+BIT0); - RWPCI((USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG40+1, AccWidthUint8 | S3_SAVE, 0xFF, BIT0); - - //RPR recommended setting "EHCI Advance Asynchronous Enhancement DISABLE" - //Set EHCI_pci_configx50[28]='1' to disable the advance async enhancement feature to avoid the bug found in Linux. - //Set EHCI_pci_configx50[6]='1' to disable EHCI MSI support - //RPR recommended setting "EHCI Async Park Mode" - //Set EHCI_pci_configx50[23]='1' to disable "EHCI Async Park Mode support" - // RPR recommended setting "EHCI Advance PHY Power Savings" - // Set EHCI_pci_configx50[31]='1' if SB700 A12 & above - // Fix for EHCI controller driver yellow sign issue under device manager - // when used in conjunction with HSET tool driver. EHCI PCI config 0x50[20]=1 - RWPCI((USB1_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG50, AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, BIT31+BIT28+BIT23+BIT20+BIT6); - RWPCI((USB2_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG50, AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, BIT31+BIT28+BIT23+BIT20+BIT6); - - //RPR recommended setting to, enable fix to cover the corner case S3 wake up issue from some USB 1.1 devices - //OHCI 0_PCI_Config 0x50[16] = 1 - RWPCI((USB1_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG50+2, AccWidthUint8 | S3_SAVE, 0xFF, BIT0); - RWPCI((USB2_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG50+2, AccWidthUint8 | S3_SAVE, 0xFF, BIT0); - RWPCI((USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50+2, AccWidthUint8 | S3_SAVE, 0xFF, BIT0); - - if (getRevisionID() >= SB700_A14){ - RWPCI((USB1_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG50, AccWidthUint32 | S3_SAVE, ~(UINT32)(BIT28), BIT8+BIT7+BIT4+BIT3); - RWPCI((USB2_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG50, AccWidthUint32 | S3_SAVE, ~(UINT32)(BIT28), BIT8+BIT7+BIT4+BIT3); - - RWPCI((USB1_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, BIT26+BIT25+BIT17); - RWPCI((USB2_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, BIT26+BIT25+BIT17); - RWPCI((USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, BIT26+BIT25); - } - - if (getRevisionID() >= SB700_A15) { - //USB PID Error checking - RWPCI((USB1_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG50+1, AccWidthUint8 | S3_SAVE, 0xFF, BIT1); - RWPCI((USB2_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG50+1, AccWidthUint8 | S3_SAVE, 0xFF, BIT1); - } - - // RPR 6.25 - Optionally disable OHCI isochronous out prefetch - if (pConfig->OhciIsoOutPrefetchDis) { - RWPCI((USB1_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint16 | S3_SAVE, ~(UINT32)(BIT9 + BIT8), 0); - RWPCI((USB2_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint16 | S3_SAVE, ~(UINT32)(BIT9 + BIT8), 0); - RWPCI((USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint16 | S3_SAVE, ~(UINT32)(BIT9 + BIT8), 0); - } - - if ( pConfig->EhciDataCacheDis ) { - // Disable Async Data Cache, EHCI_pci_configx50[26]='1' - RWPCI ((USB1_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG50, AccWidthUint32 | S3_SAVE, ~(UINT32)BIT26, BIT26); - RWPCI ((USB2_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG50, AccWidthUint32 | S3_SAVE, ~(UINT32)BIT26, BIT26); - } -} - - -void usbInitMidPost(AMDSBCFG* pConfig){ - if (pConfig->UsbOhciLegacyEmulation == 0){ - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG60+2, AccWidthUint8 | S3_SAVE, 0xFF, BIT1+BIT0); - RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG64+3, AccWidthUint8 | S3_SAVE, 0xFF, BIT7); - } - else{ - programOhciMmioForEmulation(); - } -} - - -void programOhciMmioForEmulation(void){ - UINT32 ddBarAddress; - - ReadPCI((USB1_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG10, AccWidthUint32, &ddBarAddress);//Get BAR address - ddBarAddress &= 0xFFFFF000; - if ( (ddBarAddress != 0xFFFFF000) && (ddBarAddress != 0) ){ - //Enable Memory access - RWPCI((USB1_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG04, AccWidthUint8, 0, BIT1); - RWMEM(ddBarAddress+SB_OHCI_BAR_REG160, AccWidthUint32, 0, 0); - } - - ReadPCI((USB2_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG10, AccWidthUint32, &ddBarAddress);//Get BAR address - ddBarAddress &= 0xFFFFF000; - if ( (ddBarAddress != 0xFFFFF000) && (ddBarAddress != 0) ){ - //Enable Memory access - RWPCI((USB2_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG04, AccWidthUint8, 0, BIT1); - RWMEM(ddBarAddress+SB_OHCI_BAR_REG160, AccWidthUint32, 0, 0); - } - - ReadPCI((USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG10, AccWidthUint32, &ddBarAddress);//Get BAR address - if ( (ddBarAddress != 0xFFFFF000) && (ddBarAddress != 0) ){ - //Enable Memory access - RWPCI((USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG04, AccWidthUint8, 0, BIT1); - RWMEM(ddBarAddress+SB_OHCI_BAR_REG160, AccWidthUint32, 0, 0); - } -} diff --git a/src/vendorcode/amd/cimx/sb700/Usb.c b/src/vendorcode/amd/cimx/sb700/Usb.c new file mode 100644 index 0000000..9c5e7b3 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/Usb.c @@ -0,0 +1,187 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + + +void usbInitBeforePciEnum(AMDSBCFG* pConfig){ + UINT8 dbVar=0; + + TRACE((DMSG_SB_TRACE, "Entering PreInit Usb \n")); + if (pConfig->Usb1Ohci0){ + dbVar = (pConfig->Usb1Ehci << 2); + dbVar |= ((pConfig->Usb1Ohci0) << 0); + dbVar |= ((pConfig->Usb1Ohci1) << 1); + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG68, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT0+BIT1+BIT2), dbVar ); + } + if (pConfig->Usb2Ohci0){ + dbVar = (pConfig->Usb2Ehci << 6) ; + dbVar |= ((pConfig->Usb2Ohci0) << 4); + dbVar |= ((pConfig->Usb2Ohci1) << 5); + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG68, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT6+BIT4+BIT5), dbVar ); + } + if (pConfig->Usb3Ohci) + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG68, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT7), ((pConfig->Usb3Ohci) << 7) ); + + RWPCI((USB1_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG50+1, AccWidthUint16 | S3_SAVE, ~(UINT32)(BIT4), BIT4); +} + + +void usbInitAfterPciInit(AMDSBCFG* pConfig){ + UINT32 ddBarAddress, ddVar; + + ReadPCI((USB1_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG10, AccWidthUint32, &ddBarAddress);//Get BAR address + if ( (ddBarAddress != -1) && (ddBarAddress != 0) ){ + //Enable Memory access + RWPCI((USB1_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG04, AccWidthUint8, 0, BIT1); + //USB Common PHY CAL & Control Register setting + ddVar = 0x00020F00; + WriteMEM(ddBarAddress+SB_EHCI_BAR_REGC0, AccWidthUint32, &ddVar); + //RPR - IN AND OUT DATA PACKET FIFO THRESHOLD + //EHCI BAR 0xA4 //IN threshold bits[7:0]=0x40 //OUT threshold bits[23:16]=0x40 + RWMEM(ddBarAddress+SB_EHCI_BAR_REGA4, AccWidthUint32, 0xFF00FF00, 0x00400040); + //RPR - EHCI dynamic clock gating feature + //EHCI_BAR 0xBC Bit[12] = 0, For normal operation, the clock gating feature must be disabled. + // Disables HS uFrame babble detection for erratum: EHCI_EOR + 9Ch [11] = 1 + RWMEM(ddBarAddress+SB_EHCI_BAR_REGBC, AccWidthUint16, ~(UINT32)(BIT12+BIT11), BIT11); + } + + ReadPCI((USB2_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG10, AccWidthUint32, &ddBarAddress);//Get BAR address + if ( (ddBarAddress != -1) && (ddBarAddress != 0) ){ + //Enable Memory access + RWPCI((USB2_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG04, AccWidthUint8, 0, BIT1); + //USB Common PHY CAL & Control Register setting + ddVar = 0x00020F00; + WriteMEM(ddBarAddress+SB_EHCI_BAR_REGC0, AccWidthUint32, &ddVar); + //RPR - IN AND OUT DATA PACKET FIFO THRESHOLD + //EHCI BAR 0xA4 //IN threshold bits[7:0]=0x40 //OUT threshold bits[23:16]=0x40 + RWMEM(ddBarAddress+SB_EHCI_BAR_REGA4, AccWidthUint32, 0xFF00FF00, 0x00400040); + //RPR - EHCI dynamic clock gating feature + //EHCI_BAR 0xBC Bit[12] = 0, For normal operation, the clock gating feature must be disabled. + // Disables HS uFrame babble detection for erratum: EHCI_EOR + 9Ch [11] = 1 + RWMEM(ddBarAddress+SB_EHCI_BAR_REGBC, AccWidthUint16, ~(UINT32)(BIT12+BIT11), BIT11); + } + + if (pConfig->UsbPhyPowerDown) + RWPMIO(SB_PMIO_REG65, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT0, BIT0); + else + RWPMIO(SB_PMIO_REG65, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT0, 0); + + // Disable the MSI capability of USB host controllers + RWPCI((USB1_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG40+1, AccWidthUint8 | S3_SAVE, 0xFF, BIT1+BIT0); + RWPCI((USB2_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG40+1, AccWidthUint8 | S3_SAVE, 0xFF, BIT1+BIT0); + RWPCI((USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG40+1, AccWidthUint8 | S3_SAVE, 0xFF, BIT0); + + //RPR recommended setting "EHCI Advance Asynchronous Enhancement DISABLE" + //Set EHCI_pci_configx50[28]='1' to disable the advance async enhancement feature to avoid the bug found in Linux. + //Set EHCI_pci_configx50[6]='1' to disable EHCI MSI support + //RPR recommended setting "EHCI Async Park Mode" + //Set EHCI_pci_configx50[23]='1' to disable "EHCI Async Park Mode support" + // RPR recommended setting "EHCI Advance PHY Power Savings" + // Set EHCI_pci_configx50[31]='1' if SB700 A12 & above + // Fix for EHCI controller driver yellow sign issue under device manager + // when used in conjunction with HSET tool driver. EHCI PCI config 0x50[20]=1 + RWPCI((USB1_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG50, AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, BIT31+BIT28+BIT23+BIT20+BIT6); + RWPCI((USB2_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG50, AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, BIT31+BIT28+BIT23+BIT20+BIT6); + + //RPR recommended setting to, enable fix to cover the corner case S3 wake up issue from some USB 1.1 devices + //OHCI 0_PCI_Config 0x50[16] = 1 + RWPCI((USB1_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG50+2, AccWidthUint8 | S3_SAVE, 0xFF, BIT0); + RWPCI((USB2_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG50+2, AccWidthUint8 | S3_SAVE, 0xFF, BIT0); + RWPCI((USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50+2, AccWidthUint8 | S3_SAVE, 0xFF, BIT0); + + if (getRevisionID() >= SB700_A14){ + RWPCI((USB1_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG50, AccWidthUint32 | S3_SAVE, ~(UINT32)(BIT28), BIT8+BIT7+BIT4+BIT3); + RWPCI((USB2_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG50, AccWidthUint32 | S3_SAVE, ~(UINT32)(BIT28), BIT8+BIT7+BIT4+BIT3); + + RWPCI((USB1_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, BIT26+BIT25+BIT17); + RWPCI((USB2_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, BIT26+BIT25+BIT17); + RWPCI((USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, BIT26+BIT25); + } + + if (getRevisionID() >= SB700_A15) { + //USB PID Error checking + RWPCI((USB1_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG50+1, AccWidthUint8 | S3_SAVE, 0xFF, BIT1); + RWPCI((USB2_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG50+1, AccWidthUint8 | S3_SAVE, 0xFF, BIT1); + } + + // RPR 6.25 - Optionally disable OHCI isochronous out prefetch + if (pConfig->OhciIsoOutPrefetchDis) { + RWPCI((USB1_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint16 | S3_SAVE, ~(UINT32)(BIT9 + BIT8), 0); + RWPCI((USB2_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint16 | S3_SAVE, ~(UINT32)(BIT9 + BIT8), 0); + RWPCI((USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint16 | S3_SAVE, ~(UINT32)(BIT9 + BIT8), 0); + } + + if ( pConfig->EhciDataCacheDis ) { + // Disable Async Data Cache, EHCI_pci_configx50[26]='1' + RWPCI ((USB1_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG50, AccWidthUint32 | S3_SAVE, ~(UINT32)BIT26, BIT26); + RWPCI ((USB2_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG50, AccWidthUint32 | S3_SAVE, ~(UINT32)BIT26, BIT26); + } +} + + +void usbInitMidPost(AMDSBCFG* pConfig){ + if (pConfig->UsbOhciLegacyEmulation == 0){ + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG60+2, AccWidthUint8 | S3_SAVE, 0xFF, BIT1+BIT0); + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG64+3, AccWidthUint8 | S3_SAVE, 0xFF, BIT7); + } + else{ + programOhciMmioForEmulation(); + } +} + + +void programOhciMmioForEmulation(void){ + UINT32 ddBarAddress; + + ReadPCI((USB1_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG10, AccWidthUint32, &ddBarAddress);//Get BAR address + ddBarAddress &= 0xFFFFF000; + if ( (ddBarAddress != 0xFFFFF000) && (ddBarAddress != 0) ){ + //Enable Memory access + RWPCI((USB1_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG04, AccWidthUint8, 0, BIT1); + RWMEM(ddBarAddress+SB_OHCI_BAR_REG160, AccWidthUint32, 0, 0); + } + + ReadPCI((USB2_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG10, AccWidthUint32, &ddBarAddress);//Get BAR address + ddBarAddress &= 0xFFFFF000; + if ( (ddBarAddress != 0xFFFFF000) && (ddBarAddress != 0) ){ + //Enable Memory access + RWPCI((USB2_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG04, AccWidthUint8, 0, BIT1); + RWMEM(ddBarAddress+SB_OHCI_BAR_REG160, AccWidthUint32, 0, 0); + } + + ReadPCI((USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG10, AccWidthUint32, &ddBarAddress);//Get BAR address + if ( (ddBarAddress != 0xFFFFF000) && (ddBarAddress != 0) ){ + //Enable Memory access + RWPCI((USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG04, AccWidthUint8, 0, BIT1); + RWMEM(ddBarAddress+SB_OHCI_BAR_REG160, AccWidthUint32, 0, 0); + } +} diff --git a/src/vendorcode/amd/cimx/sb700/sbAMDLIB.h b/src/vendorcode/amd/cimx/sb700/sbAMDLIB.h deleted file mode 100644 index e8f6b38..0000000 --- a/src/vendorcode/amd/cimx/sb700/sbAMDLIB.h +++ /dev/null @@ -1,196 +0,0 @@ -/*;******************************************************************************** -; -; Copyright (C) 2012 Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;*********************************************************************************/ - -#ifndef _AMD_AMDLIB_H_ -#define _AMD_AMDLIB_H_ - -typedef CHAR8 *va_list; -#ifndef _INTSIZEOF - #define _INTSIZEOF(n)( (sizeof(n) + sizeof(UINTN) - 1) & ~(sizeof(UINTN) - 1) ) -#endif - -// Also support coding convention rules for var arg macros -#ifndef va_start -#define va_start(ap,v) ( ap = (va_list)&(v) + _INTSIZEOF(v) ) -#endif -#define va_arg(ap,t) ( *(t *)((ap += _INTSIZEOF(t)) - _INTSIZEOF(t)) ) -#define va_end(ap) ( ap = (va_list)0 ) - -#ifndef CIMx_DEBUG - #define CIMx_DEBUG 0 -#endif - - -#pragma pack(push,1) - -#define IMAGE_ALIGN 32*1024 -#define NUM_IMAGE_LOCATION 32 - -//Entry Point Call -typedef void (*CIM_IMAGE_ENTRY)(void* pConfig); - -//Hook Call - -typedef struct _Reg8Mask -{ - UINT8 bRegIndex; - UINT8 bANDMask; - UINT8 bORMask; -}REG8MASK; - - -typedef struct _CIMFILEHEADER{ - UINT32 AtiLogo; - UINT32 EntryPoint; - UINT32 ModuleLogo; - UINT32 ImageSize; - UINT16 Version; - UINT8 CheckSum; - UINT8 Reserved1; - UINT32 Reserved2; -}CIMFILEHEADER; - -typedef struct _CPUID_DATA{ - UINT32 REG_EAX; - UINT32 REG_EBX; - UINT32 REG_ECX; - UINT32 REG_EDX; -}CPUID_DATA; - -#ifndef BIT0 - #define BIT0 (1 << 0) -#endif -#ifndef BIT1 - #define BIT1 (1 << 1) -#endif -#ifndef BIT2 - #define BIT2 (1 << 2) -#endif -#ifndef BIT3 - #define BIT3 (1 << 3) -#endif -#ifndef BIT4 - #define BIT4 (1 << 4) -#endif -#ifndef BIT5 - #define BIT5 (1 << 5) -#endif -#ifndef BIT6 - #define BIT6 (1 << 6) -#endif -#ifndef BIT7 - #define BIT7 (1 << 7) -#endif -#ifndef BIT8 - #define BIT8 (1 << 8) -#endif -#ifndef BIT9 - #define BIT9 (1 << 9) -#endif -#ifndef BIT10 - #define BIT10 (1 << 10) -#endif -#ifndef BIT11 - #define BIT11 (1 << 11) -#endif -#ifndef BIT12 - #define BIT12 (1 << 12) -#endif -#ifndef BIT13 - #define BIT13 (1 << 13) -#endif -#ifndef BIT14 - #define BIT14 (1 << 14) -#endif -#ifndef BIT15 - #define BIT15 (1 << 15) -#endif -#ifndef BIT16 - #define BIT16 (1 << 16) -#endif -#ifndef BIT17 - #define BIT17 (1 << 17) -#endif -#ifndef BIT18 - #define BIT18 (1 << 18) -#endif -#ifndef BIT19 - #define BIT19 (1 << 19) -#endif -#ifndef BIT20 - #define BIT20 (1 << 20) -#endif -#ifndef BIT21 - #define BIT21 (1 << 21) -#endif -#ifndef BIT22 - #define BIT22 (1 << 22) -#endif -#ifndef BIT23 - #define BIT23 (1 << 23) -#endif -#ifndef BIT24 - #define BIT24 (1 << 24) -#endif -#ifndef BIT25 - #define BIT25 (1 << 25) -#endif -#ifndef BIT26 - #define BIT26 (1 << 26) -#endif -#ifndef BIT27 - #define BIT27 (1 << 27) -#endif -#ifndef BIT28 - #define BIT28 (1 << 28) -#endif -#ifndef BIT29 - #define BIT29 (1 << 29) -#endif -#ifndef BIT30 - #define BIT30 (1 << 30) -#endif -#ifndef BIT31 - #define BIT31 (1 << 31) -#endif - -#define PCI_ADDRESS(bus,dev,func,reg) \ -(UINT32) ( (((UINT32)bus) << 24) + (((UINT32)dev) << 19) + (((UINT32)func) << 16) + ((UINT32)reg) ) - -#pragma pack(pop) - -typedef enum { - AccWidthUint8 = 0, - AccWidthUint16, - AccWidthUint32, -} ACC_WIDTH; - -#define S3_SAVE 0x80 - -#endif //#ifndef _AMD_AMDLIB_H_ diff --git a/src/vendorcode/amd/cimx/sb800/ACPILIB.c b/src/vendorcode/amd/cimx/sb800/ACPILIB.c deleted file mode 100644 index bc11209..0000000 --- a/src/vendorcode/amd/cimx/sb800/ACPILIB.c +++ /dev/null @@ -1,166 +0,0 @@ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#include "SBPLATFORM.h" -#include "cbtypes.h" - -// -// -// Routine Description: -// -// Locate ACPI table -// -// Arguments: -// -// Signature - table signature -// -//Returns: -// -// pointer to ACPI table -// -// -VOID* -ACPI_LocateTable ( - IN UINT32 Signature - ) -{ - UINT32 i; - UINT32* RsdPtr; - UINT32* Rsdt; - UINTN tableOffset; - DESCRIPTION_HEADER* CurrentTable; - - RsdPtr = (UINT32*) (UINTN)0xe0000; - Rsdt = NULL; - do { - if ( *RsdPtr == Int32FromChar('R', 'S', 'D', ' ') && *(RsdPtr + 1) == Int32FromChar('P', 'T', 'R', ' ')) { - Rsdt = (UINT32*) (UINTN) ((RSDP*)RsdPtr)->RsdtAddress; - break; - } - RsdPtr += 4; - } while ( RsdPtr <= (UINT32*) (UINTN)0xffff0 ); - if ( Rsdt != NULL && ACPI_GetTableChecksum (Rsdt) == 0 ) { - for ( i = 0; i < (((DESCRIPTION_HEADER*)Rsdt)->Length - sizeof (DESCRIPTION_HEADER)) / 4; i++ ) { - tableOffset = *(UINTN*) ((UINT8*)Rsdt + sizeof (DESCRIPTION_HEADER) + i * 4); - CurrentTable = (DESCRIPTION_HEADER*)tableOffset; - if ( CurrentTable->Signature == Signature ) { - return CurrentTable; - } - } - } - return NULL; -} - -// -// -// Routine Description: -// -// Update table checksum -// -// Arguments: -// -// TablePtr - table pointer -// -// Returns: -// -// none -// -// -VOID -ACPI_SetTableChecksum ( - IN VOID* TablePtr - ) -{ - UINT8 Checksum; - Checksum = 0; - ((DESCRIPTION_HEADER*)TablePtr)->Checksum = 0; - Checksum = ACPI_GetTableChecksum (TablePtr); - ((DESCRIPTION_HEADER*)TablePtr)->Checksum = (UINT8)(0x100 - Checksum); -} - -// -// -// Routine Description: -// -// Get table checksum -// -// Arguments: -// -// TablePtr - table pointer -// -// Returns: -// -// none -// -// -UINT8 -ACPI_GetTableChecksum ( - IN VOID* TablePtr - ) -{ - return GetByteSum (TablePtr, ((DESCRIPTION_HEADER*)TablePtr)->Length); -} - - -UINT8 -GetByteSum ( - IN VOID* pData, - IN UINT32 Length - ) -{ - UINT32 i; - UINT8 Checksum; - Checksum = 0; - for ( i = 0; i < Length; i++ ) { - Checksum = Checksum + (*((UINT8*)pData + i)); - } - return Checksum; -} -VOID -GetSbAcpiMmioBase ( - OUT UINT32* AcpiMmioBase - ) -{ - UINT32 Value16; - - ReadPMIO (SB_PMIOA_REG24 + 2, AccWidthUint16, &Value16); - *AcpiMmioBase = Value16 << 16; -} - -VOID -GetSbAcpiPmBase ( - OUT UINT16* AcpiPmBase - ) -{ - ReadPMIO (SB_PMIOA_REG60, AccWidthUint16, AcpiPmBase); -} - diff --git a/src/vendorcode/amd/cimx/sb800/ACPILIB.h b/src/vendorcode/amd/cimx/sb800/ACPILIB.h deleted file mode 100644 index 73571f4..0000000 --- a/src/vendorcode/amd/cimx/sb800/ACPILIB.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -/** - * RSDP - ACPI 2.0 table RSDP - */ -typedef struct _RSDP -{ - unsigned long long Signature; /* RSDP signature "RSD PTR" */ - unsigned char Checksum; /* checksum of the first 20 bytes */ - unsigned char OEMID[6]; /* OEM ID, "LXBIOS" */ - unsigned char Revision; /* 0 for APCI 1.0, 2 for ACPI 2.0 */ - unsigned int RsdtAddress; /* physical address of RSDT */ - unsigned int Length; /* total length of RSDP (including extended part) */ - unsigned long long XsdtAddress; /* physical address of XSDT */ - unsigned char ExtendedChecksum; /* chechsum of whole table */ - unsigned char Reserved[3]; -} RSDP; - - -/** - * DESCRIPTION_HEADER - ACPI common table header - */ -typedef struct _DESCRIPTION_HEADER -{ - unsigned int Signature; /* ACPI signature (4 ASCII characters) */ - unsigned int Length; /* Length of table, in bytes, including header */ - unsigned char Revision; /* ACPI Specification minor version # */ - unsigned char Checksum; /* To make sum of entire table == 0 */ - unsigned char OEMID[6]; /* OEM identification */ - unsigned char OEMTableID[8]; /* OEM table identification */ - unsigned int OEMRevision; /* OEM revision number */ - unsigned int CreatorID; /* ASL compiler vendor ID */ - unsigned int CreatorRevision; /* ASL compiler revision number */ -} DESCRIPTION_HEADER; - -void* ACPI_LocateTable (IN unsigned int Signature); -void ACPI_SetTableChecksum (IN void* TablePtr); -unsigned char ACPI_GetTableChecksum (IN void* TablePtr); -unsigned char GetByteSum (IN void* pData, IN unsigned int Length); diff --git a/src/vendorcode/amd/cimx/sb800/AMDLIB.c b/src/vendorcode/amd/cimx/sb800/AMDLIB.c deleted file mode 100644 index 90e9e27..0000000 --- a/src/vendorcode/amd/cimx/sb800/AMDLIB.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#include "SBPLATFORM.h" -#include "cbtypes.h" - -UINT8 -getNumberOfCpuCores ( - OUT VOID - ) -{ - UINT8 Result; - Result = 1; - Result = ReadNumberOfCpuCores (); - return Result; -} - -UINT32 -readAlink ( - IN UINT32 Index - ) -{ - UINT32 Data; - WriteIO (ALINK_ACCESS_INDEX, AccWidthUint32, &Index); - ReadIO (ALINK_ACCESS_DATA, AccWidthUint32, &Data); - //Clear Index - Index = 0; - WriteIO (ALINK_ACCESS_INDEX, AccWidthUint32, &Index); - return Data; -} - -VOID -writeAlink ( - IN UINT32 Index, - IN UINT32 Data - ) -{ - WriteIO (ALINK_ACCESS_INDEX, AccWidthUint32 | S3_SAVE, &Index); - WriteIO (ALINK_ACCESS_DATA, AccWidthUint32 | S3_SAVE, &Data); - //Clear Index - Index = 0; - WriteIO (ALINK_ACCESS_INDEX, AccWidthUint32 | S3_SAVE, &Index); -} - -VOID -rwAlink ( - IN UINT32 Index, - IN UINT32 AndMask, - IN UINT32 OrMask - ) -{ - UINT32 AccesType; - AccesType = Index & 0xE0000000; - if (AccesType == (AXINDC << 29)) { - writeAlink ((SB_AX_INDXC_REG30 | AccesType), Index & 0x1FFFFFFF); - Index = (SB_AX_DATAC_REG34 | AccesType); - } else if (AccesType == (AXINDP << 29)) { - writeAlink ((SB_AX_INDXP_REG38 | AccesType), Index & 0x1FFFFFFF); - Index = (SB_AX_DATAP_REG3C | AccesType); - } - writeAlink (Index, (readAlink (Index) & AndMask) | OrMask ); -} - diff --git a/src/vendorcode/amd/cimx/sb800/AMDSBLIB.c b/src/vendorcode/amd/cimx/sb800/AMDSBLIB.c deleted file mode 100644 index a5d92ad..0000000 --- a/src/vendorcode/amd/cimx/sb800/AMDSBLIB.c +++ /dev/null @@ -1,152 +0,0 @@ -/** - * @file - * - * Southbridge IO access common routine - * - * - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: CIMx-SB - * @e sub-project: - * @e $Revision:$ @e $Date:$ - * - */ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#include "SBPLATFORM.h" -#include "cbtypes.h" - -/*----------------------------------------------------------------------------------------*/ -/** - * SbStall - Delay routine - * - * - * - * @param[in] uSec - * - */ -VOID -SbStall ( - IN UINT32 uSec - ) -{ - UINT16 timerAddr; - UINT32 startTime; - UINT32 elapsedTime; - - ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG64, AccWidthUint16, &timerAddr); - if ( timerAddr == 0 ) { - uSec = uSec / 2; - while ( uSec != 0 ) { - ReadIO (0x80, AccWidthUint8, (UINT8 *) (&startTime)); - uSec--; - } - } else { - ReadIO (timerAddr, AccWidthUint32, &startTime); - for ( ;; ) { - ReadIO (timerAddr, AccWidthUint32, &elapsedTime); - if ( elapsedTime < startTime ) { - elapsedTime = elapsedTime + 0xFFFFFFFF - startTime; - } else { - elapsedTime = elapsedTime - startTime; - } - if ( (elapsedTime * 28 / 100) > uSec ) { - break; - } - } - } -} - -/*----------------------------------------------------------------------------------------*/ -/** - * SbReset - Generate a reset command - * - * - * - * @param[in] OpFlag - Dummy - * - */ -VOID -SbReset ( - IN UINT8 OpFlag - ) -{ - UINT8 Temp; - Temp = OpFlag; - RWIO (0xcf9, AccWidthUint8, 0x0, 0x06); -} - -/*----------------------------------------------------------------------------------------*/ -/** - * outPort80 - Send data to PORT 80 (debug port) - * - * - * - * @param[in] pcode - debug code (32 bits) - * - */ -VOID -outPort80 ( - IN UINT32 pcode - ) -{ - WriteIO (0x80, AccWidthUint8, &pcode); - return; -} - -/** - * AmdSbCopyMem - Memory copy - * - * @param[in] pDest - Destance address point - * @param[in] pSource - Source Address point - * @param[in] Length - Data length - * - */ -VOID -AmdSbCopyMem ( - IN VOID* pDest, - IN VOID* pSource, - IN UINTN Length - ) -{ - UINTN i; - UINT8 *Ptr; - UINT8 *Source; - Ptr = (UINT8*)pDest; - Source = (UINT8*)pSource; - for (i = 0; i < Length; i++) { - *Ptr = *Source; - Source++; - Ptr++; - } -} diff --git a/src/vendorcode/amd/cimx/sb800/AMDSBLIB.h b/src/vendorcode/amd/cimx/sb800/AMDSBLIB.h deleted file mode 100644 index 9e50bf9..0000000 --- a/src/vendorcode/amd/cimx/sb800/AMDSBLIB.h +++ /dev/null @@ -1,122 +0,0 @@ -/** - * @file - * - * Southbridge IO access common routine define file - * - * - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: CIMx-SB - * @e sub-project: - * @e $Revision:$ @e $Date:$ - * - */ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#ifndef __VENDORCODE_AMD_CIMX_SB800_AMDSBLIB_H__ -#define __VENDORCODE_AMD_CIMX_SB800_AMDSBLIB_H__ - -//AMDSBLIB Routines - -/** - * SbStall - Delay routine - * - * - * - * @param[in] uSec - * - */ -void SbStall (IN unsigned int uSec); - -/** - * SbReset - Generate a reset command - * - * - * - * @param[in] OpFlag - Dummy - * - */ -void SbReset (IN unsigned char OpFlag); - -/** - * outPort80 - Send data to PORT 80 (debug port) - * - * - * - * @param[in] pcode - debug code (32 bits) - * - */ -void outPort80 (IN unsigned int pcode); - -/** - * getEfuseStatue - Get Efuse status - * - * - * @param[in] Value - Return Chip strap status - * - */ -void getEfuseStatus (IN void* Value); - -/** - * AmdSbDispatcher - Dispatch Southbridge function - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -AGESA_STATUS AmdSbDispatcher (IN void *pConfig); - -/** - * AmdSbCopyMem - Memory copy - * - * @param[in] pDest - Destance address point - * @param[in] pSource - Source Address point - * @param[in] Length - Data length - * - */ -void AmdSbCopyMem (IN void* pDest, IN void* pSource, IN unsigned int Length); - - -/* SB800 CIMx and AGESA V5 can share lib functions */ -unsigned char ReadIo8(IN unsigned short Address); -unsigned short ReadIo16(IN unsigned short Address); -unsigned int ReadIo32(IN unsigned short Address); -void WriteIo8(IN unsigned short Address, IN unsigned char Data); -void WriteIo16(IN unsigned short Address, IN unsigned short Data); -void WriteIo32(IN unsigned short Address, IN unsigned int Data); -//void CpuidRead(IN unsigned int CpuidFcnAddress, OUT CPUID_DATA *Value); -void CpuidRead(unsigned int CpuidFcnAddress, CPUID_DATA *Value); -unsigned char ReadNumberOfCpuCores(void); - -#endif diff --git a/src/vendorcode/amd/cimx/sb800/AZALIA.c b/src/vendorcode/amd/cimx/sb800/AZALIA.c deleted file mode 100644 index ccb4f90..0000000 --- a/src/vendorcode/amd/cimx/sb800/AZALIA.c +++ /dev/null @@ -1,512 +0,0 @@ -/** - * @file - * - * Config Southbridge HD Audio Controller - * - * - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: CIMx-SB - * @e sub-project: - * @e $Revision:$ @e $Date:$ - * - */ - -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - - -#include "SBPLATFORM.h" -#include "cbtypes.h" - -// -// Declaration of local functions -// - -VOID configureAzaliaPinCmd (IN AMDSBCFG* pConfig, IN UINT32 ddBAR0, IN UINT8 dbChannelNum); -VOID configureAzaliaSetConfigD4Dword (IN CODECENTRY* tempAzaliaCodecEntryPtr, IN UINT32 ddChannelNum, IN UINT32 ddBAR0); - -/** - * Pin Config for ALC880, ALC882 and ALC883. - * - * - * - */ -const static CODECENTRY AzaliaCodecAlc882Table[] = -{ - {0x14, 0x01014010}, - {0x15, 0x01011012}, - {0x16, 0x01016011}, - {0x17, 0x01012014}, - {0x18, 0x01A19030}, - {0x19, 0x411111F0}, - {0x1a, 0x01813080}, - {0x1b, 0x411111F0}, - {0x1C, 0x411111F0}, - {0x1d, 0x411111F0}, - {0x1e, 0x01441150}, - {0x1f, 0x01C46160}, - {0xff, 0xffffffff} -}; - -/** - * Pin Config for ALC0262. - * - * - * - */ -const static CODECENTRY AzaliaCodecAlc262Table[] = -{ - {0x14, 0x01014010}, - {0x15, 0x411111F0}, - {0x16, 0x411111F0}, - {0x18, 0x01A19830}, - {0x19, 0x02A19C40}, - {0x1a, 0x01813031}, - {0x1b, 0x02014C20}, - {0x1c, 0x411111F0}, - {0x1d, 0x411111F0}, - {0x1e, 0x0144111E}, - {0x1f, 0x01C46150}, - {0xff, 0xffffffff} -}; - -/** - * Pin Config for ALC0269. - * - * - * - */ -const static CODECENTRY AzaliaCodecAlc269Table[] = -{ - {0x12, 0x99A30960}, - {0x14, 0x99130110}, - {0x15, 0x0221401F}, - {0x16, 0x99130120}, - {0x18, 0x01A19850}, - {0x19, 0x02A15951}, - {0x1a, 0x01813052}, - {0x1b, 0x0181405F}, - {0x1d, 0x40134601}, - {0x1e, 0x01441130}, - {0x11, 0x18567140}, - {0x20, 0x0030FFFF}, - {0xff, 0xffffffff} -}; - -/** - * Pin Config for ALC0861. - * - * - * - */ -const static CODECENTRY AzaliaCodecAlc861Table[] = -{ - {0x01, 0x8086C601}, - {0x0B, 0x01014110}, - {0x0C, 0x01813140}, - {0x0D, 0x01A19941}, - {0x0E, 0x411111F0}, - {0x0F, 0x02214420}, - {0x10, 0x02A1994E}, - {0x11, 0x99330142}, - {0x12, 0x01451130}, - {0x1F, 0x411111F0}, - {0x20, 0x411111F0}, - {0x23, 0x411111F0}, - {0xff, 0xffffffff} -}; - -/** - * Pin Config for ALC0889. - * - * - * - */ -const static CODECENTRY AzaliaCodecAlc889Table[] = -{ - {0x11, 0x411111F0}, - {0x14, 0x01014010}, - {0x15, 0x01011012}, - {0x16, 0x01016011}, - {0x17, 0x01013014}, - {0x18, 0x01A19030}, - {0x19, 0x411111F0}, - {0x1a, 0x411111F0}, - {0x1b, 0x411111F0}, - {0x1C, 0x411111F0}, - {0x1d, 0x411111F0}, - {0x1e, 0x01442150}, - {0x1f, 0x01C42160}, - {0xff, 0xffffffff} -}; - -/** - * Pin Config for ADI1984. - * - * - * - */ -const static CODECENTRY AzaliaCodecAd1984Table[] = -{ - {0x11, 0x0221401F}, - {0x12, 0x90170110}, - {0x13, 0x511301F0}, - {0x14, 0x02A15020}, - {0x15, 0x50A301F0}, - {0x16, 0x593301F0}, - {0x17, 0x55A601F0}, - {0x18, 0x55A601F0}, - {0x1A, 0x91F311F0}, - {0x1B, 0x014511A0}, - {0x1C, 0x599301F0}, - {0xff, 0xffffffff} -}; - -/** - * FrontPanel Config table list - * - * - * - */ -const static CODECENTRY FrontPanelAzaliaCodecTableList[] = -{ - {0x19, 0x02A19040}, - {0x1b, 0x02214020}, - {0xff, 0xffffffff} -}; - -/** - * Current HD Audio support codec list - * - * - * - */ -const static CODECTBLLIST azaliaCodecTableList[] = -{ - {0x010ec0880, (CODECENTRY*)&AzaliaCodecAlc882Table[0]}, - {0x010ec0882, (CODECENTRY*)&AzaliaCodecAlc882Table[0]}, - {0x010ec0883, (CODECENTRY*)&AzaliaCodecAlc882Table[0]}, - {0x010ec0885, (CODECENTRY*)&AzaliaCodecAlc882Table[0]}, - {0x010ec0889, (CODECENTRY*)&AzaliaCodecAlc889Table[0]}, - {0x010ec0262, (CODECENTRY*)&AzaliaCodecAlc262Table[0]}, - {0x010ec0269, (CODECENTRY*)&AzaliaCodecAlc269Table[0]}, - {0x010ec0861, (CODECENTRY*)&AzaliaCodecAlc861Table[0]}, - {0x011d41984, (CODECENTRY*)&AzaliaCodecAd1984Table[0]}, - { (UINT32) 0x0FFFFFFFF, (CODECENTRY*) (UINTN)0x0FFFFFFFF} -}; - -/** - * azaliaInitBeforePciEnum - Config HD Audio Before PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -azaliaInitBeforePciEnum ( - IN AMDSBCFG* pConfig - ) -{ - if ( pConfig->AzaliaController == 1 ) { - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEB, AccWidthUint8, ~BIT0, 0); - } else { - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEB, AccWidthUint8, ~BIT0, BIT0); - if ( pConfig->BuildParameters.HdAudioMsi) { - RWPCI ((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG44, AccWidthUint32 | S3_SAVE, ~BIT8, BIT8); - RWPCI ((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG60, AccWidthUint32 | S3_SAVE, ~BIT16, BIT16); - } - } -} - -/** - * azaliaInitAfterPciEnum - Config HD Audio after PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -azaliaInitAfterPciEnum ( - IN AMDSBCFG* pConfig - ) -{ - UINT8 Data; - UINT8 i; - UINT8 dbEnableAzalia; - UINT8 dbPinRouting; - UINT8 dbChannelNum; - UINT8 dbTempVariable; - UINT16 dwTempVariable; - UINT32 ddBAR0; - UINT32 ddTempVariable; - dbEnableAzalia = 0; - dbChannelNum = 0; - dbTempVariable = 0; - dwTempVariable = 0; - ddBAR0 = 0; - ddTempVariable = 0; - - if ( pConfig->AzaliaController == 1 ) { - return; - } - - if ( pConfig->AzaliaController != 1 ) { - RWPCI ((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG04, AccWidthUint8 | S3_SAVE, ~BIT1, BIT1); - if ( pConfig->BuildParameters.AzaliaSsid != 0 ) { - RWPCI ((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pConfig->BuildParameters.AzaliaSsid); - } - ReadPCI ((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG10, AccWidthUint32, &ddBAR0); - if ( ddBAR0 != 0 ) { - if ( ddBAR0 != 0xFFFFFFFF ) { - ddBAR0 &= ~(0x03FFF); - dbEnableAzalia = 1; - } - } - } - - if ( dbEnableAzalia ) { - // Get SDIN Configuration - if ( pConfig->AZALIACONFIG.AzaliaConfig.AzaliaSdin0 == 2 ) { - RWMEM (ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG167, AccWidthUint8, 0, 0x3E); - RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG167, AccWidthUint8, 0, 0x00); - } else { - RWMEM (ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG167, AccWidthUint8, 0, 0x0); - RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG167, AccWidthUint8, 0, 0x01); - } - if ( pConfig->AZALIACONFIG.AzaliaConfig.AzaliaSdin1 == 2 ) { - RWMEM (ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG168, AccWidthUint8, 0, 0x3E); - RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG168, AccWidthUint8, 0, 0x00); - } else { - RWMEM (ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG168, AccWidthUint8, 0, 0x0); - RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG168, AccWidthUint8, 0, 0x01); - } - if ( pConfig->AZALIACONFIG.AzaliaConfig.AzaliaSdin2 == 2 ) { - RWMEM (ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG169, AccWidthUint8, 0, 0x3E); - RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG169, AccWidthUint8, 0, 0x00); - } else { - RWMEM (ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG169, AccWidthUint8, 0, 0x0); - RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG169, AccWidthUint8, 0, 0x01); - } - if ( pConfig->AZALIACONFIG.AzaliaConfig.AzaliaSdin3 == 2 ) { - RWMEM (ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG170, AccWidthUint8, 0, 0x3E); - RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG170, AccWidthUint8, 0, 0x00); - } else { - RWMEM (ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG170, AccWidthUint8, 0, 0x0); - RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG170, AccWidthUint8, 0, 0x01); - } - // INT#A Azalia resource - Data = 0x93; // Azalia APIC index - WriteIO (SB_IOMAP_REGC00, AccWidthUint8, &Data); - Data = 0x10; // IRQ16 (INTA#) - WriteIO (SB_IOMAP_REGC01, AccWidthUint8, &Data); - - i = 11; - do { - ReadMEM ( ddBAR0 + SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); - dbTempVariable |= BIT0; - WriteMEM (ddBAR0 + SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); - SbStall (1000); - ReadMEM (ddBAR0 + SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); - i--; - } while ((! (dbTempVariable & BIT0)) && (i > 0) ); - - if ( i == 0 ) { - return; - } - - SbStall (1000); - ReadMEM ( ddBAR0 + SB_AZ_BAR_REG0E, AccWidthUint16, &dwTempVariable); - if ( dwTempVariable & 0x0F ) { - - //atleast one azalia codec found - // ?? E0 is not real register what we expect. we have change to GPIO/and program GPIO Mux - //ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGE0, AccWidthUint8, &dbPinRouting); - dbPinRouting = pConfig->AZALIACONFIG.AzaliaSdinPin; - do { - if ( ( ! (dbPinRouting & BIT0) ) && (dbPinRouting & BIT1) ) { -// dbChannelNum = 3; - configureAzaliaPinCmd (pConfig, ddBAR0, dbChannelNum); - } - dbPinRouting >>= 2; - dbChannelNum++; - } while ( dbChannelNum != 4 ); - } else { - //No Azalia codec found - if ( pConfig->AzaliaController != 2 ) { - dbEnableAzalia = 0; //set flag to disable Azalia - } - } - } - - if ( dbEnableAzalia ) { - //redo clear reset - do { - dwTempVariable = 0; - WriteMEM ( ddBAR0 + SB_AZ_BAR_REG0C, AccWidthUint16 | S3_SAVE, &dwTempVariable); - ReadMEM (ddBAR0 + SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); - dbTempVariable &= ~(BIT0); - WriteMEM (ddBAR0 + SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); - ReadMEM (ddBAR0 + SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); - } while ( dbTempVariable & BIT0 ); - - if ( pConfig->AzaliaSnoop == 1 ) { - RWPCI ((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG42, AccWidthUint8 | S3_SAVE, 0xFF, BIT1 + BIT0); - } - } else { - //disable Azalia controller - RWPCI ((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG04, AccWidthUint16 | S3_SAVE, 0, 0); - // RWPMIO (SB_PMIO_REG59, AccWidthUint8 | S3_SAVE, ~BIT3, 0); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEB, AccWidthUint8, ~BIT0, 0); - // RWPCI ((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGFC, AccWidthUint8 | S3_SAVE, 0, 0x55); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEB, AccWidthUint8, ~BIT0, 0); - } -} - -/** - * configureAzaliaPinCmd - Configuration HD Audio PIN Command - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * @param[in] ddBAR0 HD Audio BAR0 base address. - * @param[in] dbChannelNum Channel Number. - * - */ -VOID -configureAzaliaPinCmd ( - IN AMDSBCFG* pConfig, - IN UINT32 ddBAR0, - IN UINT8 dbChannelNum - ) -{ - UINT32 ddTempVariable; - UINT32 ddChannelNum; - CODECTBLLIST* ptempAzaliaOemCodecTablePtr; - CODECENTRY* tempAzaliaCodecEntryPtr; - - if ( (pConfig->AzaliaPinCfg) != 1 ) { - return; - } - - ddChannelNum = dbChannelNum << 28; - ddTempVariable = 0xF0000; - ddTempVariable |= ddChannelNum; - - WriteMEM (ddBAR0 + SB_AZ_BAR_REG60, AccWidthUint32 | S3_SAVE, &ddTempVariable); - SbStall (600); - ReadMEM (ddBAR0 + SB_AZ_BAR_REG64, AccWidthUint32 | S3_SAVE, &ddTempVariable); - - if ( ((pConfig->AZOEMTBL.pAzaliaOemCodecTablePtr) == NULL) || ((pConfig->AZOEMTBL.pAzaliaOemCodecTablePtr) == ((CODECTBLLIST*) (UINTN)0xFFFFFFFF))) { - ptempAzaliaOemCodecTablePtr = (CODECTBLLIST*) FIXUP_PTR (&azaliaCodecTableList[0]); - } else { - ptempAzaliaOemCodecTablePtr = (CODECTBLLIST*) pConfig->AZOEMTBL.pAzaliaOemCodecTablePtr; - } - - while ( ptempAzaliaOemCodecTablePtr->CodecID != 0xFFFFFFFF ) { - if ( ptempAzaliaOemCodecTablePtr->CodecID == ddTempVariable ) { - break; - } else { - ++ptempAzaliaOemCodecTablePtr; - } - } - - if ( ptempAzaliaOemCodecTablePtr->CodecID != 0xFFFFFFFF ) { - tempAzaliaCodecEntryPtr = (CODECENTRY*) ptempAzaliaOemCodecTablePtr->CodecTablePtr; - - if ( ((pConfig->AZOEMTBL.pAzaliaOemCodecTablePtr) == NULL) || ((pConfig->AZOEMTBL.pAzaliaOemCodecTablePtr) == ((CODECTBLLIST*) (UINTN)0xFFFFFFFF)) ) { - tempAzaliaCodecEntryPtr = (CODECENTRY*) FIXUP_PTR (tempAzaliaCodecEntryPtr); - } - configureAzaliaSetConfigD4Dword (tempAzaliaCodecEntryPtr, ddChannelNum, ddBAR0); - if ( pConfig->AzaliaFrontPanel != 1 ) { - if ( (pConfig->AzaliaFrontPanel == 2) || (pConfig->FrontPanelDetected == 1) ) { - if ( ((pConfig->AZOEMFPTBL.pAzaliaOemFpCodecTablePtr) == NULL) || ((pConfig->AZOEMFPTBL.pAzaliaOemFpCodecTablePtr) == (VOID*) (UINTN)0xFFFFFFFF) ) { - tempAzaliaCodecEntryPtr = (CODECENTRY*) FIXUP_PTR (&FrontPanelAzaliaCodecTableList[0]); - } else { - tempAzaliaCodecEntryPtr = (CODECENTRY*) pConfig->AZOEMFPTBL.pAzaliaOemFpCodecTablePtr; - } - configureAzaliaSetConfigD4Dword (tempAzaliaCodecEntryPtr, ddChannelNum, ddBAR0); - } - } - } -} - -/** - * configureAzaliaSetConfigD4Dword - Configuration HD Audio Codec table - * - * - * @param[in] tempAzaliaCodecEntryPtr HD Audio Codec table structure pointer. - * @param[in] ddChannelNum HD Audio Channel Number. - * @param[in] ddBAR0 HD Audio BAR0 base address. - * - */ -VOID -configureAzaliaSetConfigD4Dword ( - IN CODECENTRY* tempAzaliaCodecEntryPtr, - IN UINT32 ddChannelNum, - IN UINT32 ddBAR0 - ) -{ - UINT8 dbtemp1; - UINT8 dbtemp2; - UINT8 i; - UINT32 ddtemp; - UINT32 ddtemp2; - ddtemp = 0; - ddtemp2 = 0; - while ( (tempAzaliaCodecEntryPtr->Nid) != 0xFF ) { - dbtemp1 = 0x20; - if ( (tempAzaliaCodecEntryPtr->Nid) == 0x1 ) { - dbtemp1 = 0x24; - } - - ddtemp = tempAzaliaCodecEntryPtr->Nid; - ddtemp &= 0xff; - ddtemp <<= 20; - ddtemp |= ddChannelNum; - - ddtemp |= (0x700 << 8); - for ( i = 4; i > 0; i-- ) { - do { - ReadMEM (ddBAR0 + SB_AZ_BAR_REG68, AccWidthUint32, &ddtemp2); - } while ( ddtemp2 & BIT0 ); - - dbtemp2 = (UINT8) (( (tempAzaliaCodecEntryPtr->Byte40) >> ((4 - i) * 8 ) ) & 0xff); - ddtemp = (ddtemp & 0xFFFF0000) + ((dbtemp1 - i) << 8) + dbtemp2; - WriteMEM (ddBAR0 + SB_AZ_BAR_REG60, AccWidthUint32 | S3_SAVE, &ddtemp); - SbStall (60); - } - ++tempAzaliaCodecEntryPtr; - } -} - diff --git a/src/vendorcode/amd/cimx/sb800/AcpiLib.c b/src/vendorcode/amd/cimx/sb800/AcpiLib.c new file mode 100644 index 0000000..bc11209 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/AcpiLib.c @@ -0,0 +1,166 @@ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#include "SBPLATFORM.h" +#include "cbtypes.h" + +// +// +// Routine Description: +// +// Locate ACPI table +// +// Arguments: +// +// Signature - table signature +// +//Returns: +// +// pointer to ACPI table +// +// +VOID* +ACPI_LocateTable ( + IN UINT32 Signature + ) +{ + UINT32 i; + UINT32* RsdPtr; + UINT32* Rsdt; + UINTN tableOffset; + DESCRIPTION_HEADER* CurrentTable; + + RsdPtr = (UINT32*) (UINTN)0xe0000; + Rsdt = NULL; + do { + if ( *RsdPtr == Int32FromChar('R', 'S', 'D', ' ') && *(RsdPtr + 1) == Int32FromChar('P', 'T', 'R', ' ')) { + Rsdt = (UINT32*) (UINTN) ((RSDP*)RsdPtr)->RsdtAddress; + break; + } + RsdPtr += 4; + } while ( RsdPtr <= (UINT32*) (UINTN)0xffff0 ); + if ( Rsdt != NULL && ACPI_GetTableChecksum (Rsdt) == 0 ) { + for ( i = 0; i < (((DESCRIPTION_HEADER*)Rsdt)->Length - sizeof (DESCRIPTION_HEADER)) / 4; i++ ) { + tableOffset = *(UINTN*) ((UINT8*)Rsdt + sizeof (DESCRIPTION_HEADER) + i * 4); + CurrentTable = (DESCRIPTION_HEADER*)tableOffset; + if ( CurrentTable->Signature == Signature ) { + return CurrentTable; + } + } + } + return NULL; +} + +// +// +// Routine Description: +// +// Update table checksum +// +// Arguments: +// +// TablePtr - table pointer +// +// Returns: +// +// none +// +// +VOID +ACPI_SetTableChecksum ( + IN VOID* TablePtr + ) +{ + UINT8 Checksum; + Checksum = 0; + ((DESCRIPTION_HEADER*)TablePtr)->Checksum = 0; + Checksum = ACPI_GetTableChecksum (TablePtr); + ((DESCRIPTION_HEADER*)TablePtr)->Checksum = (UINT8)(0x100 - Checksum); +} + +// +// +// Routine Description: +// +// Get table checksum +// +// Arguments: +// +// TablePtr - table pointer +// +// Returns: +// +// none +// +// +UINT8 +ACPI_GetTableChecksum ( + IN VOID* TablePtr + ) +{ + return GetByteSum (TablePtr, ((DESCRIPTION_HEADER*)TablePtr)->Length); +} + + +UINT8 +GetByteSum ( + IN VOID* pData, + IN UINT32 Length + ) +{ + UINT32 i; + UINT8 Checksum; + Checksum = 0; + for ( i = 0; i < Length; i++ ) { + Checksum = Checksum + (*((UINT8*)pData + i)); + } + return Checksum; +} +VOID +GetSbAcpiMmioBase ( + OUT UINT32* AcpiMmioBase + ) +{ + UINT32 Value16; + + ReadPMIO (SB_PMIOA_REG24 + 2, AccWidthUint16, &Value16); + *AcpiMmioBase = Value16 << 16; +} + +VOID +GetSbAcpiPmBase ( + OUT UINT16* AcpiPmBase + ) +{ + ReadPMIO (SB_PMIOA_REG60, AccWidthUint16, AcpiPmBase); +} + diff --git a/src/vendorcode/amd/cimx/sb800/AcpiLib.h b/src/vendorcode/amd/cimx/sb800/AcpiLib.h new file mode 100644 index 0000000..73571f4 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/AcpiLib.h @@ -0,0 +1,69 @@ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/** + * RSDP - ACPI 2.0 table RSDP + */ +typedef struct _RSDP +{ + unsigned long long Signature; /* RSDP signature "RSD PTR" */ + unsigned char Checksum; /* checksum of the first 20 bytes */ + unsigned char OEMID[6]; /* OEM ID, "LXBIOS" */ + unsigned char Revision; /* 0 for APCI 1.0, 2 for ACPI 2.0 */ + unsigned int RsdtAddress; /* physical address of RSDT */ + unsigned int Length; /* total length of RSDP (including extended part) */ + unsigned long long XsdtAddress; /* physical address of XSDT */ + unsigned char ExtendedChecksum; /* chechsum of whole table */ + unsigned char Reserved[3]; +} RSDP; + + +/** + * DESCRIPTION_HEADER - ACPI common table header + */ +typedef struct _DESCRIPTION_HEADER +{ + unsigned int Signature; /* ACPI signature (4 ASCII characters) */ + unsigned int Length; /* Length of table, in bytes, including header */ + unsigned char Revision; /* ACPI Specification minor version # */ + unsigned char Checksum; /* To make sum of entire table == 0 */ + unsigned char OEMID[6]; /* OEM identification */ + unsigned char OEMTableID[8]; /* OEM table identification */ + unsigned int OEMRevision; /* OEM revision number */ + unsigned int CreatorID; /* ASL compiler vendor ID */ + unsigned int CreatorRevision; /* ASL compiler revision number */ +} DESCRIPTION_HEADER; + +void* ACPI_LocateTable (IN unsigned int Signature); +void ACPI_SetTableChecksum (IN void* TablePtr); +unsigned char ACPI_GetTableChecksum (IN void* TablePtr); +unsigned char GetByteSum (IN void* pData, IN unsigned int Length); diff --git a/src/vendorcode/amd/cimx/sb800/AmdLib.c b/src/vendorcode/amd/cimx/sb800/AmdLib.c new file mode 100644 index 0000000..90e9e27 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/AmdLib.c @@ -0,0 +1,92 @@ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#include "SBPLATFORM.h" +#include "cbtypes.h" + +UINT8 +getNumberOfCpuCores ( + OUT VOID + ) +{ + UINT8 Result; + Result = 1; + Result = ReadNumberOfCpuCores (); + return Result; +} + +UINT32 +readAlink ( + IN UINT32 Index + ) +{ + UINT32 Data; + WriteIO (ALINK_ACCESS_INDEX, AccWidthUint32, &Index); + ReadIO (ALINK_ACCESS_DATA, AccWidthUint32, &Data); + //Clear Index + Index = 0; + WriteIO (ALINK_ACCESS_INDEX, AccWidthUint32, &Index); + return Data; +} + +VOID +writeAlink ( + IN UINT32 Index, + IN UINT32 Data + ) +{ + WriteIO (ALINK_ACCESS_INDEX, AccWidthUint32 | S3_SAVE, &Index); + WriteIO (ALINK_ACCESS_DATA, AccWidthUint32 | S3_SAVE, &Data); + //Clear Index + Index = 0; + WriteIO (ALINK_ACCESS_INDEX, AccWidthUint32 | S3_SAVE, &Index); +} + +VOID +rwAlink ( + IN UINT32 Index, + IN UINT32 AndMask, + IN UINT32 OrMask + ) +{ + UINT32 AccesType; + AccesType = Index & 0xE0000000; + if (AccesType == (AXINDC << 29)) { + writeAlink ((SB_AX_INDXC_REG30 | AccesType), Index & 0x1FFFFFFF); + Index = (SB_AX_DATAC_REG34 | AccesType); + } else if (AccesType == (AXINDP << 29)) { + writeAlink ((SB_AX_INDXP_REG38 | AccesType), Index & 0x1FFFFFFF); + Index = (SB_AX_DATAP_REG3C | AccesType); + } + writeAlink (Index, (readAlink (Index) & AndMask) | OrMask ); +} + diff --git a/src/vendorcode/amd/cimx/sb800/AmdSbLib.c b/src/vendorcode/amd/cimx/sb800/AmdSbLib.c new file mode 100644 index 0000000..a5d92ad --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/AmdSbLib.c @@ -0,0 +1,152 @@ +/** + * @file + * + * Southbridge IO access common routine + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: CIMx-SB + * @e sub-project: + * @e $Revision:$ @e $Date:$ + * + */ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#include "SBPLATFORM.h" +#include "cbtypes.h" + +/*----------------------------------------------------------------------------------------*/ +/** + * SbStall - Delay routine + * + * + * + * @param[in] uSec + * + */ +VOID +SbStall ( + IN UINT32 uSec + ) +{ + UINT16 timerAddr; + UINT32 startTime; + UINT32 elapsedTime; + + ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG64, AccWidthUint16, &timerAddr); + if ( timerAddr == 0 ) { + uSec = uSec / 2; + while ( uSec != 0 ) { + ReadIO (0x80, AccWidthUint8, (UINT8 *) (&startTime)); + uSec--; + } + } else { + ReadIO (timerAddr, AccWidthUint32, &startTime); + for ( ;; ) { + ReadIO (timerAddr, AccWidthUint32, &elapsedTime); + if ( elapsedTime < startTime ) { + elapsedTime = elapsedTime + 0xFFFFFFFF - startTime; + } else { + elapsedTime = elapsedTime - startTime; + } + if ( (elapsedTime * 28 / 100) > uSec ) { + break; + } + } + } +} + +/*----------------------------------------------------------------------------------------*/ +/** + * SbReset - Generate a reset command + * + * + * + * @param[in] OpFlag - Dummy + * + */ +VOID +SbReset ( + IN UINT8 OpFlag + ) +{ + UINT8 Temp; + Temp = OpFlag; + RWIO (0xcf9, AccWidthUint8, 0x0, 0x06); +} + +/*----------------------------------------------------------------------------------------*/ +/** + * outPort80 - Send data to PORT 80 (debug port) + * + * + * + * @param[in] pcode - debug code (32 bits) + * + */ +VOID +outPort80 ( + IN UINT32 pcode + ) +{ + WriteIO (0x80, AccWidthUint8, &pcode); + return; +} + +/** + * AmdSbCopyMem - Memory copy + * + * @param[in] pDest - Destance address point + * @param[in] pSource - Source Address point + * @param[in] Length - Data length + * + */ +VOID +AmdSbCopyMem ( + IN VOID* pDest, + IN VOID* pSource, + IN UINTN Length + ) +{ + UINTN i; + UINT8 *Ptr; + UINT8 *Source; + Ptr = (UINT8*)pDest; + Source = (UINT8*)pSource; + for (i = 0; i < Length; i++) { + *Ptr = *Source; + Source++; + Ptr++; + } +} diff --git a/src/vendorcode/amd/cimx/sb800/AmdSbLib.h b/src/vendorcode/amd/cimx/sb800/AmdSbLib.h new file mode 100644 index 0000000..9e50bf9 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/AmdSbLib.h @@ -0,0 +1,122 @@ +/** + * @file + * + * Southbridge IO access common routine define file + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: CIMx-SB + * @e sub-project: + * @e $Revision:$ @e $Date:$ + * + */ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#ifndef __VENDORCODE_AMD_CIMX_SB800_AMDSBLIB_H__ +#define __VENDORCODE_AMD_CIMX_SB800_AMDSBLIB_H__ + +//AMDSBLIB Routines + +/** + * SbStall - Delay routine + * + * + * + * @param[in] uSec + * + */ +void SbStall (IN unsigned int uSec); + +/** + * SbReset - Generate a reset command + * + * + * + * @param[in] OpFlag - Dummy + * + */ +void SbReset (IN unsigned char OpFlag); + +/** + * outPort80 - Send data to PORT 80 (debug port) + * + * + * + * @param[in] pcode - debug code (32 bits) + * + */ +void outPort80 (IN unsigned int pcode); + +/** + * getEfuseStatue - Get Efuse status + * + * + * @param[in] Value - Return Chip strap status + * + */ +void getEfuseStatus (IN void* Value); + +/** + * AmdSbDispatcher - Dispatch Southbridge function + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +AGESA_STATUS AmdSbDispatcher (IN void *pConfig); + +/** + * AmdSbCopyMem - Memory copy + * + * @param[in] pDest - Destance address point + * @param[in] pSource - Source Address point + * @param[in] Length - Data length + * + */ +void AmdSbCopyMem (IN void* pDest, IN void* pSource, IN unsigned int Length); + + +/* SB800 CIMx and AGESA V5 can share lib functions */ +unsigned char ReadIo8(IN unsigned short Address); +unsigned short ReadIo16(IN unsigned short Address); +unsigned int ReadIo32(IN unsigned short Address); +void WriteIo8(IN unsigned short Address, IN unsigned char Data); +void WriteIo16(IN unsigned short Address, IN unsigned short Data); +void WriteIo32(IN unsigned short Address, IN unsigned int Data); +//void CpuidRead(IN unsigned int CpuidFcnAddress, OUT CPUID_DATA *Value); +void CpuidRead(unsigned int CpuidFcnAddress, CPUID_DATA *Value); +unsigned char ReadNumberOfCpuCores(void); + +#endif diff --git a/src/vendorcode/amd/cimx/sb800/Azalia.c b/src/vendorcode/amd/cimx/sb800/Azalia.c new file mode 100644 index 0000000..ccb4f90 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/Azalia.c @@ -0,0 +1,512 @@ +/** + * @file + * + * Config Southbridge HD Audio Controller + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: CIMx-SB + * @e sub-project: + * @e $Revision:$ @e $Date:$ + * + */ + +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + + +#include "SBPLATFORM.h" +#include "cbtypes.h" + +// +// Declaration of local functions +// + +VOID configureAzaliaPinCmd (IN AMDSBCFG* pConfig, IN UINT32 ddBAR0, IN UINT8 dbChannelNum); +VOID configureAzaliaSetConfigD4Dword (IN CODECENTRY* tempAzaliaCodecEntryPtr, IN UINT32 ddChannelNum, IN UINT32 ddBAR0); + +/** + * Pin Config for ALC880, ALC882 and ALC883. + * + * + * + */ +const static CODECENTRY AzaliaCodecAlc882Table[] = +{ + {0x14, 0x01014010}, + {0x15, 0x01011012}, + {0x16, 0x01016011}, + {0x17, 0x01012014}, + {0x18, 0x01A19030}, + {0x19, 0x411111F0}, + {0x1a, 0x01813080}, + {0x1b, 0x411111F0}, + {0x1C, 0x411111F0}, + {0x1d, 0x411111F0}, + {0x1e, 0x01441150}, + {0x1f, 0x01C46160}, + {0xff, 0xffffffff} +}; + +/** + * Pin Config for ALC0262. + * + * + * + */ +const static CODECENTRY AzaliaCodecAlc262Table[] = +{ + {0x14, 0x01014010}, + {0x15, 0x411111F0}, + {0x16, 0x411111F0}, + {0x18, 0x01A19830}, + {0x19, 0x02A19C40}, + {0x1a, 0x01813031}, + {0x1b, 0x02014C20}, + {0x1c, 0x411111F0}, + {0x1d, 0x411111F0}, + {0x1e, 0x0144111E}, + {0x1f, 0x01C46150}, + {0xff, 0xffffffff} +}; + +/** + * Pin Config for ALC0269. + * + * + * + */ +const static CODECENTRY AzaliaCodecAlc269Table[] = +{ + {0x12, 0x99A30960}, + {0x14, 0x99130110}, + {0x15, 0x0221401F}, + {0x16, 0x99130120}, + {0x18, 0x01A19850}, + {0x19, 0x02A15951}, + {0x1a, 0x01813052}, + {0x1b, 0x0181405F}, + {0x1d, 0x40134601}, + {0x1e, 0x01441130}, + {0x11, 0x18567140}, + {0x20, 0x0030FFFF}, + {0xff, 0xffffffff} +}; + +/** + * Pin Config for ALC0861. + * + * + * + */ +const static CODECENTRY AzaliaCodecAlc861Table[] = +{ + {0x01, 0x8086C601}, + {0x0B, 0x01014110}, + {0x0C, 0x01813140}, + {0x0D, 0x01A19941}, + {0x0E, 0x411111F0}, + {0x0F, 0x02214420}, + {0x10, 0x02A1994E}, + {0x11, 0x99330142}, + {0x12, 0x01451130}, + {0x1F, 0x411111F0}, + {0x20, 0x411111F0}, + {0x23, 0x411111F0}, + {0xff, 0xffffffff} +}; + +/** + * Pin Config for ALC0889. + * + * + * + */ +const static CODECENTRY AzaliaCodecAlc889Table[] = +{ + {0x11, 0x411111F0}, + {0x14, 0x01014010}, + {0x15, 0x01011012}, + {0x16, 0x01016011}, + {0x17, 0x01013014}, + {0x18, 0x01A19030}, + {0x19, 0x411111F0}, + {0x1a, 0x411111F0}, + {0x1b, 0x411111F0}, + {0x1C, 0x411111F0}, + {0x1d, 0x411111F0}, + {0x1e, 0x01442150}, + {0x1f, 0x01C42160}, + {0xff, 0xffffffff} +}; + +/** + * Pin Config for ADI1984. + * + * + * + */ +const static CODECENTRY AzaliaCodecAd1984Table[] = +{ + {0x11, 0x0221401F}, + {0x12, 0x90170110}, + {0x13, 0x511301F0}, + {0x14, 0x02A15020}, + {0x15, 0x50A301F0}, + {0x16, 0x593301F0}, + {0x17, 0x55A601F0}, + {0x18, 0x55A601F0}, + {0x1A, 0x91F311F0}, + {0x1B, 0x014511A0}, + {0x1C, 0x599301F0}, + {0xff, 0xffffffff} +}; + +/** + * FrontPanel Config table list + * + * + * + */ +const static CODECENTRY FrontPanelAzaliaCodecTableList[] = +{ + {0x19, 0x02A19040}, + {0x1b, 0x02214020}, + {0xff, 0xffffffff} +}; + +/** + * Current HD Audio support codec list + * + * + * + */ +const static CODECTBLLIST azaliaCodecTableList[] = +{ + {0x010ec0880, (CODECENTRY*)&AzaliaCodecAlc882Table[0]}, + {0x010ec0882, (CODECENTRY*)&AzaliaCodecAlc882Table[0]}, + {0x010ec0883, (CODECENTRY*)&AzaliaCodecAlc882Table[0]}, + {0x010ec0885, (CODECENTRY*)&AzaliaCodecAlc882Table[0]}, + {0x010ec0889, (CODECENTRY*)&AzaliaCodecAlc889Table[0]}, + {0x010ec0262, (CODECENTRY*)&AzaliaCodecAlc262Table[0]}, + {0x010ec0269, (CODECENTRY*)&AzaliaCodecAlc269Table[0]}, + {0x010ec0861, (CODECENTRY*)&AzaliaCodecAlc861Table[0]}, + {0x011d41984, (CODECENTRY*)&AzaliaCodecAd1984Table[0]}, + { (UINT32) 0x0FFFFFFFF, (CODECENTRY*) (UINTN)0x0FFFFFFFF} +}; + +/** + * azaliaInitBeforePciEnum - Config HD Audio Before PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +azaliaInitBeforePciEnum ( + IN AMDSBCFG* pConfig + ) +{ + if ( pConfig->AzaliaController == 1 ) { + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEB, AccWidthUint8, ~BIT0, 0); + } else { + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEB, AccWidthUint8, ~BIT0, BIT0); + if ( pConfig->BuildParameters.HdAudioMsi) { + RWPCI ((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG44, AccWidthUint32 | S3_SAVE, ~BIT8, BIT8); + RWPCI ((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG60, AccWidthUint32 | S3_SAVE, ~BIT16, BIT16); + } + } +} + +/** + * azaliaInitAfterPciEnum - Config HD Audio after PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +azaliaInitAfterPciEnum ( + IN AMDSBCFG* pConfig + ) +{ + UINT8 Data; + UINT8 i; + UINT8 dbEnableAzalia; + UINT8 dbPinRouting; + UINT8 dbChannelNum; + UINT8 dbTempVariable; + UINT16 dwTempVariable; + UINT32 ddBAR0; + UINT32 ddTempVariable; + dbEnableAzalia = 0; + dbChannelNum = 0; + dbTempVariable = 0; + dwTempVariable = 0; + ddBAR0 = 0; + ddTempVariable = 0; + + if ( pConfig->AzaliaController == 1 ) { + return; + } + + if ( pConfig->AzaliaController != 1 ) { + RWPCI ((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG04, AccWidthUint8 | S3_SAVE, ~BIT1, BIT1); + if ( pConfig->BuildParameters.AzaliaSsid != 0 ) { + RWPCI ((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pConfig->BuildParameters.AzaliaSsid); + } + ReadPCI ((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG10, AccWidthUint32, &ddBAR0); + if ( ddBAR0 != 0 ) { + if ( ddBAR0 != 0xFFFFFFFF ) { + ddBAR0 &= ~(0x03FFF); + dbEnableAzalia = 1; + } + } + } + + if ( dbEnableAzalia ) { + // Get SDIN Configuration + if ( pConfig->AZALIACONFIG.AzaliaConfig.AzaliaSdin0 == 2 ) { + RWMEM (ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG167, AccWidthUint8, 0, 0x3E); + RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG167, AccWidthUint8, 0, 0x00); + } else { + RWMEM (ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG167, AccWidthUint8, 0, 0x0); + RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG167, AccWidthUint8, 0, 0x01); + } + if ( pConfig->AZALIACONFIG.AzaliaConfig.AzaliaSdin1 == 2 ) { + RWMEM (ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG168, AccWidthUint8, 0, 0x3E); + RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG168, AccWidthUint8, 0, 0x00); + } else { + RWMEM (ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG168, AccWidthUint8, 0, 0x0); + RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG168, AccWidthUint8, 0, 0x01); + } + if ( pConfig->AZALIACONFIG.AzaliaConfig.AzaliaSdin2 == 2 ) { + RWMEM (ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG169, AccWidthUint8, 0, 0x3E); + RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG169, AccWidthUint8, 0, 0x00); + } else { + RWMEM (ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG169, AccWidthUint8, 0, 0x0); + RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG169, AccWidthUint8, 0, 0x01); + } + if ( pConfig->AZALIACONFIG.AzaliaConfig.AzaliaSdin3 == 2 ) { + RWMEM (ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG170, AccWidthUint8, 0, 0x3E); + RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG170, AccWidthUint8, 0, 0x00); + } else { + RWMEM (ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG170, AccWidthUint8, 0, 0x0); + RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG170, AccWidthUint8, 0, 0x01); + } + // INT#A Azalia resource + Data = 0x93; // Azalia APIC index + WriteIO (SB_IOMAP_REGC00, AccWidthUint8, &Data); + Data = 0x10; // IRQ16 (INTA#) + WriteIO (SB_IOMAP_REGC01, AccWidthUint8, &Data); + + i = 11; + do { + ReadMEM ( ddBAR0 + SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); + dbTempVariable |= BIT0; + WriteMEM (ddBAR0 + SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); + SbStall (1000); + ReadMEM (ddBAR0 + SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); + i--; + } while ((! (dbTempVariable & BIT0)) && (i > 0) ); + + if ( i == 0 ) { + return; + } + + SbStall (1000); + ReadMEM ( ddBAR0 + SB_AZ_BAR_REG0E, AccWidthUint16, &dwTempVariable); + if ( dwTempVariable & 0x0F ) { + + //atleast one azalia codec found + // ?? E0 is not real register what we expect. we have change to GPIO/and program GPIO Mux + //ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGE0, AccWidthUint8, &dbPinRouting); + dbPinRouting = pConfig->AZALIACONFIG.AzaliaSdinPin; + do { + if ( ( ! (dbPinRouting & BIT0) ) && (dbPinRouting & BIT1) ) { +// dbChannelNum = 3; + configureAzaliaPinCmd (pConfig, ddBAR0, dbChannelNum); + } + dbPinRouting >>= 2; + dbChannelNum++; + } while ( dbChannelNum != 4 ); + } else { + //No Azalia codec found + if ( pConfig->AzaliaController != 2 ) { + dbEnableAzalia = 0; //set flag to disable Azalia + } + } + } + + if ( dbEnableAzalia ) { + //redo clear reset + do { + dwTempVariable = 0; + WriteMEM ( ddBAR0 + SB_AZ_BAR_REG0C, AccWidthUint16 | S3_SAVE, &dwTempVariable); + ReadMEM (ddBAR0 + SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); + dbTempVariable &= ~(BIT0); + WriteMEM (ddBAR0 + SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); + ReadMEM (ddBAR0 + SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); + } while ( dbTempVariable & BIT0 ); + + if ( pConfig->AzaliaSnoop == 1 ) { + RWPCI ((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG42, AccWidthUint8 | S3_SAVE, 0xFF, BIT1 + BIT0); + } + } else { + //disable Azalia controller + RWPCI ((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG04, AccWidthUint16 | S3_SAVE, 0, 0); + // RWPMIO (SB_PMIO_REG59, AccWidthUint8 | S3_SAVE, ~BIT3, 0); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEB, AccWidthUint8, ~BIT0, 0); + // RWPCI ((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGFC, AccWidthUint8 | S3_SAVE, 0, 0x55); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEB, AccWidthUint8, ~BIT0, 0); + } +} + +/** + * configureAzaliaPinCmd - Configuration HD Audio PIN Command + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * @param[in] ddBAR0 HD Audio BAR0 base address. + * @param[in] dbChannelNum Channel Number. + * + */ +VOID +configureAzaliaPinCmd ( + IN AMDSBCFG* pConfig, + IN UINT32 ddBAR0, + IN UINT8 dbChannelNum + ) +{ + UINT32 ddTempVariable; + UINT32 ddChannelNum; + CODECTBLLIST* ptempAzaliaOemCodecTablePtr; + CODECENTRY* tempAzaliaCodecEntryPtr; + + if ( (pConfig->AzaliaPinCfg) != 1 ) { + return; + } + + ddChannelNum = dbChannelNum << 28; + ddTempVariable = 0xF0000; + ddTempVariable |= ddChannelNum; + + WriteMEM (ddBAR0 + SB_AZ_BAR_REG60, AccWidthUint32 | S3_SAVE, &ddTempVariable); + SbStall (600); + ReadMEM (ddBAR0 + SB_AZ_BAR_REG64, AccWidthUint32 | S3_SAVE, &ddTempVariable); + + if ( ((pConfig->AZOEMTBL.pAzaliaOemCodecTablePtr) == NULL) || ((pConfig->AZOEMTBL.pAzaliaOemCodecTablePtr) == ((CODECTBLLIST*) (UINTN)0xFFFFFFFF))) { + ptempAzaliaOemCodecTablePtr = (CODECTBLLIST*) FIXUP_PTR (&azaliaCodecTableList[0]); + } else { + ptempAzaliaOemCodecTablePtr = (CODECTBLLIST*) pConfig->AZOEMTBL.pAzaliaOemCodecTablePtr; + } + + while ( ptempAzaliaOemCodecTablePtr->CodecID != 0xFFFFFFFF ) { + if ( ptempAzaliaOemCodecTablePtr->CodecID == ddTempVariable ) { + break; + } else { + ++ptempAzaliaOemCodecTablePtr; + } + } + + if ( ptempAzaliaOemCodecTablePtr->CodecID != 0xFFFFFFFF ) { + tempAzaliaCodecEntryPtr = (CODECENTRY*) ptempAzaliaOemCodecTablePtr->CodecTablePtr; + + if ( ((pConfig->AZOEMTBL.pAzaliaOemCodecTablePtr) == NULL) || ((pConfig->AZOEMTBL.pAzaliaOemCodecTablePtr) == ((CODECTBLLIST*) (UINTN)0xFFFFFFFF)) ) { + tempAzaliaCodecEntryPtr = (CODECENTRY*) FIXUP_PTR (tempAzaliaCodecEntryPtr); + } + configureAzaliaSetConfigD4Dword (tempAzaliaCodecEntryPtr, ddChannelNum, ddBAR0); + if ( pConfig->AzaliaFrontPanel != 1 ) { + if ( (pConfig->AzaliaFrontPanel == 2) || (pConfig->FrontPanelDetected == 1) ) { + if ( ((pConfig->AZOEMFPTBL.pAzaliaOemFpCodecTablePtr) == NULL) || ((pConfig->AZOEMFPTBL.pAzaliaOemFpCodecTablePtr) == (VOID*) (UINTN)0xFFFFFFFF) ) { + tempAzaliaCodecEntryPtr = (CODECENTRY*) FIXUP_PTR (&FrontPanelAzaliaCodecTableList[0]); + } else { + tempAzaliaCodecEntryPtr = (CODECENTRY*) pConfig->AZOEMFPTBL.pAzaliaOemFpCodecTablePtr; + } + configureAzaliaSetConfigD4Dword (tempAzaliaCodecEntryPtr, ddChannelNum, ddBAR0); + } + } + } +} + +/** + * configureAzaliaSetConfigD4Dword - Configuration HD Audio Codec table + * + * + * @param[in] tempAzaliaCodecEntryPtr HD Audio Codec table structure pointer. + * @param[in] ddChannelNum HD Audio Channel Number. + * @param[in] ddBAR0 HD Audio BAR0 base address. + * + */ +VOID +configureAzaliaSetConfigD4Dword ( + IN CODECENTRY* tempAzaliaCodecEntryPtr, + IN UINT32 ddChannelNum, + IN UINT32 ddBAR0 + ) +{ + UINT8 dbtemp1; + UINT8 dbtemp2; + UINT8 i; + UINT32 ddtemp; + UINT32 ddtemp2; + ddtemp = 0; + ddtemp2 = 0; + while ( (tempAzaliaCodecEntryPtr->Nid) != 0xFF ) { + dbtemp1 = 0x20; + if ( (tempAzaliaCodecEntryPtr->Nid) == 0x1 ) { + dbtemp1 = 0x24; + } + + ddtemp = tempAzaliaCodecEntryPtr->Nid; + ddtemp &= 0xff; + ddtemp <<= 20; + ddtemp |= ddChannelNum; + + ddtemp |= (0x700 << 8); + for ( i = 4; i > 0; i-- ) { + do { + ReadMEM (ddBAR0 + SB_AZ_BAR_REG68, AccWidthUint32, &ddtemp2); + } while ( ddtemp2 & BIT0 ); + + dbtemp2 = (UINT8) (( (tempAzaliaCodecEntryPtr->Byte40) >> ((4 - i) * 8 ) ) & 0xff); + ddtemp = (ddtemp & 0xFFFF0000) + ((dbtemp1 - i) << 8) + dbtemp2; + WriteMEM (ddBAR0 + SB_AZ_BAR_REG60, AccWidthUint32 | S3_SAVE, &ddtemp); + SbStall (60); + } + ++tempAzaliaCodecEntryPtr; + } +} + diff --git a/src/vendorcode/amd/cimx/sb800/DISPATCHER.c b/src/vendorcode/amd/cimx/sb800/DISPATCHER.c deleted file mode 100644 index 8b35047..0000000 --- a/src/vendorcode/amd/cimx/sb800/DISPATCHER.c +++ /dev/null @@ -1,252 +0,0 @@ -/** - * @file - * - * Function dispatcher. - * - * - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: CIMx-SB - * @e sub-project: - * @e $Revision:$ @e $Date:$ - * - */ - -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ -/*---------------------------------------------------------------------------------------- - * M O D U L E S U S E D - *---------------------------------------------------------------------------------------- - */ - -#include "SBPLATFORM.h" -#include "cbtypes.h" - -/*---------------------------------------------------------------------------------------- - * P R O T O T Y P E S O F L O C A L F U N C T I O N S - *---------------------------------------------------------------------------------------- -*/ - - -// -// Declaration of local functions -// - -VOID saveConfigPointer (IN AMDSBCFG* pConfig); -VOID* VerifyImage (IN UINT64 Signature, IN VOID* ImagePtr); -VOID* LocateImage (IN UINT64 Signature); - -/*---------------------------------------------------------------------------------------- - * T Y P E D E F S A N D S T R U C T U R E S - *---------------------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------------------- - * E X P O R T E D F U N C T I O N S - *---------------------------------------------------------------------------------------- - */ - -/** - * AmdSbDispatcher - Dispatch Southbridge function - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -AGESA_STATUS -AmdSbDispatcher ( - IN VOID *pConfig - ) -{ - AGESA_STATUS Status; - -#ifdef B1_IMAGE - VOID *pAltImagePtr; - CIM_IMAGE_ENTRY AltImageEntry; -#endif - - UINT64 tdValue; - tdValue = 0x32314130384253ULL; - -#ifdef B1_IMAGE - pAltImagePtr = NULL; -#endif - Status = AGESA_UNSUPPORTED; - -#ifdef B1_IMAGE - if ((UINT32) (UINTN) (((AMD_CONFIG_PARAMS*)pConfig)->AltImageBasePtr) != 0xffffffff ) { - if ( ((AMD_CONFIG_PARAMS*)pConfig)->AltImageBasePtr ) { - pAltImagePtr = VerifyImage ( tdValue, (VOID*) (UINTN) ((AMD_CONFIG_PARAMS*)pConfig)->AltImageBasePtr); - } - if ( pAltImagePtr == NULL ) { - pAltImagePtr = LocateImage ( tdValue ); - } - if ( pAltImagePtr != NULL ) { - ((AMD_CONFIG_PARAMS*)pConfig)->ImageBasePtr = (UINT32) (UINTN) pAltImagePtr; - AltImageEntry = (CIM_IMAGE_ENTRY) (UINTN) ((UINT32) (UINTN) pAltImagePtr + (UINT32) (((AMD_IMAGE_HEADER*) (UINTN) pAltImagePtr)->EntryPointAddress)); - (*AltImageEntry) (pConfig); - return Status; - } - } -#endif - saveConfigPointer (pConfig); - - if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_POWERON_INIT ) { - sbPowerOnInit ((AMDSBCFG*) pConfig); - } - -#ifndef B1_IMAGE - if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_BEFORE_PCI_INIT ) { - sbBeforePciInit ((AMDSBCFG*)pConfig); - } - - if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_AFTER_PCI_INIT ) { - sbAfterPciInit ((AMDSBCFG*)pConfig); - } - - if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_MID_POST_INIT ) { - sbMidPostInit ((AMDSBCFG*)pConfig); - } - - if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_LATE_POST_INIT ) { - sbLatePost ((AMDSBCFG*)pConfig); - } - - if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_BEFORE_PCI_RESTORE_INIT ) { - sbBeforePciRestoreInit ((AMDSBCFG*)pConfig); - } - - if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_AFTER_PCI_RESTORE_INIT ) { - sbAfterPciRestoreInit ((AMDSBCFG*)pConfig); - } - - if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_SMM_SERVICE ) { - sbSmmService ((AMDSBCFG*)pConfig); - } - - if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_SMM_ACPION ) { - sbSmmAcpiOn ((AMDSBCFG*)pConfig); - } - - if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_EC_FANCONTROL ) { - sbECfancontrolservice((AMDSBCFG*)pConfig); - } -#endif - return Status; -} - -/** - * LocateImage - Locate Southbridge CIMx module - * - * - * - * @param[in] Signature Southbridge CIMx image signature. - * - */ -VOID* -LocateImage ( - IN UINT64 Signature - ) -{ - VOID *Result; - UINT32 ImagePtr; - ImagePtr = 0xffffffff - (IMAGE_ALIGN - 1); - - while ( ImagePtr >= (0xfffffff - (NUM_IMAGE_LOCATION * IMAGE_ALIGN - 1)) ) { - Result = VerifyImage (Signature, (VOID*)(UINTN)ImagePtr); - if ( Result != NULL ) { - return Result; - } - ImagePtr -= IMAGE_ALIGN; - } - return NULL; -} - -/** - * VerifyImage - Verify Southbridge CIMx module - * - * - * @param[in] Signature Southbridge CIMx image signature. - * @param[in] ImagePtr Southbridge CIMx image address. - * - */ -VOID* -VerifyImage ( - IN UINT64 Signature, - IN VOID* ImagePtr - ) -{ - UINT16 *TempImagePtr; - UINT16 Sum; - UINT32 i; - Sum = 0; - if ( (*((UINT32*)ImagePtr) == Int32FromChar('$', 'A', 'M', 'D') && ((CIMFILEHEADER*)ImagePtr)->CreatorID == Signature) ) { - //GetImage Image size - TempImagePtr = (UINT16*)ImagePtr; - for ( i = 0; i < (((CIMFILEHEADER*)ImagePtr)->ImageSize); i += 2 ) { - Sum = Sum + *TempImagePtr; - TempImagePtr++; - } - if ( Sum == 0 ) { - return ImagePtr; - } - } - return NULL; -} - -/** - * saveConfigPointer - Verify Southbridge CIMx module - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -saveConfigPointer ( - IN AMDSBCFG* pConfig - ) -{ - UINT8 dbReg; - UINT8 i; - UINT32 ddValue; - - ddValue = (UINT32) (UINTN)pConfig; // Needs to live below 4G - dbReg = SB_ECMOS_REG08; - - for ( i = 0; i <= 3; i++ ) { - WriteIO (SB_IOMAP_REG72, AccWidthUint8, &dbReg); - WriteIO (SB_IOMAP_REG73, AccWidthUint8, (UINT8*)&ddValue); - ddValue = (ddValue >> 8); - dbReg++; - } -} diff --git a/src/vendorcode/amd/cimx/sb800/Dispatcher.c b/src/vendorcode/amd/cimx/sb800/Dispatcher.c new file mode 100644 index 0000000..8b35047 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/Dispatcher.c @@ -0,0 +1,252 @@ +/** + * @file + * + * Function dispatcher. + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: CIMx-SB + * @e sub-project: + * @e $Revision:$ @e $Date:$ + * + */ + +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ +/*---------------------------------------------------------------------------------------- + * M O D U L E S U S E D + *---------------------------------------------------------------------------------------- + */ + +#include "SBPLATFORM.h" +#include "cbtypes.h" + +/*---------------------------------------------------------------------------------------- + * P R O T O T Y P E S O F L O C A L F U N C T I O N S + *---------------------------------------------------------------------------------------- +*/ + + +// +// Declaration of local functions +// + +VOID saveConfigPointer (IN AMDSBCFG* pConfig); +VOID* VerifyImage (IN UINT64 Signature, IN VOID* ImagePtr); +VOID* LocateImage (IN UINT64 Signature); + +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S A N D S T R U C T U R E S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * E X P O R T E D F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/** + * AmdSbDispatcher - Dispatch Southbridge function + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +AGESA_STATUS +AmdSbDispatcher ( + IN VOID *pConfig + ) +{ + AGESA_STATUS Status; + +#ifdef B1_IMAGE + VOID *pAltImagePtr; + CIM_IMAGE_ENTRY AltImageEntry; +#endif + + UINT64 tdValue; + tdValue = 0x32314130384253ULL; + +#ifdef B1_IMAGE + pAltImagePtr = NULL; +#endif + Status = AGESA_UNSUPPORTED; + +#ifdef B1_IMAGE + if ((UINT32) (UINTN) (((AMD_CONFIG_PARAMS*)pConfig)->AltImageBasePtr) != 0xffffffff ) { + if ( ((AMD_CONFIG_PARAMS*)pConfig)->AltImageBasePtr ) { + pAltImagePtr = VerifyImage ( tdValue, (VOID*) (UINTN) ((AMD_CONFIG_PARAMS*)pConfig)->AltImageBasePtr); + } + if ( pAltImagePtr == NULL ) { + pAltImagePtr = LocateImage ( tdValue ); + } + if ( pAltImagePtr != NULL ) { + ((AMD_CONFIG_PARAMS*)pConfig)->ImageBasePtr = (UINT32) (UINTN) pAltImagePtr; + AltImageEntry = (CIM_IMAGE_ENTRY) (UINTN) ((UINT32) (UINTN) pAltImagePtr + (UINT32) (((AMD_IMAGE_HEADER*) (UINTN) pAltImagePtr)->EntryPointAddress)); + (*AltImageEntry) (pConfig); + return Status; + } + } +#endif + saveConfigPointer (pConfig); + + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_POWERON_INIT ) { + sbPowerOnInit ((AMDSBCFG*) pConfig); + } + +#ifndef B1_IMAGE + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_BEFORE_PCI_INIT ) { + sbBeforePciInit ((AMDSBCFG*)pConfig); + } + + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_AFTER_PCI_INIT ) { + sbAfterPciInit ((AMDSBCFG*)pConfig); + } + + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_MID_POST_INIT ) { + sbMidPostInit ((AMDSBCFG*)pConfig); + } + + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_LATE_POST_INIT ) { + sbLatePost ((AMDSBCFG*)pConfig); + } + + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_BEFORE_PCI_RESTORE_INIT ) { + sbBeforePciRestoreInit ((AMDSBCFG*)pConfig); + } + + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_AFTER_PCI_RESTORE_INIT ) { + sbAfterPciRestoreInit ((AMDSBCFG*)pConfig); + } + + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_SMM_SERVICE ) { + sbSmmService ((AMDSBCFG*)pConfig); + } + + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_SMM_ACPION ) { + sbSmmAcpiOn ((AMDSBCFG*)pConfig); + } + + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_EC_FANCONTROL ) { + sbECfancontrolservice((AMDSBCFG*)pConfig); + } +#endif + return Status; +} + +/** + * LocateImage - Locate Southbridge CIMx module + * + * + * + * @param[in] Signature Southbridge CIMx image signature. + * + */ +VOID* +LocateImage ( + IN UINT64 Signature + ) +{ + VOID *Result; + UINT32 ImagePtr; + ImagePtr = 0xffffffff - (IMAGE_ALIGN - 1); + + while ( ImagePtr >= (0xfffffff - (NUM_IMAGE_LOCATION * IMAGE_ALIGN - 1)) ) { + Result = VerifyImage (Signature, (VOID*)(UINTN)ImagePtr); + if ( Result != NULL ) { + return Result; + } + ImagePtr -= IMAGE_ALIGN; + } + return NULL; +} + +/** + * VerifyImage - Verify Southbridge CIMx module + * + * + * @param[in] Signature Southbridge CIMx image signature. + * @param[in] ImagePtr Southbridge CIMx image address. + * + */ +VOID* +VerifyImage ( + IN UINT64 Signature, + IN VOID* ImagePtr + ) +{ + UINT16 *TempImagePtr; + UINT16 Sum; + UINT32 i; + Sum = 0; + if ( (*((UINT32*)ImagePtr) == Int32FromChar('$', 'A', 'M', 'D') && ((CIMFILEHEADER*)ImagePtr)->CreatorID == Signature) ) { + //GetImage Image size + TempImagePtr = (UINT16*)ImagePtr; + for ( i = 0; i < (((CIMFILEHEADER*)ImagePtr)->ImageSize); i += 2 ) { + Sum = Sum + *TempImagePtr; + TempImagePtr++; + } + if ( Sum == 0 ) { + return ImagePtr; + } + } + return NULL; +} + +/** + * saveConfigPointer - Verify Southbridge CIMx module + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +saveConfigPointer ( + IN AMDSBCFG* pConfig + ) +{ + UINT8 dbReg; + UINT8 i; + UINT32 ddValue; + + ddValue = (UINT32) (UINTN)pConfig; // Needs to live below 4G + dbReg = SB_ECMOS_REG08; + + for ( i = 0; i <= 3; i++ ) { + WriteIO (SB_IOMAP_REG72, AccWidthUint8, &dbReg); + WriteIO (SB_IOMAP_REG73, AccWidthUint8, (UINT8*)&ddValue); + ddValue = (ddValue >> 8); + dbReg++; + } +} diff --git a/src/vendorcode/amd/cimx/sb800/EC.c b/src/vendorcode/amd/cimx/sb800/EC.c deleted file mode 100644 index 9e70e8b..0000000 --- a/src/vendorcode/amd/cimx/sb800/EC.c +++ /dev/null @@ -1,131 +0,0 @@ - -/** - * @file - * - * Config Southbridge EC Controller - * - * Init EC features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: CIMx-SB - * @e sub-project: - * @e $Revision:$ @e $Date:$ - * - */ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#include "SBPLATFORM.h" -#include "cbtypes.h" - -#ifndef NO_EC_SUPPORT - -/** - * Config EC controller during power-on - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -ecPowerOnInit ( - IN AMDSBCFG* pConfig - ) -{ - //Enable config mode - EnterEcConfig (); - - //Do settings for mailbox - logical device 0x09 - RWEC8 (0x07, 0x00, 0x09); //switch to device 9 (Mailbox) - RWEC8 (0x60, 0x00, (MailBoxPort >> 8)); //set MSB of Mailbox port - RWEC8 (0x61, 0x00, (MailBoxPort & 0xFF)); //set LSB of Mailbox port - RWEC8 (0x30, 0x00, 0x01); //;Enable Mailbox Registers Interface, bit0=1 - - if ( pConfig->BuildParameters.EcKbd == CIMX_OPTION_ENABLED) { - //Enable KBRST#, IRQ1 & IRQ12, GateA20 Function signal from IMC - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGD6, AccWidthUint8, ~BIT8, BIT0 + BIT1 + BIT2 + BIT3); - - //Disable LPC Decoding of port 60/64 - RWPCI (((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG47), AccWidthUint8 | S3_SAVE, ~BIT5, 0); - - //Enable logical device 0x07 (Keyboard controller) - RWEC8 (0x07, 0x00, 0x07); - RWEC8 (0x30, 0x00, 0x01); - } - - if ( pConfig->BuildParameters.EcChannel0 == CIMX_OPTION_ENABLED) { - //Logical device 0x03 - RWEC8 (0x07, 0x00, 0x03); - RWEC8 (0x60, 0x00, 0x00); - RWEC8 (0x61, 0x00, 0x62); - RWEC8 (0x30, 0x00, 0x01); //;Enable Device 8 - } - - //Enable EC (IMC) to generate SMI to BIOS - RWMEM (ACPI_MMIO_BASE + SMI_BASE + SB_SMI_REGB3, AccWidthUint8, ~BIT6, BIT6); - ExitEcConfig (); -} - -/** - * Config EC controller before PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -ecInitBeforePciEnum ( - IN AMDSBCFG* pConfig - ) -{ - AMDSBCFG* pTmp; // dummy code - pTmp = pConfig; -} - -/** - * Prepare EC controller to boot to OS. - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -ecInitLatePost ( - IN AMDSBCFG* pConfig - ) -{ - AMDSBCFG* pTmp; // dummy code - pTmp = pConfig; -} -#endif diff --git a/src/vendorcode/amd/cimx/sb800/ECLIB.c b/src/vendorcode/amd/cimx/sb800/ECLIB.c deleted file mode 100644 index 54d87e7..0000000 --- a/src/vendorcode/amd/cimx/sb800/ECLIB.c +++ /dev/null @@ -1,156 +0,0 @@ -/** - * @file - * - * Southbridge EC IO access common routine - * - */ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#include "SBPLATFORM.h" -#include "cbtypes.h" - -// #ifndef NO_EC_SUPPORT - -/*----------------------------------------------------------------------------------------*/ -/** - * EnterEcConfig - Force EC into Config mode - * - * - * - * - */ -VOID -EnterEcConfig ( - ) -{ - UINT16 dwEcIndexPort; - - ReadPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwEcIndexPort); - dwEcIndexPort &= ~(BIT0); - RWIO (dwEcIndexPort, AccWidthUint8, 0x00, 0x5A); -} - -/*----------------------------------------------------------------------------------------*/ -/** - * ExitEcConfig - Force EC exit Config mode - * - * - * - * - */ -VOID -ExitEcConfig ( - ) -{ - UINT16 dwEcIndexPort; - - ReadPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwEcIndexPort); - dwEcIndexPort &= ~(BIT0); - RWIO (dwEcIndexPort, AccWidthUint8, 0x00, 0xA5); -} - -/*----------------------------------------------------------------------------------------*/ -/** - * ReadEC8 - Read EC register data - * - * - * - * @param[in] Address - EC Register Offset Value - * @param[in] Value - Read Data Buffer - * - */ -VOID -ReadEC8 ( - IN UINT8 Address, - IN UINT8* Value - ) -{ - UINT16 dwEcIndexPort; - - ReadPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwEcIndexPort); - dwEcIndexPort &= ~(BIT0); - WriteIO (dwEcIndexPort, AccWidthUint8, &Address); - ReadIO (dwEcIndexPort + 1, AccWidthUint8, Value); -} - -/*----------------------------------------------------------------------------------------*/ -/** - * WriteEC8 - Write date into EC register - * - * - * - * @param[in] Address - EC Register Offset Value - * @param[in] Value - Write Data Buffer - * - */ -VOID -WriteEC8 ( - IN UINT8 Address, - IN UINT8* Value - ) -{ - UINT16 dwEcIndexPort; - - ReadPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwEcIndexPort); - dwEcIndexPort &= ~(BIT0); - - WriteIO (dwEcIndexPort, AccWidthUint8, &Address); - WriteIO (dwEcIndexPort + 1, AccWidthUint8, Value); -} - -/*----------------------------------------------------------------------------------------*/ -/** - * RWEC8 - Read/Write EC register - * - * - * - * @param[in] Address - EC Register Offset Value - * @param[in] AndMask - Data And Mask 8 bits - * @param[in] OrMask - Data OR Mask 8 bits - * - */ -VOID -RWEC8 ( - IN UINT8 Address, - IN UINT8 AndMask, - IN UINT8 OrMask - ) -{ - UINT8 Result; - ReadEC8 (Address, &Result); - Result = (Result & AndMask) | OrMask; - WriteEC8 (Address, &Result); -} - -// #endif - diff --git a/src/vendorcode/amd/cimx/sb800/ECfan.h b/src/vendorcode/amd/cimx/sb800/ECfan.h deleted file mode 100644 index 3fd5fea..0000000 --- a/src/vendorcode/amd/cimx/sb800/ECfan.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#include "cbtypes.h" - -VOID WriteECmsg (IN UINT8 Address, IN UINT8 OpFlag, IN VOID* Value); -VOID WaitForEcLDN9MailboxCmdAck (VOID); -VOID ReadECmsg (IN UINT8 Address, IN UINT8 OpFlag, OUT VOID* Value); - -// IMC Message Register Software Interface -#define CPU_MISC_BUS_DEV_FUN ((0x18 << 3) + 3) - -#define MSG_SYS_TO_IMC 0x80 -#define Fun_80 0x80 -#define Fun_81 0x81 -#define Fun_82 0x82 -#define Fun_83 0x83 -#define Fun_84 0x84 -#define Fun_85 0x85 -#define Fun_86 0x86 -#define Fun_87 0x87 -#define Fun_88 0x88 -#define Fun_89 0x89 -#define Fun_90 0x90 -#define MSG_IMC_TO_SYS 0x81 -#define MSG_REG0 0x82 -#define MSG_REG1 0x83 -#define MSG_REG2 0x84 -#define MSG_REG3 0x85 -#define MSG_REG4 0x86 -#define MSG_REG5 0x87 -#define MSG_REG6 0x88 -#define MSG_REG7 0x89 -#define MSG_REG8 0x8A -#define MSG_REG9 0x8B -#define MSG_REGA 0x8C -#define MSG_REGB 0x8D -#define MSG_REGC 0x8E -#define MSG_REGD 0x8F - - diff --git a/src/vendorcode/amd/cimx/sb800/ECfanLIB.c b/src/vendorcode/amd/cimx/sb800/ECfanLIB.c deleted file mode 100644 index 9ac6c88..0000000 --- a/src/vendorcode/amd/cimx/sb800/ECfanLIB.c +++ /dev/null @@ -1,96 +0,0 @@ -/** - * @file - * - * Southbridge EC IO access common routine - * - */ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#include "SBPLATFORM.h" -#include "ECfan.h" - -VOID -ReadECmsg ( - IN UINT8 Address, - IN UINT8 OpFlag, - OUT VOID* Value - ) -{ - UINT8 i; - - OpFlag = OpFlag & 0x7f; - if (OpFlag == 0x02) OpFlag = 0x03; - for (i = 0; i <= OpFlag; i++) { - WriteIO(MailBoxPort, AccWidthUint8, &Address); // EC_LDN9_MAILBOX_BASE_ADDRESS - Address++; - ReadIO(MailBoxPort + 1, AccWidthUint8, (UINT8 *)Value+i); // EC_LDN9_MAILBOX_BASE_ADDRESS - } -} - - -VOID -WriteECmsg ( - IN UINT8 Address, - IN UINT8 OpFlag, - IN VOID* Value - ) -{ - UINT8 i; - - OpFlag = OpFlag & 0x7f; - if (OpFlag == 0x02) OpFlag = 0x03; - for (i = 0; i <= OpFlag; i++) { - WriteIO(MailBoxPort, AccWidthUint8, &Address); // EC_LDN9_MAILBOX_BASE_ADDRESS - Address++; - WriteIO(MailBoxPort + 1, AccWidthUint8, (UINT8 *)Value+i); // EC_LDN9_MAILBOX_BASE_ADDRESS - } -} - -VOID -WaitForEcLDN9MailboxCmdAck ( - VOID - ) -{ - UINT8 Msgdata; - UINT16 Delaytime; - Msgdata = 0; - for (Delaytime = 0; Delaytime <= 500; Delaytime++) { - ReadECmsg (MSG_REG0, AccWidthUint8, &Msgdata); - if ( Msgdata == 0xfa) { - break; - } - SbStall (1000); // Wait for 1ms - } -} - - diff --git a/src/vendorcode/amd/cimx/sb800/ECfanc.c b/src/vendorcode/amd/cimx/sb800/ECfanc.c deleted file mode 100644 index 7e679c9..0000000 --- a/src/vendorcode/amd/cimx/sb800/ECfanc.c +++ /dev/null @@ -1,204 +0,0 @@ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - - -#include "SBPLATFORM.h" -#include "ECfan.h" -/** - * Table for Function Number - * - * - * - * - */ -const static UINT8 FunctionNumber[] = -{ - Fun_81, - Fun_83, - Fun_85, - Fun_89, -}; - -/** - * Table for Max Thermal Zone - * - * - * - * - */ -const static UINT8 MaxZone[] = -{ - 4, - 4, - 4, - 4, -}; - -/** - * Table for Max Register - * - * - * - * - */ -const static UINT8 MaxRegister[] = -{ - MSG_REG9, - MSG_REGB, - MSG_REG9, - MSG_REGA, -}; - -/*------------------------------------------------------------------------------- -;Procedure: IsZoneFuncEnable -; -;Description: This routine will check every zone support function with BitMap from user define -; -; -;Exit: None -; -;Modified: None -; -;----------------------------------------------------------------------------- -*/ -BOOLEAN -IsZoneFuncEnable ( - UINT16 Flag, - UINT8 func, - UINT8 Zone -) -{ - return (BOOLEAN)(((Flag >> (func *4)) & 0xF) & ((UINT8 )1 << Zone)); -} - -/*------------------------------------------------------------------------------- -;Procedure: sbECfancontrolservice -; -;Description: This routine service EC fan policy -; -; -;Exit: None -; -;Modified: None -; -;----------------------------------------------------------------------------- -*/ -VOID -sbECfancontrolservice ( - IN AMDSBCFG* pConfig - ) -{ - UINT8 ZoneNum; - UINT8 FunNum; - UINT8 RegNum; - UINT8 * CurPoint; - UINT8 FunIndex; - BOOLEAN IsSendEcMsg; - - CurPoint = &pConfig->Pecstruct.MSGFun81zone0MSGREG0 + MaxZone[0] * (MaxRegister[0] - MSG_REG0 + 1); - for ( FunIndex = 1; FunIndex <= 3; FunIndex++ ) { - FunNum = FunctionNumber[FunIndex]; - for ( ZoneNum = 0; ZoneNum < MaxZone[FunIndex]; ZoneNum++ ) { - IsSendEcMsg = IsZoneFuncEnable (pConfig->Pecstruct.IMCFUNSupportBitMap, FunIndex, ZoneNum); - for ( RegNum = MSG_REG0; RegNum <= MaxRegister[FunIndex]; RegNum++ ) { - if (IsSendEcMsg) { - WriteECmsg (RegNum, AccWidthUint8, CurPoint); // - } - CurPoint += 1; - } - if (IsSendEcMsg) { - WriteECmsg (MSG_SYS_TO_IMC, AccWidthUint8, &FunNum); // function number - WaitForEcLDN9MailboxCmdAck (); - } - } - } - CurPoint = &pConfig->Pecstruct.MSGFun81zone0MSGREG0; - for ( FunIndex = 0; FunIndex <= 0; FunIndex++ ) { - FunNum = FunctionNumber[FunIndex]; - for ( ZoneNum = 0; ZoneNum < MaxZone[FunIndex]; ZoneNum++ ) { - IsSendEcMsg = IsZoneFuncEnable (pConfig->Pecstruct.IMCFUNSupportBitMap, FunIndex, ZoneNum); - for ( RegNum = MSG_REG0; RegNum <= MaxRegister[FunIndex]; RegNum++ ) { - if (IsSendEcMsg) { - WriteECmsg (RegNum, AccWidthUint8, CurPoint); // - } - CurPoint += 1; - } - if (IsSendEcMsg) { - WriteECmsg (MSG_SYS_TO_IMC, AccWidthUint8, &FunNum); // function number - WaitForEcLDN9MailboxCmdAck (); - } - } - } -} - -/*------------------------------------------------------------------------------- -;Procedure: SBIMCFanInitializeS3 -; -;Description: This routine initialize IMC fan when S3 resume -; -; -;Exit: None -; -;Modified: None -; -;----------------------------------------------------------------------------- -*/ -VOID -SBIMCFanInitializeS3 (VOID) -{ - UINT8 dbPortStatus,Value80,Value82,Value83,Value84; - - getChipSysMode (&dbPortStatus); - if ((dbPortStatus & ChipSysEcEnable) != 0) { - Value80 = 0x98; - Value82 = 0x00; - Value83 = 0x02; - Value84 = 0x00; - - // Clear MSG_REG0 to receive acknowledge byte - WriteECmsg (MSG_REG0, AccWidthUint8, &Value82); - - // Set MSG_REG1 - // 0x02 - Notify IMC that the system is waken from any sleep state - WriteECmsg (MSG_REG1, AccWidthUint8, &Value83); - - // Set timeout counter value to 00 which disables watchdog timer - WriteECmsg (MSG_REG2, AccWidthUint8, &Value84); - - // Write mailbox function number to kick off the command - // 0x98 - IMC System Sleep and Wake Services - WriteECmsg (MSG_SYS_TO_IMC, AccWidthUint8, &Value80); - - // Read acknowledge byte to make sure function is executed properly - WaitForEcLDN9MailboxCmdAck (); - } -} diff --git a/src/vendorcode/amd/cimx/sb800/Ec.c b/src/vendorcode/amd/cimx/sb800/Ec.c new file mode 100644 index 0000000..9e70e8b --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/Ec.c @@ -0,0 +1,131 @@ + +/** + * @file + * + * Config Southbridge EC Controller + * + * Init EC features. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: CIMx-SB + * @e sub-project: + * @e $Revision:$ @e $Date:$ + * + */ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#include "SBPLATFORM.h" +#include "cbtypes.h" + +#ifndef NO_EC_SUPPORT + +/** + * Config EC controller during power-on + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +ecPowerOnInit ( + IN AMDSBCFG* pConfig + ) +{ + //Enable config mode + EnterEcConfig (); + + //Do settings for mailbox - logical device 0x09 + RWEC8 (0x07, 0x00, 0x09); //switch to device 9 (Mailbox) + RWEC8 (0x60, 0x00, (MailBoxPort >> 8)); //set MSB of Mailbox port + RWEC8 (0x61, 0x00, (MailBoxPort & 0xFF)); //set LSB of Mailbox port + RWEC8 (0x30, 0x00, 0x01); //;Enable Mailbox Registers Interface, bit0=1 + + if ( pConfig->BuildParameters.EcKbd == CIMX_OPTION_ENABLED) { + //Enable KBRST#, IRQ1 & IRQ12, GateA20 Function signal from IMC + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGD6, AccWidthUint8, ~BIT8, BIT0 + BIT1 + BIT2 + BIT3); + + //Disable LPC Decoding of port 60/64 + RWPCI (((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG47), AccWidthUint8 | S3_SAVE, ~BIT5, 0); + + //Enable logical device 0x07 (Keyboard controller) + RWEC8 (0x07, 0x00, 0x07); + RWEC8 (0x30, 0x00, 0x01); + } + + if ( pConfig->BuildParameters.EcChannel0 == CIMX_OPTION_ENABLED) { + //Logical device 0x03 + RWEC8 (0x07, 0x00, 0x03); + RWEC8 (0x60, 0x00, 0x00); + RWEC8 (0x61, 0x00, 0x62); + RWEC8 (0x30, 0x00, 0x01); //;Enable Device 8 + } + + //Enable EC (IMC) to generate SMI to BIOS + RWMEM (ACPI_MMIO_BASE + SMI_BASE + SB_SMI_REGB3, AccWidthUint8, ~BIT6, BIT6); + ExitEcConfig (); +} + +/** + * Config EC controller before PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +ecInitBeforePciEnum ( + IN AMDSBCFG* pConfig + ) +{ + AMDSBCFG* pTmp; // dummy code + pTmp = pConfig; +} + +/** + * Prepare EC controller to boot to OS. + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +ecInitLatePost ( + IN AMDSBCFG* pConfig + ) +{ + AMDSBCFG* pTmp; // dummy code + pTmp = pConfig; +} +#endif diff --git a/src/vendorcode/amd/cimx/sb800/EcFan.h b/src/vendorcode/amd/cimx/sb800/EcFan.h new file mode 100644 index 0000000..3fd5fea --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/EcFan.h @@ -0,0 +1,70 @@ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#include "cbtypes.h" + +VOID WriteECmsg (IN UINT8 Address, IN UINT8 OpFlag, IN VOID* Value); +VOID WaitForEcLDN9MailboxCmdAck (VOID); +VOID ReadECmsg (IN UINT8 Address, IN UINT8 OpFlag, OUT VOID* Value); + +// IMC Message Register Software Interface +#define CPU_MISC_BUS_DEV_FUN ((0x18 << 3) + 3) + +#define MSG_SYS_TO_IMC 0x80 +#define Fun_80 0x80 +#define Fun_81 0x81 +#define Fun_82 0x82 +#define Fun_83 0x83 +#define Fun_84 0x84 +#define Fun_85 0x85 +#define Fun_86 0x86 +#define Fun_87 0x87 +#define Fun_88 0x88 +#define Fun_89 0x89 +#define Fun_90 0x90 +#define MSG_IMC_TO_SYS 0x81 +#define MSG_REG0 0x82 +#define MSG_REG1 0x83 +#define MSG_REG2 0x84 +#define MSG_REG3 0x85 +#define MSG_REG4 0x86 +#define MSG_REG5 0x87 +#define MSG_REG6 0x88 +#define MSG_REG7 0x89 +#define MSG_REG8 0x8A +#define MSG_REG9 0x8B +#define MSG_REGA 0x8C +#define MSG_REGB 0x8D +#define MSG_REGC 0x8E +#define MSG_REGD 0x8F + + diff --git a/src/vendorcode/amd/cimx/sb800/EcFanLib.c b/src/vendorcode/amd/cimx/sb800/EcFanLib.c new file mode 100644 index 0000000..9ac6c88 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/EcFanLib.c @@ -0,0 +1,96 @@ +/** + * @file + * + * Southbridge EC IO access common routine + * + */ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#include "SBPLATFORM.h" +#include "ECfan.h" + +VOID +ReadECmsg ( + IN UINT8 Address, + IN UINT8 OpFlag, + OUT VOID* Value + ) +{ + UINT8 i; + + OpFlag = OpFlag & 0x7f; + if (OpFlag == 0x02) OpFlag = 0x03; + for (i = 0; i <= OpFlag; i++) { + WriteIO(MailBoxPort, AccWidthUint8, &Address); // EC_LDN9_MAILBOX_BASE_ADDRESS + Address++; + ReadIO(MailBoxPort + 1, AccWidthUint8, (UINT8 *)Value+i); // EC_LDN9_MAILBOX_BASE_ADDRESS + } +} + + +VOID +WriteECmsg ( + IN UINT8 Address, + IN UINT8 OpFlag, + IN VOID* Value + ) +{ + UINT8 i; + + OpFlag = OpFlag & 0x7f; + if (OpFlag == 0x02) OpFlag = 0x03; + for (i = 0; i <= OpFlag; i++) { + WriteIO(MailBoxPort, AccWidthUint8, &Address); // EC_LDN9_MAILBOX_BASE_ADDRESS + Address++; + WriteIO(MailBoxPort + 1, AccWidthUint8, (UINT8 *)Value+i); // EC_LDN9_MAILBOX_BASE_ADDRESS + } +} + +VOID +WaitForEcLDN9MailboxCmdAck ( + VOID + ) +{ + UINT8 Msgdata; + UINT16 Delaytime; + Msgdata = 0; + for (Delaytime = 0; Delaytime <= 500; Delaytime++) { + ReadECmsg (MSG_REG0, AccWidthUint8, &Msgdata); + if ( Msgdata == 0xfa) { + break; + } + SbStall (1000); // Wait for 1ms + } +} + + diff --git a/src/vendorcode/amd/cimx/sb800/EcFanc.c b/src/vendorcode/amd/cimx/sb800/EcFanc.c new file mode 100644 index 0000000..7e679c9 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/EcFanc.c @@ -0,0 +1,204 @@ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + + +#include "SBPLATFORM.h" +#include "ECfan.h" +/** + * Table for Function Number + * + * + * + * + */ +const static UINT8 FunctionNumber[] = +{ + Fun_81, + Fun_83, + Fun_85, + Fun_89, +}; + +/** + * Table for Max Thermal Zone + * + * + * + * + */ +const static UINT8 MaxZone[] = +{ + 4, + 4, + 4, + 4, +}; + +/** + * Table for Max Register + * + * + * + * + */ +const static UINT8 MaxRegister[] = +{ + MSG_REG9, + MSG_REGB, + MSG_REG9, + MSG_REGA, +}; + +/*------------------------------------------------------------------------------- +;Procedure: IsZoneFuncEnable +; +;Description: This routine will check every zone support function with BitMap from user define +; +; +;Exit: None +; +;Modified: None +; +;----------------------------------------------------------------------------- +*/ +BOOLEAN +IsZoneFuncEnable ( + UINT16 Flag, + UINT8 func, + UINT8 Zone +) +{ + return (BOOLEAN)(((Flag >> (func *4)) & 0xF) & ((UINT8 )1 << Zone)); +} + +/*------------------------------------------------------------------------------- +;Procedure: sbECfancontrolservice +; +;Description: This routine service EC fan policy +; +; +;Exit: None +; +;Modified: None +; +;----------------------------------------------------------------------------- +*/ +VOID +sbECfancontrolservice ( + IN AMDSBCFG* pConfig + ) +{ + UINT8 ZoneNum; + UINT8 FunNum; + UINT8 RegNum; + UINT8 * CurPoint; + UINT8 FunIndex; + BOOLEAN IsSendEcMsg; + + CurPoint = &pConfig->Pecstruct.MSGFun81zone0MSGREG0 + MaxZone[0] * (MaxRegister[0] - MSG_REG0 + 1); + for ( FunIndex = 1; FunIndex <= 3; FunIndex++ ) { + FunNum = FunctionNumber[FunIndex]; + for ( ZoneNum = 0; ZoneNum < MaxZone[FunIndex]; ZoneNum++ ) { + IsSendEcMsg = IsZoneFuncEnable (pConfig->Pecstruct.IMCFUNSupportBitMap, FunIndex, ZoneNum); + for ( RegNum = MSG_REG0; RegNum <= MaxRegister[FunIndex]; RegNum++ ) { + if (IsSendEcMsg) { + WriteECmsg (RegNum, AccWidthUint8, CurPoint); // + } + CurPoint += 1; + } + if (IsSendEcMsg) { + WriteECmsg (MSG_SYS_TO_IMC, AccWidthUint8, &FunNum); // function number + WaitForEcLDN9MailboxCmdAck (); + } + } + } + CurPoint = &pConfig->Pecstruct.MSGFun81zone0MSGREG0; + for ( FunIndex = 0; FunIndex <= 0; FunIndex++ ) { + FunNum = FunctionNumber[FunIndex]; + for ( ZoneNum = 0; ZoneNum < MaxZone[FunIndex]; ZoneNum++ ) { + IsSendEcMsg = IsZoneFuncEnable (pConfig->Pecstruct.IMCFUNSupportBitMap, FunIndex, ZoneNum); + for ( RegNum = MSG_REG0; RegNum <= MaxRegister[FunIndex]; RegNum++ ) { + if (IsSendEcMsg) { + WriteECmsg (RegNum, AccWidthUint8, CurPoint); // + } + CurPoint += 1; + } + if (IsSendEcMsg) { + WriteECmsg (MSG_SYS_TO_IMC, AccWidthUint8, &FunNum); // function number + WaitForEcLDN9MailboxCmdAck (); + } + } + } +} + +/*------------------------------------------------------------------------------- +;Procedure: SBIMCFanInitializeS3 +; +;Description: This routine initialize IMC fan when S3 resume +; +; +;Exit: None +; +;Modified: None +; +;----------------------------------------------------------------------------- +*/ +VOID +SBIMCFanInitializeS3 (VOID) +{ + UINT8 dbPortStatus,Value80,Value82,Value83,Value84; + + getChipSysMode (&dbPortStatus); + if ((dbPortStatus & ChipSysEcEnable) != 0) { + Value80 = 0x98; + Value82 = 0x00; + Value83 = 0x02; + Value84 = 0x00; + + // Clear MSG_REG0 to receive acknowledge byte + WriteECmsg (MSG_REG0, AccWidthUint8, &Value82); + + // Set MSG_REG1 + // 0x02 - Notify IMC that the system is waken from any sleep state + WriteECmsg (MSG_REG1, AccWidthUint8, &Value83); + + // Set timeout counter value to 00 which disables watchdog timer + WriteECmsg (MSG_REG2, AccWidthUint8, &Value84); + + // Write mailbox function number to kick off the command + // 0x98 - IMC System Sleep and Wake Services + WriteECmsg (MSG_SYS_TO_IMC, AccWidthUint8, &Value80); + + // Read acknowledge byte to make sure function is executed properly + WaitForEcLDN9MailboxCmdAck (); + } +} diff --git a/src/vendorcode/amd/cimx/sb800/EcLib.c b/src/vendorcode/amd/cimx/sb800/EcLib.c new file mode 100644 index 0000000..54d87e7 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/EcLib.c @@ -0,0 +1,156 @@ +/** + * @file + * + * Southbridge EC IO access common routine + * + */ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#include "SBPLATFORM.h" +#include "cbtypes.h" + +// #ifndef NO_EC_SUPPORT + +/*----------------------------------------------------------------------------------------*/ +/** + * EnterEcConfig - Force EC into Config mode + * + * + * + * + */ +VOID +EnterEcConfig ( + ) +{ + UINT16 dwEcIndexPort; + + ReadPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwEcIndexPort); + dwEcIndexPort &= ~(BIT0); + RWIO (dwEcIndexPort, AccWidthUint8, 0x00, 0x5A); +} + +/*----------------------------------------------------------------------------------------*/ +/** + * ExitEcConfig - Force EC exit Config mode + * + * + * + * + */ +VOID +ExitEcConfig ( + ) +{ + UINT16 dwEcIndexPort; + + ReadPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwEcIndexPort); + dwEcIndexPort &= ~(BIT0); + RWIO (dwEcIndexPort, AccWidthUint8, 0x00, 0xA5); +} + +/*----------------------------------------------------------------------------------------*/ +/** + * ReadEC8 - Read EC register data + * + * + * + * @param[in] Address - EC Register Offset Value + * @param[in] Value - Read Data Buffer + * + */ +VOID +ReadEC8 ( + IN UINT8 Address, + IN UINT8* Value + ) +{ + UINT16 dwEcIndexPort; + + ReadPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwEcIndexPort); + dwEcIndexPort &= ~(BIT0); + WriteIO (dwEcIndexPort, AccWidthUint8, &Address); + ReadIO (dwEcIndexPort + 1, AccWidthUint8, Value); +} + +/*----------------------------------------------------------------------------------------*/ +/** + * WriteEC8 - Write date into EC register + * + * + * + * @param[in] Address - EC Register Offset Value + * @param[in] Value - Write Data Buffer + * + */ +VOID +WriteEC8 ( + IN UINT8 Address, + IN UINT8* Value + ) +{ + UINT16 dwEcIndexPort; + + ReadPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwEcIndexPort); + dwEcIndexPort &= ~(BIT0); + + WriteIO (dwEcIndexPort, AccWidthUint8, &Address); + WriteIO (dwEcIndexPort + 1, AccWidthUint8, Value); +} + +/*----------------------------------------------------------------------------------------*/ +/** + * RWEC8 - Read/Write EC register + * + * + * + * @param[in] Address - EC Register Offset Value + * @param[in] AndMask - Data And Mask 8 bits + * @param[in] OrMask - Data OR Mask 8 bits + * + */ +VOID +RWEC8 ( + IN UINT8 Address, + IN UINT8 AndMask, + IN UINT8 OrMask + ) +{ + UINT8 Result; + ReadEC8 (Address, &Result); + Result = (Result & AndMask) | OrMask; + WriteEC8 (Address, &Result); +} + +// #endif + diff --git a/src/vendorcode/amd/cimx/sb800/GEC.c b/src/vendorcode/amd/cimx/sb800/GEC.c deleted file mode 100644 index d1715bc..0000000 --- a/src/vendorcode/amd/cimx/sb800/GEC.c +++ /dev/null @@ -1,145 +0,0 @@ -/** - * @file - * - * Config Southbridge GEC controller - * - * Init GEC features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: CIMx-SB - * @e sub-project: - * @e $Revision:$ @e $Date:$ - * - */ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#include "SBPLATFORM.h" -#include "cbtypes.h" - -/** - * gecInitBeforePciEnum - Config GEC controller before PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -gecInitBeforePciEnum ( - IN AMDSBCFG* pConfig - ) -{ - UINT8 cimSBGecDebugBus; - UINT8 cimSBGecPwr; - - cimSBGecDebugBus = (UINT8) pConfig->SBGecDebugBus; - cimSBGecPwr = (UINT8) pConfig->SBGecPwr; -#if SB_CIMx_PARAMETER == 0 - cimSBGecDebugBus = cimSBGecDebugBusDefault; - cimSBGecPwr = cimSBGecPwrDefault; -#endif - if ( pConfig->GecConfig == 0) { - // GEC Enabled - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF6, AccWidthUint8, ~BIT0, 0x00); - RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GEVENT_REG11, AccWidthUint8, 0, 0x00); - RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GEVENT_REG21, AccWidthUint8, 0, 0x01); - RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG166, AccWidthUint8, 0, 0x01); - //RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG181, AccWidthUint8, 0, 0x01); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF8, AccWidthUint8, ~(BIT5 + BIT6), (UINT8) ((cimSBGecPwr) << 5)); - } else { - // GEC Disabled - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF6, AccWidthUint8, ~BIT0, BIT0); - return; //return if GEC controller is disabled. - } - if ( cimSBGecDebugBus == 1) { - // GEC Debug Bus Enabled - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF6, AccWidthUint8, ~BIT3, BIT3); - } else { - // GEC Debug Bus Disabled - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF6, AccWidthUint8, ~BIT3, 0x00); - } -} - -/** - * gecInitAfterPciEnum - Config GEC controller after PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -gecInitAfterPciEnum ( - IN AMDSBCFG* pConfig - ) -{ - VOID* GecRomAddress; - VOID* GecShadowRomAddress; - UINT32 ddTemp; - UINT8 dbVar; - UINT8 dbTemp; - if ( pConfig->GecConfig == 0) { - dbVar = 0; - ReadPCI ((GEC_BUS_DEV_FUN << 16) + SB_GEC_REG04, AccWidthUint8, &dbVar); - dbTemp = 0x07; - WritePCI ((GEC_BUS_DEV_FUN << 16) + SB_GEC_REG04, AccWidthUint8, &dbTemp); - if ( pConfig->DYNAMICGECROM.DynamicGecRomAddress_Ptr != NULL ) { - GecRomAddress = pConfig->DYNAMICGECROM.DynamicGecRomAddress_Ptr; - GecShadowRomAddress = (VOID*) (UINTN) pConfig->BuildParameters.GecShadowRomBase; - AmdSbCopyMem (GecShadowRomAddress, GecRomAddress, 0x100); - ReadPCI ((GEC_BUS_DEV_FUN << 16) + SB_GEC_REG10, AccWidthUint32, &ddTemp); - ddTemp = ddTemp & 0xFFFFFFF0; - RWMEM (ddTemp + 0x6804, AccWidthUint32, 0, BIT0 + BIT29); - } - WritePCI ((GEC_BUS_DEV_FUN << 16) + SB_GEC_REG04, AccWidthUint8, &dbVar); - } -} - -/** - * gecInitLatePost - Prepare GEC controller to boot to OS. - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -gecInitLatePost ( - IN AMDSBCFG* pConfig - ) -{ - if ( !pConfig->GecConfig == 0) { - return; //return if GEC controller is disabled. - } -} - - diff --git a/src/vendorcode/amd/cimx/sb800/Gec.c b/src/vendorcode/amd/cimx/sb800/Gec.c new file mode 100644 index 0000000..d1715bc --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/Gec.c @@ -0,0 +1,145 @@ +/** + * @file + * + * Config Southbridge GEC controller + * + * Init GEC features. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: CIMx-SB + * @e sub-project: + * @e $Revision:$ @e $Date:$ + * + */ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#include "SBPLATFORM.h" +#include "cbtypes.h" + +/** + * gecInitBeforePciEnum - Config GEC controller before PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +gecInitBeforePciEnum ( + IN AMDSBCFG* pConfig + ) +{ + UINT8 cimSBGecDebugBus; + UINT8 cimSBGecPwr; + + cimSBGecDebugBus = (UINT8) pConfig->SBGecDebugBus; + cimSBGecPwr = (UINT8) pConfig->SBGecPwr; +#if SB_CIMx_PARAMETER == 0 + cimSBGecDebugBus = cimSBGecDebugBusDefault; + cimSBGecPwr = cimSBGecPwrDefault; +#endif + if ( pConfig->GecConfig == 0) { + // GEC Enabled + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF6, AccWidthUint8, ~BIT0, 0x00); + RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GEVENT_REG11, AccWidthUint8, 0, 0x00); + RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GEVENT_REG21, AccWidthUint8, 0, 0x01); + RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG166, AccWidthUint8, 0, 0x01); + //RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG181, AccWidthUint8, 0, 0x01); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF8, AccWidthUint8, ~(BIT5 + BIT6), (UINT8) ((cimSBGecPwr) << 5)); + } else { + // GEC Disabled + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF6, AccWidthUint8, ~BIT0, BIT0); + return; //return if GEC controller is disabled. + } + if ( cimSBGecDebugBus == 1) { + // GEC Debug Bus Enabled + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF6, AccWidthUint8, ~BIT3, BIT3); + } else { + // GEC Debug Bus Disabled + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF6, AccWidthUint8, ~BIT3, 0x00); + } +} + +/** + * gecInitAfterPciEnum - Config GEC controller after PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +gecInitAfterPciEnum ( + IN AMDSBCFG* pConfig + ) +{ + VOID* GecRomAddress; + VOID* GecShadowRomAddress; + UINT32 ddTemp; + UINT8 dbVar; + UINT8 dbTemp; + if ( pConfig->GecConfig == 0) { + dbVar = 0; + ReadPCI ((GEC_BUS_DEV_FUN << 16) + SB_GEC_REG04, AccWidthUint8, &dbVar); + dbTemp = 0x07; + WritePCI ((GEC_BUS_DEV_FUN << 16) + SB_GEC_REG04, AccWidthUint8, &dbTemp); + if ( pConfig->DYNAMICGECROM.DynamicGecRomAddress_Ptr != NULL ) { + GecRomAddress = pConfig->DYNAMICGECROM.DynamicGecRomAddress_Ptr; + GecShadowRomAddress = (VOID*) (UINTN) pConfig->BuildParameters.GecShadowRomBase; + AmdSbCopyMem (GecShadowRomAddress, GecRomAddress, 0x100); + ReadPCI ((GEC_BUS_DEV_FUN << 16) + SB_GEC_REG10, AccWidthUint32, &ddTemp); + ddTemp = ddTemp & 0xFFFFFFF0; + RWMEM (ddTemp + 0x6804, AccWidthUint32, 0, BIT0 + BIT29); + } + WritePCI ((GEC_BUS_DEV_FUN << 16) + SB_GEC_REG04, AccWidthUint8, &dbVar); + } +} + +/** + * gecInitLatePost - Prepare GEC controller to boot to OS. + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +gecInitLatePost ( + IN AMDSBCFG* pConfig + ) +{ + if ( !pConfig->GecConfig == 0) { + return; //return if GEC controller is disabled. + } +} + + diff --git a/src/vendorcode/amd/cimx/sb800/IOLIB.c b/src/vendorcode/amd/cimx/sb800/IOLIB.c deleted file mode 100644 index 1d21d9c..0000000 --- a/src/vendorcode/amd/cimx/sb800/IOLIB.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#include "SBPLATFORM.h" -#include "cbtypes.h" - - -VOID -ReadIO ( - IN UINT16 Address, - IN UINT8 OpFlag, - IN VOID* Value - ) -{ - OpFlag = OpFlag & 0x7f; - switch ( OpFlag ) { - case AccWidthUint8: - *(UINT8*)Value = ReadIo8 (Address); - break; - case AccWidthUint16: - *(UINT16*)Value = ReadIo16 (Address); - break; - case AccWidthUint32: - *(UINT32*)Value = ReadIo32 (Address); - break; - } -} - -VOID -WriteIO ( - IN UINT16 Address, - IN UINT8 OpFlag, - IN VOID* Value - ) -{ - OpFlag = OpFlag & 0x7f; - switch ( OpFlag ) { - case AccWidthUint8: - WriteIo8 (Address, *(UINT8*)Value); - break; - case AccWidthUint16: - WriteIo16 (Address, *(UINT16*)Value); - break; - case AccWidthUint32: - WriteIo32 (Address, *(UINT32*)Value); - break; - } -} - -VOID -RWIO ( - IN UINT16 Address, - IN UINT8 OpFlag, - IN UINT32 Mask, - IN UINT32 Data - ) -{ - UINT32 Result; - ReadIO (Address, OpFlag, &Result); - Result = (Result & Mask) | Data; - WriteIO (Address, OpFlag, &Result); -} diff --git a/src/vendorcode/amd/cimx/sb800/IoLib.c b/src/vendorcode/amd/cimx/sb800/IoLib.c new file mode 100644 index 0000000..1d21d9c --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/IoLib.c @@ -0,0 +1,91 @@ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#include "SBPLATFORM.h" +#include "cbtypes.h" + + +VOID +ReadIO ( + IN UINT16 Address, + IN UINT8 OpFlag, + IN VOID* Value + ) +{ + OpFlag = OpFlag & 0x7f; + switch ( OpFlag ) { + case AccWidthUint8: + *(UINT8*)Value = ReadIo8 (Address); + break; + case AccWidthUint16: + *(UINT16*)Value = ReadIo16 (Address); + break; + case AccWidthUint32: + *(UINT32*)Value = ReadIo32 (Address); + break; + } +} + +VOID +WriteIO ( + IN UINT16 Address, + IN UINT8 OpFlag, + IN VOID* Value + ) +{ + OpFlag = OpFlag & 0x7f; + switch ( OpFlag ) { + case AccWidthUint8: + WriteIo8 (Address, *(UINT8*)Value); + break; + case AccWidthUint16: + WriteIo16 (Address, *(UINT16*)Value); + break; + case AccWidthUint32: + WriteIo32 (Address, *(UINT32*)Value); + break; + } +} + +VOID +RWIO ( + IN UINT16 Address, + IN UINT8 OpFlag, + IN UINT32 Mask, + IN UINT32 Data + ) +{ + UINT32 Result; + ReadIO (Address, OpFlag, &Result); + Result = (Result & Mask) | Data; + WriteIO (Address, OpFlag, &Result); +} diff --git a/src/vendorcode/amd/cimx/sb800/LEGACY.c b/src/vendorcode/amd/cimx/sb800/LEGACY.c deleted file mode 100644 index f95006f..0000000 --- a/src/vendorcode/amd/cimx/sb800/LEGACY.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#include "SBPLATFORM.h" -#include "cbtypes.h" - -UINT32 -GetFixUp ( - OUT VOID - ) -{ - AMD_CONFIG_PARAMS* Result; - Result = (AMD_CONFIG_PARAMS*) getConfigPointer (); - if ( Result->ImageBasePtr > 0x100000 && Result->ImageBasePtr < 0xFF000000 ) { - return 0; - } - return Result->ImageBasePtr; -} diff --git a/src/vendorcode/amd/cimx/sb800/Legacy.c b/src/vendorcode/amd/cimx/sb800/Legacy.c new file mode 100644 index 0000000..f95006f --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/Legacy.c @@ -0,0 +1,47 @@ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#include "SBPLATFORM.h" +#include "cbtypes.h" + +UINT32 +GetFixUp ( + OUT VOID + ) +{ + AMD_CONFIG_PARAMS* Result; + Result = (AMD_CONFIG_PARAMS*) getConfigPointer (); + if ( Result->ImageBasePtr > 0x100000 && Result->ImageBasePtr < 0xFF000000 ) { + return 0; + } + return Result->ImageBasePtr; +} diff --git a/src/vendorcode/amd/cimx/sb800/MEMLIB.c b/src/vendorcode/amd/cimx/sb800/MEMLIB.c deleted file mode 100644 index 5531c62..0000000 --- a/src/vendorcode/amd/cimx/sb800/MEMLIB.c +++ /dev/null @@ -1,96 +0,0 @@ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#include "SBPLATFORM.h" -#include "cbtypes.h" - -VOID -ReadMEM ( - IN UINT32 Address, - IN UINT8 OpFlag, - IN VOID* Value - ) -{ - OpFlag = OpFlag & 0x7f; - switch ( OpFlag ) { - case AccWidthUint8: - *((UINT8*)Value) = *((UINT8*) ((UINTN)Address)); - break; - case AccWidthUint16: - //*((UINT16*)Value) = *((UINT16*) ((UINTN)Address)); //gcc break strict-aliasing rules - *((UINT8*)Value) = *((UINT8*) ((UINTN)Address)); - *((UINT8*)Value + 1) = *((UINT8*)((UINTN)Address) + 1); - break; - case AccWidthUint32: - *((UINT32*)Value) = *((UINT32*) ((UINTN)Address)); - break; - } -} - -VOID -WriteMEM ( - IN UINT32 Address, - IN UINT8 OpFlag, - IN VOID* Value - ) -{ - OpFlag = OpFlag & 0x7f; - switch ( OpFlag ) { - case AccWidthUint8 : - *((UINT8*) ((UINTN)Address)) = *((UINT8*)Value); - break; - case AccWidthUint16: - //*((UINT16*) ((UINTN)Address)) = *((UINT16*)Value); //gcc break strict-aliasing rules - *((UINT8*)((UINTN)Address)) = *((UINT8*)Value); - *((UINT8*)((UINTN)Address) + 1) = *((UINT8*)Value + 1); - break; - case AccWidthUint32: - *((UINT32*) ((UINTN)Address)) = *((UINT32*)Value); - break; - } -} - -VOID -RWMEM ( - IN UINT32 Address, - IN UINT8 OpFlag, - IN UINT32 Mask, - IN UINT32 Data - ) -{ - UINT32 Result; - ReadMEM (Address, OpFlag, &Result); - Result = (Result & Mask) | Data; - WriteMEM (Address, OpFlag, &Result); -} - - diff --git a/src/vendorcode/amd/cimx/sb800/Makefile.inc b/src/vendorcode/amd/cimx/sb800/Makefile.inc index fde6239..9871af1 100644 --- a/src/vendorcode/amd/cimx/sb800/Makefile.inc +++ b/src/vendorcode/amd/cimx/sb800/Makefile.inc @@ -27,52 +27,52 @@ CPPFLAGS_x86_64 += -I$(src)/southbridge/amd/cimx/sb800 CPPFLAGS_x86_64 += -I$(src)/include/cpu/amd/common CPPFLAGS_x86_64 += -I$(src)/vendorcode/amd/cimx/sb800
-romstage-y += ACPILIB.c -romstage-y += AZALIA.c -romstage-y += DISPATCHER.c -romstage-y += ECfanc.c -romstage-y += ECfanLIB.c -romstage-y += GEC.c +romstage-y += AcpiLib.c +romstage-y += Azalia.c +romstage-y += Dispatcher.c +romstage-y += EcFanc.c +romstage-y += EcFanLib.c +romstage-y += Gec.c romstage-y += Gpp.c -romstage-y += PMIO2LIB.c -romstage-y += SATA.c -romstage-y += SBCMN.c -romstage-y += SBMAIN.c -romstage-y += SBPort.c -romstage-y += MEMLIB.c -romstage-y += PCILIB.c -romstage-y += IOLIB.c -romstage-y += PMIOLIB.c -romstage-y += AMDLIB.c -romstage-y += SBPELIB.c -romstage-y += AMDSBLIB.c -romstage-y += ECLIB.c -romstage-y += EC.c -romstage-y += SMM.c -romstage-y += USB.c +romstage-y += Pmio2Lib.c +romstage-y += Sata.c +romstage-y += SbCmn.c +romstage-y += SbMain.c +romstage-y += SbPort.c +romstage-y += MemLib.c +romstage-y += PcoLib.c +romstage-y += IoLib.c +romstage-y += PmioLib.c +romstage-y += AmdLib.c +romstage-y += SbPeLib.c +romstage-y += AmdSbLib.c +romstage-y += EcLib.c +romstage-y += Ec.c +romstage-y += Smm.c +romstage-y += Usb.c
-ramstage-y += ACPILIB.c -ramstage-y += AZALIA.c -ramstage-y += DISPATCHER.c +ramstage-y += AcpiLib.c +ramstage-y += Azalia.c +ramstage-y += Dispatcher.c ramstage-y += ECfanc.c ramstage-y += ECfanLIB.c -ramstage-y += GEC.c +ramstage-y += Gec.c ramstage-y += Gpp.c -ramstage-y += PMIO2LIB.c -ramstage-y += SATA.c -ramstage-y += SBCMN.c -ramstage-y += SBMAIN.c -ramstage-y += SBPort.c -ramstage-y += MEMLIB.c -ramstage-y += PCILIB.c -ramstage-y += IOLIB.c -ramstage-y += PMIOLIB.c -ramstage-y += AMDLIB.c -ramstage-y += SBPELIB.c -ramstage-y += AMDSBLIB.c -ramstage-y += ECLIB.c -ramstage-y += EC.c -ramstage-y += SMM.c -ramstage-y += USB.c -#ramstage-y += LEGACY.c +ramstage-y += Pmio2Lib.c +ramstage-y += Sata.c +ramstage-y += SbCmn.c +ramstage-y += SbMain.c +ramstage-y += SbPort.c +ramstage-y += MemLib.c +ramstage-y += PciLib.c +ramstage-y += IoLib.c +ramstage-y += PmioLib.c +ramstage-y += AmdLib.c +ramstage-y += SbPeLib.c +ramstage-y += AmdSbLib.c +ramstage-y += EcLib.c +ramstage-y += Ec.c +ramstage-y += Smm.c +ramstage-y += Usb.c +#ramstage-y += Legacy.c #ramstage-y += SbModInf.c diff --git a/src/vendorcode/amd/cimx/sb800/MemLib.c b/src/vendorcode/amd/cimx/sb800/MemLib.c new file mode 100644 index 0000000..5531c62 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/MemLib.c @@ -0,0 +1,96 @@ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#include "SBPLATFORM.h" +#include "cbtypes.h" + +VOID +ReadMEM ( + IN UINT32 Address, + IN UINT8 OpFlag, + IN VOID* Value + ) +{ + OpFlag = OpFlag & 0x7f; + switch ( OpFlag ) { + case AccWidthUint8: + *((UINT8*)Value) = *((UINT8*) ((UINTN)Address)); + break; + case AccWidthUint16: + //*((UINT16*)Value) = *((UINT16*) ((UINTN)Address)); //gcc break strict-aliasing rules + *((UINT8*)Value) = *((UINT8*) ((UINTN)Address)); + *((UINT8*)Value + 1) = *((UINT8*)((UINTN)Address) + 1); + break; + case AccWidthUint32: + *((UINT32*)Value) = *((UINT32*) ((UINTN)Address)); + break; + } +} + +VOID +WriteMEM ( + IN UINT32 Address, + IN UINT8 OpFlag, + IN VOID* Value + ) +{ + OpFlag = OpFlag & 0x7f; + switch ( OpFlag ) { + case AccWidthUint8 : + *((UINT8*) ((UINTN)Address)) = *((UINT8*)Value); + break; + case AccWidthUint16: + //*((UINT16*) ((UINTN)Address)) = *((UINT16*)Value); //gcc break strict-aliasing rules + *((UINT8*)((UINTN)Address)) = *((UINT8*)Value); + *((UINT8*)((UINTN)Address) + 1) = *((UINT8*)Value + 1); + break; + case AccWidthUint32: + *((UINT32*) ((UINTN)Address)) = *((UINT32*)Value); + break; + } +} + +VOID +RWMEM ( + IN UINT32 Address, + IN UINT8 OpFlag, + IN UINT32 Mask, + IN UINT32 Data + ) +{ + UINT32 Result; + ReadMEM (Address, OpFlag, &Result); + Result = (Result & Mask) | Data; + WriteMEM (Address, OpFlag, &Result); +} + + diff --git a/src/vendorcode/amd/cimx/sb800/PCILIB.c b/src/vendorcode/amd/cimx/sb800/PCILIB.c deleted file mode 100644 index 01be81a..0000000 --- a/src/vendorcode/amd/cimx/sb800/PCILIB.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - - -#include "SBPLATFORM.h" -#include "cbtypes.h" - -VOID -ReadPCI ( - IN UINT32 Address, - IN UINT8 OpFlag, - IN VOID* Value - ) -{ - OpFlag = OpFlag & 0x7f; - - if ( (UINT16)Address < 0xff ) { - //Normal Config Access - UINT32 AddrCf8; - AddrCf8 = (1 << 31) + ((Address >> 8) & 0x0FFFF00) + (Address & 0xFC); - WriteIO (0xCf8, AccWidthUint32, &AddrCf8); - ReadIO ((UINT16) (0xCfC + (Address & 0x3)), OpFlag, Value); - } -} - -VOID -WritePCI ( - IN UINT32 Address, - IN UINT8 OpFlag, - IN VOID* Value - ) -{ - OpFlag = OpFlag & 0x7f; - if ( (UINT16)Address < 0xff ) { - //Normal Config Access - UINT32 AddrCf8; - AddrCf8 = (1 << 31) + ((Address >> 8)&0x0FFFF00) + (Address & 0xFC); - WriteIO (0xCf8, AccWidthUint32, &AddrCf8); - WriteIO ((UINT16) (0xCfC + (Address & 0x3)), OpFlag, Value); - } -} - -VOID -RWPCI ( - IN UINT32 Address, - IN UINT8 OpFlag, - IN UINT32 Mask, - IN UINT32 Data - ) -{ - UINT32 Result; - Result = 0; - OpFlag = OpFlag & 0x7f; - ReadPCI (Address, OpFlag, &Result); - Result = (Result & Mask) | Data; - WritePCI (Address, OpFlag, &Result); -} diff --git a/src/vendorcode/amd/cimx/sb800/PMIO2LIB.c b/src/vendorcode/amd/cimx/sb800/PMIO2LIB.c deleted file mode 100644 index 82864e6..0000000 --- a/src/vendorcode/amd/cimx/sb800/PMIO2LIB.c +++ /dev/null @@ -1,130 +0,0 @@ -/** - * @file - * - * Southbridge PMIO2 access common routine - * - */ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#include "SBPLATFORM.h" -#include "cbtypes.h" - - -/*----------------------------------------------------------------------------------------*/ -/** - * Read PMIO2 - * - * - * - * @param[in] Address - PMIO2 Offset value - * @param[in] OpFlag - Access sizes - * @param[in] Value - Read Data Buffer - * - */ -VOID -ReadPMIO2 ( - IN UINT8 Address, - IN UINT8 OpFlag, - IN VOID* Value - ) -{ - UINT8 i; - OpFlag = OpFlag & 0x7f; - - if ( OpFlag == 0x02 ) { - OpFlag = 0x03; - } - for ( i = 0; i <= OpFlag; i++ ) { - WriteIO (0xCD0, AccWidthUint8, &Address); // SB_IOMAP_REGCD0 - Address++; - ReadIO (0xCD1, AccWidthUint8, (UINT8 *) Value + i); // SB_IOMAP_REGCD1 - } -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Write PMIO 2 - * - * - * - * @param[in] Address - PMIO2 Offset value - * @param[in] OpFlag - Access sizes - * @param[in] Value - Write Data Buffer - * - */ -VOID -WritePMIO2 ( - IN UINT8 Address, - IN UINT8 OpFlag, - IN VOID* Value - ) -{ - UINT8 i; - OpFlag = OpFlag & 0x7f; - - if ( OpFlag == 0x02 ) { - OpFlag = 0x03; - } - for ( i = 0; i <= OpFlag; i++ ) { - WriteIO (0xCD0, AccWidthUint8, &Address); // SB_IOMAP_REGCD0 - Address++; - WriteIO (0xCD1, AccWidthUint8, (UINT8 *)Value + i); // SB_IOMAP_REGCD1 - } -} - -/*----------------------------------------------------------------------------------------*/ -/** - * RWPMIO2 - Read/Write PMIO2 - * - * - * - * @param[in] Address - PMIO2 Offset value - * @param[in] OpFlag - Access sizes - * @param[in] AndMask - Data And Mask 32 bits - * @param[in] OrMask - Data OR Mask 32 bits - * - */ -VOID -RWPMIO2 ( - IN UINT8 Address, - IN UINT8 OpFlag, - IN UINT32 AndMask, - IN UINT32 OrMask - ) -{ - UINT32 Result; - OpFlag = OpFlag & 0x7f; - ReadPMIO2 (Address, OpFlag, &Result); - Result = (Result & AndMask) | OrMask; - WritePMIO2 (Address, OpFlag, &Result); -} diff --git a/src/vendorcode/amd/cimx/sb800/PMIOLIB.c b/src/vendorcode/amd/cimx/sb800/PMIOLIB.c deleted file mode 100644 index 6cce4f1..0000000 --- a/src/vendorcode/amd/cimx/sb800/PMIOLIB.c +++ /dev/null @@ -1,129 +0,0 @@ -/** - * @file - * - * Southbridge PMIO access common routine - * - */ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#include "SBPLATFORM.h" -#include "cbtypes.h" - -/*----------------------------------------------------------------------------------------*/ -/** - * Read PMIO - * - * - * - * @param[in] Address - PMIO Offset value - * @param[in] OpFlag - Access sizes - * @param[in] Value - Read Data Buffer - * - */ -VOID -ReadPMIO ( - IN UINT8 Address, - IN UINT8 OpFlag, - IN VOID* Value - ) -{ - UINT8 i; - OpFlag = OpFlag & 0x7f; - - if ( OpFlag == 0x02 ) { - OpFlag = 0x03; - } - for ( i = 0; i <= OpFlag; i++ ) { - WriteIO (0xCD6, AccWidthUint8, &Address); // SB_IOMAP_REGCD6 - Address++; - ReadIO (0xCD7, AccWidthUint8, (UINT8 *)Value + i); // SB_IOMAP_REGCD7 - } -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Write PMIO - * - * - * - * @param[in] Address - PMIO Offset value - * @param[in] OpFlag - Access sizes - * @param[in] Value - Write Data Buffer - * - */ -VOID -WritePMIO ( - IN UINT8 Address, - IN UINT8 OpFlag, - IN VOID* Value - ) -{ - UINT8 i; - OpFlag = OpFlag & 0x7f; - - if ( OpFlag == 0x02 ) { - OpFlag = 0x03; - } - for ( i = 0; i <= OpFlag; i++ ) { - WriteIO (0xCD6, AccWidthUint8, &Address); // SB_IOMAP_REGCD6 - Address++; - WriteIO (0xCD7, AccWidthUint8, (UINT8 *)Value + i); // SB_IOMAP_REGCD7 - } -} - -/*----------------------------------------------------------------------------------------*/ -/** - * RWPMIO - Read/Write PMIO - * - * - * - * @param[in] Address - PMIO Offset value - * @param[in] OpFlag - Access sizes - * @param[in] AndMask - Data And Mask 32 bits - * @param[in] OrMask - Data OR Mask 32 bits - * - */ -VOID -RWPMIO ( - IN UINT8 Address, - IN UINT8 OpFlag, - IN UINT32 AndMask, - IN UINT32 OrMask - ) -{ - UINT32 Result; - OpFlag = OpFlag & 0x7f; - ReadPMIO (Address, OpFlag, &Result); - Result = (Result & AndMask) | OrMask; - WritePMIO (Address, OpFlag, &Result); -} diff --git a/src/vendorcode/amd/cimx/sb800/PciLib.c b/src/vendorcode/amd/cimx/sb800/PciLib.c new file mode 100644 index 0000000..01be81a --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/PciLib.c @@ -0,0 +1,86 @@ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + + +#include "SBPLATFORM.h" +#include "cbtypes.h" + +VOID +ReadPCI ( + IN UINT32 Address, + IN UINT8 OpFlag, + IN VOID* Value + ) +{ + OpFlag = OpFlag & 0x7f; + + if ( (UINT16)Address < 0xff ) { + //Normal Config Access + UINT32 AddrCf8; + AddrCf8 = (1 << 31) + ((Address >> 8) & 0x0FFFF00) + (Address & 0xFC); + WriteIO (0xCf8, AccWidthUint32, &AddrCf8); + ReadIO ((UINT16) (0xCfC + (Address & 0x3)), OpFlag, Value); + } +} + +VOID +WritePCI ( + IN UINT32 Address, + IN UINT8 OpFlag, + IN VOID* Value + ) +{ + OpFlag = OpFlag & 0x7f; + if ( (UINT16)Address < 0xff ) { + //Normal Config Access + UINT32 AddrCf8; + AddrCf8 = (1 << 31) + ((Address >> 8)&0x0FFFF00) + (Address & 0xFC); + WriteIO (0xCf8, AccWidthUint32, &AddrCf8); + WriteIO ((UINT16) (0xCfC + (Address & 0x3)), OpFlag, Value); + } +} + +VOID +RWPCI ( + IN UINT32 Address, + IN UINT8 OpFlag, + IN UINT32 Mask, + IN UINT32 Data + ) +{ + UINT32 Result; + Result = 0; + OpFlag = OpFlag & 0x7f; + ReadPCI (Address, OpFlag, &Result); + Result = (Result & Mask) | Data; + WritePCI (Address, OpFlag, &Result); +} diff --git a/src/vendorcode/amd/cimx/sb800/Pmio2Lib.c b/src/vendorcode/amd/cimx/sb800/Pmio2Lib.c new file mode 100644 index 0000000..82864e6 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/Pmio2Lib.c @@ -0,0 +1,130 @@ +/** + * @file + * + * Southbridge PMIO2 access common routine + * + */ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#include "SBPLATFORM.h" +#include "cbtypes.h" + + +/*----------------------------------------------------------------------------------------*/ +/** + * Read PMIO2 + * + * + * + * @param[in] Address - PMIO2 Offset value + * @param[in] OpFlag - Access sizes + * @param[in] Value - Read Data Buffer + * + */ +VOID +ReadPMIO2 ( + IN UINT8 Address, + IN UINT8 OpFlag, + IN VOID* Value + ) +{ + UINT8 i; + OpFlag = OpFlag & 0x7f; + + if ( OpFlag == 0x02 ) { + OpFlag = 0x03; + } + for ( i = 0; i <= OpFlag; i++ ) { + WriteIO (0xCD0, AccWidthUint8, &Address); // SB_IOMAP_REGCD0 + Address++; + ReadIO (0xCD1, AccWidthUint8, (UINT8 *) Value + i); // SB_IOMAP_REGCD1 + } +} + +/*----------------------------------------------------------------------------------------*/ +/** + * Write PMIO 2 + * + * + * + * @param[in] Address - PMIO2 Offset value + * @param[in] OpFlag - Access sizes + * @param[in] Value - Write Data Buffer + * + */ +VOID +WritePMIO2 ( + IN UINT8 Address, + IN UINT8 OpFlag, + IN VOID* Value + ) +{ + UINT8 i; + OpFlag = OpFlag & 0x7f; + + if ( OpFlag == 0x02 ) { + OpFlag = 0x03; + } + for ( i = 0; i <= OpFlag; i++ ) { + WriteIO (0xCD0, AccWidthUint8, &Address); // SB_IOMAP_REGCD0 + Address++; + WriteIO (0xCD1, AccWidthUint8, (UINT8 *)Value + i); // SB_IOMAP_REGCD1 + } +} + +/*----------------------------------------------------------------------------------------*/ +/** + * RWPMIO2 - Read/Write PMIO2 + * + * + * + * @param[in] Address - PMIO2 Offset value + * @param[in] OpFlag - Access sizes + * @param[in] AndMask - Data And Mask 32 bits + * @param[in] OrMask - Data OR Mask 32 bits + * + */ +VOID +RWPMIO2 ( + IN UINT8 Address, + IN UINT8 OpFlag, + IN UINT32 AndMask, + IN UINT32 OrMask + ) +{ + UINT32 Result; + OpFlag = OpFlag & 0x7f; + ReadPMIO2 (Address, OpFlag, &Result); + Result = (Result & AndMask) | OrMask; + WritePMIO2 (Address, OpFlag, &Result); +} diff --git a/src/vendorcode/amd/cimx/sb800/PmioLib.c b/src/vendorcode/amd/cimx/sb800/PmioLib.c new file mode 100644 index 0000000..6cce4f1 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/PmioLib.c @@ -0,0 +1,129 @@ +/** + * @file + * + * Southbridge PMIO access common routine + * + */ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#include "SBPLATFORM.h" +#include "cbtypes.h" + +/*----------------------------------------------------------------------------------------*/ +/** + * Read PMIO + * + * + * + * @param[in] Address - PMIO Offset value + * @param[in] OpFlag - Access sizes + * @param[in] Value - Read Data Buffer + * + */ +VOID +ReadPMIO ( + IN UINT8 Address, + IN UINT8 OpFlag, + IN VOID* Value + ) +{ + UINT8 i; + OpFlag = OpFlag & 0x7f; + + if ( OpFlag == 0x02 ) { + OpFlag = 0x03; + } + for ( i = 0; i <= OpFlag; i++ ) { + WriteIO (0xCD6, AccWidthUint8, &Address); // SB_IOMAP_REGCD6 + Address++; + ReadIO (0xCD7, AccWidthUint8, (UINT8 *)Value + i); // SB_IOMAP_REGCD7 + } +} + +/*----------------------------------------------------------------------------------------*/ +/** + * Write PMIO + * + * + * + * @param[in] Address - PMIO Offset value + * @param[in] OpFlag - Access sizes + * @param[in] Value - Write Data Buffer + * + */ +VOID +WritePMIO ( + IN UINT8 Address, + IN UINT8 OpFlag, + IN VOID* Value + ) +{ + UINT8 i; + OpFlag = OpFlag & 0x7f; + + if ( OpFlag == 0x02 ) { + OpFlag = 0x03; + } + for ( i = 0; i <= OpFlag; i++ ) { + WriteIO (0xCD6, AccWidthUint8, &Address); // SB_IOMAP_REGCD6 + Address++; + WriteIO (0xCD7, AccWidthUint8, (UINT8 *)Value + i); // SB_IOMAP_REGCD7 + } +} + +/*----------------------------------------------------------------------------------------*/ +/** + * RWPMIO - Read/Write PMIO + * + * + * + * @param[in] Address - PMIO Offset value + * @param[in] OpFlag - Access sizes + * @param[in] AndMask - Data And Mask 32 bits + * @param[in] OrMask - Data OR Mask 32 bits + * + */ +VOID +RWPMIO ( + IN UINT8 Address, + IN UINT8 OpFlag, + IN UINT32 AndMask, + IN UINT32 OrMask + ) +{ + UINT32 Result; + OpFlag = OpFlag & 0x7f; + ReadPMIO (Address, OpFlag, &Result); + Result = (Result & AndMask) | OrMask; + WritePMIO (Address, OpFlag, &Result); +} diff --git a/src/vendorcode/amd/cimx/sb800/SATA.c b/src/vendorcode/amd/cimx/sb800/SATA.c deleted file mode 100644 index c2f2162..0000000 --- a/src/vendorcode/amd/cimx/sb800/SATA.c +++ /dev/null @@ -1,675 +0,0 @@ - -/** - * @file - * - * Config Southbridge SATA controller - * - * Init SATA features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: CIMx-SB - * @e sub-project: - * @e $Revision:$ @e $Date:$ - * - */ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#include "SBPLATFORM.h" -#include "cbtypes.h" - -// -// Declaration of local functions -// -VOID sataSetIrqIntResource (IN AMDSBCFG* pConfig); -VOID sataBar5setting (IN AMDSBCFG* pConfig, IN UINT32 *pBar5); -VOID shutdownUnconnectedSataPortClock (IN AMDSBCFG* pConfig, IN UINT32 ddBar5); -VOID sataDriveDetection (IN AMDSBCFG* pConfig, IN UINT32 *pBar5); - -/** - * sataSetIrqIntResource - Config SATA IRQ/INT# resource - * - * - * - Private function - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -sataSetIrqIntResource ( - IN AMDSBCFG* pConfig - ) -{ - UINT8 dbValue; - // IRQ14/IRQ15 come from IDE or SATA - dbValue = 0x08; - WriteIO (SB_IOMAP_REGC00, AccWidthUint8, &dbValue); - ReadIO (SB_IOMAP_REGC01, AccWidthUint8, &dbValue); - dbValue = dbValue & 0x0F; - if (pConfig->SataClass == 3) { - dbValue = dbValue | 0x50; - } else { - if (pConfig->SataIdeMode == 1) { - // Both IDE & SATA set to Native mode - dbValue = dbValue | 0xF0; - } - } - WriteIO (SB_IOMAP_REGC01, AccWidthUint8, &dbValue); -} - -/** - * sataBar5setting - Config SATA BAR5 - * - * - Private function - * - * @param[in] pConfig - Southbridge configuration structure pointer. - * @param[in] *pBar5 - SATA BAR5 buffer. - * - */ -VOID -sataBar5setting ( - IN AMDSBCFG* pConfig, - IN UINT32 *pBar5 - ) -{ - //Get BAR5 value - ReadPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG24), AccWidthUint32, pBar5); - //Assign temporary BAR if is not already assigned - if ( (*pBar5 == 0) || (*pBar5 == - 1) ) { - //assign temporary BAR5 - if ( (pConfig->TempMMIO == 0) || (pConfig->TempMMIO == - 1) ) { - *pBar5 = 0xFEC01000; - } else { - *pBar5 = pConfig->TempMMIO; - } - WritePCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG24), AccWidthUint32, pBar5); - } - //Clear Bits 9:0 - *pBar5 = *pBar5 & 0xFFFFFC00; -} -/** - * shutdownUnconnectedSataPortClock - Shutdown unconnected Sata port clock - * - * - Private function - * - * @param[in] pConfig Southbridge configuration structure pointer. - * @param[in] ddBar5 Sata BAR5 base address. - * - */ -VOID -shutdownUnconnectedSataPortClock ( - IN AMDSBCFG* pConfig, - IN UINT32 ddBar5 - ) -{ - UINT8 dbPortNum; - UINT8 dbPortSataStatus; - UINT8 NumOfPorts; - UINT8 cimSataClkAutoOff; - - cimSataClkAutoOff = (UINT8) pConfig->SataClkAutoOff; -#if SB_CIMx_PARAMETER == 0 - cimSataClkAutoOff = cimSataClkAutoOffDefault; -#endif - NumOfPorts = 0; - if ( cimSataClkAutoOff == TRUE ) { - for ( dbPortNum = 0; dbPortNum < 6; dbPortNum++ ) { - ReadMEM (ddBar5 + SB_SATA_BAR5_REG128 + (dbPortNum * 0x80), AccWidthUint8, &dbPortSataStatus); - // Shutdown the clock for the port and do the necessary port reporting changes. - // ?? Error port status should be 1 not 3 - if ( ((dbPortSataStatus & 0x0F) != 0x03) && (! ((pConfig->SataEspPort) & (1 << dbPortNum))) ) { - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8, 0xFF, (1 << dbPortNum)); - RWMEM (ddBar5 + SB_SATA_BAR5_REG0C, AccWidthUint8, ~(1 << dbPortNum), 00); - } - } //end of for (dbPortNum=0;dbPortNum<6;dbPortNum++) - ReadMEM (ddBar5 + SB_SATA_BAR5_REG0C, AccWidthUint8, &dbPortSataStatus); - //if all ports are in disabled state, report atleast one port - if ( (dbPortSataStatus & 0x3F) == 0) { - RWMEM (ddBar5 + SB_SATA_BAR5_REG0C, AccWidthUint8, (UINT32) ~(0x3F), 01); - } - ReadMEM (ddBar5 + SB_SATA_BAR5_REG0C, AccWidthUint8, &dbPortSataStatus); - for (dbPortNum = 0; dbPortNum < 6; dbPortNum ++) { - if (dbPortSataStatus & (1 << dbPortNum)) { - NumOfPorts++; - } - } - if ( NumOfPorts == 0) { - NumOfPorts = 0x01; - } - RWMEM (ddBar5 + SB_SATA_BAR5_REG00, AccWidthUint8, 0xE0, NumOfPorts - 1); - } //end of SataClkAuto Off option -} - -/** - * Table for class code of SATA Controller in different modes - * - * - * - * - */ -const static UINT32 sataIfCodeTable[] = -{ - 0x01018F40, //sata class ID of IDE - 0x01040040, //sata class ID of RAID - 0x01060140, //sata class ID of AHCI - 0x01018A40, //sata class ID of Legacy IDE - 0x01018F40, //sata class ID of IDE to AHCI mode -}; - -/** - * Table for device id of SATA Controller in different modes - * - * - * - * - */ -const static UINT16 sataDeviceIDTable[] = -{ - 0x4390, //sata device ID of IDE - 0x4392, //sata device ID of RAID - 0x4391, //sata class ID of AHCI - 0x4390, //sata device ID of Legacy IDE - 0x4390, //sata device ID of IDE->AHCI mode -}; - -/** - * Table for Sata Phy Fine Setting - * - * - * - * - */ -const static SATAPHYSETTING sataPhyTable[] = -{ - {0x3006, 0x0056A607}, - {0x2006, 0x00061400}, - {0x1006, 0x00061302}, - - {0x3206, 0x0056A607}, - {0x2206, 0x00061400}, - {0x1206, 0x00061302}, - - {0x3406, 0x0056A607}, - {0x2406, 0x00061402}, - {0x1406, 0x00064300}, - - {0x3606, 0x0056A607}, - {0x2606, 0x00061402}, - {0x1606, 0x00064300}, - - {0x3806, 0x0056A700}, - {0x2806, 0x00061502}, - {0x1806, 0x00064302}, - - {0x3A06, 0x0056A700}, - {0x2A06, 0x00061502}, - {0x1A06, 0x00064302} -}; - -/** - * sataInitBeforePciEnum - Config SATA controller before PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -sataInitBeforePciEnum ( - IN AMDSBCFG* pConfig - ) -{ - UINT32 ddTempVar; - UINT32 ddValue; - UINT32 *tempptr; - UINT16 *pDeviceIdptr; - UINT32 dwDeviceId; - UINT8 dbValue; - UINT8 pValue; - UINT16 i; - SATAPHYSETTING *pPhyTable; - - ddTempVar = 0; - // BIT0 Enable write access to PCI header (reg 08h-0Bh) by setting SATA PCI register 40h - // BIT4: Disable fast boot - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, 0xff, BIT0 + BIT2 + BIT4); - // BIT0 Enable write access to PCI header (reg 08h-0Bh) by setting IDE PCI register 40h - RWPCI (((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG40), AccWidthUint8 | S3_SAVE, 0xff, BIT0); - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8 | S3_SAVE, 0, pConfig->SataPortPower); - dbValue = (UINT8)pConfig->SataClass; - if (dbValue == AHCI_MODE_4394) { - dbValue = AHCI_MODE; - } - if (dbValue == IDE_TO_AHCI_MODE_4394) { - dbValue = IDE_TO_AHCI_MODE; - } - // Disable PATA MSI - RWPCI (((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG34), AccWidthUint8 | S3_SAVE, 0x00, 0x00); - RWPCI (((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG06), AccWidthUint8 | S3_SAVE, 0xEF, 0x00); - - // Get the appropriate class code from the table and write it to PCI register 08h-0Bh - // Set the appropriate SATA class based on the input parameters - // SATA IDE Controller Class ID & SSID - tempptr = (UINT32 *) FIXUP_PTR (&sataIfCodeTable[0]); - if ( (pConfig->SataIdeMode == 1) && (pConfig->SataClass != 3) ) { - ddValue = tempptr[0]; - // Write the class code to IDE PCI register 08h-0Bh - RWPCI (((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG08), AccWidthUint32 | S3_SAVE, 0, ddValue); - } - ddValue = tempptr[dbValue]; - // Write the class code to SATA PCI register 08h-0Bh - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG08), AccWidthUint32 | S3_SAVE, 0, ddValue); - if ( pConfig->SataClass == LEGACY_IDE_MODE ) { - //Set PATA controller to native mode - RWPCI (((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG09), AccWidthUint8 | S3_SAVE, 0x00, 0x08F); - } - if (pConfig->BuildParameters.IdeSsid != 0 ) { - RWPCI ((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pConfig->BuildParameters.IdeSsid); - } - // SATA Controller Class ID & SSID - pDeviceIdptr = (UINT16 *) FIXUP_PTR (&sataDeviceIDTable[0]); - if ( pConfig->BuildParameters.SataIDESsid != 0 ) { - ddTempVar = pConfig->BuildParameters.SataIDESsid; - } - dwDeviceId = pDeviceIdptr[dbValue]; - if ( pConfig->SataClass == RAID_MODE) { - if ( pConfig->BuildParameters.SataRAID5Ssid != 0 ) { - ddTempVar = pConfig->BuildParameters.SataRAID5Ssid; - } - dwDeviceId = V_SB_SATA_RAID5_DID; - pValue = SATA_EFUSE_LOCATION; - getEfuseStatus (&pValue); - if (( pValue & SATA_EFUSE_BIT ) || ( pConfig->SataForceRaid == 1 )) { - dwDeviceId = V_SB_SATA_RAID_DID; - if ( pConfig->BuildParameters.SataRAIDSsid != 0 ) { - ddTempVar = pConfig->BuildParameters.SataRAIDSsid; - } - } - } - if ( ((pConfig->SataClass) == AHCI_MODE) || ((pConfig->SataClass) == IDE_TO_AHCI_MODE) || - ((pConfig->SataClass) == AHCI_MODE_4394) || ((pConfig->SataClass) == IDE_TO_AHCI_MODE_4394) ) { - if ( pConfig->BuildParameters.SataAHCISsid != 0 ) { - ddTempVar = pConfig->BuildParameters.SataAHCISsid; - } - } - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, 0, dwDeviceId); - if ( ddTempVar != 0 ) { - RWPCI ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG2C, AccWidthUint32 | S3_SAVE, 0x00, ddTempVar); - } - // SATA IRQ Resource - sataSetIrqIntResource (pConfig); - - // 8.4 SATA PHY Programming Sequence - pPhyTable = (SATAPHYSETTING*)FIXUP_PTR (&sataPhyTable[0]); - for (i = 0; i < (sizeof (sataPhyTable) / sizeof (SATAPHYSETTING)); i++) { - RWPCI ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG84, AccWidthUint16 | S3_SAVE, ~(BIT1 + BIT2 + BIT9 + BIT10 + BIT11 + BIT12 + BIT13 + BIT14), pPhyTable->wPhyCoreControl); - RWPCI ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG94, AccWidthUint32 | S3_SAVE, 0x00, pPhyTable->dwPhyFineTune); - ++pPhyTable; - } - -// CallBackToOEM (SATA_PHY_PROGRAMMING, NULL, pConfig); - - RWPCI (((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG40), AccWidthUint8 | S3_SAVE, ~BIT0, 0); - // Disable write access to PCI header - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, ~BIT0, 0); -} - -/** - * sataInitAfterPciEnum - Config SATA controller after PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -sataInitAfterPciEnum ( - IN AMDSBCFG* pConfig - ) -{ - UINT32 ddAndMask; - UINT32 ddOrMask; - UINT32 ddBar5; - UINT8 dbVar; - UINT8 dbPortNum; - UINT8 dbEfuse; - UINT8 dbPortMode; - UINT16 SataPortMode; - UINT8 cimSataAggrLinkPmCap; - UINT8 cimSataPortMultCap; - UINT8 cimSataPscCap; - UINT8 cimSataSscCap; - UINT8 cimSataFisBasedSwitching; - UINT8 cimSataCccSupport; - - cimSataAggrLinkPmCap = (UINT8) pConfig->SataAggrLinkPmCap; - cimSataPortMultCap = (UINT8) pConfig->SataPortMultCap; - cimSataPscCap = (UINT8) pConfig->SataPscCap; - cimSataSscCap = (UINT8) pConfig->SataSscCap; - cimSataFisBasedSwitching = (UINT8) pConfig->SataFisBasedSwitching; - cimSataCccSupport = (UINT8) pConfig->SataCccSupport; - -#if SB_CIMx_PARAMETER == 0 - cimSataAggrLinkPmCap = cimSataAggrLinkPmCapDefault; - cimSataPortMultCap = cimSataPortMultCapDefault; - cimSataPscCap = cimSataPscCapDefault; - cimSataSscCap = cimSataSscCapDefault; - cimSataFisBasedSwitching = cimSataFisBasedSwitchingDefault; - cimSataCccSupport = cimSataCccSupportDefault; -#endif - - ddAndMask = 0; - ddOrMask = 0; - ddBar5 = 0; - if ( pConfig->SATAMODE.SataMode.SataController == 0 ) { - return; //return if SATA controller is disabled. - } - - //Enable write access to pci header, pm capabilities - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, 0xFF, BIT0); - //Disable AHCI Prefetch function - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8 | S3_SAVE, 0x7F, BIT7); - - sataBar5setting (pConfig, &ddBar5); - - ReadPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar); - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8,0xFF, 0x03); //memory and io access enable - dbEfuse = SATA_FIS_BASE_EFUSE_LOC; - getEfuseStatus (&dbEfuse); - - if ( !cimSataPortMultCap ) { - ddAndMask |= BIT12; - } - if ( cimSataAggrLinkPmCap ) { - ddOrMask |= BIT11; - } else { - ddAndMask |= BIT11; - } - if ( cimSataPscCap ) { - ddOrMask |= BIT1; - } - if ( cimSataSscCap ) { - ddOrMask |= BIT26; - } - if ( cimSataFisBasedSwitching ) { - if (dbEfuse & BIT1) { - ddAndMask |= BIT10; - } else { - ddOrMask |= BIT10; - } - } else { - ddAndMask |= BIT10; - } - // RPR 8.10 Disabling CCC (Command Completion Coalescing) support. - if ( cimSataCccSupport ) { - ddOrMask |= BIT19; - } else { - ddAndMask |= BIT19; - } - RWMEM ((ddBar5 + SB_SATA_BAR5_REGFC), AccWidthUint32 | S3_SAVE, ~ddAndMask, ddOrMask); - - - // SATA ESP port setting - // These config bits are set for SATA driver to identify which ports are external SATA ports and need to - // support hotplug. If a port is set as an external SATA port and need to support hotplug, then driver will - // not enable power management (HIPM & DIPM) for these ports. - if ( pConfig->SataEspPort != 0 ) { - RWMEM ((ddBar5 + SB_SATA_BAR5_REGF8), AccWidthUint32 | S3_SAVE, ~(pConfig->SataEspPort), 0); - RWMEM ((ddBar5 + SB_SATA_BAR5_REGF8), AccWidthUint32 | S3_SAVE, ~(BIT12 + BIT13 + BIT14 + BIT15 + BIT16 + BIT17 + BIT5 + BIT4 + BIT3 + BIT2 + BIT1 + BIT0), (pConfig->SataEspPort << 12)); - // RPR 8.7 External SATA Port Indication Registers - // If any of the ports was programmed as an external port, HCAP.SXS should also be set - RWMEM ((ddBar5 + SB_SATA_BAR5_REGFC), AccWidthUint32 | S3_SAVE, ~(BIT20), BIT20); - } else { - // RPR 8.7 External SATA Port Indication Registers - // If any of the ports was programmed as an external port, HCAP.SXS should also be set (Clear for no ESP port) - RWMEM ((ddBar5 + SB_SATA_BAR5_REGF8), AccWidthUint32 | S3_SAVE, ~(BIT5 + BIT4 + BIT3 + BIT2 + BIT1 + BIT0), 0x00); - RWMEM ((ddBar5 + SB_SATA_BAR5_REGFC), AccWidthUint32 | S3_SAVE, ~(BIT20), 0x00); - } - if ( cimSataFisBasedSwitching ) { - if (dbEfuse & BIT1) { - RWMEM ((ddBar5 + SB_SATA_BAR5_REGF8), AccWidthUint32 | S3_SAVE, ~(BIT22 + BIT23 + BIT24 + BIT25 + BIT26 + BIT27), 0x00); - } else { - RWMEM ((ddBar5 + SB_SATA_BAR5_REGF8), AccWidthUint32 | S3_SAVE, ~(BIT22 + BIT23 + BIT24 + BIT25 + BIT26 + BIT27), (BIT22 + BIT23 + BIT24 + BIT25 + BIT26 + BIT27)); - } - } else { - RWMEM ((ddBar5 + SB_SATA_BAR5_REGF8), AccWidthUint32 | S3_SAVE, ~(BIT22 + BIT23 + BIT24 + BIT25 + BIT26 + BIT27), 0x00); - } - - // Disabled SATA MSI and D3 Power State capability - // RPR 8.13 SATA MSI and D3 Power State Capability - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG34), AccWidthUint8 | S3_SAVE, 0, 0x70); - - if (((pConfig->SataClass) != NATIVE_IDE_MODE) && ((pConfig->SataClass) != LEGACY_IDE_MODE)) { - // RAID or AHCI - if ((pConfig->SATAMODE.SataMode.SataIdeCombinedMode) == SATA_IDE_COMBINE_DISABLE) { - RWMEM ((ddBar5 + SB_SATA_BAR5_REG00), AccWidthUint8 | S3_SAVE, ~(BIT2 + BIT1 + BIT0), BIT2 + BIT0); - RWMEM ((ddBar5 + SB_SATA_BAR5_REG0C), AccWidthUint8 | S3_SAVE, 0xC0, 0x3F); - // RPR 8.10 Disabling CCC (Command Completion Coalescing) support. - // 8 messages - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG50 + 2), AccWidthUint8, ~(BIT3 + BIT2 + BIT1), BIT2 + BIT1); - } else { - // RPR 8.10 Disabling CCC (Command Completion Coalescing) support. - if ( pConfig->SataCccSupport ) { - // 8 messages - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG50 + 2), AccWidthUint8, ~(BIT3 + BIT2 + BIT1), BIT2 + BIT1); - } else { - // 4 messages - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG50 + 2), AccWidthUint8, ~(BIT3 + BIT2 + BIT1), BIT2); - } - } - } - - if ( pConfig->BIOSOSHandoff == 1 ) { - RWMEM ((ddBar5 + SB_SATA_BAR5_REG24), AccWidthUint8 | S3_SAVE, ~BIT0, BIT0); - } else { - RWMEM ((ddBar5 + SB_SATA_BAR5_REG24), AccWidthUint8 | S3_SAVE, ~BIT0, 0x00); - } - - SataPortMode = (UINT16)pConfig->SataPortMode; - dbPortNum = 0; - while ( dbPortNum < 6 ) { - dbPortMode = (UINT8) (SataPortMode & 3); - if ( (dbPortMode == BIT0) || (dbPortMode == BIT1) ) { - if ( dbPortMode == BIT0 ) { - // set GEN 1 - RWMEM (ddBar5 + SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0x0F, 0x10); - } - if ( dbPortMode == BIT1 ) { - // set GEN2 (default is GEN3) - RWMEM (ddBar5 + SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0x0F, 0x20); - } - RWMEM (ddBar5 + SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0xFF, 0x01); - } - SataPortMode >>= 2; - dbPortNum ++; - } - SbStall (1000); - SataPortMode = (UINT16)pConfig->SataPortMode; - dbPortNum = 0; - while ( dbPortNum < 6 ) { - dbPortMode = (UINT8) (SataPortMode & 3); - if ( (dbPortMode == BIT0) || (dbPortMode == BIT1) ) { - RWMEM (ddBar5 + SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0xFE, 0x00); - } - dbPortNum ++; - SataPortMode >>= 2; - } - WritePCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar); - //Disable write access to pci header, pm capabilities - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, ~BIT0, 0); -} - - -/** - * sataInitMidPost - Config SATA controller in Middle POST. - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -sataInitMidPost ( - IN AMDSBCFG* pConfig - ) -{ - UINT32 ddBar5; - sataBar5setting (pConfig, &ddBar5); - //If this is not S3 resume and also if SATA set to one of IDE mode, then implement drive detection workaround. - if ( ! (pConfig->S3Resume) && ( ((pConfig->SataClass) != AHCI_MODE) && ((pConfig->SataClass) != RAID_MODE) ) ) { - sataDriveDetection (pConfig, &ddBar5); - } -} - -/** - * sataDriveDetection - Sata drive detection - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * @param[in] *pBar5 Sata BAR5 base address. - * - */ -VOID -sataDriveDetection ( - IN AMDSBCFG* pConfig, - IN UINT32 *pBar5 - ) -{ - UINT32 ddVar0; - UINT8 dbPortNum; - UINT8 dbVar0; - UINT16 dwIoBase; - UINT32 dwVar0; - if ( (pConfig->SataClass == NATIVE_IDE_MODE) || (pConfig->SataClass == LEGACY_IDE_MODE) || (pConfig->SataClass == IDE_TO_AHCI_MODE) ) { - for ( dbPortNum = 0; dbPortNum < 4; dbPortNum++ ) { - ReadMEM (*pBar5 + SB_SATA_BAR5_REG128 + dbPortNum * 0x80, AccWidthUint32, &ddVar0); - if ( ( ddVar0 & 0x0F ) == 0x03 ) { - if ( dbPortNum & BIT0 ) { - //this port belongs to secondary channel - ReadPCI (((UINT32) (SATA_BUS_DEV_FUN << 16) + SB_SATA_REG18), AccWidthUint16, &dwIoBase); - } else { - //this port belongs to primary channel - ReadPCI (((UINT32) (SATA_BUS_DEV_FUN << 16) + SB_SATA_REG10), AccWidthUint16, &dwIoBase); - } - //if legacy ide mode, then the bar registers don't contain the correct values. So we need to hardcode them - if ( pConfig->SataClass == LEGACY_IDE_MODE ) { - dwIoBase = ( (0x170) | ((UINT16) ( (~((UINT8) (dbPortNum & BIT0) << 7)) & 0x80 )) ); - } - if ( dbPortNum & BIT1 ) { - //this port is slave - dbVar0 = 0xB0; - } else { - //this port is master - dbVar0 = 0xA0; - } - dwIoBase &= 0xFFF8; - WriteIO (dwIoBase + 6, AccWidthUint8, &dbVar0); - //Wait in loop for 30s for the drive to become ready - for ( dwVar0 = 0; dwVar0 < 300000; dwVar0++ ) { - ReadIO (dwIoBase + 7, AccWidthUint8, &dbVar0); - if ( (dbVar0 & 0x88) == 0 ) { - break; - } - SbStall (100); - } - } //end of if ( ( ddVar0 & 0x0F ) == 0x03) - } //for (dbPortNum = 0; dbPortNum < 4; dbPortNum++) - } //if ( (pConfig->SataClass == NATIVE_IDE_MODE) || (pConfig->SataClass == LEGACY_IDE_MODE) || (pConfig->SataClass == IDE_TO_AHCI_MODE)) -} - -/** - * sataInitLatePost - Prepare SATA controller to boot to OS. - * - * - Set class ID to AHCI (if set to AHCI * Mode) - * - Enable AHCI interrupt - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -sataInitLatePost ( - IN AMDSBCFG* pConfig - ) -{ - UINT32 ddBar5; - UINT8 dbVar; - UINT8 dbPortNum; - - //Return immediately is sata controller is not enabled - if ( pConfig->SATAMODE.SataMode.SataController == 0 ) { - return; - } - //Enable write access to pci header, pm capabilities - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, 0xff, BIT0); - -// if ((pConfig->SATAMODE.SataMode.SataIdeCombinedMode) == SATA_IDE_COMBINE_DISABLE) { - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 1), AccWidthUint8 | S3_SAVE, ~BIT7, BIT7); -// } - sataBar5setting (pConfig, &ddBar5); - - ReadPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar); - //Enable memory and io access - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, 0xFF, 0x03); - - shutdownUnconnectedSataPortClock (pConfig, ddBar5); - - if (( pConfig->SataClass == IDE_TO_AHCI_MODE) || ( pConfig->SataClass == IDE_TO_AHCI_MODE_4394 )) { - //program the AHCI class code - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG08), AccWidthUint32 | S3_SAVE, 0, 0x01060100); - //Set interrupt enable bit - RWMEM ((ddBar5 + 0x04), AccWidthUint8, (UINT32)~0, BIT1); - //program the correct device id for AHCI mode - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, 0, 0x4391); - } - - if (( pConfig->SataClass == AHCI_MODE_4394 ) || ( pConfig->SataClass == IDE_TO_AHCI_MODE_4394 )) { - //program the correct device id for AHCI 4394 mode - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, 0, 0x4394); - } - - //Clear error status ?? only 4 port - RWMEM ((ddBar5 + SB_SATA_BAR5_REG130), AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); - RWMEM ((ddBar5 + SB_SATA_BAR5_REG1B0), AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); - RWMEM ((ddBar5 + SB_SATA_BAR5_REG230), AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); - RWMEM ((ddBar5 + SB_SATA_BAR5_REG2B0), AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); - RWMEM ((ddBar5 + SB_SATA_BAR5_REG330), AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); - RWMEM ((ddBar5 + SB_SATA_BAR5_REG3B0), AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); - //Restore memory and io access bits - WritePCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar ); - //Disable write access to pci header and pm capabilities - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, ~BIT0, 0); - for ( dbPortNum = 0; dbPortNum < 6; dbPortNum++ ) { - RWMEM ((ddBar5 + 0x110 + (dbPortNum * 0x80)), AccWidthUint32, 0xFFFFFFFF, 0x00); - } -} - - diff --git a/src/vendorcode/amd/cimx/sb800/SBCMN.c b/src/vendorcode/amd/cimx/sb800/SBCMN.c deleted file mode 100644 index 8e9f0e2..0000000 --- a/src/vendorcode/amd/cimx/sb800/SBCMN.c +++ /dev/null @@ -1,1066 +0,0 @@ -/** - * @file - * - * Southbridge Initial routine - * - * - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: CIMx-SB - * @e sub-project: - * @e $Revision:$ @e $Date:$ - * - */ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#include "SBPLATFORM.h" -#include "cbtypes.h" -// -// Declaration of local functions -// - -VOID abcfgTbl (IN ABTBLENTRY* pABTbl); - -/** - * sbUsbPhySetting - USB Phy Calibration Adjustment - * - * - * @param[in] Value Controller PCI config address (bus# + device# + function#) - * - */ -VOID sbUsbPhySetting (IN UINT32 Value); - - -/*--------------------------- Documentation Pages ---------------------------*/ -/** - * @page LegacyInterfaceCalls Legacy Interface Calls - * <TD>@subpage SB_POWERON_INIT_Page "SB_POWERON_INIT"</TD><TD></TD> - * <TD>@subpage SB_BEFORE_PCI_INIT_Page "SB_BEFORE_PCI_INIT"</TD><TD></TD> - * <TD>@subpage SB_AFTER_PCI_INIT_Page "SB_AFTER_PCI_INIT"</TD><TD></TD> - * <TD>@subpage SB_LATE_POST_INIT_Page "SB_LATE_POST_INIT"</TD><TD></TD> - * <TD>@subpage SB_BEFORE_PCI_RESTORE_INIT_Page "SB_BEFORE_PCI_RESTORE_INIT"</TD><TD></TD> - * <TD>@subpage SB_AFTER_PCI_RESTORE_INIT_Page "SB_AFTER_PCI_RESTORE_INIT"</TD><TD></TD> - * <TD>@subpage SB_SMM_SERVICE_Page "SB_SMM_SERVICE"</TD><TD></TD> - * <TD>@subpage SB_SMM_ACPION_Page "SB_SMM_ACPION"</TD><TD></TD> - * - * @page LegacyInterfaceCallOuts Legacy Interface CallOuts - * <TD>@subpage CB_SBGPP_RESET_ASSERT_Page CB_SBGPP_RESET_ASSERT - * <TD>@subpage CB_SBGPP_RESET_DEASSERT_Page CB_SBGPP_RESET_DEASSERT - * -*/ - -/** - * sbEarlyPostByteInitTable - PCI device registers initial during early POST. - * - */ -const static REG8MASK sbEarlyPostByteInitTable[] = -{ - // SMBUS Device (Bus 0, Dev 20, Func 0) - {0x00, SMBUS_BUS_DEV_FUN, 0}, - {SB_CFG_REG10, 0X00, (SBCIMx_Version & 0xFF)}, //Program the version information - {SB_CFG_REG11, 0X00, (SBCIMx_Version >> 8)}, - {0xFF, 0xFF, 0xFF}, - - // IDE Device (Bus 0, Dev 20, Func 1) - {0x00, IDE_BUS_DEV_FUN, 0}, - {SB_IDE_REG62 + 1, ~BIT0, BIT5}, // Enabling IDE Explicit Pre-Fetch IDE PCI Config 0x62[8]=0 - // Allow MSI capability of IDE controller to be visible. IDE PCI Config 0x62[13]=1 - {0xFF, 0xFF, 0xFF}, - - // Azalia Device (Bus 0, Dev 20, Func 2) - {0x00, AZALIA_BUS_DEV_FUN, 0}, - {SB_AZ_REG4C, ~BIT0, BIT0}, - {0xFF, 0xFF, 0xFF}, - - // LPC Device (Bus 0, Dev 20, Func 3) - {0x00, LPC_BUS_DEV_FUN, 0}, - {SB_LPC_REG40, ~BIT2, BIT2}, // RPR 1.1 Enabling LPC DMA Function 0x40[2]=1b 0x78[0]=0b - {SB_LPC_REG78, ~BIT0, 00}, // RPR 1.1 Enabling LPC DMA Function 0x40[2]=1b 0x78[0]=0b - {SB_LPC_REG78, ~BIT1, 00}, // Disables MSI capability - {SB_LPC_REGBB, ~BIT0, BIT0 + BIT3 + BIT4 + BIT5}, // Enabled SPI Prefetch from HOST. - {0xFF, 0xFF, 0xFF}, - - // PCIB Bridge (Bus 0, Dev 20, Func 4) - {0x00, PCIB_BUS_DEV_FUN, 0}, - {SB_PCIB_REG40, 0xFF, BIT5}, // RPR PCI-bridge Subtractive Decode - {SB_PCIB_REG4B, 0xFF, BIT7}, // - {SB_PCIB_REG66, 0xFF, BIT4}, // RPR Enabling One-Prefetch-Channel Mode, PCIB_PCI_config 0x64 [20] - {SB_PCIB_REG65, 0xFF, BIT7}, // RPR proper operation of CLKRUN#. - {SB_PCIB_REG0D, 0x00, 0x40}, // Setting Latency Timers to 0x40, Enables the PCIB to retain ownership - {SB_PCIB_REG1B, 0x00, 0x40}, // of the bus on the Primary side and on the Secondary side when GNT# is deasserted. - {SB_PCIB_REG66 + 1, 0xFF, BIT1}, // RPR Enable PCI bus GNT3#.. - {0xFF, 0xFF, 0xFF}, - - // SATA Device (Bus 0, Dev 17, Func 0) - {0x00, SATA_BUS_DEV_FUN, 0}, - {SB_SATA_REG44, 0xff, BIT0}, // Enables the SATA watchdog timer register prior to the SATA BIOS post - {SB_SATA_REG44 + 2, 0, 0x20}, // RPR 8.12 SATA PCI Watchdog timer setting - // [SB01923] Set timer out to 0x20 to fix IDE to SATA Bridge dropping drive issue. - {0xFF, 0xFF, 0xFF}, -}; - - -/** - * sbPmioEPostInitTable - Southbridge ACPI MMIO initial during POST. - * - */ -const static AcpiRegWrite sbPmioEPostInitTable[] = -{ - // HPET workaround - {PMIO_BASE >> 8, SB_PMIOA_REG54 + 3, 0xFC, BIT0 + BIT1}, - {PMIO_BASE >> 8, SB_PMIOA_REG54 + 2, 0x7F, BIT7}, - {PMIO_BASE >> 8, SB_PMIOA_REG54 + 2, 0x7F, 0x00}, - // End of HPET workaround - // Enable SB800 A12 ACPI bits at PMIO 0xC0 [30,10:3] - // ClrAllStsInThermalEvent 3 Set to 1 to allow ASF remote power down/power cycle, Thermal event, Fan slow event to clear all the Gevent status and enabled bits. The bit should be set to 1 all the time. - // UsbGoodClkDlyEn 4 Set to 1 to delay de-assertion of Usb clk by 6 Osc clk. The bit should be set to 1 all the time. - // ForceNBCPUPwr 5 Set to 1 to force CPU pwrGood to be toggled along with NB pwrGood. - // MergeUsbPerReq 6 Set to 1 to merge usb perdical traffic into usb request as one of break event. - // IMCWatchDogRstEn 7 Set to 1 to allow IMC watchdog timer to reset entire acpi block. The bit should be set to 1 when IMC is enabled. - // GeventStsFixEn 8 1: Gevent status is not reset by its enable bit. 0: Gevent status is reset by its enable bit. - // PmeTimerFixEn 9 Set to 1 to reset Pme Timer when going to sleep state. - // UserRst2EcEn 10 Set to 1 to route user reset event to Ec. The bit should be set to 1 when IMC is enabled. - // Smbus0ClkSEn 30 Set to 1 to enable SMBus0 controller clock stretch support. - {PMIO_BASE >> 8, SB_PMIOA_REGC4, ~(BIT2 + BIT4), BIT2 + BIT4}, - {PMIO_BASE >> 8, SB_PMIOA_REGC0, 0, 0xF9}, - // PM_reg xC1 [3] = 1b, per RPR 2.7 CPU PwrGood Setting - {PMIO_BASE >> 8, SB_PMIOA_REGC0 + 1, 0x04, 0x0B}, - // RtcSts 19-17 RTC_STS set only in Sleep State. - // GppPme 20 Set to 1 to enable PME request from SB GPP. - // Pcireset 22 Set to 1 to allow SW to reset PCIe. - {PMIO_BASE >> 8, SB_PMIOA_REGC2, 0x20, 0x58}, - {PMIO_BASE >> 8, SB_PMIOA_REGC2 + 1, 0, 0x40}, - - //Item Id: SB02037: RTC_STS should be set in S state - //set PMIO 0xC0 [19:16] Set to 1110 to allow RTC_STS to be set only in non_G0 state. - //{PMIO_BASE >> 8, SB_PMIOA_REGC2, (UINT8)~(0x0F), 0x0E}, - - //Item Id: SB02034 - //Title: SB GPP NIC auto wake at second time sleep - //set PMIO 0xC4 bit 2 to 1 then set PMIO 0xC0 bit 20 to 1 to enable fix for SB02034 - - {PMIO_BASE >> 8, SB_PMIOA_REGC2, ~(BIT4), BIT4}, - - //{GPIO_BASE >> 8, SB_GPIO_REG62 , 0x00, 0x4E}, - {PMIO_BASE >> 8, SB_PMIOA_REG74, 0x00, BIT0 + BIT1 + BIT2 + BIT4}, - {PMIO_BASE >> 8, SB_PMIOA_REGDE + 1, ~(BIT0 + BIT1), BIT0 + BIT1}, - {PMIO_BASE >> 8, SB_PMIOA_REGDE, ~BIT4, BIT4}, - {PMIO_BASE >> 8, SB_PMIOA_REGBA, ~BIT3, BIT3}, - {PMIO_BASE >> 8, SB_PMIOA_REGBA + 1, ~BIT6, BIT6}, - {PMIO_BASE >> 8, SB_PMIOA_REGBC, ~BIT1, BIT1}, - {PMIO_BASE >> 8, SB_PMIOA_REGED, ~(BIT0 + BIT1), 0}, - //RPR Hiding Flash Controller PM_IO 0xDC[7] = 0x0 & PM_IO 0xDC [1:0]=0x01 - {PMIO_BASE >> 8, SB_PMIOA_REGDC, 0x7C, BIT0}, - // RPR Turning off FC clock - {MISC_BASE >> 8, SB_MISC_REG40 + 1, ~(BIT3 + BIT2), BIT3 + BIT2}, - {MISC_BASE >> 8, SB_MISC_REG40 + 2, ~BIT0, BIT0}, - {SMI_BASE >> 8, SB_SMI_Gevent0, 0, 29}, - {SMI_BASE >> 8, SB_SMI_Gevent1, 0, 1}, - {SMI_BASE >> 8, SB_SMI_Gevent2, 0, 29}, - {SMI_BASE >> 8, SB_SMI_Gevent3, 0, 29}, - {SMI_BASE >> 8, SB_SMI_Gevent4, 0, 4}, - {SMI_BASE >> 8, SB_SMI_Gevent5, 0, 5}, - {SMI_BASE >> 8, SB_SMI_Gevent6, 0, 6}, - {SMI_BASE >> 8, SB_SMI_Gevent7, 0, 29}, - - {SMI_BASE >> 8, SB_SMI_Gevent9, 0, 29}, - {SMI_BASE >> 8, SB_SMI_Gevent10, 0, 29}, - {SMI_BASE >> 8, SB_SMI_Gevent11, 0, 29}, - {SMI_BASE >> 8, SB_SMI_Gevent12, 0, 29}, - {SMI_BASE >> 8, SB_SMI_Gevent13, 0, 29}, - {SMI_BASE >> 8, SB_SMI_Gevent14, 0, 29}, - {SMI_BASE >> 8, SB_SMI_Gevent15, 0, 29}, - {SMI_BASE >> 8, SB_SMI_Gevent16, 0, 29}, - {SMI_BASE >> 8, SB_SMI_Gevent17, 0, 29}, - {SMI_BASE >> 8, SB_SMI_Gevent18, 0, 29}, - {SMI_BASE >> 8, SB_SMI_Gevent19, 0, 29}, - {SMI_BASE >> 8, SB_SMI_Gevent20, 0, 29}, - {SMI_BASE >> 8, SB_SMI_Gevent21, 0, 29}, - {SMI_BASE >> 8, SB_SMI_Gevent22, 0, 29}, - {SMI_BASE >> 8, SB_SMI_Gevent23, 0, 29}, -// - {SMI_BASE >> 8, SB_SMI_Usbwakup0, 0, 11}, - {SMI_BASE >> 8, SB_SMI_Usbwakup1, 0, 11}, - {SMI_BASE >> 8, SB_SMI_Usbwakup2, 0, 11}, - {SMI_BASE >> 8, SB_SMI_Usbwakup3, 0, 11}, - {SMI_BASE >> 8, SB_SMI_IMCGevent0, 0, 12}, - {SMI_BASE >> 8, SB_SMI_IMCGevent1, 0, 29}, - {SMI_BASE >> 8, SB_SMI_FanThGevent, 0, 13}, - {SMI_BASE >> 8, SB_SMI_SBGppPme0, 0, 15}, - {SMI_BASE >> 8, SB_SMI_SBGppPme1, 0, 16}, - {SMI_BASE >> 8, SB_SMI_SBGppPme2, 0, 17}, - {SMI_BASE >> 8, SB_SMI_SBGppPme3, 0, 18}, - {SMI_BASE >> 8, SB_SMI_SBGppHp0, 0, 29}, - {SMI_BASE >> 8, SB_SMI_SBGppHp1, 0, 29}, - {SMI_BASE >> 8, SB_SMI_SBGppHp2, 0, 29}, - {SMI_BASE >> 8, SB_SMI_SBGppHp3, 0, 29}, - {SMI_BASE >> 8, SB_SMI_GecPme, 0, 19}, - {SMI_BASE >> 8, SB_SMI_CIRPme, 0, 23}, - {SMI_BASE >> 8, SB_SMI_Gevent8, 0, 26}, - {SMI_BASE >> 8, SB_SMI_AzaliaPme, 0, 27}, - {SMI_BASE >> 8, SB_SMI_SataGevent0, 0, 30}, - {SMI_BASE >> 8, SB_SMI_SataGevent1, 0, 31}, - - {SMI_BASE >> 8, SB_SMI_WakePinGevent, 0, 29}, - {SMI_BASE >> 8, SB_SMI_ASFMasterIntr, 0, 29}, - {SMI_BASE >> 8, SB_SMI_ASFSlaveIntr, 0, 29}, - -// {SMI_BASE >> 8, SB_SMI_REG04, ~BIT4, BIT4}, -// {SMI_BASE >> 8, SB_SMI_REG04 + 1, ~BIT0, BIT0}, -// {SMI_BASE >> 8, SB_SMI_REG04 + 2, ~BIT3, BIT3}, - {SMI_BASE >> 8, SB_SMI_REG08, ~BIT4, 0}, - {SMI_BASE >> 8, SB_SMI_REG08+3, ~BIT2, 0}, -// {SMI_BASE >> 8, SB_SMI_REG0C, ~BIT4, BIT4}, - {SMI_BASE >> 8, SB_SMI_REG0C + 2, ~BIT3, BIT3}, - {SMI_BASE >> 8, SB_SMI_TWARN, 0, 9}, - {SMI_BASE >> 8, SB_SMI_TMI, 0, 29}, - {0xFF, 0xFF, 0xFF, 0xFF}, -}; - -/** - * abTblEntry800 - AB-Link Configuration Table for SB800 - * - */ -const static ABTBLENTRY abTblEntry800[] = -{ - // RPR Enable downstream posted transactions to pass non-posted transactions. - {ABCFG, SB_ABCFG_REG10090, BIT8 + BIT16, BIT8 + BIT16}, - - // RPR Enable SB800 to issue memory read/write requests in the upstream direction. - {AXCFG, SB_AB_REG04, BIT2, BIT2}, - - // RPR Enabling IDE/PCIB Prefetch for Performance Enhancement - // PCIB prefetch ABCFG 0x10060 [20] = 1 ABCFG 0x10064 [20] = 1 - {ABCFG, SB_ABCFG_REG10060, BIT20, BIT20}, // PCIB prefetch enable - {ABCFG, SB_ABCFG_REG10064, BIT20, BIT20}, // PCIB prefetch enable - - // RPR Controls the USB OHCI controller prefetch used for enhancing performance of ISO out devices. - // RPR Setting B-Link Prefetch Mode (ABCFG 0x80 [18:17] = 11) - {ABCFG, SB_ABCFG_REG80, BIT0 + BIT17 + BIT18, BIT0 + BIT17 + BIT18}, - - // RPR Enabled SMI ordering enhancement. ABCFG 0x90[21] - // RPR USB Delay A-Link Express L1 State. ABCFG 0x90[17] - {ABCFG, SB_ABCFG_REG90, BIT21 + BIT17, BIT21 + BIT17}, - - // RPR Disable the credit variable in the downstream arbitration equation - // RPR Register bit to qualify additional address bits into downstream register programming. (A12 BIT1 default is set) - {ABCFG, SB_ABCFG_REG9C, BIT0, BIT0}, - - // RPR Enabling Detection of Upstream Interrupts ABCFG 0x94 [20] = 1 - // ABCFG 0x94 [19:0] = cpu interrupt delivery address [39:20] - {ABCFG, SB_ABCFG_REG94, BIT20, BIT20 + 0x00FEE}, - - // RPR Programming cycle delay for AB and BIF clock gating - // RPR Enable the AB and BIF clock-gating logic. - // RPR Enable the A-Link int_arbiter enhancement to allow the A-Link bandwidth to be used more efficiently - // RPR Enable the requester ID for upstream traffic. [16]: SB/NB link [17]: GPP - {ABCFG, SB_ABCFG_REG10054, 0x00FFFFFF, 0x010407FF}, - {ABCFG, SB_ABCFG_REG98, 0xFFFF00FF, 0x00034700}, - {ABCFG, SB_ABCFG_REG54, 0x00FF0000, 0x00040000}, - // RPR Non-Posted Memory Write Support - {AX_INDXC, SB_AX_INDXC_REG10, BIT9, BIT9}, - {ABCFG, 0, 0, (UINT8) 0xFF}, // This dummy entry is to clear ab index - { (UINT8)0xFF, (UINT8)0xFF, (UINT8)0xFF, (UINT8)0xFF}, -}; - -/** - * SbPcieOrderRule - AB-Link Configuration Table for ablink Post Pass Np Downstream/Upstream Feature - * - */ -const static ABTBLENTRY SbPcieOrderRule[] = -{ -// abPostPassNpDownStreamTbl - {ABCFG, SB_ABCFG_REG10060, BIT31, BIT31}, - {ABCFG, SB_ABCFG_REG1009C, BIT4 + BIT5, BIT4 + BIT5}, - {ABCFG, SB_ABCFG_REG9C, BIT2 + BIT3 + BIT4 + BIT5 + BIT6 + BIT7, BIT2 + BIT3 + BIT4 + BIT5 + BIT6 + BIT7}, - {ABCFG, SB_ABCFG_REG90, BIT21 + BIT22 + BIT23, BIT21 + BIT22 + BIT23}, - {ABCFG, SB_ABCFG_REGF0, BIT6 + BIT5, BIT6 + BIT5}, - {AXINDC, SB_AX_INDXC_REG02, BIT9, BIT9}, - {ABCFG, SB_ABCFG_REG10090, BIT9 + BIT10 + BIT11 + BIT12, BIT9 + BIT10 + BIT11 + BIT12}, -// abPostPassNpUpStreamTbl - {ABCFG, SB_ABCFG_REG58, BIT10, BIT10}, - {ABCFG, SB_ABCFG_REGF0, BIT3 + BIT4, BIT3 + BIT4}, - {ABCFG, SB_ABCFG_REG54, BIT1, BIT1}, - { (UINT8)0xFF, (UINT8)0xFF, (UINT8)0xFF, (UINT8)0xFF}, -}; - -/** - * commonInitEarlyBoot - Config Southbridge SMBUS/ACPI/IDE/LPC/PCIB. - * - * This settings should be done during S3 resume also - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -commonInitEarlyBoot ( - IN AMDSBCFG* pConfig - ) -{ - UINT32 abValue; - UINT16 dwTempVar; - CPUID_DATA CpuId; - UINT8 cimNativepciesupport; - UINT8 cimIrConfig; - UINT8 Data; - - cimNativepciesupport = (UINT8) pConfig->NativePcieSupport; - cimIrConfig = (UINT8) pConfig->IrConfig; -#if SB_CIMx_PARAMETER == 0 - cimNativepciesupport = cimNativepciesupportDefault; - cimIrConfig = cimIrConfigDefault; -#endif - - //IR init Logical device 0x05 - if ( cimIrConfig ) { - // Enable EC_PortActive - RWPCI (((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4), AccWidthUint16 | S3_SAVE, 0xFFFE, BIT0); - EnterEcConfig (); - RWEC8 (0x07, 0x00, 0x05); //Select logical device 05, IR controller - RWEC8 (0x60, 0x00, 0x05); //Set Base Address to 550h - RWEC8 (0x61, 0x00, 0x50); - RWEC8 (0x70, 0xF0, 0x05); //Set IRQ to 05h - RWEC8 (0x30, 0x00, 0x01); //Enable logical device 5, IR controller - Data = 0xAB; - WriteIO (0x550, AccWidthUint8, &Data); - ReadIO (0x551, AccWidthUint8, &Data); - Data = ((Data & 0xFC ) | cimIrConfig); - WriteIO (0x551, AccWidthUint8, &Data); - ExitEcConfig (); - Data = 0xA0; // EC APIC index - WriteIO (SB_IOMAP_REGC00, AccWidthUint8, &Data); - Data = 0x05; // IRQ5 - WriteIO (SB_IOMAP_REGC01, AccWidthUint8, &Data); - } else { - EnterEcConfig (); - RWEC8 (0x07, 0x00, 0x05); //Select logical device 05, IR controller - RWEC8 (0x30, 0x00, 0x00); //Disable logical device 5, IR controller - ExitEcConfig (); - } - - - CpuidRead (0x01, &CpuId); - - // - // SB CFG programming - // - //Make BAR registers of smbus visible. - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8 + 1, AccWidthUint8, ~BIT6, 0); - //Early post initialization of pci config space - programPciByteTable ((REG8MASK*) FIXUP_PTR (&sbEarlyPostByteInitTable[0]), sizeof (sbEarlyPostByteInitTable) / sizeof (REG8MASK) ); - if ( pConfig->BuildParameters.SmbusSsid != 0 ) { - RWPCI ((SMBUS_BUS_DEV_FUN << 16) + SB_CFG_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pConfig->BuildParameters.SmbusSsid); - } - //Make BAR registers of smbus invisible. - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8 + 1, AccWidthUint8, ~BIT6, BIT6); - - // - // LPC CFG programming - // - // SSID for LPC Controller - if (pConfig->BuildParameters.LpcSsid != 0 ) { - RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pConfig->BuildParameters.LpcSsid); - } - // LPC MSI - if ( pConfig->BuildParameters.LpcMsi) { - RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG78, AccWidthUint32 | S3_SAVE, ~BIT1, BIT1); - } - - // - // PCIB CFG programming - // - //Disable or Enable PCI Clks based on input - RWPCI ((PCIB_BUS_DEV_FUN << 16) + SB_PCIB_REG42, AccWidthUint8 | S3_SAVE, ~(BIT5 + BIT4 + BIT3 + BIT2), ((pConfig->PciClks) & 0x0F) << 2 ); - RWPCI ((PCIB_BUS_DEV_FUN << 16) + SB_PCIB_REG4A, AccWidthUint8 | S3_SAVE, ~(BIT1 + BIT0), (pConfig->PciClks) >> 4 ); - // PCIB MSI - if ( pConfig->BuildParameters.PcibMsi) { - RWPCI ((PCIB_BUS_DEV_FUN << 16) + SB_PCIB_REG40, AccWidthUint8 | S3_SAVE, ~BIT3, BIT3); - } - - // - // AB CFG programming - // - // Read Arbiter address, Arbiter address is in PMIO 6Ch - ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG6C, AccWidthUint16, &dwTempVar); - RWIO (dwTempVar, AccWidthUint8, 0, 0); // Write 0 to enable the arbiter - - abLinkInitBeforePciEnum (pConfig); // Set ABCFG registers - // AB MSI - if ( pConfig->BuildParameters.AbMsi) { - abValue = readAlink (SB_ABCFG_REG94 | (UINT32) (ABCFG << 29)); - abValue = abValue | BIT20; - writeAlink (SB_ABCFG_REG94 | (UINT32) (ABCFG << 29), abValue); - } - - - // - // SB Specific Function programming - // - - // PCIE Native setting - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGBA + 1, AccWidthUint8, ~BIT14, 0); - if ( pConfig->NativePcieSupport == 1) { - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG74 + 3, AccWidthUint8, ~(BIT3 + BIT1 + BIT0), BIT2 + BIT0); - } else { - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG74 + 3, AccWidthUint8, ~(BIT3 + BIT1 + BIT0), BIT2); - } - -#ifdef ACPI_SLEEP_TRAP - // Set SLP_TYPE as SMI event - RWMEM (ACPI_MMIO_BASE + SMI_BASE + SB_SMI_REGB0, AccWidthUint8, ~(BIT2 + BIT3), BIT2); - // Disabled SLP function for S1/S3/S4/S5 - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGBE, AccWidthUint8, ~BIT5, 0x00); - // Set S state transition disabled (BIT0) force ACPI to send SMI message when writing to SLP_TYP Acpi register. (BIT1) - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG08 + 3, AccWidthUint8, ~(BIT0 + BIT1), BIT1); - // Enabled Global Smi ( BIT7 clear as 0 to enable ) - RWMEM (ACPI_MMIO_BASE + SMI_BASE + SB_SMI_REG98 + 3 , AccWidthUint8, ~BIT7, 0x00); -#endif - if ( pConfig->SbUsbPll == 0) { - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF3, AccWidthUint8, 0, 0x20); - } - // Set Stutter timer settings - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG80 + 1, AccWidthUint8, ~(BIT3 + BIT4), BIT3 + BIT4); - // Set LDTSTP# duration to 10us for HydraD CPU, or when HT link is 200MHz - if ((pConfig->AnyHT200MhzLink) || ((CpuId.EAX_Reg & 0x00ff00f0) == 0x100080) || ((CpuId.EAX_Reg & 0x00ff00f0) == 0x100090) || ((CpuId.EAX_Reg & 0x00ff00f0) == 0x1000A0)) { - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG94, AccWidthUint8, 0, 0x0A); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG80 + 3, AccWidthUint8 | S3_SAVE, 0xFE, 0x28); - } else { - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG94, AccWidthUint8, 0, 0x01); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG80 + 3, AccWidthUint8 | S3_SAVE, 0xFE, 0x20); - } - - //PM_Reg 0x7A[15] (CountHaltMsgEn) should be set when C1e option is enabled - //PM_Reg 0x7A[3:0] (NumOfCpu) should be set to 1h when C1e option is enabled - //PM_Reg 0x80[13] has to set to 1 to enable Message C scheme. - if (pConfig->MTC1e) { - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG7A, AccWidthUint16 | S3_SAVE, 0x7FF0, BIT15 + 1); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG80 + 1, AccWidthUint8 | S3_SAVE, ~BIT5, BIT5); - } - - programSbAcpiMmioTbl ((AcpiRegWrite *) (pConfig->OEMPROGTBL.OemProgrammingTablePtr_Ptr)); -} - -/** - * abSpecialSetBeforePciEnum - Special setting ABCFG registers before PCI emulation. - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -abSpecialSetBeforePciEnum ( - IN AMDSBCFG* pConfig - ) -{ - UINT32 abValue; - abValue = readAlink (SB_ABCFG_REGC0 | (UINT32) (ABCFG << 29)); - abValue &= 0xf0; - if ( pConfig->SbPcieOrderRule && abValue ) { - abValue = readAlink (SB_RCINDXC_REG02 | (UINT32) (RCINDXC << 29)); - abValue = abValue | BIT9; - writeAlink (SB_RCINDXC_REG02 | (UINT32) (RCINDXC << 29), abValue); - } -} - -VOID -usbDesertPll ( - IN AMDSBCFG* pConfig - ) -{ - if ( pConfig->SbUsbPll == 0) { - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF3, AccWidthUint8, 0, 0x00); - } -} - -/** - * commonInitEarlyPost - Config Southbridge SMBUS/ACPI/IDE/LPC/PCIB. - * - * This settings might not program during S3 resume - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -commonInitEarlyPost ( - IN AMDSBCFG* pConfig - ) -{ - UINT8 dbPortStatus; - UINT8 cimSpreadSpectrum; - UINT32 cimSpreadSpectrumType; - AMDSBCFG* pTmp; - pTmp = pConfig; - - cimSpreadSpectrum = pConfig->SpreadSpectrum; - cimSpreadSpectrumType = pConfig->BuildParameters.SpreadSpectrumType; -#if SB_CIMx_PARAMETER == 0 - cimSpreadSpectrum = cimSpreadSpectrumDefault; - cimSpreadSpectrumType = cimSpreadSpectrumTypeDefault; -#endif - programSbAcpiMmioTbl ((AcpiRegWrite*) FIXUP_PTR (&sbPmioEPostInitTable[0])); - - // CallBackToOEM (PULL_UP_PULL_DOWN_SETTINGS, NULL, pConfig); - - if ( cimSpreadSpectrum ) { - // Misc_Reg_40[25]=1 -> allow to change spread profile - // Misc_Reg19=83 -> new spread profile - // Misc_Reg[12:10]=9975be - // Misc_Reg0B=91 - // Misc_Reg09=21 - // Misc_Misc_Reg_08[0]=1 -> enable spread - RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x43, AccWidthUint8, ~BIT1, BIT1); - RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x19, AccWidthUint8, 0, 0x83); - getChipSysMode (&dbPortStatus); - if ( ((dbPortStatus & ChipSysIntClkGen) != ChipSysIntClkGen) ) { - RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x1A, AccWidthUint8, ~(BIT5 + BIT6 + BIT7), 0x80); - } - - if ( cimSpreadSpectrumType == 0 ) { - RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x12, AccWidthUint8, 0, 0x99); - RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x11, AccWidthUint8, 0, 0x75); - RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x10, AccWidthUint8, 0, 0xBE); - RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x0B, AccWidthUint8, 0, 0x91); - RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x09, AccWidthUint8, 0, 0x21); - } else { // Spread profile for Ontario CPU related platform - // This spread profile setting is for Ontario HDMI & DVI output from DP with -0.425% - // Misc_Reg[12:10]=828FA8 - // Misc_Reg0B=11 - // Misc_Reg09=21 - // Misc_Reg10[25:24]=01b - RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x12, AccWidthUint8, 0, 0x82); - RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x11, AccWidthUint8, 0, 0x8F); - RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x10, AccWidthUint8, 0, 0xA8); - RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x0B, AccWidthUint8, 0, 0x11); - RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x09, AccWidthUint8, 0, 0x21); - RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x13, AccWidthUint8, 0xFC, 0x1); - } - - RWMEM (ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG08, AccWidthUint8, 0xFE, 0x01); - } else { - RWMEM (ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG08, AccWidthUint8, 0xFE, 0x00); - } - - // RPR PLL 100Mhz Reference Clock Buffer setting for internal clock generator mode - getChipSysMode (&dbPortStatus); - if ( ((dbPortStatus & ChipSysIntClkGen) == ChipSysIntClkGen) ) { - RWMEM (ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG04 + 1, AccWidthUint8, ~BIT5, BIT5); - } - - // Set ASF SMBUS master function enabled here (temporary) - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG28, AccWidthUint16 | S3_SAVE, ~(BIT0 + BIT2), BIT0 + BIT2); - - programSbAcpiMmioTbl ((AcpiRegWrite *) (pConfig->OEMPROGTBL.OemProgrammingTablePtr_Ptr)); -#ifndef NO_EC_SUPPORT - // Software IMC enable - if (((pConfig->BuildParameters.ImcEnableOverWrite == 1) && ((dbPortStatus & ChipSysEcEnable) == 0)) || ((pConfig->BuildParameters.ImcEnableOverWrite == 2) && ((dbPortStatus & ChipSysEcEnable) == ChipSysEcEnable))) { - if (validateImcFirmware (pConfig)) { - softwareToggleImcStrapping (pConfig); - } else { - CallBackToOEM (IMC_FIRMWARE_FAIL, 0, pConfig); - } - } -#endif - -} -/** - * abLinkInitBeforePciEnum - Set ABCFG registers before PCI emulation. - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -abLinkInitBeforePciEnum ( - IN AMDSBCFG* pConfig - ) -{ - UINT32 cimResetCpuOnSyncFlood; - ABTBLENTRY *pAbTblPtr; - AMDSBCFG* Temp; - - cimResetCpuOnSyncFlood = pConfig->ResetCpuOnSyncFlood; -#if SB_CIMx_PARAMETER == 0 - cimResetCpuOnSyncFlood = cimResetCpuOnSyncFloodDefault; -#endif - Temp = pConfig; - if ( pConfig->SbPcieOrderRule ) { - pAbTblPtr = (ABTBLENTRY *) FIXUP_PTR (&SbPcieOrderRule[0]); - abcfgTbl (pAbTblPtr); - } - pAbTblPtr = (ABTBLENTRY *) FIXUP_PTR (&abTblEntry800[0]); - abcfgTbl (pAbTblPtr); - if ( cimResetCpuOnSyncFlood ) { - rwAlink (SB_ABCFG_REG10050 | (UINT32) (ABCFG << 29), ~BIT2, BIT2); - } -} - -/** - * abcfgTbl - Program ABCFG by input table. - * - * - * @param[in] pABTbl ABCFG config table. - * - */ -VOID -abcfgTbl ( - IN ABTBLENTRY* pABTbl - ) -{ - UINT32 ddValue; - - while ( (pABTbl->regType) != 0xFF ) { - if ( pABTbl->regType > AXINDC ) { - ddValue = pABTbl->regIndex | (pABTbl->regType << 29); - writeAlink (ddValue, ((readAlink (ddValue)) & (0xFFFFFFFF^ (pABTbl->regMask))) | pABTbl->regData); - } else { - ddValue = 0x30 | (pABTbl->regType << 29); - writeAlink (ddValue, pABTbl->regIndex); - ddValue = 0x34 | (pABTbl->regType << 29); - writeAlink (ddValue, ((readAlink (ddValue)) & (0xFFFFFFFF^ (pABTbl->regMask))) | pABTbl->regData); - } - ++pABTbl; - } - - //Clear ALink Access Index - ddValue = 0; - WriteIO (ALINK_ACCESS_INDEX, AccWidthUint32 | S3_SAVE, &ddValue); -} - -/** - * commonInitLateBoot - Prepare Southbridge register setting to boot to OS. - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -commonInitLateBoot ( - IN AMDSBCFG* pConfig - ) -{ - UINT8 dbValue; - UINT32 ddVar; - // We need to do the following setting in late post also because some bios core pci enumeration changes these values - // programmed during early post. - // RPR 4.5 Master Latency Timer - - dbValue = 0x40; - WritePCI ((PCIB_BUS_DEV_FUN << 16) + SB_PCIB_REG0D, AccWidthUint8, &dbValue); - WritePCI ((PCIB_BUS_DEV_FUN << 16) + SB_PCIB_REG1B, AccWidthUint8, &dbValue); - - //SB P2P AutoClock control settings. - ddVar = (pConfig->PcibAutoClkCtrlHigh << 16) | (pConfig->PcibAutoClkCtrlLow); - WritePCI ((PCIB_BUS_DEV_FUN << 16) + SB_PCIB_REG4C, AccWidthUint32, &ddVar); - ddVar = (pConfig->PcibClkStopOverride); - RWPCI ((PCIB_BUS_DEV_FUN << 16) + SB_PCIB_REG50, AccWidthUint16, 0x3F, (UINT16) (ddVar << 6)); - - RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGBB, AccWidthUint8, 0xBF | S3_SAVE, BIT3 + BIT4 + BIT5); - - // USB Phy Calibration Adjustment - ddVar = (USB1_EHCI_BUS_DEV_FUN << 16); - sbUsbPhySetting (ddVar); - ddVar = (USB2_EHCI_BUS_DEV_FUN << 16); - sbUsbPhySetting (ddVar); - ddVar = (USB3_EHCI_BUS_DEV_FUN << 16); - sbUsbPhySetting (ddVar); - - c3PopupSetting (pConfig); - FusionRelatedSetting (pConfig); -} - -/** - * sbUsbPhySetting - USB Phy Calibration Adjustment - * - * - * @param[in] Value Controller PCI config address (bus# + device# + function#) - * - */ -VOID -sbUsbPhySetting ( - IN UINT32 Value - ) -{ - UINT32 ddBarAddress; - UINT32 ddPhyStatus03; - UINT32 ddPhyStatus4; - UINT8 dbRevId; - //Get BAR address - ReadPCI ((UINT32) Value + SB_EHCI_REG10, AccWidthUint32, &ddBarAddress); - if ( (ddBarAddress != - 1) && (ddBarAddress != 0) ) { - ReadMEM ( ddBarAddress + SB_EHCI_BAR_REGA8, AccWidthUint32, &ddPhyStatus03); - ReadMEM ( ddBarAddress + SB_EHCI_BAR_REGAC, AccWidthUint32, &ddPhyStatus4); - ddPhyStatus03 &= 0x07070707; - ddPhyStatus4 &= 0x00000007; - if ( (ddPhyStatus03 != 0x00) | (ddPhyStatus4 != 0x00) ) { - // RPR 7.7 USB 2.0 Ports Driving Strength step 1 - //Make BAR registers of smbus visible. - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8 + 1, AccWidthUint8, ~BIT6, 0); - ReadPCI ((SMBUS_BUS_DEV_FUN << 16) + SB_CFG_REG08, AccWidthUint8, &dbRevId); - //Make BAR registers of smbus invisible. - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8 + 1, AccWidthUint8, ~BIT6, BIT6); - if (dbRevId == 0x41) { // A12 - RWMEM (ddBarAddress + SB_EHCI_BAR_REGC0, AccWidthUint32, 0xFFFF00FF, 0x1500); - RWMEM (ddBarAddress + SB_EHCI_BAR_REGC4, AccWidthUint32, 0xFFFFF0FF, 0); - } else if (dbRevId == 0x42) { // A13 - RWMEM (ddBarAddress + SB_EHCI_BAR_REGC0, AccWidthUint32, 0xFFFF00FF, 0x0F00); - RWMEM (ddBarAddress + SB_EHCI_BAR_REGC4, AccWidthUint32, 0xFFFFF0FF, 0x0100); - } - } - } -} - -/** - * hpetInit - Program Southbridge HPET function - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * @param[in] pStaticOptions Platform build configuration table. - * - */ -VOID -hpetInit ( - IN AMDSBCFG* pConfig, - IN BUILDPARAM *pStaticOptions - ) -{ - DESCRIPTION_HEADER* pHpetTable; - UINT8 cimHpetTimer; - UINT8 cimHpetMsiDis; - - cimHpetTimer = (UINT8) pConfig->HpetTimer; - cimHpetMsiDis = (UINT8) pConfig->HpetMsiDis; -#if SB_CIMx_PARAMETER == 0 - cimHpetTimer = cimHpetTimerDefault; - cimHpetMsiDis = cimHpetMsiDisDefault; -#endif - pHpetTable = NULL; - if ( cimHpetTimer == TRUE ) { - //Program the HPET BAR address - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG50, AccWidthUint32 | S3_SAVE, 0xFFFFF800, pStaticOptions->HpetBase); - //Enabling decoding of HPET MMIO - //Enable HPET MSI support - //Enable High Precision Event Timer (also called Multimedia Timer) interrupt - if ( cimHpetMsiDis == FALSE ) { - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG50, AccWidthUint32 | S3_SAVE, 0xFFFFF800, BIT0 + BIT1 + BIT2 + BIT3 + BIT4); - } else { - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG50, AccWidthUint32 | S3_SAVE, 0xFFFFF800, BIT0 + BIT1); - } - - } else { - if ( ! (pConfig->S3Resume) ) { - pHpetTable = (DESCRIPTION_HEADER*) ACPI_LocateTable (Int32FromChar('H', 'P', 'E', 'T')); - } - if ( pHpetTable != NULL ) { - pHpetTable->Signature = Int32FromChar('T', 'E', 'P', 'H'); - } - } -} - -/** - * c3PopupSetting - Program Southbridge C state function - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -c3PopupSetting ( - IN AMDSBCFG* pConfig - ) -{ - AMDSBCFG* Temp; - UINT8 dbValue; - Temp = pConfig; - //RPR C-State and VID/FID Change - dbValue = getNumberOfCpuCores (); - if (dbValue > 1) { - //PM 0x80[2]=1, For system with dual core CPU, set this bit to 1 to automatically clear BM_STS when the C3 state is being initiated. - //PM 0x80[1]=1, For system with dual core CPU, set this bit to 1 and BM_STS will cause C3 to wakeup regardless of BM_RLD - //PM 0x7E[6]=1, Enable pop-up for C3. For internal bus mastering or BmReq# from the NB, the SB will de-assert - //LDTSTP# (pop-up) to allow DMA traffic, then assert LDTSTP# again after some idle time. - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG80, AccWidthUint8 | S3_SAVE, ~(BIT1 + BIT2), (BIT1 + BIT2)); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG7E, AccWidthUint8 | S3_SAVE, ~BIT6, BIT6); - } - //SB800 needs to changed for RD790 support - //PM 0x80 [8] = 0 for system with RS780 - //Note: RS690 north bridge has AllowLdtStop built for both display and PCIE traffic to wake up the HT link. - //BmReq# needs to be ignored otherwise may cause LDTSTP# not to toggle. - //PM_IO 0x80[3]=1, Ignore BM_STS_SET message from NB - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG80, AccWidthUint16 | S3_SAVE, ~(BIT9 + BIT8 + BIT7 + BIT4 + BIT3 + BIT2 + BIT1 + BIT0), 0x21F); - //LdtStartTime = 10h for minimum LDTSTP# de-assertion duration of 16us in StutterMode. This is to guarantee that - //the HT link has been safely reconnected before it can be disconnected again. If C3 pop-up is enabled, the 16us also - //serves as the minimum idle time before LDTSTP# can be asserted again. This allows DMA to finish before the HT - //link is disconnected. - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG94 + 2, AccWidthUint8, 0, 0x10); - - //This setting provides 16us delay before the assertion of LDTSTOP# when C3 is entered. The - //delay will allow USB DMA to go on in a continuous manner - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG98 + 1, AccWidthUint8, 0, 0x10); - // Not in the RPR so far, it's hand writing from ASIC - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG7C, AccWidthUint8 | S3_SAVE, 0, 0x85); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG7C + 1, AccWidthUint8 | S3_SAVE, 0, 0x01); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG7E + 1, AccWidthUint8 | S3_SAVE, ~(BIT7 + BIT5), BIT7 + BIT5); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG88 + 1, AccWidthUint8 | S3_SAVE, ~BIT4, BIT4); - // RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG94, AccWidthUint8, 0, 0x10); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG98 + 3, AccWidthUint8, 0, 0x10); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGB4 + 1, AccWidthUint8, 0, 0x0B); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG88, AccWidthUint8 | S3_SAVE, 0xFF, BIT4); - if (pConfig->LdtStpDisable) { - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG88, AccWidthUint8 | S3_SAVE, ~BIT5, 0); - } -} - -/** - * FusionRelatedSetting - Program Fusion C related function - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -FusionRelatedSetting ( - IN AMDSBCFG* pConfig - ) -{ - UINT8 cimAcDcMsg; - UINT8 cimTimerTickTrack; - UINT8 cimClockInterruptTag; - UINT8 cimOhciTrafficHanding; - UINT8 cimEhciTrafficHanding; - UINT8 cimFusionMsgCMultiCore; - UINT8 cimFusionMsgCStage; - UINT32 ddValue; - - cimAcDcMsg = (UINT8) pConfig->AcDcMsg; - cimTimerTickTrack = (UINT8) pConfig->TimerTickTrack; - cimClockInterruptTag = (UINT8) pConfig->ClockInterruptTag; - cimOhciTrafficHanding = (UINT8) pConfig->OhciTrafficHanding; - cimEhciTrafficHanding = (UINT8) pConfig->EhciTrafficHanding; - cimFusionMsgCMultiCore = (UINT8) pConfig->FusionMsgCMultiCore; - cimFusionMsgCStage = (UINT8) pConfig->FusionMsgCStage; -#if SB_CIMx_PARAMETER == 0 - cimAcDcMsg = cimAcDcMsgDefault; - cimTimerTickTrack = cimTimerTickTrackDefault; - cimClockInterruptTag = cimClockInterruptTagDefault; - cimOhciTrafficHanding = cimOhciTrafficHandingDefault; - cimEhciTrafficHanding = cimEhciTrafficHandingDefault; - cimFusionMsgCMultiCore = cimFusionMsgCMultiCoreDefault; - cimFusionMsgCStage = cimFusionMsgCStageDefault; -#endif - ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGA0, AccWidthUint32 | S3_SAVE, &ddValue); - ddValue = ddValue & 0xC07F00A0; - if ( cimAcDcMsg ) { - ddValue = ddValue | BIT0; - } - if ( cimTimerTickTrack ) { - ddValue = ddValue | BIT1; - } - if ( cimClockInterruptTag ) { - ddValue = ddValue | BIT10; - } - if ( cimOhciTrafficHanding ) { - ddValue = ddValue | BIT13; - } - if ( cimEhciTrafficHanding ) { - ddValue = ddValue | BIT15; - } - if ( cimFusionMsgCMultiCore ) { - ddValue = ddValue | BIT23; - } - if ( cimFusionMsgCStage ) { - ddValue = (ddValue | (BIT6 + BIT4 + BIT3 + BIT2)); - } - WriteMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGA0, AccWidthUint32 | S3_SAVE, &ddValue); -} -#ifndef NO_EC_SUPPORT -/** - * validateImcFirmware - Validate IMC Firmware. - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - * @retval TRUE Pass - * @retval FALSE Failed - */ -BOOLEAN -validateImcFirmware ( - IN AMDSBCFG* pConfig - ) -{ - UINT32 ImcSig; - UINT32 ImcSigAddr; - UINT32 ImcAddr; - UINT32 CurAddr; - UINT32 ImcBinSig0; - UINT32 ImcBinSig1; - UINT16 ImcBinSig2; - UINT8 dbIMCChecksume; - UINT8 dbIMC; - ImcAddr = 0; - - // Software IMC enable - ImcSigAddr = 0x80000; // start from 512k to 64M - ImcSig = 0x0; // - while ( ( ImcSig != 0x55aa55aa ) && ( ImcSigAddr <= 0x4000000 ) ) { - CurAddr = 0xffffffff - ImcSigAddr + 0x20001; - ReadMEM (CurAddr, AccWidthUint32, &ImcSig); - ReadMEM ((CurAddr + 4), AccWidthUint32, &ImcAddr); - ImcSigAddr <<= 1; - } - - dbIMCChecksume = 0xff; - if ( ImcSig == 0x55aa55aa ) { - // "_AMD_IMC_C" at offset 0x2000 of the binary - ReadMEM ((ImcAddr + 0x2000), AccWidthUint32, &ImcBinSig0); - ReadMEM ((ImcAddr + 0x2004), AccWidthUint32, &ImcBinSig1); - ReadMEM ((ImcAddr + 0x2008), AccWidthUint16, &ImcBinSig2); - if ((ImcBinSig0 == 0x444D415F) && (ImcBinSig1 == 0x434D495F) && (ImcBinSig2 == 0x435F) ) { - dbIMCChecksume = 0; - for ( CurAddr = ImcAddr; CurAddr < ImcAddr + 0x10000; CurAddr++ ) { - ReadMEM (CurAddr, AccWidthUint8, &dbIMC); - dbIMCChecksume = dbIMCChecksume + dbIMC; - } - } - } - if ( dbIMCChecksume ) { - return FALSE; - } else { - return TRUE; - } -} - -/** - * softwareToggleImcStrapping - Software Toggle IMC Firmware Strapping. - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -softwareToggleImcStrapping ( - IN AMDSBCFG* pConfig - ) -{ - UINT8 dbValue; - UINT8 dbPortStatus; - UINT32 abValue; - UINT32 abValue1; - - getChipSysMode (&dbPortStatus); - - ReadPMIO (SB_PMIOA_REGBF, AccWidthUint8, &dbValue); - //if ( (dbValue & (BIT6 + BIT7)) != 0xC0 ) { // PwrGoodOut =1, PwrGoodEnB=1 - //The strapStatus register is not mapped into StrapOveride not in the same bit position. The following is difference. - - //StrapStatus StrapOverride - // bit4 bit17 - // bit6 bit12 - // bit12 bit15 - // bit15 bit16 - // bit16 bit18 - ReadMEM ((ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG80), AccWidthUint32, &abValue); - abValue1 = abValue; - if (abValue & BIT4) { - abValue1 = (abValue1 & ~BIT4) | BIT17; - } - if (abValue & BIT6) { - abValue1 = (abValue1 & ~BIT6) | BIT12; - } - if (abValue & BIT12) { - abValue1 = (abValue1 & ~BIT12) | BIT15; - } - if (abValue & BIT15) { - abValue1 = (abValue1 & ~BIT15) | BIT16; - } - if (abValue & BIT16) { - abValue1 = (abValue1 & ~BIT16) | BIT18; - } - abValue1 |= BIT31; // Overwrite enable - if ((dbPortStatus & ChipSysEcEnable) == 0) { - abValue1 |= BIT2; // bit2- EcEnableStrap - } else { - abValue1 &= ~BIT2; // bit2=0 EcEnableStrap - } - WriteMEM ((ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG84), AccWidthUint32, &abValue1); - dbValue |= BIT6; // PwrGoodOut =1 - dbValue &= ~BIT7; // PwrGoodEnB =0 - WritePMIO (SB_PMIOA_REGBF, AccWidthUint8, &dbValue); - - dbValue = 06; - WriteIO (0xcf9, AccWidthUint8, &dbValue); - SbStall (0xffffffff); -} -#endif - -#ifndef NO_HWM_SUPPORT -/** - * validateImcFirmware - Validate IMC Firmware. - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -hwmInit ( - IN AMDSBCFG* pConfig - ) -{ - RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xB2, AccWidthUint8 | S3_SAVE, 0, 0x55); - RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xB3, AccWidthUint8 | S3_SAVE, 0, 0x55); - RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x91, AccWidthUint8 | S3_SAVE, 0, 0x55); - RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x92, AccWidthUint8 | S3_SAVE, 0, 0x55); - - RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x00, AccWidthUint8 | S3_SAVE, 0, 0x06); - RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x10, AccWidthUint8 | S3_SAVE, 0, 0x06); - RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x20, AccWidthUint8 | S3_SAVE, 0, 0x06); - RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x30, AccWidthUint8 | S3_SAVE, 0, 0x06); - RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x40, AccWidthUint8 | S3_SAVE, 0, 0x06); - - RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x66, AccWidthUint8 | S3_SAVE, 0, 0x01); - RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x6B, AccWidthUint8 | S3_SAVE, 0, 0x01); - RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x70, AccWidthUint8 | S3_SAVE, 0, 0x01); - RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x75, AccWidthUint8 | S3_SAVE, 0, 0x01); - RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x7A, AccWidthUint8 | S3_SAVE, 0, 0x01); - - RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xF8, AccWidthUint8 | S3_SAVE, 0, 0x05); - RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xF9, AccWidthUint8 | S3_SAVE, 0, 0x06); - RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xFF, AccWidthUint8 | S3_SAVE, 0, 0x42); - RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xE9, AccWidthUint8 | S3_SAVE, 0, 0xFF); - RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xEB, AccWidthUint8 | S3_SAVE, 0, 0x1F); - RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xEF, AccWidthUint8 | S3_SAVE, 0, 0x04); - RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xFB, AccWidthUint8 | S3_SAVE, 0, 0x00); -} -#endif diff --git a/src/vendorcode/amd/cimx/sb800/SBDEF.h b/src/vendorcode/amd/cimx/sb800/SBDEF.h deleted file mode 100644 index 79310fd..0000000 --- a/src/vendorcode/amd/cimx/sb800/SBDEF.h +++ /dev/null @@ -1,261 +0,0 @@ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - - -//AMD Library Routines (AMDLIB.C) -unsigned char getNumberOfCpuCores (OUT void); -unsigned int readAlink (IN unsigned int Index); -void writeAlink (IN unsigned int Index, IN unsigned int Data); -void rwAlink (IN unsigned int Index, IN unsigned int AndMask, IN unsigned int OrMask); - -//AMD Library Routines (LEGACY.C) -unsigned int GetFixUp (OUT void); - -//AMD Library Routines (IOLIB.C) -void ReadIO (IN unsigned short Address, IN unsigned char OpFlag, IN void *Value); -void WriteIO (IN unsigned short Address, IN unsigned char OpFlag, IN void *Value); -void RWIO (IN unsigned short Address, IN unsigned char OpFlag, IN unsigned int Mask, IN unsigned int Data); - - - -//AMD Library Routines (MEMLIB.C) -void ReadMEM (IN unsigned int Address, IN unsigned char OpFlag, IN void* Value); -void WriteMEM (IN unsigned int Address, IN unsigned char OpFlag, IN void* Value); -void RWMEM (IN unsigned int Address, IN unsigned char OpFlag, IN unsigned int Mask, IN unsigned int Data); - -//AMD Library Routines (PCILIB.C) -void ReadPCI (IN unsigned int Address, IN unsigned char OpFlag, IN void *Value); -void WritePCI (IN unsigned int Address, IN unsigned char OpFlag, IN void *Value); -void RWPCI (IN unsigned int Address, IN unsigned char OpFlag, IN unsigned int Mask, IN unsigned int Data); - -//AMD Library Routines (SBPELIB.C) -/** - * Read Southbridge Revision ID cie Base - * - * - * @retval 0xXXXXXXXX Revision ID - * - */ -unsigned char getRevisionID (OUT void); - -/** - * programPciByteTable - Program PCI register by table (8 bits data) - * - * - * - * @param[in] pPciByteTable - Table data pointer - * @param[in] dwTableSize - Table length - * - */ -void programPciByteTable (IN REG8MASK* pPciByteTable, IN unsigned short dwTableSize); - -/** - * programSbAcpiMmioTbl - Program SB ACPI MMIO register by table (8 bits data) - * - * - * - * @param[in] pAcpiTbl - Table data pointer - * - */ -void programSbAcpiMmioTbl (IN AcpiRegWrite *pAcpiTbl); - -/** - * getChipSysMode - Get Chip status - * - * - * @param[in] Value - Return Chip strap status - * StrapStatus [15.0] - SB800 chip Strap Status - * @li <b>0001</b> - Not USED FWH - * @li <b>0002</b> - Not USED LPC ROM - * @li <b>0004</b> - EC enabled - * @li <b>0008</b> - Reserved - * @li <b>0010</b> - Internal Clock mode - * - */ -void getChipSysMode (IN void* Value); - -/** - * Read Southbridge CIMx configuration structure pointer - * - * - * - * @retval 0xXXXXXXXX CIMx configuration structure pointer. - * - */ -AMDSBCFG* getConfigPointer (OUT void); - -//AMD Library Routines (PMIOLIB.C) -/** - * Read PMIO - * - * - * - * @param[in] Address - PMIO Offset value - * @param[in] OpFlag - Access sizes - * @param[in] Value - Read Data Buffer - * - */ -void ReadPMIO (IN unsigned char Address, IN unsigned char OpFlag, IN void* Value); - -/** - * Write PMIO - * - * - * - * @param[in] Address - PMIO Offset value - * @param[in] OpFlag - Access sizes - * @param[in] Value - Write Data Buffer - * - */ -void WritePMIO (IN unsigned char Address, IN unsigned char OpFlag, IN void* Value); - -/** - * RWPMIO - Read/Write PMIO - * - * - * - * @param[in] Address - PMIO Offset value - * @param[in] OpFlag - Access sizes - * @param[in] AndMask - Data And Mask 32 bits - * @param[in] OrMask - Data OR Mask 32 bits - * - */ -void RWPMIO (IN unsigned char Address, IN unsigned char OpFlag, IN unsigned int AndMask, IN unsigned int OrMask); - -//AMD Library Routines (PMIO2LIB.C) - -/** - * Read PMIO2 - * - * - * - * @param[in] Address - PMIO2 Offset value - * @param[in] OpFlag - Access sizes - * @param[in] Value - Read Data Buffer - * - */ -void ReadPMIO2 (IN unsigned char Address, IN unsigned char OpFlag, IN void* Value); - -/** - * Write PMIO 2 - * - * - * - * @param[in] Address - PMIO2 Offset value - * @param[in] OpFlag - Access sizes - * @param[in] Value - Write Data Buffer - * - */ -void WritePMIO2 (IN unsigned char Address, IN unsigned char OpFlag, IN void* Value); - -/** - * RWPMIO2 - Read/Write PMIO2 - * - * - * - * @param[in] Address - PMIO2 Offset value - * @param[in] OpFlag - Access sizes - * @param[in] AndMask - Data And Mask 32 bits - * @param[in] OrMask - Data OR Mask 32 bits - * - */ -void RWPMIO2 (IN unsigned char Address, IN unsigned char OpFlag, IN unsigned int AndMask, IN unsigned int OrMask); -//AMD Library Routines (ECLIB.C) -// ECLIB Routines - -// #ifndef NO_EC_SUPPORT - -/** - * EnterEcConfig - Force EC into Config mode - * - * - * - * - */ -void EnterEcConfig (void); - -/** - * ExitEcConfig - Force EC exit Config mode - * - * - * - * - */ -void ExitEcConfig (void); - -/** - * ReadEC8 - Read EC register data - * - * - * - * @param[in] Address - EC Register Offset Value - * @param[in] Value - Read Data Buffer - * - */ -void ReadEC8 (IN unsigned char Address, IN unsigned char* Value); - -/** - * WriteEC8 - Write date into EC register - * - * - * - * @param[in] Address - EC Register Offset Value - * @param[in] Value - Write Data Buffer - * - */ -void WriteEC8 (IN unsigned char Address, IN unsigned char* Value); - -/** - * RWEC8 - Read/Write EC register - * - * - * - * @param[in] Address - EC Register Offset Value - * @param[in] AndMask - Data And Mask 8 bits - * @param[in] OrMask - Data OR Mask 8 bits - * - */ -void RWEC8 (IN unsigned char Address, IN unsigned char AndMask, IN unsigned char OrMask); - -/** - * IsZoneFuncEnable - check every zone support function with BitMap from user define - * - */ -unsigned char IsZoneFuncEnable ( unsigned short Flag, unsigned char func, unsigned char Zone); - -void sbECfancontrolservice (IN AMDSBCFG* pConfig); -void SBIMCFanInitializeS3 (void); -void GetSbAcpiMmioBase (OUT unsigned int* AcpiMmioBase); -void GetSbAcpiPmBase (OUT unsigned short* AcpiPmBase); - -// #endif - diff --git a/src/vendorcode/amd/cimx/sb800/SBMAIN.c b/src/vendorcode/amd/cimx/sb800/SBMAIN.c deleted file mode 100644 index a494d30..0000000 --- a/src/vendorcode/amd/cimx/sb800/SBMAIN.c +++ /dev/null @@ -1,258 +0,0 @@ -/** - * @file - * - * SB Initialization. - * - * Init IOAPIC/IOMMU/Misc NB features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: CIMx-SB - * @e sub-project: - * @e $Revision:$ @e $Date:$ - * - */ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#include "SBPLATFORM.h" -#include "cbtypes.h" - -#ifndef B1_IMAGE - -/*----------------------------------------------------------------------------------------*/ -/** - * sbBeforePciInit - Config Southbridge before PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ - -VOID -sbBeforePciInit ( - IN AMDSBCFG* pConfig - ) -{ - commonInitEarlyBoot (pConfig); - commonInitEarlyPost (pConfig); -#ifndef NO_EC_SUPPORT - ecInitBeforePciEnum (pConfig); -#endif - usbInitBeforePciEnum (pConfig); // USB POST TIME Only - sataInitBeforePciEnum (pConfig); // Init SATA class code and PHY - gecInitBeforePciEnum (pConfig); // Init GEC - azaliaInitBeforePciEnum (pConfig); // Detect and configure High Definition Audio - sbPcieGppEarlyInit (pConfig); // Gpp port init - abSpecialSetBeforePciEnum (pConfig); - usbDesertPll (pConfig); -} - -/** - * sbAfterPciInit - Config Southbridge after PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -sbAfterPciInit ( - IN AMDSBCFG* pConfig - ) -{ - usbInitAfterPciInit (pConfig); // Init USB MMIO - sataInitAfterPciEnum (pConfig); // SATA port enumeration - gecInitAfterPciEnum (pConfig); - azaliaInitAfterPciEnum (pConfig); // Detect and configure High Definition Audio - -#ifndef NO_HWM_SUPPORT - hwmInit (pConfig); -#endif -} - -/** - * sbMidPostInit - Config Southbridge during middle of POST - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -sbMidPostInit ( - IN AMDSBCFG* pConfig - ) -{ - sataInitMidPost (pConfig); -} - -/*----------------------------------------------------------------------------------------*/ -/** - * sbLatePost - Prepare Southbridge to boot to OS. - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -sbLatePost ( - IN AMDSBCFG* pConfig - ) -{ -// UINT16 dwVar; - BUILDPARAM *pStaticOptions; - pStaticOptions = &(pConfig->BuildParameters); - commonInitLateBoot (pConfig); - sataInitLatePost (pConfig); - gecInitLatePost (pConfig); - hpetInit (pConfig, pStaticOptions); // SB Configure HPET base and enable bit -#ifndef NO_EC_SUPPORT - ecInitLatePost (pConfig); -#endif - sbPcieGppLateInit (pConfig); - -} - -/*----------------------------------------------------------------------------------------*/ -/** - * sbBeforePciRestoreInit - Config Southbridge before ACPI S3 resume PCI config device restore - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ - -VOID -sbBeforePciRestoreInit ( - IN AMDSBCFG* pConfig - ) -{ - pConfig->S3Resume = 1; - commonInitEarlyBoot (pConfig); // set /SMBUS/ACPI/IDE/LPC/PCIB - abLinkInitBeforePciEnum (pConfig); // Set ABCFG registers - usbInitBeforePciEnum (pConfig); // USB POST TIME Only - sataInitBeforePciEnum (pConfig); - gecInitBeforePciEnum (pConfig); // Init GEC - azaliaInitBeforePciEnum (pConfig); // Detect and configure High Definition Audio - sbPcieGppEarlyInit (pConfig); // Gpp port init - abSpecialSetBeforePciEnum (pConfig); -} - -/*----------------------------------------------------------------------------------------*/ -/** - * sbAfterPciRestoreInit - Config Southbridge after ACPI S3 resume PCI config device restore - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ - -VOID -sbAfterPciRestoreInit ( - IN AMDSBCFG* pConfig - ) -{ - BUILDPARAM *pStaticOptions; - - pConfig->S3Resume = 1; - - usbSetPllDuringS3 (pConfig); - pStaticOptions = &(pConfig->BuildParameters); - commonInitLateBoot (pConfig); - sataInitAfterPciEnum (pConfig); - gecInitAfterPciEnum (pConfig); - azaliaInitAfterPciEnum (pConfig); // Detect and configure High Definition Audio - hpetInit (pConfig, pStaticOptions); // SB Configure HPET base and enable bit - sataInitLatePost (pConfig); - c3PopupSetting (pConfig); - -#ifndef NO_HWM_SUPPORT - SBIMCFanInitializeS3 (); -#endif -} - -/*----------------------------------------------------------------------------------------*/ -/** - * sbSmmAcpiOn - Config Southbridge during ACPI_ON - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -sbSmmAcpiOn ( - IN AMDSBCFG* pConfig - ) -{ - // Commented the following code since we need to leave the IRQ1/12 filtering enabled always as per latest - // recommendation in RPR. This is required to fix the keyboard stuck issue when playing games under Windows - AMDSBCFG* pTmp; //lx-dummy for /W4 build - pTmp = pConfig; - - // Disable Power Button SMI - RWMEM (ACPI_MMIO_BASE + SMI_BASE + SB_SMI_REGB2, AccWidthUint8, ~(BIT4 + BIT5), 0); - RWMEM (ACPI_MMIO_BASE + SMI_BASE + SB_SMI_REGAC, AccWidthUint8, ~(BIT6 + BIT7), 0); -} - -#endif - -/*----------------------------------------------------------------------------------------*/ -/** - * Call Back routine. - * - * - * - * @param[in] Func Callback ID. - * @param[in] Data Callback specific data. - * @param[in] pConfig Southbridge configuration structure pointer. - */ -UINT32 -CallBackToOEM ( - IN UINT32 Func, - IN UINT32 Data, - IN AMDSBCFG* pConfig - ) -{ - UINT32 Result; - Result = 0; - if ( pConfig->StdHeader.CALLBACK.CalloutPtr == NULL ) return Result; - Result = (pConfig->StdHeader.CALLBACK.CalloutPtr) ( Func, Data, pConfig); - - return Result; -} - - diff --git a/src/vendorcode/amd/cimx/sb800/SBPELIB.c b/src/vendorcode/amd/cimx/sb800/SBPELIB.c deleted file mode 100644 index 403f21f..0000000 --- a/src/vendorcode/amd/cimx/sb800/SBPELIB.c +++ /dev/null @@ -1,198 +0,0 @@ -/** - * @file - * - * Southbridge IO access common routine - * - * - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: CIMx-SB - * @e sub-project: - * @e $Revision:$ @e $Date:$ - * - */ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#include "SBPLATFORM.h" -#include "cbtypes.h" - -/** - * Read Southbridge Revision ID cie Base - * - * - * @retval 0xXXXXXXXX Revision ID - * - */ -UINT8 -getRevisionID ( - OUT VOID - ) -{ - UINT8 dbVar0; - ReadPCI (((SMBUS_BUS_DEV_FUN << 16) + SB_CFG_REG08), AccWidthUint8, &dbVar0); - return dbVar0; -} - -/*----------------------------------------------------------------------------------------*/ -/** - * programPciByteTable - Program PCI register by table (8 bits data) - * - * - * - * @param[in] pPciByteTable - Table data pointer - * @param[in] dwTableSize - Table length - * - */ -VOID -programPciByteTable ( - IN REG8MASK* pPciByteTable, - IN UINT16 dwTableSize - ) -{ - UINT8 i; - UINT8 dbBusNo; - UINT8 dbDevFnNo; - UINT32 ddBDFR; - - dbBusNo = pPciByteTable->bRegIndex; - dbDevFnNo = pPciByteTable->bANDMask; - pPciByteTable++; - - for ( i = 1; i < dwTableSize; i++ ) { - if ( (pPciByteTable->bRegIndex == 0xFF) && (pPciByteTable->bANDMask == 0xFF) && (pPciByteTable->bORMask == 0xFF) ) { - pPciByteTable++; - dbBusNo = pPciByteTable->bRegIndex; - dbDevFnNo = pPciByteTable->bANDMask; - pPciByteTable++; - i++; - } else { - ddBDFR = (dbBusNo << 24) + (dbDevFnNo << 16) + (pPciByteTable->bRegIndex) ; - RWPCI (ddBDFR, AccWidthUint8 | S3_SAVE, pPciByteTable->bANDMask, pPciByteTable->bORMask); - pPciByteTable++; - } - } -} - -/*----------------------------------------------------------------------------------------*/ -/** - * programSbAcpiMmioTbl - Program SB ACPI MMIO register by table (8 bits data) - * - * - * - * @param[in] pAcpiTbl - Table data pointer - * - */ -VOID -programSbAcpiMmioTbl ( - IN AcpiRegWrite *pAcpiTbl - ) -{ - UINT8 i; - UINT32 ddtempVar; - if (pAcpiTbl != NULL) { - for ( i = 1; pAcpiTbl->MmioBase < 0xf0; i++ ) { - ddtempVar = 0xFED80000 | (pAcpiTbl->MmioBase) << 8 | pAcpiTbl->MmioReg; - RWMEM (ddtempVar, AccWidthUint8, ((pAcpiTbl->DataANDMask) | 0xFFFFFF00), pAcpiTbl->DataOrMask); - pAcpiTbl++; - } - } -} - -/** - * getChipSysMode - Get Chip status - * - * - * @param[in] Value - Return Chip strap status - * StrapStatus [15.0] - SB800 chip Strap Status - * @li <b>0001</b> - Not USED FWH - * @li <b>0002</b> - Not USED LPC ROM - * @li <b>0004</b> - EC enabled - * @li <b>0008</b> - Reserved - * @li <b>0010</b> - Internal Clock mode - * - */ -VOID -getChipSysMode ( - IN VOID* Value - ) -{ - ReadMEM (ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG80, AccWidthUint8, Value); -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Read Southbridge CIMx configuration structure pointer - * - * - * - * @retval 0xXXXXXXXX CIMx configuration structure pointer. - * - */ -AMDSBCFG* -getConfigPointer ( - OUT VOID - ) -{ - UINT8 dbReg; - UINT8 dbValue; - UINT8 i; - UINT32 ddValue; - ddValue = 0; - dbReg = SB_ECMOS_REG08; - - for ( i = 0; i <= 3; i++ ) { - WriteIO (SB_IOMAP_REG72, AccWidthUint8, &dbReg); - ReadIO (SB_IOMAP_REG73, AccWidthUint8, &dbValue); - ddValue |= (dbValue << (i * 8)); - dbReg++; - } - return ( (AMDSBCFG*) (UINTN)ddValue); -} - -/** - * getEfuseStatue - Get Efuse status - * - * - * @param[in] Value - Return Chip strap status - * - */ -VOID -getEfuseStatus ( - IN VOID* Value - ) -{ - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8, AccWidthUint8, ~BIT5, BIT5); - WriteMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGD8, AccWidthUint8, Value); - ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGD8 + 1, AccWidthUint8, Value); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8, AccWidthUint8, ~BIT5, 0); -} diff --git a/src/vendorcode/amd/cimx/sb800/SBPort.c b/src/vendorcode/amd/cimx/sb800/SBPort.c deleted file mode 100644 index 048850d..0000000 --- a/src/vendorcode/amd/cimx/sb800/SBPort.c +++ /dev/null @@ -1,366 +0,0 @@ - -/** - * @file - * - * Southbridge Init during POWER-ON - * - * Prepare Southbridge environment during power on stage. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: CIMx-SB - * @e sub-project: - * @e $Revision:$ @e $Date:$ - * - */ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#include "SBPLATFORM.h" -#include "cbtypes.h" -/** - * sbPorInitPciTable - PCI device registers initial during the power on stage. - */ -const static REG8MASK sbPorInitPciTable[] = -{ - // SATA device - {0x00, SATA_BUS_DEV_FUN, 0}, - {SB_SATA_REG84 + 3, ~BIT2, 0}, - {SB_SATA_REG84 + 1, ~(BIT4 + BIT5), BIT4 + BIT5}, - {SB_SATA_REGA0, ~(BIT2 + BIT3 + BIT4 + BIT5 + BIT6), BIT2 + BIT3 + BIT4 + BIT5}, - {0xFF, 0xFF, 0xFF}, - // LPC Device (Bus 0, Dev 20, Func 3) - {0x00, LPC_BUS_DEV_FUN, 0}, - {SB_LPC_REG48, 0x00, BIT0 + BIT1 + BIT2}, - {SB_LPC_REG7C, 0x00, BIT0 + BIT2}, - {SB_LPC_REGBB, 0xFF, BIT3 + BIT4 + BIT5}, - // A12 set 0xBB [5:3] = 111 to improve SPI timing margin. - // A12 Set 0xBA [6:5] = 11 improve SPI timing margin. (SPI Prefetch enhancement) - {SB_LPC_REGBB, 0xBE, BIT0 + BIT3 + BIT4 + BIT5}, - {SB_LPC_REGBA, 0x9F, BIT5 + BIT6}, - {0xFF, 0xFF, 0xFF}, - // P2P Bridge (Bus 0, Dev 20, Func 4) - {0x00, PCIB_BUS_DEV_FUN, 0}, - {SB_PCIB_REG4B, 0xFF, BIT6 + BIT7 + BIT4}, - // Enable IO but not allocate any IO range. This is for post code display on debug port behind P2P bridge. - {SB_PCIB_REG1C, 0x00, 0xF0}, - {SB_PCIB_REG1D, 0x00, 0x00}, - {SB_PCIB_REG04, 0x00, 0x21}, - {SB_PCIB_REG40, 0xDF, 0x20}, - {SB_PCIB_REG50, 0x02, 0x01}, - {0xFF, 0xFF, 0xFF}, -}; - -/** - * sbPmioPorInitTable - Southbridge ACPI MMIO initial during the power on stage. - */ -const static AcpiRegWrite sbPmioPorInitTable[] = -{ - {PMIO_BASE >> 8, SB_PMIOA_REG5D, 0x00, BIT0}, - {PMIO_BASE >> 8, SB_PMIOA_REGD2, 0xCF, BIT4 + BIT5}, - {SMBUS_BASE >> 8, SB_SMBUS_REG12, 0x00, BIT0}, - {PMIO_BASE >> 8, SB_PMIOA_REG28, 0xFF, BIT0}, - {PMIO_BASE >> 8, SB_PMIOA_REG44 + 3, 0x7F, BIT7}, - {PMIO_BASE >> 8, SB_PMIOA_REG48, 0xFF, BIT0}, - {PMIO_BASE >> 8, SB_PMIOA_REG00, 0xFF, 0x0E}, - {PMIO_BASE >> 8, SB_PMIOA_REG00 + 2, 0xFF, 0x40}, - {PMIO_BASE >> 8, SB_PMIOA_REG00 + 3, 0xFF, 0x08}, - {PMIO_BASE >> 8, SB_PMIOA_REG34, 0xEF, BIT0 + BIT1}, - {PMIO_BASE >> 8, SB_PMIOA_REGEC, 0xFD, BIT1}, - {PMIO_BASE >> 8, SB_PMIOA_REG5B, 0xF9, BIT1 + BIT2}, - {PMIO_BASE >> 8, SB_PMIOA_REG08, 0xFE, BIT2 + BIT4}, - {PMIO_BASE >> 8, SB_PMIOA_REG08 + 1, 0xFF, BIT0}, - {PMIO_BASE >> 8, SB_PMIOA_REG54, 0x00, BIT4 + BIT7}, - {PMIO_BASE >> 8, SB_PMIOA_REG04 + 3, 0xFD, BIT1}, - {PMIO_BASE >> 8, SB_PMIOA_REG74, 0xF6, BIT0 + BIT3}, - {PMIO_BASE >> 8, SB_PMIOA_REGF0, ~BIT2, 0x00}, - // RPR GEC I/O Termination Setting - // PM_Reg 0xF6 = Power-on default setting - // PM_Reg 0xF7 = Power-on default setting - // PM_Reg 0xF8 = 0x6C - // PM_Reg 0xF9 = 0x21 - // PM_Reg 0xFA = 0x00 SB800 A12 GEC I/O Pad settings for 3.3V CMOS - {PMIO_BASE >> 8, SB_PMIOA_REGF8, 0x00, 0x6C}, - {PMIO_BASE >> 8, SB_PMIOA_REGF8 + 1, 0x00, 0x27}, - {PMIO_BASE >> 8, SB_PMIOA_REGF8 + 2, 0x00, 0x00}, - {PMIO_BASE >> 8, SB_PMIOA_REGC4, 0xFE, 0x14}, - {PMIO_BASE >> 8, SB_PMIOA_REGC0 + 2, 0xBF, 0x40}, - - {PMIO_BASE >> 8, SB_PMIOA_REGBE, 0xDF, BIT5},//ENH210907 SB800: request to no longer clear kb_pcirst_en (bit 1) of PM_Reg BEh per the RPR - - {0xFF, 0xFF, 0xFF, 0xFF}, -}; - -/** - * sbPowerOnInit - Config Southbridge during power on stage. - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -sbPowerOnInit ( - IN AMDSBCFG* pConfig - ) -{ - - UINT8 dbPortStatus; - UINT8 dbSysConfig; - UINT32 abValue; - UINT8 dbValue; - UINT8 dbEfuse; - UINT8 dbCg2WR; - UINT8 dbCg1Pll; - UINT8 cimNbSbGen2; - UINT8 cimSataMode; - UINT8 cimSpiFastReadEnable; - UINT8 cimSpiFastReadSpeed; - UINT8 cimSioHwmPortEnable; - UINT8 SataPortNum; - - cimNbSbGen2 = pConfig->NbSbGen2; - cimSataMode = pConfig->SATAMODE.SataModeReg; -// Adding Fast Read Function support - if (pConfig->BuildParameters.SpiFastReadEnable != 0 ) { - cimSpiFastReadEnable = (UINT8) pConfig->BuildParameters.SpiFastReadEnable; - } else { - cimSpiFastReadEnable = cimSpiFastReadEnableDefault; - } - cimSpiFastReadSpeed = (UINT8) pConfig->BuildParameters.SpiFastReadSpeed; - cimSioHwmPortEnable = pConfig->SioHwmPortEnable; -#if SB_CIMx_PARAMETER == 0 - cimNbSbGen2 = cimNbSbGen2Default; - cimSataMode = (UINT8) ((cimSataMode & 0xFB) | cimSataSetMaxGen2Default); - cimSataMode = (UINT8) ((cimSataMode & 0x0F) | (cimSATARefClkSelDefault + cimSATARefDivSelDefault)); - cimSpiFastReadEnable = cimSpiFastReadEnableDefault; - cimSpiFastReadSpeed = cimSpiFastReadSpeedDefault; - cimSioHwmPortEnable = cimSioHwmPortEnableDefault; -#endif - -// SB800 Only Enabled (Mmio_mem_enablr) // Default value is correct - RWPMIO (SB_PMIOA_REG24, AccWidthUint8, 0xFF, BIT0); - -// Set A-Link bridge access address. This address is set at device 14h, function 0, -// register 0f0h. This is an I/O address. The I/O address must be on 16-byte boundary. - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGE0, AccWidthUint32, 00, ALINK_ACCESS_INDEX); - writeAlink (0x80000004, 0x04); // RPR 4.2 Enable SB800 to issue memory read/write requests in the upstream direction - abValue = readAlink (SB_ABCFG_REG9C | (UINT32) (ABCFG << 29)); // RPR 4.5 Disable the credit variable in the downstream arbitration equation - abValue = abValue | BIT0; - writeAlink (SB_ABCFG_REG9C | (UINT32) (ABCFG << 29), abValue); - writeAlink (0x30, 0x10); // AXINDC 0x10[9]=1, Enabling Non-Posted memory write for K8 platform. - writeAlink (0x34, readAlink (0x34) | BIT9); - - dbEfuse = FUSE_ID_EFUSE_LOC; - getEfuseStatus (&dbEfuse); - if ( dbEfuse == M1_D1_FUSE_ID ) { - dbEfuse = MINOR_ID_EFUSE_LOC; - getEfuseStatus (&dbEfuse); - if ( dbEfuse == M1_MINOR_ID ) { - // Limit ALink speed to 2.5G if Hudson-M1 - cimNbSbGen2 = 0; - } - } -// Step 1: -// AXINDP_Reg 0xA4[0] = 0x1 -// Step 2: -// AXCFG_Reg 0x88[3:0] = 0x2 -// Step3: -// AXINDP_Reg 0xA4[18] = 0x1 - if ( cimNbSbGen2 == TRUE ) { - rwAlink (SB_AX_INDXP_REGA4, 0xFFFFFFFF, BIT0); - rwAlink ((UINT32)SB_AX_CFG_REG88, 0xFFFFFFF0, 0x2); - rwAlink (SB_AX_INDXP_REGA4, 0xFFFFFFFF, BIT18); - } - -// Set Build option into SB - WritePCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG64, AccWidthUint16 | S3_SAVE, &(pConfig->BuildParameters.SioPmeBaseAddress)); - if (cimSioHwmPortEnable) { - // Use Wide IO Port 1 to provide access to the superio HWM registers. - WritePCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG66 , AccWidthUint16 | S3_SAVE, &(pConfig->BuildParameters.SioHwmBaseAddress)); - RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG48 + 3, AccWidthUint8 | S3_SAVE, 0xFF, BIT0); // Wide IO Port 1: enable - RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG74 , AccWidthUint8 | S3_SAVE, 0xFF, BIT2); // set width 0:512, 1:16 bytes - } - RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA0, AccWidthUint32 | S3_SAVE, 0x001F, (pConfig->BuildParameters.SpiRomBaseAddress)); - RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG9C, AccWidthUint32 | S3_SAVE, 0, (pConfig->BuildParameters.GecShadowRomBase + 1)); -// Enabled SMBUS0/SMBUS1 (ASF) Base Address - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG2C, AccWidthUint16, 06, (pConfig->BuildParameters.Smbus0BaseAddress) + BIT0); //protect BIT[2:1] - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG28, AccWidthUint16, 00, (pConfig->BuildParameters.Smbus1BaseAddress)); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG60, AccWidthUint16, 00, (pConfig->BuildParameters.AcpiPm1EvtBlkAddr)); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG62, AccWidthUint16, 00, (pConfig->BuildParameters.AcpiPm1CntBlkAddr)); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG64, AccWidthUint16, 00, (pConfig->BuildParameters.AcpiPmTmrBlkAddr)); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG66, AccWidthUint16, 00, (pConfig->BuildParameters.CpuControlBlkAddr)); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG68, AccWidthUint16, 00, (pConfig->BuildParameters.AcpiGpe0BlkAddr)); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG6A, AccWidthUint16, 00, (pConfig->BuildParameters.SmiCmdPortAddr)); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG6C, AccWidthUint16, 00, (pConfig->BuildParameters.AcpiPmaCntBlkAddr)); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG6E, AccWidthUint16, 00, (pConfig->BuildParameters.SmiCmdPortAddr) + 8); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG48, AccWidthUint32, 00, (pConfig->BuildParameters.WatchDogTimerBase)); - - dbEfuse = SATA_FIS_BASE_EFUSE_LOC; - getEfuseStatus (&dbEfuse); - - programSbAcpiMmioTbl ((AcpiRegWrite*) FIXUP_PTR (&sbPmioPorInitTable[0])); - - - SataPortNum = 0; - for ( SataPortNum = 0; SataPortNum < 0x06; SataPortNum++ ) { - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8, 0xFF, 1 << SataPortNum); - SbStall (2); - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8, (0xFF ^ (1 << SataPortNum)) , 0x00); - SbStall (2); - } - - - //The following bits must be set before enabling SPI prefetch. - // Set SPI MMio bit offset 00h[19] to 1 and offset 00h[26:24] to 111, offset 0ch[21:16] to 1, Set LPC cfg BBh[6] to 0 ( by default it is 0). - // if Ec is enable - // Maximum spi speed that can be supported by SB is 22M (SPI Mmio offset 0ch[13:12] to 10) if the rom can run at the speed. - // else - // Maximum spi speed that can be supported by SB is 33M (SPI Mmio offset 0ch[13:12] to 01 in normal mode or offset 0ch[15:14] in fast mode) if the rom can run at - // the speed. - getChipSysMode (&dbSysConfig); - if (pConfig->BuildParameters.SpiSpeed < 0x02) { - pConfig->BuildParameters.SpiSpeed = 0x01; - if (dbSysConfig & ChipSysEcEnable) pConfig->BuildParameters.SpiSpeed = 0x02; - } - - if (pConfig->SbSpiSpeedSupport) { - RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG00, AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, (BIT19 + BIT24 + BIT25 + BIT26)); - RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG0C, AccWidthUint32 | S3_SAVE, 0xFFC0FFFF, 1 << 16 ); - RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG0C, AccWidthUint16 | S3_SAVE, ~(BIT13 + BIT12), (pConfig->BuildParameters.SpiSpeed << 12)); - } - // SPI Fast Read Function - if ( cimSpiFastReadEnable ) { - RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG00, AccWidthUint32 | S3_SAVE, 0xFFFBFFFF, BIT18); - } else { - RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG00, AccWidthUint32 | S3_SAVE, 0xFFFBFFFF, 0x00); - } - - if ( cimSpiFastReadSpeed ) { - RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG0C, AccWidthUint16 | S3_SAVE, ~(BIT15 + BIT14), ( cimSpiFastReadSpeed << 14)); - } - //Program power on pci init table - programPciByteTable ( (REG8MASK*) FIXUP_PTR (&sbPorInitPciTable[0]), sizeof (sbPorInitPciTable) / sizeof (REG8MASK) ); - - programSbAcpiMmioTbl ((AcpiRegWrite *) (pConfig->OEMPROGTBL.OemProgrammingTablePtr_Ptr)); - - dbValue = 0x0A; - WriteIO (SB_IOMAP_REG70, AccWidthUint8, &dbValue); - ReadIO (SB_IOMAP_REG71, AccWidthUint8, &dbValue); - dbValue &= 0xEF; - WriteIO (SB_IOMAP_REG71, AccWidthUint8, &dbValue); - -// Change the CG PLL multiplier to x1.1 - if ( pConfig->UsbRxMode !=0 ) { - dbCg2WR = 0x00; - dbCg1Pll = 0x3A; - ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8, AccWidthUint8, &dbCg2WR); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGD8, AccWidthUint8, 0, 0x3A); - ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGD9, AccWidthUint8, &dbCg1Pll); - dbCg2WR &= BIT4; - if (( dbCg2WR == 0x00 ) && ( dbCg1Pll !=0x10 )) - { - RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x18, AccWidthUint8, 0xE1, 0x10); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGD8, AccWidthUint8, 0, 0x3A); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGD9, AccWidthUint8, 0, USB_PLL_Voltage); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8, AccWidthUint8, 0xEF, 0x10); - dbValue = 0x06; - WriteIO (0xCF9, AccWidthUint8, &dbValue); - } else { - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8, AccWidthUint8, 0xEF, 0x00); - } - } - - RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG6C, AccWidthUint32 | S3_SAVE, ~(pConfig->BuildParameters.BiosSize << 4), 0); - - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGDA, AccWidthUint8, 0, (pConfig->SATAMODE.SataModeReg) & 0xFD ); - - if (dbEfuse & BIT0) { - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGDA, AccWidthUint8, 0xFB, 0x04); - } - - ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGDA, AccWidthUint8, &dbPortStatus); - if ( ((dbPortStatus & 0xF0) == 0x10) ) { - RWMEM (ACPI_MMIO_BASE + MISC_BASE + SB_PMIOA_REG08, AccWidthUint8, 0, BIT5); - } - - if ( pConfig->BuildParameters.LegacyFree ) { - RWPCI (((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG44), AccWidthUint32 | S3_SAVE, 00, 0x0003C000); - } else { - RWPCI (((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG44), AccWidthUint32 | S3_SAVE, 00, 0xFF03FFD5); - } - - dbValue = 0x09; - WriteIO (SB_IOMAP_REGC00, AccWidthUint8, &dbValue); - ReadIO (SB_IOMAP_REGC01, AccWidthUint8, &dbValue); - if ( !pConfig->BuildParameters.EcKbd ) { - // Route SIO IRQ1/IRQ12 to USB IRQ1/IRQ12 input - dbValue = dbValue & 0xF9; - } - if ( pConfig->BuildParameters.LegacyFree ) { - // Disable IRQ1/IRQ12 filter enable for Legacy free with USB KBC emulation. - dbValue = dbValue & 0x9F; - } - // Enabled IRQ input - dbValue = dbValue | BIT4; - WriteIO (SB_IOMAP_REGC01, AccWidthUint8, &dbValue); - -#ifndef NO_EC_SUPPORT - getChipSysMode (&dbPortStatus); - if ( ((dbPortStatus & ChipSysEcEnable) == 0x00) ) { - // EC is disabled by jumper setting or board config - RWPCI (((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4), AccWidthUint16 | S3_SAVE, 0xFFFE, BIT0); - } else { - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC4, AccWidthUint8, 0xF7, 0x08); - ecPowerOnInit ( pConfig); - } -#endif - - ReadMEM (ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG80, AccWidthUint8, &dbValue); - if (dbValue & ChipSysIntClkGen) { - ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC4, AccWidthUint8, &dbValue); - if (dbValue & BIT2) { - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC0 + 2, AccWidthUint8, 0xDF, 0x20); - } else { - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC4, AccWidthUint8, 0xFB, 0x40); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC0 + 2, AccWidthUint8, 0xDF, 0x20); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC4, AccWidthUint8, 0xFB, 0x00); - } - } - - // Restore GPP clock to on as it may be off during last POST when some device was disabled; - // the device can't be detected if enabled again as the values retain on S5 and warm reset. - RWMEM (ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG00, AccWidthUint32, 0xFFFFFFFF, 0xFFFFFFFF); - RWMEM (ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG04, AccWidthUint8, 0xFF, 0xFF); - - // Set PMx88[5]to enable LdtStp# output to do the C3 or FidVid transation - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG88, AccWidthUint8, 0xFF, BIT5); -} diff --git a/src/vendorcode/amd/cimx/sb800/SBSUBFUN.h b/src/vendorcode/amd/cimx/sb800/SBSUBFUN.h deleted file mode 100644 index 6b8c8d4..0000000 --- a/src/vendorcode/amd/cimx/sb800/SBSUBFUN.h +++ /dev/null @@ -1,523 +0,0 @@ -/** - * @file - * - * Southbridge CIMx Function Support Define (All) - * - * - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: CIMx-SB - * @e sub-project: - * @e $Revision:$ @e $Date:$ - * - */ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -// Southbridge SBMAIN Routines - -/** - * Southbridge Main Function Public Function - * - */ - -/** - * sbBeforePciInit - Config Southbridge before PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void sbBeforePciInit (IN AMDSBCFG* pConfig); - - -/** - * sbAfterPciInit - Config Southbridge after PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void sbAfterPciInit (IN AMDSBCFG* pConfig); - -/** - * sbMidPostInit - Config Southbridge during middle of POST - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void sbMidPostInit (IN AMDSBCFG* pConfig); - -/** - * sbLatePost - Prepare Southbridge to boot to OS. - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void sbLatePost (IN AMDSBCFG* pConfig); - -/** - * sbBeforePciRestoreInit - Config Southbridge before ACPI S3 resume PCI config device restore - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void sbBeforePciRestoreInit (IN AMDSBCFG* pConfig); - -/** - * sbAfterPciRestoreInit - Config Southbridge after ACPI S3 resume PCI config device restore - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void sbAfterPciRestoreInit (IN AMDSBCFG* pConfig); - -/** - * sbSmmAcpiOn - Config Southbridge during ACPI_ON - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void sbSmmAcpiOn (IN AMDSBCFG* pConfig); - -/** - * CallBackToOEM - Call Back routine. - * - * - * - * @param[in] Func Callback ID. - * @param[in] Data Callback specific data. - * @param[in] pConfig Southbridge configuration structure pointer. - */ -unsigned int CallBackToOEM (IN unsigned int Func, IN unsigned int Data, IN AMDSBCFG* pConfig); - - -// Southbridge SBPOR Routines - -/** - * Southbridge power-on initial Public Function - * - */ - -/** - * sbPowerOnInit - Config Southbridge during power on stage. - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void sbPowerOnInit (IN AMDSBCFG* pConfig); - - -// Southbridge Common Routines - -/** - * Southbridge Common Public Function - * - */ - -/** - * commonInitEarlyBoot - Config Southbridge SMBUS/ACPI/IDE/LPC/PCIB. - * - * This settings should be done during S3 resume also - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void commonInitEarlyBoot (IN AMDSBCFG* pConfig); - -/** - * commonInitEarlyPost - Config Southbridge SMBUS/ACPI/IDE/LPC/PCIB. - * - * This settings might not program during S3 resume - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void commonInitEarlyPost (IN AMDSBCFG* pConfig); - -/** - * commonInitLateBoot - Prepare Southbridge register setting to boot to OS. - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void commonInitLateBoot (IN AMDSBCFG* pConfig); - -/** - * abSpecialSetBeforePciEnum - Special setting ABCFG registers before PCI emulation. - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void abSpecialSetBeforePciEnum (IN AMDSBCFG* pConfig); - -void usbSetPllDuringS3 (IN AMDSBCFG* pConfig); -void usbDesertPll (IN AMDSBCFG* pConfig); - -/** - * hpetInit - Program Southbridge HPET function - * - * ** Eric - * - * @param[in] pConfig Southbridge configuration structure pointer. - * @param[in] pStaticOptions Platform build configuration table. - * - */ -void hpetInit (IN AMDSBCFG* pConfig, IN BUILDPARAM *pStaticOptions); - -/** - * c3PopupSetting - Program Southbridge C state function - * - * ** Eric - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void c3PopupSetting (IN AMDSBCFG* pConfig); - -/** - * FusionRelatedSetting - Program Fusion C related function - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void FusionRelatedSetting (IN AMDSBCFG* pConfig); - -/** - * Southbridge Common Private Function - * - */ - -/** - * abLinkInitBeforePciEnum - Set ABCFG registers before PCI emulation. - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void abLinkInitBeforePciEnum (IN AMDSBCFG* pConfig); - -// Southbridge SATA Routines - -/** - * Southbridge SATA Controller Public Function - * - */ - -/** - * sataInitMidPost - Config SATA controller in Middle POST. - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void sataInitMidPost (IN AMDSBCFG* pConfig); - -/** - * sataInitAfterPciEnum - Config SATA controller after PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void sataInitAfterPciEnum (IN AMDSBCFG* pConfig); - -/** - * sataInitBeforePciEnum - Config SATA controller before PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void sataInitBeforePciEnum (IN AMDSBCFG* pConfig); - -/** - * sataInitLatePost - Prepare SATA controller to boot to OS. - * - * - Set class ID to AHCI (if set to AHCI * Mode) - * - Enable AHCI interrupt - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void sataInitLatePost (IN AMDSBCFG* pConfig); - -// Southbridge GEC Routines - -/** - * Southbridge GEC Controller Public Function - * - */ - -/** - * gecInitBeforePciEnum - Config GEC controller before PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void gecInitBeforePciEnum (IN AMDSBCFG* pConfig); - -/** - * gecInitAfterPciEnum - Config GEC controller after PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void gecInitAfterPciEnum (IN AMDSBCFG* pConfig); - -/** - * gecInitLatePost - Prepare GEC controller to boot to OS. - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void gecInitLatePost (IN AMDSBCFG* pConfig); - -// Southbridge USB Routines - -/** - * Southbridge USB Controller Public Function - * - */ - -/** - * Config USB controller before PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void usbInitBeforePciEnum (IN AMDSBCFG* pConfig); - -/** - * Config USB controller after PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void usbInitAfterPciInit (IN AMDSBCFG* pConfig); - -/** - * Config USB1 EHCI controller after PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void usb1EhciInitAfterPciInit (IN AMDSBCFG* pConfig); -void usb2EhciInitAfterPciInit (IN AMDSBCFG* pConfig); -void usb3EhciInitAfterPciInit (IN AMDSBCFG* pConfig); -void usb1OhciInitAfterPciInit (IN AMDSBCFG* pConfig); -void usb2OhciInitAfterPciInit (IN AMDSBCFG* pConfig); -void usb3OhciInitAfterPciInit (IN AMDSBCFG* pConfig); -void usb4OhciInitAfterPciInit (IN AMDSBCFG* pConfig); - -// Southbridge SMI Service Routines (SMM.C) - -/** - * Southbridge SMI Service Routines Public Function - * - */ - -/** - * Southbridge SMI service module - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void sbSmmService (IN AMDSBCFG* pConfig); - -/** - * softwareSMIservice - Software SMI service - * - * ** Eric - * - * @param[in] void Southbridge software SMI service ID. - * - */ -void softwareSMIservice (IN void); - -// Southbridge GPP Controller Routines - -/** - * Southbridge GPP Controller Routines Public Function - * - */ - -/** - * GPP early programming and link training. On exit all populated EPs should be fully operational. - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void sbPcieGppEarlyInit (IN AMDSBCFG* pConfig); - -/** - * sbPcieGppLateInit - Late PCIE initialization for SB800 GPP component - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void sbPcieGppLateInit (IN AMDSBCFG* pConfig); - -// Southbridge HD Controller Routines (AZALIA.C) - -/** - * Southbridge HD Controller Routines (AZALIA.C) Public Function - * - */ - -/** - * Config HD Audio Before PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void azaliaInitBeforePciEnum (IN AMDSBCFG* pConfig); - -/** - * Config HD Audio after PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -void azaliaInitAfterPciEnum (IN AMDSBCFG* pConfig); - - -// Southbridge EC Routines - -#ifndef NO_EC_SUPPORT -/** - * Southbridge EC Controller Public Function - * - */ - -/** - * Config EC controller during power-on - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ - void ecPowerOnInit (IN AMDSBCFG* pConfig); - -/** - * Config EC controller before PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ - void ecInitBeforePciEnum (IN AMDSBCFG* pConfig); - -/** - * Prepare EC controller to boot to OS. - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ - void ecInitLatePost (IN AMDSBCFG* pConfig); - -/** - * validateImcFirmware - Validate IMC Firmware. - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - * @retval TRUE Pass - * @retval FALSE Failed - */ - unsigned char validateImcFirmware (IN AMDSBCFG* pConfig); - -/** - * validateImcFirmware - Validate IMC Firmware. - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ - void softwareToggleImcStrapping (IN AMDSBCFG* pConfig); -#endif - -#ifndef NO_HWM_SUPPORT -/** - * validateImcFirmware - Validate IMC Firmware. - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ - void hwmInit (IN AMDSBCFG* pConfig); -#endif - diff --git a/src/vendorcode/amd/cimx/sb800/SBTYPE.h b/src/vendorcode/amd/cimx/sb800/SBTYPE.h deleted file mode 100644 index b897950..0000000 --- a/src/vendorcode/amd/cimx/sb800/SBTYPE.h +++ /dev/null @@ -1,1135 +0,0 @@ - -/** - * @file - * - * Southbridge CIMx configuration structure define - * - * - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: CIMx-SB - * @e sub-project: - * @e $Revision:$ @e $Date:$ - * - */ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#ifndef _AMD_SBTYPE_H_ -#define _AMD_SBTYPE_H_ - -#pragma pack (push, 1) - -/** - * Entry point of Southbridge CIMx - * - * - * @param[in] Param1 Southbridge CIMx Function ID. - * @param[in] Param2 Southbridge Input Data. - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -typedef unsigned int (*SBCIM_HOOK_ENTRY) (unsigned int Param1, unsigned int Param2, void* pConfig); -/** - * SMM_SERVICE_ROUTINE - Southbridge SMI service routine - * - */ -typedef void (*SMM_SERVICE_ROUTINE) (void); - - -/** - * The STATIC platform information for CIMx Module. - * - */ -typedef struct _BUILDPARAM { - unsigned int BiosSize:3; /**< BiosSize - * @par - * BIOSSize [2.0] - BIOS Image Size - * @li <b>0</b> - 1M - * @li <b>1</b> - 2M - * @li <b>3</b> - 4M - * @li <b>7</b> - 8M - * In SB800, default ROM size is 1M Bytes, if your platform ROM bigger then 1M - * you have to set the ROM size outside CIMx module and before AGESA module get call - * - */ - unsigned int LegacyFree:1; /**< LegacyFree - * @par - * Config Southbridge CIMx module for Legacy Free Mode - */ - unsigned int SpiSpeed:2; /**< SpiSpeed - * @par - * SPI Speed [1.0] - the clock speed for non-fast read command - * @li <b>00</b> - 66Mhz - * @li <b>01</b> - 33Mhz - * @li <b>10</b> - 22Mhz - * @li <b>11</b> - 16.5Mhz - * - */ - unsigned int ImcEnableOverWrite:2; /**< ImcEnableOverWrite - * @par - * Imc Enable OverWrite - * @li <b>00</b> - by default strapping - * @li <b>01</b> - On - * @li <b>10</b> - Off - * - */ - unsigned int SpiFastReadEnable:1; /**< SpiFastReadEnable - * @par - * @li <b>00</b> - Disable SPI Fast Read Function - * @li <b>01</b> - Enable SPI Fast Read Function - */ - unsigned int SpiFastReadSpeed:2; /**< SpiFastReadSpeed - * @par - * @li <b>00</b> - 66Mhz - * @li <b>01</b> - 33Mhz - * @li <b>10</b> - 22Mhz - * @li <b>11</b> - 16.5Mhz - */ - unsigned int SpreadSpectrumType:1; /**< SpreadSpectrumType - * @par - * @li <b>0</b> - Spread Spectrum for normal platform - * @li <b>1</b> - Spread Spectrum for Ontario platform - */ -/** Dummy0 - Reserved */ - unsigned int Dummy0:4; - unsigned int EcKbd:1; /**< EcKbd - * @par - * EcKbd [16] - Platform use EC (as SIO) or SIO chip for PS/2 Keyboard and Mouse - * @li <b>0</b> - Use SIO PS/2 function. - * @li <b>1</b> - Use EC PS/2 function instead of SIO PS/2 function. ** - * @li <b>**</b> When set 1, EC function have to enable, otherwise, CIMx treat as legacy-free system. - */ -/** EcChannel0 - Reserved */ - unsigned int EcChannel0:1; -/** UsbMsi - Reserved */ - unsigned int UsbMsi:1; -/** HdAudioMsi - Reserved */ - unsigned int HdAudioMsi:1; -/** LpcMsi - Reserved */ - unsigned int LpcMsi:1; -/** PcibMsi - Reserved */ - unsigned int PcibMsi:1; -/** AbMsi - Reserved */ - unsigned int AbMsi:1; -/** Dummy1 - Reserved */ - unsigned int Dummy1:9; - - unsigned int Smbus0BaseAddress; /**< Smbus0BaseAddress - * @par - * Smbus BASE Address - */ - unsigned int Smbus1BaseAddress; /**< Smbus1BaseAddress - * @par - * Smbus1 (ASF) BASE Address - */ - unsigned int SioPmeBaseAddress; /**< SioPmeBaseAddress - * @par - * SIO PME BASE Address - */ - unsigned int SioHwmBaseAddress; /**< SioHwmBaseAddress - * @par - * SIO HWM BASE Address - */ - unsigned int WatchDogTimerBase; /**< WatchDogTimerBase - * @par - * Watch Dog Timer Address - */ - unsigned int GecShadowRomBase; /**< GecShadowRomBase - * @par - * GEC (NIC) SHADOWROM BASE Address - */ - unsigned int SpiRomBaseAddress; /**< SpiRomBaseAddress - * @par - * SPI ROM BASE Address - */ - unsigned short AcpiPm1EvtBlkAddr; /**< AcpiPm1EvtBlkAddr - * @par - * ACPI PM1 event block Address - */ - unsigned short AcpiPm1CntBlkAddr; /**< AcpiPm1CntBlkAddr - * @par - * ACPI PM1 Control block Address - */ - unsigned short AcpiPmTmrBlkAddr; /**< AcpiPmTmrBlkAddr - * @par - * ACPI PM timer block Address - */ - unsigned short CpuControlBlkAddr; /**< CpuControlBlkAddr - * @par - * ACPI CPU control block Address - */ - unsigned short AcpiGpe0BlkAddr; /**< AcpiGpe0BlkAddr - * @par - * ACPI GPE0 block Address - */ - unsigned short SmiCmdPortAddr; /**< SmiCmdPortAddr - * @par - * SMI command port Address - */ - unsigned short AcpiPmaCntBlkAddr; /**< AcpiPmaCntBlkAddr - * @par - * ACPI PMA Control block Address - */ - unsigned int HpetBase; /**< HpetBase - * @par - * HPET Base address - */ - unsigned int SataIDESsid; /**< SataIDESsid - * @par - * SATA IDE mode SSID - */ - unsigned int SataRAIDSsid; /**< SataRAIDSsid - * @par - * SATA RAID mode SSID - */ - unsigned int SataRAID5Ssid; /**< SataRAID5Ssid - * @par - * SATA RAID5 mode SSID - */ - unsigned int SataAHCISsid; /**< SataAHCISsid - * @par - * SATA AHCI mode SSID - */ - unsigned int OhciSsid; /**< OhciSsid - * @par - * OHCI Controller SSID - */ - unsigned int EhciSsid; /**< EhciSsid - * @par - * EHCI Controller SSID - */ - unsigned int Ohci4Ssid; /**< Ohci4Ssid - * @par - * OHCI4 Controller SSID (Force USB 1.1 mode) - */ - unsigned int SmbusSsid; /**< SmbusSsid - * @par - * SMBUS controller SSID - */ - unsigned int IdeSsid; /**< IdeSsid - * @par - * IDE (Sata) controller SSID - */ - unsigned int AzaliaSsid; /**< AzaliaSsid - * @par - * HD Audio controller SSID - */ - unsigned int LpcSsid; /**< LpcSsid - * @par - * LPC controller SSID - */ - unsigned int PCIBSsid; /**< PCIBSsid - * @par - * PCIB controller SSID - */ -} BUILDPARAM; - -/** - * The EC fan MSGREG struct for CIMx Module. * - */ -typedef struct _EC_struct { - unsigned char MSGFun81zone0MSGREG0; ///<Thermal zone - unsigned char MSGFun81zone0MSGREG1; ///<Thermal zone - unsigned char MSGFun81zone0MSGREG2; ///<Thermal zone control byte 1 - unsigned char MSGFun81zone0MSGREG3; ///<Thermal zone control byte 2 - unsigned char MSGFun81zone0MSGREG4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius. - unsigned char MSGFun81zone0MSGREG5; ///<Hysteresis inforamtion - unsigned char MSGFun81zone0MSGREG6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 - unsigned char MSGFun81zone0MSGREG7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located. - unsigned char MSGFun81zone0MSGREG8; ///< @todo Style_Analyzer: Add Doxygen comments to struct entry - unsigned char MSGFun81zone0MSGREG9; ///< @todo Style_Analyzer: Add Doxygen comments to struct entry - - //EC LDN9 funtion 81 zone 1 - unsigned char MSGFun81zone1MSGREG0; ///<Thermal zone - unsigned char MSGFun81zone1MSGREG1; ///<Thermal zone - unsigned char MSGFun81zone1MSGREG2; ///<Thermal zone control byte 1 - unsigned char MSGFun81zone1MSGREG3; ///<Thermal zone control byte 2 - unsigned char MSGFun81zone1MSGREG4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius. - unsigned char MSGFun81zone1MSGREG5; ///<Hysteresis inforamtion - unsigned char MSGFun81zone1MSGREG6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 - unsigned char MSGFun81zone1MSGREG7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located. - unsigned char MSGFun81zone1MSGREG8; ///< @todo Style_Analyzer: Add Doxygen comments to struct entry - unsigned char MSGFun81zone1MSGREG9; ///< @todo Style_Analyzer: Add Doxygen comments to struct entry - - //EC LDN9 funtion 81 zone 2 - unsigned char MSGFun81zone2MSGREG0; ///<Thermal zone - unsigned char MSGFun81zone2MSGREG1; ///<Thermal zone - unsigned char MSGFun81zone2MSGREG2; ///<Thermal zone control byte 1 - unsigned char MSGFun81zone2MSGREG3; ///<Thermal zone control byte 2 - unsigned char MSGFun81zone2MSGREG4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius. - unsigned char MSGFun81zone2MSGREG5; ///<Hysteresis inforamtion - unsigned char MSGFun81zone2MSGREG6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 - unsigned char MSGFun81zone2MSGREG7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located. - unsigned char MSGFun81zone2MSGREG8; ///< @todo Style_Analyzer: Add Doxygen comments to struct entry - unsigned char MSGFun81zone2MSGREG9; ///< @todo Style_Analyzer: Add Doxygen comments to struct entry - - //EC LDN9 funtion 81 zone 3 - unsigned char MSGFun81zone3MSGREG0; ///<Thermal zone - unsigned char MSGFun81zone3MSGREG1; ///<Thermal zone - unsigned char MSGFun81zone3MSGREG2; ///<Thermal zone control byte 1 - unsigned char MSGFun81zone3MSGREG3; ///<Thermal zone control byte 2 - unsigned char MSGFun81zone3MSGREG4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius. - unsigned char MSGFun81zone3MSGREG5; ///<Hysteresis inforamtion - unsigned char MSGFun81zone3MSGREG6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 - unsigned char MSGFun81zone3MSGREG7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located. - unsigned char MSGFun81zone3MSGREG8; ///< @todo Style_Analyzer: Add Doxygen comments to struct entry - unsigned char MSGFun81zone3MSGREG9; ///< @todo Style_Analyzer: Add Doxygen comments to struct entry - - //EC LDN9 funtion 83 zone 0 - unsigned char MSGFun83zone0MSGREG0; ///<Thermal zone - unsigned char MSGFun83zone0MSGREG1; ///<Thermal zone - unsigned char MSGFun83zone0MSGREG2; ///<_AC0 - unsigned char MSGFun83zone0MSGREG3; ///<_AC1 - unsigned char MSGFun83zone0MSGREG4; ///<_AC2 - unsigned char MSGFun83zone0MSGREG5; ///<_AC3 - unsigned char MSGFun83zone0MSGREG6; ///<_AC4 - unsigned char MSGFun83zone0MSGREG7; ///<_AC5 - unsigned char MSGFun83zone0MSGREG8; ///<_AC6 - unsigned char MSGFun83zone0MSGREG9; ///<_AC7 - unsigned char MSGFun83zone0MSGREGA; ///<_CRT - unsigned char MSGFun83zone0MSGREGB; ///<_PSV - - //EC LDN9 funtion 83 zone 1 - unsigned char MSGFun83zone1MSGREG0; ///<Thermal zone - unsigned char MSGFun83zone1MSGREG1; ///<Thermal zone - unsigned char MSGFun83zone1MSGREG2; ///<_AC0 - unsigned char MSGFun83zone1MSGREG3; ///<_AC1 - unsigned char MSGFun83zone1MSGREG4; ///<_AC2 - unsigned char MSGFun83zone1MSGREG5; ///<_AC3 - unsigned char MSGFun83zone1MSGREG6; ///<_AC4 - unsigned char MSGFun83zone1MSGREG7; ///<_AC5 - unsigned char MSGFun83zone1MSGREG8; ///<_AC6 - unsigned char MSGFun83zone1MSGREG9; ///<_AC7 - unsigned char MSGFun83zone1MSGREGA; ///<_CRT - unsigned char MSGFun83zone1MSGREGB; ///<_PSV - - //EC LDN9 funtion 83 zone 2 - unsigned char MSGFun83zone2MSGREG0; ///<Thermal zone - unsigned char MSGFun83zone2MSGREG1; ///<Thermal zone - unsigned char MSGFun83zone2MSGREG2; ///<_AC0 - unsigned char MSGFun83zone2MSGREG3; ///<_AC1 - unsigned char MSGFun83zone2MSGREG4; ///<_AC2 - unsigned char MSGFun83zone2MSGREG5; ///<_AC3 - unsigned char MSGFun83zone2MSGREG6; ///<_AC4 - unsigned char MSGFun83zone2MSGREG7; ///<_AC5 - unsigned char MSGFun83zone2MSGREG8; ///<_AC6 - unsigned char MSGFun83zone2MSGREG9; ///<_AC7 - unsigned char MSGFun83zone2MSGREGA; ///<_CRT - unsigned char MSGFun83zone2MSGREGB; ///<_PSV - - //EC LDN9 funtion 83 zone 3 - unsigned char MSGFun83zone3MSGREG0; ///<Thermal zone - unsigned char MSGFun83zone3MSGREG1; ///<Thermal zone - unsigned char MSGFun83zone3MSGREG2; ///<_AC0 - unsigned char MSGFun83zone3MSGREG3; ///<_AC1 - unsigned char MSGFun83zone3MSGREG4; ///<_AC2 - unsigned char MSGFun83zone3MSGREG5; ///<_AC3 - unsigned char MSGFun83zone3MSGREG6; ///<_AC4 - unsigned char MSGFun83zone3MSGREG7; ///<_AC5 - unsigned char MSGFun83zone3MSGREG8; ///<_AC6 - unsigned char MSGFun83zone3MSGREG9; ///<_AC7 - unsigned char MSGFun83zone3MSGREGA; ///<_CRT - unsigned char MSGFun83zone3MSGREGB; ///<_PSV - - //EC LDN9 funtion 85 zone 0 - unsigned char MSGFun85zone0MSGREG0; ///<Thermal zone - unsigned char MSGFun85zone0MSGREG1; ///<Thermal zone - unsigned char MSGFun85zone0MSGREG2; ///<AL0 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone0MSGREG3; ///<AL1 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone0MSGREG4; ///<AL2 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone0MSGREG5; ///<AL3 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone0MSGREG6; ///<AL4 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone0MSGREG7; ///<AL5 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone0MSGREG8; ///<AL6 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone0MSGREG9; ///<AL7 PWM level in percentage (0 - 100%) - - //EC LDN9 funtion 85 zone 1 - unsigned char MSGFun85zone1MSGREG0; ///<Thermal zone - unsigned char MSGFun85zone1MSGREG1; ///<Thermal zone - unsigned char MSGFun85zone1MSGREG2; ///<AL0 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone1MSGREG3; ///<AL1 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone1MSGREG4; ///<AL2 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone1MSGREG5; ///<AL3 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone1MSGREG6; ///<AL4 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone1MSGREG7; ///<AL5 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone1MSGREG8; ///<AL6 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone1MSGREG9; ///<AL7 PWM level in percentage (0 - 100%) - - //EC LDN9 funtion 85 zone 2 - unsigned char MSGFun85zone2MSGREG0; ///<Thermal zone - unsigned char MSGFun85zone2MSGREG1; ///<Thermal zone - unsigned char MSGFun85zone2MSGREG2; ///<AL0 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone2MSGREG3; ///<AL1 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone2MSGREG4; ///<AL2 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone2MSGREG5; ///<AL3 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone2MSGREG6; ///<AL4 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone2MSGREG7; ///<AL5 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone2MSGREG8; ///<AL6 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone2MSGREG9; ///<AL7 PWM level in percentage (0 - 100%) - - //EC LDN9 funtion 85 zone 3 - unsigned char MSGFun85zone3MSGREG0; ///<Thermal zone - unsigned char MSGFun85zone3MSGREG1; ///<Thermal zone - unsigned char MSGFun85zone3MSGREG2; ///<AL0 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone3MSGREG3; ///<AL1 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone3MSGREG4; ///<AL2 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone3MSGREG5; ///<AL3 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone3MSGREG6; ///<AL4 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone3MSGREG7; ///<AL5 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone3MSGREG8; ///<AL6 PWM level in percentage (0 - 100%) - unsigned char MSGFun85zone3MSGREG9; ///<AL7 PWM level in percentage (0 - 100%) - - //EC LDN9 funtion 89 TEMPIN channel 0 - unsigned char MSGFun89zone0MSGREG0; ///<Thermal zone - unsigned char MSGFun89zone0MSGREG1; ///<Thermal zone - unsigned char MSGFun89zone0MSGREG2; ///<At DWORD bit 0-7 - unsigned char MSGFun89zone0MSGREG3; ///<At DWORD bit 15-8 - unsigned char MSGFun89zone0MSGREG4; ///<At DWORD bit 23-16 - unsigned char MSGFun89zone0MSGREG5; ///<At DWORD bit 31-24 - unsigned char MSGFun89zone0MSGREG6; ///<Ct DWORD bit 0-7 - unsigned char MSGFun89zone0MSGREG7; ///<Ct DWORD bit 15-8 - unsigned char MSGFun89zone0MSGREG8; ///<Ct DWORD bit 23-16 - unsigned char MSGFun89zone0MSGREG9; ///<Ct DWORD bit 31-24 - unsigned char MSGFun89zone0MSGREGA; ///<Mode bit 0-7 - - //EC LDN9 funtion 89 TEMPIN channel 1 - unsigned char MSGFun89zone1MSGREG0; ///<Thermal zone - unsigned char MSGFun89zone1MSGREG1; ///<Thermal zone - unsigned char MSGFun89zone1MSGREG2; ///<At DWORD bit 0-7 - unsigned char MSGFun89zone1MSGREG3; ///<At DWORD bit 15-8 - unsigned char MSGFun89zone1MSGREG4; ///<At DWORD bit 23-16 - unsigned char MSGFun89zone1MSGREG5; ///<At DWORD bit 31-24 - unsigned char MSGFun89zone1MSGREG6; ///<Ct DWORD bit 0-7 - unsigned char MSGFun89zone1MSGREG7; ///<Ct DWORD bit 15-8 - unsigned char MSGFun89zone1MSGREG8; ///<Ct DWORD bit 23-16 - unsigned char MSGFun89zone1MSGREG9; ///<Ct DWORD bit 31-24 - unsigned char MSGFun89zone1MSGREGA; ///<Mode bit 0-7 - - //EC LDN9 funtion 89 TEMPIN channel 2 - unsigned char MSGFun89zone2MSGREG0; ///<Thermal zone - unsigned char MSGFun89zone2MSGREG1; ///<Thermal zone - unsigned char MSGFun89zone2MSGREG2; ///<At DWORD bit 0-7 - unsigned char MSGFun89zone2MSGREG3; ///<At DWORD bit 15-8 - unsigned char MSGFun89zone2MSGREG4; ///<At DWORD bit 23-16 - unsigned char MSGFun89zone2MSGREG5; ///<At DWORD bit 31-24 - unsigned char MSGFun89zone2MSGREG6; ///<Ct DWORD bit 0-7 - unsigned char MSGFun89zone2MSGREG7; ///<Ct DWORD bit 15-8 - unsigned char MSGFun89zone2MSGREG8; ///<Ct DWORD bit 23-16 - unsigned char MSGFun89zone2MSGREG9; ///<Ct DWORD bit 31-24 - unsigned char MSGFun89zone2MSGREGA; ///<Mode bit 0-7 - - //EC LDN9 funtion 89 TEMPIN channel 3 - unsigned char MSGFun89zone3MSGREG0; ///<Thermal zone - unsigned char MSGFun89zone3MSGREG1; ///<Thermal zone - unsigned char MSGFun89zone3MSGREG2; ///<At DWORD bit 0-7 - unsigned char MSGFun89zone3MSGREG3; ///<At DWORD bit 15-8 - unsigned char MSGFun89zone3MSGREG4; ///<At DWORD bit 23-16 - unsigned char MSGFun89zone3MSGREG5; ///<At DWORD bit 31-24 - unsigned char MSGFun89zone3MSGREG6; ///<Ct DWORD bit 0-7 - unsigned char MSGFun89zone3MSGREG7; ///<Ct DWORD bit 15-8 - unsigned char MSGFun89zone3MSGREG8; ///<Ct DWORD bit 23-16 - unsigned char MSGFun89zone3MSGREG9; ///<Ct DWORD bit 31-24 - unsigned char MSGFun89zone3MSGREGA; ///<Mode bit 0-7 - - // FLAG for Fun83/85/89 support - unsigned short IMCFUNSupportBitMap; /// Bit0=81FunZone0 support(1=On;0=Off); bit1-3=81FunZone1-Zone3;Bit4-7=83FunZone0-Zone3;Bit8-11=85FunZone0-Zone3;Bit11-15=89FunZone0-Zone3; -} EC_struct; -/** SBGPPPORTCONFIG - Southbridge GPP port config structure */ -typedef struct { - unsigned int PortPresent:1; /**< Port connection - * @par - * @li <b>0</b> - Port doesn't have slot. No need to train the link - * @li <b>1</b> - Port connection defined and needs to be trained - */ - unsigned int PortDetected:1; /**< Link training status - * @par - * @li <b>0</b> - EP not detected - * @li <b>1</b> - EP detected - */ - unsigned int PortIsGen2:2; /**< Port link speed configuration - * @par - * @li <b>00</b> - Auto - * @li <b>01</b> - Forced GEN1 - * @li <b>10</b> - Forced GEN2 - * @li <b>11</b> - Reserved - */ - - unsigned int PortHotPlug:1; /**< Support hot plug? - * @par - * @li <b>0</b> - No support - * @li <b>1</b> - support - */ -/** PortMisc - Reserved */ - unsigned int PortMisc:27; -} SBGPPPORTCONFIG; - -/** CODECENTRY - Southbridge HD Audio OEM Codec structure */ -typedef struct _CODECENTRY { -/** Nid - Reserved ?? */ - unsigned char Nid; -/** Byte40 - Reserved ?? */ - unsigned int Byte40; -} CODECENTRY; - -/** CODECTBLLIST - Southbridge HD Audio Codec table list */ -typedef struct _CODECTBLLIST { -/** CodecID - Codec ID */ - unsigned int CodecID; -/** CodecTablePtr - Codec table pointer */ - CODECENTRY* CodecTablePtr; -} CODECTBLLIST; - -/** Sata Controller structure */ -typedef struct _SATAST { - unsigned char SataController:1; /**< SataController - * @par - * Sata Controller - * @li <b>0</b> - disable - * @li <b>1</b> - enable - */ - unsigned char SataIdeCombMdPriSecOpt:1; /**< SataIdeCombMdPriSecOpt - Reserved */ - unsigned char SataSetMaxGen2:1; /**< SataSetMaxGen2 - * @par - * Sata Controller Set to Max Gen2 mode - * @li <b>0</b> - disable - * @li <b>1</b> - enable - */ - unsigned char SataIdeCombinedMode:1; /**< SataIdeCombinedMode - * @par - * Sata IDE Controller set to Combined Mode - * @li <b>0</b> - enable - * @li <b>1</b> - disable - */ -/** SATARefClkSel - Reserved */ - unsigned char SATARefClkSel:2; // 4:5 -/** SATARefDivSel - Reserved */ - unsigned char SATARefDivSel:2; // 6:7 -} SATAST; - -/** _USBST Controller structure - * - * Usb Ohci1 Contoller is define at BIT0 - * - 0:disable 1:enable - * (Bus 0 Dev 18 Func0) * - * Usb Ehci1 Contoller is define at BIT1 - * - 0:disable 1:enable - * (Bus 0 Dev 18 Func2) * - * Usb Ohci2 Contoller is define at BIT2 - * - 0:disable 1:enable - * (Bus 0 Dev 19 Func0) * - * Usb Ehci2 Contoller is define at BIT3 - * - 0:disable 1:enable - * (Bus 0 Dev 19 Func2) * - * Usb Ohci3 Contoller is define at BIT4 - * - 0:disable 1:enable - * (Bus 0 Dev 22 Func0) * - * Usb Ehci3 Contoller is define at BIT5 - * - 0:disable 1:enable - * (Bus 0 Dev 22 Func2) * - * Usb Ohci4 Contoller is define at BIT6 - * - 0:disable 1:enable - * (Bus 0 Dev 20 Func5) * - */ -typedef struct _USBST { - unsigned char Ohci1:1; ///< Ohci0 controller - 0:disable, 1:enable - unsigned char Ehci1:1; ///< Ehci1 controller - 0:disable, 1:enable - unsigned char Ohci2:1; ///< Ohci2 controller - 0:disable, 1:enable - unsigned char Ehci2:1; ///< Ehci2 controller - 0:disable, 1:enable - unsigned char Ohci3:1; ///< Ohci3 controller - 0:disable, 1:enable - unsigned char Ehci3:1; ///< Ehci3 controller - 0:disable, 1:enable - unsigned char Ohci4:1; ///< Ohci4 controller - 0:disable, 1:enable - unsigned char UTemp:1; ///< Reserved -} USBST; - -/** - * _AZALIAPIN - HID Azalia or GPIO define structure. - * - */ -typedef struct _AZALIAPIN { - unsigned char AzaliaSdin0:2; /**< AzaliaSdin0 - * @par - * SDIN0 is define at BIT0 & BIT1 - * @li <b>00</b> - GPIO PIN - * @li <b>10</b> - As a Azalia SDIN pin - */ - unsigned char AzaliaSdin1:2; /**< AzaliaSdin1 - * @par - * SDIN0 is define at BIT2 & BIT3 - * @li <b>00</b> - GPIO PIN - * @li <b>10</b> - As a Azalia SDIN pin - */ - unsigned char AzaliaSdin2:2; /**< AzaliaSdin2 - * @par - * SDIN0 is define at BIT4 & BIT5 - * @li <b>00</b> - GPIO PIN - * @li <b>10</b> - As a Azalia SDIN pin - */ - unsigned char AzaliaSdin3:2; /**< AzaliaSdin3 - * @par - * SDIN0 is define at BIT6 & BIT7 - * @li <b>00</b> - GPIO PIN - * @li <b>10</b> - As a Azalia SDIN pin - */ -} AZALIAPIN; - -/** AMDSBCFG - Southbridge CIMx configuration structure (Main) */ -typedef struct _AMDSBCFG { -/** StdHeader - Standard header for all AGESA/CIMx services. */ - AMD_CONFIG_PARAMS StdHeader; - -/** BuildParameters - The STATIC platform information for CIMx Module. */ - BUILDPARAM BuildParameters; - //offset 90 bytes (32-121) - //MsgXchgBiosCimx //offset 4 bytes (122-125) - // SATA Configuration - - union /**< union - Reserved */ - { /**< SATAMODE - Sata Controller structure */ -/** SataModeReg - Reserved */ - unsigned char SataModeReg; -/** SataMode - Reserved */ - SATAST SataMode; - } SATAMODE; -/** S3Resume - Flag of ACPI S3 Resume. */ - unsigned char S3Resume:1; // 8 -/** RebootRequired - Flag of Reboot system is required. */ - unsigned char RebootRequired:1; // 9 -/** SbSpiSpeedSupport - Reserved */ - unsigned char SbSpiSpeedSupport:1; // 10 -/**< SpreadSpectrum - * @par - * Spread Spectrum function - * @li <b>0</b> - disable - * @li <b>1</b> - enable - */ - unsigned char SpreadSpectrum:1; // 11 -/** NbSbGen2 - Reserved */ - unsigned char NbSbGen2:1; // 12 - unsigned char GppGen2:1; // 13 - unsigned char GppMemWrImprove:1; // 14 -/** MsgXchgBiosCimxReserved - Reserved */ - unsigned char MsgXchgBiosCimxReserved:1; // 15 (BB USED) -/**< SataClass - SATA Controller mode [16:18] - * @par - * @li <b>000</b> - Native IDE mode - * @li <b>001</b> - RAID mode - * @li <b>010</b> - AHCI mode - * @li <b>011</b> - Legacy IDE mode - * @li <b>100</b> - IDE->AHCI mode - * @li <b>101</b> - AHCI mode as 4394 ID (AMD driver) - * @li <b>110</b> - IDE->AHCI mode as 4394 ID (AMD driver) - */ - unsigned short SataClass:3; // 16:18 -/**< Sata IDE Controller mode - * @par - * @li <b>0</b> - Legacy IDE mode - * @li <b>1</b> - Native IDE mode - */ - unsigned short SataIdeMode:1; // 19 -/**< SataEspPort - SATA port is external accessible on a signal only connector (eSATA:) - * @par - * @li <b> BIT0 </b> - PORT0 set as ESP port - * @li <b> BIT1 </b> - PORT1 set as ESP port - * @li <b> BIT2 </b> - PORT2 set as ESP port - * @li <b> BIT3 </b> - PORT3 set as ESP port - * @li <b> BIT4 </b> - PORT4 set as ESP port - * @li <b> BIT5 </b> - PORT5 set as ESP port - */ - unsigned short SataEspPort:6; // 20:25 -/** SataPortPower - Reserved */ - unsigned short SataPortPower:6; // 31:26 - - // SATA Debug Option //offset 4 bytes (126-129) - -/**< SataPortMode - Force Each PORT to GEN1/GEN2 mode - * @par - * @li <b> 0 </b> Auto for each PORTs - * @li <b> BIT0 = 1</b> - PORT0 set to GEN1 - * @li <b> BIT1 = 1</b> - PORT0 set to GEN2 - * @li <b> BIT2 = 1</b> - PORT1 set to GEN1 - * @li <b> BIT3 = 1</b> - PORT1 set to GEN2 - * @li <b> BIT4 = 1</b> - PORT2 set to GEN1 - * @li <b> BIT5 = 1</b> - PORT2 set to GEN2 - * @li <b> BIT6 = 1</b> - PORT3 set to GEN1 - * @li <b> BIT7 = 1</b> - PORT3 set to GEN2 - * @li <b> BIT8 = 1</b> - PORT4 set to GEN1 - * @li <b> BIT9 = 1</b> - PORT4 set to GEN2 - * @li <b> BIT10 = 1</b> - PORT5 set to GEN1 - * @li <b> BIT11 = 1</b> - PORT5 set to GEN2 - */ - unsigned int SataPortMode:12; //11:0 -/** SATAClkSelOpt - Reserved */ - unsigned int SATAClkSelOpt:4; // Removed from coding side -/** SataAggrLinkPmCap - Reserved */ - unsigned int SataAggrLinkPmCap:1; //16, 0:OFF 1:ON -/** SataPortMultCap - Reserved */ - unsigned int SataPortMultCap:1; //17, 0:OFF 1:ON -/** SataClkAutoOff - Reserved */ - unsigned int SataClkAutoOff:1; //18, AutoClockOff 0:Disabled, 1:Enabled -/** SataPscCap - Reserved */ - unsigned int SataPscCap:1; //19, 0:Enable PSC capability, 1:Disable PSC capability -/** BIOSOSHandoff - Reserved */ - unsigned int BIOSOSHandoff:1; //20 -/** SataFisBasedSwitching - Reserved */ - unsigned int SataFisBasedSwitching:1; //21 -/** SataCccSupport - Reserved */ - unsigned int SataCccSupport:1; //22 -/** SataSscCap - Reserved */ - unsigned int SataSscCap:1; //23, 0:Enable SSC capability, 1:Disable SSC capability -/** SataMsiCapability - Reserved */ - unsigned int SataMsiCapability:1; //24 0:Hidden 1:Visible. This feature is disabled per RPR, but remains the interface. -/** SataForceRaid - Reserved */ - unsigned int SataForceRaid:1; //25 0:No function 1:Force RAID -/** SataDebugDummy - Reserved */ - unsigned int SataDebugDummy:6; //31:26 -// -// USB Configuration //offset 4 bytes (130-133) -// - -/** USBDeviceConfig - USB Controller Configuration - * - * - Usb Ohci1 Contoller is define at BIT0 - * - 0:disable 1:enable - * (Bus 0 Dev 18 Func0) * - * - Usb Ehci1 Contoller is define at BIT1 - * - 0:disable 1:enable - * (Bus 0 Dev 18 Func2) * - * - Usb Ohci2 Contoller is define at BIT2 - * - 0:disable 1:enable - * (Bus 0 Dev 19 Func0) * - * - Usb Ehci2 Contoller is define at BIT3 - * - 0:disable 1:enable - * (Bus 0 Dev 19 Func2) * - * - Usb Ohci3 Contoller is define at BIT4 - * - 0:disable 1:enable - * (Bus 0 Dev 22 Func0) * - * - Usb Ehci3 Contoller is define at BIT5 - * - 0:disable 1:enable - * (Bus 0 Dev 22 Func2) * - * - Usb Ohci4 Contoller is define at BIT6 - * - 0:disable 1:enable - * (Bus 0 Dev 20 Func5) * - */ - union /**< union - Reserved */ - { /**< USBMODE - USB Controller structure */ -/** SataModeReg - Reserved */ - unsigned char UsbModeReg; -/** SataMode - Reserved */ - USBST UsbMode; - } USBMODE; -/*! - */ - -/**< GecConfig - * @par - * InChip Gbit NIC - * @li <b>1</b> - disable - * @li <b>0</b> - enable - */ - unsigned char GecConfig:1; //8 - -/**< IrConfig - * @par - * Ir Controller setting - * @li <b>00 </b> - disable - * @li <b>01 </b> - Rx and Tx0 - * @li <b>10 </b> - Rx and Tx1 - * @li <b>11 </b> - Rx and both Tx0,Tx1 - */ - unsigned char IrConfig:2; //9:10 - -/** GecDummy - Reserved */ - unsigned char GecDummy:5; //15:11 - - //Azalia Configuration - -/**< AzaliaController - Azalia Controller Configuration - * @par - * Azalia Controller [0-1] - * @li <b>0</b> - Auto : Detect Azalia controller automatically. - * @li <b>1</b> - Diable : Disable Azalia controller. - * @li <b>2</b> - Enable : Enable Azalia controller. - */ - unsigned char AzaliaController:2; //17:16 -/**< AzaliaPinCfg - Azalia Controller SDIN pin Configuration - * @par - * @li <b>0</b> - disable - * @li <b>1</b> - enable - */ - unsigned char AzaliaPinCfg:1; //18 -/**< AzaliaFrontPanel - Azalia Controller Front Panel Configuration - * @par - * Support Front Panel configuration - * @li <b>0</b> - Auto - * @li <b>1</b> - disable - * @li <b>2</b> - enable - */ - unsigned char AzaliaFrontPanel:2; //20:19 -/**< FrontPanelDetected - Force Azalia Controller Front Panel Configuration - * @par - * Force Front Panel configuration - * @li <b>0</b> - Not Detected - * @li <b>1</b> - Detected - */ - unsigned char FrontPanelDetected:1; //21 -/**< AzaliaSnoop - Azalia Controller Snoop feature Configuration - * @par - * Azalia Controller Snoop feature Configuration - * @li <b>0</b> - disable - * @li <b>1</b> - enable - */ - unsigned char AzaliaSnoop:1; //22 -/** AzaliaDummy - Reserved */ - unsigned char AzaliaDummy:1; //23 - - union - { -/**< AzaliaSdinPin - Azalia Controller SDIN pin Configuration - * - * SDIN0 is define at BIT0 & BIT1 - * - 00: GPIO PIN - * - 01: Reserved - * - 10: As a Azalia SDIN pin - * - * SDIN1 is define at BIT2 & BIT3 - * * Config same as SDIN0 - * SDIN2 is define at BIT4 & BIT5 - * * Config same as SDIN0 - * SDIN3 is define at BIT6 & BIT7 - * * Config same as SDIN0 - */ - unsigned char AzaliaSdinPin; - AZALIAPIN AzaliaConfig; - } AZALIACONFIG; - -/** AZOEMTBL - Azalia Controller OEM Codec Table Pointer - * - */ - union - { - PLACEHOLDER PlaceHolder; - CODECTBLLIST* pAzaliaOemCodecTablePtr; //offset 4 bytes (134-137) - } AZOEMTBL; - -/** AZOEMFPTBL - Azalia Controller Front Panel OEM Table Pointer - * - */ - union - { - PLACEHOLDER PlaceHolder; - void* pAzaliaOemFpCodecTablePtr; //offset 4 bytes (138-141) - } AZOEMFPTBL; - - //Miscellaneous Configuration //offset 4 bytes (142-145) -/** AnyHT200MhzLink - Reserved */ - unsigned int AnyHT200MhzLink:1; //0 -/**< HpetTimer - South Bridge Hpet Timer Configuration - * @par - * @li <b>0</b> - disable - * @li <b>1</b> - enable - */ - unsigned int HpetTimer:1; //1 -/**< PciClks - PCI Slot Clock Control - * @par - * PCI SLOT 0 define at BIT0 - * - 00: disable - * - 01: enable - * - * PCI SLOT 1 define at BIT1 - * * Config same as PCI SLOT0 - * PCI SLOT 2 define at BIT2 - * * Config same as PCI SLOT0 - * PCI SLOT 3 define at BIT3 - * * Config same as PCI SLOT0 - * PCI SLOT 4 define at BIT4 - * * Config same as PCI SLOT0 - */ - unsigned int PciClks:5; //2:6 -/** MiscReserved1 - Reserved */ - unsigned int MiscReserved1:4; //9:7, Reserved -/** MobilePowerSavings - Debug function Reserved */ - unsigned int MobilePowerSavings:1; //11, 0:Disable, 1:Enable Power saving features especially for Mobile platform -/** MiscDummy1 - Debug function Reserved */ - unsigned int MiscDummy1:1; -/** NativePcieSupport - Debug function Reserved */ - unsigned int NativePcieSupport:1; //13, 0:Enable, 1:Disabled -/** FlashPinConfig - Debug function Reserved */ - unsigned int FlashPinConfig:1; //14, 0:desktop mode 1:mobile mode -/** UsbPhyPowerDown - Debug function Reserved */ - unsigned int UsbPhyPowerDown:1; //15 -/** PcibClkStopOverride - Debug function Reserved */ - unsigned int PcibClkStopOverride:10; //25:16 -/**< HpetMsiDis - South Bridge HPET MSI Configuration - * @par - * @li <b>1</b> - disable - * @li <b>0</b> - enable - */ - unsigned int HpetMsiDis:1; //26 -/**< ResetCpuOnSyncFlood - Rest CPU on Sync Flood - * @par - * @li <b>0</b> - disable - * @li <b>1</b> - enable - */ - unsigned int ResetCpuOnSyncFlood:1; //27 -/**< LdtStpDisable - LdtStp# output disable - * @par - * @li <b>0</b> - LdtStp# output enable - * @li <b>1</b> - LdtStp# output disable - */ - unsigned int LdtStpDisable:1; //28 -/**< MTC1e - Message Triggered C1e - * @par - * @li <b>0</b> - disable - * @li <b>1</b> - enable - */ - unsigned int MTC1e:1; //29 -/** MiscDummy - Reserved */ - unsigned int MiscDummy:2; //31:30 - unsigned int SioHwmPortEnable:1; // Enable SuperIO HWM access via LPC - - //DebugOptions //offset 4 bytes (146-149) -/** PcibAutoClkCtrlLow - Debug function Reserved */ - unsigned int PcibAutoClkCtrlLow:16; -/** PcibAutoClkCtrlHigh - Debug function Reserved */ - unsigned int PcibAutoClkCtrlHigh:16; - -/**< OEMPROGTBL - ACPI MMIO register setting table OEM override - * @par - * OEM table for customer override ACPI MMIO register in their code. - */ - union - { - PLACEHOLDER OemProgrammingTablePtr; //offset 4 bytes (150-153) - void *OemProgrammingTablePtr_Ptr; - } OEMPROGTBL; - - //Gpp Configuration //offset 24 bytes total (154-177) - union { - unsigned int PORTCFG32; - SBGPPPORTCONFIG PortCfg; - } PORTCONFIG[MAX_GPP_PORTS]; //offset 16 bytes - - unsigned int GppLinkConfig; // GPP_LINK_CONFIG = PCIE_GPP_Enable[3:0] - // 0000 - Port ABCD -> 4:0:0:0 - // 0001 - N/A - // 0010 - Port ABCD -> 2:2:0:0 - // 0011 - Port ABCD -> 2:1:1:0 - // 0100 - Port ABCD -> 1:1:1:1 - // - unsigned int GppFoundGfxDev:4; //3:0 If port A-D (mapped to bit [3:0]) has GFX EP detected - unsigned int CoreGen2Enable:1; //4 - unsigned int GppFunctionEnable:1; //5 - unsigned int GppUnhidePorts:1; //6 - unsigned int AlinkPhyPllPowerDown:1; //7 - unsigned int GppConfigDummy1:2; //9:8 - unsigned int GppLaneReversal:1; //10 - unsigned int GppPhyPllPowerDown:1; //11 - unsigned int GppCompliance :1; //12 - unsigned int GppPortAspm:8; //20:13 ASPM state for GPP ports, 14:13 for port0, ..., 20:19 for port3 - // 00 - Disabled - // 01 - L0s - // 10 - L1 - // 11 - L0s + L1 - // - unsigned int GppConfigDummy:11; //31:21 - - //TempMMIO //offset 4 bytes (178-181) - unsigned int TempMMIO; - - // DebugOption2 - unsigned int GecPhyStatus:1; - unsigned int GecDebugOptionDummy:7; - unsigned int SBGecPwr:2; - unsigned int SBGecDebugBus:1; - unsigned int DebugOption2Dummy1:1; - unsigned int DebugOption2Dummy2:1; - unsigned int SbPcieOrderRule:1; - unsigned int SbUsbPll:1; - unsigned int AcDcMsg:1; - unsigned int TimerTickTrack:1; - unsigned int ClockInterruptTag:1; - unsigned int OhciTrafficHanding:1; - unsigned int EhciTrafficHanding:1; - unsigned int FusionMsgCMultiCore:1; - unsigned int FusionMsgCStage:1; -/**< UsbRxMode - CG PLL multiplier for USB Rx 1.1 mode - * @par - * @li <b>0</b> - disable - * @li <b>1</b> - enable - */ - unsigned int UsbRxMode:1; - unsigned int DebugOption2Dummy3:9; // - - union - { - PLACEHOLDER DynamicGecRomAddressPtr; //offset 4 bytes (182-185) - void *DynamicGecRomAddress_Ptr; - } DYNAMICGECROM; - EC_struct Pecstruct; -} AMDSBCFG; - -/** SMMSERVICESTRUC- Southbridge SMI service structure */ -typedef struct _SMMSERVICESTRUC { -/** enableRegNum - Reserved */ - unsigned char enableRegNum; -/** enableBit - Reserved */ - unsigned char enableBit; -/** statusRegNum - Reserved */ - unsigned char statusRegNum; -/** statusBit - Reserved */ - unsigned char statusBit; -/** *debugMessage- Reserved */ - signed char *debugMessage; -/** serviceRoutine - Reserved */ - SMM_SERVICE_ROUTINE serviceRoutine; -} SMMSERVICESTRUC; - -#ifndef _NB_REG8MASK_ - -/** - * - Byte Register R/W structure - * - */ - typedef struct _Reg8Mask { -/** bRegIndex - Reserved */ - unsigned char bRegIndex; -/** bANDMask - Reserved */ - unsigned char bANDMask; -/** bORMask - Reserved */ - unsigned char bORMask; - } REG8MASK; -#endif - -/** - * - SATA Phy setting structure - * - */ -typedef struct _SATAPHYSETTING { -/** wPhyCoreControl - Reserved */ - unsigned short wPhyCoreControl; -/** dwPhyFineTune - Reserved */ - unsigned int dwPhyFineTune; -} SATAPHYSETTING; - -/** - * _ABTblEntry - AB link register table R/W structure - * - */ -typedef struct _ABTblEntry { - /** regType : AB Register Type (ABCFG, AXCFG and so on) */ - unsigned char regType; - /** regIndex : AB Register Index */ - unsigned int regIndex; - /** regMask : AB Register Mask */ - unsigned int regMask; - /** regData : AB Register Data */ - unsigned int regData; -} ABTBLENTRY; - -/** - * _AcpiRegWrite - ACPI MMIO register R/W structure - * - */ -typedef struct _AcpiRegWrite { - /** MmioBase : Index of Soubridge block (For instence GPIO_BASE:0x01 SMI_BASE:0x02) */ - unsigned char MmioBase; - /** MmioReg : Register index */ - unsigned char MmioReg; - /** DataANDMask : AND Register Data */ - unsigned char DataANDMask; - /** DataOrMask : Or Register Data */ - unsigned char DataOrMask; -} AcpiRegWrite; - -/** - * PCI_ADDRESS - PCI access structure - * - */ -#define PCI_ADDRESS(bus, dev, func, reg) \ -(unsigned int) ( (((unsigned int)bus) << 24) + (((unsigned int)dev) << 19) + (((unsigned int)func) << 16) + ((unsigned int)reg) ) - -/** - * CIM_STATUS - CIMx module function return code - */ -typedef unsigned int CIM_STATUS; -/** - * CIM_SUCCESS - Executed without error - */ -#define CIM_SUCCESS 0x00000000 -/** - * CIM_ERROR - call error - */ -#define CIM_ERROR 0x80000000 -/** - * CIM_UNSUPPORTED - function does not support - */ -#define CIM_UNSUPPORTED 0x80000001 - -#pragma pack (pop) - -/** - * CIMX_OPTION_DISABLED - Define disable in module - */ -#define CIMX_OPTION_DISABLED 0 -/** - * CIMX_OPTION_ENABLED - Define enable in module - */ -#define CIMX_OPTION_ENABLED 1 - -/** - * SATA_IDE_COMBINE_ENABLE -Define Enable Combined Mode - */ -#define SATA_IDE_COMBINE_ENABLE 0 - -/** - * SATA_IDE_COMBINE_DISABLE -Define Disable Combined Mode - */ -#define SATA_IDE_COMBINE_DISABLE 1 - -// mov al, code -// out 80h, al -// jmp $ - -/** - * DBG_STOP - define a debug point - */ -#define DBG_STOP __asm _emit 0xEB __asm _emit 0xFE - -/** - * STOP_CODE - define a debug point - * Warning: AL gets destroyed! - */ -#define STOP_CODE (code) __asm __emit 0xB0 __asm __emit code __asm __emit 0xE6 \ - __asm __emit 0x80 __asm _emit 0xEB __asm _emit 0xFE - -#endif // _AMD_SBTYPE_H_ diff --git a/src/vendorcode/amd/cimx/sb800/SMM.c b/src/vendorcode/amd/cimx/sb800/SMM.c deleted file mode 100644 index 894ec2a..0000000 --- a/src/vendorcode/amd/cimx/sb800/SMM.c +++ /dev/null @@ -1,86 +0,0 @@ -/** - * @file - * - * Southbridge SMM service function - * - * Prepare SMM service module for IBV call Southbridge SMI service routine. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: CIMx-SB - * @e sub-project: - * @e $Revision:$ @e $Date:$ - * - */ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#include "SBPLATFORM.h" -#include "cbtypes.h" - -// -// Declaration of local functions -// - -/** - * Southbridge SMI service module - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -sbSmmService ( - IN AMDSBCFG* pConfig - ) -{ - AMDSBCFG* pTmp; //lx-dummy for /W4 build - pTmp = pConfig; -} - -/** - * softwareSMIservice - Software SMI service - * - * @param[in] VOID Southbridge software SMI service ID. - * - */ -VOID -softwareSMIservice ( - IN VOID - ) -{ -} - - - - - diff --git a/src/vendorcode/amd/cimx/sb800/Sata.c b/src/vendorcode/amd/cimx/sb800/Sata.c new file mode 100644 index 0000000..c2f2162 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/Sata.c @@ -0,0 +1,675 @@ + +/** + * @file + * + * Config Southbridge SATA controller + * + * Init SATA features. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: CIMx-SB + * @e sub-project: + * @e $Revision:$ @e $Date:$ + * + */ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#include "SBPLATFORM.h" +#include "cbtypes.h" + +// +// Declaration of local functions +// +VOID sataSetIrqIntResource (IN AMDSBCFG* pConfig); +VOID sataBar5setting (IN AMDSBCFG* pConfig, IN UINT32 *pBar5); +VOID shutdownUnconnectedSataPortClock (IN AMDSBCFG* pConfig, IN UINT32 ddBar5); +VOID sataDriveDetection (IN AMDSBCFG* pConfig, IN UINT32 *pBar5); + +/** + * sataSetIrqIntResource - Config SATA IRQ/INT# resource + * + * + * - Private function + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +sataSetIrqIntResource ( + IN AMDSBCFG* pConfig + ) +{ + UINT8 dbValue; + // IRQ14/IRQ15 come from IDE or SATA + dbValue = 0x08; + WriteIO (SB_IOMAP_REGC00, AccWidthUint8, &dbValue); + ReadIO (SB_IOMAP_REGC01, AccWidthUint8, &dbValue); + dbValue = dbValue & 0x0F; + if (pConfig->SataClass == 3) { + dbValue = dbValue | 0x50; + } else { + if (pConfig->SataIdeMode == 1) { + // Both IDE & SATA set to Native mode + dbValue = dbValue | 0xF0; + } + } + WriteIO (SB_IOMAP_REGC01, AccWidthUint8, &dbValue); +} + +/** + * sataBar5setting - Config SATA BAR5 + * + * - Private function + * + * @param[in] pConfig - Southbridge configuration structure pointer. + * @param[in] *pBar5 - SATA BAR5 buffer. + * + */ +VOID +sataBar5setting ( + IN AMDSBCFG* pConfig, + IN UINT32 *pBar5 + ) +{ + //Get BAR5 value + ReadPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG24), AccWidthUint32, pBar5); + //Assign temporary BAR if is not already assigned + if ( (*pBar5 == 0) || (*pBar5 == - 1) ) { + //assign temporary BAR5 + if ( (pConfig->TempMMIO == 0) || (pConfig->TempMMIO == - 1) ) { + *pBar5 = 0xFEC01000; + } else { + *pBar5 = pConfig->TempMMIO; + } + WritePCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG24), AccWidthUint32, pBar5); + } + //Clear Bits 9:0 + *pBar5 = *pBar5 & 0xFFFFFC00; +} +/** + * shutdownUnconnectedSataPortClock - Shutdown unconnected Sata port clock + * + * - Private function + * + * @param[in] pConfig Southbridge configuration structure pointer. + * @param[in] ddBar5 Sata BAR5 base address. + * + */ +VOID +shutdownUnconnectedSataPortClock ( + IN AMDSBCFG* pConfig, + IN UINT32 ddBar5 + ) +{ + UINT8 dbPortNum; + UINT8 dbPortSataStatus; + UINT8 NumOfPorts; + UINT8 cimSataClkAutoOff; + + cimSataClkAutoOff = (UINT8) pConfig->SataClkAutoOff; +#if SB_CIMx_PARAMETER == 0 + cimSataClkAutoOff = cimSataClkAutoOffDefault; +#endif + NumOfPorts = 0; + if ( cimSataClkAutoOff == TRUE ) { + for ( dbPortNum = 0; dbPortNum < 6; dbPortNum++ ) { + ReadMEM (ddBar5 + SB_SATA_BAR5_REG128 + (dbPortNum * 0x80), AccWidthUint8, &dbPortSataStatus); + // Shutdown the clock for the port and do the necessary port reporting changes. + // ?? Error port status should be 1 not 3 + if ( ((dbPortSataStatus & 0x0F) != 0x03) && (! ((pConfig->SataEspPort) & (1 << dbPortNum))) ) { + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8, 0xFF, (1 << dbPortNum)); + RWMEM (ddBar5 + SB_SATA_BAR5_REG0C, AccWidthUint8, ~(1 << dbPortNum), 00); + } + } //end of for (dbPortNum=0;dbPortNum<6;dbPortNum++) + ReadMEM (ddBar5 + SB_SATA_BAR5_REG0C, AccWidthUint8, &dbPortSataStatus); + //if all ports are in disabled state, report atleast one port + if ( (dbPortSataStatus & 0x3F) == 0) { + RWMEM (ddBar5 + SB_SATA_BAR5_REG0C, AccWidthUint8, (UINT32) ~(0x3F), 01); + } + ReadMEM (ddBar5 + SB_SATA_BAR5_REG0C, AccWidthUint8, &dbPortSataStatus); + for (dbPortNum = 0; dbPortNum < 6; dbPortNum ++) { + if (dbPortSataStatus & (1 << dbPortNum)) { + NumOfPorts++; + } + } + if ( NumOfPorts == 0) { + NumOfPorts = 0x01; + } + RWMEM (ddBar5 + SB_SATA_BAR5_REG00, AccWidthUint8, 0xE0, NumOfPorts - 1); + } //end of SataClkAuto Off option +} + +/** + * Table for class code of SATA Controller in different modes + * + * + * + * + */ +const static UINT32 sataIfCodeTable[] = +{ + 0x01018F40, //sata class ID of IDE + 0x01040040, //sata class ID of RAID + 0x01060140, //sata class ID of AHCI + 0x01018A40, //sata class ID of Legacy IDE + 0x01018F40, //sata class ID of IDE to AHCI mode +}; + +/** + * Table for device id of SATA Controller in different modes + * + * + * + * + */ +const static UINT16 sataDeviceIDTable[] = +{ + 0x4390, //sata device ID of IDE + 0x4392, //sata device ID of RAID + 0x4391, //sata class ID of AHCI + 0x4390, //sata device ID of Legacy IDE + 0x4390, //sata device ID of IDE->AHCI mode +}; + +/** + * Table for Sata Phy Fine Setting + * + * + * + * + */ +const static SATAPHYSETTING sataPhyTable[] = +{ + {0x3006, 0x0056A607}, + {0x2006, 0x00061400}, + {0x1006, 0x00061302}, + + {0x3206, 0x0056A607}, + {0x2206, 0x00061400}, + {0x1206, 0x00061302}, + + {0x3406, 0x0056A607}, + {0x2406, 0x00061402}, + {0x1406, 0x00064300}, + + {0x3606, 0x0056A607}, + {0x2606, 0x00061402}, + {0x1606, 0x00064300}, + + {0x3806, 0x0056A700}, + {0x2806, 0x00061502}, + {0x1806, 0x00064302}, + + {0x3A06, 0x0056A700}, + {0x2A06, 0x00061502}, + {0x1A06, 0x00064302} +}; + +/** + * sataInitBeforePciEnum - Config SATA controller before PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +sataInitBeforePciEnum ( + IN AMDSBCFG* pConfig + ) +{ + UINT32 ddTempVar; + UINT32 ddValue; + UINT32 *tempptr; + UINT16 *pDeviceIdptr; + UINT32 dwDeviceId; + UINT8 dbValue; + UINT8 pValue; + UINT16 i; + SATAPHYSETTING *pPhyTable; + + ddTempVar = 0; + // BIT0 Enable write access to PCI header (reg 08h-0Bh) by setting SATA PCI register 40h + // BIT4: Disable fast boot + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, 0xff, BIT0 + BIT2 + BIT4); + // BIT0 Enable write access to PCI header (reg 08h-0Bh) by setting IDE PCI register 40h + RWPCI (((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG40), AccWidthUint8 | S3_SAVE, 0xff, BIT0); + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8 | S3_SAVE, 0, pConfig->SataPortPower); + dbValue = (UINT8)pConfig->SataClass; + if (dbValue == AHCI_MODE_4394) { + dbValue = AHCI_MODE; + } + if (dbValue == IDE_TO_AHCI_MODE_4394) { + dbValue = IDE_TO_AHCI_MODE; + } + // Disable PATA MSI + RWPCI (((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG34), AccWidthUint8 | S3_SAVE, 0x00, 0x00); + RWPCI (((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG06), AccWidthUint8 | S3_SAVE, 0xEF, 0x00); + + // Get the appropriate class code from the table and write it to PCI register 08h-0Bh + // Set the appropriate SATA class based on the input parameters + // SATA IDE Controller Class ID & SSID + tempptr = (UINT32 *) FIXUP_PTR (&sataIfCodeTable[0]); + if ( (pConfig->SataIdeMode == 1) && (pConfig->SataClass != 3) ) { + ddValue = tempptr[0]; + // Write the class code to IDE PCI register 08h-0Bh + RWPCI (((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG08), AccWidthUint32 | S3_SAVE, 0, ddValue); + } + ddValue = tempptr[dbValue]; + // Write the class code to SATA PCI register 08h-0Bh + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG08), AccWidthUint32 | S3_SAVE, 0, ddValue); + if ( pConfig->SataClass == LEGACY_IDE_MODE ) { + //Set PATA controller to native mode + RWPCI (((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG09), AccWidthUint8 | S3_SAVE, 0x00, 0x08F); + } + if (pConfig->BuildParameters.IdeSsid != 0 ) { + RWPCI ((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pConfig->BuildParameters.IdeSsid); + } + // SATA Controller Class ID & SSID + pDeviceIdptr = (UINT16 *) FIXUP_PTR (&sataDeviceIDTable[0]); + if ( pConfig->BuildParameters.SataIDESsid != 0 ) { + ddTempVar = pConfig->BuildParameters.SataIDESsid; + } + dwDeviceId = pDeviceIdptr[dbValue]; + if ( pConfig->SataClass == RAID_MODE) { + if ( pConfig->BuildParameters.SataRAID5Ssid != 0 ) { + ddTempVar = pConfig->BuildParameters.SataRAID5Ssid; + } + dwDeviceId = V_SB_SATA_RAID5_DID; + pValue = SATA_EFUSE_LOCATION; + getEfuseStatus (&pValue); + if (( pValue & SATA_EFUSE_BIT ) || ( pConfig->SataForceRaid == 1 )) { + dwDeviceId = V_SB_SATA_RAID_DID; + if ( pConfig->BuildParameters.SataRAIDSsid != 0 ) { + ddTempVar = pConfig->BuildParameters.SataRAIDSsid; + } + } + } + if ( ((pConfig->SataClass) == AHCI_MODE) || ((pConfig->SataClass) == IDE_TO_AHCI_MODE) || + ((pConfig->SataClass) == AHCI_MODE_4394) || ((pConfig->SataClass) == IDE_TO_AHCI_MODE_4394) ) { + if ( pConfig->BuildParameters.SataAHCISsid != 0 ) { + ddTempVar = pConfig->BuildParameters.SataAHCISsid; + } + } + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, 0, dwDeviceId); + if ( ddTempVar != 0 ) { + RWPCI ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG2C, AccWidthUint32 | S3_SAVE, 0x00, ddTempVar); + } + // SATA IRQ Resource + sataSetIrqIntResource (pConfig); + + // 8.4 SATA PHY Programming Sequence + pPhyTable = (SATAPHYSETTING*)FIXUP_PTR (&sataPhyTable[0]); + for (i = 0; i < (sizeof (sataPhyTable) / sizeof (SATAPHYSETTING)); i++) { + RWPCI ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG84, AccWidthUint16 | S3_SAVE, ~(BIT1 + BIT2 + BIT9 + BIT10 + BIT11 + BIT12 + BIT13 + BIT14), pPhyTable->wPhyCoreControl); + RWPCI ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG94, AccWidthUint32 | S3_SAVE, 0x00, pPhyTable->dwPhyFineTune); + ++pPhyTable; + } + +// CallBackToOEM (SATA_PHY_PROGRAMMING, NULL, pConfig); + + RWPCI (((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG40), AccWidthUint8 | S3_SAVE, ~BIT0, 0); + // Disable write access to PCI header + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, ~BIT0, 0); +} + +/** + * sataInitAfterPciEnum - Config SATA controller after PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +sataInitAfterPciEnum ( + IN AMDSBCFG* pConfig + ) +{ + UINT32 ddAndMask; + UINT32 ddOrMask; + UINT32 ddBar5; + UINT8 dbVar; + UINT8 dbPortNum; + UINT8 dbEfuse; + UINT8 dbPortMode; + UINT16 SataPortMode; + UINT8 cimSataAggrLinkPmCap; + UINT8 cimSataPortMultCap; + UINT8 cimSataPscCap; + UINT8 cimSataSscCap; + UINT8 cimSataFisBasedSwitching; + UINT8 cimSataCccSupport; + + cimSataAggrLinkPmCap = (UINT8) pConfig->SataAggrLinkPmCap; + cimSataPortMultCap = (UINT8) pConfig->SataPortMultCap; + cimSataPscCap = (UINT8) pConfig->SataPscCap; + cimSataSscCap = (UINT8) pConfig->SataSscCap; + cimSataFisBasedSwitching = (UINT8) pConfig->SataFisBasedSwitching; + cimSataCccSupport = (UINT8) pConfig->SataCccSupport; + +#if SB_CIMx_PARAMETER == 0 + cimSataAggrLinkPmCap = cimSataAggrLinkPmCapDefault; + cimSataPortMultCap = cimSataPortMultCapDefault; + cimSataPscCap = cimSataPscCapDefault; + cimSataSscCap = cimSataSscCapDefault; + cimSataFisBasedSwitching = cimSataFisBasedSwitchingDefault; + cimSataCccSupport = cimSataCccSupportDefault; +#endif + + ddAndMask = 0; + ddOrMask = 0; + ddBar5 = 0; + if ( pConfig->SATAMODE.SataMode.SataController == 0 ) { + return; //return if SATA controller is disabled. + } + + //Enable write access to pci header, pm capabilities + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, 0xFF, BIT0); + //Disable AHCI Prefetch function + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8 | S3_SAVE, 0x7F, BIT7); + + sataBar5setting (pConfig, &ddBar5); + + ReadPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar); + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8,0xFF, 0x03); //memory and io access enable + dbEfuse = SATA_FIS_BASE_EFUSE_LOC; + getEfuseStatus (&dbEfuse); + + if ( !cimSataPortMultCap ) { + ddAndMask |= BIT12; + } + if ( cimSataAggrLinkPmCap ) { + ddOrMask |= BIT11; + } else { + ddAndMask |= BIT11; + } + if ( cimSataPscCap ) { + ddOrMask |= BIT1; + } + if ( cimSataSscCap ) { + ddOrMask |= BIT26; + } + if ( cimSataFisBasedSwitching ) { + if (dbEfuse & BIT1) { + ddAndMask |= BIT10; + } else { + ddOrMask |= BIT10; + } + } else { + ddAndMask |= BIT10; + } + // RPR 8.10 Disabling CCC (Command Completion Coalescing) support. + if ( cimSataCccSupport ) { + ddOrMask |= BIT19; + } else { + ddAndMask |= BIT19; + } + RWMEM ((ddBar5 + SB_SATA_BAR5_REGFC), AccWidthUint32 | S3_SAVE, ~ddAndMask, ddOrMask); + + + // SATA ESP port setting + // These config bits are set for SATA driver to identify which ports are external SATA ports and need to + // support hotplug. If a port is set as an external SATA port and need to support hotplug, then driver will + // not enable power management (HIPM & DIPM) for these ports. + if ( pConfig->SataEspPort != 0 ) { + RWMEM ((ddBar5 + SB_SATA_BAR5_REGF8), AccWidthUint32 | S3_SAVE, ~(pConfig->SataEspPort), 0); + RWMEM ((ddBar5 + SB_SATA_BAR5_REGF8), AccWidthUint32 | S3_SAVE, ~(BIT12 + BIT13 + BIT14 + BIT15 + BIT16 + BIT17 + BIT5 + BIT4 + BIT3 + BIT2 + BIT1 + BIT0), (pConfig->SataEspPort << 12)); + // RPR 8.7 External SATA Port Indication Registers + // If any of the ports was programmed as an external port, HCAP.SXS should also be set + RWMEM ((ddBar5 + SB_SATA_BAR5_REGFC), AccWidthUint32 | S3_SAVE, ~(BIT20), BIT20); + } else { + // RPR 8.7 External SATA Port Indication Registers + // If any of the ports was programmed as an external port, HCAP.SXS should also be set (Clear for no ESP port) + RWMEM ((ddBar5 + SB_SATA_BAR5_REGF8), AccWidthUint32 | S3_SAVE, ~(BIT5 + BIT4 + BIT3 + BIT2 + BIT1 + BIT0), 0x00); + RWMEM ((ddBar5 + SB_SATA_BAR5_REGFC), AccWidthUint32 | S3_SAVE, ~(BIT20), 0x00); + } + if ( cimSataFisBasedSwitching ) { + if (dbEfuse & BIT1) { + RWMEM ((ddBar5 + SB_SATA_BAR5_REGF8), AccWidthUint32 | S3_SAVE, ~(BIT22 + BIT23 + BIT24 + BIT25 + BIT26 + BIT27), 0x00); + } else { + RWMEM ((ddBar5 + SB_SATA_BAR5_REGF8), AccWidthUint32 | S3_SAVE, ~(BIT22 + BIT23 + BIT24 + BIT25 + BIT26 + BIT27), (BIT22 + BIT23 + BIT24 + BIT25 + BIT26 + BIT27)); + } + } else { + RWMEM ((ddBar5 + SB_SATA_BAR5_REGF8), AccWidthUint32 | S3_SAVE, ~(BIT22 + BIT23 + BIT24 + BIT25 + BIT26 + BIT27), 0x00); + } + + // Disabled SATA MSI and D3 Power State capability + // RPR 8.13 SATA MSI and D3 Power State Capability + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG34), AccWidthUint8 | S3_SAVE, 0, 0x70); + + if (((pConfig->SataClass) != NATIVE_IDE_MODE) && ((pConfig->SataClass) != LEGACY_IDE_MODE)) { + // RAID or AHCI + if ((pConfig->SATAMODE.SataMode.SataIdeCombinedMode) == SATA_IDE_COMBINE_DISABLE) { + RWMEM ((ddBar5 + SB_SATA_BAR5_REG00), AccWidthUint8 | S3_SAVE, ~(BIT2 + BIT1 + BIT0), BIT2 + BIT0); + RWMEM ((ddBar5 + SB_SATA_BAR5_REG0C), AccWidthUint8 | S3_SAVE, 0xC0, 0x3F); + // RPR 8.10 Disabling CCC (Command Completion Coalescing) support. + // 8 messages + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG50 + 2), AccWidthUint8, ~(BIT3 + BIT2 + BIT1), BIT2 + BIT1); + } else { + // RPR 8.10 Disabling CCC (Command Completion Coalescing) support. + if ( pConfig->SataCccSupport ) { + // 8 messages + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG50 + 2), AccWidthUint8, ~(BIT3 + BIT2 + BIT1), BIT2 + BIT1); + } else { + // 4 messages + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG50 + 2), AccWidthUint8, ~(BIT3 + BIT2 + BIT1), BIT2); + } + } + } + + if ( pConfig->BIOSOSHandoff == 1 ) { + RWMEM ((ddBar5 + SB_SATA_BAR5_REG24), AccWidthUint8 | S3_SAVE, ~BIT0, BIT0); + } else { + RWMEM ((ddBar5 + SB_SATA_BAR5_REG24), AccWidthUint8 | S3_SAVE, ~BIT0, 0x00); + } + + SataPortMode = (UINT16)pConfig->SataPortMode; + dbPortNum = 0; + while ( dbPortNum < 6 ) { + dbPortMode = (UINT8) (SataPortMode & 3); + if ( (dbPortMode == BIT0) || (dbPortMode == BIT1) ) { + if ( dbPortMode == BIT0 ) { + // set GEN 1 + RWMEM (ddBar5 + SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0x0F, 0x10); + } + if ( dbPortMode == BIT1 ) { + // set GEN2 (default is GEN3) + RWMEM (ddBar5 + SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0x0F, 0x20); + } + RWMEM (ddBar5 + SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0xFF, 0x01); + } + SataPortMode >>= 2; + dbPortNum ++; + } + SbStall (1000); + SataPortMode = (UINT16)pConfig->SataPortMode; + dbPortNum = 0; + while ( dbPortNum < 6 ) { + dbPortMode = (UINT8) (SataPortMode & 3); + if ( (dbPortMode == BIT0) || (dbPortMode == BIT1) ) { + RWMEM (ddBar5 + SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0xFE, 0x00); + } + dbPortNum ++; + SataPortMode >>= 2; + } + WritePCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar); + //Disable write access to pci header, pm capabilities + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, ~BIT0, 0); +} + + +/** + * sataInitMidPost - Config SATA controller in Middle POST. + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +sataInitMidPost ( + IN AMDSBCFG* pConfig + ) +{ + UINT32 ddBar5; + sataBar5setting (pConfig, &ddBar5); + //If this is not S3 resume and also if SATA set to one of IDE mode, then implement drive detection workaround. + if ( ! (pConfig->S3Resume) && ( ((pConfig->SataClass) != AHCI_MODE) && ((pConfig->SataClass) != RAID_MODE) ) ) { + sataDriveDetection (pConfig, &ddBar5); + } +} + +/** + * sataDriveDetection - Sata drive detection + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * @param[in] *pBar5 Sata BAR5 base address. + * + */ +VOID +sataDriveDetection ( + IN AMDSBCFG* pConfig, + IN UINT32 *pBar5 + ) +{ + UINT32 ddVar0; + UINT8 dbPortNum; + UINT8 dbVar0; + UINT16 dwIoBase; + UINT32 dwVar0; + if ( (pConfig->SataClass == NATIVE_IDE_MODE) || (pConfig->SataClass == LEGACY_IDE_MODE) || (pConfig->SataClass == IDE_TO_AHCI_MODE) ) { + for ( dbPortNum = 0; dbPortNum < 4; dbPortNum++ ) { + ReadMEM (*pBar5 + SB_SATA_BAR5_REG128 + dbPortNum * 0x80, AccWidthUint32, &ddVar0); + if ( ( ddVar0 & 0x0F ) == 0x03 ) { + if ( dbPortNum & BIT0 ) { + //this port belongs to secondary channel + ReadPCI (((UINT32) (SATA_BUS_DEV_FUN << 16) + SB_SATA_REG18), AccWidthUint16, &dwIoBase); + } else { + //this port belongs to primary channel + ReadPCI (((UINT32) (SATA_BUS_DEV_FUN << 16) + SB_SATA_REG10), AccWidthUint16, &dwIoBase); + } + //if legacy ide mode, then the bar registers don't contain the correct values. So we need to hardcode them + if ( pConfig->SataClass == LEGACY_IDE_MODE ) { + dwIoBase = ( (0x170) | ((UINT16) ( (~((UINT8) (dbPortNum & BIT0) << 7)) & 0x80 )) ); + } + if ( dbPortNum & BIT1 ) { + //this port is slave + dbVar0 = 0xB0; + } else { + //this port is master + dbVar0 = 0xA0; + } + dwIoBase &= 0xFFF8; + WriteIO (dwIoBase + 6, AccWidthUint8, &dbVar0); + //Wait in loop for 30s for the drive to become ready + for ( dwVar0 = 0; dwVar0 < 300000; dwVar0++ ) { + ReadIO (dwIoBase + 7, AccWidthUint8, &dbVar0); + if ( (dbVar0 & 0x88) == 0 ) { + break; + } + SbStall (100); + } + } //end of if ( ( ddVar0 & 0x0F ) == 0x03) + } //for (dbPortNum = 0; dbPortNum < 4; dbPortNum++) + } //if ( (pConfig->SataClass == NATIVE_IDE_MODE) || (pConfig->SataClass == LEGACY_IDE_MODE) || (pConfig->SataClass == IDE_TO_AHCI_MODE)) +} + +/** + * sataInitLatePost - Prepare SATA controller to boot to OS. + * + * - Set class ID to AHCI (if set to AHCI * Mode) + * - Enable AHCI interrupt + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +sataInitLatePost ( + IN AMDSBCFG* pConfig + ) +{ + UINT32 ddBar5; + UINT8 dbVar; + UINT8 dbPortNum; + + //Return immediately is sata controller is not enabled + if ( pConfig->SATAMODE.SataMode.SataController == 0 ) { + return; + } + //Enable write access to pci header, pm capabilities + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, 0xff, BIT0); + +// if ((pConfig->SATAMODE.SataMode.SataIdeCombinedMode) == SATA_IDE_COMBINE_DISABLE) { + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 1), AccWidthUint8 | S3_SAVE, ~BIT7, BIT7); +// } + sataBar5setting (pConfig, &ddBar5); + + ReadPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar); + //Enable memory and io access + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, 0xFF, 0x03); + + shutdownUnconnectedSataPortClock (pConfig, ddBar5); + + if (( pConfig->SataClass == IDE_TO_AHCI_MODE) || ( pConfig->SataClass == IDE_TO_AHCI_MODE_4394 )) { + //program the AHCI class code + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG08), AccWidthUint32 | S3_SAVE, 0, 0x01060100); + //Set interrupt enable bit + RWMEM ((ddBar5 + 0x04), AccWidthUint8, (UINT32)~0, BIT1); + //program the correct device id for AHCI mode + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, 0, 0x4391); + } + + if (( pConfig->SataClass == AHCI_MODE_4394 ) || ( pConfig->SataClass == IDE_TO_AHCI_MODE_4394 )) { + //program the correct device id for AHCI 4394 mode + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, 0, 0x4394); + } + + //Clear error status ?? only 4 port + RWMEM ((ddBar5 + SB_SATA_BAR5_REG130), AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); + RWMEM ((ddBar5 + SB_SATA_BAR5_REG1B0), AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); + RWMEM ((ddBar5 + SB_SATA_BAR5_REG230), AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); + RWMEM ((ddBar5 + SB_SATA_BAR5_REG2B0), AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); + RWMEM ((ddBar5 + SB_SATA_BAR5_REG330), AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); + RWMEM ((ddBar5 + SB_SATA_BAR5_REG3B0), AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); + //Restore memory and io access bits + WritePCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar ); + //Disable write access to pci header and pm capabilities + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, ~BIT0, 0); + for ( dbPortNum = 0; dbPortNum < 6; dbPortNum++ ) { + RWMEM ((ddBar5 + 0x110 + (dbPortNum * 0x80)), AccWidthUint32, 0xFFFFFFFF, 0x00); + } +} + + diff --git a/src/vendorcode/amd/cimx/sb800/SbCmn.c b/src/vendorcode/amd/cimx/sb800/SbCmn.c new file mode 100644 index 0000000..8e9f0e2 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/SbCmn.c @@ -0,0 +1,1066 @@ +/** + * @file + * + * Southbridge Initial routine + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: CIMx-SB + * @e sub-project: + * @e $Revision:$ @e $Date:$ + * + */ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#include "SBPLATFORM.h" +#include "cbtypes.h" +// +// Declaration of local functions +// + +VOID abcfgTbl (IN ABTBLENTRY* pABTbl); + +/** + * sbUsbPhySetting - USB Phy Calibration Adjustment + * + * + * @param[in] Value Controller PCI config address (bus# + device# + function#) + * + */ +VOID sbUsbPhySetting (IN UINT32 Value); + + +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page LegacyInterfaceCalls Legacy Interface Calls + * <TD>@subpage SB_POWERON_INIT_Page "SB_POWERON_INIT"</TD><TD></TD> + * <TD>@subpage SB_BEFORE_PCI_INIT_Page "SB_BEFORE_PCI_INIT"</TD><TD></TD> + * <TD>@subpage SB_AFTER_PCI_INIT_Page "SB_AFTER_PCI_INIT"</TD><TD></TD> + * <TD>@subpage SB_LATE_POST_INIT_Page "SB_LATE_POST_INIT"</TD><TD></TD> + * <TD>@subpage SB_BEFORE_PCI_RESTORE_INIT_Page "SB_BEFORE_PCI_RESTORE_INIT"</TD><TD></TD> + * <TD>@subpage SB_AFTER_PCI_RESTORE_INIT_Page "SB_AFTER_PCI_RESTORE_INIT"</TD><TD></TD> + * <TD>@subpage SB_SMM_SERVICE_Page "SB_SMM_SERVICE"</TD><TD></TD> + * <TD>@subpage SB_SMM_ACPION_Page "SB_SMM_ACPION"</TD><TD></TD> + * + * @page LegacyInterfaceCallOuts Legacy Interface CallOuts + * <TD>@subpage CB_SBGPP_RESET_ASSERT_Page CB_SBGPP_RESET_ASSERT + * <TD>@subpage CB_SBGPP_RESET_DEASSERT_Page CB_SBGPP_RESET_DEASSERT + * +*/ + +/** + * sbEarlyPostByteInitTable - PCI device registers initial during early POST. + * + */ +const static REG8MASK sbEarlyPostByteInitTable[] = +{ + // SMBUS Device (Bus 0, Dev 20, Func 0) + {0x00, SMBUS_BUS_DEV_FUN, 0}, + {SB_CFG_REG10, 0X00, (SBCIMx_Version & 0xFF)}, //Program the version information + {SB_CFG_REG11, 0X00, (SBCIMx_Version >> 8)}, + {0xFF, 0xFF, 0xFF}, + + // IDE Device (Bus 0, Dev 20, Func 1) + {0x00, IDE_BUS_DEV_FUN, 0}, + {SB_IDE_REG62 + 1, ~BIT0, BIT5}, // Enabling IDE Explicit Pre-Fetch IDE PCI Config 0x62[8]=0 + // Allow MSI capability of IDE controller to be visible. IDE PCI Config 0x62[13]=1 + {0xFF, 0xFF, 0xFF}, + + // Azalia Device (Bus 0, Dev 20, Func 2) + {0x00, AZALIA_BUS_DEV_FUN, 0}, + {SB_AZ_REG4C, ~BIT0, BIT0}, + {0xFF, 0xFF, 0xFF}, + + // LPC Device (Bus 0, Dev 20, Func 3) + {0x00, LPC_BUS_DEV_FUN, 0}, + {SB_LPC_REG40, ~BIT2, BIT2}, // RPR 1.1 Enabling LPC DMA Function 0x40[2]=1b 0x78[0]=0b + {SB_LPC_REG78, ~BIT0, 00}, // RPR 1.1 Enabling LPC DMA Function 0x40[2]=1b 0x78[0]=0b + {SB_LPC_REG78, ~BIT1, 00}, // Disables MSI capability + {SB_LPC_REGBB, ~BIT0, BIT0 + BIT3 + BIT4 + BIT5}, // Enabled SPI Prefetch from HOST. + {0xFF, 0xFF, 0xFF}, + + // PCIB Bridge (Bus 0, Dev 20, Func 4) + {0x00, PCIB_BUS_DEV_FUN, 0}, + {SB_PCIB_REG40, 0xFF, BIT5}, // RPR PCI-bridge Subtractive Decode + {SB_PCIB_REG4B, 0xFF, BIT7}, // + {SB_PCIB_REG66, 0xFF, BIT4}, // RPR Enabling One-Prefetch-Channel Mode, PCIB_PCI_config 0x64 [20] + {SB_PCIB_REG65, 0xFF, BIT7}, // RPR proper operation of CLKRUN#. + {SB_PCIB_REG0D, 0x00, 0x40}, // Setting Latency Timers to 0x40, Enables the PCIB to retain ownership + {SB_PCIB_REG1B, 0x00, 0x40}, // of the bus on the Primary side and on the Secondary side when GNT# is deasserted. + {SB_PCIB_REG66 + 1, 0xFF, BIT1}, // RPR Enable PCI bus GNT3#.. + {0xFF, 0xFF, 0xFF}, + + // SATA Device (Bus 0, Dev 17, Func 0) + {0x00, SATA_BUS_DEV_FUN, 0}, + {SB_SATA_REG44, 0xff, BIT0}, // Enables the SATA watchdog timer register prior to the SATA BIOS post + {SB_SATA_REG44 + 2, 0, 0x20}, // RPR 8.12 SATA PCI Watchdog timer setting + // [SB01923] Set timer out to 0x20 to fix IDE to SATA Bridge dropping drive issue. + {0xFF, 0xFF, 0xFF}, +}; + + +/** + * sbPmioEPostInitTable - Southbridge ACPI MMIO initial during POST. + * + */ +const static AcpiRegWrite sbPmioEPostInitTable[] = +{ + // HPET workaround + {PMIO_BASE >> 8, SB_PMIOA_REG54 + 3, 0xFC, BIT0 + BIT1}, + {PMIO_BASE >> 8, SB_PMIOA_REG54 + 2, 0x7F, BIT7}, + {PMIO_BASE >> 8, SB_PMIOA_REG54 + 2, 0x7F, 0x00}, + // End of HPET workaround + // Enable SB800 A12 ACPI bits at PMIO 0xC0 [30,10:3] + // ClrAllStsInThermalEvent 3 Set to 1 to allow ASF remote power down/power cycle, Thermal event, Fan slow event to clear all the Gevent status and enabled bits. The bit should be set to 1 all the time. + // UsbGoodClkDlyEn 4 Set to 1 to delay de-assertion of Usb clk by 6 Osc clk. The bit should be set to 1 all the time. + // ForceNBCPUPwr 5 Set to 1 to force CPU pwrGood to be toggled along with NB pwrGood. + // MergeUsbPerReq 6 Set to 1 to merge usb perdical traffic into usb request as one of break event. + // IMCWatchDogRstEn 7 Set to 1 to allow IMC watchdog timer to reset entire acpi block. The bit should be set to 1 when IMC is enabled. + // GeventStsFixEn 8 1: Gevent status is not reset by its enable bit. 0: Gevent status is reset by its enable bit. + // PmeTimerFixEn 9 Set to 1 to reset Pme Timer when going to sleep state. + // UserRst2EcEn 10 Set to 1 to route user reset event to Ec. The bit should be set to 1 when IMC is enabled. + // Smbus0ClkSEn 30 Set to 1 to enable SMBus0 controller clock stretch support. + {PMIO_BASE >> 8, SB_PMIOA_REGC4, ~(BIT2 + BIT4), BIT2 + BIT4}, + {PMIO_BASE >> 8, SB_PMIOA_REGC0, 0, 0xF9}, + // PM_reg xC1 [3] = 1b, per RPR 2.7 CPU PwrGood Setting + {PMIO_BASE >> 8, SB_PMIOA_REGC0 + 1, 0x04, 0x0B}, + // RtcSts 19-17 RTC_STS set only in Sleep State. + // GppPme 20 Set to 1 to enable PME request from SB GPP. + // Pcireset 22 Set to 1 to allow SW to reset PCIe. + {PMIO_BASE >> 8, SB_PMIOA_REGC2, 0x20, 0x58}, + {PMIO_BASE >> 8, SB_PMIOA_REGC2 + 1, 0, 0x40}, + + //Item Id: SB02037: RTC_STS should be set in S state + //set PMIO 0xC0 [19:16] Set to 1110 to allow RTC_STS to be set only in non_G0 state. + //{PMIO_BASE >> 8, SB_PMIOA_REGC2, (UINT8)~(0x0F), 0x0E}, + + //Item Id: SB02034 + //Title: SB GPP NIC auto wake at second time sleep + //set PMIO 0xC4 bit 2 to 1 then set PMIO 0xC0 bit 20 to 1 to enable fix for SB02034 + + {PMIO_BASE >> 8, SB_PMIOA_REGC2, ~(BIT4), BIT4}, + + //{GPIO_BASE >> 8, SB_GPIO_REG62 , 0x00, 0x4E}, + {PMIO_BASE >> 8, SB_PMIOA_REG74, 0x00, BIT0 + BIT1 + BIT2 + BIT4}, + {PMIO_BASE >> 8, SB_PMIOA_REGDE + 1, ~(BIT0 + BIT1), BIT0 + BIT1}, + {PMIO_BASE >> 8, SB_PMIOA_REGDE, ~BIT4, BIT4}, + {PMIO_BASE >> 8, SB_PMIOA_REGBA, ~BIT3, BIT3}, + {PMIO_BASE >> 8, SB_PMIOA_REGBA + 1, ~BIT6, BIT6}, + {PMIO_BASE >> 8, SB_PMIOA_REGBC, ~BIT1, BIT1}, + {PMIO_BASE >> 8, SB_PMIOA_REGED, ~(BIT0 + BIT1), 0}, + //RPR Hiding Flash Controller PM_IO 0xDC[7] = 0x0 & PM_IO 0xDC [1:0]=0x01 + {PMIO_BASE >> 8, SB_PMIOA_REGDC, 0x7C, BIT0}, + // RPR Turning off FC clock + {MISC_BASE >> 8, SB_MISC_REG40 + 1, ~(BIT3 + BIT2), BIT3 + BIT2}, + {MISC_BASE >> 8, SB_MISC_REG40 + 2, ~BIT0, BIT0}, + {SMI_BASE >> 8, SB_SMI_Gevent0, 0, 29}, + {SMI_BASE >> 8, SB_SMI_Gevent1, 0, 1}, + {SMI_BASE >> 8, SB_SMI_Gevent2, 0, 29}, + {SMI_BASE >> 8, SB_SMI_Gevent3, 0, 29}, + {SMI_BASE >> 8, SB_SMI_Gevent4, 0, 4}, + {SMI_BASE >> 8, SB_SMI_Gevent5, 0, 5}, + {SMI_BASE >> 8, SB_SMI_Gevent6, 0, 6}, + {SMI_BASE >> 8, SB_SMI_Gevent7, 0, 29}, + + {SMI_BASE >> 8, SB_SMI_Gevent9, 0, 29}, + {SMI_BASE >> 8, SB_SMI_Gevent10, 0, 29}, + {SMI_BASE >> 8, SB_SMI_Gevent11, 0, 29}, + {SMI_BASE >> 8, SB_SMI_Gevent12, 0, 29}, + {SMI_BASE >> 8, SB_SMI_Gevent13, 0, 29}, + {SMI_BASE >> 8, SB_SMI_Gevent14, 0, 29}, + {SMI_BASE >> 8, SB_SMI_Gevent15, 0, 29}, + {SMI_BASE >> 8, SB_SMI_Gevent16, 0, 29}, + {SMI_BASE >> 8, SB_SMI_Gevent17, 0, 29}, + {SMI_BASE >> 8, SB_SMI_Gevent18, 0, 29}, + {SMI_BASE >> 8, SB_SMI_Gevent19, 0, 29}, + {SMI_BASE >> 8, SB_SMI_Gevent20, 0, 29}, + {SMI_BASE >> 8, SB_SMI_Gevent21, 0, 29}, + {SMI_BASE >> 8, SB_SMI_Gevent22, 0, 29}, + {SMI_BASE >> 8, SB_SMI_Gevent23, 0, 29}, +// + {SMI_BASE >> 8, SB_SMI_Usbwakup0, 0, 11}, + {SMI_BASE >> 8, SB_SMI_Usbwakup1, 0, 11}, + {SMI_BASE >> 8, SB_SMI_Usbwakup2, 0, 11}, + {SMI_BASE >> 8, SB_SMI_Usbwakup3, 0, 11}, + {SMI_BASE >> 8, SB_SMI_IMCGevent0, 0, 12}, + {SMI_BASE >> 8, SB_SMI_IMCGevent1, 0, 29}, + {SMI_BASE >> 8, SB_SMI_FanThGevent, 0, 13}, + {SMI_BASE >> 8, SB_SMI_SBGppPme0, 0, 15}, + {SMI_BASE >> 8, SB_SMI_SBGppPme1, 0, 16}, + {SMI_BASE >> 8, SB_SMI_SBGppPme2, 0, 17}, + {SMI_BASE >> 8, SB_SMI_SBGppPme3, 0, 18}, + {SMI_BASE >> 8, SB_SMI_SBGppHp0, 0, 29}, + {SMI_BASE >> 8, SB_SMI_SBGppHp1, 0, 29}, + {SMI_BASE >> 8, SB_SMI_SBGppHp2, 0, 29}, + {SMI_BASE >> 8, SB_SMI_SBGppHp3, 0, 29}, + {SMI_BASE >> 8, SB_SMI_GecPme, 0, 19}, + {SMI_BASE >> 8, SB_SMI_CIRPme, 0, 23}, + {SMI_BASE >> 8, SB_SMI_Gevent8, 0, 26}, + {SMI_BASE >> 8, SB_SMI_AzaliaPme, 0, 27}, + {SMI_BASE >> 8, SB_SMI_SataGevent0, 0, 30}, + {SMI_BASE >> 8, SB_SMI_SataGevent1, 0, 31}, + + {SMI_BASE >> 8, SB_SMI_WakePinGevent, 0, 29}, + {SMI_BASE >> 8, SB_SMI_ASFMasterIntr, 0, 29}, + {SMI_BASE >> 8, SB_SMI_ASFSlaveIntr, 0, 29}, + +// {SMI_BASE >> 8, SB_SMI_REG04, ~BIT4, BIT4}, +// {SMI_BASE >> 8, SB_SMI_REG04 + 1, ~BIT0, BIT0}, +// {SMI_BASE >> 8, SB_SMI_REG04 + 2, ~BIT3, BIT3}, + {SMI_BASE >> 8, SB_SMI_REG08, ~BIT4, 0}, + {SMI_BASE >> 8, SB_SMI_REG08+3, ~BIT2, 0}, +// {SMI_BASE >> 8, SB_SMI_REG0C, ~BIT4, BIT4}, + {SMI_BASE >> 8, SB_SMI_REG0C + 2, ~BIT3, BIT3}, + {SMI_BASE >> 8, SB_SMI_TWARN, 0, 9}, + {SMI_BASE >> 8, SB_SMI_TMI, 0, 29}, + {0xFF, 0xFF, 0xFF, 0xFF}, +}; + +/** + * abTblEntry800 - AB-Link Configuration Table for SB800 + * + */ +const static ABTBLENTRY abTblEntry800[] = +{ + // RPR Enable downstream posted transactions to pass non-posted transactions. + {ABCFG, SB_ABCFG_REG10090, BIT8 + BIT16, BIT8 + BIT16}, + + // RPR Enable SB800 to issue memory read/write requests in the upstream direction. + {AXCFG, SB_AB_REG04, BIT2, BIT2}, + + // RPR Enabling IDE/PCIB Prefetch for Performance Enhancement + // PCIB prefetch ABCFG 0x10060 [20] = 1 ABCFG 0x10064 [20] = 1 + {ABCFG, SB_ABCFG_REG10060, BIT20, BIT20}, // PCIB prefetch enable + {ABCFG, SB_ABCFG_REG10064, BIT20, BIT20}, // PCIB prefetch enable + + // RPR Controls the USB OHCI controller prefetch used for enhancing performance of ISO out devices. + // RPR Setting B-Link Prefetch Mode (ABCFG 0x80 [18:17] = 11) + {ABCFG, SB_ABCFG_REG80, BIT0 + BIT17 + BIT18, BIT0 + BIT17 + BIT18}, + + // RPR Enabled SMI ordering enhancement. ABCFG 0x90[21] + // RPR USB Delay A-Link Express L1 State. ABCFG 0x90[17] + {ABCFG, SB_ABCFG_REG90, BIT21 + BIT17, BIT21 + BIT17}, + + // RPR Disable the credit variable in the downstream arbitration equation + // RPR Register bit to qualify additional address bits into downstream register programming. (A12 BIT1 default is set) + {ABCFG, SB_ABCFG_REG9C, BIT0, BIT0}, + + // RPR Enabling Detection of Upstream Interrupts ABCFG 0x94 [20] = 1 + // ABCFG 0x94 [19:0] = cpu interrupt delivery address [39:20] + {ABCFG, SB_ABCFG_REG94, BIT20, BIT20 + 0x00FEE}, + + // RPR Programming cycle delay for AB and BIF clock gating + // RPR Enable the AB and BIF clock-gating logic. + // RPR Enable the A-Link int_arbiter enhancement to allow the A-Link bandwidth to be used more efficiently + // RPR Enable the requester ID for upstream traffic. [16]: SB/NB link [17]: GPP + {ABCFG, SB_ABCFG_REG10054, 0x00FFFFFF, 0x010407FF}, + {ABCFG, SB_ABCFG_REG98, 0xFFFF00FF, 0x00034700}, + {ABCFG, SB_ABCFG_REG54, 0x00FF0000, 0x00040000}, + // RPR Non-Posted Memory Write Support + {AX_INDXC, SB_AX_INDXC_REG10, BIT9, BIT9}, + {ABCFG, 0, 0, (UINT8) 0xFF}, // This dummy entry is to clear ab index + { (UINT8)0xFF, (UINT8)0xFF, (UINT8)0xFF, (UINT8)0xFF}, +}; + +/** + * SbPcieOrderRule - AB-Link Configuration Table for ablink Post Pass Np Downstream/Upstream Feature + * + */ +const static ABTBLENTRY SbPcieOrderRule[] = +{ +// abPostPassNpDownStreamTbl + {ABCFG, SB_ABCFG_REG10060, BIT31, BIT31}, + {ABCFG, SB_ABCFG_REG1009C, BIT4 + BIT5, BIT4 + BIT5}, + {ABCFG, SB_ABCFG_REG9C, BIT2 + BIT3 + BIT4 + BIT5 + BIT6 + BIT7, BIT2 + BIT3 + BIT4 + BIT5 + BIT6 + BIT7}, + {ABCFG, SB_ABCFG_REG90, BIT21 + BIT22 + BIT23, BIT21 + BIT22 + BIT23}, + {ABCFG, SB_ABCFG_REGF0, BIT6 + BIT5, BIT6 + BIT5}, + {AXINDC, SB_AX_INDXC_REG02, BIT9, BIT9}, + {ABCFG, SB_ABCFG_REG10090, BIT9 + BIT10 + BIT11 + BIT12, BIT9 + BIT10 + BIT11 + BIT12}, +// abPostPassNpUpStreamTbl + {ABCFG, SB_ABCFG_REG58, BIT10, BIT10}, + {ABCFG, SB_ABCFG_REGF0, BIT3 + BIT4, BIT3 + BIT4}, + {ABCFG, SB_ABCFG_REG54, BIT1, BIT1}, + { (UINT8)0xFF, (UINT8)0xFF, (UINT8)0xFF, (UINT8)0xFF}, +}; + +/** + * commonInitEarlyBoot - Config Southbridge SMBUS/ACPI/IDE/LPC/PCIB. + * + * This settings should be done during S3 resume also + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +commonInitEarlyBoot ( + IN AMDSBCFG* pConfig + ) +{ + UINT32 abValue; + UINT16 dwTempVar; + CPUID_DATA CpuId; + UINT8 cimNativepciesupport; + UINT8 cimIrConfig; + UINT8 Data; + + cimNativepciesupport = (UINT8) pConfig->NativePcieSupport; + cimIrConfig = (UINT8) pConfig->IrConfig; +#if SB_CIMx_PARAMETER == 0 + cimNativepciesupport = cimNativepciesupportDefault; + cimIrConfig = cimIrConfigDefault; +#endif + + //IR init Logical device 0x05 + if ( cimIrConfig ) { + // Enable EC_PortActive + RWPCI (((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4), AccWidthUint16 | S3_SAVE, 0xFFFE, BIT0); + EnterEcConfig (); + RWEC8 (0x07, 0x00, 0x05); //Select logical device 05, IR controller + RWEC8 (0x60, 0x00, 0x05); //Set Base Address to 550h + RWEC8 (0x61, 0x00, 0x50); + RWEC8 (0x70, 0xF0, 0x05); //Set IRQ to 05h + RWEC8 (0x30, 0x00, 0x01); //Enable logical device 5, IR controller + Data = 0xAB; + WriteIO (0x550, AccWidthUint8, &Data); + ReadIO (0x551, AccWidthUint8, &Data); + Data = ((Data & 0xFC ) | cimIrConfig); + WriteIO (0x551, AccWidthUint8, &Data); + ExitEcConfig (); + Data = 0xA0; // EC APIC index + WriteIO (SB_IOMAP_REGC00, AccWidthUint8, &Data); + Data = 0x05; // IRQ5 + WriteIO (SB_IOMAP_REGC01, AccWidthUint8, &Data); + } else { + EnterEcConfig (); + RWEC8 (0x07, 0x00, 0x05); //Select logical device 05, IR controller + RWEC8 (0x30, 0x00, 0x00); //Disable logical device 5, IR controller + ExitEcConfig (); + } + + + CpuidRead (0x01, &CpuId); + + // + // SB CFG programming + // + //Make BAR registers of smbus visible. + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8 + 1, AccWidthUint8, ~BIT6, 0); + //Early post initialization of pci config space + programPciByteTable ((REG8MASK*) FIXUP_PTR (&sbEarlyPostByteInitTable[0]), sizeof (sbEarlyPostByteInitTable) / sizeof (REG8MASK) ); + if ( pConfig->BuildParameters.SmbusSsid != 0 ) { + RWPCI ((SMBUS_BUS_DEV_FUN << 16) + SB_CFG_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pConfig->BuildParameters.SmbusSsid); + } + //Make BAR registers of smbus invisible. + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8 + 1, AccWidthUint8, ~BIT6, BIT6); + + // + // LPC CFG programming + // + // SSID for LPC Controller + if (pConfig->BuildParameters.LpcSsid != 0 ) { + RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pConfig->BuildParameters.LpcSsid); + } + // LPC MSI + if ( pConfig->BuildParameters.LpcMsi) { + RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG78, AccWidthUint32 | S3_SAVE, ~BIT1, BIT1); + } + + // + // PCIB CFG programming + // + //Disable or Enable PCI Clks based on input + RWPCI ((PCIB_BUS_DEV_FUN << 16) + SB_PCIB_REG42, AccWidthUint8 | S3_SAVE, ~(BIT5 + BIT4 + BIT3 + BIT2), ((pConfig->PciClks) & 0x0F) << 2 ); + RWPCI ((PCIB_BUS_DEV_FUN << 16) + SB_PCIB_REG4A, AccWidthUint8 | S3_SAVE, ~(BIT1 + BIT0), (pConfig->PciClks) >> 4 ); + // PCIB MSI + if ( pConfig->BuildParameters.PcibMsi) { + RWPCI ((PCIB_BUS_DEV_FUN << 16) + SB_PCIB_REG40, AccWidthUint8 | S3_SAVE, ~BIT3, BIT3); + } + + // + // AB CFG programming + // + // Read Arbiter address, Arbiter address is in PMIO 6Ch + ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG6C, AccWidthUint16, &dwTempVar); + RWIO (dwTempVar, AccWidthUint8, 0, 0); // Write 0 to enable the arbiter + + abLinkInitBeforePciEnum (pConfig); // Set ABCFG registers + // AB MSI + if ( pConfig->BuildParameters.AbMsi) { + abValue = readAlink (SB_ABCFG_REG94 | (UINT32) (ABCFG << 29)); + abValue = abValue | BIT20; + writeAlink (SB_ABCFG_REG94 | (UINT32) (ABCFG << 29), abValue); + } + + + // + // SB Specific Function programming + // + + // PCIE Native setting + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGBA + 1, AccWidthUint8, ~BIT14, 0); + if ( pConfig->NativePcieSupport == 1) { + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG74 + 3, AccWidthUint8, ~(BIT3 + BIT1 + BIT0), BIT2 + BIT0); + } else { + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG74 + 3, AccWidthUint8, ~(BIT3 + BIT1 + BIT0), BIT2); + } + +#ifdef ACPI_SLEEP_TRAP + // Set SLP_TYPE as SMI event + RWMEM (ACPI_MMIO_BASE + SMI_BASE + SB_SMI_REGB0, AccWidthUint8, ~(BIT2 + BIT3), BIT2); + // Disabled SLP function for S1/S3/S4/S5 + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGBE, AccWidthUint8, ~BIT5, 0x00); + // Set S state transition disabled (BIT0) force ACPI to send SMI message when writing to SLP_TYP Acpi register. (BIT1) + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG08 + 3, AccWidthUint8, ~(BIT0 + BIT1), BIT1); + // Enabled Global Smi ( BIT7 clear as 0 to enable ) + RWMEM (ACPI_MMIO_BASE + SMI_BASE + SB_SMI_REG98 + 3 , AccWidthUint8, ~BIT7, 0x00); +#endif + if ( pConfig->SbUsbPll == 0) { + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF3, AccWidthUint8, 0, 0x20); + } + // Set Stutter timer settings + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG80 + 1, AccWidthUint8, ~(BIT3 + BIT4), BIT3 + BIT4); + // Set LDTSTP# duration to 10us for HydraD CPU, or when HT link is 200MHz + if ((pConfig->AnyHT200MhzLink) || ((CpuId.EAX_Reg & 0x00ff00f0) == 0x100080) || ((CpuId.EAX_Reg & 0x00ff00f0) == 0x100090) || ((CpuId.EAX_Reg & 0x00ff00f0) == 0x1000A0)) { + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG94, AccWidthUint8, 0, 0x0A); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG80 + 3, AccWidthUint8 | S3_SAVE, 0xFE, 0x28); + } else { + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG94, AccWidthUint8, 0, 0x01); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG80 + 3, AccWidthUint8 | S3_SAVE, 0xFE, 0x20); + } + + //PM_Reg 0x7A[15] (CountHaltMsgEn) should be set when C1e option is enabled + //PM_Reg 0x7A[3:0] (NumOfCpu) should be set to 1h when C1e option is enabled + //PM_Reg 0x80[13] has to set to 1 to enable Message C scheme. + if (pConfig->MTC1e) { + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG7A, AccWidthUint16 | S3_SAVE, 0x7FF0, BIT15 + 1); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG80 + 1, AccWidthUint8 | S3_SAVE, ~BIT5, BIT5); + } + + programSbAcpiMmioTbl ((AcpiRegWrite *) (pConfig->OEMPROGTBL.OemProgrammingTablePtr_Ptr)); +} + +/** + * abSpecialSetBeforePciEnum - Special setting ABCFG registers before PCI emulation. + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +abSpecialSetBeforePciEnum ( + IN AMDSBCFG* pConfig + ) +{ + UINT32 abValue; + abValue = readAlink (SB_ABCFG_REGC0 | (UINT32) (ABCFG << 29)); + abValue &= 0xf0; + if ( pConfig->SbPcieOrderRule && abValue ) { + abValue = readAlink (SB_RCINDXC_REG02 | (UINT32) (RCINDXC << 29)); + abValue = abValue | BIT9; + writeAlink (SB_RCINDXC_REG02 | (UINT32) (RCINDXC << 29), abValue); + } +} + +VOID +usbDesertPll ( + IN AMDSBCFG* pConfig + ) +{ + if ( pConfig->SbUsbPll == 0) { + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF3, AccWidthUint8, 0, 0x00); + } +} + +/** + * commonInitEarlyPost - Config Southbridge SMBUS/ACPI/IDE/LPC/PCIB. + * + * This settings might not program during S3 resume + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +commonInitEarlyPost ( + IN AMDSBCFG* pConfig + ) +{ + UINT8 dbPortStatus; + UINT8 cimSpreadSpectrum; + UINT32 cimSpreadSpectrumType; + AMDSBCFG* pTmp; + pTmp = pConfig; + + cimSpreadSpectrum = pConfig->SpreadSpectrum; + cimSpreadSpectrumType = pConfig->BuildParameters.SpreadSpectrumType; +#if SB_CIMx_PARAMETER == 0 + cimSpreadSpectrum = cimSpreadSpectrumDefault; + cimSpreadSpectrumType = cimSpreadSpectrumTypeDefault; +#endif + programSbAcpiMmioTbl ((AcpiRegWrite*) FIXUP_PTR (&sbPmioEPostInitTable[0])); + + // CallBackToOEM (PULL_UP_PULL_DOWN_SETTINGS, NULL, pConfig); + + if ( cimSpreadSpectrum ) { + // Misc_Reg_40[25]=1 -> allow to change spread profile + // Misc_Reg19=83 -> new spread profile + // Misc_Reg[12:10]=9975be + // Misc_Reg0B=91 + // Misc_Reg09=21 + // Misc_Misc_Reg_08[0]=1 -> enable spread + RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x43, AccWidthUint8, ~BIT1, BIT1); + RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x19, AccWidthUint8, 0, 0x83); + getChipSysMode (&dbPortStatus); + if ( ((dbPortStatus & ChipSysIntClkGen) != ChipSysIntClkGen) ) { + RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x1A, AccWidthUint8, ~(BIT5 + BIT6 + BIT7), 0x80); + } + + if ( cimSpreadSpectrumType == 0 ) { + RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x12, AccWidthUint8, 0, 0x99); + RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x11, AccWidthUint8, 0, 0x75); + RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x10, AccWidthUint8, 0, 0xBE); + RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x0B, AccWidthUint8, 0, 0x91); + RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x09, AccWidthUint8, 0, 0x21); + } else { // Spread profile for Ontario CPU related platform + // This spread profile setting is for Ontario HDMI & DVI output from DP with -0.425% + // Misc_Reg[12:10]=828FA8 + // Misc_Reg0B=11 + // Misc_Reg09=21 + // Misc_Reg10[25:24]=01b + RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x12, AccWidthUint8, 0, 0x82); + RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x11, AccWidthUint8, 0, 0x8F); + RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x10, AccWidthUint8, 0, 0xA8); + RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x0B, AccWidthUint8, 0, 0x11); + RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x09, AccWidthUint8, 0, 0x21); + RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x13, AccWidthUint8, 0xFC, 0x1); + } + + RWMEM (ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG08, AccWidthUint8, 0xFE, 0x01); + } else { + RWMEM (ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG08, AccWidthUint8, 0xFE, 0x00); + } + + // RPR PLL 100Mhz Reference Clock Buffer setting for internal clock generator mode + getChipSysMode (&dbPortStatus); + if ( ((dbPortStatus & ChipSysIntClkGen) == ChipSysIntClkGen) ) { + RWMEM (ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG04 + 1, AccWidthUint8, ~BIT5, BIT5); + } + + // Set ASF SMBUS master function enabled here (temporary) + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG28, AccWidthUint16 | S3_SAVE, ~(BIT0 + BIT2), BIT0 + BIT2); + + programSbAcpiMmioTbl ((AcpiRegWrite *) (pConfig->OEMPROGTBL.OemProgrammingTablePtr_Ptr)); +#ifndef NO_EC_SUPPORT + // Software IMC enable + if (((pConfig->BuildParameters.ImcEnableOverWrite == 1) && ((dbPortStatus & ChipSysEcEnable) == 0)) || ((pConfig->BuildParameters.ImcEnableOverWrite == 2) && ((dbPortStatus & ChipSysEcEnable) == ChipSysEcEnable))) { + if (validateImcFirmware (pConfig)) { + softwareToggleImcStrapping (pConfig); + } else { + CallBackToOEM (IMC_FIRMWARE_FAIL, 0, pConfig); + } + } +#endif + +} +/** + * abLinkInitBeforePciEnum - Set ABCFG registers before PCI emulation. + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +abLinkInitBeforePciEnum ( + IN AMDSBCFG* pConfig + ) +{ + UINT32 cimResetCpuOnSyncFlood; + ABTBLENTRY *pAbTblPtr; + AMDSBCFG* Temp; + + cimResetCpuOnSyncFlood = pConfig->ResetCpuOnSyncFlood; +#if SB_CIMx_PARAMETER == 0 + cimResetCpuOnSyncFlood = cimResetCpuOnSyncFloodDefault; +#endif + Temp = pConfig; + if ( pConfig->SbPcieOrderRule ) { + pAbTblPtr = (ABTBLENTRY *) FIXUP_PTR (&SbPcieOrderRule[0]); + abcfgTbl (pAbTblPtr); + } + pAbTblPtr = (ABTBLENTRY *) FIXUP_PTR (&abTblEntry800[0]); + abcfgTbl (pAbTblPtr); + if ( cimResetCpuOnSyncFlood ) { + rwAlink (SB_ABCFG_REG10050 | (UINT32) (ABCFG << 29), ~BIT2, BIT2); + } +} + +/** + * abcfgTbl - Program ABCFG by input table. + * + * + * @param[in] pABTbl ABCFG config table. + * + */ +VOID +abcfgTbl ( + IN ABTBLENTRY* pABTbl + ) +{ + UINT32 ddValue; + + while ( (pABTbl->regType) != 0xFF ) { + if ( pABTbl->regType > AXINDC ) { + ddValue = pABTbl->regIndex | (pABTbl->regType << 29); + writeAlink (ddValue, ((readAlink (ddValue)) & (0xFFFFFFFF^ (pABTbl->regMask))) | pABTbl->regData); + } else { + ddValue = 0x30 | (pABTbl->regType << 29); + writeAlink (ddValue, pABTbl->regIndex); + ddValue = 0x34 | (pABTbl->regType << 29); + writeAlink (ddValue, ((readAlink (ddValue)) & (0xFFFFFFFF^ (pABTbl->regMask))) | pABTbl->regData); + } + ++pABTbl; + } + + //Clear ALink Access Index + ddValue = 0; + WriteIO (ALINK_ACCESS_INDEX, AccWidthUint32 | S3_SAVE, &ddValue); +} + +/** + * commonInitLateBoot - Prepare Southbridge register setting to boot to OS. + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +commonInitLateBoot ( + IN AMDSBCFG* pConfig + ) +{ + UINT8 dbValue; + UINT32 ddVar; + // We need to do the following setting in late post also because some bios core pci enumeration changes these values + // programmed during early post. + // RPR 4.5 Master Latency Timer + + dbValue = 0x40; + WritePCI ((PCIB_BUS_DEV_FUN << 16) + SB_PCIB_REG0D, AccWidthUint8, &dbValue); + WritePCI ((PCIB_BUS_DEV_FUN << 16) + SB_PCIB_REG1B, AccWidthUint8, &dbValue); + + //SB P2P AutoClock control settings. + ddVar = (pConfig->PcibAutoClkCtrlHigh << 16) | (pConfig->PcibAutoClkCtrlLow); + WritePCI ((PCIB_BUS_DEV_FUN << 16) + SB_PCIB_REG4C, AccWidthUint32, &ddVar); + ddVar = (pConfig->PcibClkStopOverride); + RWPCI ((PCIB_BUS_DEV_FUN << 16) + SB_PCIB_REG50, AccWidthUint16, 0x3F, (UINT16) (ddVar << 6)); + + RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGBB, AccWidthUint8, 0xBF | S3_SAVE, BIT3 + BIT4 + BIT5); + + // USB Phy Calibration Adjustment + ddVar = (USB1_EHCI_BUS_DEV_FUN << 16); + sbUsbPhySetting (ddVar); + ddVar = (USB2_EHCI_BUS_DEV_FUN << 16); + sbUsbPhySetting (ddVar); + ddVar = (USB3_EHCI_BUS_DEV_FUN << 16); + sbUsbPhySetting (ddVar); + + c3PopupSetting (pConfig); + FusionRelatedSetting (pConfig); +} + +/** + * sbUsbPhySetting - USB Phy Calibration Adjustment + * + * + * @param[in] Value Controller PCI config address (bus# + device# + function#) + * + */ +VOID +sbUsbPhySetting ( + IN UINT32 Value + ) +{ + UINT32 ddBarAddress; + UINT32 ddPhyStatus03; + UINT32 ddPhyStatus4; + UINT8 dbRevId; + //Get BAR address + ReadPCI ((UINT32) Value + SB_EHCI_REG10, AccWidthUint32, &ddBarAddress); + if ( (ddBarAddress != - 1) && (ddBarAddress != 0) ) { + ReadMEM ( ddBarAddress + SB_EHCI_BAR_REGA8, AccWidthUint32, &ddPhyStatus03); + ReadMEM ( ddBarAddress + SB_EHCI_BAR_REGAC, AccWidthUint32, &ddPhyStatus4); + ddPhyStatus03 &= 0x07070707; + ddPhyStatus4 &= 0x00000007; + if ( (ddPhyStatus03 != 0x00) | (ddPhyStatus4 != 0x00) ) { + // RPR 7.7 USB 2.0 Ports Driving Strength step 1 + //Make BAR registers of smbus visible. + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8 + 1, AccWidthUint8, ~BIT6, 0); + ReadPCI ((SMBUS_BUS_DEV_FUN << 16) + SB_CFG_REG08, AccWidthUint8, &dbRevId); + //Make BAR registers of smbus invisible. + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8 + 1, AccWidthUint8, ~BIT6, BIT6); + if (dbRevId == 0x41) { // A12 + RWMEM (ddBarAddress + SB_EHCI_BAR_REGC0, AccWidthUint32, 0xFFFF00FF, 0x1500); + RWMEM (ddBarAddress + SB_EHCI_BAR_REGC4, AccWidthUint32, 0xFFFFF0FF, 0); + } else if (dbRevId == 0x42) { // A13 + RWMEM (ddBarAddress + SB_EHCI_BAR_REGC0, AccWidthUint32, 0xFFFF00FF, 0x0F00); + RWMEM (ddBarAddress + SB_EHCI_BAR_REGC4, AccWidthUint32, 0xFFFFF0FF, 0x0100); + } + } + } +} + +/** + * hpetInit - Program Southbridge HPET function + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * @param[in] pStaticOptions Platform build configuration table. + * + */ +VOID +hpetInit ( + IN AMDSBCFG* pConfig, + IN BUILDPARAM *pStaticOptions + ) +{ + DESCRIPTION_HEADER* pHpetTable; + UINT8 cimHpetTimer; + UINT8 cimHpetMsiDis; + + cimHpetTimer = (UINT8) pConfig->HpetTimer; + cimHpetMsiDis = (UINT8) pConfig->HpetMsiDis; +#if SB_CIMx_PARAMETER == 0 + cimHpetTimer = cimHpetTimerDefault; + cimHpetMsiDis = cimHpetMsiDisDefault; +#endif + pHpetTable = NULL; + if ( cimHpetTimer == TRUE ) { + //Program the HPET BAR address + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG50, AccWidthUint32 | S3_SAVE, 0xFFFFF800, pStaticOptions->HpetBase); + //Enabling decoding of HPET MMIO + //Enable HPET MSI support + //Enable High Precision Event Timer (also called Multimedia Timer) interrupt + if ( cimHpetMsiDis == FALSE ) { + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG50, AccWidthUint32 | S3_SAVE, 0xFFFFF800, BIT0 + BIT1 + BIT2 + BIT3 + BIT4); + } else { + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG50, AccWidthUint32 | S3_SAVE, 0xFFFFF800, BIT0 + BIT1); + } + + } else { + if ( ! (pConfig->S3Resume) ) { + pHpetTable = (DESCRIPTION_HEADER*) ACPI_LocateTable (Int32FromChar('H', 'P', 'E', 'T')); + } + if ( pHpetTable != NULL ) { + pHpetTable->Signature = Int32FromChar('T', 'E', 'P', 'H'); + } + } +} + +/** + * c3PopupSetting - Program Southbridge C state function + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +c3PopupSetting ( + IN AMDSBCFG* pConfig + ) +{ + AMDSBCFG* Temp; + UINT8 dbValue; + Temp = pConfig; + //RPR C-State and VID/FID Change + dbValue = getNumberOfCpuCores (); + if (dbValue > 1) { + //PM 0x80[2]=1, For system with dual core CPU, set this bit to 1 to automatically clear BM_STS when the C3 state is being initiated. + //PM 0x80[1]=1, For system with dual core CPU, set this bit to 1 and BM_STS will cause C3 to wakeup regardless of BM_RLD + //PM 0x7E[6]=1, Enable pop-up for C3. For internal bus mastering or BmReq# from the NB, the SB will de-assert + //LDTSTP# (pop-up) to allow DMA traffic, then assert LDTSTP# again after some idle time. + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG80, AccWidthUint8 | S3_SAVE, ~(BIT1 + BIT2), (BIT1 + BIT2)); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG7E, AccWidthUint8 | S3_SAVE, ~BIT6, BIT6); + } + //SB800 needs to changed for RD790 support + //PM 0x80 [8] = 0 for system with RS780 + //Note: RS690 north bridge has AllowLdtStop built for both display and PCIE traffic to wake up the HT link. + //BmReq# needs to be ignored otherwise may cause LDTSTP# not to toggle. + //PM_IO 0x80[3]=1, Ignore BM_STS_SET message from NB + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG80, AccWidthUint16 | S3_SAVE, ~(BIT9 + BIT8 + BIT7 + BIT4 + BIT3 + BIT2 + BIT1 + BIT0), 0x21F); + //LdtStartTime = 10h for minimum LDTSTP# de-assertion duration of 16us in StutterMode. This is to guarantee that + //the HT link has been safely reconnected before it can be disconnected again. If C3 pop-up is enabled, the 16us also + //serves as the minimum idle time before LDTSTP# can be asserted again. This allows DMA to finish before the HT + //link is disconnected. + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG94 + 2, AccWidthUint8, 0, 0x10); + + //This setting provides 16us delay before the assertion of LDTSTOP# when C3 is entered. The + //delay will allow USB DMA to go on in a continuous manner + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG98 + 1, AccWidthUint8, 0, 0x10); + // Not in the RPR so far, it's hand writing from ASIC + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG7C, AccWidthUint8 | S3_SAVE, 0, 0x85); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG7C + 1, AccWidthUint8 | S3_SAVE, 0, 0x01); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG7E + 1, AccWidthUint8 | S3_SAVE, ~(BIT7 + BIT5), BIT7 + BIT5); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG88 + 1, AccWidthUint8 | S3_SAVE, ~BIT4, BIT4); + // RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG94, AccWidthUint8, 0, 0x10); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG98 + 3, AccWidthUint8, 0, 0x10); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGB4 + 1, AccWidthUint8, 0, 0x0B); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG88, AccWidthUint8 | S3_SAVE, 0xFF, BIT4); + if (pConfig->LdtStpDisable) { + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG88, AccWidthUint8 | S3_SAVE, ~BIT5, 0); + } +} + +/** + * FusionRelatedSetting - Program Fusion C related function + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +FusionRelatedSetting ( + IN AMDSBCFG* pConfig + ) +{ + UINT8 cimAcDcMsg; + UINT8 cimTimerTickTrack; + UINT8 cimClockInterruptTag; + UINT8 cimOhciTrafficHanding; + UINT8 cimEhciTrafficHanding; + UINT8 cimFusionMsgCMultiCore; + UINT8 cimFusionMsgCStage; + UINT32 ddValue; + + cimAcDcMsg = (UINT8) pConfig->AcDcMsg; + cimTimerTickTrack = (UINT8) pConfig->TimerTickTrack; + cimClockInterruptTag = (UINT8) pConfig->ClockInterruptTag; + cimOhciTrafficHanding = (UINT8) pConfig->OhciTrafficHanding; + cimEhciTrafficHanding = (UINT8) pConfig->EhciTrafficHanding; + cimFusionMsgCMultiCore = (UINT8) pConfig->FusionMsgCMultiCore; + cimFusionMsgCStage = (UINT8) pConfig->FusionMsgCStage; +#if SB_CIMx_PARAMETER == 0 + cimAcDcMsg = cimAcDcMsgDefault; + cimTimerTickTrack = cimTimerTickTrackDefault; + cimClockInterruptTag = cimClockInterruptTagDefault; + cimOhciTrafficHanding = cimOhciTrafficHandingDefault; + cimEhciTrafficHanding = cimEhciTrafficHandingDefault; + cimFusionMsgCMultiCore = cimFusionMsgCMultiCoreDefault; + cimFusionMsgCStage = cimFusionMsgCStageDefault; +#endif + ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGA0, AccWidthUint32 | S3_SAVE, &ddValue); + ddValue = ddValue & 0xC07F00A0; + if ( cimAcDcMsg ) { + ddValue = ddValue | BIT0; + } + if ( cimTimerTickTrack ) { + ddValue = ddValue | BIT1; + } + if ( cimClockInterruptTag ) { + ddValue = ddValue | BIT10; + } + if ( cimOhciTrafficHanding ) { + ddValue = ddValue | BIT13; + } + if ( cimEhciTrafficHanding ) { + ddValue = ddValue | BIT15; + } + if ( cimFusionMsgCMultiCore ) { + ddValue = ddValue | BIT23; + } + if ( cimFusionMsgCStage ) { + ddValue = (ddValue | (BIT6 + BIT4 + BIT3 + BIT2)); + } + WriteMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGA0, AccWidthUint32 | S3_SAVE, &ddValue); +} +#ifndef NO_EC_SUPPORT +/** + * validateImcFirmware - Validate IMC Firmware. + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + * @retval TRUE Pass + * @retval FALSE Failed + */ +BOOLEAN +validateImcFirmware ( + IN AMDSBCFG* pConfig + ) +{ + UINT32 ImcSig; + UINT32 ImcSigAddr; + UINT32 ImcAddr; + UINT32 CurAddr; + UINT32 ImcBinSig0; + UINT32 ImcBinSig1; + UINT16 ImcBinSig2; + UINT8 dbIMCChecksume; + UINT8 dbIMC; + ImcAddr = 0; + + // Software IMC enable + ImcSigAddr = 0x80000; // start from 512k to 64M + ImcSig = 0x0; // + while ( ( ImcSig != 0x55aa55aa ) && ( ImcSigAddr <= 0x4000000 ) ) { + CurAddr = 0xffffffff - ImcSigAddr + 0x20001; + ReadMEM (CurAddr, AccWidthUint32, &ImcSig); + ReadMEM ((CurAddr + 4), AccWidthUint32, &ImcAddr); + ImcSigAddr <<= 1; + } + + dbIMCChecksume = 0xff; + if ( ImcSig == 0x55aa55aa ) { + // "_AMD_IMC_C" at offset 0x2000 of the binary + ReadMEM ((ImcAddr + 0x2000), AccWidthUint32, &ImcBinSig0); + ReadMEM ((ImcAddr + 0x2004), AccWidthUint32, &ImcBinSig1); + ReadMEM ((ImcAddr + 0x2008), AccWidthUint16, &ImcBinSig2); + if ((ImcBinSig0 == 0x444D415F) && (ImcBinSig1 == 0x434D495F) && (ImcBinSig2 == 0x435F) ) { + dbIMCChecksume = 0; + for ( CurAddr = ImcAddr; CurAddr < ImcAddr + 0x10000; CurAddr++ ) { + ReadMEM (CurAddr, AccWidthUint8, &dbIMC); + dbIMCChecksume = dbIMCChecksume + dbIMC; + } + } + } + if ( dbIMCChecksume ) { + return FALSE; + } else { + return TRUE; + } +} + +/** + * softwareToggleImcStrapping - Software Toggle IMC Firmware Strapping. + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +softwareToggleImcStrapping ( + IN AMDSBCFG* pConfig + ) +{ + UINT8 dbValue; + UINT8 dbPortStatus; + UINT32 abValue; + UINT32 abValue1; + + getChipSysMode (&dbPortStatus); + + ReadPMIO (SB_PMIOA_REGBF, AccWidthUint8, &dbValue); + //if ( (dbValue & (BIT6 + BIT7)) != 0xC0 ) { // PwrGoodOut =1, PwrGoodEnB=1 + //The strapStatus register is not mapped into StrapOveride not in the same bit position. The following is difference. + + //StrapStatus StrapOverride + // bit4 bit17 + // bit6 bit12 + // bit12 bit15 + // bit15 bit16 + // bit16 bit18 + ReadMEM ((ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG80), AccWidthUint32, &abValue); + abValue1 = abValue; + if (abValue & BIT4) { + abValue1 = (abValue1 & ~BIT4) | BIT17; + } + if (abValue & BIT6) { + abValue1 = (abValue1 & ~BIT6) | BIT12; + } + if (abValue & BIT12) { + abValue1 = (abValue1 & ~BIT12) | BIT15; + } + if (abValue & BIT15) { + abValue1 = (abValue1 & ~BIT15) | BIT16; + } + if (abValue & BIT16) { + abValue1 = (abValue1 & ~BIT16) | BIT18; + } + abValue1 |= BIT31; // Overwrite enable + if ((dbPortStatus & ChipSysEcEnable) == 0) { + abValue1 |= BIT2; // bit2- EcEnableStrap + } else { + abValue1 &= ~BIT2; // bit2=0 EcEnableStrap + } + WriteMEM ((ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG84), AccWidthUint32, &abValue1); + dbValue |= BIT6; // PwrGoodOut =1 + dbValue &= ~BIT7; // PwrGoodEnB =0 + WritePMIO (SB_PMIOA_REGBF, AccWidthUint8, &dbValue); + + dbValue = 06; + WriteIO (0xcf9, AccWidthUint8, &dbValue); + SbStall (0xffffffff); +} +#endif + +#ifndef NO_HWM_SUPPORT +/** + * validateImcFirmware - Validate IMC Firmware. + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +hwmInit ( + IN AMDSBCFG* pConfig + ) +{ + RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xB2, AccWidthUint8 | S3_SAVE, 0, 0x55); + RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xB3, AccWidthUint8 | S3_SAVE, 0, 0x55); + RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x91, AccWidthUint8 | S3_SAVE, 0, 0x55); + RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x92, AccWidthUint8 | S3_SAVE, 0, 0x55); + + RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x00, AccWidthUint8 | S3_SAVE, 0, 0x06); + RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x10, AccWidthUint8 | S3_SAVE, 0, 0x06); + RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x20, AccWidthUint8 | S3_SAVE, 0, 0x06); + RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x30, AccWidthUint8 | S3_SAVE, 0, 0x06); + RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x40, AccWidthUint8 | S3_SAVE, 0, 0x06); + + RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x66, AccWidthUint8 | S3_SAVE, 0, 0x01); + RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x6B, AccWidthUint8 | S3_SAVE, 0, 0x01); + RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x70, AccWidthUint8 | S3_SAVE, 0, 0x01); + RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x75, AccWidthUint8 | S3_SAVE, 0, 0x01); + RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x7A, AccWidthUint8 | S3_SAVE, 0, 0x01); + + RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xF8, AccWidthUint8 | S3_SAVE, 0, 0x05); + RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xF9, AccWidthUint8 | S3_SAVE, 0, 0x06); + RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xFF, AccWidthUint8 | S3_SAVE, 0, 0x42); + RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xE9, AccWidthUint8 | S3_SAVE, 0, 0xFF); + RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xEB, AccWidthUint8 | S3_SAVE, 0, 0x1F); + RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xEF, AccWidthUint8 | S3_SAVE, 0, 0x04); + RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xFB, AccWidthUint8 | S3_SAVE, 0, 0x00); +} +#endif diff --git a/src/vendorcode/amd/cimx/sb800/SbDef.h b/src/vendorcode/amd/cimx/sb800/SbDef.h new file mode 100644 index 0000000..79310fd --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/SbDef.h @@ -0,0 +1,261 @@ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + + +//AMD Library Routines (AMDLIB.C) +unsigned char getNumberOfCpuCores (OUT void); +unsigned int readAlink (IN unsigned int Index); +void writeAlink (IN unsigned int Index, IN unsigned int Data); +void rwAlink (IN unsigned int Index, IN unsigned int AndMask, IN unsigned int OrMask); + +//AMD Library Routines (LEGACY.C) +unsigned int GetFixUp (OUT void); + +//AMD Library Routines (IOLIB.C) +void ReadIO (IN unsigned short Address, IN unsigned char OpFlag, IN void *Value); +void WriteIO (IN unsigned short Address, IN unsigned char OpFlag, IN void *Value); +void RWIO (IN unsigned short Address, IN unsigned char OpFlag, IN unsigned int Mask, IN unsigned int Data); + + + +//AMD Library Routines (MEMLIB.C) +void ReadMEM (IN unsigned int Address, IN unsigned char OpFlag, IN void* Value); +void WriteMEM (IN unsigned int Address, IN unsigned char OpFlag, IN void* Value); +void RWMEM (IN unsigned int Address, IN unsigned char OpFlag, IN unsigned int Mask, IN unsigned int Data); + +//AMD Library Routines (PCILIB.C) +void ReadPCI (IN unsigned int Address, IN unsigned char OpFlag, IN void *Value); +void WritePCI (IN unsigned int Address, IN unsigned char OpFlag, IN void *Value); +void RWPCI (IN unsigned int Address, IN unsigned char OpFlag, IN unsigned int Mask, IN unsigned int Data); + +//AMD Library Routines (SBPELIB.C) +/** + * Read Southbridge Revision ID cie Base + * + * + * @retval 0xXXXXXXXX Revision ID + * + */ +unsigned char getRevisionID (OUT void); + +/** + * programPciByteTable - Program PCI register by table (8 bits data) + * + * + * + * @param[in] pPciByteTable - Table data pointer + * @param[in] dwTableSize - Table length + * + */ +void programPciByteTable (IN REG8MASK* pPciByteTable, IN unsigned short dwTableSize); + +/** + * programSbAcpiMmioTbl - Program SB ACPI MMIO register by table (8 bits data) + * + * + * + * @param[in] pAcpiTbl - Table data pointer + * + */ +void programSbAcpiMmioTbl (IN AcpiRegWrite *pAcpiTbl); + +/** + * getChipSysMode - Get Chip status + * + * + * @param[in] Value - Return Chip strap status + * StrapStatus [15.0] - SB800 chip Strap Status + * @li <b>0001</b> - Not USED FWH + * @li <b>0002</b> - Not USED LPC ROM + * @li <b>0004</b> - EC enabled + * @li <b>0008</b> - Reserved + * @li <b>0010</b> - Internal Clock mode + * + */ +void getChipSysMode (IN void* Value); + +/** + * Read Southbridge CIMx configuration structure pointer + * + * + * + * @retval 0xXXXXXXXX CIMx configuration structure pointer. + * + */ +AMDSBCFG* getConfigPointer (OUT void); + +//AMD Library Routines (PMIOLIB.C) +/** + * Read PMIO + * + * + * + * @param[in] Address - PMIO Offset value + * @param[in] OpFlag - Access sizes + * @param[in] Value - Read Data Buffer + * + */ +void ReadPMIO (IN unsigned char Address, IN unsigned char OpFlag, IN void* Value); + +/** + * Write PMIO + * + * + * + * @param[in] Address - PMIO Offset value + * @param[in] OpFlag - Access sizes + * @param[in] Value - Write Data Buffer + * + */ +void WritePMIO (IN unsigned char Address, IN unsigned char OpFlag, IN void* Value); + +/** + * RWPMIO - Read/Write PMIO + * + * + * + * @param[in] Address - PMIO Offset value + * @param[in] OpFlag - Access sizes + * @param[in] AndMask - Data And Mask 32 bits + * @param[in] OrMask - Data OR Mask 32 bits + * + */ +void RWPMIO (IN unsigned char Address, IN unsigned char OpFlag, IN unsigned int AndMask, IN unsigned int OrMask); + +//AMD Library Routines (PMIO2LIB.C) + +/** + * Read PMIO2 + * + * + * + * @param[in] Address - PMIO2 Offset value + * @param[in] OpFlag - Access sizes + * @param[in] Value - Read Data Buffer + * + */ +void ReadPMIO2 (IN unsigned char Address, IN unsigned char OpFlag, IN void* Value); + +/** + * Write PMIO 2 + * + * + * + * @param[in] Address - PMIO2 Offset value + * @param[in] OpFlag - Access sizes + * @param[in] Value - Write Data Buffer + * + */ +void WritePMIO2 (IN unsigned char Address, IN unsigned char OpFlag, IN void* Value); + +/** + * RWPMIO2 - Read/Write PMIO2 + * + * + * + * @param[in] Address - PMIO2 Offset value + * @param[in] OpFlag - Access sizes + * @param[in] AndMask - Data And Mask 32 bits + * @param[in] OrMask - Data OR Mask 32 bits + * + */ +void RWPMIO2 (IN unsigned char Address, IN unsigned char OpFlag, IN unsigned int AndMask, IN unsigned int OrMask); +//AMD Library Routines (ECLIB.C) +// ECLIB Routines + +// #ifndef NO_EC_SUPPORT + +/** + * EnterEcConfig - Force EC into Config mode + * + * + * + * + */ +void EnterEcConfig (void); + +/** + * ExitEcConfig - Force EC exit Config mode + * + * + * + * + */ +void ExitEcConfig (void); + +/** + * ReadEC8 - Read EC register data + * + * + * + * @param[in] Address - EC Register Offset Value + * @param[in] Value - Read Data Buffer + * + */ +void ReadEC8 (IN unsigned char Address, IN unsigned char* Value); + +/** + * WriteEC8 - Write date into EC register + * + * + * + * @param[in] Address - EC Register Offset Value + * @param[in] Value - Write Data Buffer + * + */ +void WriteEC8 (IN unsigned char Address, IN unsigned char* Value); + +/** + * RWEC8 - Read/Write EC register + * + * + * + * @param[in] Address - EC Register Offset Value + * @param[in] AndMask - Data And Mask 8 bits + * @param[in] OrMask - Data OR Mask 8 bits + * + */ +void RWEC8 (IN unsigned char Address, IN unsigned char AndMask, IN unsigned char OrMask); + +/** + * IsZoneFuncEnable - check every zone support function with BitMap from user define + * + */ +unsigned char IsZoneFuncEnable ( unsigned short Flag, unsigned char func, unsigned char Zone); + +void sbECfancontrolservice (IN AMDSBCFG* pConfig); +void SBIMCFanInitializeS3 (void); +void GetSbAcpiMmioBase (OUT unsigned int* AcpiMmioBase); +void GetSbAcpiPmBase (OUT unsigned short* AcpiPmBase); + +// #endif + diff --git a/src/vendorcode/amd/cimx/sb800/SbMain.c b/src/vendorcode/amd/cimx/sb800/SbMain.c new file mode 100644 index 0000000..a494d30 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/SbMain.c @@ -0,0 +1,258 @@ +/** + * @file + * + * SB Initialization. + * + * Init IOAPIC/IOMMU/Misc NB features. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: CIMx-SB + * @e sub-project: + * @e $Revision:$ @e $Date:$ + * + */ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#include "SBPLATFORM.h" +#include "cbtypes.h" + +#ifndef B1_IMAGE + +/*----------------------------------------------------------------------------------------*/ +/** + * sbBeforePciInit - Config Southbridge before PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ + +VOID +sbBeforePciInit ( + IN AMDSBCFG* pConfig + ) +{ + commonInitEarlyBoot (pConfig); + commonInitEarlyPost (pConfig); +#ifndef NO_EC_SUPPORT + ecInitBeforePciEnum (pConfig); +#endif + usbInitBeforePciEnum (pConfig); // USB POST TIME Only + sataInitBeforePciEnum (pConfig); // Init SATA class code and PHY + gecInitBeforePciEnum (pConfig); // Init GEC + azaliaInitBeforePciEnum (pConfig); // Detect and configure High Definition Audio + sbPcieGppEarlyInit (pConfig); // Gpp port init + abSpecialSetBeforePciEnum (pConfig); + usbDesertPll (pConfig); +} + +/** + * sbAfterPciInit - Config Southbridge after PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +sbAfterPciInit ( + IN AMDSBCFG* pConfig + ) +{ + usbInitAfterPciInit (pConfig); // Init USB MMIO + sataInitAfterPciEnum (pConfig); // SATA port enumeration + gecInitAfterPciEnum (pConfig); + azaliaInitAfterPciEnum (pConfig); // Detect and configure High Definition Audio + +#ifndef NO_HWM_SUPPORT + hwmInit (pConfig); +#endif +} + +/** + * sbMidPostInit - Config Southbridge during middle of POST + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +sbMidPostInit ( + IN AMDSBCFG* pConfig + ) +{ + sataInitMidPost (pConfig); +} + +/*----------------------------------------------------------------------------------------*/ +/** + * sbLatePost - Prepare Southbridge to boot to OS. + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +sbLatePost ( + IN AMDSBCFG* pConfig + ) +{ +// UINT16 dwVar; + BUILDPARAM *pStaticOptions; + pStaticOptions = &(pConfig->BuildParameters); + commonInitLateBoot (pConfig); + sataInitLatePost (pConfig); + gecInitLatePost (pConfig); + hpetInit (pConfig, pStaticOptions); // SB Configure HPET base and enable bit +#ifndef NO_EC_SUPPORT + ecInitLatePost (pConfig); +#endif + sbPcieGppLateInit (pConfig); + +} + +/*----------------------------------------------------------------------------------------*/ +/** + * sbBeforePciRestoreInit - Config Southbridge before ACPI S3 resume PCI config device restore + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ + +VOID +sbBeforePciRestoreInit ( + IN AMDSBCFG* pConfig + ) +{ + pConfig->S3Resume = 1; + commonInitEarlyBoot (pConfig); // set /SMBUS/ACPI/IDE/LPC/PCIB + abLinkInitBeforePciEnum (pConfig); // Set ABCFG registers + usbInitBeforePciEnum (pConfig); // USB POST TIME Only + sataInitBeforePciEnum (pConfig); + gecInitBeforePciEnum (pConfig); // Init GEC + azaliaInitBeforePciEnum (pConfig); // Detect and configure High Definition Audio + sbPcieGppEarlyInit (pConfig); // Gpp port init + abSpecialSetBeforePciEnum (pConfig); +} + +/*----------------------------------------------------------------------------------------*/ +/** + * sbAfterPciRestoreInit - Config Southbridge after ACPI S3 resume PCI config device restore + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ + +VOID +sbAfterPciRestoreInit ( + IN AMDSBCFG* pConfig + ) +{ + BUILDPARAM *pStaticOptions; + + pConfig->S3Resume = 1; + + usbSetPllDuringS3 (pConfig); + pStaticOptions = &(pConfig->BuildParameters); + commonInitLateBoot (pConfig); + sataInitAfterPciEnum (pConfig); + gecInitAfterPciEnum (pConfig); + azaliaInitAfterPciEnum (pConfig); // Detect and configure High Definition Audio + hpetInit (pConfig, pStaticOptions); // SB Configure HPET base and enable bit + sataInitLatePost (pConfig); + c3PopupSetting (pConfig); + +#ifndef NO_HWM_SUPPORT + SBIMCFanInitializeS3 (); +#endif +} + +/*----------------------------------------------------------------------------------------*/ +/** + * sbSmmAcpiOn - Config Southbridge during ACPI_ON + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +sbSmmAcpiOn ( + IN AMDSBCFG* pConfig + ) +{ + // Commented the following code since we need to leave the IRQ1/12 filtering enabled always as per latest + // recommendation in RPR. This is required to fix the keyboard stuck issue when playing games under Windows + AMDSBCFG* pTmp; //lx-dummy for /W4 build + pTmp = pConfig; + + // Disable Power Button SMI + RWMEM (ACPI_MMIO_BASE + SMI_BASE + SB_SMI_REGB2, AccWidthUint8, ~(BIT4 + BIT5), 0); + RWMEM (ACPI_MMIO_BASE + SMI_BASE + SB_SMI_REGAC, AccWidthUint8, ~(BIT6 + BIT7), 0); +} + +#endif + +/*----------------------------------------------------------------------------------------*/ +/** + * Call Back routine. + * + * + * + * @param[in] Func Callback ID. + * @param[in] Data Callback specific data. + * @param[in] pConfig Southbridge configuration structure pointer. + */ +UINT32 +CallBackToOEM ( + IN UINT32 Func, + IN UINT32 Data, + IN AMDSBCFG* pConfig + ) +{ + UINT32 Result; + Result = 0; + if ( pConfig->StdHeader.CALLBACK.CalloutPtr == NULL ) return Result; + Result = (pConfig->StdHeader.CALLBACK.CalloutPtr) ( Func, Data, pConfig); + + return Result; +} + + diff --git a/src/vendorcode/amd/cimx/sb800/SbPeLib.c b/src/vendorcode/amd/cimx/sb800/SbPeLib.c new file mode 100644 index 0000000..403f21f --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/SbPeLib.c @@ -0,0 +1,198 @@ +/** + * @file + * + * Southbridge IO access common routine + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: CIMx-SB + * @e sub-project: + * @e $Revision:$ @e $Date:$ + * + */ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#include "SBPLATFORM.h" +#include "cbtypes.h" + +/** + * Read Southbridge Revision ID cie Base + * + * + * @retval 0xXXXXXXXX Revision ID + * + */ +UINT8 +getRevisionID ( + OUT VOID + ) +{ + UINT8 dbVar0; + ReadPCI (((SMBUS_BUS_DEV_FUN << 16) + SB_CFG_REG08), AccWidthUint8, &dbVar0); + return dbVar0; +} + +/*----------------------------------------------------------------------------------------*/ +/** + * programPciByteTable - Program PCI register by table (8 bits data) + * + * + * + * @param[in] pPciByteTable - Table data pointer + * @param[in] dwTableSize - Table length + * + */ +VOID +programPciByteTable ( + IN REG8MASK* pPciByteTable, + IN UINT16 dwTableSize + ) +{ + UINT8 i; + UINT8 dbBusNo; + UINT8 dbDevFnNo; + UINT32 ddBDFR; + + dbBusNo = pPciByteTable->bRegIndex; + dbDevFnNo = pPciByteTable->bANDMask; + pPciByteTable++; + + for ( i = 1; i < dwTableSize; i++ ) { + if ( (pPciByteTable->bRegIndex == 0xFF) && (pPciByteTable->bANDMask == 0xFF) && (pPciByteTable->bORMask == 0xFF) ) { + pPciByteTable++; + dbBusNo = pPciByteTable->bRegIndex; + dbDevFnNo = pPciByteTable->bANDMask; + pPciByteTable++; + i++; + } else { + ddBDFR = (dbBusNo << 24) + (dbDevFnNo << 16) + (pPciByteTable->bRegIndex) ; + RWPCI (ddBDFR, AccWidthUint8 | S3_SAVE, pPciByteTable->bANDMask, pPciByteTable->bORMask); + pPciByteTable++; + } + } +} + +/*----------------------------------------------------------------------------------------*/ +/** + * programSbAcpiMmioTbl - Program SB ACPI MMIO register by table (8 bits data) + * + * + * + * @param[in] pAcpiTbl - Table data pointer + * + */ +VOID +programSbAcpiMmioTbl ( + IN AcpiRegWrite *pAcpiTbl + ) +{ + UINT8 i; + UINT32 ddtempVar; + if (pAcpiTbl != NULL) { + for ( i = 1; pAcpiTbl->MmioBase < 0xf0; i++ ) { + ddtempVar = 0xFED80000 | (pAcpiTbl->MmioBase) << 8 | pAcpiTbl->MmioReg; + RWMEM (ddtempVar, AccWidthUint8, ((pAcpiTbl->DataANDMask) | 0xFFFFFF00), pAcpiTbl->DataOrMask); + pAcpiTbl++; + } + } +} + +/** + * getChipSysMode - Get Chip status + * + * + * @param[in] Value - Return Chip strap status + * StrapStatus [15.0] - SB800 chip Strap Status + * @li <b>0001</b> - Not USED FWH + * @li <b>0002</b> - Not USED LPC ROM + * @li <b>0004</b> - EC enabled + * @li <b>0008</b> - Reserved + * @li <b>0010</b> - Internal Clock mode + * + */ +VOID +getChipSysMode ( + IN VOID* Value + ) +{ + ReadMEM (ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG80, AccWidthUint8, Value); +} + +/*----------------------------------------------------------------------------------------*/ +/** + * Read Southbridge CIMx configuration structure pointer + * + * + * + * @retval 0xXXXXXXXX CIMx configuration structure pointer. + * + */ +AMDSBCFG* +getConfigPointer ( + OUT VOID + ) +{ + UINT8 dbReg; + UINT8 dbValue; + UINT8 i; + UINT32 ddValue; + ddValue = 0; + dbReg = SB_ECMOS_REG08; + + for ( i = 0; i <= 3; i++ ) { + WriteIO (SB_IOMAP_REG72, AccWidthUint8, &dbReg); + ReadIO (SB_IOMAP_REG73, AccWidthUint8, &dbValue); + ddValue |= (dbValue << (i * 8)); + dbReg++; + } + return ( (AMDSBCFG*) (UINTN)ddValue); +} + +/** + * getEfuseStatue - Get Efuse status + * + * + * @param[in] Value - Return Chip strap status + * + */ +VOID +getEfuseStatus ( + IN VOID* Value + ) +{ + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8, AccWidthUint8, ~BIT5, BIT5); + WriteMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGD8, AccWidthUint8, Value); + ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGD8 + 1, AccWidthUint8, Value); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8, AccWidthUint8, ~BIT5, 0); +} diff --git a/src/vendorcode/amd/cimx/sb800/SbPort.c b/src/vendorcode/amd/cimx/sb800/SbPort.c new file mode 100644 index 0000000..048850d --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/SbPort.c @@ -0,0 +1,366 @@ + +/** + * @file + * + * Southbridge Init during POWER-ON + * + * Prepare Southbridge environment during power on stage. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: CIMx-SB + * @e sub-project: + * @e $Revision:$ @e $Date:$ + * + */ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#include "SBPLATFORM.h" +#include "cbtypes.h" +/** + * sbPorInitPciTable - PCI device registers initial during the power on stage. + */ +const static REG8MASK sbPorInitPciTable[] = +{ + // SATA device + {0x00, SATA_BUS_DEV_FUN, 0}, + {SB_SATA_REG84 + 3, ~BIT2, 0}, + {SB_SATA_REG84 + 1, ~(BIT4 + BIT5), BIT4 + BIT5}, + {SB_SATA_REGA0, ~(BIT2 + BIT3 + BIT4 + BIT5 + BIT6), BIT2 + BIT3 + BIT4 + BIT5}, + {0xFF, 0xFF, 0xFF}, + // LPC Device (Bus 0, Dev 20, Func 3) + {0x00, LPC_BUS_DEV_FUN, 0}, + {SB_LPC_REG48, 0x00, BIT0 + BIT1 + BIT2}, + {SB_LPC_REG7C, 0x00, BIT0 + BIT2}, + {SB_LPC_REGBB, 0xFF, BIT3 + BIT4 + BIT5}, + // A12 set 0xBB [5:3] = 111 to improve SPI timing margin. + // A12 Set 0xBA [6:5] = 11 improve SPI timing margin. (SPI Prefetch enhancement) + {SB_LPC_REGBB, 0xBE, BIT0 + BIT3 + BIT4 + BIT5}, + {SB_LPC_REGBA, 0x9F, BIT5 + BIT6}, + {0xFF, 0xFF, 0xFF}, + // P2P Bridge (Bus 0, Dev 20, Func 4) + {0x00, PCIB_BUS_DEV_FUN, 0}, + {SB_PCIB_REG4B, 0xFF, BIT6 + BIT7 + BIT4}, + // Enable IO but not allocate any IO range. This is for post code display on debug port behind P2P bridge. + {SB_PCIB_REG1C, 0x00, 0xF0}, + {SB_PCIB_REG1D, 0x00, 0x00}, + {SB_PCIB_REG04, 0x00, 0x21}, + {SB_PCIB_REG40, 0xDF, 0x20}, + {SB_PCIB_REG50, 0x02, 0x01}, + {0xFF, 0xFF, 0xFF}, +}; + +/** + * sbPmioPorInitTable - Southbridge ACPI MMIO initial during the power on stage. + */ +const static AcpiRegWrite sbPmioPorInitTable[] = +{ + {PMIO_BASE >> 8, SB_PMIOA_REG5D, 0x00, BIT0}, + {PMIO_BASE >> 8, SB_PMIOA_REGD2, 0xCF, BIT4 + BIT5}, + {SMBUS_BASE >> 8, SB_SMBUS_REG12, 0x00, BIT0}, + {PMIO_BASE >> 8, SB_PMIOA_REG28, 0xFF, BIT0}, + {PMIO_BASE >> 8, SB_PMIOA_REG44 + 3, 0x7F, BIT7}, + {PMIO_BASE >> 8, SB_PMIOA_REG48, 0xFF, BIT0}, + {PMIO_BASE >> 8, SB_PMIOA_REG00, 0xFF, 0x0E}, + {PMIO_BASE >> 8, SB_PMIOA_REG00 + 2, 0xFF, 0x40}, + {PMIO_BASE >> 8, SB_PMIOA_REG00 + 3, 0xFF, 0x08}, + {PMIO_BASE >> 8, SB_PMIOA_REG34, 0xEF, BIT0 + BIT1}, + {PMIO_BASE >> 8, SB_PMIOA_REGEC, 0xFD, BIT1}, + {PMIO_BASE >> 8, SB_PMIOA_REG5B, 0xF9, BIT1 + BIT2}, + {PMIO_BASE >> 8, SB_PMIOA_REG08, 0xFE, BIT2 + BIT4}, + {PMIO_BASE >> 8, SB_PMIOA_REG08 + 1, 0xFF, BIT0}, + {PMIO_BASE >> 8, SB_PMIOA_REG54, 0x00, BIT4 + BIT7}, + {PMIO_BASE >> 8, SB_PMIOA_REG04 + 3, 0xFD, BIT1}, + {PMIO_BASE >> 8, SB_PMIOA_REG74, 0xF6, BIT0 + BIT3}, + {PMIO_BASE >> 8, SB_PMIOA_REGF0, ~BIT2, 0x00}, + // RPR GEC I/O Termination Setting + // PM_Reg 0xF6 = Power-on default setting + // PM_Reg 0xF7 = Power-on default setting + // PM_Reg 0xF8 = 0x6C + // PM_Reg 0xF9 = 0x21 + // PM_Reg 0xFA = 0x00 SB800 A12 GEC I/O Pad settings for 3.3V CMOS + {PMIO_BASE >> 8, SB_PMIOA_REGF8, 0x00, 0x6C}, + {PMIO_BASE >> 8, SB_PMIOA_REGF8 + 1, 0x00, 0x27}, + {PMIO_BASE >> 8, SB_PMIOA_REGF8 + 2, 0x00, 0x00}, + {PMIO_BASE >> 8, SB_PMIOA_REGC4, 0xFE, 0x14}, + {PMIO_BASE >> 8, SB_PMIOA_REGC0 + 2, 0xBF, 0x40}, + + {PMIO_BASE >> 8, SB_PMIOA_REGBE, 0xDF, BIT5},//ENH210907 SB800: request to no longer clear kb_pcirst_en (bit 1) of PM_Reg BEh per the RPR + + {0xFF, 0xFF, 0xFF, 0xFF}, +}; + +/** + * sbPowerOnInit - Config Southbridge during power on stage. + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +sbPowerOnInit ( + IN AMDSBCFG* pConfig + ) +{ + + UINT8 dbPortStatus; + UINT8 dbSysConfig; + UINT32 abValue; + UINT8 dbValue; + UINT8 dbEfuse; + UINT8 dbCg2WR; + UINT8 dbCg1Pll; + UINT8 cimNbSbGen2; + UINT8 cimSataMode; + UINT8 cimSpiFastReadEnable; + UINT8 cimSpiFastReadSpeed; + UINT8 cimSioHwmPortEnable; + UINT8 SataPortNum; + + cimNbSbGen2 = pConfig->NbSbGen2; + cimSataMode = pConfig->SATAMODE.SataModeReg; +// Adding Fast Read Function support + if (pConfig->BuildParameters.SpiFastReadEnable != 0 ) { + cimSpiFastReadEnable = (UINT8) pConfig->BuildParameters.SpiFastReadEnable; + } else { + cimSpiFastReadEnable = cimSpiFastReadEnableDefault; + } + cimSpiFastReadSpeed = (UINT8) pConfig->BuildParameters.SpiFastReadSpeed; + cimSioHwmPortEnable = pConfig->SioHwmPortEnable; +#if SB_CIMx_PARAMETER == 0 + cimNbSbGen2 = cimNbSbGen2Default; + cimSataMode = (UINT8) ((cimSataMode & 0xFB) | cimSataSetMaxGen2Default); + cimSataMode = (UINT8) ((cimSataMode & 0x0F) | (cimSATARefClkSelDefault + cimSATARefDivSelDefault)); + cimSpiFastReadEnable = cimSpiFastReadEnableDefault; + cimSpiFastReadSpeed = cimSpiFastReadSpeedDefault; + cimSioHwmPortEnable = cimSioHwmPortEnableDefault; +#endif + +// SB800 Only Enabled (Mmio_mem_enablr) // Default value is correct + RWPMIO (SB_PMIOA_REG24, AccWidthUint8, 0xFF, BIT0); + +// Set A-Link bridge access address. This address is set at device 14h, function 0, +// register 0f0h. This is an I/O address. The I/O address must be on 16-byte boundary. + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGE0, AccWidthUint32, 00, ALINK_ACCESS_INDEX); + writeAlink (0x80000004, 0x04); // RPR 4.2 Enable SB800 to issue memory read/write requests in the upstream direction + abValue = readAlink (SB_ABCFG_REG9C | (UINT32) (ABCFG << 29)); // RPR 4.5 Disable the credit variable in the downstream arbitration equation + abValue = abValue | BIT0; + writeAlink (SB_ABCFG_REG9C | (UINT32) (ABCFG << 29), abValue); + writeAlink (0x30, 0x10); // AXINDC 0x10[9]=1, Enabling Non-Posted memory write for K8 platform. + writeAlink (0x34, readAlink (0x34) | BIT9); + + dbEfuse = FUSE_ID_EFUSE_LOC; + getEfuseStatus (&dbEfuse); + if ( dbEfuse == M1_D1_FUSE_ID ) { + dbEfuse = MINOR_ID_EFUSE_LOC; + getEfuseStatus (&dbEfuse); + if ( dbEfuse == M1_MINOR_ID ) { + // Limit ALink speed to 2.5G if Hudson-M1 + cimNbSbGen2 = 0; + } + } +// Step 1: +// AXINDP_Reg 0xA4[0] = 0x1 +// Step 2: +// AXCFG_Reg 0x88[3:0] = 0x2 +// Step3: +// AXINDP_Reg 0xA4[18] = 0x1 + if ( cimNbSbGen2 == TRUE ) { + rwAlink (SB_AX_INDXP_REGA4, 0xFFFFFFFF, BIT0); + rwAlink ((UINT32)SB_AX_CFG_REG88, 0xFFFFFFF0, 0x2); + rwAlink (SB_AX_INDXP_REGA4, 0xFFFFFFFF, BIT18); + } + +// Set Build option into SB + WritePCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG64, AccWidthUint16 | S3_SAVE, &(pConfig->BuildParameters.SioPmeBaseAddress)); + if (cimSioHwmPortEnable) { + // Use Wide IO Port 1 to provide access to the superio HWM registers. + WritePCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG66 , AccWidthUint16 | S3_SAVE, &(pConfig->BuildParameters.SioHwmBaseAddress)); + RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG48 + 3, AccWidthUint8 | S3_SAVE, 0xFF, BIT0); // Wide IO Port 1: enable + RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG74 , AccWidthUint8 | S3_SAVE, 0xFF, BIT2); // set width 0:512, 1:16 bytes + } + RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA0, AccWidthUint32 | S3_SAVE, 0x001F, (pConfig->BuildParameters.SpiRomBaseAddress)); + RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG9C, AccWidthUint32 | S3_SAVE, 0, (pConfig->BuildParameters.GecShadowRomBase + 1)); +// Enabled SMBUS0/SMBUS1 (ASF) Base Address + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG2C, AccWidthUint16, 06, (pConfig->BuildParameters.Smbus0BaseAddress) + BIT0); //protect BIT[2:1] + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG28, AccWidthUint16, 00, (pConfig->BuildParameters.Smbus1BaseAddress)); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG60, AccWidthUint16, 00, (pConfig->BuildParameters.AcpiPm1EvtBlkAddr)); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG62, AccWidthUint16, 00, (pConfig->BuildParameters.AcpiPm1CntBlkAddr)); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG64, AccWidthUint16, 00, (pConfig->BuildParameters.AcpiPmTmrBlkAddr)); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG66, AccWidthUint16, 00, (pConfig->BuildParameters.CpuControlBlkAddr)); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG68, AccWidthUint16, 00, (pConfig->BuildParameters.AcpiGpe0BlkAddr)); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG6A, AccWidthUint16, 00, (pConfig->BuildParameters.SmiCmdPortAddr)); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG6C, AccWidthUint16, 00, (pConfig->BuildParameters.AcpiPmaCntBlkAddr)); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG6E, AccWidthUint16, 00, (pConfig->BuildParameters.SmiCmdPortAddr) + 8); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG48, AccWidthUint32, 00, (pConfig->BuildParameters.WatchDogTimerBase)); + + dbEfuse = SATA_FIS_BASE_EFUSE_LOC; + getEfuseStatus (&dbEfuse); + + programSbAcpiMmioTbl ((AcpiRegWrite*) FIXUP_PTR (&sbPmioPorInitTable[0])); + + + SataPortNum = 0; + for ( SataPortNum = 0; SataPortNum < 0x06; SataPortNum++ ) { + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8, 0xFF, 1 << SataPortNum); + SbStall (2); + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8, (0xFF ^ (1 << SataPortNum)) , 0x00); + SbStall (2); + } + + + //The following bits must be set before enabling SPI prefetch. + // Set SPI MMio bit offset 00h[19] to 1 and offset 00h[26:24] to 111, offset 0ch[21:16] to 1, Set LPC cfg BBh[6] to 0 ( by default it is 0). + // if Ec is enable + // Maximum spi speed that can be supported by SB is 22M (SPI Mmio offset 0ch[13:12] to 10) if the rom can run at the speed. + // else + // Maximum spi speed that can be supported by SB is 33M (SPI Mmio offset 0ch[13:12] to 01 in normal mode or offset 0ch[15:14] in fast mode) if the rom can run at + // the speed. + getChipSysMode (&dbSysConfig); + if (pConfig->BuildParameters.SpiSpeed < 0x02) { + pConfig->BuildParameters.SpiSpeed = 0x01; + if (dbSysConfig & ChipSysEcEnable) pConfig->BuildParameters.SpiSpeed = 0x02; + } + + if (pConfig->SbSpiSpeedSupport) { + RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG00, AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, (BIT19 + BIT24 + BIT25 + BIT26)); + RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG0C, AccWidthUint32 | S3_SAVE, 0xFFC0FFFF, 1 << 16 ); + RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG0C, AccWidthUint16 | S3_SAVE, ~(BIT13 + BIT12), (pConfig->BuildParameters.SpiSpeed << 12)); + } + // SPI Fast Read Function + if ( cimSpiFastReadEnable ) { + RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG00, AccWidthUint32 | S3_SAVE, 0xFFFBFFFF, BIT18); + } else { + RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG00, AccWidthUint32 | S3_SAVE, 0xFFFBFFFF, 0x00); + } + + if ( cimSpiFastReadSpeed ) { + RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG0C, AccWidthUint16 | S3_SAVE, ~(BIT15 + BIT14), ( cimSpiFastReadSpeed << 14)); + } + //Program power on pci init table + programPciByteTable ( (REG8MASK*) FIXUP_PTR (&sbPorInitPciTable[0]), sizeof (sbPorInitPciTable) / sizeof (REG8MASK) ); + + programSbAcpiMmioTbl ((AcpiRegWrite *) (pConfig->OEMPROGTBL.OemProgrammingTablePtr_Ptr)); + + dbValue = 0x0A; + WriteIO (SB_IOMAP_REG70, AccWidthUint8, &dbValue); + ReadIO (SB_IOMAP_REG71, AccWidthUint8, &dbValue); + dbValue &= 0xEF; + WriteIO (SB_IOMAP_REG71, AccWidthUint8, &dbValue); + +// Change the CG PLL multiplier to x1.1 + if ( pConfig->UsbRxMode !=0 ) { + dbCg2WR = 0x00; + dbCg1Pll = 0x3A; + ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8, AccWidthUint8, &dbCg2WR); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGD8, AccWidthUint8, 0, 0x3A); + ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGD9, AccWidthUint8, &dbCg1Pll); + dbCg2WR &= BIT4; + if (( dbCg2WR == 0x00 ) && ( dbCg1Pll !=0x10 )) + { + RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x18, AccWidthUint8, 0xE1, 0x10); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGD8, AccWidthUint8, 0, 0x3A); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGD9, AccWidthUint8, 0, USB_PLL_Voltage); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8, AccWidthUint8, 0xEF, 0x10); + dbValue = 0x06; + WriteIO (0xCF9, AccWidthUint8, &dbValue); + } else { + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8, AccWidthUint8, 0xEF, 0x00); + } + } + + RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG6C, AccWidthUint32 | S3_SAVE, ~(pConfig->BuildParameters.BiosSize << 4), 0); + + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGDA, AccWidthUint8, 0, (pConfig->SATAMODE.SataModeReg) & 0xFD ); + + if (dbEfuse & BIT0) { + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGDA, AccWidthUint8, 0xFB, 0x04); + } + + ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGDA, AccWidthUint8, &dbPortStatus); + if ( ((dbPortStatus & 0xF0) == 0x10) ) { + RWMEM (ACPI_MMIO_BASE + MISC_BASE + SB_PMIOA_REG08, AccWidthUint8, 0, BIT5); + } + + if ( pConfig->BuildParameters.LegacyFree ) { + RWPCI (((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG44), AccWidthUint32 | S3_SAVE, 00, 0x0003C000); + } else { + RWPCI (((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG44), AccWidthUint32 | S3_SAVE, 00, 0xFF03FFD5); + } + + dbValue = 0x09; + WriteIO (SB_IOMAP_REGC00, AccWidthUint8, &dbValue); + ReadIO (SB_IOMAP_REGC01, AccWidthUint8, &dbValue); + if ( !pConfig->BuildParameters.EcKbd ) { + // Route SIO IRQ1/IRQ12 to USB IRQ1/IRQ12 input + dbValue = dbValue & 0xF9; + } + if ( pConfig->BuildParameters.LegacyFree ) { + // Disable IRQ1/IRQ12 filter enable for Legacy free with USB KBC emulation. + dbValue = dbValue & 0x9F; + } + // Enabled IRQ input + dbValue = dbValue | BIT4; + WriteIO (SB_IOMAP_REGC01, AccWidthUint8, &dbValue); + +#ifndef NO_EC_SUPPORT + getChipSysMode (&dbPortStatus); + if ( ((dbPortStatus & ChipSysEcEnable) == 0x00) ) { + // EC is disabled by jumper setting or board config + RWPCI (((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4), AccWidthUint16 | S3_SAVE, 0xFFFE, BIT0); + } else { + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC4, AccWidthUint8, 0xF7, 0x08); + ecPowerOnInit ( pConfig); + } +#endif + + ReadMEM (ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG80, AccWidthUint8, &dbValue); + if (dbValue & ChipSysIntClkGen) { + ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC4, AccWidthUint8, &dbValue); + if (dbValue & BIT2) { + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC0 + 2, AccWidthUint8, 0xDF, 0x20); + } else { + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC4, AccWidthUint8, 0xFB, 0x40); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC0 + 2, AccWidthUint8, 0xDF, 0x20); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC4, AccWidthUint8, 0xFB, 0x00); + } + } + + // Restore GPP clock to on as it may be off during last POST when some device was disabled; + // the device can't be detected if enabled again as the values retain on S5 and warm reset. + RWMEM (ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG00, AccWidthUint32, 0xFFFFFFFF, 0xFFFFFFFF); + RWMEM (ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG04, AccWidthUint8, 0xFF, 0xFF); + + // Set PMx88[5]to enable LdtStp# output to do the C3 or FidVid transation + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG88, AccWidthUint8, 0xFF, BIT5); +} diff --git a/src/vendorcode/amd/cimx/sb800/SbSubFun.h b/src/vendorcode/amd/cimx/sb800/SbSubFun.h new file mode 100644 index 0000000..6b8c8d4 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/SbSubFun.h @@ -0,0 +1,523 @@ +/** + * @file + * + * Southbridge CIMx Function Support Define (All) + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: CIMx-SB + * @e sub-project: + * @e $Revision:$ @e $Date:$ + * + */ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +// Southbridge SBMAIN Routines + +/** + * Southbridge Main Function Public Function + * + */ + +/** + * sbBeforePciInit - Config Southbridge before PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void sbBeforePciInit (IN AMDSBCFG* pConfig); + + +/** + * sbAfterPciInit - Config Southbridge after PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void sbAfterPciInit (IN AMDSBCFG* pConfig); + +/** + * sbMidPostInit - Config Southbridge during middle of POST + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void sbMidPostInit (IN AMDSBCFG* pConfig); + +/** + * sbLatePost - Prepare Southbridge to boot to OS. + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void sbLatePost (IN AMDSBCFG* pConfig); + +/** + * sbBeforePciRestoreInit - Config Southbridge before ACPI S3 resume PCI config device restore + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void sbBeforePciRestoreInit (IN AMDSBCFG* pConfig); + +/** + * sbAfterPciRestoreInit - Config Southbridge after ACPI S3 resume PCI config device restore + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void sbAfterPciRestoreInit (IN AMDSBCFG* pConfig); + +/** + * sbSmmAcpiOn - Config Southbridge during ACPI_ON + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void sbSmmAcpiOn (IN AMDSBCFG* pConfig); + +/** + * CallBackToOEM - Call Back routine. + * + * + * + * @param[in] Func Callback ID. + * @param[in] Data Callback specific data. + * @param[in] pConfig Southbridge configuration structure pointer. + */ +unsigned int CallBackToOEM (IN unsigned int Func, IN unsigned int Data, IN AMDSBCFG* pConfig); + + +// Southbridge SBPOR Routines + +/** + * Southbridge power-on initial Public Function + * + */ + +/** + * sbPowerOnInit - Config Southbridge during power on stage. + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void sbPowerOnInit (IN AMDSBCFG* pConfig); + + +// Southbridge Common Routines + +/** + * Southbridge Common Public Function + * + */ + +/** + * commonInitEarlyBoot - Config Southbridge SMBUS/ACPI/IDE/LPC/PCIB. + * + * This settings should be done during S3 resume also + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void commonInitEarlyBoot (IN AMDSBCFG* pConfig); + +/** + * commonInitEarlyPost - Config Southbridge SMBUS/ACPI/IDE/LPC/PCIB. + * + * This settings might not program during S3 resume + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void commonInitEarlyPost (IN AMDSBCFG* pConfig); + +/** + * commonInitLateBoot - Prepare Southbridge register setting to boot to OS. + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void commonInitLateBoot (IN AMDSBCFG* pConfig); + +/** + * abSpecialSetBeforePciEnum - Special setting ABCFG registers before PCI emulation. + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void abSpecialSetBeforePciEnum (IN AMDSBCFG* pConfig); + +void usbSetPllDuringS3 (IN AMDSBCFG* pConfig); +void usbDesertPll (IN AMDSBCFG* pConfig); + +/** + * hpetInit - Program Southbridge HPET function + * + * ** Eric + * + * @param[in] pConfig Southbridge configuration structure pointer. + * @param[in] pStaticOptions Platform build configuration table. + * + */ +void hpetInit (IN AMDSBCFG* pConfig, IN BUILDPARAM *pStaticOptions); + +/** + * c3PopupSetting - Program Southbridge C state function + * + * ** Eric + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void c3PopupSetting (IN AMDSBCFG* pConfig); + +/** + * FusionRelatedSetting - Program Fusion C related function + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void FusionRelatedSetting (IN AMDSBCFG* pConfig); + +/** + * Southbridge Common Private Function + * + */ + +/** + * abLinkInitBeforePciEnum - Set ABCFG registers before PCI emulation. + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void abLinkInitBeforePciEnum (IN AMDSBCFG* pConfig); + +// Southbridge SATA Routines + +/** + * Southbridge SATA Controller Public Function + * + */ + +/** + * sataInitMidPost - Config SATA controller in Middle POST. + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void sataInitMidPost (IN AMDSBCFG* pConfig); + +/** + * sataInitAfterPciEnum - Config SATA controller after PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void sataInitAfterPciEnum (IN AMDSBCFG* pConfig); + +/** + * sataInitBeforePciEnum - Config SATA controller before PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void sataInitBeforePciEnum (IN AMDSBCFG* pConfig); + +/** + * sataInitLatePost - Prepare SATA controller to boot to OS. + * + * - Set class ID to AHCI (if set to AHCI * Mode) + * - Enable AHCI interrupt + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void sataInitLatePost (IN AMDSBCFG* pConfig); + +// Southbridge GEC Routines + +/** + * Southbridge GEC Controller Public Function + * + */ + +/** + * gecInitBeforePciEnum - Config GEC controller before PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void gecInitBeforePciEnum (IN AMDSBCFG* pConfig); + +/** + * gecInitAfterPciEnum - Config GEC controller after PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void gecInitAfterPciEnum (IN AMDSBCFG* pConfig); + +/** + * gecInitLatePost - Prepare GEC controller to boot to OS. + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void gecInitLatePost (IN AMDSBCFG* pConfig); + +// Southbridge USB Routines + +/** + * Southbridge USB Controller Public Function + * + */ + +/** + * Config USB controller before PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void usbInitBeforePciEnum (IN AMDSBCFG* pConfig); + +/** + * Config USB controller after PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void usbInitAfterPciInit (IN AMDSBCFG* pConfig); + +/** + * Config USB1 EHCI controller after PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void usb1EhciInitAfterPciInit (IN AMDSBCFG* pConfig); +void usb2EhciInitAfterPciInit (IN AMDSBCFG* pConfig); +void usb3EhciInitAfterPciInit (IN AMDSBCFG* pConfig); +void usb1OhciInitAfterPciInit (IN AMDSBCFG* pConfig); +void usb2OhciInitAfterPciInit (IN AMDSBCFG* pConfig); +void usb3OhciInitAfterPciInit (IN AMDSBCFG* pConfig); +void usb4OhciInitAfterPciInit (IN AMDSBCFG* pConfig); + +// Southbridge SMI Service Routines (SMM.C) + +/** + * Southbridge SMI Service Routines Public Function + * + */ + +/** + * Southbridge SMI service module + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void sbSmmService (IN AMDSBCFG* pConfig); + +/** + * softwareSMIservice - Software SMI service + * + * ** Eric + * + * @param[in] void Southbridge software SMI service ID. + * + */ +void softwareSMIservice (IN void); + +// Southbridge GPP Controller Routines + +/** + * Southbridge GPP Controller Routines Public Function + * + */ + +/** + * GPP early programming and link training. On exit all populated EPs should be fully operational. + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void sbPcieGppEarlyInit (IN AMDSBCFG* pConfig); + +/** + * sbPcieGppLateInit - Late PCIE initialization for SB800 GPP component + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void sbPcieGppLateInit (IN AMDSBCFG* pConfig); + +// Southbridge HD Controller Routines (AZALIA.C) + +/** + * Southbridge HD Controller Routines (AZALIA.C) Public Function + * + */ + +/** + * Config HD Audio Before PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void azaliaInitBeforePciEnum (IN AMDSBCFG* pConfig); + +/** + * Config HD Audio after PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +void azaliaInitAfterPciEnum (IN AMDSBCFG* pConfig); + + +// Southbridge EC Routines + +#ifndef NO_EC_SUPPORT +/** + * Southbridge EC Controller Public Function + * + */ + +/** + * Config EC controller during power-on + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ + void ecPowerOnInit (IN AMDSBCFG* pConfig); + +/** + * Config EC controller before PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ + void ecInitBeforePciEnum (IN AMDSBCFG* pConfig); + +/** + * Prepare EC controller to boot to OS. + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ + void ecInitLatePost (IN AMDSBCFG* pConfig); + +/** + * validateImcFirmware - Validate IMC Firmware. + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + * @retval TRUE Pass + * @retval FALSE Failed + */ + unsigned char validateImcFirmware (IN AMDSBCFG* pConfig); + +/** + * validateImcFirmware - Validate IMC Firmware. + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ + void softwareToggleImcStrapping (IN AMDSBCFG* pConfig); +#endif + +#ifndef NO_HWM_SUPPORT +/** + * validateImcFirmware - Validate IMC Firmware. + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ + void hwmInit (IN AMDSBCFG* pConfig); +#endif + diff --git a/src/vendorcode/amd/cimx/sb800/SbType.h b/src/vendorcode/amd/cimx/sb800/SbType.h new file mode 100644 index 0000000..b897950 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/SbType.h @@ -0,0 +1,1135 @@ + +/** + * @file + * + * Southbridge CIMx configuration structure define + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: CIMx-SB + * @e sub-project: + * @e $Revision:$ @e $Date:$ + * + */ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#ifndef _AMD_SBTYPE_H_ +#define _AMD_SBTYPE_H_ + +#pragma pack (push, 1) + +/** + * Entry point of Southbridge CIMx + * + * + * @param[in] Param1 Southbridge CIMx Function ID. + * @param[in] Param2 Southbridge Input Data. + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +typedef unsigned int (*SBCIM_HOOK_ENTRY) (unsigned int Param1, unsigned int Param2, void* pConfig); +/** + * SMM_SERVICE_ROUTINE - Southbridge SMI service routine + * + */ +typedef void (*SMM_SERVICE_ROUTINE) (void); + + +/** + * The STATIC platform information for CIMx Module. + * + */ +typedef struct _BUILDPARAM { + unsigned int BiosSize:3; /**< BiosSize + * @par + * BIOSSize [2.0] - BIOS Image Size + * @li <b>0</b> - 1M + * @li <b>1</b> - 2M + * @li <b>3</b> - 4M + * @li <b>7</b> - 8M + * In SB800, default ROM size is 1M Bytes, if your platform ROM bigger then 1M + * you have to set the ROM size outside CIMx module and before AGESA module get call + * + */ + unsigned int LegacyFree:1; /**< LegacyFree + * @par + * Config Southbridge CIMx module for Legacy Free Mode + */ + unsigned int SpiSpeed:2; /**< SpiSpeed + * @par + * SPI Speed [1.0] - the clock speed for non-fast read command + * @li <b>00</b> - 66Mhz + * @li <b>01</b> - 33Mhz + * @li <b>10</b> - 22Mhz + * @li <b>11</b> - 16.5Mhz + * + */ + unsigned int ImcEnableOverWrite:2; /**< ImcEnableOverWrite + * @par + * Imc Enable OverWrite + * @li <b>00</b> - by default strapping + * @li <b>01</b> - On + * @li <b>10</b> - Off + * + */ + unsigned int SpiFastReadEnable:1; /**< SpiFastReadEnable + * @par + * @li <b>00</b> - Disable SPI Fast Read Function + * @li <b>01</b> - Enable SPI Fast Read Function + */ + unsigned int SpiFastReadSpeed:2; /**< SpiFastReadSpeed + * @par + * @li <b>00</b> - 66Mhz + * @li <b>01</b> - 33Mhz + * @li <b>10</b> - 22Mhz + * @li <b>11</b> - 16.5Mhz + */ + unsigned int SpreadSpectrumType:1; /**< SpreadSpectrumType + * @par + * @li <b>0</b> - Spread Spectrum for normal platform + * @li <b>1</b> - Spread Spectrum for Ontario platform + */ +/** Dummy0 - Reserved */ + unsigned int Dummy0:4; + unsigned int EcKbd:1; /**< EcKbd + * @par + * EcKbd [16] - Platform use EC (as SIO) or SIO chip for PS/2 Keyboard and Mouse + * @li <b>0</b> - Use SIO PS/2 function. + * @li <b>1</b> - Use EC PS/2 function instead of SIO PS/2 function. ** + * @li <b>**</b> When set 1, EC function have to enable, otherwise, CIMx treat as legacy-free system. + */ +/** EcChannel0 - Reserved */ + unsigned int EcChannel0:1; +/** UsbMsi - Reserved */ + unsigned int UsbMsi:1; +/** HdAudioMsi - Reserved */ + unsigned int HdAudioMsi:1; +/** LpcMsi - Reserved */ + unsigned int LpcMsi:1; +/** PcibMsi - Reserved */ + unsigned int PcibMsi:1; +/** AbMsi - Reserved */ + unsigned int AbMsi:1; +/** Dummy1 - Reserved */ + unsigned int Dummy1:9; + + unsigned int Smbus0BaseAddress; /**< Smbus0BaseAddress + * @par + * Smbus BASE Address + */ + unsigned int Smbus1BaseAddress; /**< Smbus1BaseAddress + * @par + * Smbus1 (ASF) BASE Address + */ + unsigned int SioPmeBaseAddress; /**< SioPmeBaseAddress + * @par + * SIO PME BASE Address + */ + unsigned int SioHwmBaseAddress; /**< SioHwmBaseAddress + * @par + * SIO HWM BASE Address + */ + unsigned int WatchDogTimerBase; /**< WatchDogTimerBase + * @par + * Watch Dog Timer Address + */ + unsigned int GecShadowRomBase; /**< GecShadowRomBase + * @par + * GEC (NIC) SHADOWROM BASE Address + */ + unsigned int SpiRomBaseAddress; /**< SpiRomBaseAddress + * @par + * SPI ROM BASE Address + */ + unsigned short AcpiPm1EvtBlkAddr; /**< AcpiPm1EvtBlkAddr + * @par + * ACPI PM1 event block Address + */ + unsigned short AcpiPm1CntBlkAddr; /**< AcpiPm1CntBlkAddr + * @par + * ACPI PM1 Control block Address + */ + unsigned short AcpiPmTmrBlkAddr; /**< AcpiPmTmrBlkAddr + * @par + * ACPI PM timer block Address + */ + unsigned short CpuControlBlkAddr; /**< CpuControlBlkAddr + * @par + * ACPI CPU control block Address + */ + unsigned short AcpiGpe0BlkAddr; /**< AcpiGpe0BlkAddr + * @par + * ACPI GPE0 block Address + */ + unsigned short SmiCmdPortAddr; /**< SmiCmdPortAddr + * @par + * SMI command port Address + */ + unsigned short AcpiPmaCntBlkAddr; /**< AcpiPmaCntBlkAddr + * @par + * ACPI PMA Control block Address + */ + unsigned int HpetBase; /**< HpetBase + * @par + * HPET Base address + */ + unsigned int SataIDESsid; /**< SataIDESsid + * @par + * SATA IDE mode SSID + */ + unsigned int SataRAIDSsid; /**< SataRAIDSsid + * @par + * SATA RAID mode SSID + */ + unsigned int SataRAID5Ssid; /**< SataRAID5Ssid + * @par + * SATA RAID5 mode SSID + */ + unsigned int SataAHCISsid; /**< SataAHCISsid + * @par + * SATA AHCI mode SSID + */ + unsigned int OhciSsid; /**< OhciSsid + * @par + * OHCI Controller SSID + */ + unsigned int EhciSsid; /**< EhciSsid + * @par + * EHCI Controller SSID + */ + unsigned int Ohci4Ssid; /**< Ohci4Ssid + * @par + * OHCI4 Controller SSID (Force USB 1.1 mode) + */ + unsigned int SmbusSsid; /**< SmbusSsid + * @par + * SMBUS controller SSID + */ + unsigned int IdeSsid; /**< IdeSsid + * @par + * IDE (Sata) controller SSID + */ + unsigned int AzaliaSsid; /**< AzaliaSsid + * @par + * HD Audio controller SSID + */ + unsigned int LpcSsid; /**< LpcSsid + * @par + * LPC controller SSID + */ + unsigned int PCIBSsid; /**< PCIBSsid + * @par + * PCIB controller SSID + */ +} BUILDPARAM; + +/** + * The EC fan MSGREG struct for CIMx Module. * + */ +typedef struct _EC_struct { + unsigned char MSGFun81zone0MSGREG0; ///<Thermal zone + unsigned char MSGFun81zone0MSGREG1; ///<Thermal zone + unsigned char MSGFun81zone0MSGREG2; ///<Thermal zone control byte 1 + unsigned char MSGFun81zone0MSGREG3; ///<Thermal zone control byte 2 + unsigned char MSGFun81zone0MSGREG4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius. + unsigned char MSGFun81zone0MSGREG5; ///<Hysteresis inforamtion + unsigned char MSGFun81zone0MSGREG6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 + unsigned char MSGFun81zone0MSGREG7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located. + unsigned char MSGFun81zone0MSGREG8; ///< @todo Style_Analyzer: Add Doxygen comments to struct entry + unsigned char MSGFun81zone0MSGREG9; ///< @todo Style_Analyzer: Add Doxygen comments to struct entry + + //EC LDN9 funtion 81 zone 1 + unsigned char MSGFun81zone1MSGREG0; ///<Thermal zone + unsigned char MSGFun81zone1MSGREG1; ///<Thermal zone + unsigned char MSGFun81zone1MSGREG2; ///<Thermal zone control byte 1 + unsigned char MSGFun81zone1MSGREG3; ///<Thermal zone control byte 2 + unsigned char MSGFun81zone1MSGREG4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius. + unsigned char MSGFun81zone1MSGREG5; ///<Hysteresis inforamtion + unsigned char MSGFun81zone1MSGREG6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 + unsigned char MSGFun81zone1MSGREG7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located. + unsigned char MSGFun81zone1MSGREG8; ///< @todo Style_Analyzer: Add Doxygen comments to struct entry + unsigned char MSGFun81zone1MSGREG9; ///< @todo Style_Analyzer: Add Doxygen comments to struct entry + + //EC LDN9 funtion 81 zone 2 + unsigned char MSGFun81zone2MSGREG0; ///<Thermal zone + unsigned char MSGFun81zone2MSGREG1; ///<Thermal zone + unsigned char MSGFun81zone2MSGREG2; ///<Thermal zone control byte 1 + unsigned char MSGFun81zone2MSGREG3; ///<Thermal zone control byte 2 + unsigned char MSGFun81zone2MSGREG4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius. + unsigned char MSGFun81zone2MSGREG5; ///<Hysteresis inforamtion + unsigned char MSGFun81zone2MSGREG6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 + unsigned char MSGFun81zone2MSGREG7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located. + unsigned char MSGFun81zone2MSGREG8; ///< @todo Style_Analyzer: Add Doxygen comments to struct entry + unsigned char MSGFun81zone2MSGREG9; ///< @todo Style_Analyzer: Add Doxygen comments to struct entry + + //EC LDN9 funtion 81 zone 3 + unsigned char MSGFun81zone3MSGREG0; ///<Thermal zone + unsigned char MSGFun81zone3MSGREG1; ///<Thermal zone + unsigned char MSGFun81zone3MSGREG2; ///<Thermal zone control byte 1 + unsigned char MSGFun81zone3MSGREG3; ///<Thermal zone control byte 2 + unsigned char MSGFun81zone3MSGREG4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius. + unsigned char MSGFun81zone3MSGREG5; ///<Hysteresis inforamtion + unsigned char MSGFun81zone3MSGREG6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 + unsigned char MSGFun81zone3MSGREG7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located. + unsigned char MSGFun81zone3MSGREG8; ///< @todo Style_Analyzer: Add Doxygen comments to struct entry + unsigned char MSGFun81zone3MSGREG9; ///< @todo Style_Analyzer: Add Doxygen comments to struct entry + + //EC LDN9 funtion 83 zone 0 + unsigned char MSGFun83zone0MSGREG0; ///<Thermal zone + unsigned char MSGFun83zone0MSGREG1; ///<Thermal zone + unsigned char MSGFun83zone0MSGREG2; ///<_AC0 + unsigned char MSGFun83zone0MSGREG3; ///<_AC1 + unsigned char MSGFun83zone0MSGREG4; ///<_AC2 + unsigned char MSGFun83zone0MSGREG5; ///<_AC3 + unsigned char MSGFun83zone0MSGREG6; ///<_AC4 + unsigned char MSGFun83zone0MSGREG7; ///<_AC5 + unsigned char MSGFun83zone0MSGREG8; ///<_AC6 + unsigned char MSGFun83zone0MSGREG9; ///<_AC7 + unsigned char MSGFun83zone0MSGREGA; ///<_CRT + unsigned char MSGFun83zone0MSGREGB; ///<_PSV + + //EC LDN9 funtion 83 zone 1 + unsigned char MSGFun83zone1MSGREG0; ///<Thermal zone + unsigned char MSGFun83zone1MSGREG1; ///<Thermal zone + unsigned char MSGFun83zone1MSGREG2; ///<_AC0 + unsigned char MSGFun83zone1MSGREG3; ///<_AC1 + unsigned char MSGFun83zone1MSGREG4; ///<_AC2 + unsigned char MSGFun83zone1MSGREG5; ///<_AC3 + unsigned char MSGFun83zone1MSGREG6; ///<_AC4 + unsigned char MSGFun83zone1MSGREG7; ///<_AC5 + unsigned char MSGFun83zone1MSGREG8; ///<_AC6 + unsigned char MSGFun83zone1MSGREG9; ///<_AC7 + unsigned char MSGFun83zone1MSGREGA; ///<_CRT + unsigned char MSGFun83zone1MSGREGB; ///<_PSV + + //EC LDN9 funtion 83 zone 2 + unsigned char MSGFun83zone2MSGREG0; ///<Thermal zone + unsigned char MSGFun83zone2MSGREG1; ///<Thermal zone + unsigned char MSGFun83zone2MSGREG2; ///<_AC0 + unsigned char MSGFun83zone2MSGREG3; ///<_AC1 + unsigned char MSGFun83zone2MSGREG4; ///<_AC2 + unsigned char MSGFun83zone2MSGREG5; ///<_AC3 + unsigned char MSGFun83zone2MSGREG6; ///<_AC4 + unsigned char MSGFun83zone2MSGREG7; ///<_AC5 + unsigned char MSGFun83zone2MSGREG8; ///<_AC6 + unsigned char MSGFun83zone2MSGREG9; ///<_AC7 + unsigned char MSGFun83zone2MSGREGA; ///<_CRT + unsigned char MSGFun83zone2MSGREGB; ///<_PSV + + //EC LDN9 funtion 83 zone 3 + unsigned char MSGFun83zone3MSGREG0; ///<Thermal zone + unsigned char MSGFun83zone3MSGREG1; ///<Thermal zone + unsigned char MSGFun83zone3MSGREG2; ///<_AC0 + unsigned char MSGFun83zone3MSGREG3; ///<_AC1 + unsigned char MSGFun83zone3MSGREG4; ///<_AC2 + unsigned char MSGFun83zone3MSGREG5; ///<_AC3 + unsigned char MSGFun83zone3MSGREG6; ///<_AC4 + unsigned char MSGFun83zone3MSGREG7; ///<_AC5 + unsigned char MSGFun83zone3MSGREG8; ///<_AC6 + unsigned char MSGFun83zone3MSGREG9; ///<_AC7 + unsigned char MSGFun83zone3MSGREGA; ///<_CRT + unsigned char MSGFun83zone3MSGREGB; ///<_PSV + + //EC LDN9 funtion 85 zone 0 + unsigned char MSGFun85zone0MSGREG0; ///<Thermal zone + unsigned char MSGFun85zone0MSGREG1; ///<Thermal zone + unsigned char MSGFun85zone0MSGREG2; ///<AL0 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone0MSGREG3; ///<AL1 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone0MSGREG4; ///<AL2 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone0MSGREG5; ///<AL3 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone0MSGREG6; ///<AL4 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone0MSGREG7; ///<AL5 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone0MSGREG8; ///<AL6 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone0MSGREG9; ///<AL7 PWM level in percentage (0 - 100%) + + //EC LDN9 funtion 85 zone 1 + unsigned char MSGFun85zone1MSGREG0; ///<Thermal zone + unsigned char MSGFun85zone1MSGREG1; ///<Thermal zone + unsigned char MSGFun85zone1MSGREG2; ///<AL0 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone1MSGREG3; ///<AL1 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone1MSGREG4; ///<AL2 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone1MSGREG5; ///<AL3 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone1MSGREG6; ///<AL4 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone1MSGREG7; ///<AL5 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone1MSGREG8; ///<AL6 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone1MSGREG9; ///<AL7 PWM level in percentage (0 - 100%) + + //EC LDN9 funtion 85 zone 2 + unsigned char MSGFun85zone2MSGREG0; ///<Thermal zone + unsigned char MSGFun85zone2MSGREG1; ///<Thermal zone + unsigned char MSGFun85zone2MSGREG2; ///<AL0 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone2MSGREG3; ///<AL1 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone2MSGREG4; ///<AL2 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone2MSGREG5; ///<AL3 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone2MSGREG6; ///<AL4 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone2MSGREG7; ///<AL5 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone2MSGREG8; ///<AL6 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone2MSGREG9; ///<AL7 PWM level in percentage (0 - 100%) + + //EC LDN9 funtion 85 zone 3 + unsigned char MSGFun85zone3MSGREG0; ///<Thermal zone + unsigned char MSGFun85zone3MSGREG1; ///<Thermal zone + unsigned char MSGFun85zone3MSGREG2; ///<AL0 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone3MSGREG3; ///<AL1 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone3MSGREG4; ///<AL2 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone3MSGREG5; ///<AL3 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone3MSGREG6; ///<AL4 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone3MSGREG7; ///<AL5 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone3MSGREG8; ///<AL6 PWM level in percentage (0 - 100%) + unsigned char MSGFun85zone3MSGREG9; ///<AL7 PWM level in percentage (0 - 100%) + + //EC LDN9 funtion 89 TEMPIN channel 0 + unsigned char MSGFun89zone0MSGREG0; ///<Thermal zone + unsigned char MSGFun89zone0MSGREG1; ///<Thermal zone + unsigned char MSGFun89zone0MSGREG2; ///<At DWORD bit 0-7 + unsigned char MSGFun89zone0MSGREG3; ///<At DWORD bit 15-8 + unsigned char MSGFun89zone0MSGREG4; ///<At DWORD bit 23-16 + unsigned char MSGFun89zone0MSGREG5; ///<At DWORD bit 31-24 + unsigned char MSGFun89zone0MSGREG6; ///<Ct DWORD bit 0-7 + unsigned char MSGFun89zone0MSGREG7; ///<Ct DWORD bit 15-8 + unsigned char MSGFun89zone0MSGREG8; ///<Ct DWORD bit 23-16 + unsigned char MSGFun89zone0MSGREG9; ///<Ct DWORD bit 31-24 + unsigned char MSGFun89zone0MSGREGA; ///<Mode bit 0-7 + + //EC LDN9 funtion 89 TEMPIN channel 1 + unsigned char MSGFun89zone1MSGREG0; ///<Thermal zone + unsigned char MSGFun89zone1MSGREG1; ///<Thermal zone + unsigned char MSGFun89zone1MSGREG2; ///<At DWORD bit 0-7 + unsigned char MSGFun89zone1MSGREG3; ///<At DWORD bit 15-8 + unsigned char MSGFun89zone1MSGREG4; ///<At DWORD bit 23-16 + unsigned char MSGFun89zone1MSGREG5; ///<At DWORD bit 31-24 + unsigned char MSGFun89zone1MSGREG6; ///<Ct DWORD bit 0-7 + unsigned char MSGFun89zone1MSGREG7; ///<Ct DWORD bit 15-8 + unsigned char MSGFun89zone1MSGREG8; ///<Ct DWORD bit 23-16 + unsigned char MSGFun89zone1MSGREG9; ///<Ct DWORD bit 31-24 + unsigned char MSGFun89zone1MSGREGA; ///<Mode bit 0-7 + + //EC LDN9 funtion 89 TEMPIN channel 2 + unsigned char MSGFun89zone2MSGREG0; ///<Thermal zone + unsigned char MSGFun89zone2MSGREG1; ///<Thermal zone + unsigned char MSGFun89zone2MSGREG2; ///<At DWORD bit 0-7 + unsigned char MSGFun89zone2MSGREG3; ///<At DWORD bit 15-8 + unsigned char MSGFun89zone2MSGREG4; ///<At DWORD bit 23-16 + unsigned char MSGFun89zone2MSGREG5; ///<At DWORD bit 31-24 + unsigned char MSGFun89zone2MSGREG6; ///<Ct DWORD bit 0-7 + unsigned char MSGFun89zone2MSGREG7; ///<Ct DWORD bit 15-8 + unsigned char MSGFun89zone2MSGREG8; ///<Ct DWORD bit 23-16 + unsigned char MSGFun89zone2MSGREG9; ///<Ct DWORD bit 31-24 + unsigned char MSGFun89zone2MSGREGA; ///<Mode bit 0-7 + + //EC LDN9 funtion 89 TEMPIN channel 3 + unsigned char MSGFun89zone3MSGREG0; ///<Thermal zone + unsigned char MSGFun89zone3MSGREG1; ///<Thermal zone + unsigned char MSGFun89zone3MSGREG2; ///<At DWORD bit 0-7 + unsigned char MSGFun89zone3MSGREG3; ///<At DWORD bit 15-8 + unsigned char MSGFun89zone3MSGREG4; ///<At DWORD bit 23-16 + unsigned char MSGFun89zone3MSGREG5; ///<At DWORD bit 31-24 + unsigned char MSGFun89zone3MSGREG6; ///<Ct DWORD bit 0-7 + unsigned char MSGFun89zone3MSGREG7; ///<Ct DWORD bit 15-8 + unsigned char MSGFun89zone3MSGREG8; ///<Ct DWORD bit 23-16 + unsigned char MSGFun89zone3MSGREG9; ///<Ct DWORD bit 31-24 + unsigned char MSGFun89zone3MSGREGA; ///<Mode bit 0-7 + + // FLAG for Fun83/85/89 support + unsigned short IMCFUNSupportBitMap; /// Bit0=81FunZone0 support(1=On;0=Off); bit1-3=81FunZone1-Zone3;Bit4-7=83FunZone0-Zone3;Bit8-11=85FunZone0-Zone3;Bit11-15=89FunZone0-Zone3; +} EC_struct; +/** SBGPPPORTCONFIG - Southbridge GPP port config structure */ +typedef struct { + unsigned int PortPresent:1; /**< Port connection + * @par + * @li <b>0</b> - Port doesn't have slot. No need to train the link + * @li <b>1</b> - Port connection defined and needs to be trained + */ + unsigned int PortDetected:1; /**< Link training status + * @par + * @li <b>0</b> - EP not detected + * @li <b>1</b> - EP detected + */ + unsigned int PortIsGen2:2; /**< Port link speed configuration + * @par + * @li <b>00</b> - Auto + * @li <b>01</b> - Forced GEN1 + * @li <b>10</b> - Forced GEN2 + * @li <b>11</b> - Reserved + */ + + unsigned int PortHotPlug:1; /**< Support hot plug? + * @par + * @li <b>0</b> - No support + * @li <b>1</b> - support + */ +/** PortMisc - Reserved */ + unsigned int PortMisc:27; +} SBGPPPORTCONFIG; + +/** CODECENTRY - Southbridge HD Audio OEM Codec structure */ +typedef struct _CODECENTRY { +/** Nid - Reserved ?? */ + unsigned char Nid; +/** Byte40 - Reserved ?? */ + unsigned int Byte40; +} CODECENTRY; + +/** CODECTBLLIST - Southbridge HD Audio Codec table list */ +typedef struct _CODECTBLLIST { +/** CodecID - Codec ID */ + unsigned int CodecID; +/** CodecTablePtr - Codec table pointer */ + CODECENTRY* CodecTablePtr; +} CODECTBLLIST; + +/** Sata Controller structure */ +typedef struct _SATAST { + unsigned char SataController:1; /**< SataController + * @par + * Sata Controller + * @li <b>0</b> - disable + * @li <b>1</b> - enable + */ + unsigned char SataIdeCombMdPriSecOpt:1; /**< SataIdeCombMdPriSecOpt - Reserved */ + unsigned char SataSetMaxGen2:1; /**< SataSetMaxGen2 + * @par + * Sata Controller Set to Max Gen2 mode + * @li <b>0</b> - disable + * @li <b>1</b> - enable + */ + unsigned char SataIdeCombinedMode:1; /**< SataIdeCombinedMode + * @par + * Sata IDE Controller set to Combined Mode + * @li <b>0</b> - enable + * @li <b>1</b> - disable + */ +/** SATARefClkSel - Reserved */ + unsigned char SATARefClkSel:2; // 4:5 +/** SATARefDivSel - Reserved */ + unsigned char SATARefDivSel:2; // 6:7 +} SATAST; + +/** _USBST Controller structure + * + * Usb Ohci1 Contoller is define at BIT0 + * - 0:disable 1:enable + * (Bus 0 Dev 18 Func0) * + * Usb Ehci1 Contoller is define at BIT1 + * - 0:disable 1:enable + * (Bus 0 Dev 18 Func2) * + * Usb Ohci2 Contoller is define at BIT2 + * - 0:disable 1:enable + * (Bus 0 Dev 19 Func0) * + * Usb Ehci2 Contoller is define at BIT3 + * - 0:disable 1:enable + * (Bus 0 Dev 19 Func2) * + * Usb Ohci3 Contoller is define at BIT4 + * - 0:disable 1:enable + * (Bus 0 Dev 22 Func0) * + * Usb Ehci3 Contoller is define at BIT5 + * - 0:disable 1:enable + * (Bus 0 Dev 22 Func2) * + * Usb Ohci4 Contoller is define at BIT6 + * - 0:disable 1:enable + * (Bus 0 Dev 20 Func5) * + */ +typedef struct _USBST { + unsigned char Ohci1:1; ///< Ohci0 controller - 0:disable, 1:enable + unsigned char Ehci1:1; ///< Ehci1 controller - 0:disable, 1:enable + unsigned char Ohci2:1; ///< Ohci2 controller - 0:disable, 1:enable + unsigned char Ehci2:1; ///< Ehci2 controller - 0:disable, 1:enable + unsigned char Ohci3:1; ///< Ohci3 controller - 0:disable, 1:enable + unsigned char Ehci3:1; ///< Ehci3 controller - 0:disable, 1:enable + unsigned char Ohci4:1; ///< Ohci4 controller - 0:disable, 1:enable + unsigned char UTemp:1; ///< Reserved +} USBST; + +/** + * _AZALIAPIN - HID Azalia or GPIO define structure. + * + */ +typedef struct _AZALIAPIN { + unsigned char AzaliaSdin0:2; /**< AzaliaSdin0 + * @par + * SDIN0 is define at BIT0 & BIT1 + * @li <b>00</b> - GPIO PIN + * @li <b>10</b> - As a Azalia SDIN pin + */ + unsigned char AzaliaSdin1:2; /**< AzaliaSdin1 + * @par + * SDIN0 is define at BIT2 & BIT3 + * @li <b>00</b> - GPIO PIN + * @li <b>10</b> - As a Azalia SDIN pin + */ + unsigned char AzaliaSdin2:2; /**< AzaliaSdin2 + * @par + * SDIN0 is define at BIT4 & BIT5 + * @li <b>00</b> - GPIO PIN + * @li <b>10</b> - As a Azalia SDIN pin + */ + unsigned char AzaliaSdin3:2; /**< AzaliaSdin3 + * @par + * SDIN0 is define at BIT6 & BIT7 + * @li <b>00</b> - GPIO PIN + * @li <b>10</b> - As a Azalia SDIN pin + */ +} AZALIAPIN; + +/** AMDSBCFG - Southbridge CIMx configuration structure (Main) */ +typedef struct _AMDSBCFG { +/** StdHeader - Standard header for all AGESA/CIMx services. */ + AMD_CONFIG_PARAMS StdHeader; + +/** BuildParameters - The STATIC platform information for CIMx Module. */ + BUILDPARAM BuildParameters; + //offset 90 bytes (32-121) + //MsgXchgBiosCimx //offset 4 bytes (122-125) + // SATA Configuration + + union /**< union - Reserved */ + { /**< SATAMODE - Sata Controller structure */ +/** SataModeReg - Reserved */ + unsigned char SataModeReg; +/** SataMode - Reserved */ + SATAST SataMode; + } SATAMODE; +/** S3Resume - Flag of ACPI S3 Resume. */ + unsigned char S3Resume:1; // 8 +/** RebootRequired - Flag of Reboot system is required. */ + unsigned char RebootRequired:1; // 9 +/** SbSpiSpeedSupport - Reserved */ + unsigned char SbSpiSpeedSupport:1; // 10 +/**< SpreadSpectrum + * @par + * Spread Spectrum function + * @li <b>0</b> - disable + * @li <b>1</b> - enable + */ + unsigned char SpreadSpectrum:1; // 11 +/** NbSbGen2 - Reserved */ + unsigned char NbSbGen2:1; // 12 + unsigned char GppGen2:1; // 13 + unsigned char GppMemWrImprove:1; // 14 +/** MsgXchgBiosCimxReserved - Reserved */ + unsigned char MsgXchgBiosCimxReserved:1; // 15 (BB USED) +/**< SataClass - SATA Controller mode [16:18] + * @par + * @li <b>000</b> - Native IDE mode + * @li <b>001</b> - RAID mode + * @li <b>010</b> - AHCI mode + * @li <b>011</b> - Legacy IDE mode + * @li <b>100</b> - IDE->AHCI mode + * @li <b>101</b> - AHCI mode as 4394 ID (AMD driver) + * @li <b>110</b> - IDE->AHCI mode as 4394 ID (AMD driver) + */ + unsigned short SataClass:3; // 16:18 +/**< Sata IDE Controller mode + * @par + * @li <b>0</b> - Legacy IDE mode + * @li <b>1</b> - Native IDE mode + */ + unsigned short SataIdeMode:1; // 19 +/**< SataEspPort - SATA port is external accessible on a signal only connector (eSATA:) + * @par + * @li <b> BIT0 </b> - PORT0 set as ESP port + * @li <b> BIT1 </b> - PORT1 set as ESP port + * @li <b> BIT2 </b> - PORT2 set as ESP port + * @li <b> BIT3 </b> - PORT3 set as ESP port + * @li <b> BIT4 </b> - PORT4 set as ESP port + * @li <b> BIT5 </b> - PORT5 set as ESP port + */ + unsigned short SataEspPort:6; // 20:25 +/** SataPortPower - Reserved */ + unsigned short SataPortPower:6; // 31:26 + + // SATA Debug Option //offset 4 bytes (126-129) + +/**< SataPortMode - Force Each PORT to GEN1/GEN2 mode + * @par + * @li <b> 0 </b> Auto for each PORTs + * @li <b> BIT0 = 1</b> - PORT0 set to GEN1 + * @li <b> BIT1 = 1</b> - PORT0 set to GEN2 + * @li <b> BIT2 = 1</b> - PORT1 set to GEN1 + * @li <b> BIT3 = 1</b> - PORT1 set to GEN2 + * @li <b> BIT4 = 1</b> - PORT2 set to GEN1 + * @li <b> BIT5 = 1</b> - PORT2 set to GEN2 + * @li <b> BIT6 = 1</b> - PORT3 set to GEN1 + * @li <b> BIT7 = 1</b> - PORT3 set to GEN2 + * @li <b> BIT8 = 1</b> - PORT4 set to GEN1 + * @li <b> BIT9 = 1</b> - PORT4 set to GEN2 + * @li <b> BIT10 = 1</b> - PORT5 set to GEN1 + * @li <b> BIT11 = 1</b> - PORT5 set to GEN2 + */ + unsigned int SataPortMode:12; //11:0 +/** SATAClkSelOpt - Reserved */ + unsigned int SATAClkSelOpt:4; // Removed from coding side +/** SataAggrLinkPmCap - Reserved */ + unsigned int SataAggrLinkPmCap:1; //16, 0:OFF 1:ON +/** SataPortMultCap - Reserved */ + unsigned int SataPortMultCap:1; //17, 0:OFF 1:ON +/** SataClkAutoOff - Reserved */ + unsigned int SataClkAutoOff:1; //18, AutoClockOff 0:Disabled, 1:Enabled +/** SataPscCap - Reserved */ + unsigned int SataPscCap:1; //19, 0:Enable PSC capability, 1:Disable PSC capability +/** BIOSOSHandoff - Reserved */ + unsigned int BIOSOSHandoff:1; //20 +/** SataFisBasedSwitching - Reserved */ + unsigned int SataFisBasedSwitching:1; //21 +/** SataCccSupport - Reserved */ + unsigned int SataCccSupport:1; //22 +/** SataSscCap - Reserved */ + unsigned int SataSscCap:1; //23, 0:Enable SSC capability, 1:Disable SSC capability +/** SataMsiCapability - Reserved */ + unsigned int SataMsiCapability:1; //24 0:Hidden 1:Visible. This feature is disabled per RPR, but remains the interface. +/** SataForceRaid - Reserved */ + unsigned int SataForceRaid:1; //25 0:No function 1:Force RAID +/** SataDebugDummy - Reserved */ + unsigned int SataDebugDummy:6; //31:26 +// +// USB Configuration //offset 4 bytes (130-133) +// + +/** USBDeviceConfig - USB Controller Configuration + * + * - Usb Ohci1 Contoller is define at BIT0 + * - 0:disable 1:enable + * (Bus 0 Dev 18 Func0) * + * - Usb Ehci1 Contoller is define at BIT1 + * - 0:disable 1:enable + * (Bus 0 Dev 18 Func2) * + * - Usb Ohci2 Contoller is define at BIT2 + * - 0:disable 1:enable + * (Bus 0 Dev 19 Func0) * + * - Usb Ehci2 Contoller is define at BIT3 + * - 0:disable 1:enable + * (Bus 0 Dev 19 Func2) * + * - Usb Ohci3 Contoller is define at BIT4 + * - 0:disable 1:enable + * (Bus 0 Dev 22 Func0) * + * - Usb Ehci3 Contoller is define at BIT5 + * - 0:disable 1:enable + * (Bus 0 Dev 22 Func2) * + * - Usb Ohci4 Contoller is define at BIT6 + * - 0:disable 1:enable + * (Bus 0 Dev 20 Func5) * + */ + union /**< union - Reserved */ + { /**< USBMODE - USB Controller structure */ +/** SataModeReg - Reserved */ + unsigned char UsbModeReg; +/** SataMode - Reserved */ + USBST UsbMode; + } USBMODE; +/*! + */ + +/**< GecConfig + * @par + * InChip Gbit NIC + * @li <b>1</b> - disable + * @li <b>0</b> - enable + */ + unsigned char GecConfig:1; //8 + +/**< IrConfig + * @par + * Ir Controller setting + * @li <b>00 </b> - disable + * @li <b>01 </b> - Rx and Tx0 + * @li <b>10 </b> - Rx and Tx1 + * @li <b>11 </b> - Rx and both Tx0,Tx1 + */ + unsigned char IrConfig:2; //9:10 + +/** GecDummy - Reserved */ + unsigned char GecDummy:5; //15:11 + + //Azalia Configuration + +/**< AzaliaController - Azalia Controller Configuration + * @par + * Azalia Controller [0-1] + * @li <b>0</b> - Auto : Detect Azalia controller automatically. + * @li <b>1</b> - Diable : Disable Azalia controller. + * @li <b>2</b> - Enable : Enable Azalia controller. + */ + unsigned char AzaliaController:2; //17:16 +/**< AzaliaPinCfg - Azalia Controller SDIN pin Configuration + * @par + * @li <b>0</b> - disable + * @li <b>1</b> - enable + */ + unsigned char AzaliaPinCfg:1; //18 +/**< AzaliaFrontPanel - Azalia Controller Front Panel Configuration + * @par + * Support Front Panel configuration + * @li <b>0</b> - Auto + * @li <b>1</b> - disable + * @li <b>2</b> - enable + */ + unsigned char AzaliaFrontPanel:2; //20:19 +/**< FrontPanelDetected - Force Azalia Controller Front Panel Configuration + * @par + * Force Front Panel configuration + * @li <b>0</b> - Not Detected + * @li <b>1</b> - Detected + */ + unsigned char FrontPanelDetected:1; //21 +/**< AzaliaSnoop - Azalia Controller Snoop feature Configuration + * @par + * Azalia Controller Snoop feature Configuration + * @li <b>0</b> - disable + * @li <b>1</b> - enable + */ + unsigned char AzaliaSnoop:1; //22 +/** AzaliaDummy - Reserved */ + unsigned char AzaliaDummy:1; //23 + + union + { +/**< AzaliaSdinPin - Azalia Controller SDIN pin Configuration + * + * SDIN0 is define at BIT0 & BIT1 + * - 00: GPIO PIN + * - 01: Reserved + * - 10: As a Azalia SDIN pin + * + * SDIN1 is define at BIT2 & BIT3 + * * Config same as SDIN0 + * SDIN2 is define at BIT4 & BIT5 + * * Config same as SDIN0 + * SDIN3 is define at BIT6 & BIT7 + * * Config same as SDIN0 + */ + unsigned char AzaliaSdinPin; + AZALIAPIN AzaliaConfig; + } AZALIACONFIG; + +/** AZOEMTBL - Azalia Controller OEM Codec Table Pointer + * + */ + union + { + PLACEHOLDER PlaceHolder; + CODECTBLLIST* pAzaliaOemCodecTablePtr; //offset 4 bytes (134-137) + } AZOEMTBL; + +/** AZOEMFPTBL - Azalia Controller Front Panel OEM Table Pointer + * + */ + union + { + PLACEHOLDER PlaceHolder; + void* pAzaliaOemFpCodecTablePtr; //offset 4 bytes (138-141) + } AZOEMFPTBL; + + //Miscellaneous Configuration //offset 4 bytes (142-145) +/** AnyHT200MhzLink - Reserved */ + unsigned int AnyHT200MhzLink:1; //0 +/**< HpetTimer - South Bridge Hpet Timer Configuration + * @par + * @li <b>0</b> - disable + * @li <b>1</b> - enable + */ + unsigned int HpetTimer:1; //1 +/**< PciClks - PCI Slot Clock Control + * @par + * PCI SLOT 0 define at BIT0 + * - 00: disable + * - 01: enable + * + * PCI SLOT 1 define at BIT1 + * * Config same as PCI SLOT0 + * PCI SLOT 2 define at BIT2 + * * Config same as PCI SLOT0 + * PCI SLOT 3 define at BIT3 + * * Config same as PCI SLOT0 + * PCI SLOT 4 define at BIT4 + * * Config same as PCI SLOT0 + */ + unsigned int PciClks:5; //2:6 +/** MiscReserved1 - Reserved */ + unsigned int MiscReserved1:4; //9:7, Reserved +/** MobilePowerSavings - Debug function Reserved */ + unsigned int MobilePowerSavings:1; //11, 0:Disable, 1:Enable Power saving features especially for Mobile platform +/** MiscDummy1 - Debug function Reserved */ + unsigned int MiscDummy1:1; +/** NativePcieSupport - Debug function Reserved */ + unsigned int NativePcieSupport:1; //13, 0:Enable, 1:Disabled +/** FlashPinConfig - Debug function Reserved */ + unsigned int FlashPinConfig:1; //14, 0:desktop mode 1:mobile mode +/** UsbPhyPowerDown - Debug function Reserved */ + unsigned int UsbPhyPowerDown:1; //15 +/** PcibClkStopOverride - Debug function Reserved */ + unsigned int PcibClkStopOverride:10; //25:16 +/**< HpetMsiDis - South Bridge HPET MSI Configuration + * @par + * @li <b>1</b> - disable + * @li <b>0</b> - enable + */ + unsigned int HpetMsiDis:1; //26 +/**< ResetCpuOnSyncFlood - Rest CPU on Sync Flood + * @par + * @li <b>0</b> - disable + * @li <b>1</b> - enable + */ + unsigned int ResetCpuOnSyncFlood:1; //27 +/**< LdtStpDisable - LdtStp# output disable + * @par + * @li <b>0</b> - LdtStp# output enable + * @li <b>1</b> - LdtStp# output disable + */ + unsigned int LdtStpDisable:1; //28 +/**< MTC1e - Message Triggered C1e + * @par + * @li <b>0</b> - disable + * @li <b>1</b> - enable + */ + unsigned int MTC1e:1; //29 +/** MiscDummy - Reserved */ + unsigned int MiscDummy:2; //31:30 + unsigned int SioHwmPortEnable:1; // Enable SuperIO HWM access via LPC + + //DebugOptions //offset 4 bytes (146-149) +/** PcibAutoClkCtrlLow - Debug function Reserved */ + unsigned int PcibAutoClkCtrlLow:16; +/** PcibAutoClkCtrlHigh - Debug function Reserved */ + unsigned int PcibAutoClkCtrlHigh:16; + +/**< OEMPROGTBL - ACPI MMIO register setting table OEM override + * @par + * OEM table for customer override ACPI MMIO register in their code. + */ + union + { + PLACEHOLDER OemProgrammingTablePtr; //offset 4 bytes (150-153) + void *OemProgrammingTablePtr_Ptr; + } OEMPROGTBL; + + //Gpp Configuration //offset 24 bytes total (154-177) + union { + unsigned int PORTCFG32; + SBGPPPORTCONFIG PortCfg; + } PORTCONFIG[MAX_GPP_PORTS]; //offset 16 bytes + + unsigned int GppLinkConfig; // GPP_LINK_CONFIG = PCIE_GPP_Enable[3:0] + // 0000 - Port ABCD -> 4:0:0:0 + // 0001 - N/A + // 0010 - Port ABCD -> 2:2:0:0 + // 0011 - Port ABCD -> 2:1:1:0 + // 0100 - Port ABCD -> 1:1:1:1 + // + unsigned int GppFoundGfxDev:4; //3:0 If port A-D (mapped to bit [3:0]) has GFX EP detected + unsigned int CoreGen2Enable:1; //4 + unsigned int GppFunctionEnable:1; //5 + unsigned int GppUnhidePorts:1; //6 + unsigned int AlinkPhyPllPowerDown:1; //7 + unsigned int GppConfigDummy1:2; //9:8 + unsigned int GppLaneReversal:1; //10 + unsigned int GppPhyPllPowerDown:1; //11 + unsigned int GppCompliance :1; //12 + unsigned int GppPortAspm:8; //20:13 ASPM state for GPP ports, 14:13 for port0, ..., 20:19 for port3 + // 00 - Disabled + // 01 - L0s + // 10 - L1 + // 11 - L0s + L1 + // + unsigned int GppConfigDummy:11; //31:21 + + //TempMMIO //offset 4 bytes (178-181) + unsigned int TempMMIO; + + // DebugOption2 + unsigned int GecPhyStatus:1; + unsigned int GecDebugOptionDummy:7; + unsigned int SBGecPwr:2; + unsigned int SBGecDebugBus:1; + unsigned int DebugOption2Dummy1:1; + unsigned int DebugOption2Dummy2:1; + unsigned int SbPcieOrderRule:1; + unsigned int SbUsbPll:1; + unsigned int AcDcMsg:1; + unsigned int TimerTickTrack:1; + unsigned int ClockInterruptTag:1; + unsigned int OhciTrafficHanding:1; + unsigned int EhciTrafficHanding:1; + unsigned int FusionMsgCMultiCore:1; + unsigned int FusionMsgCStage:1; +/**< UsbRxMode - CG PLL multiplier for USB Rx 1.1 mode + * @par + * @li <b>0</b> - disable + * @li <b>1</b> - enable + */ + unsigned int UsbRxMode:1; + unsigned int DebugOption2Dummy3:9; // + + union + { + PLACEHOLDER DynamicGecRomAddressPtr; //offset 4 bytes (182-185) + void *DynamicGecRomAddress_Ptr; + } DYNAMICGECROM; + EC_struct Pecstruct; +} AMDSBCFG; + +/** SMMSERVICESTRUC- Southbridge SMI service structure */ +typedef struct _SMMSERVICESTRUC { +/** enableRegNum - Reserved */ + unsigned char enableRegNum; +/** enableBit - Reserved */ + unsigned char enableBit; +/** statusRegNum - Reserved */ + unsigned char statusRegNum; +/** statusBit - Reserved */ + unsigned char statusBit; +/** *debugMessage- Reserved */ + signed char *debugMessage; +/** serviceRoutine - Reserved */ + SMM_SERVICE_ROUTINE serviceRoutine; +} SMMSERVICESTRUC; + +#ifndef _NB_REG8MASK_ + +/** + * - Byte Register R/W structure + * + */ + typedef struct _Reg8Mask { +/** bRegIndex - Reserved */ + unsigned char bRegIndex; +/** bANDMask - Reserved */ + unsigned char bANDMask; +/** bORMask - Reserved */ + unsigned char bORMask; + } REG8MASK; +#endif + +/** + * - SATA Phy setting structure + * + */ +typedef struct _SATAPHYSETTING { +/** wPhyCoreControl - Reserved */ + unsigned short wPhyCoreControl; +/** dwPhyFineTune - Reserved */ + unsigned int dwPhyFineTune; +} SATAPHYSETTING; + +/** + * _ABTblEntry - AB link register table R/W structure + * + */ +typedef struct _ABTblEntry { + /** regType : AB Register Type (ABCFG, AXCFG and so on) */ + unsigned char regType; + /** regIndex : AB Register Index */ + unsigned int regIndex; + /** regMask : AB Register Mask */ + unsigned int regMask; + /** regData : AB Register Data */ + unsigned int regData; +} ABTBLENTRY; + +/** + * _AcpiRegWrite - ACPI MMIO register R/W structure + * + */ +typedef struct _AcpiRegWrite { + /** MmioBase : Index of Soubridge block (For instence GPIO_BASE:0x01 SMI_BASE:0x02) */ + unsigned char MmioBase; + /** MmioReg : Register index */ + unsigned char MmioReg; + /** DataANDMask : AND Register Data */ + unsigned char DataANDMask; + /** DataOrMask : Or Register Data */ + unsigned char DataOrMask; +} AcpiRegWrite; + +/** + * PCI_ADDRESS - PCI access structure + * + */ +#define PCI_ADDRESS(bus, dev, func, reg) \ +(unsigned int) ( (((unsigned int)bus) << 24) + (((unsigned int)dev) << 19) + (((unsigned int)func) << 16) + ((unsigned int)reg) ) + +/** + * CIM_STATUS - CIMx module function return code + */ +typedef unsigned int CIM_STATUS; +/** + * CIM_SUCCESS - Executed without error + */ +#define CIM_SUCCESS 0x00000000 +/** + * CIM_ERROR - call error + */ +#define CIM_ERROR 0x80000000 +/** + * CIM_UNSUPPORTED - function does not support + */ +#define CIM_UNSUPPORTED 0x80000001 + +#pragma pack (pop) + +/** + * CIMX_OPTION_DISABLED - Define disable in module + */ +#define CIMX_OPTION_DISABLED 0 +/** + * CIMX_OPTION_ENABLED - Define enable in module + */ +#define CIMX_OPTION_ENABLED 1 + +/** + * SATA_IDE_COMBINE_ENABLE -Define Enable Combined Mode + */ +#define SATA_IDE_COMBINE_ENABLE 0 + +/** + * SATA_IDE_COMBINE_DISABLE -Define Disable Combined Mode + */ +#define SATA_IDE_COMBINE_DISABLE 1 + +// mov al, code +// out 80h, al +// jmp $ + +/** + * DBG_STOP - define a debug point + */ +#define DBG_STOP __asm _emit 0xEB __asm _emit 0xFE + +/** + * STOP_CODE - define a debug point + * Warning: AL gets destroyed! + */ +#define STOP_CODE (code) __asm __emit 0xB0 __asm __emit code __asm __emit 0xE6 \ + __asm __emit 0x80 __asm _emit 0xEB __asm _emit 0xFE + +#endif // _AMD_SBTYPE_H_ diff --git a/src/vendorcode/amd/cimx/sb800/Smm.c b/src/vendorcode/amd/cimx/sb800/Smm.c new file mode 100644 index 0000000..894ec2a --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/Smm.c @@ -0,0 +1,86 @@ +/** + * @file + * + * Southbridge SMM service function + * + * Prepare SMM service module for IBV call Southbridge SMI service routine. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: CIMx-SB + * @e sub-project: + * @e $Revision:$ @e $Date:$ + * + */ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#include "SBPLATFORM.h" +#include "cbtypes.h" + +// +// Declaration of local functions +// + +/** + * Southbridge SMI service module + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +sbSmmService ( + IN AMDSBCFG* pConfig + ) +{ + AMDSBCFG* pTmp; //lx-dummy for /W4 build + pTmp = pConfig; +} + +/** + * softwareSMIservice - Software SMI service + * + * @param[in] VOID Southbridge software SMI service ID. + * + */ +VOID +softwareSMIservice ( + IN VOID + ) +{ +} + + + + + diff --git a/src/vendorcode/amd/cimx/sb800/USB.c b/src/vendorcode/amd/cimx/sb800/USB.c deleted file mode 100644 index 14794cd..0000000 --- a/src/vendorcode/amd/cimx/sb800/USB.c +++ /dev/null @@ -1,431 +0,0 @@ -/** - * @file - * - * Config Southbridge USB controller - * - * Init USB features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: CIMx-SB - * @e sub-project: - * @e $Revision:$ @e $Date:$ - * - */ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - - -#include "SBPLATFORM.h" -#include "cbtypes.h" - -// -// Declaration of local functions -// - -/** - * EhciInitAfterPciInit - Config USB controller after PCI emulation - * - * @param[in] Value Controller PCI config address (bus# + device# + function#) - * @param[in] pConfig Southbridge configuration structure pointer. - */ -VOID EhciInitAfterPciInit (IN UINT32 Value, IN AMDSBCFG* pConfig); -/** - * OhciInitAfterPciInit - Config USB OHCI controller after PCI emulation - * - * @param[in] Value Controller PCI config address (bus# + device# + function#) - * @param[in] pConfig Southbridge configuration structure pointer. - */ -VOID OhciInitAfterPciInit (IN UINT32 Value, IN AMDSBCFG* pConfig); - -/** - * SetEhciP11Wr - FIXME - * - * @param[in] Value Controller PCI config address (bus# + device# + function#) - * @param[in] pConfig Southbridge configuration structure pointer. - */ -UINT32 SetEhciPllWr (IN UINT32 Value, IN AMDSBCFG* pConfig); - - -/** - * usbInitBeforePciEnum - Config USB controller before PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -usbInitBeforePciEnum ( - IN AMDSBCFG* pConfig - ) -{ - // Disabled All USB controller - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEF, AccWidthUint8, BIT7, 0); - // Clear PM_IO 0x65[4] UsbResetByPciRstEnable, Set this bit so that usb gets reset whenever there is PCIRST. - // Enable UsbResumeEnable (USB PME) * Default value - // In SB700 USB SleepCtrl set as BIT10+BIT9, but SB800 default is BIT9+BIT8 (6 uframes) - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF0, AccWidthUint16 | S3_SAVE, ~BIT2, BIT2 + BIT7 + BIT8 + BIT9); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEF, AccWidthUint8, 0, pConfig->USBMODE.UsbModeReg); -} - -/** - * usbInitAfterPciInit - Config USB controller after PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -usbInitAfterPciInit ( - IN AMDSBCFG* pConfig - ) -{ - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGED, AccWidthUint8, ~BIT1, BIT1); - - usb1EhciInitAfterPciInit (pConfig); - usb2EhciInitAfterPciInit (pConfig); - usb3EhciInitAfterPciInit (pConfig); - usb1OhciInitAfterPciInit (pConfig); - usb2OhciInitAfterPciInit (pConfig); - usb3OhciInitAfterPciInit (pConfig); - usb4OhciInitAfterPciInit (pConfig); - - if ( pConfig->UsbPhyPowerDown ) { - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF0, AccWidthUint8, ~BIT0, BIT0); - } else - { - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF0, AccWidthUint8, ~BIT0, 0); - } - -} - -/** - * usb1EhciInitAfterPciInit - Config USB1 EHCI controller after PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -usb1EhciInitAfterPciInit ( - IN AMDSBCFG* pConfig - ) -{ - UINT32 ddDeviceId; - ddDeviceId = (USB1_EHCI_BUS_DEV_FUN << 16); - EhciInitAfterPciInit (ddDeviceId, pConfig); -} - -/** - * usb2EhciInitAfterPciInit - Config USB2 EHCI controller after PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -usb2EhciInitAfterPciInit ( - IN AMDSBCFG* pConfig - ) -{ - UINT32 ddDeviceId; - ddDeviceId = (USB2_EHCI_BUS_DEV_FUN << 16); - EhciInitAfterPciInit (ddDeviceId, pConfig); -} - -/** - * usb3EhciInitAfterPciInit - Config USB3 EHCI controller after PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -usb3EhciInitAfterPciInit ( - IN AMDSBCFG* pConfig - ) -{ - UINT32 ddDeviceId; - ddDeviceId = (USB3_EHCI_BUS_DEV_FUN << 16); - EhciInitAfterPciInit (ddDeviceId, pConfig); -} - -VOID -EhciInitAfterPciInit ( - IN UINT32 Value, - IN AMDSBCFG* pConfig - ) -{ - UINT32 ddBarAddress; - UINT32 ddVar; - //Get BAR address - ReadPCI ((UINT32) Value + SB_EHCI_REG10, AccWidthUint32, &ddBarAddress); - if ( (ddBarAddress != - 1) && (ddBarAddress != 0) ) { - //Enable Memory access - RWPCI ((UINT32) Value + SB_EHCI_REG04, AccWidthUint8, 0, BIT1); - if (pConfig->BuildParameters.EhciSsid != 0 ) { - RWPCI ((UINT32) Value + SB_EHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pConfig->BuildParameters.EhciSsid); - } - //USB Common PHY CAL & Control Register setting - ddVar = 0x00020F00; - WriteMEM (ddBarAddress + SB_EHCI_BAR_REGC0, AccWidthUint32, &ddVar); - // RPR IN AND OUT DATA PACKET FIFO THRESHOLD - // EHCI BAR 0xA4 //IN threshold bits[7:0]=0x40 //OUT threshold bits[23:16]=0x40 - RWMEM (ddBarAddress + SB_EHCI_BAR_REGA4, AccWidthUint32, 0xFF00FF00, 0x00400040); - // RPR EHCI Dynamic Clock Gating Feature - RWMEM (ddBarAddress + SB_EHCI_BAR_REGBC, AccWidthUint32, ~BIT12, 0); - // RPR Enable adding extra flops to PHY rsync path - // Step 1: - // EHCI_BAR 0xB4 [6] = 1 - // EHCI_BAR 0xB4 [7] = 0 - // EHCI_BAR 0xB4 [12] = 0 ("VLoad") - // All other bit field untouched - // Step 2: - // EHCI_BAR 0xB4[12] = 1 - RWMEM (ddBarAddress + SB_EHCI_BAR_REGB4, AccWidthUint32, ~(BIT6 + BIT7 + BIT12), 0x00); - RWMEM (ddBarAddress + SB_EHCI_BAR_REGB4, AccWidthUint32, ~BIT12, BIT12); - //Set EHCI_pci_configx50[6]='1' to disable EHCI MSI support - //RPR recommended setting "EHCI Async Park Mode" - //Set EHCI_pci_configx50[23]='0' to enable "EHCI Async Park Mode support" - //RPR Enabling EHCI Async Stop Enhancement - //Set EHCI_pci_configx50[29]='1' to disableEnabling EHCI Async Stop Enhancement - RWPCI ((UINT32) Value + SB_EHCI_REG50, AccWidthUint32 | S3_SAVE, ~(BIT23), BIT29 + BIT23 + BIT8 + BIT6); - // RPR recommended setting "EHCI Advance PHY Power Savings" - // Set EHCI_pci_configx50[31]='1' - // Fix for EHCI controller driver yellow sign issue under device manager - // when used in conjunction with HSET tool driver. EHCI PCI config 0x50[20]=1 - RWPCI ((UINT32) Value + SB_EHCI_REG50 + 2, AccWidthUint16 | S3_SAVE, (UINT16)0xFFFF, BIT15); - // RPR USB Delay A-Link Express L1 State - // RPR PING Response Fix Enable EHCI_PCI_Config x54[1] = 1 - // RPR Empty-list Detection Fix Enable EHCI_PCI_Config x54[3] = 1 - RWPCI ((UINT32) Value + SB_EHCI_REG54, AccWidthUint32 | S3_SAVE, ~BIT0, BIT0); - if ( pConfig->BuildParameters.UsbMsi) { - RWPCI ((UINT32) Value + SB_EHCI_REG50, AccWidthUint32 | S3_SAVE, ~BIT6, 0x00); - } - } -} - -/** - * usb1OhciInitAfterPciInit - Config USB1 OHCI controller after PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -usb1OhciInitAfterPciInit ( - IN AMDSBCFG* pConfig - ) -{ - UINT32 ddDeviceId; - ddDeviceId = (USB1_OHCI_BUS_DEV_FUN << 16); - OhciInitAfterPciInit (ddDeviceId, pConfig); -} - -/** - * usb2OhciInitAfterPciInit - Config USB2 OHCI controller after PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -usb2OhciInitAfterPciInit ( - IN AMDSBCFG* pConfig - ) -{ - UINT32 ddDeviceId; - ddDeviceId = (USB2_OHCI_BUS_DEV_FUN << 16); - OhciInitAfterPciInit (ddDeviceId, pConfig); -} - -/** - * usb3OhciInitAfterPciInit - Config USB3 OHCI controller after PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -usb3OhciInitAfterPciInit ( - IN AMDSBCFG* pConfig - ) -{ - UINT32 ddDeviceId; - ddDeviceId = (USB3_OHCI_BUS_DEV_FUN << 16); - OhciInitAfterPciInit (ddDeviceId, pConfig); -} - -/** - * usb4OhciInitAfterPciInit - Config USB4 OHCI controller after PCI emulation - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -usb4OhciInitAfterPciInit ( - IN AMDSBCFG* pConfig - ) -{ - UINT32 ddDeviceId; - ddDeviceId = (USB4_OHCI_BUS_DEV_FUN << 16); - OhciInitAfterPciInit (ddDeviceId, pConfig); - if (pConfig->BuildParameters.Ohci4Ssid != 0 ) { - RWPCI ((USB4_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pConfig->BuildParameters.Ohci4Ssid); - } -} - -VOID -OhciInitAfterPciInit ( - IN UINT32 Value, - IN AMDSBCFG* pConfig - ) -{ - // Disable the MSI capability of USB host controllers - RWPCI ((UINT32) Value + SB_OHCI_REG40 + 1, AccWidthUint8 | S3_SAVE, 0xFF, BIT0); - RWPCI ((UINT32) Value + SB_OHCI_REG50, AccWidthUint8 | S3_SAVE, ~(BIT5 + BIT12), 0x00); - // RPR USB SMI Handshake - RWPCI ((UINT32) Value + SB_OHCI_REG50 + 1, AccWidthUint8 | S3_SAVE, ~BIT4, 0x00); - // SB02186 - RWPCI ((UINT32) Value + SB_OHCI_REG50 + 1, AccWidthUint8 | S3_SAVE, 0xFC, 0x00); - if (Value != (USB4_OHCI_BUS_DEV_FUN << 16)) { - if ( pConfig->BuildParameters.OhciSsid != 0 ) { - RWPCI ((UINT32) Value + SB_OHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pConfig->BuildParameters.OhciSsid); - } - } - //RPR recommended setting to, enable fix to cover the corner case S3 wake up issue from some USB 1.1 devices - //OHCI 0_PCI_Config 0x50[30] = 1 - RWPCI ((UINT32) Value + SB_OHCI_REG50 + 3, AccWidthUint8 | S3_SAVE, ~BIT6, BIT6); - if ( pConfig->BuildParameters.UsbMsi) { - RWPCI ((UINT32) Value + SB_OHCI_REG40 + 1, AccWidthUint8 | S3_SAVE, ~BIT0, 0x00); - RWPCI ((UINT32) Value + SB_OHCI_REG50, AccWidthUint8 | S3_SAVE, ~BIT5, BIT5); - } -} - - -UINT32 -SetEhciPllWr ( - IN UINT32 Value, - IN AMDSBCFG* pConfig - ) -{ - UINT32 ddRetureValue; - UINT32 ddBarAddress; - UINT16 dwVar; - UINT16 dwData; - UINT8 portSC; - ddRetureValue = 0; - dwData = 0; - // Memory, and etc. - //_asm { jmp $}; - RWPCI ((UINT32) Value + 0xC4, AccWidthUint8, 0xF0, 0x00); - RWPCI ((UINT32) Value + 0x04, AccWidthUint8, 0xFF, 0x02); - // Get Bar address - ReadPCI ((UINT32) Value + 0x10, AccWidthUint32, &ddBarAddress); - for (portSC = 0x64; portSC < 0x75; portSC += 0x04 ) { - // Get OHCI command registers - ReadMEM (ddBarAddress + portSC, AccWidthUint16, &dwVar); - if ( dwVar & BIT6 ) { - ddRetureValue = ddBarAddress + portSC; - RWMEM (ddBarAddress + portSC, AccWidthUint16, ~BIT6, 0); - for (;;) { - SbStall (5); - ReadMEM (ddBarAddress + portSC, AccWidthUint16, &dwData); - if (dwData == 0x1005) break; - } - dwData = 0; - } - } - return ddRetureValue; -} - -VOID -usbSetPllDuringS3 ( - IN AMDSBCFG* pConfig - ) -{ - UINT32 resumeEhciPortTmp; - UINT32 resumeEhciPort; - resumeEhciPortTmp = 0; - resumeEhciPort = 0; -// UINT32 ddDeviceId; -//if Force Port Resume == 1 -// { -// clear Force Port Resume; -// while (!(PORTSC == 0x1005)){wait 5 us; read PORTSC;} -// } - if (pConfig->USBMODE.UsbModeReg & BIT1) { - resumeEhciPortTmp = SetEhciPllWr (USB1_EHCI_BUS_DEV_FUN << 16, pConfig); - if (resumeEhciPortTmp > 0) resumeEhciPort = resumeEhciPortTmp; - } - if (pConfig->USBMODE.UsbModeReg & BIT3) { - resumeEhciPortTmp = SetEhciPllWr (USB2_EHCI_BUS_DEV_FUN << 16, pConfig); - if (resumeEhciPortTmp > 0) resumeEhciPort = resumeEhciPortTmp; - } - if (pConfig->USBMODE.UsbModeReg & BIT5) { - resumeEhciPortTmp = SetEhciPllWr (USB3_EHCI_BUS_DEV_FUN << 16, pConfig); - if (resumeEhciPortTmp > 0) resumeEhciPort = resumeEhciPortTmp; - } - - RWPCI ((UINT32) (USB1_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32, ~BIT29, 0); - RWPCI ((UINT32) (USB2_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32, ~BIT29, 0); - RWPCI ((UINT32) (USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32, ~BIT29, 0); - RWPCI ((UINT32) (USB4_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32, ~BIT29, 0); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF3, AccWidthUint8, 0, 0x20); - SbStall (10); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF3, AccWidthUint8, 0, 0x00); - RWPCI ((UINT32) (USB1_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32, ~BIT29, BIT29); - RWPCI ((UINT32) (USB2_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32, ~BIT29, BIT29); - RWPCI ((UINT32) (USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32, ~BIT29, BIT29); - RWPCI ((UINT32) (USB4_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32, ~BIT29, BIT29); - - if (resumeEhciPort > 0) { - RWMEM (resumeEhciPort, AccWidthUint8, ~BIT7, BIT7); - SbStall (4000); - RWMEM (resumeEhciPort, AccWidthUint8, ~BIT6, BIT6); - } - - RWPCI ((UINT32) (USB1_EHCI_BUS_DEV_FUN << 16) + 0xC4, AccWidthUint8, 0xF0, 0x03); - RWPCI ((UINT32) (USB2_EHCI_BUS_DEV_FUN << 16) + 0xC4, AccWidthUint8, 0xF0, 0x03); - RWPCI ((UINT32) (USB3_EHCI_BUS_DEV_FUN << 16) + 0xC4, AccWidthUint8, 0xF0, 0x03); - -} - diff --git a/src/vendorcode/amd/cimx/sb800/Usb.c b/src/vendorcode/amd/cimx/sb800/Usb.c new file mode 100644 index 0000000..14794cd --- /dev/null +++ b/src/vendorcode/amd/cimx/sb800/Usb.c @@ -0,0 +1,431 @@ +/** + * @file + * + * Config Southbridge USB controller + * + * Init USB features. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: CIMx-SB + * @e sub-project: + * @e $Revision:$ @e $Date:$ + * + */ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + + +#include "SBPLATFORM.h" +#include "cbtypes.h" + +// +// Declaration of local functions +// + +/** + * EhciInitAfterPciInit - Config USB controller after PCI emulation + * + * @param[in] Value Controller PCI config address (bus# + device# + function#) + * @param[in] pConfig Southbridge configuration structure pointer. + */ +VOID EhciInitAfterPciInit (IN UINT32 Value, IN AMDSBCFG* pConfig); +/** + * OhciInitAfterPciInit - Config USB OHCI controller after PCI emulation + * + * @param[in] Value Controller PCI config address (bus# + device# + function#) + * @param[in] pConfig Southbridge configuration structure pointer. + */ +VOID OhciInitAfterPciInit (IN UINT32 Value, IN AMDSBCFG* pConfig); + +/** + * SetEhciP11Wr - FIXME + * + * @param[in] Value Controller PCI config address (bus# + device# + function#) + * @param[in] pConfig Southbridge configuration structure pointer. + */ +UINT32 SetEhciPllWr (IN UINT32 Value, IN AMDSBCFG* pConfig); + + +/** + * usbInitBeforePciEnum - Config USB controller before PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +usbInitBeforePciEnum ( + IN AMDSBCFG* pConfig + ) +{ + // Disabled All USB controller + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEF, AccWidthUint8, BIT7, 0); + // Clear PM_IO 0x65[4] UsbResetByPciRstEnable, Set this bit so that usb gets reset whenever there is PCIRST. + // Enable UsbResumeEnable (USB PME) * Default value + // In SB700 USB SleepCtrl set as BIT10+BIT9, but SB800 default is BIT9+BIT8 (6 uframes) + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF0, AccWidthUint16 | S3_SAVE, ~BIT2, BIT2 + BIT7 + BIT8 + BIT9); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEF, AccWidthUint8, 0, pConfig->USBMODE.UsbModeReg); +} + +/** + * usbInitAfterPciInit - Config USB controller after PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +usbInitAfterPciInit ( + IN AMDSBCFG* pConfig + ) +{ + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGED, AccWidthUint8, ~BIT1, BIT1); + + usb1EhciInitAfterPciInit (pConfig); + usb2EhciInitAfterPciInit (pConfig); + usb3EhciInitAfterPciInit (pConfig); + usb1OhciInitAfterPciInit (pConfig); + usb2OhciInitAfterPciInit (pConfig); + usb3OhciInitAfterPciInit (pConfig); + usb4OhciInitAfterPciInit (pConfig); + + if ( pConfig->UsbPhyPowerDown ) { + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF0, AccWidthUint8, ~BIT0, BIT0); + } else + { + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF0, AccWidthUint8, ~BIT0, 0); + } + +} + +/** + * usb1EhciInitAfterPciInit - Config USB1 EHCI controller after PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +usb1EhciInitAfterPciInit ( + IN AMDSBCFG* pConfig + ) +{ + UINT32 ddDeviceId; + ddDeviceId = (USB1_EHCI_BUS_DEV_FUN << 16); + EhciInitAfterPciInit (ddDeviceId, pConfig); +} + +/** + * usb2EhciInitAfterPciInit - Config USB2 EHCI controller after PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +usb2EhciInitAfterPciInit ( + IN AMDSBCFG* pConfig + ) +{ + UINT32 ddDeviceId; + ddDeviceId = (USB2_EHCI_BUS_DEV_FUN << 16); + EhciInitAfterPciInit (ddDeviceId, pConfig); +} + +/** + * usb3EhciInitAfterPciInit - Config USB3 EHCI controller after PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +usb3EhciInitAfterPciInit ( + IN AMDSBCFG* pConfig + ) +{ + UINT32 ddDeviceId; + ddDeviceId = (USB3_EHCI_BUS_DEV_FUN << 16); + EhciInitAfterPciInit (ddDeviceId, pConfig); +} + +VOID +EhciInitAfterPciInit ( + IN UINT32 Value, + IN AMDSBCFG* pConfig + ) +{ + UINT32 ddBarAddress; + UINT32 ddVar; + //Get BAR address + ReadPCI ((UINT32) Value + SB_EHCI_REG10, AccWidthUint32, &ddBarAddress); + if ( (ddBarAddress != - 1) && (ddBarAddress != 0) ) { + //Enable Memory access + RWPCI ((UINT32) Value + SB_EHCI_REG04, AccWidthUint8, 0, BIT1); + if (pConfig->BuildParameters.EhciSsid != 0 ) { + RWPCI ((UINT32) Value + SB_EHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pConfig->BuildParameters.EhciSsid); + } + //USB Common PHY CAL & Control Register setting + ddVar = 0x00020F00; + WriteMEM (ddBarAddress + SB_EHCI_BAR_REGC0, AccWidthUint32, &ddVar); + // RPR IN AND OUT DATA PACKET FIFO THRESHOLD + // EHCI BAR 0xA4 //IN threshold bits[7:0]=0x40 //OUT threshold bits[23:16]=0x40 + RWMEM (ddBarAddress + SB_EHCI_BAR_REGA4, AccWidthUint32, 0xFF00FF00, 0x00400040); + // RPR EHCI Dynamic Clock Gating Feature + RWMEM (ddBarAddress + SB_EHCI_BAR_REGBC, AccWidthUint32, ~BIT12, 0); + // RPR Enable adding extra flops to PHY rsync path + // Step 1: + // EHCI_BAR 0xB4 [6] = 1 + // EHCI_BAR 0xB4 [7] = 0 + // EHCI_BAR 0xB4 [12] = 0 ("VLoad") + // All other bit field untouched + // Step 2: + // EHCI_BAR 0xB4[12] = 1 + RWMEM (ddBarAddress + SB_EHCI_BAR_REGB4, AccWidthUint32, ~(BIT6 + BIT7 + BIT12), 0x00); + RWMEM (ddBarAddress + SB_EHCI_BAR_REGB4, AccWidthUint32, ~BIT12, BIT12); + //Set EHCI_pci_configx50[6]='1' to disable EHCI MSI support + //RPR recommended setting "EHCI Async Park Mode" + //Set EHCI_pci_configx50[23]='0' to enable "EHCI Async Park Mode support" + //RPR Enabling EHCI Async Stop Enhancement + //Set EHCI_pci_configx50[29]='1' to disableEnabling EHCI Async Stop Enhancement + RWPCI ((UINT32) Value + SB_EHCI_REG50, AccWidthUint32 | S3_SAVE, ~(BIT23), BIT29 + BIT23 + BIT8 + BIT6); + // RPR recommended setting "EHCI Advance PHY Power Savings" + // Set EHCI_pci_configx50[31]='1' + // Fix for EHCI controller driver yellow sign issue under device manager + // when used in conjunction with HSET tool driver. EHCI PCI config 0x50[20]=1 + RWPCI ((UINT32) Value + SB_EHCI_REG50 + 2, AccWidthUint16 | S3_SAVE, (UINT16)0xFFFF, BIT15); + // RPR USB Delay A-Link Express L1 State + // RPR PING Response Fix Enable EHCI_PCI_Config x54[1] = 1 + // RPR Empty-list Detection Fix Enable EHCI_PCI_Config x54[3] = 1 + RWPCI ((UINT32) Value + SB_EHCI_REG54, AccWidthUint32 | S3_SAVE, ~BIT0, BIT0); + if ( pConfig->BuildParameters.UsbMsi) { + RWPCI ((UINT32) Value + SB_EHCI_REG50, AccWidthUint32 | S3_SAVE, ~BIT6, 0x00); + } + } +} + +/** + * usb1OhciInitAfterPciInit - Config USB1 OHCI controller after PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +usb1OhciInitAfterPciInit ( + IN AMDSBCFG* pConfig + ) +{ + UINT32 ddDeviceId; + ddDeviceId = (USB1_OHCI_BUS_DEV_FUN << 16); + OhciInitAfterPciInit (ddDeviceId, pConfig); +} + +/** + * usb2OhciInitAfterPciInit - Config USB2 OHCI controller after PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +usb2OhciInitAfterPciInit ( + IN AMDSBCFG* pConfig + ) +{ + UINT32 ddDeviceId; + ddDeviceId = (USB2_OHCI_BUS_DEV_FUN << 16); + OhciInitAfterPciInit (ddDeviceId, pConfig); +} + +/** + * usb3OhciInitAfterPciInit - Config USB3 OHCI controller after PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +usb3OhciInitAfterPciInit ( + IN AMDSBCFG* pConfig + ) +{ + UINT32 ddDeviceId; + ddDeviceId = (USB3_OHCI_BUS_DEV_FUN << 16); + OhciInitAfterPciInit (ddDeviceId, pConfig); +} + +/** + * usb4OhciInitAfterPciInit - Config USB4 OHCI controller after PCI emulation + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +usb4OhciInitAfterPciInit ( + IN AMDSBCFG* pConfig + ) +{ + UINT32 ddDeviceId; + ddDeviceId = (USB4_OHCI_BUS_DEV_FUN << 16); + OhciInitAfterPciInit (ddDeviceId, pConfig); + if (pConfig->BuildParameters.Ohci4Ssid != 0 ) { + RWPCI ((USB4_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pConfig->BuildParameters.Ohci4Ssid); + } +} + +VOID +OhciInitAfterPciInit ( + IN UINT32 Value, + IN AMDSBCFG* pConfig + ) +{ + // Disable the MSI capability of USB host controllers + RWPCI ((UINT32) Value + SB_OHCI_REG40 + 1, AccWidthUint8 | S3_SAVE, 0xFF, BIT0); + RWPCI ((UINT32) Value + SB_OHCI_REG50, AccWidthUint8 | S3_SAVE, ~(BIT5 + BIT12), 0x00); + // RPR USB SMI Handshake + RWPCI ((UINT32) Value + SB_OHCI_REG50 + 1, AccWidthUint8 | S3_SAVE, ~BIT4, 0x00); + // SB02186 + RWPCI ((UINT32) Value + SB_OHCI_REG50 + 1, AccWidthUint8 | S3_SAVE, 0xFC, 0x00); + if (Value != (USB4_OHCI_BUS_DEV_FUN << 16)) { + if ( pConfig->BuildParameters.OhciSsid != 0 ) { + RWPCI ((UINT32) Value + SB_OHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pConfig->BuildParameters.OhciSsid); + } + } + //RPR recommended setting to, enable fix to cover the corner case S3 wake up issue from some USB 1.1 devices + //OHCI 0_PCI_Config 0x50[30] = 1 + RWPCI ((UINT32) Value + SB_OHCI_REG50 + 3, AccWidthUint8 | S3_SAVE, ~BIT6, BIT6); + if ( pConfig->BuildParameters.UsbMsi) { + RWPCI ((UINT32) Value + SB_OHCI_REG40 + 1, AccWidthUint8 | S3_SAVE, ~BIT0, 0x00); + RWPCI ((UINT32) Value + SB_OHCI_REG50, AccWidthUint8 | S3_SAVE, ~BIT5, BIT5); + } +} + + +UINT32 +SetEhciPllWr ( + IN UINT32 Value, + IN AMDSBCFG* pConfig + ) +{ + UINT32 ddRetureValue; + UINT32 ddBarAddress; + UINT16 dwVar; + UINT16 dwData; + UINT8 portSC; + ddRetureValue = 0; + dwData = 0; + // Memory, and etc. + //_asm { jmp $}; + RWPCI ((UINT32) Value + 0xC4, AccWidthUint8, 0xF0, 0x00); + RWPCI ((UINT32) Value + 0x04, AccWidthUint8, 0xFF, 0x02); + // Get Bar address + ReadPCI ((UINT32) Value + 0x10, AccWidthUint32, &ddBarAddress); + for (portSC = 0x64; portSC < 0x75; portSC += 0x04 ) { + // Get OHCI command registers + ReadMEM (ddBarAddress + portSC, AccWidthUint16, &dwVar); + if ( dwVar & BIT6 ) { + ddRetureValue = ddBarAddress + portSC; + RWMEM (ddBarAddress + portSC, AccWidthUint16, ~BIT6, 0); + for (;;) { + SbStall (5); + ReadMEM (ddBarAddress + portSC, AccWidthUint16, &dwData); + if (dwData == 0x1005) break; + } + dwData = 0; + } + } + return ddRetureValue; +} + +VOID +usbSetPllDuringS3 ( + IN AMDSBCFG* pConfig + ) +{ + UINT32 resumeEhciPortTmp; + UINT32 resumeEhciPort; + resumeEhciPortTmp = 0; + resumeEhciPort = 0; +// UINT32 ddDeviceId; +//if Force Port Resume == 1 +// { +// clear Force Port Resume; +// while (!(PORTSC == 0x1005)){wait 5 us; read PORTSC;} +// } + if (pConfig->USBMODE.UsbModeReg & BIT1) { + resumeEhciPortTmp = SetEhciPllWr (USB1_EHCI_BUS_DEV_FUN << 16, pConfig); + if (resumeEhciPortTmp > 0) resumeEhciPort = resumeEhciPortTmp; + } + if (pConfig->USBMODE.UsbModeReg & BIT3) { + resumeEhciPortTmp = SetEhciPllWr (USB2_EHCI_BUS_DEV_FUN << 16, pConfig); + if (resumeEhciPortTmp > 0) resumeEhciPort = resumeEhciPortTmp; + } + if (pConfig->USBMODE.UsbModeReg & BIT5) { + resumeEhciPortTmp = SetEhciPllWr (USB3_EHCI_BUS_DEV_FUN << 16, pConfig); + if (resumeEhciPortTmp > 0) resumeEhciPort = resumeEhciPortTmp; + } + + RWPCI ((UINT32) (USB1_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32, ~BIT29, 0); + RWPCI ((UINT32) (USB2_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32, ~BIT29, 0); + RWPCI ((UINT32) (USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32, ~BIT29, 0); + RWPCI ((UINT32) (USB4_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32, ~BIT29, 0); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF3, AccWidthUint8, 0, 0x20); + SbStall (10); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF3, AccWidthUint8, 0, 0x00); + RWPCI ((UINT32) (USB1_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32, ~BIT29, BIT29); + RWPCI ((UINT32) (USB2_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32, ~BIT29, BIT29); + RWPCI ((UINT32) (USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32, ~BIT29, BIT29); + RWPCI ((UINT32) (USB4_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32, ~BIT29, BIT29); + + if (resumeEhciPort > 0) { + RWMEM (resumeEhciPort, AccWidthUint8, ~BIT7, BIT7); + SbStall (4000); + RWMEM (resumeEhciPort, AccWidthUint8, ~BIT6, BIT6); + } + + RWPCI ((UINT32) (USB1_EHCI_BUS_DEV_FUN << 16) + 0xC4, AccWidthUint8, 0xF0, 0x03); + RWPCI ((UINT32) (USB2_EHCI_BUS_DEV_FUN << 16) + 0xC4, AccWidthUint8, 0xF0, 0x03); + RWPCI ((UINT32) (USB3_EHCI_BUS_DEV_FUN << 16) + 0xC4, AccWidthUint8, 0xF0, 0x03); + +} + diff --git a/src/vendorcode/amd/cimx/sb900/Makefile.inc b/src/vendorcode/amd/cimx/sb900/Makefile.inc index 8d753d1..8cdc4b1 100644 --- a/src/vendorcode/amd/cimx/sb900/Makefile.inc +++ b/src/vendorcode/amd/cimx/sb900/Makefile.inc @@ -33,7 +33,7 @@ romstage-y += Pmio2Lib.c romstage-y += Sata.c romstage-y += SbCmn.c romstage-y += SbMain.c -romstage-y += SBPort.c +romstage-y += SbPort.c romstage-y += MemLib.c romstage-y += PciLib.c romstage-y += IoLib.c @@ -58,7 +58,7 @@ ramstage-y += Pmio2Lib.c ramstage-y += Sata.c ramstage-y += SbCmn.c ramstage-y += SbMain.c -ramstage-y += SBPort.c +ramstage-y += SbPort.c ramstage-y += MemLib.c ramstage-y += PciLib.c ramstage-y += IoLib.c diff --git a/src/vendorcode/amd/cimx/sb900/SBPort.c b/src/vendorcode/amd/cimx/sb900/SBPort.c deleted file mode 100644 index 90e878e..0000000 --- a/src/vendorcode/amd/cimx/sb900/SBPort.c +++ /dev/null @@ -1,737 +0,0 @@ - -/** - * @file - * - * Southbridge Init during POWER-ON - * - * Prepare Southbridge environment during power on stage. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: CIMx-SB - * @e sub-project: - * @e $Revision:$ @e $Date:$ - * - */ -/*;******************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;*********************************************************************************/ - -#include "SbPlatform.h" -#include "cbtypes.h" -#include "AmdSbLib.h" -#include "Hudson-2.h" - -/** - * sbPorInitPciTable - PCI device registers initial during the power on stage. - * - * - * - * - */ -REG8MASK sbPorInitPciTable[] = -{ - // SATA device - {0x00, SATA_BUS_DEV_FUN, 0}, - {SB_SATA_REG84 + 3, ~BIT2, 0}, - {SB_SATA_REGA0, ~(BIT2 + BIT3 + BIT4 + BIT5 + BIT6), BIT2 + BIT3 + BIT4 + BIT5}, - {0xFF, 0xFF, 0xFF}, - // LPC Device (Bus 0, Dev 20, Func 3) - {0x00, LPC_BUS_DEV_FUN, 0}, - {SB_LPC_REG44, 0xFF, BIT6 + BIT7}, //Enable COM1 and COM2 - {SB_LPC_REG47, 0xFF, BIT5}, - {SB_LPC_REG48, 0x00, BIT0 + BIT1 + BIT2}, - {SB_LPC_REG7C, 0x00, BIT0 + BIT2}, - {SB_LPC_REG78, 0xF0, BIT2 + BIT3}, // Enable LDRQ pin - {SB_LPC_REGBB, 0xFF, BIT3 + BIT4 + BIT5}, - // A12 set 0xBB [5:3] = 111 to improve SPI timing margin. - // A12 Set 0xBA [6:5] = 11 improve SPI timing margin. (SPI Prefetch enhancement) - {SB_LPC_REGBB, 0xBE, BIT0 + BIT3 + BIT4 + BIT5}, - {SB_LPC_REGBA, 0x9F, BIT5 + BIT6}, - {SB_LPC_REGA4, ~ BIT0, BIT0}, //[BUG Fix] Force EC_PortActive to 1 to fix possible IR non function issue when NO_EC_SUPPORT is defined - {0xFF, 0xFF, 0xFF}, - // P2P Bridge (Bus 0, Dev 20, Func 4) - {0x00, PCIB_BUS_DEV_FUN, 0}, - {SB_PCIB_REG4B, 0xFF, BIT6 + BIT7 + BIT4}, - // ENH230012: Disable P2P bridge decoder for IO address 0x1000-0x1FFF in SBPOR - // ENH260809: Add PCI port 80 support in Hudson-2/3 -#ifdef SB_PCIB_PORT_80_SUPPORT - {SB_PCIB_REG1C, 0x00, 0xF0}, - {SB_PCIB_REG1D, 0x00, 0x00}, - {SB_PCIB_REG04, 0x00, 0x21}, -#endif - {SB_PCIB_REG40, 0xDF, 0x20}, - {SB_PCIB_REG50, 0x02, 0x01}, - {0xFF, 0xFF, 0xFF}, -}; - -/** - * sbPmioPorInitTable - Southbridge ACPI MMIO initial during the power on stage. - * - * - * - * - */ -AcpiRegWrite sbPmioPorInitTable[] = -{ - {00, 00, 0xB0, 0xAC}, // Signature - {MISC_BASE >> 8, SB_MISC_REG41, 0x1F, 0x40}, //keep Auxiliary_14Mclk_Sel [12] - //RPR 8.9 USB 3.0 Reference Clock MISC_REG 0x40 [4] = 0 Enable spread-spectrum reference clock. - {MISC_BASE >> 8, SB_MISC_REG40, 0xEF, 0x00}, -// {MISC_BASE >> 8, 0x24 + 2, 0xFF, 0x20}, Testing CPU clk strength - {PMIO_BASE >> 8, SB_PMIOA_REG5D, 0x00, BIT0}, - {PMIO_BASE >> 8, SB_PMIOA_REGD2, 0xCF, BIT4 + BIT5}, - {SMBUS_BASE >> 8, SB_SMBUS_REG12, 0x00, BIT0}, - {PMIO_BASE >> 8, SB_PMIOA_REG28, 0xFF, BIT0 + BIT2}, - {PMIO_BASE >> 8, SB_PMIOA_REG44 + 3, 0x67, BIT7 + BIT3}, // 2.5 Enable Boot Timer - {PMIO_BASE >> 8, SB_PMIOA_REG48, 0xFF, BIT0}, - {PMIO_BASE >> 8, SB_PMIOA_REG00, 0xFF, 0x0E}, - {PMIO_BASE >> 8, SB_PMIOA_REG00 + 2, 0xFF, 0x40}, - {PMIO_BASE >> 8, SB_PMIOA_REG00 + 3, 0xFF, 0x08}, - {PMIO_BASE >> 8, SB_PMIOA_REG34, 0xEF, BIT0 + BIT1}, - {PMIO_BASE >> 8, SB_PMIOA_REGEC, 0xFD, BIT1}, - //{PMIO_BASE >> 8, SB_PMIOA_REG5B, 0xF9, BIT1 + BIT2}, - {PMIO_BASE >> 8, SB_PMIOA_REG08, 0xFE, BIT2 + BIT4}, - {PMIO_BASE >> 8, SB_PMIOA_REG08 + 1, 0xFF, BIT0}, - {PMIO_BASE >> 8, SB_PMIOA_REG54, 0x00, BIT4 + BIT6 + BIT7}, - {PMIO_BASE >> 8, SB_PMIOA_REG04 + 3, 0xFD, BIT1}, - {PMIO_BASE >> 8, SB_PMIOA_REG74, 0xF6, BIT0 + BIT3}, - {PMIO_BASE >> 8, SB_PMIOA_REGF0, ~BIT2, 0x00}, - // RPR GEC I/O Termination Setting - // PM_Reg 0xF6 = Power-on default setting - // PM_Reg 0xF7 = Power-on default setting - // PM_Reg 0xF8 = 0x6C - // PM_Reg 0xF9 = 0x21 - // PM_Reg 0xFA = 0x00 Hudson-2 A12 GEC I/O Pad settings for 3.3V CMOS - {PMIO_BASE >> 8, SB_PMIOA_REGF8, 0x00, 0x6C}, - {PMIO_BASE >> 8, SB_PMIOA_REGF8 + 1, 0x00, 0x07}, - {PMIO_BASE >> 8, SB_PMIOA_REGF8 + 2, 0x00, 0x00}, - // PRP GEC -end - {PMIO_BASE >> 8, SB_PMIOA_REGC4, 0xee, 0x04}, // Release NB_PCIE_RST - {PMIO_BASE >> 8, SB_PMIOA_REGC0 + 2, 0xBF, 0x40}, - - {PMIO_BASE >> 8, SB_PMIOA_REGBE, 0xDF, BIT5}, - - //OBS200280 - //{PMIO_BASE >> 8, SB_PMIOA_REGBE, 0xFF, BIT1}, - - - {0xFF, 0xFF, 0xFF, 0xFF}, -}; - -/** - * sbPowerOnInit - Config Southbridge during power on stage. - * - * - * - * @param[in] pConfig Southbridge configuration structure pointer. - * - */ -VOID -sbPowerOnInit ( - IN AMDSBCFG* pConfig - ) -{ - UINT8 dbPortStatus; - //UINT8 dbSysConfig; - UINT32 abValue; - UINT32 abValue2; - UINT8 dbValue; - UINT8 dbEfuse; - UINT32 dbSpiMode; - UINT16 dwAsfPort; - UINT16 smbusBase; - UINT8 cimSataMode; -// UINT8 cimSpiFastReadEnable; -// UINT8 cimSpiFastReadSpeed; - UINT8 cimSataInternal100Spread; - UINT8 indexValue; - UINT32 ddValue; - UINT8 SataPortNum; - UINT8 XhciEfuse; - XhciEfuse = XHCI_EFUSE_LOCATION; - - cimSataMode = pConfig->SATAMODE.SataModeReg; -// if (pConfig->BuildParameters.SpiFastReadEnable != NULL ) { -// cimSpiFastReadEnable = (UINT8) pConfig->BuildParameters.SpiFastReadEnable; -// } else { -// cimSpiFastReadEnable = cimSpiFastReadEnableDefault; -// } -// cimSpiFastReadSpeed = (UINT8) pConfig->BuildParameters.SpiFastReadSpeed; - cimSataInternal100Spread = ( UINT8 ) pConfig->SataInternal100Spread; - -#if SB_CIMx_PARAMETER == 0 - cimSataMode = (UINT8) ((cimSataMode & 0xFB) | cimSataSetMaxGen2Default); - cimSataMode = (UINT8) ((cimSataMode & 0x0F) | cimSataClkModeDefault); - cimSpiFastReadEnable = cimSpiFastReadEnableDefault; - cimSpiFastReadSpeed = cimSpiFastReadSpeedDefault; - cimSataInternal100Spread = SataInternal100SpreadDefault; -#endif - - TRACE ((DMSG_SB_TRACE, "CIMx - Entering sbPowerOnInit \n")); - -// Hudson-2 Only Enabled (Mmio_mem_enablr) // Default value is correct - RWPMIO (SB_PMIOA_REG24, AccWidthUint8, 0xFF, BIT0); - - RWPMIO (0xD3, AccWidthUint8, ~BIT4, 0); - RWPMIO (0xD3, AccWidthUint8, ~BIT4, BIT4); - - if ( pConfig->Cg2Pll == 1 ) { - TurnOffCG2 (); - pConfig->SATAMODE.SataMode.SataClkMode = 0x0a; - } - - //enable CF9 - RWPMIO (0xD2, AccWidthUint8, ~BIT6, 0); - -// Set A-Link bridge access address. This address is set at device 14h, function 0, -// register 0f0h. This is an I/O address. The I/O address must be on 16-byte boundary. - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGE0, AccWidthUint32, 00, ALINK_ACCESS_INDEX); - writeAlink (0x80000004, 0x04); // RPR 4.2 Enable Hudson-2 to issue memory read/write requests in the upstream direction - abValue = readAlink (SB_ABCFG_REG9C | (UINT32) (ABCFG << 29)); // RPR 4.5 Disable the credit variable in the downstream arbitration equation - abValue = abValue | BIT0; - writeAlink (SB_ABCFG_REG9C | (UINT32) (ABCFG << 29), abValue); - writeAlink (0x30, 0x10); // AXINDC 0x10[9]=1, Enabling Non-Posted memory write for K8 platform. - writeAlink (0x34, readAlink (0x34) | BIT9); - rwAlink (SB_ABCFG_REG10050 | (UINT32) (ABCFG << 29), ~BIT2, 0x00); - - // Enable external Stickybit register reset feature - //writeAlink (SB_AX_INDXC_REG30 | (UINT32) (AXINDC << 29), 0x30); - //abValue = readAlink (SB_AX_DATAC_REG34 | (UINT32) (AXINDC << 29)); - //abValue |= BIT6 + BIT5; - //writeAlink (SB_AX_DATAC_REG34 | (UINT32) (AXINDC << 29), abValue); - - // Configure UMI target link speed - dbEfuse = PCIE_FORCE_GEN1_EFUSE_LOCATION; - getEfuseStatus (&dbEfuse); - if ( dbEfuse & BIT0 ) { - pConfig->NbSbGen2 = 0; - } - - dbEfuse = FCH_Variant_EFUSE_LOCATION; - getEfuseStatus (&dbEfuse); - if ((dbEfuse == 0x07) || (dbEfuse == 0x08)) { - pConfig->NbSbGen2 = 0; - } - - if (pConfig->NbSbGen2) { - abValue = 2; - abValue2 = BIT0; - } else { - abValue = 1; - abValue2 = 0; - } - rwAlink (SB_AX_INDXP_REGA4, 0xFFFFFFFE, abValue2); - rwAlink ((UINT32)SB_AX_CFG_REG88, 0xFFFFFFF0, abValue); - - if (pConfig->sdbEnable) { - rwAlink (SB_ABCFG_REGC0 | (UINT32) (ABCFG << 29), ~BIT12, 0x00); - RWMEM (ACPI_MMIO_BASE + SERIAL_DEBUG_BASE + 0, AccWidthUint8, 0, pConfig->Debug_Reg00); - RWMEM (ACPI_MMIO_BASE + SERIAL_DEBUG_BASE + 2, AccWidthUint8, 0, pConfig->Debug_Reg02); - RWMEM (ACPI_MMIO_BASE + SERIAL_DEBUG_BASE + 4, AccWidthUint8, 0, pConfig->Debug_Reg04); - RWMEM (ACPI_MMIO_BASE + SERIAL_DEBUG_BASE + 1, AccWidthUint8, 0, pConfig->Debug_Reg01); - RWMEM (ACPI_MMIO_BASE + SERIAL_DEBUG_BASE + 3, AccWidthUint8, 0, pConfig->Debug_Reg03); - RWMEM (ACPI_MMIO_BASE + SERIAL_DEBUG_BASE + 5, AccWidthUint8, 0, pConfig->Debug_Reg05); - } - -// Set Build option into SB - WritePCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG64, AccWidthUint16 | S3_SAVE, &(pConfig->BuildParameters.SioPmeBaseAddress)); - RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA0, AccWidthUint32 | S3_SAVE, 0x001F, (pConfig->BuildParameters.SpiRomBaseAddress)); - RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG9C, AccWidthUint32 | S3_SAVE, 0, (pConfig->BuildParameters.GecShadowRomBase + 1)); -// Enabled SMBUS0/SMBUS1 (ASF) Base Address - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG2C, AccWidthUint16, 06, (pConfig->BuildParameters.Smbus0BaseAddress) + BIT0); //protect BIT[2:1] - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG28, AccWidthUint16, 06, (pConfig->BuildParameters.Smbus1BaseAddress) + BIT0); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG60, AccWidthUint16, 00, (pConfig->BuildParameters.AcpiPm1EvtBlkAddr)); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG62, AccWidthUint16, 00, (pConfig->BuildParameters.AcpiPm1CntBlkAddr)); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG64, AccWidthUint16, 00, (pConfig->BuildParameters.AcpiPmTmrBlkAddr)); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG66, AccWidthUint16, 00, (pConfig->BuildParameters.CpuControlBlkAddr)); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG68, AccWidthUint16, 00, (pConfig->BuildParameters.AcpiGpe0BlkAddr)); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG6A, AccWidthUint16, 00, (pConfig->BuildParameters.SmiCmdPortAddr)); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG6C, AccWidthUint16, 00, (pConfig->BuildParameters.AcpiPmaCntBlkAddr)); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG6E, AccWidthUint16, 00, (pConfig->BuildParameters.SmiCmdPortAddr) + 8); - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG48, AccWidthUint32, 00, (pConfig->BuildParameters.WatchDogTimerBase)); - - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG2E, AccWidthUint8, ~(BIT1 + BIT2), 0); //clear BIT[2:1] - smbusBase = (UINT16) (pConfig->BuildParameters.Smbus0BaseAddress); - dbValue = 0x00; - WriteIO (smbusBase + 0x14, AccWidthUint8, &dbValue); - - dbEfuse = SATA_FIS_BASE_EFUSE_LOC; - getEfuseStatus (&dbEfuse); - - programSbAcpiMmioTbl ((AcpiRegWrite*) FIXUP_PTR (&sbPmioPorInitTable[0])); - - //RPR 3.4 Enabling ClkRun Function - RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGBB, AccWidthUint8, ~ BIT2, BIT2); - //BUG265683: Mismatch clkrun enable register setting between RPR and CIMX code - RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGD0, AccWidthUint8, ~ BIT2, 0); - - SataPortNum = 0; - for ( SataPortNum = 0; SataPortNum < 0x06; SataPortNum++ ) { - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8, 0xFF, 1 << SataPortNum); - SbStall (2); - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8, (0xFF ^ (1 << SataPortNum)) , 0x00); - SbStall (2); - } - - dbValue = 0x0A; - WriteIO (SB_IOMAP_REG70, AccWidthUint8, &dbValue); - ReadIO (SB_IOMAP_REG71, AccWidthUint8, &dbValue); - dbValue &= 0xEF; - WriteIO (SB_IOMAP_REG71, AccWidthUint8, &dbValue); - - RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG00, AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, (BIT19 + BIT24 + BIT25 + BIT26)); - RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG0C, AccWidthUint32 | S3_SAVE, 0xFFC0FFFF, 0 ); - if (pConfig->BuildParameters.SpiSpeed) { - RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG0C, AccWidthUint32 | S3_SAVE, ~(BIT13 + BIT12), ((pConfig->BuildParameters.SpiSpeed - 1 ) << 12)); - } - if (pConfig->BuildParameters.SpiFastSpeed) { - RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG0C, AccWidthUint32 | S3_SAVE, ~(BIT15 + BIT14), ((pConfig->BuildParameters.SpiFastSpeed - 1 ) << 14)); - } - //if (pConfig->BuildParameters.SpiBurstWrite) { - RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG1C, AccWidthUint32 | S3_SAVE, ~(BIT10), ((pConfig->BuildParameters.SpiBurstWrite) << 10)); - //} - dbSpiMode = pConfig->BuildParameters.SpiMode; - if (pConfig->BuildParameters.SpiMode) { - if ((dbSpiMode == SB_SPI_MODE_QUAL_114) || (dbSpiMode == SB_SPI_MODE_QUAL_112) || (dbSpiMode == SB_SPI_MODE_QUAL_144) || (dbSpiMode == SB_SPI_MODE_QUAL_122)) { - // RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG00, AccWidthUint32 | S3_SAVE, 0xFFFF0000, 0x013e); - // RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG0C, AccWidthUint32 | S3_SAVE, 0xFFFFFF00, 0x80 ); - // RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG00, AccWidthUint32 | S3_SAVE, 0xFFFEFFFF, 0x10000); - // SbStall (1000); - } - RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG00, AccWidthUint32 | S3_SAVE, ~( BIT18 + BIT29 + BIT30), ((pConfig->BuildParameters.SpiMode & 1) << 18) + ((pConfig->BuildParameters.SpiMode & 6) << 28)); - } - -// if ( cimSpiFastReadSpeed ) { -// RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG0C, AccWidthUint16 | S3_SAVE, ~(BIT15 + BIT14), ( cimSpiFastReadSpeed << 14)); -// } - //Program power on pci init table - programPciByteTable ( (REG8MASK*) FIXUP_PTR (&sbPorInitPciTable[0]), sizeof (sbPorInitPciTable) / sizeof (REG8MASK) ); - - programSbAcpiMmioTbl ((AcpiRegWrite *) (pConfig->OEMPROGTBL.OemProgrammingTablePtr_Ptr)); - - RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG6C, AccWidthUint32 | S3_SAVE, 0xFFFFFF00, 0); - - if (pConfig->SATAMODE.SataModeReg == 0) { - pConfig->SATAMODE.SataModeReg = (pConfig->SATAMODE.SataMode.SataController << 0) \ - + (pConfig->SATAMODE.SataMode.SataIdeCombMdPriSecOpt << 1) \ - + (pConfig->SATAMODE.SataMode.SataSetMaxGen2 << 2) \ - + (pConfig->SATAMODE.SataMode.SataIdeCombinedMode << 3) \ - + (pConfig->SATAMODE.SataMode.SataClkMode << 4); - } - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGDA, AccWidthUint8, 0x00, pConfig->SATAMODE.SataModeReg); - - if (dbEfuse & BIT0) { - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGDA, AccWidthUint8, 0xFB, 0x04); - } - - ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGDA, AccWidthUint8, &dbPortStatus); - if ( ((dbPortStatus & 0xF0) == 0x10) ) { - RWMEM (ACPI_MMIO_BASE + MISC_BASE + SB_PMIOA_REG08, AccWidthUint8, 0, BIT5); - } - - if ( pConfig->BuildParameters.LegacyFree ) { - RWPCI (((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG44), AccWidthUint32 | S3_SAVE, 00, 0x0003C000); - } else { - RWPCI (((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG44), AccWidthUint32 | S3_SAVE, 00, 0xFF03FFD5); - } - - if ( cimSataInternal100Spread ) { - RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x1E, AccWidthUint8, 0xFF, BIT4); - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG84), AccWidthUint32, 0xFFFFFFFB, 0x00); - } else { - RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x1E, AccWidthUint8, ~BIT4, 0x00); - } - // Toggle GEVENT4 to reset all GPP devices - sbGppTogglePcieReset (pConfig); - - if ( cimSataInternal100Spread ) { - RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG84), AccWidthUint32, 0xFFFFFFFF, 0x04); - } - - dbValue = 0x08; - WriteIO (SB_IOMAP_REGC00, AccWidthUint8, &dbValue); - ReadIO (SB_IOMAP_REGC01, AccWidthUint8, &dbValue); - if ( !pConfig->BuildParameters.EcKbd ) { - // Route SIO IRQ1/IRQ12 to USB IRQ1/IRQ12 input - dbValue = dbValue | 0x0A; - } - WriteIO (SB_IOMAP_REGC01, AccWidthUint8, &dbValue); - - dbValue = 0x09; - WriteIO (SB_IOMAP_REGC00, AccWidthUint8, &dbValue); - ReadIO (SB_IOMAP_REGC01, AccWidthUint8, &dbValue); - if ( !pConfig->BuildParameters.EcKbd ) { - // Route SIO IRQ1/IRQ12 to USB IRQ1/IRQ12 input - dbValue = dbValue & 0xF9; - } - if ( pConfig->BuildParameters.LegacyFree ) { - // Disable IRQ1/IRQ12 filter enable for Legacy free with USB KBC emulation. - dbValue = dbValue & 0x9F; - } - // Enabled IRQ input - dbValue = dbValue | BIT4; - WriteIO (SB_IOMAP_REGC01, AccWidthUint8, &dbValue); - - dwAsfPort = ((UINT16) pConfig->BuildParameters.Smbus1BaseAddress & 0xFFF0); - if ( dwAsfPort != 0 ) { - RWIO (dwAsfPort + 0x0E, AccWidthUint8, 0x0, 0x70); // 0x70 will change to EQU ( Remote control address) - } - -#ifndef NO_EC_SUPPORT - getChipSysMode (&dbPortStatus); - if ( ((dbPortStatus & ChipSysEcEnable) == 0x00) ) { - // EC is disabled by jumper setting or board config - RWPCI (((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4), AccWidthUint16 | S3_SAVE, 0xFFFE, BIT0); - } else { - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC4, AccWidthUint8, 0xF7, 0x08); - ecPowerOnInit ( pConfig); - imcSleep ( pConfig); - } -#endif - - - ReadPCI ((USB_XHCI_BUS_DEV_FUN << 16) + 0x00, AccWidthUint32, &ddValue); - ReadPCI ((USB_XHCI_BUS_DEV_FUN << 16) + 0x00, AccWidthUint32, &ddValue); - if ( ddValue == 0x78121022 ) { -// -// First Xhci controller. -// - ReadPCI ((USB_XHCI_BUS_DEV_FUN << 16) + 0x00, AccWidthUint32, &ddValue); - ddValue = 0; - indexValue = XHCI_REGISTER_BAR03; - WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); - ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); - ddValue = (UINT32) dbValue; - - indexValue = XHCI_REGISTER_BAR02; - WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); - ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); - ddValue <<= 8; - ddValue |= (UINT32) dbValue; - - indexValue = XHCI_REGISTER_BAR01; - WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); - ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); - ddValue <<= 8; - ddValue |= (UINT32) dbValue; - - indexValue = XHCI_REGISTER_BAR00; - WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); - ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); - ddValue <<= 8; - ddValue |= (UINT32) dbValue; - WritePCI ((USB_XHCI_BUS_DEV_FUN << 16) + 0x10, AccWidthUint32, &ddValue); - - indexValue = XHCI_REGISTER_04H; - WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); - ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); - WritePCI ((USB_XHCI_BUS_DEV_FUN << 16) + 0x04, AccWidthUint8, &dbValue); - - indexValue = XHCI_REGISTER_0CH; - WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); - ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); - WritePCI ((USB_XHCI_BUS_DEV_FUN << 16) + 0x0C, AccWidthUint8, &dbValue); - - indexValue = XHCI_REGISTER_3CH; - WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); - ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); - WritePCI ((USB_XHCI_BUS_DEV_FUN << 16) + 0x3C, AccWidthUint8, &dbValue); -// -// Second Xhci controller. -// - ReadPCI ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x00, AccWidthUint32, &ddValue); - ddValue = 0; - indexValue = XHCI1_REGISTER_BAR03; - WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); - ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); - ddValue = (UINT32) dbValue; - - indexValue = XHCI1_REGISTER_BAR02; - WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); - ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); - ddValue <<= 8; - ddValue |= (UINT32) dbValue; - - indexValue = XHCI1_REGISTER_BAR01; - WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); - ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); - ddValue <<= 8; - ddValue |= (UINT32) dbValue; - - indexValue = XHCI1_REGISTER_BAR00; - WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); - ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); - ddValue <<= 8; - ddValue |= (UINT32) dbValue; - WritePCI ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x10, AccWidthUint32, &ddValue); - - indexValue = XHCI1_REGISTER_04H; - WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); - ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); - WritePCI ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x04, AccWidthUint8, &dbValue); - - indexValue = XHCI1_REGISTER_0CH; - WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); - ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); - WritePCI ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x0C, AccWidthUint8, &dbValue); - - indexValue = XHCI1_REGISTER_3CH; - WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); - ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); - WritePCI ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x3C, AccWidthUint8, &dbValue); - } - // RPR 3.2 Enabling SPI ROM Prefetch - // Set LPC cfg 0xBA bit 8 - RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGBA, AccWidthUint16 | S3_SAVE, 0xFFFF, BIT8); - if (IsSbA12Plus ()) { - // Enable SPI Prefetch for USB, set LPC cfg 0xBA bit 7 to 1 for A12 and above - RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGBA, AccWidthUint16 | S3_SAVE, 0xFFFF, BIT7); - } -#ifdef XHCI_SUPPORT -#ifdef XHCI_INIT_IN_ROM_SUPPORT - if ( pConfig->XhciSwitch == 1 ) { - if ( pConfig->S3Resume == 0 ) { - XhciEarlyInit (); - } else { - XhciInitIndirectReg (); - } - } else { - // for power saving. - - // add Efuse checking for Xhci enable/disable - getEfuseStatus (&XhciEfuse); - if ((XhciEfuse & (BIT0 + BIT1)) != (BIT0 + BIT1)) { - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccWidthUint32, 0xF0FFFBFF, 0x0); - } - } -#endif -#endif -} - -#ifdef XHCI_SUPPORT -VOID -XhciInitIndirectReg ( - ) -{ - UINT32 ddDrivingStrength; - UINT32 port; - ddDrivingStrength = 0; - port = 0; -#ifdef SB_USB_BATTERY_CHARGE_SUPPORT - RWXhciIndReg ( 0x40000018, 0xFFFFFFFF, 0x00000030); -#endif -// -// RPR SuperSpeed PHY Configuration (adaptation mode setting) -// - RWXhciIndReg ( SB_XHCI_IND_REG94, 0xFFFFFC00, 0x00000021); - RWXhciIndReg ( SB_XHCI_IND_REGD4, 0xFFFFFC00, 0x00000021); -// -// RPR SuperSpeed PHY Configuration (CR phase and frequency filter settings) -// - RWXhciIndReg ( SB_XHCI_IND_REG98, 0xFFFFFFC0, 0x0000000A); - RWXhciIndReg ( SB_XHCI_IND_REGD8, 0xFFFFFFC0, 0x0000000A); - -// -// RPR BLM Meaasge -// - RWXhciIndReg ( SB_XHCI_IND_REG00, 0xF8FFFFFF, 0x07000000); -// -// RPR 8.13 xHCI USB 2.0 PHY Settings -// Step 1 is done by hardware default -// Step 2 -#ifdef USB3_EHCI_DRIVING_STRENGTH - for (port = 0; port < 4; port ++) { - ddDrivingStrength = (USB3_EHCI_DRIVING_STRENGTH >> (port * 4)) & 0xF; - if (ddDrivingStrength & BIT3) { - ddDrivingStrength &= 0x07; - if (port < 2) { - RWXhci0IndReg ( SB_XHCI_IND60_REG00, 0xFFFE0FF8, (port << 13) + ddDrivingStrength); - RWXhci0IndReg ( SB_XHCI_IND60_REG00, 0xFFFFEFFF, 0x00001000); - } else { - RWXhci1IndReg ( SB_XHCI_IND60_REG00, 0xFFFE0FF8, (port << 13) + ddDrivingStrength); - RWXhci1IndReg ( SB_XHCI_IND60_REG00, 0xFFFFEFFF, 0x00001000); - } - } - } -#endif - -// Step 3 - if (IsSbA11 ()) { - RWXhciIndReg ( SB_XHCI_IND60_REG0C, ~ ((UINT32) (0x0f << 8)), ((UINT32) (0x00 << 8))); - RWXhciIndReg ( SB_XHCI_IND60_REG08, ~ ((UINT32) (0xff << 8)), ((UINT32) (0x15 << 8))); - } else { - RWXhciIndReg ( SB_XHCI_IND60_REG0C, ~ ((UINT32) (0x0f << 8)), ((UINT32) (0x02 << 8))); - RWXhciIndReg ( SB_XHCI_IND60_REG08, ~ ((UINT32) (0xff << 8)), ((UINT32) (0x0f << 8))); - } -} - -VOID -XhciEarlyInit ( - ) -{ - UINT16 BcdAddress; - UINT16 BcdSize; - UINT16 AcdAddress; - UINT16 AcdSize; - UINT16 FwAddress; - UINT16 FwSize; - UINTN XhciFwStarting; - UINT32 SpiValidBase; - UINT32 RegData; - UINT16 i; - - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccWidthUint32, 0x00000000, 0x00400700); - SbStall (20); -// -// Get ROM SIG starting address for USB firmware starting address (offset 0x0C to SIG address) -// - GetRomSigPtr (&XhciFwStarting); - - if (XhciFwStarting == 0) { - return; - } - - XhciFwStarting = ACPIMMIO32 (XhciFwStarting + FW_TO_SIGADDR_OFFSET); - if (IsLpcRom ()) { - //XHCI firmware re-load - RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGCC, AccWidthUint32 | S3_SAVE, ~BIT2, (BIT2 + BIT1 + BIT0)); - RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGCC, AccWidthUint32 | S3_SAVE, 0x00000FFF, (UINT32) (XhciFwStarting)); - } -// -// RPR Enable SuperSpeed receive special error case logic. 0x20 bit8 -// RPR Enable USB2.0 RX_Valid Synchronization. 0x20 bit9 -// Enable USB2.0 DIN/SE0 Synchronization. 0x20 bit10 -// - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG20, AccWidthUint32, 0xFFFFF8FF, 0x00000700); -// -// RPR SuperSpeed PHY Configuration (adaptation timer setting) -// - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG90, AccWidthUint32, 0xFFF00000, 0x000AAAAA); - //RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG90 + 0x40, AccWidthUint32, 0xFFF00000, 0x000AAAAA); - -// -// Step 1. to enable Xhci IO and Firmware load mode -// - -#ifdef XHCI_SUPPORT_ONE_CONTROLLER - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccWidthUint32, 0xF0FFFFFC, 0x00000001); -#else - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccWidthUint32, 0xF0FFFFFC, 0x00000003); -#endif - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccWidthUint32, 0xEFFFFFFF, 0x10000000); - -// -// Step 2. to read a portion of the USB3_APPLICATION_CODE from BIOS ROM area and program certain registers. -// - - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGA0, AccWidthUint32, 0x00000000, (SPI_HEAD_LENGTH << 16)); - - BcdAddress = ACPIMMIO16 (XhciFwStarting + BCD_ADDR_OFFSET); - BcdSize = ACPIMMIO16 (XhciFwStarting + BCD_SIZE_OFFSET); - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGA4, AccWidthUint16, 0x0000, BcdAddress); - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGA4 + 2, AccWidthUint16, 0x0000, BcdSize); - - AcdAddress = ACPIMMIO16 (XhciFwStarting + ACD_ADDR_OFFSET); - AcdSize = ACPIMMIO16 (XhciFwStarting + ACD_SIZE_OFFSET); - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGA8, AccWidthUint16, 0x0000, AcdAddress); - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGA8 + 2, AccWidthUint16, 0x0000, AcdSize); - - SpiValidBase = SPI_BASE2 (XhciFwStarting + 4) | SPI_BAR0_VLD | SPI_BASE0 | SPI_BAR1_VLD | SPI_BASE1 | SPI_BAR2_VLD; - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGB0, AccWidthUint32, 0x00000000, SpiValidBase); - - // - // Copy Type0/1/2 data block from ROM image to MMIO starting from 0xC0 - // - for (i = 0; i < SPI_HEAD_LENGTH; i++) { - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGC0 + i, AccWidthUint8, 0, ACPIMMIO8 (XhciFwStarting + i)); - } - - for (i = 0; i < BcdSize; i++) { - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGC0 + SPI_HEAD_LENGTH + i, AccWidthUint8, 0, ACPIMMIO8 (XhciFwStarting + BcdAddress + i)); - } - - for (i = 0; i < AcdSize; i++) { - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGC0 + SPI_HEAD_LENGTH + BcdSize + i, AccWidthUint8, 0, ACPIMMIO8 (XhciFwStarting + AcdAddress + i)); - } - -// -// Step 3. to enable the instruction RAM preload functionality. -// - FwAddress = ACPIMMIO16 (XhciFwStarting + FW_ADDR_OFFSET); - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGB4, AccWidthUint16, 0x0000, ACPIMMIO16 (XhciFwStarting + FwAddress)); - FwAddress += 2; - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG04, AccWidthUint16, 0x0000, FwAddress); - - FwSize = ACPIMMIO16 (XhciFwStarting + FW_SIZE_OFFSET); - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG04 + 2, AccWidthUint16, 0x0000, FwSize); - - // - // Set the starting address offset for Instruction RAM preload. - // - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG08, AccWidthUint16, 0x0000, 0); - - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccWidthUint32, ~BIT29, BIT29); - - for (;;) { - ReadMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00 , AccWidthUint32, &RegData); - if (RegData & BIT30) break; - } - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccWidthUint32, ~BIT29, 0); - -// -// Step 4. to release resets in XHCI_ACPI_MMIO_AMD_REG00. wait for USPLL to lock by polling USPLL lock. -// - - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccWidthUint32, ~U3PLL_RESET, 0); //Release U3PLLreset - for (;;) { - ReadMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00 , AccWidthUint32, &RegData); - if (RegData & U3PLL_LOCK) break; - } - - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccWidthUint32, ~U3PHY_RESET, 0); //Release U3PHY - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccWidthUint32, ~U3CORE_RESET, 0); //Release core reset - -// RPR 8.8 SuperSpeed PHY Configuration, it is only for A11. - if (IsSbA11 ()) { - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG90, AccWidthUint32, 0xFFF00000, 0x000AAAAA); // - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGD0, AccWidthUint32, 0xFFF00000, 0x000AAAAA); // - } - - XhciInitIndirectReg (); - - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEF, AccWidthUint8, ~(BIT4 + BIT5), 0); // Disable Device 22 - RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEF, AccWidthUint8, ~(BIT7), BIT7); // Enable 2.0 devices - //if (!(pConfig->S4Resume)) { - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccWidthUint32, ~(BIT21), BIT21); //SMI - //} -// -// Step 5. -// - RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccWidthUint32, ~(BIT17 + BIT18 + BIT19), BIT17 + BIT18); -} -#endif diff --git a/src/vendorcode/amd/cimx/sb900/SbPort.c b/src/vendorcode/amd/cimx/sb900/SbPort.c new file mode 100644 index 0000000..90e878e --- /dev/null +++ b/src/vendorcode/amd/cimx/sb900/SbPort.c @@ -0,0 +1,737 @@ + +/** + * @file + * + * Southbridge Init during POWER-ON + * + * Prepare Southbridge environment during power on stage. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: CIMx-SB + * @e sub-project: + * @e $Revision:$ @e $Date:$ + * + */ +/*;******************************************************************************** +; +; Copyright (c) 2011, Advanced Micro Devices, Inc. +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; * Redistributions of source code must retain the above copyright +; notice, this list of conditions and the following disclaimer. +; * Redistributions in binary form must reproduce the above copyright +; notice, this list of conditions and the following disclaimer in the +; documentation and/or other materials provided with the distribution. +; * Neither the name of Advanced Micro Devices, Inc. nor the names of +; its contributors may be used to endorse or promote products derived +; from this software without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY +; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;*********************************************************************************/ + +#include "SbPlatform.h" +#include "cbtypes.h" +#include "AmdSbLib.h" +#include "Hudson-2.h" + +/** + * sbPorInitPciTable - PCI device registers initial during the power on stage. + * + * + * + * + */ +REG8MASK sbPorInitPciTable[] = +{ + // SATA device + {0x00, SATA_BUS_DEV_FUN, 0}, + {SB_SATA_REG84 + 3, ~BIT2, 0}, + {SB_SATA_REGA0, ~(BIT2 + BIT3 + BIT4 + BIT5 + BIT6), BIT2 + BIT3 + BIT4 + BIT5}, + {0xFF, 0xFF, 0xFF}, + // LPC Device (Bus 0, Dev 20, Func 3) + {0x00, LPC_BUS_DEV_FUN, 0}, + {SB_LPC_REG44, 0xFF, BIT6 + BIT7}, //Enable COM1 and COM2 + {SB_LPC_REG47, 0xFF, BIT5}, + {SB_LPC_REG48, 0x00, BIT0 + BIT1 + BIT2}, + {SB_LPC_REG7C, 0x00, BIT0 + BIT2}, + {SB_LPC_REG78, 0xF0, BIT2 + BIT3}, // Enable LDRQ pin + {SB_LPC_REGBB, 0xFF, BIT3 + BIT4 + BIT5}, + // A12 set 0xBB [5:3] = 111 to improve SPI timing margin. + // A12 Set 0xBA [6:5] = 11 improve SPI timing margin. (SPI Prefetch enhancement) + {SB_LPC_REGBB, 0xBE, BIT0 + BIT3 + BIT4 + BIT5}, + {SB_LPC_REGBA, 0x9F, BIT5 + BIT6}, + {SB_LPC_REGA4, ~ BIT0, BIT0}, //[BUG Fix] Force EC_PortActive to 1 to fix possible IR non function issue when NO_EC_SUPPORT is defined + {0xFF, 0xFF, 0xFF}, + // P2P Bridge (Bus 0, Dev 20, Func 4) + {0x00, PCIB_BUS_DEV_FUN, 0}, + {SB_PCIB_REG4B, 0xFF, BIT6 + BIT7 + BIT4}, + // ENH230012: Disable P2P bridge decoder for IO address 0x1000-0x1FFF in SBPOR + // ENH260809: Add PCI port 80 support in Hudson-2/3 +#ifdef SB_PCIB_PORT_80_SUPPORT + {SB_PCIB_REG1C, 0x00, 0xF0}, + {SB_PCIB_REG1D, 0x00, 0x00}, + {SB_PCIB_REG04, 0x00, 0x21}, +#endif + {SB_PCIB_REG40, 0xDF, 0x20}, + {SB_PCIB_REG50, 0x02, 0x01}, + {0xFF, 0xFF, 0xFF}, +}; + +/** + * sbPmioPorInitTable - Southbridge ACPI MMIO initial during the power on stage. + * + * + * + * + */ +AcpiRegWrite sbPmioPorInitTable[] = +{ + {00, 00, 0xB0, 0xAC}, // Signature + {MISC_BASE >> 8, SB_MISC_REG41, 0x1F, 0x40}, //keep Auxiliary_14Mclk_Sel [12] + //RPR 8.9 USB 3.0 Reference Clock MISC_REG 0x40 [4] = 0 Enable spread-spectrum reference clock. + {MISC_BASE >> 8, SB_MISC_REG40, 0xEF, 0x00}, +// {MISC_BASE >> 8, 0x24 + 2, 0xFF, 0x20}, Testing CPU clk strength + {PMIO_BASE >> 8, SB_PMIOA_REG5D, 0x00, BIT0}, + {PMIO_BASE >> 8, SB_PMIOA_REGD2, 0xCF, BIT4 + BIT5}, + {SMBUS_BASE >> 8, SB_SMBUS_REG12, 0x00, BIT0}, + {PMIO_BASE >> 8, SB_PMIOA_REG28, 0xFF, BIT0 + BIT2}, + {PMIO_BASE >> 8, SB_PMIOA_REG44 + 3, 0x67, BIT7 + BIT3}, // 2.5 Enable Boot Timer + {PMIO_BASE >> 8, SB_PMIOA_REG48, 0xFF, BIT0}, + {PMIO_BASE >> 8, SB_PMIOA_REG00, 0xFF, 0x0E}, + {PMIO_BASE >> 8, SB_PMIOA_REG00 + 2, 0xFF, 0x40}, + {PMIO_BASE >> 8, SB_PMIOA_REG00 + 3, 0xFF, 0x08}, + {PMIO_BASE >> 8, SB_PMIOA_REG34, 0xEF, BIT0 + BIT1}, + {PMIO_BASE >> 8, SB_PMIOA_REGEC, 0xFD, BIT1}, + //{PMIO_BASE >> 8, SB_PMIOA_REG5B, 0xF9, BIT1 + BIT2}, + {PMIO_BASE >> 8, SB_PMIOA_REG08, 0xFE, BIT2 + BIT4}, + {PMIO_BASE >> 8, SB_PMIOA_REG08 + 1, 0xFF, BIT0}, + {PMIO_BASE >> 8, SB_PMIOA_REG54, 0x00, BIT4 + BIT6 + BIT7}, + {PMIO_BASE >> 8, SB_PMIOA_REG04 + 3, 0xFD, BIT1}, + {PMIO_BASE >> 8, SB_PMIOA_REG74, 0xF6, BIT0 + BIT3}, + {PMIO_BASE >> 8, SB_PMIOA_REGF0, ~BIT2, 0x00}, + // RPR GEC I/O Termination Setting + // PM_Reg 0xF6 = Power-on default setting + // PM_Reg 0xF7 = Power-on default setting + // PM_Reg 0xF8 = 0x6C + // PM_Reg 0xF9 = 0x21 + // PM_Reg 0xFA = 0x00 Hudson-2 A12 GEC I/O Pad settings for 3.3V CMOS + {PMIO_BASE >> 8, SB_PMIOA_REGF8, 0x00, 0x6C}, + {PMIO_BASE >> 8, SB_PMIOA_REGF8 + 1, 0x00, 0x07}, + {PMIO_BASE >> 8, SB_PMIOA_REGF8 + 2, 0x00, 0x00}, + // PRP GEC -end + {PMIO_BASE >> 8, SB_PMIOA_REGC4, 0xee, 0x04}, // Release NB_PCIE_RST + {PMIO_BASE >> 8, SB_PMIOA_REGC0 + 2, 0xBF, 0x40}, + + {PMIO_BASE >> 8, SB_PMIOA_REGBE, 0xDF, BIT5}, + + //OBS200280 + //{PMIO_BASE >> 8, SB_PMIOA_REGBE, 0xFF, BIT1}, + + + {0xFF, 0xFF, 0xFF, 0xFF}, +}; + +/** + * sbPowerOnInit - Config Southbridge during power on stage. + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +VOID +sbPowerOnInit ( + IN AMDSBCFG* pConfig + ) +{ + UINT8 dbPortStatus; + //UINT8 dbSysConfig; + UINT32 abValue; + UINT32 abValue2; + UINT8 dbValue; + UINT8 dbEfuse; + UINT32 dbSpiMode; + UINT16 dwAsfPort; + UINT16 smbusBase; + UINT8 cimSataMode; +// UINT8 cimSpiFastReadEnable; +// UINT8 cimSpiFastReadSpeed; + UINT8 cimSataInternal100Spread; + UINT8 indexValue; + UINT32 ddValue; + UINT8 SataPortNum; + UINT8 XhciEfuse; + XhciEfuse = XHCI_EFUSE_LOCATION; + + cimSataMode = pConfig->SATAMODE.SataModeReg; +// if (pConfig->BuildParameters.SpiFastReadEnable != NULL ) { +// cimSpiFastReadEnable = (UINT8) pConfig->BuildParameters.SpiFastReadEnable; +// } else { +// cimSpiFastReadEnable = cimSpiFastReadEnableDefault; +// } +// cimSpiFastReadSpeed = (UINT8) pConfig->BuildParameters.SpiFastReadSpeed; + cimSataInternal100Spread = ( UINT8 ) pConfig->SataInternal100Spread; + +#if SB_CIMx_PARAMETER == 0 + cimSataMode = (UINT8) ((cimSataMode & 0xFB) | cimSataSetMaxGen2Default); + cimSataMode = (UINT8) ((cimSataMode & 0x0F) | cimSataClkModeDefault); + cimSpiFastReadEnable = cimSpiFastReadEnableDefault; + cimSpiFastReadSpeed = cimSpiFastReadSpeedDefault; + cimSataInternal100Spread = SataInternal100SpreadDefault; +#endif + + TRACE ((DMSG_SB_TRACE, "CIMx - Entering sbPowerOnInit \n")); + +// Hudson-2 Only Enabled (Mmio_mem_enablr) // Default value is correct + RWPMIO (SB_PMIOA_REG24, AccWidthUint8, 0xFF, BIT0); + + RWPMIO (0xD3, AccWidthUint8, ~BIT4, 0); + RWPMIO (0xD3, AccWidthUint8, ~BIT4, BIT4); + + if ( pConfig->Cg2Pll == 1 ) { + TurnOffCG2 (); + pConfig->SATAMODE.SataMode.SataClkMode = 0x0a; + } + + //enable CF9 + RWPMIO (0xD2, AccWidthUint8, ~BIT6, 0); + +// Set A-Link bridge access address. This address is set at device 14h, function 0, +// register 0f0h. This is an I/O address. The I/O address must be on 16-byte boundary. + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGE0, AccWidthUint32, 00, ALINK_ACCESS_INDEX); + writeAlink (0x80000004, 0x04); // RPR 4.2 Enable Hudson-2 to issue memory read/write requests in the upstream direction + abValue = readAlink (SB_ABCFG_REG9C | (UINT32) (ABCFG << 29)); // RPR 4.5 Disable the credit variable in the downstream arbitration equation + abValue = abValue | BIT0; + writeAlink (SB_ABCFG_REG9C | (UINT32) (ABCFG << 29), abValue); + writeAlink (0x30, 0x10); // AXINDC 0x10[9]=1, Enabling Non-Posted memory write for K8 platform. + writeAlink (0x34, readAlink (0x34) | BIT9); + rwAlink (SB_ABCFG_REG10050 | (UINT32) (ABCFG << 29), ~BIT2, 0x00); + + // Enable external Stickybit register reset feature + //writeAlink (SB_AX_INDXC_REG30 | (UINT32) (AXINDC << 29), 0x30); + //abValue = readAlink (SB_AX_DATAC_REG34 | (UINT32) (AXINDC << 29)); + //abValue |= BIT6 + BIT5; + //writeAlink (SB_AX_DATAC_REG34 | (UINT32) (AXINDC << 29), abValue); + + // Configure UMI target link speed + dbEfuse = PCIE_FORCE_GEN1_EFUSE_LOCATION; + getEfuseStatus (&dbEfuse); + if ( dbEfuse & BIT0 ) { + pConfig->NbSbGen2 = 0; + } + + dbEfuse = FCH_Variant_EFUSE_LOCATION; + getEfuseStatus (&dbEfuse); + if ((dbEfuse == 0x07) || (dbEfuse == 0x08)) { + pConfig->NbSbGen2 = 0; + } + + if (pConfig->NbSbGen2) { + abValue = 2; + abValue2 = BIT0; + } else { + abValue = 1; + abValue2 = 0; + } + rwAlink (SB_AX_INDXP_REGA4, 0xFFFFFFFE, abValue2); + rwAlink ((UINT32)SB_AX_CFG_REG88, 0xFFFFFFF0, abValue); + + if (pConfig->sdbEnable) { + rwAlink (SB_ABCFG_REGC0 | (UINT32) (ABCFG << 29), ~BIT12, 0x00); + RWMEM (ACPI_MMIO_BASE + SERIAL_DEBUG_BASE + 0, AccWidthUint8, 0, pConfig->Debug_Reg00); + RWMEM (ACPI_MMIO_BASE + SERIAL_DEBUG_BASE + 2, AccWidthUint8, 0, pConfig->Debug_Reg02); + RWMEM (ACPI_MMIO_BASE + SERIAL_DEBUG_BASE + 4, AccWidthUint8, 0, pConfig->Debug_Reg04); + RWMEM (ACPI_MMIO_BASE + SERIAL_DEBUG_BASE + 1, AccWidthUint8, 0, pConfig->Debug_Reg01); + RWMEM (ACPI_MMIO_BASE + SERIAL_DEBUG_BASE + 3, AccWidthUint8, 0, pConfig->Debug_Reg03); + RWMEM (ACPI_MMIO_BASE + SERIAL_DEBUG_BASE + 5, AccWidthUint8, 0, pConfig->Debug_Reg05); + } + +// Set Build option into SB + WritePCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG64, AccWidthUint16 | S3_SAVE, &(pConfig->BuildParameters.SioPmeBaseAddress)); + RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA0, AccWidthUint32 | S3_SAVE, 0x001F, (pConfig->BuildParameters.SpiRomBaseAddress)); + RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG9C, AccWidthUint32 | S3_SAVE, 0, (pConfig->BuildParameters.GecShadowRomBase + 1)); +// Enabled SMBUS0/SMBUS1 (ASF) Base Address + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG2C, AccWidthUint16, 06, (pConfig->BuildParameters.Smbus0BaseAddress) + BIT0); //protect BIT[2:1] + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG28, AccWidthUint16, 06, (pConfig->BuildParameters.Smbus1BaseAddress) + BIT0); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG60, AccWidthUint16, 00, (pConfig->BuildParameters.AcpiPm1EvtBlkAddr)); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG62, AccWidthUint16, 00, (pConfig->BuildParameters.AcpiPm1CntBlkAddr)); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG64, AccWidthUint16, 00, (pConfig->BuildParameters.AcpiPmTmrBlkAddr)); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG66, AccWidthUint16, 00, (pConfig->BuildParameters.CpuControlBlkAddr)); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG68, AccWidthUint16, 00, (pConfig->BuildParameters.AcpiGpe0BlkAddr)); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG6A, AccWidthUint16, 00, (pConfig->BuildParameters.SmiCmdPortAddr)); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG6C, AccWidthUint16, 00, (pConfig->BuildParameters.AcpiPmaCntBlkAddr)); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG6E, AccWidthUint16, 00, (pConfig->BuildParameters.SmiCmdPortAddr) + 8); + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG48, AccWidthUint32, 00, (pConfig->BuildParameters.WatchDogTimerBase)); + + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG2E, AccWidthUint8, ~(BIT1 + BIT2), 0); //clear BIT[2:1] + smbusBase = (UINT16) (pConfig->BuildParameters.Smbus0BaseAddress); + dbValue = 0x00; + WriteIO (smbusBase + 0x14, AccWidthUint8, &dbValue); + + dbEfuse = SATA_FIS_BASE_EFUSE_LOC; + getEfuseStatus (&dbEfuse); + + programSbAcpiMmioTbl ((AcpiRegWrite*) FIXUP_PTR (&sbPmioPorInitTable[0])); + + //RPR 3.4 Enabling ClkRun Function + RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGBB, AccWidthUint8, ~ BIT2, BIT2); + //BUG265683: Mismatch clkrun enable register setting between RPR and CIMX code + RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGD0, AccWidthUint8, ~ BIT2, 0); + + SataPortNum = 0; + for ( SataPortNum = 0; SataPortNum < 0x06; SataPortNum++ ) { + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8, 0xFF, 1 << SataPortNum); + SbStall (2); + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8, (0xFF ^ (1 << SataPortNum)) , 0x00); + SbStall (2); + } + + dbValue = 0x0A; + WriteIO (SB_IOMAP_REG70, AccWidthUint8, &dbValue); + ReadIO (SB_IOMAP_REG71, AccWidthUint8, &dbValue); + dbValue &= 0xEF; + WriteIO (SB_IOMAP_REG71, AccWidthUint8, &dbValue); + + RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG00, AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, (BIT19 + BIT24 + BIT25 + BIT26)); + RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG0C, AccWidthUint32 | S3_SAVE, 0xFFC0FFFF, 0 ); + if (pConfig->BuildParameters.SpiSpeed) { + RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG0C, AccWidthUint32 | S3_SAVE, ~(BIT13 + BIT12), ((pConfig->BuildParameters.SpiSpeed - 1 ) << 12)); + } + if (pConfig->BuildParameters.SpiFastSpeed) { + RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG0C, AccWidthUint32 | S3_SAVE, ~(BIT15 + BIT14), ((pConfig->BuildParameters.SpiFastSpeed - 1 ) << 14)); + } + //if (pConfig->BuildParameters.SpiBurstWrite) { + RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG1C, AccWidthUint32 | S3_SAVE, ~(BIT10), ((pConfig->BuildParameters.SpiBurstWrite) << 10)); + //} + dbSpiMode = pConfig->BuildParameters.SpiMode; + if (pConfig->BuildParameters.SpiMode) { + if ((dbSpiMode == SB_SPI_MODE_QUAL_114) || (dbSpiMode == SB_SPI_MODE_QUAL_112) || (dbSpiMode == SB_SPI_MODE_QUAL_144) || (dbSpiMode == SB_SPI_MODE_QUAL_122)) { + // RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG00, AccWidthUint32 | S3_SAVE, 0xFFFF0000, 0x013e); + // RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG0C, AccWidthUint32 | S3_SAVE, 0xFFFFFF00, 0x80 ); + // RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG00, AccWidthUint32 | S3_SAVE, 0xFFFEFFFF, 0x10000); + // SbStall (1000); + } + RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG00, AccWidthUint32 | S3_SAVE, ~( BIT18 + BIT29 + BIT30), ((pConfig->BuildParameters.SpiMode & 1) << 18) + ((pConfig->BuildParameters.SpiMode & 6) << 28)); + } + +// if ( cimSpiFastReadSpeed ) { +// RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG0C, AccWidthUint16 | S3_SAVE, ~(BIT15 + BIT14), ( cimSpiFastReadSpeed << 14)); +// } + //Program power on pci init table + programPciByteTable ( (REG8MASK*) FIXUP_PTR (&sbPorInitPciTable[0]), sizeof (sbPorInitPciTable) / sizeof (REG8MASK) ); + + programSbAcpiMmioTbl ((AcpiRegWrite *) (pConfig->OEMPROGTBL.OemProgrammingTablePtr_Ptr)); + + RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG6C, AccWidthUint32 | S3_SAVE, 0xFFFFFF00, 0); + + if (pConfig->SATAMODE.SataModeReg == 0) { + pConfig->SATAMODE.SataModeReg = (pConfig->SATAMODE.SataMode.SataController << 0) \ + + (pConfig->SATAMODE.SataMode.SataIdeCombMdPriSecOpt << 1) \ + + (pConfig->SATAMODE.SataMode.SataSetMaxGen2 << 2) \ + + (pConfig->SATAMODE.SataMode.SataIdeCombinedMode << 3) \ + + (pConfig->SATAMODE.SataMode.SataClkMode << 4); + } + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGDA, AccWidthUint8, 0x00, pConfig->SATAMODE.SataModeReg); + + if (dbEfuse & BIT0) { + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGDA, AccWidthUint8, 0xFB, 0x04); + } + + ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGDA, AccWidthUint8, &dbPortStatus); + if ( ((dbPortStatus & 0xF0) == 0x10) ) { + RWMEM (ACPI_MMIO_BASE + MISC_BASE + SB_PMIOA_REG08, AccWidthUint8, 0, BIT5); + } + + if ( pConfig->BuildParameters.LegacyFree ) { + RWPCI (((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG44), AccWidthUint32 | S3_SAVE, 00, 0x0003C000); + } else { + RWPCI (((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG44), AccWidthUint32 | S3_SAVE, 00, 0xFF03FFD5); + } + + if ( cimSataInternal100Spread ) { + RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x1E, AccWidthUint8, 0xFF, BIT4); + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG84), AccWidthUint32, 0xFFFFFFFB, 0x00); + } else { + RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x1E, AccWidthUint8, ~BIT4, 0x00); + } + // Toggle GEVENT4 to reset all GPP devices + sbGppTogglePcieReset (pConfig); + + if ( cimSataInternal100Spread ) { + RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG84), AccWidthUint32, 0xFFFFFFFF, 0x04); + } + + dbValue = 0x08; + WriteIO (SB_IOMAP_REGC00, AccWidthUint8, &dbValue); + ReadIO (SB_IOMAP_REGC01, AccWidthUint8, &dbValue); + if ( !pConfig->BuildParameters.EcKbd ) { + // Route SIO IRQ1/IRQ12 to USB IRQ1/IRQ12 input + dbValue = dbValue | 0x0A; + } + WriteIO (SB_IOMAP_REGC01, AccWidthUint8, &dbValue); + + dbValue = 0x09; + WriteIO (SB_IOMAP_REGC00, AccWidthUint8, &dbValue); + ReadIO (SB_IOMAP_REGC01, AccWidthUint8, &dbValue); + if ( !pConfig->BuildParameters.EcKbd ) { + // Route SIO IRQ1/IRQ12 to USB IRQ1/IRQ12 input + dbValue = dbValue & 0xF9; + } + if ( pConfig->BuildParameters.LegacyFree ) { + // Disable IRQ1/IRQ12 filter enable for Legacy free with USB KBC emulation. + dbValue = dbValue & 0x9F; + } + // Enabled IRQ input + dbValue = dbValue | BIT4; + WriteIO (SB_IOMAP_REGC01, AccWidthUint8, &dbValue); + + dwAsfPort = ((UINT16) pConfig->BuildParameters.Smbus1BaseAddress & 0xFFF0); + if ( dwAsfPort != 0 ) { + RWIO (dwAsfPort + 0x0E, AccWidthUint8, 0x0, 0x70); // 0x70 will change to EQU ( Remote control address) + } + +#ifndef NO_EC_SUPPORT + getChipSysMode (&dbPortStatus); + if ( ((dbPortStatus & ChipSysEcEnable) == 0x00) ) { + // EC is disabled by jumper setting or board config + RWPCI (((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4), AccWidthUint16 | S3_SAVE, 0xFFFE, BIT0); + } else { + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC4, AccWidthUint8, 0xF7, 0x08); + ecPowerOnInit ( pConfig); + imcSleep ( pConfig); + } +#endif + + + ReadPCI ((USB_XHCI_BUS_DEV_FUN << 16) + 0x00, AccWidthUint32, &ddValue); + ReadPCI ((USB_XHCI_BUS_DEV_FUN << 16) + 0x00, AccWidthUint32, &ddValue); + if ( ddValue == 0x78121022 ) { +// +// First Xhci controller. +// + ReadPCI ((USB_XHCI_BUS_DEV_FUN << 16) + 0x00, AccWidthUint32, &ddValue); + ddValue = 0; + indexValue = XHCI_REGISTER_BAR03; + WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); + ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); + ddValue = (UINT32) dbValue; + + indexValue = XHCI_REGISTER_BAR02; + WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); + ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); + ddValue <<= 8; + ddValue |= (UINT32) dbValue; + + indexValue = XHCI_REGISTER_BAR01; + WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); + ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); + ddValue <<= 8; + ddValue |= (UINT32) dbValue; + + indexValue = XHCI_REGISTER_BAR00; + WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); + ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); + ddValue <<= 8; + ddValue |= (UINT32) dbValue; + WritePCI ((USB_XHCI_BUS_DEV_FUN << 16) + 0x10, AccWidthUint32, &ddValue); + + indexValue = XHCI_REGISTER_04H; + WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); + ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); + WritePCI ((USB_XHCI_BUS_DEV_FUN << 16) + 0x04, AccWidthUint8, &dbValue); + + indexValue = XHCI_REGISTER_0CH; + WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); + ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); + WritePCI ((USB_XHCI_BUS_DEV_FUN << 16) + 0x0C, AccWidthUint8, &dbValue); + + indexValue = XHCI_REGISTER_3CH; + WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); + ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); + WritePCI ((USB_XHCI_BUS_DEV_FUN << 16) + 0x3C, AccWidthUint8, &dbValue); +// +// Second Xhci controller. +// + ReadPCI ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x00, AccWidthUint32, &ddValue); + ddValue = 0; + indexValue = XHCI1_REGISTER_BAR03; + WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); + ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); + ddValue = (UINT32) dbValue; + + indexValue = XHCI1_REGISTER_BAR02; + WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); + ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); + ddValue <<= 8; + ddValue |= (UINT32) dbValue; + + indexValue = XHCI1_REGISTER_BAR01; + WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); + ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); + ddValue <<= 8; + ddValue |= (UINT32) dbValue; + + indexValue = XHCI1_REGISTER_BAR00; + WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); + ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); + ddValue <<= 8; + ddValue |= (UINT32) dbValue; + WritePCI ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x10, AccWidthUint32, &ddValue); + + indexValue = XHCI1_REGISTER_04H; + WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); + ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); + WritePCI ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x04, AccWidthUint8, &dbValue); + + indexValue = XHCI1_REGISTER_0CH; + WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); + ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); + WritePCI ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x0C, AccWidthUint8, &dbValue); + + indexValue = XHCI1_REGISTER_3CH; + WriteIO (SB_IOMAP_REGCD4, AccWidthUint8, &indexValue); + ReadIO (SB_IOMAP_REGCD5, AccWidthUint8, &dbValue); + WritePCI ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x3C, AccWidthUint8, &dbValue); + } + // RPR 3.2 Enabling SPI ROM Prefetch + // Set LPC cfg 0xBA bit 8 + RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGBA, AccWidthUint16 | S3_SAVE, 0xFFFF, BIT8); + if (IsSbA12Plus ()) { + // Enable SPI Prefetch for USB, set LPC cfg 0xBA bit 7 to 1 for A12 and above + RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGBA, AccWidthUint16 | S3_SAVE, 0xFFFF, BIT7); + } +#ifdef XHCI_SUPPORT +#ifdef XHCI_INIT_IN_ROM_SUPPORT + if ( pConfig->XhciSwitch == 1 ) { + if ( pConfig->S3Resume == 0 ) { + XhciEarlyInit (); + } else { + XhciInitIndirectReg (); + } + } else { + // for power saving. + + // add Efuse checking for Xhci enable/disable + getEfuseStatus (&XhciEfuse); + if ((XhciEfuse & (BIT0 + BIT1)) != (BIT0 + BIT1)) { + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccWidthUint32, 0xF0FFFBFF, 0x0); + } + } +#endif +#endif +} + +#ifdef XHCI_SUPPORT +VOID +XhciInitIndirectReg ( + ) +{ + UINT32 ddDrivingStrength; + UINT32 port; + ddDrivingStrength = 0; + port = 0; +#ifdef SB_USB_BATTERY_CHARGE_SUPPORT + RWXhciIndReg ( 0x40000018, 0xFFFFFFFF, 0x00000030); +#endif +// +// RPR SuperSpeed PHY Configuration (adaptation mode setting) +// + RWXhciIndReg ( SB_XHCI_IND_REG94, 0xFFFFFC00, 0x00000021); + RWXhciIndReg ( SB_XHCI_IND_REGD4, 0xFFFFFC00, 0x00000021); +// +// RPR SuperSpeed PHY Configuration (CR phase and frequency filter settings) +// + RWXhciIndReg ( SB_XHCI_IND_REG98, 0xFFFFFFC0, 0x0000000A); + RWXhciIndReg ( SB_XHCI_IND_REGD8, 0xFFFFFFC0, 0x0000000A); + +// +// RPR BLM Meaasge +// + RWXhciIndReg ( SB_XHCI_IND_REG00, 0xF8FFFFFF, 0x07000000); +// +// RPR 8.13 xHCI USB 2.0 PHY Settings +// Step 1 is done by hardware default +// Step 2 +#ifdef USB3_EHCI_DRIVING_STRENGTH + for (port = 0; port < 4; port ++) { + ddDrivingStrength = (USB3_EHCI_DRIVING_STRENGTH >> (port * 4)) & 0xF; + if (ddDrivingStrength & BIT3) { + ddDrivingStrength &= 0x07; + if (port < 2) { + RWXhci0IndReg ( SB_XHCI_IND60_REG00, 0xFFFE0FF8, (port << 13) + ddDrivingStrength); + RWXhci0IndReg ( SB_XHCI_IND60_REG00, 0xFFFFEFFF, 0x00001000); + } else { + RWXhci1IndReg ( SB_XHCI_IND60_REG00, 0xFFFE0FF8, (port << 13) + ddDrivingStrength); + RWXhci1IndReg ( SB_XHCI_IND60_REG00, 0xFFFFEFFF, 0x00001000); + } + } + } +#endif + +// Step 3 + if (IsSbA11 ()) { + RWXhciIndReg ( SB_XHCI_IND60_REG0C, ~ ((UINT32) (0x0f << 8)), ((UINT32) (0x00 << 8))); + RWXhciIndReg ( SB_XHCI_IND60_REG08, ~ ((UINT32) (0xff << 8)), ((UINT32) (0x15 << 8))); + } else { + RWXhciIndReg ( SB_XHCI_IND60_REG0C, ~ ((UINT32) (0x0f << 8)), ((UINT32) (0x02 << 8))); + RWXhciIndReg ( SB_XHCI_IND60_REG08, ~ ((UINT32) (0xff << 8)), ((UINT32) (0x0f << 8))); + } +} + +VOID +XhciEarlyInit ( + ) +{ + UINT16 BcdAddress; + UINT16 BcdSize; + UINT16 AcdAddress; + UINT16 AcdSize; + UINT16 FwAddress; + UINT16 FwSize; + UINTN XhciFwStarting; + UINT32 SpiValidBase; + UINT32 RegData; + UINT16 i; + + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccWidthUint32, 0x00000000, 0x00400700); + SbStall (20); +// +// Get ROM SIG starting address for USB firmware starting address (offset 0x0C to SIG address) +// + GetRomSigPtr (&XhciFwStarting); + + if (XhciFwStarting == 0) { + return; + } + + XhciFwStarting = ACPIMMIO32 (XhciFwStarting + FW_TO_SIGADDR_OFFSET); + if (IsLpcRom ()) { + //XHCI firmware re-load + RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGCC, AccWidthUint32 | S3_SAVE, ~BIT2, (BIT2 + BIT1 + BIT0)); + RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGCC, AccWidthUint32 | S3_SAVE, 0x00000FFF, (UINT32) (XhciFwStarting)); + } +// +// RPR Enable SuperSpeed receive special error case logic. 0x20 bit8 +// RPR Enable USB2.0 RX_Valid Synchronization. 0x20 bit9 +// Enable USB2.0 DIN/SE0 Synchronization. 0x20 bit10 +// + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG20, AccWidthUint32, 0xFFFFF8FF, 0x00000700); +// +// RPR SuperSpeed PHY Configuration (adaptation timer setting) +// + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG90, AccWidthUint32, 0xFFF00000, 0x000AAAAA); + //RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG90 + 0x40, AccWidthUint32, 0xFFF00000, 0x000AAAAA); + +// +// Step 1. to enable Xhci IO and Firmware load mode +// + +#ifdef XHCI_SUPPORT_ONE_CONTROLLER + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccWidthUint32, 0xF0FFFFFC, 0x00000001); +#else + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccWidthUint32, 0xF0FFFFFC, 0x00000003); +#endif + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccWidthUint32, 0xEFFFFFFF, 0x10000000); + +// +// Step 2. to read a portion of the USB3_APPLICATION_CODE from BIOS ROM area and program certain registers. +// + + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGA0, AccWidthUint32, 0x00000000, (SPI_HEAD_LENGTH << 16)); + + BcdAddress = ACPIMMIO16 (XhciFwStarting + BCD_ADDR_OFFSET); + BcdSize = ACPIMMIO16 (XhciFwStarting + BCD_SIZE_OFFSET); + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGA4, AccWidthUint16, 0x0000, BcdAddress); + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGA4 + 2, AccWidthUint16, 0x0000, BcdSize); + + AcdAddress = ACPIMMIO16 (XhciFwStarting + ACD_ADDR_OFFSET); + AcdSize = ACPIMMIO16 (XhciFwStarting + ACD_SIZE_OFFSET); + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGA8, AccWidthUint16, 0x0000, AcdAddress); + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGA8 + 2, AccWidthUint16, 0x0000, AcdSize); + + SpiValidBase = SPI_BASE2 (XhciFwStarting + 4) | SPI_BAR0_VLD | SPI_BASE0 | SPI_BAR1_VLD | SPI_BASE1 | SPI_BAR2_VLD; + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGB0, AccWidthUint32, 0x00000000, SpiValidBase); + + // + // Copy Type0/1/2 data block from ROM image to MMIO starting from 0xC0 + // + for (i = 0; i < SPI_HEAD_LENGTH; i++) { + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGC0 + i, AccWidthUint8, 0, ACPIMMIO8 (XhciFwStarting + i)); + } + + for (i = 0; i < BcdSize; i++) { + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGC0 + SPI_HEAD_LENGTH + i, AccWidthUint8, 0, ACPIMMIO8 (XhciFwStarting + BcdAddress + i)); + } + + for (i = 0; i < AcdSize; i++) { + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGC0 + SPI_HEAD_LENGTH + BcdSize + i, AccWidthUint8, 0, ACPIMMIO8 (XhciFwStarting + AcdAddress + i)); + } + +// +// Step 3. to enable the instruction RAM preload functionality. +// + FwAddress = ACPIMMIO16 (XhciFwStarting + FW_ADDR_OFFSET); + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGB4, AccWidthUint16, 0x0000, ACPIMMIO16 (XhciFwStarting + FwAddress)); + FwAddress += 2; + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG04, AccWidthUint16, 0x0000, FwAddress); + + FwSize = ACPIMMIO16 (XhciFwStarting + FW_SIZE_OFFSET); + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG04 + 2, AccWidthUint16, 0x0000, FwSize); + + // + // Set the starting address offset for Instruction RAM preload. + // + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG08, AccWidthUint16, 0x0000, 0); + + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccWidthUint32, ~BIT29, BIT29); + + for (;;) { + ReadMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00 , AccWidthUint32, &RegData); + if (RegData & BIT30) break; + } + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccWidthUint32, ~BIT29, 0); + +// +// Step 4. to release resets in XHCI_ACPI_MMIO_AMD_REG00. wait for USPLL to lock by polling USPLL lock. +// + + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccWidthUint32, ~U3PLL_RESET, 0); //Release U3PLLreset + for (;;) { + ReadMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00 , AccWidthUint32, &RegData); + if (RegData & U3PLL_LOCK) break; + } + + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccWidthUint32, ~U3PHY_RESET, 0); //Release U3PHY + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccWidthUint32, ~U3CORE_RESET, 0); //Release core reset + +// RPR 8.8 SuperSpeed PHY Configuration, it is only for A11. + if (IsSbA11 ()) { + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG90, AccWidthUint32, 0xFFF00000, 0x000AAAAA); // + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGD0, AccWidthUint32, 0xFFF00000, 0x000AAAAA); // + } + + XhciInitIndirectReg (); + + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEF, AccWidthUint8, ~(BIT4 + BIT5), 0); // Disable Device 22 + RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEF, AccWidthUint8, ~(BIT7), BIT7); // Enable 2.0 devices + //if (!(pConfig->S4Resume)) { + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccWidthUint32, ~(BIT21), BIT21); //SMI + //} +// +// Step 5. +// + RWMEM (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccWidthUint32, ~(BIT17 + BIT18 + BIT19), BIT17 + BIT18); +} +#endif