[coreboot-gerrit] Change in coreboot[master]: mb/google/crota: Change ELAN touchscreen i2c address

[Terry Chen (Code Review)]

Terry Chen has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/64118 )

Change subject: mb/google/crota: Change ELAN touchscreen i2c address
......................................................................

mb/google/crota: Change ELAN touchscreen i2c address

Change ELAN touchscreen i2c address to 0x16

BUG=b:231684121
TEST=local build and tested with ELAN touch screen

Signed-off-by: Terry Chen 
Change-Id: Ide005a0681e236c3102090c1c36ab81926849000
---
M src/mainboard/google/brya/variants/crota/overridetree.cb
1 file changed, 2 insertions(+), 2 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/18/64118/1

diff --git a/src/mainboard/google/brya/variants/crota/overridetree.cb b/src/mainboard/google/brya/variants/crota/overridetree.cb
index 20820ac..d2603b5 100644
--- a/src/mainboard/google/brya/variants/crota/overridetree.cb
+++ b/src/mainboard/google/brya/variants/crota/overridetree.cb
@@ -155,7 +155,7 @@
    	end
    	device ref i2c3 on
    		chip drivers/i2c/hid
-				register "generic.hid" = ""ELAN9050""
+				register "generic.hid" = ""ELAN900C""
    			register "generic.desc" = ""ELAN Touchscreen""
    			register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
    			register "generic.probed" = "1"
@@ -172,7 +172,7 @@
    			register "generic.has_power_resource" = "1"
    			register "generic.disable_gpio_export_in_crs" = "1"
    			register "hid_desc_reg_offset" = "0x01"
-				device i2c 0x10 on end
+				device i2c 0x16 on end
    		end
    	end
    	device ref i2c5 on