coreboot-gerrit July 2023

coreboot-gerrit@coreboot.org

1 participants
4432 discussions

Change in coreboot[master]: soc/intel/tigerlake: Remove SW CM PM changes for FW CM
by Shreesh Chhabbi (Code Review) 07 Aug '23

07 Aug '23

Shreesh Chhabbi has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/42768 ) Change subject: soc/intel/tigerlake: Remove SW CM PM changes for FW CM ...................................................................... soc/intel/tigerlake: Remove SW CM PM changes for FW CM This patch is not to be merged. It is only for cherry-picking to build the image with FW CM configuration. Change-Id: I89db2557e33dc222ae1cb54401c738ded474202b Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi(a)intel.com> --- M src/soc/intel/tigerlake/acpi/tcss.asl M src/soc/intel/tigerlake/acpi/tcss_dma.asl M src/soc/intel/tigerlake/acpi/tcss_pcierp.asl M src/soc/intel/tigerlake/acpi/tcss_xhci.asl 4 files changed, 220 insertions(+), 219 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/68/42768/1 diff --git a/src/soc/intel/tigerlake/acpi/tcss.asl b/src/soc/intel/tigerlake/acpi/tcss.asl index 2fda693..48f2689 100644 --- a/src/soc/intel/tigerlake/acpi/tcss.asl +++ b/src/soc/intel/tigerlake/acpi/tcss.asl @@ -29,19 +29,9 @@ #define MAILBOX_BIOS_CMD_TCSS_DEVEN_INTERFACE 0x00000015 #define TCSS_DEVEN_MAILBOX_SUBCMD_GET_STATUS 0 /* Sub-command 0 */ #define TCSS_DEVEN_MAILBOX_SUBCMD_TCSS_CHANGE_REQ 1 /* Sub-command 1 */ + #define TCSS_IOM_ACK_TIMEOUT_IN_MS 100 -#define MCHBAR_TCSS_DEVEN_OFFSET 0x7090 - -#define REVISION_ID 1 -#define UNRECOGNIZED_UUID 0x4 -#define UNRECOGNIZED_REVISION 0x8 - -#define USB_TUNNELING 0x1 -#define DISPLAY_PORT_TUNNELING 0x2 -#define PCIE_TUNNELING 0x4 -#define INTER_DOMAIN_USB4_INTERNET_PROTOCOL 0x8 - Scope (\_SB) { /* Device base address */ @@ -136,46 +126,6 @@ } Return (0) } - - Method (_OSC, 4, Serialized) - { - /* - * Operating System Capabilities for USB4 - * Arg0: UUID = {23A0D13A-26AB-486C-9C5F-0FFA525A575A} - * Arg1: Revision ID = 1 - * Arg2: Count of entries (DWORD) in Arg3 (Integer): 3 - * Arg3: DWORD capabilities buffer: - * First DWORD: The standard definition bits are used to return errors. - * Second DWORD: OSPM support field for USB4, bits [31:0] reserved. - * Third DWORD: OSPM control field for USB4. - * bit 0: USB tunneling - * bit 1: DisplayPort tunneling - * bit 2: PCIe tunneling - * bit 3: Inter-domain USB4 internet protocol - * bit 31:4: reserved - * Return: The platform acknowledges the capabilities buffer by returning - * a buffer of DWORD of the same length. Masked/Cleared bits in the - * control field indicate that the platform does not permit OSPM - * control of the respectively capabilities or features. - */ - Name (CTRL, 0) /* Control field value */ - If (Arg0 == ToUUID("23A0D13A-26AB-486C-9C5F-0FFA525A575A")) { - CreateDWordField(Arg3, 0, CDW1) - CreateDWordField(Arg3, 2, CDW3) - CTRL = CDW3 - - If (Arg1 != REVISION_ID) { - CDW1 |= UNRECOGNIZED_REVISION - } - CTRL |= USB_TUNNELING | DISPLAY_PORT_TUNNELING | PCIE_TUNNELING | - INTER_DOMAIN_USB4_INTERNET_PROTOCOL - CDW3 = CTRL - Return (Arg3) - } Else { - CDW1 |= UNRECOGNIZED_UUID - Return (Arg3) - } - } } Scope (_GPE) @@ -302,25 +252,6 @@ Scope (\_SB.PCI0) { /* - * Operation region defined to access the TCSS_DEVEN. Get the MCHBAR in offset - * 0x48 in B0:D0:F0. TCSS device enable base address is in offset 0x7090 of MCHBAR. - */ - OperationRegion (TDEN, SystemMemory, (GMHB() + MCHBAR_TCSS_DEVEN_OFFSET), 0x4) - Field (TDEN, ByteAcc, NoLock, Preserve) - { - TRE0, 1, /* PCIE0_EN */ - TRE1, 1, /* PCIE1_EN */ - TRE2, 1, /* PCIE2_EN */ - TRE3, 1, /* PCIE3_EN */ - , 4, - THCE, 1, /* XHCI_EN */ - TDCE, 1, /* XDCI_EN */ - DME0, 1, /* TBT_DMA0_EN */ - DME1, 1, /* TBT_DMA1_EN */ - , 20 - } - - /* * Operation region defined to access the IOM REGBAR. Get the MCHBAR in offset * 0x48 in B0:D0:F0. REGBAR Base address is in offset 0x7110 of MCHBAR. */ @@ -493,6 +424,17 @@ } /* + * Below is a variable to store devices connect state for TBT PCIe RP before + * entering D3 cold. + * Value 0 - no device connected before enter D3 cold, no need to send + * CONNECT_TOPOLOGY in D3 cold exit. + * Value 1 - has device connected before enter D3 cold, need to send + * CONNECT_TOPOLOGY in D3 cold exit. + */ + Name (CTP0, 0) /* Variable of device connecet status for TBT0 group. */ + Name (CTP1, 0) /* Variable of device connecet status for TBT1 group. */ + + /* * TBT Group0 ON method */ Method (TG0N, 0) @@ -513,6 +455,28 @@ /* RP1 D3 cold exit. */ \_SB.PCI0.TRP1.D3CX() } + + /* + * Need to send Connect-Topology command when TBT host + * controller back to D0 from D3. + */ + If (\_SB.PCI0.TDM0.ALCT == 1) { + If (CTP0 == 1) { + /* + * Send Connect-Topology command if there is + * device present on PCIe RP. + */ + \_SB.PCI0.TDM0.CNTP() + + /* Indicate to wait Connect-Topology command. */ + \_SB.PCI0.TDM0.WACT = 1 + + /* Clear the connect states. */ + CTP0 = 0 + } + /* Disallow to send Connect-Topology command. */ + \_SB.PCI0.TDM0.ALCT = 0 + } } Else { Printf("Drop TG0N due to it is already exit D3 cold.") } @@ -536,10 +500,16 @@ Printf("Push TBT RPs to D3Cold together") If (\_SB.PCI0.TRP0.VDID != 0xFFFFFFFF) { + If (\_SB.PCI0.TRP0.PDSX == 1) { + CTP0 = 1 + } /* Put RP0 to D3 cold. */ \_SB.PCI0.TRP0.D3CE() } If (\_SB.PCI0.TRP1.VDID != 0xFFFFFFFF) { + If (\_SB.PCI0.TRP1.PDSX == 1) { + CTP0 = 1 + } /* Put RP1 to D3 cold. */ \_SB.PCI0.TRP1.D3CE() } @@ -568,6 +538,28 @@ /* RP3 D3 cold exit. */ \_SB.PCI0.TRP3.D3CX() } + + /* + * Need to send Connect-Topology command when TBT host + * controller back to D0 from D3. + */ + If (\_SB.PCI0.TDM1.ALCT == 1) { + If (CTP1 == 1) { + /* + * Send Connect-Topology command if there is + * device present on PCIe RP. + */ + \_SB.PCI0.TDM1.CNTP() + + /* Indicate to wait Connect-Topology command. */ + \_SB.PCI0.TDM1.WACT = 1 + + /* Clear the connect states. */ + CTP1 = 0 + } + /* Disallow to send Connect-Topology cmd. */ + \_SB.PCI0.TDM1.ALCT = 0 + } } Else { Printf("Drop TG1N due to it is already exit D3 cold.") } @@ -591,10 +583,16 @@ Printf("Push TBT RPs to D3Cold together") If (\_SB.PCI0.TRP2.VDID != 0xFFFFFFFF) { + If (\_SB.PCI0.TRP2.PDSX == 1) { + CTP1 = 1 + } /* Put RP2 to D3 cold. */ \_SB.PCI0.TRP2.D3CE() } If (\_SB.PCI0.TRP3.VDID != 0xFFFFFFFF) { + If (\_SB.PCI0.TRP3.PDSX == 1) { + CTP1 = 1 + } /* Put RP3 to D3 cold */ \_SB.PCI0.TRP3.D3CE() } @@ -765,11 +763,7 @@ Method (_STA, 0x0, NotSerialized) { - If (THCE == 1) { - Return (0x0F) - } Else { - Return (0x0) - } + Return (0x0F) } #include "tcss_xhci.asl" } @@ -787,11 +781,7 @@ Method (_STA, 0x0, NotSerialized) { - If (DME0 == 1) { - Return (0x0F) - } Else { - Return (0x0) - } + Return (0x0F) } #include "tcss_dma.asl" } @@ -809,11 +799,7 @@ Method (_STA, 0x0, NotSerialized) { - If (DME1 == 1) { - Return (0x0F) - } Else { - Return (0x0) - } + Return (0x0F) } #include "tcss_dma.asl" } @@ -832,13 +818,8 @@ Method (_STA, 0x0, NotSerialized) { - If (TRE0 == 1) { - Return (0x0F) - } Else { - Return (0x0) - } + Return (0x0F) } - Method (_INI) { LTEN = 0 @@ -862,13 +843,8 @@ Method (_STA, 0x0, NotSerialized) { - If (TRE1 == 1) { - Return (0x0F) - } Else { - Return (0x0) - } + Return (0x0F) } - Method (_INI) { LTEN = 0 @@ -892,13 +868,8 @@ Method (_STA, 0x0, NotSerialized) { - If (TRE2 == 1) { - Return (0x0F) - } Else { - Return (0x0) - } + Return (0x0F) } - Method (_INI) { LTEN = 0 @@ -922,13 +893,8 @@ Method (_STA, 0x0, NotSerialized) { - If (TRE3 == 1) { - Return (0x0F) - } Else { - Return (0x0) - } + Return (0x0F) } - Method (_INI) { LTEN = 0 diff --git a/src/soc/intel/tigerlake/acpi/tcss_dma.asl b/src/soc/intel/tigerlake/acpi/tcss_dma.asl index 8eab92f..66950a6 100644 --- a/src/soc/intel/tigerlake/acpi/tcss_dma.asl +++ b/src/soc/intel/tigerlake/acpi/tcss_dma.asl @@ -26,7 +26,118 @@ DMAD, 8 /* 31:24 DMA Active Delay */ } +/* + * TBT MailBox Command Method + * Arg0 - MailBox Cmd ID + */ +Method (ITMB, 1, Serialized) +{ + Local0 = Arg0 | 0x1 /* 0x1, PCIE2TBT_VLD_B */ + P2TB = Local0 +} + +/* + * Wait For Command Completed + * Arg0 - TimeOut value (unit is 1 millisecond) + */ +Method (WFCC, 1, Serialized) +{ + WTBS (Arg0) + P2TB = 0 + WTBC (Arg0) +} + +/* + * Wait For Command Set + * Arg0 - TimeOut value + */ +Method (WTBS, 1, Serialized) +{ + Local0 = Arg0 + While (Local0 > 0) { + /* Wait for Bit to Set. */ + If (TB2P & 0x1) { /* 0x1, TBT2PCIE_DON_R */ + Break + } + Local0-- + Sleep (1) + } +} + +/* + * Wait For Command Clear + * Arg0 - TimeOut value + */ +Method (WTBC, 1, Serialized) +{ + Local0 = Arg0 + While (Local0 > 0) { + /* Wait for Bit to Clear. */ + If ((TB2P & 0x1) != 0x0) { /* 0x1, TBT2PCIE_DON_R */ + Break + } + Local0-- + Sleep (1) + } +} + +/* + * TCSS TBT CONNECT_TOPOLOGY MailBox Command Method + */ +Method (CNTP, 0, Serialized) +{ + Local0 = 0 + /* Set Force Power if it is not set */ + If (DFPE == 0) { + DMAD = 0x22 + DFPE = 1 + /* + * Poll the TBT NVM FW Ready bit with timeout(default is 500ms) before + * send the TBT MailBox command. + */ + While ((INFR == 0) && (Local0 < 500)) { + Sleep (1) + Local0++ + } + } + If (Local0 != 100) { + ITMB (0x3E) /* 0x3E, PCIE2TBT_CONNECT_TOPOLOGY_COMMAND */ + } +} + Name (STAT, 0x1) /* Variable to save power state 1 - D0, 0 - D3C */ +Name (ALCT, 0x0) /* Connect-Topology cmd can be sent or not 1 - yes, 0 - no */ +/* + * Wait Connect-Topology cmd done + * 0 - no need to wait + * 1 - need to wait + * 2 - wait in progress + */ +Name (WACT, 0x0) + +Method (_PS0, 0, Serialized) +{ + If (WACT == 1) { + /* + * PCIe rp0/rp1 is grouped with DMA0 and PCIe rp2/rp3 is grouped wit DMA1. + * Whenever the Connect-Topology command is in the process, WACT flag is set 1. + * PCIe root ports 0/1/2/3/ and DMA 0/1 _PS0 method set WACT to 2 to indicate + * other thread's _PS0 to wait for the command completion. WACT is cleared to + * be 0 after command is finished. + */ + WACT = 2 + WFCC (100) /* Wait for command complete. */ + WACT = 0 + } ElseIf (WACT == 2) { + While (WACT != 0) { + Sleep (5) + } + } +} + +Method (_PS3, 0, Serialized) +{ +} Method (_S0W, 0x0) { @@ -67,6 +178,7 @@ { DD3E = 1 /* Enable DMA RTD3 */ STAT = 0 + ALCT = 0x1 /* Allow to send Connect-Topology cmd. */ } /* diff --git a/src/soc/intel/tigerlake/acpi/tcss_pcierp.asl b/src/soc/intel/tigerlake/acpi/tcss_pcierp.asl index 096a673..a7eafa4 100644 --- a/src/soc/intel/tigerlake/acpi/tcss_pcierp.asl +++ b/src/soc/intel/tigerlake/acpi/tcss_pcierp.asl @@ -64,7 +64,7 @@ */ Method (_DSM, 4, Serialized) { - Return (Buffer() { 0x00 }) + Return (Buffer() {0x00}) } Device (PXSX) @@ -195,8 +195,34 @@ If (PMEX == 1) { PMEX = 0 /* Disable Power Management SCI */ } - - Sleep(100) /* Wait for 100ms before return to OS starts any OS activities. */ + Sleep(100) /* Wait for 100ms before return to OS starts any DS activities. */ + If ((TUID == 0) || (TUID == 1)) { + If (\_SB.PCI0.TDM0.WACT == 1) { + /* + * Indicate other thread's _PS0 to wait the response. + */ + \_SB.PCI0.TDM0.WACT = 2 + \_SB.PCI0.TDM0.WFCC (10) /* Wait for command complete. */ + \_SB.PCI0.TDM0.WACT = 0 + } ElseIf (\_SB.PCI0.TDM0.WACT == 2) { + While (\_SB.PCI0.TDM0.WACT != 0) { + Sleep (5) + } + } + } Else { + If (\_SB.PCI0.TDM1.WACT == 1) { + /* + * Indicate other thread's _PS0 to wait the response. + */ + \_SB.PCI0.TDM1.WACT = 2 + \_SB.PCI0.TDM1.WFCC (10) /* Wait for command complete. */ + \_SB.PCI0.TDM1.WACT = 0 + } ElseIf (\_SB.PCI0.TDM1.WACT == 2) { + While (\_SB.PCI0.TDM1.WACT != 0) { + Sleep (5) + } + } + } } Method (_PS3, 0, Serialized) @@ -220,8 +246,8 @@ } Method (_DSD, 0) { - If ((TUID == 0) || (TUID == 1)) { - Return ( Package() { + Return ( + Package () { /* acpi_pci_bridge_d3 at ../drivers/pci/pci-acpi.c */ ToUUID("6211E2C0-58A3-4AF3-90E1-927A4E0C55A4"), Package () @@ -238,64 +264,9 @@ * (NumOfTBTRP - 1). */ Package (2) { "UID", TUID }, - }, - ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), - Package () { - Package (2) { "usb4-host-interface", \_SB.PCI0.TDM0 }, - Package (2) { "usb4-port-number", TUID }, } - }) - } ElseIf (TUID == 2) { - Return ( Package () { - /* acpi_pci_bridge_d3 at ../drivers/pci/pci-acpi.c */ - ToUUID("6211E2C0-58A3-4AF3-90E1-927A4E0C55A4"), - Package () - { - Package (2) { "HotPlugSupportInD3", 1 }, - }, - - /* pci_acpi_set_untrusted at ../drivers/pci/pci-acpi.c */ - ToUUID("EFCC06CC-73AC-4BC3-BFF0-76143807C389"), - Package () { - Package (2) { "ExternalFacingPort", 1 }, /* TBT/CIO port */ - /* - * UID of the TBT RP on platform, range is: 0, 1 ..., - * (NumOfTBTRP - 1). - */ - Package (2) { "UID", TUID }, - }, - ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), - Package () { - Package (2) { "usb4-host-interface", \_SB.PCI0.TDM1 }, - Package (2) { "usb4-port-number", 0 }, - } - }) - } Else { /* TUID == 3 */ - Return ( Package () { - /* acpi_pci_bridge_d3 at ../drivers/pci/pci-acpi.c */ - ToUUID("6211E2C0-58A3-4AF3-90E1-927A4E0C55A4"), - Package () - { - Package (2) { "HotPlugSupportInD3", 1 }, - }, - - /* pci_acpi_set_untrusted at ../drivers/pci/pci-acpi.c */ - ToUUID("EFCC06CC-73AC-4BC3-BFF0-76143807C389"), - Package () { - Package (2) { "ExternalFacingPort", 1 }, /* TBT/CIO port */ - /* - * UID of the TBT RP on platform, range is: 0, 1 ..., - * (NumOfTBTRP - 1). - */ - Package (2) { "UID", TUID }, - }, - ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), - Package () { - Package (2) { "usb4-host-interface", \_SB.PCI0.TDM1 }, - Package (2) { "usb4-port-number", 1 }, - } - }) - } + } + ) } Method (_S0W, 0x0, NotSerialized) diff --git a/src/soc/intel/tigerlake/acpi/tcss_xhci.asl b/src/soc/intel/tigerlake/acpi/tcss_xhci.asl index c32deed..259b92a 100644 --- a/src/soc/intel/tigerlake/acpi/tcss_xhci.asl +++ b/src/soc/intel/tigerlake/acpi/tcss_xhci.asl @@ -118,68 +118,20 @@ Device (SS01) { Name (_ADR, 0x02) - Method (_DSD, 0, NotSerialized) - { - Return( Package () - { - ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), - Package () - { - Package (2) { "usb4-host-interface", \_SB.PCI0.TDM0 }, - Package (2) { "usb4-port-number", 0 } - } - }) - } } Device (SS02) { Name (_ADR, 0x03) - Method (_DSD, 0, NotSerialized) - { - Return( Package () - { - ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), - Package () - { - Package (2) { "usb4-host-interface", \_SB.PCI0.TDM0 }, - Package (2) { "usb4-port-number", 1 } - } - }) - } } Device (SS03) { Name (_ADR, 0x04) - Method (_DSD, 0, NotSerialized) - { - Return( Package () - { - ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), - Package () - { - Package (2) { "usb4-host-interface", \_SB.PCI0.TDM1 }, - Package (2) { "usb4-port-number", 0 } - } - }) - } } Device (SS04) { Name (_ADR, 0x05) - Method (_DSD, 0, NotSerialized) - { - Return( Package () - { - ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), - Package () - { - Package (2) { "usb4-host-interface", \_SB.PCI0.TDM1 }, - Package (2) { "usb4-port-number", 1 } - } - }) - } } } -- To view, visit https://review.coreboot.org/c/coreboot/+/42768 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I89db2557e33dc222ae1cb54401c738ded474202b Gerrit-Change-Number: 42768 Gerrit-PatchSet: 1 Gerrit-Owner: Shreesh Chhabbi <shreesh.chhabbi(a)intel.com> Gerrit-MessageType: newchange

2 3

Change in coreboot[master]: Enable TCSS devices PM based on platform device tree setting
by Shreesh Chhabbi (Code Review) 07 Aug '23

07 Aug '23

Hello John Zhao, Shreesh Chhabbi, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/42771 to review the following change. Change subject: Enable TCSS devices PM based on platform device tree setting ...................................................................... Enable TCSS devices PM based on platform device tree setting Signed-off-by: John Zhao <john.zhao(a)intel.com> Change-Id: I3044d5f4a882849abd87e313e65189659d503bfb Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi(a)intel.corp-partner.google.com> --- M src/soc/intel/tigerlake/acpi/tcss.asl 1 file changed, 58 insertions(+), 7 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/71/42771/1 diff --git a/src/soc/intel/tigerlake/acpi/tcss.asl b/src/soc/intel/tigerlake/acpi/tcss.asl index 48f2689..24ca891 100644 --- a/src/soc/intel/tigerlake/acpi/tcss.asl +++ b/src/soc/intel/tigerlake/acpi/tcss.asl @@ -252,6 +252,25 @@ Scope (\_SB.PCI0) { /* + * Operation region defined to access the TCSS_DEVEN. Get the MCHBAR in offset + * 0x48 in B0:D0:F0. TCSS device enable base address is in offset 0x7090 of MCHBAR. + */ + OperationRegion (TDEN, SystemMemory, (GMHB() + 0x7090), 0x4) + Field (TDEN, ByteAcc, NoLock, Preserve) + { + TRE0, 1, /* PCIE0_EN */ + TRE1, 1, /* PCIE1_EN */ + TRE2, 1, /* PCIE2_EN */ + TRE3, 1, /* PCIE3_EN */ + , 4, + THCE, 1, /* XHCI_EN */ + TDCE, 1, /* XDCI_EN */ + DME0, 1, /* TBT_DMA0_EN */ + DME1, 1, /* TBT_DMA1_EN */ + , 20 + } + + /* * Operation region defined to access the IOM REGBAR. Get the MCHBAR in offset * 0x48 in B0:D0:F0. REGBAR Base address is in offset 0x7110 of MCHBAR. */ @@ -763,7 +782,11 @@ Method (_STA, 0x0, NotSerialized) { - Return (0x0F) + If (THCE == 1) { + Return (0x0F) + } Else { + Return (0x0) + } } #include "tcss_xhci.asl" } @@ -781,7 +804,11 @@ Method (_STA, 0x0, NotSerialized) { - Return (0x0F) + If (DME0 == 1) { + Return (0x0F) + } Else { + Return (0x0) + } } #include "tcss_dma.asl" } @@ -799,7 +826,11 @@ Method (_STA, 0x0, NotSerialized) { - Return (0x0F) + If (DME1 == 1) { + Return (0x0F) + } Else { + Return (0x0) + } } #include "tcss_dma.asl" } @@ -818,8 +849,13 @@ Method (_STA, 0x0, NotSerialized) { - Return (0x0F) + If (TRE0 == 1) { + Return (0x0F) + } Else { + Return (0x0) + } } + Method (_INI) { LTEN = 0 @@ -843,8 +879,13 @@ Method (_STA, 0x0, NotSerialized) { - Return (0x0F) + If (TRE1 == 1) { + Return (0x0F) + } Else { + Return (0x0) + } } + Method (_INI) { LTEN = 0 @@ -868,8 +909,13 @@ Method (_STA, 0x0, NotSerialized) { - Return (0x0F) + If (TRE2 == 1) { + Return (0x0F) + } Else { + Return (0x0) + } } + Method (_INI) { LTEN = 0 @@ -893,8 +939,13 @@ Method (_STA, 0x0, NotSerialized) { - Return (0x0F) + If (TRE3 == 1) { + Return (0x0F) + } Else { + Return (0x0) + } } + Method (_INI) { LTEN = 0 -- To view, visit https://review.coreboot.org/c/coreboot/+/42771 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I3044d5f4a882849abd87e313e65189659d503bfb Gerrit-Change-Number: 42771 Gerrit-PatchSet: 1 Gerrit-Owner: Shreesh Chhabbi <shreesh.chhabbi(a)intel.com> Gerrit-Reviewer: John Zhao <john.zhao(a)intel.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-Reviewer: Shreesh Chhabbi <shreesh.chhabbi(a)intel.corp-partner.google.com> Gerrit-MessageType: newchange

2 3

Change in coreboot[master]: mb/supermicro/x10slm-f: Add new superio support to board's Kconfig
by Christoph Pomaska (Code Review) 07 Aug '23

07 Aug '23

Christoph Pomaska has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/34905 ) Change subject: mb/supermicro/x10slm-f: Add new superio support to board's Kconfig ...................................................................... mb/supermicro/x10slm-f: Add new superio support to board's Kconfig Since the superio support code didnt exist when the board was ported, the Kconfig was not modified yet to add support for the BMC-chip. This commit fixes the missing Kconfig entry. Change-Id: I4f89c2ddcc00327e01d0a83fc13cfa862e6abd70 Signed-off-by: Christoph Pomaska <c.pomaska(a)hosting.de> --- M src/mainboard/supermicro/x10slm-f/Kconfig 1 file changed, 4 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/05/34905/1 diff --git a/src/mainboard/supermicro/x10slm-f/Kconfig b/src/mainboard/supermicro/x10slm-f/Kconfig index 3945c09..6effff2 100644 --- a/src/mainboard/supermicro/x10slm-f/Kconfig +++ b/src/mainboard/supermicro/x10slm-f/Kconfig @@ -20,15 +20,16 @@ def_bool y select BOARD_ROMSIZE_KB_16384 select CPU_INTEL_HASWELL - select DRIVERS_ASPEED_AST2050 # Supports AST2400 too. + select SOUTHBRIDGE_INTEL_LYNXPOINT select HAVE_ACPI_RESUME select HAVE_ACPI_TABLES select HAVE_OPTION_TABLE select HAVE_CMOS_DEFAULT select NORTHBRIDGE_INTEL_HASWELL select SERIRQ_CONTINUOUS_MODE - select SOUTHBRIDGE_INTEL_LYNXPOINT - select SUPERIO_NUVOTON_NCT6776 + select DRIVERS_ASPEED_AST2050 # Supports AST2400 too. + select SUPERIO_ASPEED_AST2400 # The board's BMC + select SUPERIO_NUVOTON_NCT6776 # the board's superio select SUPERIO_NUVOTON_NCT6776_COM_A config CBFS_SIZE -- To view, visit https://review.coreboot.org/c/coreboot/+/34905 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I4f89c2ddcc00327e01d0a83fc13cfa862e6abd70 Gerrit-Change-Number: 34905 Gerrit-PatchSet: 1 Gerrit-Owner: Christoph Pomaska <github(a)aufmachen.jetzt> Gerrit-MessageType: newchange

9 45

Change in coreboot[master]: mb/intel/jslrvp: Update pad termination for SD related GPIOs
by Maulik V Vaghela (Code Review) 07 Aug '23

07 Aug '23

Hello Ronak Kanabar, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/49022 to review the following change. Change subject: mb/intel/jslrvp: Update pad termination for SD related GPIOs ...................................................................... mb/intel/jslrvp: Update pad termination for SD related GPIOs Change pad termination for SD related GPIO from NONE to NATIVE. This change aligns SoC gpio to be in line with dedede and also fixes the issue of sporadic detection of SD card. BUG=None BRANCH=dedede TEST=Check SD card detection works everytime Change-Id: I0c60cd3edf0ae561846115a0dd3c4fd5b3e26b9c Signed-off-by: Maulik V Vaghela <maulik.v.vaghela(a)intel.com> Signed-off-by: Ronak Kanabar <ronak.kanabar(a)intel.com> --- M src/mainboard/intel/jasperlake_rvp/variants/jslrvp/gpio.c 1 file changed, 6 insertions(+), 6 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/22/49022/1 diff --git a/src/mainboard/intel/jasperlake_rvp/variants/jslrvp/gpio.c b/src/mainboard/intel/jasperlake_rvp/variants/jslrvp/gpio.c index 21e25ab..48ff97b 100644 --- a/src/mainboard/intel/jasperlake_rvp/variants/jslrvp/gpio.c +++ b/src/mainboard/intel/jasperlake_rvp/variants/jslrvp/gpio.c @@ -188,25 +188,25 @@ PAD_CFG_NF(GPP_F18, NONE, DEEP, NF1), /* SD_SDIO_CMD */ - PAD_CFG_NF(GPP_G0, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_G0, NATIVE, DEEP, NF1), /* SD_SDIO_D0 */ - PAD_CFG_NF(GPP_G1, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_G1, NATIVE, DEEP, NF1), /* SD_SDIO_D1 */ - PAD_CFG_NF(GPP_G2, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_G2, NATIVE, DEEP, NF1), /* SD_SDIO_D2 */ - PAD_CFG_NF(GPP_G3, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_G3, NATIVE, DEEP, NF1), /* SD_SDIO_D3 */ - PAD_CFG_NF(GPP_G4, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_G4, NATIVE, DEEP, NF1), /* SD_SDIO_CD_N */ PAD_CFG_NF(GPP_G5, UP_20K, PWROK, NF1), /* SD_SDIO_CLK */ - PAD_CFG_NF(GPP_G6, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_G6, NATIVE, DEEP, NF1), /* SD_SDIO_WP */ PAD_CFG_NF(GPP_G7, DN_20K, PWROK, NF1), -- To view, visit https://review.coreboot.org/c/coreboot/+/49022 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I0c60cd3edf0ae561846115a0dd3c4fd5b3e26b9c Gerrit-Change-Number: 49022 Gerrit-PatchSet: 1 Gerrit-Owner: Maulik V Vaghela <maulik.v.vaghela(a)intel.com> Gerrit-Reviewer: Ronak Kanabar <ronak.kanabar(a)intel.com> Gerrit-MessageType: newchange

4 3

Change in coreboot[master]: Documentation: added more payload links and descriptions
by Zoltan Baldaszti (Code Review) 07 Aug '23

07 Aug '23

Zoltan Baldaszti has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/45829 ) Change subject: Documentation: added more payload links and descriptions ...................................................................... Documentation: added more payload links and descriptions Change-Id: I13c10edbc7fbb7017641ab025982c658cbeb3610 Signed-off-by: Zoltan Baldaszti <bztemail(a)gmail.com> --- M Documentation/payloads.md 1 file changed, 35 insertions(+), 7 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/29/45829/1 diff --git a/Documentation/payloads.md b/Documentation/payloads.md index eee841e..bee8393 100644 --- a/Documentation/payloads.md +++ b/Documentation/payloads.md @@ -23,17 +23,45 @@ coreboot payload, but these days this function is available directly in the CorebootPayloadPkg part of its source tree. +## iPXE + +[iPXE](https://ipxe.org) is the leading open source network boot firmware. +It provides a full PXE Implementation enchaced with additional features such +as booting from HTTP, iSCSI, FCoE, AoE, wireless, WAN, infiniband. + ## GRUB2 -GRUB2 was originally written as a bootloader and that's its most popular -purpose, but it can also be compiled as a coreboot payload. +[GRUB2](https://www.gnu.org/software/grub) was originally written as a +bootloader and that's its most popular purpose, but it can also be compiled +as a coreboot payload. + +## U-Boot + +[U-Boot](https://www.denx.de/wiki/U-Boot) is a boot loader for Embedded boards +based on PowerPC, ARM, MIPS and several other processors, which can be +installed in a boot ROM and used to initialize and test the hardware or to +download and run application code. + +## FILO + +[FILO](https://www.coreboot.org/FILO) loads boot images from local filesystem, +without help from legacy BIOS services. Expected usage is to flash it into +the BIOS ROM together with coreboot. + +## BOOTBOOT + +[BOOTBOOT](https://gitlab.com/bztsrc/bootboot) is a multi-platform, +architecture agnostic boot protocol. The protocol describes how to boot an +ELF64 or PE32+ executable inside an initial ram disk image into clean 64 bit +mode. This version uses libpayload to do that. Initrd can be in ROM or on +disk a GPT partition or a file on a FAT formatted ESP partition. ## Linux -There are several projects using Linux as a payload (which was the -configuration that gave coreboot its original name, LinuxBIOS). That kernel is -often rather small and serves to load a current kernel from somewhere, e.g. -disk or network, and run that through the kexec mechanism. +There are several projects using [Linux](https://kernel.org) as a payload +(which was the configuration that gave coreboot its original name, LinuxBIOS). +That kernel is often rather small and serves to load a current kernel from +somewhere, e.g. disk or network, and run that through the kexec mechanism. Two aspects emphasized by proponents of Linux-as-a-payload are the availability of well-tested, battle-hardened drivers (as compared to @@ -51,4 +79,4 @@ For more details have a look at [heads-wiki]. [Heads]: https://github.com/osresearch/heads -[heads-wiki]: http://osresearch.net/ \ No newline at end of file +[heads-wiki]: http://osresearch.net/ -- To view, visit https://review.coreboot.org/c/coreboot/+/45829 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I13c10edbc7fbb7017641ab025982c658cbeb3610 Gerrit-Change-Number: 45829 Gerrit-PatchSet: 1 Gerrit-Owner: Zoltan Baldaszti <bztemail(a)gmail.com> Gerrit-MessageType: newchange

5 9

Change in coreboot[master]: [TEST] abuild: Default to !CHROMEOS
by Nico Huber (Code Review) 07 Aug '23

07 Aug '23

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/49056 ) Change subject: [TEST] abuild: Default to !CHROMEOS ...................................................................... [TEST] abuild: Default to !CHROMEOS Change-Id: I9ae4bc22f70be5b8d8efa35f0cc8aa2d36a5531a Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M util/abuild/abuild 1 file changed, 1 insertion(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/56/49056/1 diff --git a/util/abuild/abuild b/util/abuild/abuild index 408de12..59da54c 100755 --- a/util/abuild/abuild +++ b/util/abuild/abuild @@ -655,7 +655,7 @@ clean_objs=false verboseopt='V=0' customizing="" -configoptions="" +configoptions="# CONFIG_CHROMEOS is not set\n" # testclass needs to be undefined if not used for variable expansion to work unset testclass while true ; do -- To view, visit https://review.coreboot.org/c/coreboot/+/49056 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I9ae4bc22f70be5b8d8efa35f0cc8aa2d36a5531a Gerrit-Change-Number: 49056 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

5 13

Change in coreboot[master]: soc/intel/common: Add romstage common stage file
by Bernardo Perez Priego (Code Review) 07 Aug '23

07 Aug '23

Bernardo Perez Priego has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37628 ) Change subject: soc/intel/common: Add romstage common stage file ...................................................................... soc/intel/common: Add romstage common stage file This patch will ensures all intel soc is using common stage files to make coreboot design flow align across all socs. CPU, SA, PCH, MCH programming sequence might be different between socs but the function call should route from same location across all soc. Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego(a)intel.com> Change-Id: I06d43ac29f5e87ce731a470e5e145adea07ece4c --- M src/cpu/intel/car/romstage.c A src/soc/intel/common/basecode/include/intelbasecode/romstage.h A src/soc/intel/common/basecode/romstage/Makefile.inc A src/soc/intel/common/basecode/romstage/romstage.c 4 files changed, 162 insertions(+), 6 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/28/37628/1 diff --git a/src/cpu/intel/car/romstage.c b/src/cpu/intel/car/romstage.c index 1f8eb9a..55d3c9d 100644 --- a/src/cpu/intel/car/romstage.c +++ b/src/cpu/intel/car/romstage.c @@ -52,9 +52,6 @@ for (i = 0; i < num_guards; i++) stack_base[i] = stack_guard; - if (CONFIG(VBOOT_EARLY_EC_SYNC)) - vboot_sync_ec(); - mainboard_romstage_entry(); /* Check the stack. */ @@ -64,9 +61,6 @@ printk(BIOS_DEBUG, "Smashed stack detected in romstage!\n"); } - if (CONFIG(SMM_TSEG)) - smm_list_regions(); - prepare_and_run_postcar(&early_mtrrs); /* We do not return here. */ } diff --git a/src/soc/intel/common/basecode/include/intelbasecode/romstage.h b/src/soc/intel/common/basecode/include/intelbasecode/romstage.h new file mode 100644 index 0000000..0cebbbf --- /dev/null +++ b/src/soc/intel/common/basecode/include/intelbasecode/romstage.h @@ -0,0 +1,37 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2019 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef SOC_INTEL_COMMON_BASECODE_ROMSTAGE_H +#define SOC_INTEL_COMMON_BASECODE_ROMSTAGE_H + +#include <stddef.h> +#include <stdint.h> +#include <fsp/soc_binding.h> + +struct romstage_ops { + void (*soc_early_init)(void); + void (*soc_init)(void); + void (*pch_early_init)(void); + void (*pch_init)(void); + void (*cpu_early_init)(void); + void (*cpu_init)(void); + bool (*is_s3wake)(void); + void (*soc_mem_init_params)(FSP_M_CONFIG *mupd); +}; + +/* SoC Override function */ +struct romstage_ops *soc_get_ops(void); + +#endif diff --git a/src/soc/intel/common/basecode/romstage/Makefile.inc b/src/soc/intel/common/basecode/romstage/Makefile.inc new file mode 100644 index 0000000..29763fb --- /dev/null +++ b/src/soc/intel/common/basecode/romstage/Makefile.inc @@ -0,0 +1 @@ +romstage-y += romstage.c diff --git a/src/soc/intel/common/basecode/romstage/romstage.c b/src/soc/intel/common/basecode/romstage/romstage.c new file mode 100644 index 0000000..55c4ab5 --- /dev/null +++ b/src/soc/intel/common/basecode/romstage/romstage.c @@ -0,0 +1,124 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/early_variables.h> +#include <romstage_common.h> +#include <cpu/x86/pae.h> +#include <intelbasecode/romstage.h> +#include <intelblocks/systemagent.h> +#include <soc/iomap.h> +#include <soc/romstage.h> + +static const struct romstage_ops s_romstage_ops; + +__weak struct romstage_ops *soc_get_ops(void) +{ + return (struct romstage_ops *)&s_romstage_ops; +} + +void romstage_early_init(void) +{ + struct romstage_ops *rs_ops = soc_get_ops(); + + rs_ops->soc_early_init(); + rs_ops->pch_early_init(); + rs_ops->cpu_early_init(); +} + +void romstage_init(void) +{ + struct romstage_ops *rs_ops = soc_get_ops(); + + rs_ops->soc_init(); + rs_ops->pch_init(); + rs_ops->cpu_init(); +} + +void romstage_cmn_soc_early_init(void) +{ + systemagent_early_init(); + heci_init(HECI1_BASE_ADDRESS); +} + +void romstage_cmn_soc_init(void) +{ +} + +void romstage_cmn_pch_early_init(void) +{ +} + +void romstage_cmn_cpu_early_init(void) +{ +} + +void romstage_cmn_pch_init(void) +{ +} + +void romstage_cmn_cpu_init(void) +{ +} + +bool romstage_cmn_is_s3wake(void) +{ + struct chipset_power_state *ps = pmc_get_power_state(); + return pmc_fill_power_state(ps) == ACPI_S3; +} + +void romstage_cmn_soc_mem_init_param(FSP_M_CONFIG *m_cfg) +{ +} + +static const struct romstage_ops s_romstage_ops = { + &romstage_cmn_soc_early_init, + &romstage_cmn_soc_init, + &romstage_cmn_pch_early_init, + &romstage_cmn_pch_init, + &romstage_cmn_cpu_early_init, + &romstage_cmn_cpu_init, + &romstage_cmn_is_s3wake, + &romstage_cmn_mb_mem_init_param, + &romstage_cmn_soc_mem_init_param +}; + +/* + Main romstage function +*/ +asmlinkage void mainboard_romstage_entry(void) +{ + if (CONFIG(VBOOT_EARLY_EC_SYNC)) + vboot_sync_ec(rs_ops->fill_power_state()); + + romstage_early_init(); + romstage_init(); + fsp_memory_init(rs_ops->is_s3wake()); + + if (CONFIG(SMM_TSEG)) + smm_list_regions(); +} + +/* + Callback function for FSP memory initialization +*/ +void platform_fsp_memory_init_params_cb(FSPM_UPD *mupd, uint32_t version) +{ + struct romstage_ops *rs_ops = soc_get_ops(); + + FSP_M_CONFIG *m_cfg; + rs_ops->soc_mem_init_params(m_cfg); + mainboard_memory_init_params(m_cfg); +} + -- To view, visit https://review.coreboot.org/c/coreboot/+/37628 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I06d43ac29f5e87ce731a470e5e145adea07ece4c Gerrit-Change-Number: 37628 Gerrit-PatchSet: 1 Gerrit-Owner: Bernardo Perez Priego <bernardo.perez.priego(a)intel.com> Gerrit-MessageType: newchange

5 16

Change in coreboot[master]: soc/intel/common: Move reset request into intel_fw_update
by Sridhar Siricilla (Code Review) 07 Aug '23

07 Aug '23

Sridhar Siricilla has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/46819 ) Change subject: soc/intel/common: Move reset request into intel_fw_update ...................................................................... soc/intel/common: Move reset request into intel_fw_update The patch implements below functionalities: 1. Move reset request from CSE FW Update 2. Implement intel_fw_sync(), which triggers UCODE and CSE Lite FW update and trigger global reset if one of the FW update requests reset. This patch prevents triggering global reset having separate reset request in UCODE update or CSE Lite FW Update. Signed-off-by: Sridhar Siricilla <sridhar.siricilla(a)intel.com> Change-Id: I50da4206de05e552de68af7fa0afaef2dac33004 --- A src/soc/intel/common/basecode/fw_update/fw_update.c M src/soc/intel/common/block/cse/cse_lite.c M src/soc/intel/common/block/include/intelblocks/cse.h 3 files changed, 105 insertions(+), 52 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/19/46819/1 diff --git a/src/soc/intel/common/basecode/fw_update/fw_update.c b/src/soc/intel/common/basecode/fw_update/fw_update.c new file mode 100644 index 0000000..45d2d968 --- /dev/null +++ b/src/soc/intel/common/basecode/fw_update/fw_update.c @@ -0,0 +1,63 @@ +#include <bootstate.h> +#include <console/console.h> +#include <halt.h> +#include <intelbasecode/ucode_update.h> +#include <reset.h> +#include <security/vboot/misc.h> +#include <security/vboot/vboot_common.h> +#include <soc/intel/common/reset.h> +#include <vb2_api.h> +#include <intelblocks/cse.h> + +__weak void cse_board_reset(void) +{ + /* Default weak implementation, does nothing. */ +} + +void trigger_global_reset() { + + cse_board_reset(); + + /* If board does not perform the reset, then perform global_reset */ + do_global_reset(); + + die("cse_lite: Failed to reset the system\n"); +} + +static uint8_t update_ucode(void) +{ + if (CONFIG(INTEL_TOP_SWAP_MULTI_FIT_UCODE_UPDATE)) { + uint8_t reset_req = 0; + if (update_ucode_and_topswap_state(&reset_req)) { + /* Update failed */ + if (CONFIG(VBOOT)) { + printk(BIOS_DEBUG, "ucode: Failed to update microcode\n"); + struct vb2_context *ctx = vboot_get_context(); + if (ctx == NULL) + die("ucode: Failed to trigger recovery mode\n"); + vb2api_fail(ctx, 0x36, 0x0); + vboot_save_data(ctx); + vboot_reboot(); + } + } + return reset_req; + } +} + +static void intel_fw_update(void *unused) +{ + if (update_ucode() || cse_fw_sync()) + trigger_global_reset(); +} + + +#if CONFIG(SOC_INTEL_TIGERLAKE) || CONFIG(SOC_INTEL_JASPERLAKE) + +/* + * This needs to happen after the MRC cache write to avoid a 2nd + * memory training sequence. + */ +BOOT_STATE_INIT_ENTRY(BS_DEV_RESOURCES, BS_ON_ENTRY, intel_fw_update, NULL); +#else +BOOT_STATE_INIT_ENTRY(BS_PRE_DEVICE, BS_ON_ENTRY, intel_fw_update, NULL); +#endif diff --git a/src/soc/intel/common/block/cse/cse_lite.c b/src/soc/intel/common/block/cse/cse_lite.c index 77a8d5f..6006e13 100644 --- a/src/soc/intel/common/block/cse/cse_lite.c +++ b/src/soc/intel/common/block/cse/cse_lite.c @@ -414,43 +414,28 @@ return true; } -__weak void cse_board_reset(void) -{ - /* Default weak implementation, does nothing. */ -} - -/* Set the CSE's next boot partition and issues system reset */ -static bool cse_set_and_boot_from_next_bp(enum boot_partition_id bp) -{ - if (!cse_set_next_boot_partition(bp)) - return false; - - /* Allow the board to perform a reset for CSE RO<->RW jump */ - cse_board_reset(); - - /* If board does not perform the reset, then perform global_reset */ - do_global_reset(); - - die("cse_lite: Failed to reset the system\n"); - - /* Control never reaches here */ - return false; -} - -static bool cse_boot_to_rw(const struct cse_bp_info *cse_bp_info) +static bool cse_set_next_bp_to_rw(const struct cse_bp_info *cse_bp_info, uint8_t *reset_req) { if (cse_get_current_bp(cse_bp_info) == RW) return true; - return cse_set_and_boot_from_next_bp(RW); + if (!cse_set_next_boot_partition(RW)) + return false; + + *reset_req = 1; + return true; } -static bool cse_boot_to_ro(const struct cse_bp_info *cse_bp_info) +static bool cse_set_next_bp_to_ro(const struct cse_bp_info *cse_bp_info, uint8_t *reset_req) { if (cse_get_current_bp(cse_bp_info) == RO) return true; - return cse_set_and_boot_from_next_bp(RO); + if (!cse_set_next_boot_partition(RO)) + return false; + + *reset_req = 1; + return truel } static bool cse_get_rw_rdev(struct region_device *rdev) @@ -701,7 +686,7 @@ * It returns true if RW partition doesn't indicate BP_STATUS_DATA_FAILURE * otherwise false if any operation fails. */ -static bool cse_fix_data_failure_err(const struct cse_bp_info *cse_bp_info) +static bool cse_fix_data_failure_err(const struct cse_bp_info *cse_bp_info, uint8_t *reset_req) { /* * If RW partition status indicates BP_STATUS_DATA_FAILURE, @@ -715,7 +700,7 @@ if (!cse_data_clear_request(cse_bp_info)) return false; - return cse_boot_to_rw(cse_bp_info); + return cse_set_next_bp_to_rw(cse_bp_info, reset_req); } static bool cse_erase_rw_region(const struct region_device *target_rdev) @@ -798,16 +783,19 @@ } static bool cse_prep_for_rw_update(const struct cse_bp_info *cse_bp_info, - const struct cse_cbfs_rw_info *source_info) + const struct cse_cbfs_rw_info *source_info, uint8_t *reset_req) { /* * To set CSE's operation mode to HMRFPO mode: * 1. Ensure CSE to boot from RO(BP1) * 2. Send HMRFPO_ENABLE command to CSE */ - if (!cse_boot_to_ro(cse_bp_info)) + if (!cse_set_boot_to_ro(cse_bp_info, reset_req)) return false; + if (*reset_req) + return true; + if (cse_is_downgrade_instance(cse_bp_info, source_info) && !cse_data_clear_request(cse_bp_info)) { printk(BIOS_ERR, "cse_lite: CSE FW downgrade is aborted\n"); @@ -818,7 +806,8 @@ } static enum csme_failure_reason cse_trigger_fw_update(const struct cse_bp_info *cse_bp_info, - const struct cse_cbfs_rw_info *source_info, struct region_device *target_rdev) + const struct cse_cbfs_rw_info *source_info, struct region_device *target_rdev, + uint8_t *reset_req) { struct region_device source_rdev; @@ -836,7 +825,7 @@ } } - if (!cse_prep_for_rw_update(cse_bp_info, source_info)) { + if (!cse_prep_for_rw_update(cse_bp_info, source_info, reset_req)) { rv = CSE_LITE_SKU_COMMUNICATION_ERROR; goto error_exit; } @@ -850,7 +839,7 @@ } static uint8_t cse_fw_update(const struct cse_bp_info *cse_bp_info, - const struct region_device *source_info_rdev) + const struct region_device *source_info_rdev, uint8_t *reset_req) { struct region_device target_rdev; @@ -869,7 +858,7 @@ if (cse_is_update_required(cse_bp_info, &source_info, &target_rdev)) { printk(BIOS_DEBUG, "cse_lite: CSE RW update is initiated\n"); - return cse_trigger_fw_update(cse_bp_info, &source_info, &target_rdev); + return cse_trigger_fw_update(cse_bp_info, &source_info, &target_rdev, reset_req); } if (!cse_is_rw_bp_status_valid(cse_bp_info)) @@ -878,19 +867,19 @@ return 0; } -void cse_fw_sync(void *unused) +uint8_t cse_fw_sync(void) { static struct get_bp_info_rsp cse_bp_info; if (vboot_recovery_mode_enabled()) { printk(BIOS_DEBUG, "cse_lite: Skip switching to RW in the recovery path\n"); - return; + return 0; } /* If CSE SKU type is not Lite, skip enabling CSE Lite SKU */ if (!cse_is_hfs3_fw_sku_lite()) { printk(BIOS_ERR, "cse_lite: Not a CSE Lite SKU\n"); - return; + return 0; } if (!cse_get_bp_info(&cse_bp_info)) { @@ -898,9 +887,15 @@ cse_trigger_recovery(CSE_LITE_SKU_COMMUNICATION_ERROR); } - if (!cse_fix_data_failure_err(&cse_bp_info.bp_info)) + uint8_t reset_req = 0; + + if (!cse_fix_data_failure_err(&cse_bp_info.bp_info, &reset_req)) cse_trigger_recovery(CSE_LITE_SKU_DATA_WIPE_ERROR); + if(reset_req) + return reset_req; + + /* * If CSE CBFS RW blob metadata is present in CBFS, then trigger CSE firmware update. * The driver triggers recovery if CSE CBFS RW metadata is present in the CBFS and CSE @@ -909,23 +904,17 @@ uint8_t rv; struct region_device source_info_rdev; if (cse_get_cbfs_rdev(&source_info_rdev)) { - rv = cse_fw_update(&cse_bp_info.bp_info, &source_info_rdev); + rv = cse_fw_update(&cse_bp_info.bp_info, &source_info_rdev, &reset_req); if (rv) cse_trigger_recovery(rv); } - if (!cse_boot_to_rw(&cse_bp_info.bp_info)) { + if(reset_req) + return reset_req; + + if (!cse_set_next_bp_to_rw(&cse_bp_info.bp_info, &reset_req)) { printk(BIOS_ERR, "cse_lite: Failed to switch to RW\n"); cse_trigger_recovery(CSE_LITE_SKU_RW_SWITCH_ERROR); } + return reset_req; } - -#if CONFIG(SOC_INTEL_TIGERLAKE) || CONFIG(SOC_INTEL_JASPERLAKE) -/* - * This needs to happen after the MRC cache write to avoid a 2nd - * memory training sequence. - */ -BOOT_STATE_INIT_ENTRY(BS_DEV_RESOURCES, BS_ON_ENTRY, cse_fw_sync, NULL); -#else -BOOT_STATE_INIT_ENTRY(BS_PRE_DEVICE, BS_ON_ENTRY, cse_fw_sync, NULL); -#endif diff --git a/src/soc/intel/common/block/include/intelblocks/cse.h b/src/soc/intel/common/block/include/intelblocks/cse.h index f554933..0ac5d74 100644 --- a/src/soc/intel/common/block/include/intelblocks/cse.h +++ b/src/soc/intel/common/block/include/intelblocks/cse.h @@ -216,8 +216,9 @@ * boot from RW and triggers recovery mode if CSE fails to jump to RW. * In software triggered recovery mode, the function allows CSE to boot from whatever is * currently selected partition. + * Returns 1 if reset is required otherwise 0. */ -void cse_fw_sync(void *unused); +uint8_t cse_fw_sync(void); /* Perform a board-specific reset sequence for CSE RO<->RW jump */ void cse_board_reset(void); -- To view, visit https://review.coreboot.org/c/coreboot/+/46819 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I50da4206de05e552de68af7fa0afaef2dac33004 Gerrit-Change-Number: 46819 Gerrit-PatchSet: 1 Gerrit-Owner: Sridhar Siricilla <sridhar.siricilla(a)intel.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newchange

6 14

Change in coreboot[master]: [TESTME]lenovo/x220: Attempt to fix broken DRAM init
by Patrick Rudolph (Code Review) 07 Aug '23

07 Aug '23

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/39043 ) Change subject: [TESTME]lenovo/x220: Attempt to fix broken DRAM init ...................................................................... [TESTME]lenovo/x220: Attempt to fix broken DRAM init Enable power on WWAN as it has SMBUS connected. Might resolv an issue where DRAM init fails as no EEPROM is found on the bus. Untested. Change-Id: Ia7a2ca370124ecf743b000998b56855d5ed8f573 Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M src/ec/lenovo/h8/Makefile.inc M src/mainboard/lenovo/x220/early_init.c 2 files changed, 15 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/43/39043/1 diff --git a/src/ec/lenovo/h8/Makefile.inc b/src/ec/lenovo/h8/Makefile.inc index 51c11be..9c8687a 100644 --- a/src/ec/lenovo/h8/Makefile.inc +++ b/src/ec/lenovo/h8/Makefile.inc @@ -18,6 +18,8 @@ ramstage-y += panic.c endif +romstage += wwan.c + ramstage-y += h8.c ramstage-y += bluetooth.c ramstage-y += wwan.c diff --git a/src/mainboard/lenovo/x220/early_init.c b/src/mainboard/lenovo/x220/early_init.c index 3429c1b..ae16f0c 100644 --- a/src/mainboard/lenovo/x220/early_init.c +++ b/src/mainboard/lenovo/x220/early_init.c @@ -24,6 +24,7 @@ #include <southbridge/intel/bd82x6x/pch.h> #include <southbridge/intel/common/gpio.h> #include <cpu/x86/msr.h> +#include <ec/lenovo/h8/h8.h> void mainboard_fill_pei_data(struct pei_data *pei_data) { @@ -74,6 +75,18 @@ *pei_data = pei_data_template; } +void mainboard_early_init(int s3_resume) +{ + /* + * The WWAN slot has SMBUS connected. Turn on power to make sure + * SMBUS is usable and DRAM init will succeed. + * ramstage will turn it off, in case it's not needed. + * TODO: Does GPIO42 (SMB_3B_EN) help here? + */ + if (h8_has_wwan()) + h8_wwan_enable(true); +} + void mainboard_get_spd(spd_raw_data *spd, bool id_only) { read_spd (&spd[0], 0x50, id_only); -- To view, visit https://review.coreboot.org/c/coreboot/+/39043 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ia7a2ca370124ecf743b000998b56855d5ed8f573 Gerrit-Change-Number: 39043 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-MessageType: newchange

6 13

Change in coreboot[master]: amdfwtool: Use *number in config file as NVRAM entry
by Bao Zheng (Code Review) 07 Aug '23

07 Aug '23

Hello Zheng Bao, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/49015 to review the following change. Change subject: amdfwtool: Use *number in config file as NVRAM entry ...................................................................... amdfwtool: Use *number in config file as NVRAM entry Add the entry like XXXX_FW_TYPE_STRING *0xXXXXX to config file. Then the required size of space will be allocated related to the firmware type. Change-Id: I98c94b4087f8a174f7d5753a30695a10f1b796ae Signed-off-by: Zheng Bao <fishbaozi(a)gmail.com> --- M src/soc/amd/picasso/Makefile.inc M src/soc/amd/stoneyridge/Makefile.inc M src/southbridge/amd/pi/hudson/Makefile.inc M util/amdfwtool/amdfwtool.c M util/amdfwtool/amdfwtool.h M util/amdfwtool/data_parse.c 6 files changed, 35 insertions(+), 13 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/15/49015/1 diff --git a/src/soc/amd/picasso/Makefile.inc b/src/soc/amd/picasso/Makefile.inc index a0f3ec4..08d2817 100644 --- a/src/soc/amd/picasso/Makefile.inc +++ b/src/soc/amd/picasso/Makefile.inc @@ -213,7 +213,7 @@ # Add all the files listed in the config file POUND_SIGN=$(call strip_quotes, "\#") -DEP_FILES= $(patsubst %,$(FIRMWARE_LOCATION)/%, $(shell sed -e /^$(POUND_SIGN)/d -e /^FIRMWARE_LOCATION/d $(CONFIG_AMDFW_CONFIG_FILE) | awk '{print $$2}' )) +DEP_FILES= $(patsubst %,$(FIRMWARE_LOCATION)/%, $(shell sed -e /^$(POUND_SIGN)/d -e /*/d -e /^FIRMWARE_LOCATION/d $(CONFIG_AMDFW_CONFIG_FILE) | awk '{print $$2}' )) AMDFW_COMMON_ARGS=$(OPT_PSP_APCB_FILES) \ $(OPT_PSP_APCB_FILES_BK) \ diff --git a/src/soc/amd/stoneyridge/Makefile.inc b/src/soc/amd/stoneyridge/Makefile.inc index 969f512..f7ef699 100644 --- a/src/soc/amd/stoneyridge/Makefile.inc +++ b/src/soc/amd/stoneyridge/Makefile.inc @@ -141,7 +141,7 @@ # Add all the files listed in the config file POUND_SIGN=$(call strip_quotes, "\#") -DEP_FILES= $(patsubst %,$(FIRMWARE_LOCATION)/%, $(shell sed -e /^$(POUND_SIGN)/d -e /^FIRMWARE_LOCATION/d $(CONFIG_AMDFW_CONFIG_FILE) | awk '{print $$2}' )) +DEP_FILES= $(patsubst %,$(FIRMWARE_LOCATION)/%, $(shell sed -e /^$(POUND_SIGN)/d -e /*/d -e /^FIRMWARE_LOCATION/d $(CONFIG_AMDFW_CONFIG_FILE) | awk '{print $$2}' )) $(obj)/amdfw.rom: $(call strip_quotes, $(CONFIG_STONEYRIDGE_XHCI_FWM_FILE)) \ $(call strip_quotes, $(CONFIG_STONEYRIDGE_GEC_FWM_FILE)) \ diff --git a/src/southbridge/amd/pi/hudson/Makefile.inc b/src/southbridge/amd/pi/hudson/Makefile.inc index 215a5a1..3d96823 100644 --- a/src/southbridge/amd/pi/hudson/Makefile.inc +++ b/src/southbridge/amd/pi/hudson/Makefile.inc @@ -110,7 +110,7 @@ # Add all the files listed in the config file POUND_SIGN=$(call strip_quotes, "\#") -DEP_FILES= $(patsubst %,$(FIRMWARE_LOCATION)/%, $(shell sed -e /^$(POUND_SIGN)/d -e /^FIRMWARE_LOCATION/d $(CONFIG_AMDFW_CONFIG_FILE) | awk '{print $$2}' )) +DEP_FILES= $(patsubst %,$(FIRMWARE_LOCATION)/%, $(shell sed -e /^$(POUND_SIGN)/d -e /*/d -e /^FIRMWARE_LOCATION/d $(CONFIG_AMDFW_CONFIG_FILE) | awk '{print $$2}' )) $(obj)/amdfw.rom: $(call strip_quotes, $(CONFIG_HUDSON_XHCI_FWM_FILE)) \ $(call strip_quotes, $(CONFIG_HUDSON_IMC_FWM_FILE)) \ diff --git a/util/amdfwtool/amdfwtool.c b/util/amdfwtool/amdfwtool.c index f167e5e..b6c9c8d 100644 --- a/util/amdfwtool/amdfwtool.c +++ b/util/amdfwtool/amdfwtool.c @@ -775,6 +775,13 @@ ctx->current = ALIGN(ctx->current + bytes, BLOB_ALIGNMENT); count++; + } else if (fw_table[i].blank_size != 0) { + pspdir->entries[count].type = fw_table[i].type; + pspdir->entries[count].subprog = fw_table[i].subprog; + pspdir->entries[count].rsvd = 0; + pspdir->entries[count].size = (uint32_t)fw_table[i].blank_size; + pspdir->entries[count].addr = RUN_CURRENT(*ctx); + count++; } else { /* This APU doesn't have this firmware. */ } @@ -1018,11 +1025,15 @@ fw_table[i].type == AMD_BIOS_APCB_BK) ctx->current = ALIGN( ctx->current, ERASE_ALIGNMENT); - bytes = copy_blob(BUFF_CURRENT(*ctx), - fw_table[i].filename, BUFF_ROOM(*ctx)); - if (bytes <= 0) { - free(ctx->rom); - exit(1); + if (fw_table[i].filename != NULL) { + bytes = copy_blob(BUFF_CURRENT(*ctx), + fw_table[i].filename, BUFF_ROOM(*ctx)); + if (bytes <= 0) { + free(ctx->rom); + exit(1); + } + } else if (fw_table[i].blank_size != 0){ + bytes = fw_table[i].blank_size; } biosdir->entries[count].size = (uint32_t)bytes; diff --git a/util/amdfwtool/amdfwtool.h b/util/amdfwtool/amdfwtool.h index 6ae4675..beaa360 100644 --- a/util/amdfwtool/amdfwtool.h +++ b/util/amdfwtool/amdfwtool.h @@ -109,6 +109,7 @@ uint8_t subprog; int level; uint64_t other; + uint32_t blank_size; } amd_fw_entry; typedef struct _amd_cb_config { diff --git a/util/amdfwtool/data_parse.c b/util/amdfwtool/data_parse.c index 017c689..de31242 100644 --- a/util/amdfwtool/data_parse.c +++ b/util/amdfwtool/data_parse.c @@ -254,7 +254,10 @@ while (psp_tableptr->type != AMD_FW_INVALID) { /* instance are not used in PSP table */ if (psp_tableptr->type == fw_type && psp_tableptr->subprog == subprog) { - psp_tableptr->filename = filename; + if (filename[0] == '*') + psp_tableptr->blank_size = strtoull(&filename[1], NULL, 16); + else + psp_tableptr->filename = filename; break; } psp_tableptr++; @@ -330,7 +333,10 @@ if (bhd_tableptr->type == fw_type && bhd_tableptr->subpr == subprog && bhd_tableptr->inst == instance) { - bhd_tableptr->filename = filename; + if (filename[0] == '*') + bhd_tableptr->blank_size = strtoull(&filename[1], NULL, 16); + else + bhd_tableptr->filename = filename; break; } bhd_tableptr++; @@ -440,9 +446,13 @@ continue; } else { path_filename = malloc(MAX_LINE_SIZE); - strcpy(path_filename, dir); - strcat(path_filename, "/"); - strcat(path_filename, &(oneline[match[2].rm_so])); + if (oneline[match[2].rm_so] == '*') { + strcpy(path_filename, &(oneline[match[2].rm_so])); + } else { + strcpy(path_filename, dir); + strcat(path_filename, "/"); + strcat(path_filename, &(oneline[match[2].rm_so])); + } if (find_register_fw_filename_psp_dir( &(oneline[match[1].rm_so]), -- To view, visit https://review.coreboot.org/c/coreboot/+/49015 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I98c94b4087f8a174f7d5753a30695a10f1b796ae Gerrit-Change-Number: 49015 Gerrit-PatchSet: 1 Gerrit-Owner: Bao Zheng <fishbaozi(a)gmail.com> Gerrit-Reviewer: Felix Held <felix-coreboot(a)felixheld.de> Gerrit-Reviewer: Jason Glenesk <jason.glenesk(a)gmail.com> Gerrit-Reviewer: Marshall Dawson <marshalldawson3rd(a)gmail.com> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-Reviewer: Zheng Bao Gerrit-MessageType: newchange

5 53

← Newer
1
2
3
4
5
6
7
8
9
...
444
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit July 2023