[coreboot-gerrit] Patch set updated for coreboot: mainboard/apollolake_rvp: Configure GPIOs earlier, in .init

[Alexandru Gagniuc]

Alexandru Gagniuc ([e-mail]) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/13380

-gerrit

commit 8f5baf80dbd5dc9169ef162423d07cfa1bdf2370
Author: Alexandru Gagniuc 
Date:   Wed Dec 9 16:54:41 2015 -0800

mainboard/apollolake_rvp: Configure GPIOs earlier, in .init

The .init function gets called very early on, as opposed to
    .enable_dev, which will get called after resource allocation. Moving
    GPIO configuration to mainboard .init gives it precedence over the
    SOC .init, and therefore is called before fsp_silicon_init().

Change-Id: I7cc62d11f8c49c9eb77f75a307fe47374744e3eb
    Signed-off-by: Alexandru Gagniuc 
---
 src/mainboard/intel/apollolake_rvp/mainboard.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/mainboard/intel/apollolake_rvp/mainboard.c b/src/mainboard/intel/apollolake_rvp/mainboard.c
index e82f4a5..b437f74 100644
--- a/src/mainboard/intel/apollolake_rvp/mainboard.c
+++ b/src/mainboard/intel/apollolake_rvp/mainboard.c
@@ -22,11 +22,11 @@ static const struct pad_config aplk_rvp_gpios[] = {
    PAD_CFG_NF(GPIO_195, NATIVE, DEEP, NF1),	/* PANEL0_BKLTCTL */
 };

-static void mainboard_enable(struct device *dev)
+static void mainboard_init(void *chip_info)
 {
    gpio_configure_pads(aplk_rvp_gpios, ARRAY_SIZE(aplk_rvp_gpios));
 }

struct chip_operations mainboard_ops = {
-	.enable_dev = mainboard_enable,
+	.init = mainboard_init,
 };