Martin Roth (martin.roth@se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/3754
-gerrit
commit 08226017f98186941f10f72409ced4690cdc53c3 Author: Martin Roth martin.roth@se-eng.com Date: Tue Jul 9 21:39:46 2013 -0600
drivers: Fix spelling
Change-Id: Ib0d98e3ab5b2943c36f88765587e8963a4f49604 Signed-off-by: Martin Roth martin.roth@se-eng.com --- src/drivers/ati/ragexl/mach64.h | 4 ++-- src/drivers/elog/elog.c | 2 +- src/drivers/elog/gsmi.c | 2 +- src/drivers/i2c/w83795/w83795.c | 4 ++-- src/drivers/i2c/w83795/w83795.h | 4 ++-- src/drivers/oxford/oxpcie/oxpcie_early.c | 2 +- src/drivers/pc80/i8259.c | 2 +- src/drivers/pc80/mc146818rtc.c | 2 +- src/drivers/pc80/tpm.c | 2 +- 9 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/src/drivers/ati/ragexl/mach64.h b/src/drivers/ati/ragexl/mach64.h index e0dae0d..3acbef4 100644 --- a/src/drivers/ati/ragexl/mach64.h +++ b/src/drivers/ati/ragexl/mach64.h @@ -1045,7 +1045,7 @@ #define SCISSOR_TOP_FLAG 0x40 #define SCISSOR_BOTTOM_FLAG 0x80
-/* ATI VGA Extended Regsiters */ +/* ATI VGA Extended Registers */ #define sioATIEXT 0x1ce #define bioATIEXT 0x3ce
@@ -1057,7 +1057,7 @@ #define VGAGRA 0x3ce #define GRA06 0x06
-/* VGA Seququencer Registers */ +/* VGA Sequencer Registers */ #define VGASEQ 0x3c4 #define SEQ02 0x02 #define SEQ04 0x04 diff --git a/src/drivers/elog/elog.c b/src/drivers/elog/elog.c index 71e908b..6e89b5f 100644 --- a/src/drivers/elog/elog.c +++ b/src/drivers/elog/elog.c @@ -629,7 +629,7 @@ static int elog_flash_area_bootstrap(void)
/* * Shrink the log, deleting old entries and moving the - * remining ones to the front of the log. + * remaining ones to the front of the log. */ static int elog_shrink(void) { diff --git a/src/drivers/elog/gsmi.c b/src/drivers/elog/gsmi.c index dac1af4..b8bc253 100644 --- a/src/drivers/elog/gsmi.c +++ b/src/drivers/elog/gsmi.c @@ -96,7 +96,7 @@ u32 gsmi_exec(u8 command, u32 *param) break;
case GSMI_CMD_CLEAR_EVENT_LOG: - /* Get paramter buffer even though we don't use it */ + /* Get parameter buffer even though we don't use it */ cel = (struct gsmi_clear_eventlog_param *)(*param); if (!cel) break; diff --git a/src/drivers/i2c/w83795/w83795.c b/src/drivers/i2c/w83795/w83795.c index d2bd348..9c51fff 100644 --- a/src/drivers/i2c/w83795/w83795.c +++ b/src/drivers/i2c/w83795/w83795.c @@ -77,7 +77,7 @@ static void w83795_dts_enable(u8 dts_src) /* store bank3 regs first before enable DTS */
/* - * TD/TR1-4 termal diode by default + * TD/TR1-4 thermal diode by default * 0x00 Disable * 0x01 thermistors on motherboard * 0x10 different mode voltage @@ -169,7 +169,7 @@ static void w83795_set_fan(w83795_fan_mode_t mode) //SFIV TODO }
- /* Set Hystersis of Temperature (HT) */ + /* Set Hysteresis of Temperature (HT) */ //TODO }
diff --git a/src/drivers/i2c/w83795/w83795.h b/src/drivers/i2c/w83795/w83795.h index f8d5164..e18cd28 100644 --- a/src/drivers/i2c/w83795/w83795.h +++ b/src/drivers/i2c/w83795/w83795.h @@ -38,9 +38,9 @@ #define DTS_SRC_AMD_SBTSI (1 << 0)
#define W83795_REG_TSS(n) (0x209 + (n)) /* Temperature Source Selection Register */ -#define W83795_REG_TTTI(n) (0x260 + (n)) /* tarrget temperature W83795G/ADG will try to tune the fan output to keep */ +#define W83795_REG_TTTI(n) (0x260 + (n)) /* Target temperature W83795G/ADG will try to tune the fan output to keep */ #define W83795_REG_CTFS(n) (0x268 + (n)) /* Critical Temperature to Full Speed all fan */ -#define W83795_REG_HT(n) (0x270 + (n)) /* Hystersis of Temperature */ +#define W83795_REG_HT(n) (0x270 + (n)) /* Hysteresis of Temperature */ #define W83795_REG_DTSC 0x301 /* Digital Temperature Sensor Configuration */
#define W83795_REG_DTSE 0x302 /* Digital Temperature Sensor Enable */ diff --git a/src/drivers/oxford/oxpcie/oxpcie_early.c b/src/drivers/oxford/oxpcie/oxpcie_early.c index 9899619..2bca5c7 100644 --- a/src/drivers/oxford/oxpcie/oxpcie_early.c +++ b/src/drivers/oxford/oxpcie/oxpcie_early.c @@ -64,7 +64,7 @@ void oxford_init(void) CONFIG_OXFORD_OXPCIE_BRIDGE_SUBORDINATE);
/* Memory window for the OXPCIe952 card */ - // XXX is the calculation of base and limit corect? + // XXX is the calculation of base and limit correct? pci_write_config32(PCIE_BRIDGE, PCI_MEMORY_BASE, ((CONFIG_OXFORD_OXPCIE_BASE_ADDRESS & 0xffff0000) | ((CONFIG_OXFORD_OXPCIE_BASE_ADDRESS >> 16) & 0xff00))); diff --git a/src/drivers/pc80/i8259.c b/src/drivers/pc80/i8259.c index 78880c9..6f97c56 100644 --- a/src/drivers/pc80/i8259.c +++ b/src/drivers/pc80/i8259.c @@ -94,7 +94,7 @@ void setup_i8259(void) /* Now clear the interrupts through OCW1. * First we mask off all interrupts on the slave interrupt controller * then we mask off all interrupts but interrupt 2 on the master - * controller. This way the cascading stays alife. + * controller. This way the cascading stays alive. */ outb(ALL_IRQS, SLAVE_PIC_OCW1); outb(ALL_IRQS & ~IRQ2, MASTER_PIC_OCW1); diff --git a/src/drivers/pc80/mc146818rtc.c b/src/drivers/pc80/mc146818rtc.c index d91f207..be52454 100644 --- a/src/drivers/pc80/mc146818rtc.c +++ b/src/drivers/pc80/mc146818rtc.c @@ -132,7 +132,7 @@ void rtc_init(int invalid) /* * Avoid clearing pending interrupts in the resume path because * the Linux kernel relies on this to know if it should restart - * the RTC timerqueue if the wake was due to the RTC alarm. + * the RTC timer queue if the wake was due to the RTC alarm. */ if (acpi_slp_type == 3) return; diff --git a/src/drivers/pc80/tpm.c b/src/drivers/pc80/tpm.c index 9a4fc09..0ea0017 100644 --- a/src/drivers/pc80/tpm.c +++ b/src/drivers/pc80/tpm.c @@ -565,7 +565,7 @@ int tis_open(void) /* * tis_close() * - * terminate the currect session with the TPM by releasing the locked + * terminate the current session with the TPM by releasing the locked * locality. Returns 0 on success of TPM_DRIVER_ERR on failure (in case lock * removal did not succeed). */