coreboot-gerrit September 2020

coreboot-gerrit@coreboot.org

1 participants
2629 discussions

Change in coreboot[master]: prodrive/hermes: Disable USB power on S5
by Patrick Rudolph (Code Review) 10 Jun '23

10 Jun '23

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/44526 ) Change subject: prodrive/hermes: Disable USB power on S5 ...................................................................... prodrive/hermes: Disable USB power on S5 Change-Id: I9d78e8966b7ccc06b04045fda6bda36eab464051 Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M src/mainboard/prodrive/hermes/dsdt.asl 1 file changed, 10 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/26/44526/1 diff --git a/src/mainboard/prodrive/hermes/dsdt.asl b/src/mainboard/prodrive/hermes/dsdt.asl index 4d8d170..c1bed5f 100644 --- a/src/mainboard/prodrive/hermes/dsdt.asl +++ b/src/mainboard/prodrive/hermes/dsdt.asl @@ -20,6 +20,16 @@ #include <soc/intel/common/block/acpi/acpi/northbridge.asl> #include <soc/intel/cannonlake/acpi/southbridge.asl> } + Method (MPTS,1) { + if (Arg0 == 5) { + /* Disable USB power on S5 */ + \_SB.PCI0.CTXS(GPP_G0) + \_SB.PCI0.CTXS(GPP_G1) + \_SB.PCI0.CTXS(GPP_G2) + \_SB.PCI0.CTXS(GPP_G3) + \_SB.PCI0.CTXS(GPP_G4) + } + } } #include <southbridge/intel/common/acpi/sleepstates.asl> -- To view, visit https://review.coreboot.org/c/coreboot/+/44526 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I9d78e8966b7ccc06b04045fda6bda36eab464051 Gerrit-Change-Number: 44526 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-MessageType: newchange

2 1

Change in coreboot[master]: mtrr.h: refine _POW2_MASK
by ky0ko (Code Review) 10 Jun '23

10 Jun '23

ky0ko has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/44845 ) Change subject: mtrr.h: refine _POW2_MASK ...................................................................... mtrr.h: refine _POW2_MASK this patch adjusts _POW2_MASK to work with rom sizes between 64KiB and 512MiB, additionally fixing incorrectness for sizes 128MiB and above that previously were present. Change-Id: I0272c0c43cba44f6fbfb5dc539509b4ed9b92e75 Signed-off-by: ky0ko <ky0ko(a)disroot.org> --- M src/include/cpu/x86/mtrr.h 1 file changed, 4 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/45/44845/1 diff --git a/src/include/cpu/x86/mtrr.h b/src/include/cpu/x86/mtrr.h index 42964b0..fd4159d 100644 --- a/src/include/cpu/x86/mtrr.h +++ b/src/include/cpu/x86/mtrr.h @@ -176,9 +176,11 @@ #endif /* !defined(__ASSEMBLER__) */ /* Align up/down to next power of 2, suitable for assembler - too. Range of result 256kB to 128MB is good enough here. */ + too. Range works from 64kB to 512MB. */ #define _POW2_MASK(x) ((x>>1)|(x>>2)|(x>>3)|(x>>4)|(x>>5)| \ - (x>>6)|(x>>7)|(x>>8)|((1<<18)-1)) + (x>>6)|(x>>7)|(x>>8)|(x>>9)|(x>>10)| \ + (x>>11)|(x>>12)|(x>>13)|((1<<16)-1)) + #define _ALIGN_UP_POW2(x) ((x + _POW2_MASK(x)) & ~_POW2_MASK(x)) #define _ALIGN_DOWN_POW2(x) ((x) & ~_POW2_MASK(x)) -- To view, visit https://review.coreboot.org/c/coreboot/+/44845 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I0272c0c43cba44f6fbfb5dc539509b4ed9b92e75 Gerrit-Change-Number: 44845 Gerrit-PatchSet: 1 Gerrit-Owner: ky0ko <ky0ko(a)disroot.org> Gerrit-MessageType: newchange

4 4

Change in coreboot[master]: [WIP] 3rdparty/libgfxinit: Update submodule pointer
by Angel Pons (Code Review) 10 Jun '23

10 Jun '23

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/44071 ) Change subject: [WIP] 3rdparty/libgfxinit: Update submodule pointer ...................................................................... [WIP] 3rdparty/libgfxinit: Update submodule pointer This brings in Bay Trail support. Change-Id: Ia4b265862e2a7cce8e3d272dee9d22aba8358fa5 Signed-off-by: Angel Pons <th3fanbus(a)gmail.com> --- M 3rdparty/libgfxinit 1 file changed, 1 insertion(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/71/44071/1 diff --git a/3rdparty/libgfxinit b/3rdparty/libgfxinit index 3318bf2..729fff7 160000 --- a/3rdparty/libgfxinit +++ b/3rdparty/libgfxinit @@ -1 +1 @@ -Subproject commit 3318bf26803c77d41b18bef6d7ae4e051b97f9f2 +Subproject commit 729fff7de5070bbfd2975065549b1f9fbf057976 -- To view, visit https://review.coreboot.org/c/coreboot/+/44071 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ia4b265862e2a7cce8e3d272dee9d22aba8358fa5 Gerrit-Change-Number: 44071 Gerrit-PatchSet: 1 Gerrit-Owner: Angel Pons <th3fanbus(a)gmail.com> Gerrit-MessageType: newchange

2 6

Change in coreboot[master]: mb/volteer: Disable Precision Time Measurement for PCIe RP 9
by Shreesh Chhabbi (Code Review) 10 Jun '23

10 Jun '23

Hello Shreesh Chhabbi, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/45302 to review the following change. Change subject: mb/volteer: Disable Precision Time Measurement for PCIe RP 9 ...................................................................... mb/volteer: Disable Precision Time Measurement for PCIe RP 9 Change-Id: Id42d0485a5ff8cb2c1886c460e6ec2f1fb540516 Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi(a)intel.corp-partner.google.com> --- M src/mainboard/google/volteer/variants/baseboard/devicetree.cb 1 file changed, 3 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/02/45302/1 diff --git a/src/mainboard/google/volteer/variants/baseboard/devicetree.cb b/src/mainboard/google/volteer/variants/baseboard/devicetree.cb index 1b8b0d6..eb1f1a9 100644 --- a/src/mainboard/google/volteer/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/volteer/variants/baseboard/devicetree.cb @@ -99,6 +99,9 @@ register "PcieClkSrcUsage[5]" = "0xFF" register "PcieClkSrcUsage[6]" = "0xFF" + # PCIe RP PTM + register "PciePtm[8]" = "0" + # Enable SATA register "SataEnable" = "1" register "SataMode" = "0" -- To view, visit https://review.coreboot.org/c/coreboot/+/45302 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Id42d0485a5ff8cb2c1886c460e6ec2f1fb540516 Gerrit-Change-Number: 45302 Gerrit-PatchSet: 1 Gerrit-Owner: Shreesh Chhabbi <shreesh.chhabbi(a)intel.com> Gerrit-Reviewer: Shreesh Chhabbi <shreesh.chhabbi(a)intel.corp-partner.google.com> Gerrit-MessageType: newchange

2 1

Change in coreboot[master]: nb/intel/sandybridge: Read spds only once if measured boot is enabled
by Bill XIE (Code Review) 10 Jun '23

10 Jun '23

Bill XIE has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/39969 ) Change subject: nb/intel/sandybridge: Read spds only once if measured boot is enabled ...................................................................... nb/intel/sandybridge: Read spds only once if measured boot is enabled Without considering s3 resume, spd may be used various times depending on various condition. If spd is stored in CBFS and read various times, PCR value may become inconsistent. As mentioned in CB:39906, in order to avoid this, we could read spd exactly once, and use the data read out various times, when measured boot is enabled. Change-Id: I02cad7e85d5e66fd9efb674e4dc9868233f6c233 Signed-off-by: Bill XIE <persmule(a)gmail.com> --- M src/northbridge/intel/sandybridge/raminit.c 1 file changed, 27 insertions(+), 4 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/69/39969/1 diff --git a/src/northbridge/intel/sandybridge/raminit.c b/src/northbridge/intel/sandybridge/raminit.c index b096a11..f3c81a6 100644 --- a/src/northbridge/intel/sandybridge/raminit.c +++ b/src/northbridge/intel/sandybridge/raminit.c @@ -98,6 +98,17 @@ } } +static bool spd_is_available(const spd_raw_data spds[], size_t num_spd) +{ + /* An available spd should at least have an non-zero id */ + size_t i, j, sum = 0; + for (i = 0; i < num_spd; i++) { + for (j = 117; j < 128; j++) + sum += spds[i][j]; + } + return (sum > 0); +} + static void dram_find_spds_ddr3(spd_raw_data *spd, ramctr_timing *ctrl) { int dimms = 0, ch_dimms; @@ -222,6 +233,8 @@ struct region_device rdev; ramctr_timing *ctrl_cached = NULL; + if (CONFIG(TPM_MEASURED_BOOT)) + memset(spds, 0, sizeof(spds)); MCHBAR32(SAPMCTL) |= 1; /* Wait for ME to be ready */ @@ -271,8 +284,14 @@ /* Verify MRC cache for fast boot */ if (!s3resume && ctrl_cached) { /* Load SPD unique information data. */ - memset(spds, 0, sizeof(spds)); - mainboard_get_spd(spds, 1); + if (CONFIG(TPM_MEASURED_BOOT)) { + /* if CONFIG(TPM_MEASURED_BOOT), + we manage to get spds only ONCE */ + mainboard_get_spd(spds, 0); + } else { + memset(spds, 0, sizeof(spds)); + mainboard_get_spd(spds, 1); + } /* check SPD CRC16 to make sure the DIMMs haven't been replaced */ fast_boot = verify_crc16_spds_ddr3(spds, ctrl_cached); @@ -307,8 +326,12 @@ ctrl.cpu = cpuid; /* Get DDR3 SPD data */ - memset(spds, 0, sizeof(spds)); - mainboard_get_spd(spds, 0); + if (!CONFIG(TPM_MEASURED_BOOT) || !spd_is_available(spds, 4)) { + /* without CONFIG(TPM_MEASURED_BOOT), the previous read may + only contains id, so read it again */ + memset(spds, 0, sizeof(spds)); + mainboard_get_spd(spds, 0); + } dram_find_spds_ddr3(spds, &ctrl); err = try_init_dram_ddr3(&ctrl, fast_boot, s3resume, me_uma_size); -- To view, visit https://review.coreboot.org/c/coreboot/+/39969 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I02cad7e85d5e66fd9efb674e4dc9868233f6c233 Gerrit-Change-Number: 39969 Gerrit-PatchSet: 1 Gerrit-Owner: Bill XIE <persmule(a)hardenedlinux.org> Gerrit-MessageType: newchange

4 12

Change in coreboot[master]: soc/intel/common: Call pci_dev_enable_bus_master() from .final ops
by Subrata Banik (Code Review) 10 Jun '23

10 Jun '23

Subrata Banik has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/44512 ) Change subject: soc/intel/common: Call pci_dev_enable_bus_master() from .final ops ...................................................................... soc/intel/common: Call pci_dev_enable_bus_master() from .final ops Enable PCI_COMMAND_MASTER for all PCI controller to ensure device can behave as a bus master. Otherwise, the device can not generate PCI accesses. BUG=b:154900210 TEST=Able to build and boot CML and TGL platform. Change-Id: Ife65f6029d2f966e321f616e85f59f4c37c42145 Signed-off-by: Subrata Banik <subrata.banik(a)intel.com> --- M src/soc/intel/common/block/cse/cse.c M src/soc/intel/common/block/dsp/dsp.c M src/soc/intel/common/block/dtt/dtt.c M src/soc/intel/common/block/graphics/graphics.c M src/soc/intel/common/block/hda/hda.c M src/soc/intel/common/block/i2c/i2c.c M src/soc/intel/common/block/ipu/ipu.c M src/soc/intel/common/block/lpc/lpc.c M src/soc/intel/common/block/p2sb/p2sb.c M src/soc/intel/common/block/pcie/pcie.c M src/soc/intel/common/block/pmc/pmc.c M src/soc/intel/common/block/sata/sata.c M src/soc/intel/common/block/scs/mmc.c M src/soc/intel/common/block/scs/sd.c M src/soc/intel/common/block/smbus/smbus.c M src/soc/intel/common/block/spi/spi.c M src/soc/intel/common/block/sram/sram.c M src/soc/intel/common/block/systemagent/systemagent.c M src/soc/intel/common/block/uart/uart.c M src/soc/intel/common/block/xdci/xdci.c M src/soc/intel/common/block/xhci/xhci.c 21 files changed, 21 insertions(+), 7 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/12/44512/1 diff --git a/src/soc/intel/common/block/cse/cse.c b/src/soc/intel/common/block/cse/cse.c index 4b598e2..5d73812 100644 --- a/src/soc/intel/common/block/cse/cse.c +++ b/src/soc/intel/common/block/cse/cse.c @@ -870,6 +870,7 @@ .read_resources = pci_dev_read_resources, .enable_resources = pci_dev_enable_resources, .init = pci_dev_init, + .final = pci_dev_enable_bus_master, .ops_pci = &pci_dev_ops_pci, }; diff --git a/src/soc/intel/common/block/dsp/dsp.c b/src/soc/intel/common/block/dsp/dsp.c index 776a22b..80f758a 100644 --- a/src/soc/intel/common/block/dsp/dsp.c +++ b/src/soc/intel/common/block/dsp/dsp.c @@ -8,6 +8,7 @@ .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, + .final = pci_dev_enable_bus_master, .ops_pci = &pci_dev_ops_pci, .scan_bus = scan_static_bus, }; diff --git a/src/soc/intel/common/block/dtt/dtt.c b/src/soc/intel/common/block/dtt/dtt.c index f396993..a04bc7b 100644 --- a/src/soc/intel/common/block/dtt/dtt.c +++ b/src/soc/intel/common/block/dtt/dtt.c @@ -14,6 +14,7 @@ .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .scan_bus = scan_generic_bus, + .final = pci_dev_enable_bus_master, .ops_pci = &pci_dev_ops_pci, }; diff --git a/src/soc/intel/common/block/graphics/graphics.c b/src/soc/intel/common/block/graphics/graphics.c index 38d41df..0aa832b 100644 --- a/src/soc/intel/common/block/graphics/graphics.c +++ b/src/soc/intel/common/block/graphics/graphics.c @@ -170,6 +170,7 @@ .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = gma_init, + .final = pci_dev_enable_bus_master, .ops_pci = &pci_dev_ops_pci, #if CONFIG(HAVE_ACPI_TABLES) .acpi_fill_ssdt = gma_generate_ssdt, diff --git a/src/soc/intel/common/block/hda/hda.c b/src/soc/intel/common/block/hda/hda.c index e4bcf99..2f8bc24 100644 --- a/src/soc/intel/common/block/hda/hda.c +++ b/src/soc/intel/common/block/hda/hda.c @@ -53,6 +53,7 @@ #if CONFIG(SOC_INTEL_COMMON_BLOCK_HDA_VERB) .init = hda_init, #endif + .final = pci_dev_enable_bus_master, .ops_pci = &pci_dev_ops_pci, .scan_bus = scan_static_bus }; diff --git a/src/soc/intel/common/block/i2c/i2c.c b/src/soc/intel/common/block/i2c/i2c.c index 0de3bd3..5b2a755 100644 --- a/src/soc/intel/common/block/i2c/i2c.c +++ b/src/soc/intel/common/block/i2c/i2c.c @@ -168,6 +168,7 @@ .enable_resources = pci_dev_enable_resources, .scan_bus = scan_smbus, .ops_i2c_bus = &dw_i2c_bus_ops, + .final = pci_dev_enable_bus_master, .ops_pci = &pci_dev_ops_pci, .init = dw_i2c_device_init, #if CONFIG(HAVE_ACPI_TABLES) diff --git a/src/soc/intel/common/block/ipu/ipu.c b/src/soc/intel/common/block/ipu/ipu.c index f7b01aa..58030a1 100644 --- a/src/soc/intel/common/block/ipu/ipu.c +++ b/src/soc/intel/common/block/ipu/ipu.c @@ -8,6 +8,7 @@ .set_resources = pci_dev_set_resources, .enable_resources = pci_bus_enable_resources, .scan_bus = scan_generic_bus, + .final = pci_dev_enable_bus_master, .ops_pci = &pci_dev_ops_pci, }; diff --git a/src/soc/intel/common/block/lpc/lpc.c b/src/soc/intel/common/block/lpc/lpc.c index 212fd70..a16f10f 100644 --- a/src/soc/intel/common/block/lpc/lpc.c +++ b/src/soc/intel/common/block/lpc/lpc.c @@ -105,6 +105,7 @@ #endif .init = lpc_soc_init, .scan_bus = scan_static_bus, + .final = pci_dev_enable_bus_master, .ops_pci = &pci_dev_ops_pci, }; diff --git a/src/soc/intel/common/block/p2sb/p2sb.c b/src/soc/intel/common/block/p2sb/p2sb.c index d97cd8d..f7c7545 100644 --- a/src/soc/intel/common/block/p2sb/p2sb.c +++ b/src/soc/intel/common/block/p2sb/p2sb.c @@ -124,6 +124,7 @@ static const struct device_operations device_ops = { .read_resources = read_resources, .set_resources = noop_set_resources, + .final = pci_dev_enable_bus_master, .ops_pci = &pci_dev_ops_pci, }; diff --git a/src/soc/intel/common/block/pcie/pcie.c b/src/soc/intel/common/block/pcie/pcie.c index e506905..55ada78 100644 --- a/src/soc/intel/common/block/pcie/pcie.c +++ b/src/soc/intel/common/block/pcie/pcie.c @@ -64,6 +64,7 @@ .enable_resources = pci_bus_enable_resources, .init = pch_pcie_init, .scan_bus = pciexp_scan_bridge, + .final = pci_dev_enable_bus_master, .ops_pci = &pcie_ops, }; diff --git a/src/soc/intel/common/block/pmc/pmc.c b/src/soc/intel/common/block/pmc/pmc.c index 24f28e3..44a77b2 100644 --- a/src/soc/intel/common/block/pmc/pmc.c +++ b/src/soc/intel/common/block/pmc/pmc.c @@ -103,6 +103,7 @@ .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = pmc_soc_init, + .final = pci_dev_enable_bus_master, .ops_pci = &pci_dev_ops_pci, .scan_bus = scan_static_bus, }; diff --git a/src/soc/intel/common/block/sata/sata.c b/src/soc/intel/common/block/sata/sata.c index 1889700..eb1d8c6 100644 --- a/src/soc/intel/common/block/sata/sata.c +++ b/src/soc/intel/common/block/sata/sata.c @@ -4,17 +4,11 @@ #include <device/pci.h> #include <device/pci_ids.h> -static void sata_final(struct device *dev) -{ - /* Set Bus Master */ - pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER); -} - static struct device_operations sata_ops = { .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, - .final = sata_final, + .final = pci_dev_enable_bus_master, .ops_pci = &pci_dev_ops_pci, }; diff --git a/src/soc/intel/common/block/scs/mmc.c b/src/soc/intel/common/block/scs/mmc.c index 6772f74..debec19 100644 --- a/src/soc/intel/common/block/scs/mmc.c +++ b/src/soc/intel/common/block/scs/mmc.c @@ -67,6 +67,7 @@ .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = mmc_soc_init, + .final = pci_dev_enable_bus_master, .ops_pci = &pci_dev_ops_pci, }; diff --git a/src/soc/intel/common/block/scs/sd.c b/src/soc/intel/common/block/scs/sd.c index 04ebb13..17d508f 100644 --- a/src/soc/intel/common/block/scs/sd.c +++ b/src/soc/intel/common/block/scs/sd.c @@ -48,6 +48,7 @@ #if CONFIG(HAVE_ACPI_TABLES) .acpi_fill_ssdt = sd_fill_ssdt, #endif + .final = pci_dev_enable_bus_master, .ops_pci = &pci_dev_ops_pci, }; diff --git a/src/soc/intel/common/block/smbus/smbus.c b/src/soc/intel/common/block/smbus/smbus.c index ae9f650..70581dc 100644 --- a/src/soc/intel/common/block/smbus/smbus.c +++ b/src/soc/intel/common/block/smbus/smbus.c @@ -70,6 +70,7 @@ .enable_resources = pci_dev_enable_resources, .scan_bus = scan_smbus, .init = pch_smbus_init, + .final = pci_dev_enable_bus_master, .ops_pci = &pci_dev_ops_pci, .ops_smbus_bus = &lops_smbus_bus, }; diff --git a/src/soc/intel/common/block/spi/spi.c b/src/soc/intel/common/block/spi/spi.c index 295df09..d73c008 100644 --- a/src/soc/intel/common/block/spi/spi.c +++ b/src/soc/intel/common/block/spi/spi.c @@ -35,6 +35,7 @@ .enable_resources = pci_dev_enable_resources, .scan_bus = scan_generic_bus, .ops_spi_bus = &spi_bus_ops, + .final = pci_dev_enable_bus_master, .ops_pci = &pci_dev_ops_pci, }; diff --git a/src/soc/intel/common/block/sram/sram.c b/src/soc/intel/common/block/sram/sram.c index 426a5f7..002b164 100644 --- a/src/soc/intel/common/block/sram/sram.c +++ b/src/soc/intel/common/block/sram/sram.c @@ -29,6 +29,7 @@ .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = soc_sram_init, + .final = pci_dev_enable_bus_master, .ops_pci = &pci_dev_ops_pci, }; diff --git a/src/soc/intel/common/block/systemagent/systemagent.c b/src/soc/intel/common/block/systemagent/systemagent.c index 39ac53f..4eb7c9d 100644 --- a/src/soc/intel/common/block/systemagent/systemagent.c +++ b/src/soc/intel/common/block/systemagent/systemagent.c @@ -306,6 +306,7 @@ .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = sa_soc_systemagent_init, + .final = pci_dev_enable_bus_master, .ops_pci = &pci_dev_ops_pci, #if CONFIG(HAVE_ACPI_TABLES) .write_acpi_tables = sa_write_acpi_tables, diff --git a/src/soc/intel/common/block/uart/uart.c b/src/soc/intel/common/block/uart/uart.c index ed4f9c6..039dcd2 100644 --- a/src/soc/intel/common/block/uart/uart.c +++ b/src/soc/intel/common/block/uart/uart.c @@ -229,6 +229,7 @@ .read_resources = uart_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = uart_common_enable_resources, + .final = pci_dev_enable_bus_master, .ops_pci = &pci_dev_ops_pci, }; diff --git a/src/soc/intel/common/block/xdci/xdci.c b/src/soc/intel/common/block/xdci/xdci.c index 54cb076..4008177 100644 --- a/src/soc/intel/common/block/xdci/xdci.c +++ b/src/soc/intel/common/block/xdci/xdci.c @@ -18,6 +18,7 @@ .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = soc_xdci_init, + .final = pci_dev_enable_bus_master, .ops_pci = &pci_dev_ops_pci, }; diff --git a/src/soc/intel/common/block/xhci/xhci.c b/src/soc/intel/common/block/xhci/xhci.c index 47f2567..f8b9571 100644 --- a/src/soc/intel/common/block/xhci/xhci.c +++ b/src/soc/intel/common/block/xhci/xhci.c @@ -98,6 +98,7 @@ .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = soc_xhci_init, + .final = pci_dev_enable_bus_master, .ops_pci = &pci_dev_ops_pci, .scan_bus = scan_static_bus, #if CONFIG(HAVE_ACPI_TABLES) -- To view, visit https://review.coreboot.org/c/coreboot/+/44512 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ife65f6029d2f966e321f616e85f59f4c37c42145 Gerrit-Change-Number: 44512 Gerrit-PatchSet: 1 Gerrit-Owner: Subrata Banik <subrata.banik(a)intel.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newchange

7 24

Change in coreboot[master]: [DONOTSUBMIT]lib: Introduce memory bugs to help test ASan
by Harshit Sharma (Code Review) 10 Jun '23

10 Jun '23

Harshit Sharma has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/43938 ) Change subject: [DONOTSUBMIT]lib: Introduce memory bugs to help test ASan ...................................................................... [DONOTSUBMIT]lib: Introduce memory bugs to help test ASan Introduces a few memory bugs into cbfs code to make testing easier for the ones who are willing to try out ASan on their hardware. Change-Id: I0839f2fd2863934ec28e2322bab04b9cc33363b4 Signed-off-by: Harshit Sharma <harshitsharmajs(a)gmail.com> --- M src/lib/cbfs.c 1 file changed, 21 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/38/43938/1 diff --git a/src/lib/cbfs.c b/src/lib/cbfs.c index cb66f81..839de94 100644 --- a/src/lib/cbfs.c +++ b/src/lib/cbfs.c @@ -330,9 +330,30 @@ return 0; } +#if ENV_RAMSTAGE + int global_array[5] = {-1}; +#endif + int cbfs_boot_region_device(struct region_device *rdev) { + int stack_array[5], i, *p; boot_device_init(); + + /* global out-of-bounds */ +#if ENV_RAMSTAGE + for (i = 10; i > 0; i--) + global_array[i] = i; +#endif + /* stack out-of-bounds */ + for (i = 10; i > 0; i--) + stack_array[i] = i; + + /* use-after-scope */ + { + int x = 5; + p = &x; + } + *p = 10; return vboot_locate_cbfs(rdev) && fmap_locate_area_as_rdev("COREBOOT", rdev); } -- To view, visit https://review.coreboot.org/c/coreboot/+/43938 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I0839f2fd2863934ec28e2322bab04b9cc33363b4 Gerrit-Change-Number: 43938 Gerrit-PatchSet: 1 Gerrit-Owner: Harshit Sharma <harshitsharmajs(a)gmail.com> Gerrit-MessageType: newchange

4 21

Change in coreboot[master]: Fix control flow DEADCODE issue
by John Zhao (Code Review) 10 Jun '23

10 Jun '23

John Zhao has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/45623 ) Change subject: Fix control flow DEADCODE issue ...................................................................... Fix control flow DEADCODE issue Coverity detects DEADCODE issue in the control flow. Based on both of KEMPLD_CLK and KEMPLD_I2C_FREQ_STD definitions, execution cannot reach this statement "prescale = 0". This change removes the DEADCODE code. Found-by: Coverity CID 1431154 TEST=None Signed-off-by: John Zhao <john.zhao(a)intel.com> Change-Id: Ic002e708636961358969b2c1eaec0fee5bbcb73a --- M src/ec/kontron/kempld/kempld_i2c.c 1 file changed, 0 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/23/45623/1 diff --git a/src/ec/kontron/kempld/kempld_i2c.c b/src/ec/kontron/kempld/kempld_i2c.c index 296cf76..165c940 100644 --- a/src/ec/kontron/kempld/kempld_i2c.c +++ b/src/ec/kontron/kempld/kempld_i2c.c @@ -250,9 +250,6 @@ else prescale = KEMPLD_CLK / (KEMPLD_I2C_FREQ_STD * 4) - 3000; - if (prescale < 0) - prescale = 0; - /* Round to the best matching value */ prescale_corr = prescale / 1000; if (prescale % 1000 >= 500) -- To view, visit https://review.coreboot.org/c/coreboot/+/45623 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ic002e708636961358969b2c1eaec0fee5bbcb73a Gerrit-Change-Number: 45623 Gerrit-PatchSet: 1 Gerrit-Owner: John Zhao <john.zhao(a)intel.com> Gerrit-MessageType: newchange

5 23

Change in coreboot[master]: mainboard/hp/snb_ivb_laptops: Use GMA_STATIC_DISPLAYS macro
by Pablo Stebler (Code Review) 10 Jun '23

10 Jun '23

Pablo Stebler has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/45518 ) Change subject: mainboard/hp/snb_ivb_laptops: Use GMA_STATIC_DISPLAYS macro ...................................................................... mainboard/hp/snb_ivb_laptops: Use GMA_STATIC_DISPLAYS macro Signed-off-by: Pablo Stebler <pablo(a)stebler.xyz> Change-Id: Ibbe6de28afbc1176d6fb52d6101b8b46c4af7030 --- M src/mainboard/hp/snb_ivb_laptops/devicetree.cb 1 file changed, 1 insertion(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/18/45518/1 diff --git a/src/mainboard/hp/snb_ivb_laptops/devicetree.cb b/src/mainboard/hp/snb_ivb_laptops/devicetree.cb index acdd4b3..90be991 100644 --- a/src/mainboard/hp/snb_ivb_laptops/devicetree.cb +++ b/src/mainboard/hp/snb_ivb_laptops/devicetree.cb @@ -1,9 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-or-later chip northbridge/intel/sandybridge - register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410 }" - register "gfx.ndid" = "3" - register "gfx.use_spread_spectrum_clock" = "1" + register "gfx" = "GMA_STATIC_DISPLAYS(1)" register "gpu_cpu_backlight" = "0x00000129" register "gpu_dp_b_hotplug" = "4" register "gpu_dp_c_hotplug" = "4" -- To view, visit https://review.coreboot.org/c/coreboot/+/45518 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ibbe6de28afbc1176d6fb52d6101b8b46c4af7030 Gerrit-Change-Number: 45518 Gerrit-PatchSet: 1 Gerrit-Owner: Pablo Stebler <pablo(a)stebler.xyz> Gerrit-MessageType: newchange

2 1

Change in coreboot[master]: mb/volteer: Add Runtime D3 Support for SSD for Volteer
by Shreesh Chhabbi (Code Review) 10 Jun '23

10 Jun '23

Hello Shreesh Chhabbi, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/45301 to review the following change. Change subject: mb/volteer: Add Runtime D3 Support for SSD for Volteer ...................................................................... mb/volteer: Add Runtime D3 Support for SSD for Volteer Change-Id: I7629e42a14120718ef7b727b76bf80143c226660 Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi(a)intel.corp-partner.google.com> --- M src/mainboard/google/volteer/dsdt.asl M src/soc/intel/tigerlake/acpi/pcie.asl A src/soc/intel/tigerlake/acpi/pmc.asl 3 files changed, 1,393 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/01/45301/1 diff --git a/src/mainboard/google/volteer/dsdt.asl b/src/mainboard/google/volteer/dsdt.asl index d0bab1a..6c56334 100644 --- a/src/mainboard/google/volteer/dsdt.asl +++ b/src/mainboard/google/volteer/dsdt.asl @@ -15,6 +15,9 @@ { #include <soc/intel/tigerlake/acpi/platform.asl> + // PMC IPC implementation + #include <soc/intel/tigerlake/acpi/pmc.asl> + // global NVS and variables #include <soc/intel/common/block/acpi/acpi/globalnvs.asl> diff --git a/src/soc/intel/tigerlake/acpi/pcie.asl b/src/soc/intel/tigerlake/acpi/pcie.asl index a19feb7..70e6bff 100644 --- a/src/soc/intel/tigerlake/acpi/pcie.asl +++ b/src/soc/intel/tigerlake/acpi/pcie.asl @@ -1,6 +1,10 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* Intel PCH PCIe support */ +#define R_PCH_PCIE_CFG_SPR 0xE0 +#define R_PCH_PCIE_CFG_MPC 0xD8 +#define R_PCH_PCIE_CFG_RPPGEN 0xE2 +#define R_PCH_PCIE_CFG_PCIEPMECTL 0x420 Method (IRQM, 1, Serialized) { @@ -232,9 +236,208 @@ } } +OperationRegion (POST, SystemIO, 0x80, 1) +Field (POST, ByteAcc, Lock, Preserve) +{ + PST0, 8 +} + Device (RP09) { Name (_ADR, 0x001D0000) + OperationRegion(PXCS,SystemMemory,0xC00E8000,0xC80) + Field(PXCS,AnyAcc, NoLock, Preserve) + { + Offset(0), + VDID, 32, + Offset(0x50), // LCTL - Link Control Register + L0SE, 1, // 0, L0s Entry Enabled + Offset(0x52), // LSTS - Link Status Register + , 13, + LASX, 1, // 0, Link Active Status + Offset(0x5A), // SLSTS[7:0] - Slot Status Register + , 3, + PDCX, 1, // 3, Presence Detect Changed + , 2, + PDSX, 1, // 6, Presence Detect State + , 1, + Offset(0x60), // RSTS - Root Status Register + , 16, + PSPX, 1, // 16, PME Status + Offset(R_PCH_PCIE_CFG_MPC), // 0xD8, MPC - Miscellaneous Port Configuration Register + , 30, + HPEX, 1, // 30, Hot Plug SCI Enable + PMEX, 1, // 31, Power Management SCI Enable + Offset(R_PCH_PCIE_CFG_SPR), // 0xE0, SPR - Scratch Pad Register + , 7, + NCB7, 1, // Non-Sticky Scratch Pad Bit (NSCB)[7] + Offset(R_PCH_PCIE_CFG_RPPGEN), // 0xE2, RPPGEN - Root Port Power Gating Enable + , 2, + L23E, 1, // 2, L23_Rdy Entry Request (L23ER) + L23R, 1, // 3, L23_Rdy to Detect Transition (L23R2DT) + Offset(0xF4), // BLKPLLEN + , 10, + BPLL, 1, + Offset(0x338), // BLKDQDA + , 26, + BDQA, 1, + Offset(R_PCH_PCIE_CFG_PCIEPMECTL), // 0x420, PCIEPMECTL (PCIe PM Extension Control) + , 30, + DPGE, 1, // PCIEPMECTL[30]: Disabled, Detect and L23_Rdy State PHY Lane Power Gating Enable (DLSULPPGE): + } + + Method (CDLY, 1, Serialized) { + Store(0, Local0) + While(1) { + If(Lgreater(Local0, Arg0)) { + Break + } + Increment(Local0) + } + } + + /* L23D is called from _ON to get PCIe link back to Active State */ + Method (L23D, 0, Serialized) { + Store(0x21, PST0) + If(LNotEqual(NCB7,0x1)) { + Store(0x22, PST0) + Return() + } + //Store(0, DPGE) + Store(1, L23R) + Store(0, Local0) + /* Wait for transition to Detect */ + While(L23R) { + If(Lgreater(Local0, 20)) + { + Store(0x23, PST0) + Break + } + Sleep(16) + Increment(Local0) + } + Store(0,NCB7) + //Store(1, DPGE) + /* Once in Detect, wait up to 124 ms for Link Active (typically happens in under 70ms) */ + Store(0, Local0) + While(LEqual(LASX,0)) { + If(Lgreater(Local0, 20)) + { + Store(0x24, PST0) + Break + } + //CDLY(10000*60) + Increment(Local0) + } + } + + /* DL23 method is called from _OFF to put PCIe link into L2/L3 State */ + Method (DL23, 0, Serialized) { + Store(0x11, PST0) + Store(1, L23E) + Sleep(16) + Store(0, Local0) + While(L23E) { + Store(0x12, PST0) + If(Lgreater(Local0, 4)) { + Store(0x13, PST0) + Break + } + Sleep(16) + Increment(Local0) + } + Store (1, NCB7) + } + + PowerResource (PR09, 0x00, 0x0000) + { + Method (_ON, 0, Serialized) /* Power On */ + { + /* _ON entry: Post codes: 0x90 */ + Store(0x90, PST0) + + /* Set Power Pin High */ + // STXS(GPP_B16) // TGL-UP3 RVP + STXS(GPP_B2) // Volteer Variants + + /* 10ms delay */ + //Sleep(10) + + /* Unmask Source Clock 3 for TGL-UP3 RVP */ + /*ShiftLeft(0x1, 0x3, Local0) // 0x1 left shift by clock number (3) + ShiftLeft(0x1, 0x3, Local1) // Clock Enable/Disable 1/0 -> left shift by clock number + ShiftLeft(0x1, 8, Local2) // Local 0 -> 0x1 left shifted by Root Port Index Starting from 0 + ShiftLeft(0x1, 8, Local3) // Local 1 -> 0x1 (Unmask) left shifted by Root Port Index Starting from 0 + IPCS(0xAC, 0, 16, Local0, Local1, Local2, Local3)*/ + + /* Unmask Source Clock 0 for Volteer */ + ShiftLeft(0x1, 0x0, Local0) // 0x1 left shift by clock number (0) + ShiftLeft(0x1, 0x0, Local1) // Clock Enable/Disable 1/0 -> left shift by clock number + ShiftLeft(0x1, 8, Local2) // Local 0 -> 0x1 left shifted by Root Port Index Starting from 0 + ShiftLeft(0x1, 8, Local3) // Local 1 -> 0x1 (Unmask) left shifted by Root Port Index Starting from 0 + IPCS(0xAC, 0, 16, Local0, Local1, Local2, Local3) + + /* De-assert reset pin */ + // STXS(GPP_H0) // TGL-UP3 RVP + STXS(GPP_A11) // Volteer Variants + + /* 100ms delay */ + //CDLY(10000*50) + + /* Trigger L2/L3 ready exit flow in rootport - transition link to Detect */ + \_SB.PCI0.RP09.L23D() + } + Method (_OFF, 0, Serialized) /* Power Off */ + { + /* _OFF entry: Post Codes: 0x93 */ + Store(0x93, PST0) + + /* Trigger L2/L3 ready entry flow in rootport */ + \_SB.PCI0.RP09.DL23() + + /* Assert reset pin */ + // CTXS(GPP_H0) // TGL-UP3 RVP + CTXS(GPP_A11) // Volteer Variants + + /* Mask source clock 3 for TGL-UP3 RVP */ + /*ShiftLeft(0x1, 0x3, Local0) // 0x1 left shift by clock number (3) + ShiftLeft(0x0, 0x3, Local1) // Clock Enable/Disable 1/0 -> left shift by clock number + ShiftLeft(0x1, 8, Local2) // Local 0 -> 0x1 left shifted by Root Port Index Starting from 0 + ShiftLeft(0x0, 8, Local3) // Local 1 -> 0x0 (Mask) left shifted by Root Port Index Starting from 0 + IPCS(0xAC, 0, 16, Local0, Local1, Local2, Local3)*/ + + /* Mask source clock 0 for Volteer */ + ShiftLeft(0x1, 0x0, Local0) // 0x1 left shift by clock number (0) + ShiftLeft(0x0, 0x0, Local1) // Clock Enable/Disable 1/0 -> left shift by clock number + ShiftLeft(0x1, 8, Local2) // Local 0 -> 0x1 left shifted by Root Port Index Starting from 0 + ShiftLeft(0x0, 8, Local3) // Local 1 -> 0x0 (Mask) left shifted by Root Port Index Starting from 0 + IPCS(0xAC, 0, 16, Local0, Local1, Local2, Local3) + + /* Power off the power pin */ + // CTXS(GPP_B16) // TGL-UP3 RVP + CTXS(GPP_B2) // Volteer Variants + } + Method (_STA, 0, NotSerialized) /* _STA: Status */ + { + Store(0x88, PST0) + If(GTXS(GPP_A11)) { + Store(0x1, PST0) + Return (1) + } Else { + Store(0x0, PST0) + Return (0) + } + } + } + + Name (_PR0, Package (0x01) /* _PR0: Power Resources for D0 */ + { + PR09 + }) + Name (_PR3, Package (0x01) /* _PR3: Power Resources for D3hot */ + { + PR09 + }) OperationRegion (RPCS, PCI_Config, 0x4c, 4) Field (RPCS, AnyAcc, NoLock, Preserve) @@ -247,6 +450,23 @@ { Return (IRQM (RPPN)) } + + Device (PXSX) + { + Name (_ADR, 0x00000000) + Name (_S0W, 4) + Method (_DSD, 0) { + Return ( + Package () { + ToUUID("5025030F-842F-4AB4-A561-99A5189762D0"), + // Enable D3 Support for NVMe Storage + Package () { + Package (2) {"StorageD3Enable",1} // 1 - Enable; 0 - Disable + } + } + ) + } + } } Device (RP10) diff --git a/src/soc/intel/tigerlake/acpi/pmc.asl b/src/soc/intel/tigerlake/acpi/pmc.asl new file mode 100644 index 0000000..f74e3f2 --- /dev/null +++ b/src/soc/intel/tigerlake/acpi/pmc.asl @@ -0,0 +1,1170 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <soc/iomap.h> + +#define PCH_MAX_PCIE_ROOT_PORTS 24 +#define R_PMC_PWRM_IPC_CMD 0x00 ///< IPC command +#define N_PMC_PWRM_IPC_CMD_CMD_ID 12 ///< IPC command.cmd.ID +#define N_PMC_PWRM_IPC_CMD_SIZE 16 ///< IPC command.size + +#define V_TGL_PCH_LP_PMC_DID 0xA0A1 +#define R_PMC_PWRM_TIMED_GPIO_CONTROL_0 0x1210 +#define R_PMC_PWRM_TIMED_GPIO_CONTROL_1 0x1310 +#define R_PMC_CFG_BASE 0x10 +#define B_PMC_CFG_PWRM_BASE_MASK 0xFFFF0000 ///< PWRM must be 64KB alignment to align the source decode. + +// +// ACPI and legacy I/O register offsets from ACPIBASE +// +#define R_ACPI_IO_PM1_STS 0x00 +#define S_ACPI_IO_PM1_STS 2 +#define B_ACPI_IO_PM1_STS_WAK BIT15 +#define B_ACPI_IO_PM1_STS_PCIEXP_WAKE_STS BIT14 +#define B_ACPI_IO_PM1_STS_PRBTNOR BIT11 +#define B_ACPI_IO_PM1_STS_RTC BIT10 +#define B_ACPI_IO_PM1_STS_PWRBTN BIT8 +#define B_ACPI_IO_PM1_STS_GBL BIT5 +#define B_ACPI_IO_PM1_STS_BM BIT4 +#define B_ACPI_IO_PM1_STS_TMROF BIT0 +#define N_ACPI_IO_PM1_STS_WAK 15 +#define N_ACPI_IO_PM1_STS_PCIEXP_WAKE_STS 14 +#define N_ACPI_IO_PM1_STS_PRBTNOR 11 +#define N_ACPI_IO_PM1_STS_RTC 10 +#define N_ACPI_IO_PM1_STS_PWRBTN 8 +#define N_ACPI_IO_PM1_STS_GBL 5 +#define N_ACPI_IO_PM1_STS_BM 4 +#define N_ACPI_IO_PM1_STS_TMROF 0 + +#define R_ACPI_IO_PM1_EN 0x02 +#define S_ACPI_IO_PM1_EN 2 +#define B_ACPI_IO_PM1_EN_RTC BIT10 +#define B_ACPI_IO_PM1_EN_PWRBTN BIT8 +#define B_ACPI_IO_PM1_EN_GBL BIT5 +#define B_ACPI_IO_PM1_EN_TMROF BIT0 +#define N_ACPI_IO_PM1_EN_RTC 10 +#define N_ACPI_IO_PM1_EN_PWRBTN 8 +#define N_ACPI_IO_PM1_EN_GBL 5 +#define N_ACPI_IO_PM1_EN_TMROF 0 + +#define R_ACPI_IO_PM1_CNT 0x04 +#define S_ACPI_IO_PM1_CNT 4 +#define B_ACPI_IO_PM1_CNT_SLP_EN BIT13 +#define B_ACPI_IO_PM1_CNT_SLP_TYP (BIT12 | BIT11 | BIT10) +#define V_ACPI_IO_PM1_CNT_S0 0 +#define V_ACPI_IO_PM1_CNT_S1 BIT10 +#define V_ACPI_IO_PM1_CNT_S3 (BIT12 | BIT10) +#define V_ACPI_IO_PM1_CNT_S4 (BIT12 | BIT11) +#define V_ACPI_IO_PM1_CNT_S5 (BIT12 | BIT11 | BIT10) +#define B_ACPI_IO_PM1_CNT_GBL_RLS BIT2 +#define B_ACPI_IO_PM1_CNT_BM_RLD BIT1 +#define B_ACPI_IO_PM1_CNT_SCI_EN BIT0 + +#define R_ACPI_IO_PM1_TMR 0x08 +#define V_ACPI_IO_PM1_TMR_FREQUENCY 3579545 +#define B_ACPI_IO_PM1_TMR_VAL 0xFFFFFF +#define V_ACPI_IO_PM1_TMR_MAX_VAL 0x1000000 ///< The timer is 24 bit overflow + +#define R_ACPI_IO_SMI_EN 0x30 +#define S_ACPI_IO_SMI_EN 4 +#define B_ACPI_IO_SMI_EN_LEGACY_USB3 BIT31 +#define B_ACPI_IO_SMI_EN_GPIO_UNLOCK_SMI BIT27 +#define B_ACPI_IO_SMI_EN_LEGACY_USB2 BIT17 +#define B_ACPI_IO_SMI_EN_PERIODIC BIT14 +#define B_ACPI_IO_SMI_EN_TCO BIT13 +#define B_ACPI_IO_SMI_EN_MCSMI BIT11 +#define B_ACPI_IO_SMI_EN_BIOS_RLS BIT7 +#define B_ACPI_IO_SMI_EN_SWSMI_TMR BIT6 +#define B_ACPI_IO_SMI_EN_APMC BIT5 +#define B_ACPI_IO_SMI_EN_ON_SLP_EN BIT4 +#define B_ACPI_IO_SMI_EN_LEGACY_USB BIT3 +#define B_ACPI_IO_SMI_EN_BIOS BIT2 +#define B_ACPI_IO_SMI_EN_EOS BIT1 +#define B_ACPI_IO_SMI_EN_GBL_SMI BIT0 +#define N_ACPI_IO_SMI_EN_LEGACY_USB3 31 +#define N_ACPI_IO_SMI_EN_ESPI 28 +#define N_ACPI_IO_SMI_EN_GPIO_UNLOCK 27 +#define N_ACPI_IO_SMI_EN_INTEL_USB2 18 +#define N_ACPI_IO_SMI_EN_LEGACY_USB2 17 +#define N_ACPI_IO_SMI_EN_PERIODIC 14 +#define N_ACPI_IO_SMI_EN_TCO 13 +#define N_ACPI_IO_SMI_EN_MCSMI 11 +#define N_ACPI_IO_SMI_EN_BIOS_RLS 7 +#define N_ACPI_IO_SMI_EN_SWSMI_TMR 6 +#define N_ACPI_IO_SMI_EN_APMC 5 +#define N_ACPI_IO_SMI_EN_ON_SLP_EN 4 +#define N_ACPI_IO_SMI_EN_LEGACY_USB 3 +#define N_ACPI_IO_SMI_EN_BIOS 2 +#define N_ACPI_IO_SMI_EN_EOS 1 +#define N_ACPI_IO_SMI_EN_GBL_SMI 0 + +#define R_ACPI_IO_SMI_STS 0x34 +#define S_ACPI_IO_SMI_STS 4 +#define B_ACPI_IO_SMI_STS_LEGACY_USB3 BIT31 +#define B_ACPI_IO_SMI_STS_GPIO_UNLOCK BIT27 +#define B_ACPI_IO_SMI_STS_SPI BIT26 +#define B_ACPI_IO_SMI_STS_MONITOR BIT21 +#define B_ACPI_IO_SMI_STS_PCI_EXP BIT20 +#define B_ACPI_IO_SMI_STS_PATCH BIT19 +#define B_ACPI_IO_SMI_STS_INTEL_USB2 BIT18 +#define B_ACPI_IO_SMI_STS_LEGACY_USB2 BIT17 +#define B_ACPI_IO_SMI_STS_SMBUS BIT16 +#define B_ACPI_IO_SMI_STS_SERIRQ BIT15 +#define B_ACPI_IO_SMI_STS_PERIODIC BIT14 +#define B_ACPI_IO_SMI_STS_TCO BIT13 +#define B_ACPI_IO_SMI_STS_DEVMON BIT12 +#define B_ACPI_IO_SMI_STS_MCSMI BIT11 +#define B_ACPI_IO_SMI_STS_GPIO_SMI BIT10 +#define B_ACPI_IO_SMI_STS_GPE0 BIT9 +#define B_ACPI_IO_SMI_STS_PM1_STS_REG BIT8 +#define B_ACPI_IO_SMI_STS_SWSMI_TMR BIT6 +#define B_ACPI_IO_SMI_STS_APM BIT5 +#define B_ACPI_IO_SMI_STS_ON_SLP_EN BIT4 +#define B_ACPI_IO_SMI_STS_LEGACY_USB BIT3 +#define B_ACPI_IO_SMI_STS_BIOS BIT2 +#define N_ACPI_IO_SMI_STS_LEGACY_USB3 31 +#define N_ACPI_IO_SMI_STS_ESPI 28 +#define N_ACPI_IO_SMI_STS_GPIO_UNLOCK 27 +#define N_ACPI_IO_SMI_STS_SPI 26 +#define N_ACPI_IO_SMI_STS_MONITOR 21 +#define N_ACPI_IO_SMI_STS_PCI_EXP 20 +#define N_ACPI_IO_SMI_STS_PATCH 19 +#define N_ACPI_IO_SMI_STS_INTEL_USB2 18 +#define N_ACPI_IO_SMI_STS_LEGACY_USB2 17 +#define N_ACPI_IO_SMI_STS_SMBUS 16 +#define N_ACPI_IO_SMI_STS_SERIRQ 15 +#define N_ACPI_IO_SMI_STS_PERIODIC 14 +#define N_ACPI_IO_SMI_STS_TCO 13 +#define N_ACPI_IO_SMI_STS_DEVMON 12 +#define N_ACPI_IO_SMI_STS_MCSMI 11 +#define N_ACPI_IO_SMI_STS_GPIO_SMI 10 +#define N_ACPI_IO_SMI_STS_GPE0 9 +#define N_ACPI_IO_SMI_STS_PM1_STS_REG 8 +#define N_ACPI_IO_SMI_STS_SWSMI_TMR 6 +#define N_ACPI_IO_SMI_STS_APM 5 +#define N_ACPI_IO_SMI_STS_ON_SLP_EN 4 +#define N_ACPI_IO_SMI_STS_LEGACY_USB 3 +#define N_ACPI_IO_SMI_STS_BIOS 2 + +#define R_ACPI_IO_GPE_CNTL 0x40 +#define B_ACPI_IO_GPE_CNTL_SWGPE_CTRL BIT17 + +#define R_ACPI_IO_DEVACT_STS 0x44 +#define S_ACPI_IO_DEVACT_STS 2 +#define B_ACPI_IO_DEVACT_STS_MASK 0x13E1 +#define B_ACPI_IO_DEVACT_STS_KBC BIT12 +#define B_ACPI_IO_DEVACT_STS_PIRQDH BIT9 +#define B_ACPI_IO_DEVACT_STS_PIRQCG BIT8 +#define B_ACPI_IO_DEVACT_STS_PIRQBF BIT7 +#define B_ACPI_IO_DEVACT_STS_PIRQAE BIT6 +#define B_ACPI_IO_DEVACT_STS_D0_TRP BIT0 +#define N_ACPI_IO_DEVACT_STS_KBC 12 +#define N_ACPI_IO_DEVACT_STS_PIRQDH 9 +#define N_ACPI_IO_DEVACT_STS_PIRQCG 8 +#define N_ACPI_IO_DEVACT_STS_PIRQBF 7 +#define N_ACPI_IO_DEVACT_STS_PIRQAE 6 + +#define R_ACPI_IO_PM2_CNT 0x50 +#define B_ACPI_IO_PM2_CNT_ARB_DIS BIT0 + +#define R_ACPI_IO_OC_WDT_CTL 0x54 +#define B_ACPI_IO_OC_WDT_CTL_RLD BIT31 +#define B_ACPI_IO_OC_WDT_CTL_ICCSURV_STS BIT25 +#define B_ACPI_IO_OC_WDT_CTL_NO_ICCSURV_STS BIT24 +#define B_ACPI_IO_OC_WDT_CTL_FORCE_ALL BIT15 +#define B_ACPI_IO_OC_WDT_CTL_EN BIT14 +#define B_ACPI_IO_OC_WDT_CTL_ICCSURV BIT13 +#define B_ACPI_IO_OC_WDT_CTL_LCK BIT12 +#define B_ACPI_IO_OC_WDT_CTL_TOV_MASK 0x3FF +#define B_ACPI_IO_OC_WDT_CTL_FAILURE_STS BIT23 +#define B_ACPI_IO_OC_WDT_CTL_UNXP_RESET_STS BIT22 +#define B_ACPI_IO_OC_WDT_CTL_AFTER_POST 0x3F0000 +#define V_ACPI_IO_OC_WDT_CTL_STATUS_FAILURE 1 +#define V_ACPI_IO_OC_WDT_CTL_STATUS_OK 0 + +#define R_ACPI_IO_GPE0_STS_31_0 0x60 +#define R_ACPI_IO_GPE0_STS_63_32 0x64 +#define R_ACPI_IO_GPE0_STS_95_64 0x68 +#define R_ACPI_IO_GPE0_STS_127_96 0x6C +#define S_ACPI_IO_GPE0_STS_127_96 4 +#define B_ACPI_IO_GPE0_STS_127_96_CPU_WAKE_EN BIT19 +#define B_ACPI_IO_GPE0_STS_127_96_WADT BIT18 +#define B_ACPI_IO_GPE0_STS_127_96_USB_CON_DSX_STS BIT17 +#define B_ACPI_IO_GPE0_STS_127_96_LAN_WAKE BIT16 +#define B_ACPI_IO_GPE0_STS_127_96_GPIO_TIER_2 BIT15 +#define B_ACPI_IO_GPE0_STS_127_96_PME_B0 BIT13 +#define B_ACPI_IO_GPE0_STS_127_96_ME_SCI BIT12 +#define B_ACPI_IO_GPE0_STS_127_96_PME BIT11 +#define B_ACPI_IO_GPE0_STS_127_96_BATLOW BIT10 +#define B_ACPI_IO_GPE0_STS_127_96_PCI_EXP BIT9 +#define B_ACPI_IO_GPE0_STS_127_96_RI BIT8 +#define B_ACPI_IO_GPE0_STS_127_96_SMB_WAK BIT7 +#define B_ACPI_IO_GPE0_STS_127_96_TC0SCI BIT6 +#define B_ACPI_IO_GPE0_STS_127_96_SWGPE BIT2 +#define B_ACPI_IO_GPE0_STS_127_96_HOT_PLUG BIT1 +#define N_ACPI_IO_GPE0_STS_127_96_GPIO_TIER_2 15 +#define N_ACPI_IO_GPE0_STS_127_96_PME_B0 13 +#define N_ACPI_IO_GPE0_STS_127_96_PME 11 +#define N_ACPI_IO_GPE0_STS_127_96_BATLOW 10 +#define N_ACPI_IO_GPE0_STS_127_96_PCI_EXP 9 +#define N_ACPI_IO_GPE0_STS_127_96_RI 8 +#define N_ACPI_IO_GPE0_STS_127_96_SMB_WAK 7 +#define N_ACPI_IO_GPE0_STS_127_96_TC0SCI 6 +#define N_ACPI_IO_GPE0_STS_127_96_SWGPE 2 +#define N_ACPI_IO_GPE0_STS_127_96_HOT_PLUG 1 + +#define R_ACPI_IO_GPE0_EN_31_0 0x70 +#define R_ACPI_IO_GPE0_EN_63_32 0x74 +#define R_ACPI_IO_GPE0_EN_95_64 0x78 +#define R_ACPI_IO_GPE0_EN_127_96 0x7C +#define S_ACPI_IO_GPE0_EN_127_96 4 +#define B_ACPI_IO_GPE0_EN_127_96_CPU_WAKE_EN BIT19 +#define B_ACPI_IO_GPE0_EN_127_96_WADT BIT18 +#define B_ACPI_IO_GPE0_EN_127_96_USB_CON_DSX_EN BIT17 +#define B_ACPI_IO_GPE0_EN_127_96_LAN_WAKE BIT16 +#define B_ACPI_IO_GPE0_EN_127_96_PME_B0 BIT13 +#define B_ACPI_IO_GPE0_EN_127_96_ME_SCI BIT12 +#define B_ACPI_IO_GPE0_EN_127_96_PME BIT11 +#define B_ACPI_IO_GPE0_EN_127_96_BATLOW BIT10 +#define B_ACPI_IO_GPE0_EN_127_96_PCI_EXP BIT9 +#define B_ACPI_IO_GPE0_EN_127_96_RI BIT8 +#define B_ACPI_IO_GPE0_EN_127_96_TC0SCI BIT6 +#define B_ACPI_IO_GPE0_EN_127_96_SWGPE BIT2 +#define B_ACPI_IO_GPE0_EN_127_96_HOT_PLUG BIT1 +#define N_ACPI_IO_GPE0_EN_127_96_PME_B0 13 +#define N_ACPI_IO_GPE0_EN_127_96_USB3 12 +#define N_ACPI_IO_GPE0_EN_127_96_PME 11 +#define N_ACPI_IO_GPE0_EN_127_96_BATLOW 10 +#define N_ACPI_IO_GPE0_EN_127_96_PCI_EXP 9 +#define N_ACPI_IO_GPE0_EN_127_96_RI 8 +#define N_ACPI_IO_GPE0_EN_127_96_TC0SCI 6 +#define N_ACPI_IO_GPE0_EN_127_96_SWGPE 2 +#define N_ACPI_IO_GPE0_EN_127_96_HOT_PLUG 1 + + +// +// TCO register I/O map +// +#define R_TCO_IO_RLD 0x0 +#define R_TCO_IO_DAT_IN 0x2 +#define R_TCO_IO_DAT_OUT 0x3 +#define R_TCO_IO_TCO1_STS 0x04 +#define S_TCO_IO_TCO1_STS 2 +#define B_TCO_IO_TCO1_STS_DMISERR BIT12 +#define B_TCO_IO_TCO1_STS_DMISMI BIT10 +#define B_TCO_IO_TCO1_STS_DMISCI BIT9 +#define B_TCO_IO_TCO1_STS_BIOSWR BIT8 +#define B_TCO_IO_TCO1_STS_NEWCENTURY BIT7 +#define B_TCO_IO_TCO1_STS_TIMEOUT BIT3 +#define B_TCO_IO_TCO1_STS_TCO_INT BIT2 +#define B_TCO_IO_TCO1_STS_SW_TCO_SMI BIT1 +#define B_TCO_IO_TCO1_STS_NMI2SMI BIT0 +#define N_TCO_IO_TCO1_STS_DMISMI 10 +#define N_TCO_IO_TCO1_STS_BIOSWR 8 +#define N_TCO_IO_TCO1_STS_NEWCENTURY 7 +#define N_TCO_IO_TCO1_STS_TIMEOUT 3 +#define N_TCO_IO_TCO1_STS_SW_TCO_SMI 1 +#define N_TCO_IO_TCO1_STS_NMI2SMI 0 + +#define R_TCO_IO_TCO2_STS 0x06 +#define S_TCO_IO_TCO2_STS 2 +#define B_TCO_IO_TCO2_STS_SMLINK_SLV_SMI BIT4 +#define B_TCO_IO_TCO2_STS_BAD_BIOS BIT3 +#define B_TCO_IO_TCO2_STS_BOOT BIT2 +#define B_TCO_IO_TCO2_STS_SECOND_TO BIT1 +#define B_TCO_IO_TCO2_STS_INTRD_DET BIT0 +#define N_TCO_IO_TCO2_STS_INTRD_DET 0 + +#define R_TCO_IO_TCO1_CNT 0x08 +#define S_TCO_IO_TCO1_CNT 2 +#define B_TCO_IO_TCO1_CNT_LOCK BIT12 +#define B_TCO_IO_TCO1_CNT_TMR_HLT BIT11 +#define B_TCO_IO_TCO1_CNT_NMI2SMI_EN BIT9 +#define B_TCO_IO_TCO1_CNT_NMI_NOW BIT8 +#define N_TCO_IO_TCO1_CNT_NMI2SMI_EN 9 +#define B_TCO_IO_TCO1_CNT_NR_MSUS BIT0 //NO_REBOOT + +#define R_TCO_IO_TCO2_CNT 0x0A +#define S_TCO_IO_TCO2_CNT 2 +#define B_TCO_IO_TCO2_CNT_OS_POLICY 0x0030 +#define B_TCO_IO_TCO2_CNT_GPI11_ALERT_DISABLE 0x0008 +#define B_TCO_IO_TCO2_CNT_INTRD_SEL 0x0006 +#define N_TCO_IO_TCO2_CNT_INTRD_SEL 2 + +#define R_TCO_IO_MESSAGE1 0x0C +#define R_TCO_IO_MESSAGE2 0x0D +#define R_TCO_IO_TWDS 0x0E ///< TCO_WDSTATUS register. +#define R_TCO_IO_LE 0x10 ///< LEGACY_ELIM register +#define B_TCO_IO_LE_IRQ12_CAUSE BIT1 +#define B_TCO_IO_LE_IRQ1_CAUSE BIT0 +#define R_TCO_IO_TMR 0x12 + +// +// PWRM Registers for IPC interface +// +#define R_PMC_PWRM_IPC_CMD 0x00 ///< IPC command +#define N_PMC_PWRM_IPC_CMD_CMD_ID 12 ///< IPC command.cmd.ID +#define N_PMC_PWRM_IPC_CMD_SIZE 16 ///< IPC command.size +#define B_PMC_PWRM_IPC_CMD_SIZE_MASK 0x00FF0000 ///< IPC command.size mask Bits[23:16] +#define B_PMC_PWRM_IPC_CMD_MSI BIT8 ///< IPC command MSI bit +#define N_PMC_PWRM_IPC_CMD_COMMAND 0 ///< IPC command.cmd.Command +#define B_PMC_PWRM_IPC_CMD_COMMAND_MASK 0x000000FF ///< IPC command.size mask Bits[07:00] +#define V_PMC_PWRM_IPC_CMD_COMMAND_GEN_COMM 0xA0 ///< IPC command for General PMC Communication +#define V_PMC_PWRM_IPC_SUBCMD_GEN_COMM_READ 2 ///< IPC subcommand to Read PMC address space using WBUF0 +#define V_PMC_PWRM_IPC_CMD_COMMAND_SLP_CTRL 0xA1 ///< IPC command to control S0ix policies +#define V_PMC_PWRM_IPC_CMD_COMMAND_SNDW_RCOMP 0xA2 ///< IPC command to control platform Soundwire buffer RCOMP +#define V_PMC_PWRM_IPC_CMD_COMMAND_FIVR 0xA3 ///< IPC command to control FIVR Configuration +#define V_PMC_PWRM_IPC_SUBCMD_RFI_CTRL0_LOGIC 0 ///< IPC subcommand to control RFI Control 0 register logic write +#define V_PMC_PWRM_IPC_SUBCMD_RFI_CTRL4_LOGIC 1 ///< IPC subcommand to control RFI Control 4 register logic write +#define V_PMC_PWRM_IPC_SUBCMD_EMI_CTRL0_LOGIC 2 ///< IPC subcommand to control EMI Control 0 register logic write +#define V_PMC_PWRM_IPC_SUBCMD_FFFC_FAULT_STATUS 3 ///< IPC subcommand to control FFFC_FAULT_STATUS register logic read +#define V_PMC_PWRM_IPC_SUBCMD_FFFC_RFI_STATUS 4 ///< IPC subcommand to control FFFC_RFI_STATUS register logic read +#define V_PMC_PWRM_IPC_CMD_CMD_ID_FIVR_READ 0x00 ///< IPC subcommand to read FIVR Register +#define V_PMC_PWRM_IPC_CMD_CMD_ID_FIVR_WRITE 0x01 ///< IPC subcommand to write FIVR Register and fuse SRAM/DCCM +#define V_PMC_PWRM_IPC_CMD_COMMAND_NPK_STATE 0xA4 ///< IPC command to control NPK Power State +#define V_PMC_PWRM_IPC_CMD_COMMAND_CRASHLOG 0xA6 ///< CrashLog Command +#define V_PMC_PWRM_IPC_CMD_COMMAND_ME_DISABLE 0xA9 ///< IPC command to disable ME devices +#define V_PMC_PWRM_IPC_CMD_COMMAND_PMC_PRV_REG_ACCESS 0xAB ///< IPC command from proxy access to PMC private registers +#define V_PMC_PRIVATE_REGISTER_ID_GBLRST_TRIG_MASK0 0x0 +#define V_PMC_PRIVATE_REGISTER_ID_GBLRST_EVENT_MASK0 0x1 +#define V_PMC_PRIVATE_REGISTER_ID_MAX 0x2 +#define V_PMC_PWRM_IPC_CMD_COMMAND_SSC_STATE 0xAE ///< IPC command to control SA SSC enable/disable +#define V_PMC_PWRM_IPC_CMD_CMD_ID_CRASHLOG_DISCOVERY 0x01 ///< CrashLog Discovery SubCommand +#define V_PMC_PWRM_IPC_CMD_CMD_ID_CRASHLOG_DISABLE 0x02 ///< Disable CrashLog SubCommand +#define V_PMC_PWRM_IPC_CMD_CMD_ID_CRASHLOG_UPDATE 0x03 ///< Manual Trigger CrashLog SubCommand +#define V_PMC_PWRM_IPC_CMD_CMD_ID_CRASHLOG_ERASE 0x04 ///< Clear CrashLog record SubCommand +#define V_PMC_PWRM_IPC_CMD_CMD_ID_CRASHLOG_ON_RESET 0x05 ///< Collect on all resets SubCommand +#define V_PMC_PWRM_IPC_CMD_CMD_ID_CRASHLOG_RE_ARM 0x06 ///< Re-arm SubCommand to ensure that a trigger command only executed on time per boot +#define V_PMC_PWRM_IPC_SRC_CLK_CMD 0xA8 ///< IPC to PMC SRCCLK command +#define V_PMC_PWRM_IPC_CMD_COMMAND_PROXY 0xAA ///< Proxy access to SOC registers +#define V_PMC_PWRM_IPC_SRC_CLK_PORT_MAPPING_CMD 0xAC ///< IPC to PMC SRCCLK and port mapping command +#define V_PMC_PWRM_IPC_GCR_REG_LOCK_CMD 0xAD ///< IPC command to lock PMC GCR registers +#define V_PMC_PWRM_IPC_CMD_CMD_ID_PROXY_READ 0 ///< Read command +#define V_PMC_PWRM_IPC_CMD_CMD_ID_PROXY_WRITE 1 ///< Write command +#define V_PMC_PWRM_IPC_CMD_WBUF0_PROXY_NMI 2 ///< parameter to access NMI control register +#define R_PMC_PWRM_IPC_STS 0x04 ///< IPC Status +#define B_PMC_PWRM_IPC_STS_BUSY BIT0 ///< IPC Status Busy Bit +#define B_PMC_PWRM_IPC_STS_ERROR BIT1 ///< IPC Status Error Bit +#define N_PMC_PWRM_IPC_STS_ERR_CODE BIT16 ///< IPC Status Error status +#define B_PMC_PWRM_IPC_STS_ERR_CODE_MASK 0x00FF0000 ///< IPC Status Error status mask[23:16] +#define R_PMC_PWRM_IPC_SPTR 0x08 ///< IPC Source Pointer +#define R_PMC_PWRM_IPC_DPTR 0x0C ///< IPC Destination Pointer +#define R_PMC_PWRM_IPC_WBUF0 0x80 ///< IPC Write Buffer +#define R_PMC_PWRM_IPC_WBUF1 0x84 ///< IPC Write Buffer +#define R_PMC_PWRM_IPC_WBUF2 0x88 ///< IPC Write Buffer +#define R_PMC_PWRM_IPC_WBUF3 0x8C ///< IPC Write Buffer +#define R_PMC_PWRM_IPC_RBUF0 0x90 ///< IPC Read Buffer +#define R_PMC_PWRM_IPC_RBUF1 0x94 ///< IPC Read Buffer +#define R_PMC_PWRM_IPC_RBUF2 0x98 ///< IPC Read Buffer +#define R_PMC_PWRM_IPC_RBUF3 0x9C ///< IPC Read Buffer + + +// +// PWRM Registers +// +#define R_PMC_PWRM_GEN_PMCON_A 0x1020 ///< in CNL located in PWRM +#define B_PMC_PWRM_GEN_PMCON_A_DC_PP_DIS BIT30 +#define B_PMC_PWRM_GEN_PMCON_A_DSX_PP_DIS BIT29 +#define B_PMC_PWRM_GEN_PMCON_A_AG3_PP_EN BIT28 +#define B_PMC_PWRM_GEN_PMCON_A_SX_PP_EN BIT27 +#define B_PMC_PWRM_GEN_PMCON_A_ALLOW_ICLK_PLL BIT26 +#define B_PMC_PWRM_GEN_PMCON_A_MPHY_CRICLK_GATE_OVR BIT25 +#define B_PMC_PWRM_GEN_PMCON_A_GBL_RST_STS BIT24 +#define B_PMC_PWRM_GEN_PMCON_A_DISB BIT23 +#define B_PMC_PWRM_GEN_PMCON_A_ALLOW_OPI_PLL_SD_INC0 BIT22 +#define B_PMC_PWRM_GEN_PMCON_A_MEM_SR BIT21 +#define B_PMC_PWRM_GEN_PMCON_A_ALLOW_SPXB_CG_INC0 BIT20 +#define B_PMC_PWRM_GEN_PMCON_A_ALLOW_L1LOW_C0 BIT19 +#define B_PMC_PWRM_GEN_PMCON_A_MS4V BIT18 +#define B_PMC_PWRM_GEN_PMCON_A_ALLOW_L1LOW_OPI_ON BIT17 +#define B_PMC_PWRM_GEN_PMCON_A_SUS_PWR_FLR BIT16 +#define B_PMC_PWRM_GEN_PMCON_A_PME_B0_S5_DIS BIT15 +#define B_PMC_PWRM_GEN_PMCON_A_PWR_FLR BIT14 +#define B_PMC_PWRM_GEN_PMCON_A_ALLOW_L1LOW_BCLKREQ_ON BIT13 +#define B_PMC_PWRM_GEN_PMCON_A_DISABLE_SX_STRETCH BIT12 +#define B_PMC_PWRM_GEN_PMCON_A_HOST_RST_STS BIT9 +#define B_PMC_PWRM_GEN_PMCON_A_ESPI_SMI_LOCK BIT8 +#define B_PMC_PWRM_GEN_PMCON_A_SLP_S4_ASE BIT3 +#define B_PMC_PWRM_GEN_PMCON_A_AFTERG3_EN BIT0 +#define B_PMC_PWRM_GEN_PMCON_A_SLP_S3_MAW 0xC00 +#define V_PMC_PWRM_GEN_PMCON_A_SLP_S3_MAW_60US 0x000 +#define V_PMC_PWRM_GEN_PMCON_A_SLP_S3_MAW_1MS 0x400 +#define V_PMC_PWRM_GEN_PMCON_A_SLP_S3_MAW_50MS 0x800 +#define V_PMC_PWRM_GEN_PMCON_A_SLP_S3_MAW_2S 0xC00 +#define B_PMC_PWRM_GEN_PMCON_A_SWSMI_RTSL 0xC0 +#define V_PMC_PWRM_GEN_PMCON_A_SWSMI_RTSL_64MS 0xC0 +#define V_PMC_PWRM_GEN_PMCON_A_SWSMI_RTSL_32MS 0x80 +#define V_PMC_PWRM_GEN_PMCON_A_SWSMI_RTSL_16MS 0x40 +#define V_PMC_PWRM_GEN_PMCON_A_SWSMI_RTSL_1_5MS 0x00 +#define B_PMC_PWRM_GEN_PMCON_A_SLP_S4_MAW 0x30 +#define V_PMC_PWRM_GEN_PMCON_A_SLP_S4_MAW_1S 0x30 +#define V_PMC_PWRM_GEN_PMCON_A_SLP_S4_MAW_2S 0x20 +#define V_PMC_PWRM_GEN_PMCON_A_SLP_S4_MAW_3S 0x10 +#define V_PMC_PWRM_GEN_PMCON_A_SLP_S4_MAW_4S 0x00 +#define B_PMC_PWRM_GEN_PMCON_A_PER_SMI_SEL 0x6 +#define V_PMC_PWRM_GEN_PMCON_A_PER_SMI_64S 0x0000 +#define V_PMC_PWRM_GEN_PMCON_A_PER_SMI_32S 0x0002 +#define V_PMC_PWRM_GEN_PMCON_A_PER_SMI_16S 0x0004 +#define V_PMC_PWRM_GEN_PMCON_A_PER_SMI_8S 0x0006 + +#define R_PMC_PWRM_GEN_PMCON_B 0x1024 +#define B_PMC_PWRM_GEN_PMCON_B_SLPSX_STR_POL_LOCK BIT18 ///< Lock down SLP_S3/SLP_S4 Minimum Assertion width +#define B_PMC_PWRM_GEN_PMCON_B_FIVR_LOCK BIT17 +#define B_PMC_PWRM_GEN_PMCON_B_WOL_EN_OVRD BIT13 +#define B_PMC_PWRM_GEN_PMCON_B_BIOS_PCI_EXP_EN BIT10 +#define B_PMC_PWRM_GEN_PMCON_B_PWRBTN_LVL BIT9 +#define B_PMC_PWRM_GEN_PMCON_B_SMI_LOCK BIT4 +#define B_PMC_PWRM_GEN_PMCON_B_RTC_PWR_STS BIT2 + +#define R_PMC_PWRM_CRID 0x1030 ///< Configured Revision ID +#define B_PMC_PWRM_CRID_RID_SEL (BIT0 | BIT1) ///< RID Select +#define V_PMC_PWRM_CRID_RID_SEL_REVISIONID 0 +#define V_PMC_PWRM_CRID_RID_SEL_CRID0 1 +#define V_PMC_PWRM_CRID_RID_SEL_CRID1 2 +#define B_PMC_PWRM_CRID_CRID_LK BIT31 ///< CRID Lock + +#define R_PMC_PWRM_ETR3 0x1048 ///< in CNL this is PWRM register +#define B_PMC_PWRM_ETR3_CF9LOCK BIT31 ///< CF9h Lockdown +#define B_PMC_PWRM_ETR3_LATCH_EVENTS_C10_EXIT BIT30 +#define B_PMC_PWRM_ETR3_USB_CACHE_DIS BIT21 +#define B_PMC_PWRM_ETR3_CF9GR BIT20 ///< CF9h Global Reset +#define B_PMC_PWRM_ETR3_SKIP_HOST_RST_HS BIT19 +#define B_PMC_PWRM_ETR3_CWORWRE BIT18 +#define B_PMC_PWRM_THROT_1_VR_ALERT BIT0 + +#define R_PMC_PWRM_SSML 0x104C ///< Set Strap Msg Lock +#define B_PMC_PWRM_SSML_SSL BIT0 ///< Set_Strap Lock +#define R_PMC_PWRM_SSMC 0x1050 ///< Set Strap Msg Control +#define B_PMC_PWRM_SSMC_SSMS BIT0 ///< Set_Strap Mux Select +#define R_PMC_PWRM_SSMD 0x1054 ///< Set Strap Msg Data + +#define R_PMC_PWRM_CRID_UIP 0x10B0 ///< CRID update in progress +#define B_PMC_PWRM_CRID_UIP_CRIP_UIP BIT0 ///< CRID update in progress + +#define R_PMC_PWRM_MODPHY_PM_CFG1 0x10C0 +#define R_PMC_PWRM_MODPHY_PM_CFG2 0x10C4 +#define B_PMC_PWRM_MODPHY_PM_CFG2_MLSPDDGE BIT30 ///< ModPHY Lane SUS Power Domain Dynamic Gating Enable +#define B_PMC_PWRM_MODPHY_PM_CFG2_EMFC BIT29 ///< Enable ModPHY FET Control +#define B_PMC_PWRM_MODPHY_PM_CFG2_EFRT (BIT28 | BIT27 | BIT26 | BIT25 | BIT24) ///< External FET Ramp Time +#define N_PMC_PWRM_MODPHY_PM_CFG2_EFRT 24 +#define V_PMC_PWRM_MODPHY_PM_CFG2_EFRT_200US 0x0A +#define B_PMC_PWRM_MODPHY_PM_CFG2_ASLOR_UFS BIT16 ///< UFS ModPHY SPD SPD Override + +#define R_PMC_PWRM_MODPHY_PM_CFG3 0x10C8 ///< modPHY Power Management Configuration Reg 2 +#define B_PMC_PWRM_MODPHY_PM_CFG3_MLSPDDGE BIT30 ///< ModPHY Lane SUS Power Domain Dynamic Gating Enable +#define B_PMC_PWRM_MODPHY_PM_CFG3_EMFC BIT29 ///< Enable ModPHY FET Control +#define B_PMC_PWRM_MODPHY_PM_CFG3_EFRT (BIT28 | BIT27 | BIT26 | BIT25 | BIT24) ///< External FET Ramp Time +#define N_PMC_PWRM_MODPHY_PM_CFG3_EFRT 24 +#define V_PMC_PWRM_MODPHY_PM_CFG3_EFRT_200US 0x0A +#define B_PMC_PWRM_MODPHY_PM_CFG3_MSPDRTREQ_UFS BIT16 ///< UFS ModPHY SPD RT Request +#define B_PMC_PWRM_MODPHY_PM_CFG3_MSPDRTREQ_XDCI BIT15 ///< xDCI ModPHY SPD RT Request +#define B_PMC_PWRM_MODPHY_PM_CFG3_MSPDRTREQ_XHCI BIT14 ///< xHCI ModPHY SPD RT Request +#define B_PMC_PWRM_MODPHY_PM_CFG3_MSPDRTREQ_GBE BIT13 ///< GbE ModPHY SPD RT Request +#define B_PMC_PWRM_MODPHY_PM_CFG3_MSPDRTREQ_SATA BIT12 ///< SATA ModPHY SPD RT Request +#define B_PMC_PWRM_MODPHY_PM_CFG3_MPLSPDDGE BIT1 ///< ModPHY Per-Lane SUS Well Dynamic Gating +#define B_PMC_PWRM_MODPHY_PM_CFG3_C10_QUAL_MPHYPG BIT0 ///< C10 qualification for MPHY power gating + +#define R_PMC_PWRM_MODPHY_PM_CFG4 0x10CC +#define B_PMC_PWRM_MODPHY_PM_CFG4_ASLOR_UFS BIT16 ///< UFS ModPHY SPD SPD Override +#define R_PMC_PWRM_MODPHY_PM_CFG5 0x10D0 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_UFS2 BIT26 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_DMI BIT25 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_E3 BIT24 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_E2 BIT23 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_E1 BIT22 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_E0 BIT21 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_D3 BIT20 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_D2 BIT19 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_D1 BIT18 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_D0 BIT17 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_UFS BIT16 ///< UFS ModPHY SPD RT Request +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_XDCI BIT15 ///< xDCI ModPHY SPD RT Request +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_XHCI BIT14 ///< xHCI ModPHY SPD RT Request +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_GBE BIT13 ///< GbE ModPHY SPD RT Request +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_SATA BIT12 ///< SATA ModPHY SPD RT Request +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_C3 BIT11 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_C2 BIT10 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_C1 BIT9 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_C0 BIT8 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_B3 BIT7 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_B2 BIT6 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_B1 BIT5 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_B0 BIT4 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_A3 BIT3 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_A2 BIT2 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_A1 BIT1 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_A0 BIT0 +#define R_PMC_PWRM_MODPHY_PM_CFG6 0x10D4 + +#define R_PMC_PWRM_CPPM_MPG_POL1A 0x10E0 ///< CPPM modPHY Gating Policy Reg 1A +#define B_PMC_PWRM_CPPM_MPG_POL1A_CPPM_MODPHY_QUAL BIT30 ///< CPPM Shutdown Qualifier Enable for ModPHY +#define B_PMC_PWRM_CPPM_MPG_POL1A_LT_MODPHY_SEL BIT29 ///< ASLT/PLT Selection for ModPHY +#define B_PMC_PWRM_CPPM_MPG_POL1A_LTR_MODPHY_THRESH (0x000001FF) ///< LTR Threshold for ModPHY, [8:0] + +#define R_PMC_PWRM_EXT_V1P05_VR_CONFIG 0x11C0 +#define R_PMC_PWRM_EXT_VNN_VR_CONFIG0 0x11C4 +#define R_PMC_PWRM_VCCIN_AUX_CFG1 0x11D0 +#define R_PMC_PWRM_VCCIN_AUX_CFG2 0x11D4 + +#define R_PMC_PWRM_WINIDLE_BIOS_ENABLE 0x1400 +#define B_PMC_PWRM_WINIDLE_BIOS_ENABLE_WI_LOCK BIT31 +#define B_PMC_PWRM_WINIDLE_BIOS_ENABLE_WI_ENABLE BIT0 + +#define R_PMC_PWRM_WADT_AC 0x1800 +#define R_PMC_PWRM_PRSTS 0x1810 ///< Power and Reset Status +#define B_PMC_PWRM_PRSTS_VE_WD_TMR_STS BIT7 ///< VE Watchdog Timer Status +#define B_PMC_PWRM_PRSTS_WOL_OVR_WK_STS BIT5 +#define B_PMC_PWRM_PRSTS_FIELD_1 BIT4 +#define B_PMC_PWRM_PRSTS_ME_WAKE_STS BIT0 + +#define R_PMC_PWRM_1814 0x1814 +#define R_PMC_PWRM_CFG 0x1818 ///< Power Management Configuration +#define B_PMC_PWRM_CFG_ALLOW_24_OSC_SD BIT29 ///< Allow 24MHz Crystal Oscillator Shutdown +#define B_PMC_PWRM_CFG_DBG_MODE_LOCK BIT27 ///< Debug Mode Lock +#define B_PMC_PWRM_CFG_ALLOW_USB2_CORE_PG BIT25 ///< Allow USB2 Core Power Gating +#define B_PMC_PWRM_CFG_ER_LOCK BIT24 ///< Energy Reporting Lock +#define B_PMC_PWRM_CFG_EN_PMC_UNC_ERR BIT23 ///< Enable Global Reset on Uncorrectable Parity Error on PMC SRAM Interface +#define B_PMC_PWRM_CFG_PMCREAD_DISABLE BIT22 ///< Disable Reads to PMC +#define B_PMC_PWRM_CFG_RTC_DS_WAKE_DIS BIT21 ///< RTC Wake from Deep S4/S5 Disable +#define B_PMC_PWRM_CFG_SSMAW_MASK (BIT19 | BIT18) ///< SLP_SUS# Min Assertion Width +#define V_PMC_PWRM_CFG_SSMAW_4S (BIT19 | BIT18) ///< 4 seconds +#define V_PMC_PWRM_CFG_SSMAW_1S BIT19 ///< 1 second +#define V_PMC_PWRM_CFG_SSMAW_0_5S BIT18 ///< 0.5 second (500ms) +#define V_PMC_PWRM_CFG_SSMAW_0S 0 ///< 0 second +#define B_PMC_PWRM_CFG_SAMAW_MASK (BIT17 | BIT16) ///< SLP_A# Min Assertion Width +#define V_PMC_PWRM_CFG_SAMAW_2S (BIT17 | BIT16) ///< 2 seconds +#define V_PMC_PWRM_CFG_SAMAW_98ms BIT17 ///< 98ms +#define V_PMC_PWRM_CFG_SAMAW_4S BIT16 ///< 4 seconds +#define V_PMC_PWRM_CFG_SAMAW_0S 0 ///< 0 second +#define B_PMC_PWRM_CFG_RPCD_MASK (BIT9 | BIT8) ///< Reset Power Cycle Duration +#define V_PMC_PWRM_CFG_RPCD_1S (BIT9 | BIT8) ///< 1-2 seconds +#define V_PMC_PWRM_CFG_RPCD_2S BIT9 ///< 2-3 seconds +#define V_PMC_PWRM_CFG_RPCD_3S BIT8 ///< 3-4 seconds +#define V_PMC_PWRM_CFG_RPCD_4S 0 ///< 4-5 seconds (Default) +#define B_PMC_PWRM_CFG_COCS BIT5 ///< CPU OC Strap +#define B_PMC_PWRM_CFG_ER_EN BIT2 ///< Energy Reporting Enable +#define B_PMC_PWRM_CFG_TIMING_TPCH25 (BIT1 | BIT0) ///< tPCH25 timing + +#define R_PMC_PWRM_S3_PWRGATE_POL 0x1828 ///< S3 Power Gating Policies +#define B_PMC_PWRM_S3_PWRGATE_POL_S3DC_GATE_SUS BIT1 ///< Deep S3 Enable in DC Mode +#define B_PMC_PWRM_S3_PWRGATE_POL_S3AC_GATE_SUS BIT0 ///< Deep S3 Enable in AC Mode + +#define R_PMC_PWRM_S4_PWRGATE_POL 0x182C ///< Deep S4 Power Policies +#define B_PMC_PWRM_S4_PWRGATE_POL_S4DC_GATE_SUS BIT1 ///< Deep S4 Enable in DC Mode +#define B_PMC_PWRM_S4_PWRGATE_POL_S4AC_GATE_SUS BIT0 ///< Deep S4 Enable in AC Mode + +#define R_PMC_PWRM_S5_PWRGATE_POL 0x1830 ///< Deep S5 Power Policies +#define B_PMC_PWRM_S5_PWRGATE_POL_S5DC_GATE_SUS BIT15 ///< Deep S5 Enable in DC Mode +#define B_PMC_PWRM_S5_PWRGATE_POL_S5AC_GATE_SUS BIT14 ///< Deep S5 Enable in AC Mode + +#define R_PMC_PWRM_DSX_CFG 0x1834 ///< Deep SX Configuration +#define B_PMC_PWRM_DSX_CFG_WAKE_PIN_DSX_EN BIT2 ///< WAKE# Pin DeepSx Enable +#define B_PMC_PWRM_DSX_CFG_ACPRES_PD_DSX_DIS BIT1 ///< AC_PRESENT pin pulldown in DeepSx disable +#define B_PMC_PWRM_DSX_CFG_LAN_WAKE_EN BIT0 ///< LAN_WAKE Pin DeepSx Enable + +#define R_PMC_PWRM_CFG2 0x183C ///< Power Management Configuration Reg 2 +#define B_PMC_PWRM_CFG2_PBOP (BIT31 | BIT30 | BIT29) ///< Power Button Override Period (PBOP) +#define N_PMC_PWRM_CFG2_PBOP 29 ///< Power Button Override Period (PBOP) +#define B_PMC_PWRM_CFG2_PB_DIS BIT28 ///< Power Button Native Mode Disable (PB_DIS) +#define B_PMC_PWRM_CFG2_EN_DBG_MSG BIT27 ///< Enable PMC Debug Messages +#define B_PMC_PWRM_CFG2_DRAM_RESET_CTL BIT26 ///< DRAM RESET# control +#define N_PMC_PWRM_CFG2_DRAM_RESET_CTL 26 + +#define R_PMC_PWRM_EN_SN_SLOW_RING 0x1848 ///< Enable Snoop Request to SLOW_RING +#define R_PMC_PWRM_EN_SN_SLOW_RING2 0x184C ///< Enable Snoop Request to SLOW_RING 2nd Reg +#define R_PMC_PWRM_EN_SN_SA 0x1850 ///< Enable Snoop Request to SA +#define R_PMC_PWRM_EN_SN_SA2 0x1854 ///< Enable Snoop Request to SA 2nd Reg +#define R_PMC_PWRM_EN_SN_SLOW_RING_CF 0x1858 ///< Enable Snoop Request to SLOW_RING_CF +#define R_PMC_PWRM_EN_NS_SA 0x1868 ///< Enable Non-Snoop Request to SA +#define R_PMC_PWRM_EN_CW_SLOW_RING 0x1880 ///< Enable Clock Wake to SLOW_RING +#define R_PMC_PWRM_EN_CW_SLOW_RING2 0x1884 ///< Enable Clock Wake to SLOW_RING 2nd Reg +#define R_PMC_PWRM_EN_CW_SA 0x1888 ///< Enable Clock Wake to SA +#define R_PMC_PWRM_EN_CW_SA2 0x188C ///< Enable Clock Wake to SA 2nd Reg +#define R_PMC_PWRM_EN_CW_SLOW_RING_CF 0x1898 ///< Enable Clock Wake to SLOW_RING_CF +#define R_PMC_PWRM_EN_PA_SLOW_RING 0x18A8 ///< Enable Pegged Active to SLOW_RING +#define R_PMC_PWRM_EN_PA_SLOW_RING2 0x18AC ///< Enable Pegged Active to SLOW_RING 2nd Reg +#define B_PMC_PWRM_EN_PA_SLOW_RING2_GBETSN BIT26 ///< GBETSN Pegged Active to SLOW_RING +#define R_PMC_PWRM_EN_PA_SA 0x18B0 ///< Enable Pegged Active to SA +#define R_PMC_PWRM_EN_PA_SA2 0x18B4 ///< Enable Pegged Active to SA 2nd Reg +#define B_PMC_PWRM_EN_PA_SA2_GBETSN BIT26 ///< GBETSN Pegged Active to SA +#define R_PMC_PWRM_EN_MISC_EVENT 0x18C0 ///< Enable Misc PM_SYNC Events +#define R_PMC_PWRM_PMSYNC_TPR_CONFIG 0x18C4 +#define R_PMC_PWRM_SLP_S0_RESIDENCY_COUNTER 0x193C +#define R_PMC_PWRM_PS_ON_COUNTER 0x18F8 + +#define R_PMC_PWRM_PMSYNC_MISC_CFG 0x18C8 +#define B_PMC_PWRM_PMSYNC_TPR_CONFIG_LOCK BIT31 +#define B_PMC_PWRM_PMSYNC_PCH2CPU_TT_EN BIT26 +#define B_PMC_PWRM_PMSYNC_PCH2CPU_TT_STATE (BIT25 | BIT24) +#define N_PMC_PWRM_PMSYNC_PCH2CPU_TT_STATE 24 +#define V_PMC_PWRM_PMSYNC_PCH2CPU_TT_STATE_1 1 +#define B_PMC_PWRM_PMSYNC_PM_SYNC_LOCK BIT15 ///< PM_SYNC Configuration Lock +#define B_PMC_PWRM_PMSYNC_GPIO_D_SEL BIT11 +#define B_PMC_PWRM_PMSYNC_GPIO_C_SEL BIT10 + +#define R_PMC_PWRM_PM_SYNC_STATE_HYS 0x18D0 ///< PM_SYNC State Hysteresis +#define R_PMC_PWRM_PM_SYNC_MODE 0x18D4 ///< PM_SYNC Pin Mode + +#define R_PMC_PWRM_CFG3 0x18E0 ///< Power Management Configuration Reg 3 +#define B_PMC_PWRM_CFG3_HOST_WLAN_PP_EN BIT17 ///< Host Wireless LAN Phy Power Enable +#define B_PMC_PWRM_CFG3_DSX_WLAN_PP_EN BIT16 ///< Deep-Sx WLAN Phy Power Enable +#define B_PMC_PWRM_CFG3_HOST_MISC_CORE_CFG_CPU_VCC_MAP BIT2 ///< Enable CPU Vcc Mapping + +#define R_PMC_PWRM_PM_DOWN_PPB_CFG 0x18E4 ///< PM_DOWN PCH_POWER_BUDGET CONFIGURATION + +#define R_PMC_PWRM_CFG4 0x18E8 ///< Power Management Configuration Reg 4 +#define B_PMC_PWRM_CFG4_CEC_EN BIT31 ///< CEC_EN +#define B_PMC_PWRM_CFG4_U2_PHY_PG_EN BIT30 ///< USB2 PHY SUS Well Power Gating Enable +#define B_PMC_PWRM_CFG4_SLPS0_PSON_TMR (BIT29 | BIT28 | BIT27 | BIT26 | BIT25 | BIT24 | BIT23) ///< SLPS0_PSON_TMR +#define N_PMC_PWRM_CFG4_SLPS0_PSON_TMR 23 +#define V_PMC_PWRM_CFG4_SLPS0_PSON_TMR_5MS 0xA +#define V_PMC_PWRM_CFG4_SLPS0_PSON_TMR_15_5MS 0x1F +#define B_PMC_PWRM_CFG4_PSON_SLPS0_TMR (BIT22 | BIT21 | BIT20 | BIT19 | BIT18) ///< PSON_SLPS0_TMR +#define N_PMC_PWRM_CFG4_PSON_SLPS0_TMR 18 +#define V_PMC_PWRM_CFG4_PSON_SLPS0_TMR_100MS 0x5 +#define V_PMC_PWRM_CFG4_PSON_SLPS0_TMR_620MS 0x1F +#define N_PMC_PWRM_CFG4_VCCST_TMR 12 +#define B_PMC_PWRM_CFG4_VCCST_TMR (BIT15 | BIT14 | BIT13 | BIT12) +#define B_PMC_PWRM_CFG4_CPU_IOVR_RAMP_DUR (0x000001FF) ///< CPU I/O VR Ramp Duration, [8:0] +#define N_PMC_PWRM_CFG4_CPU_IOVR_RAMP_DUR 0 + +#define R_PMC_PWRM_CPU_EPOC 0x18EC +#define N_PMC_PWRM_CPU_EPOC_DATA_17 17 +#define N_PMC_PWRM_CPU_EPOC_DATA_20 20 + +#define R_PCH_PMC_MSG_ADR_EN 0x18F0 ///< ADR Enable +#define B_PCH_PMC_MSG_ADR_EN_HPR_ADR_EN 0x10000000 ///< Host Partition Reset ADR Enable +#define N_PCH_PMC_MSG_ADR_EN_HPR_ADR_EN 28 +#define B_PCH_PMC_MSG_ADR_EN_ADR_FEAT_EN 0x1 ///< ADR Feature Enable +#define N_PCH_PMC_MSG_ADR_EN_ADR_FEAT_EN 0 + +#define R_PMC_PWRM_PM_SYNC_MODE_C0 0x18F4 +#define R_PMC_PWRM_ACPI_TMR_CTL 0x18FC +#define B_PMC_PWRM_ACPI_TMR_CTL_DIS BIT1 + +#define R_PCH_PMC_MSG_ADR_GEN_CFG 0x1908 ///< ADR General Configuration Register +#define B_PCH_PMC_MSG_ADR_GEN_CFG_ADR_P2_TIMER_SCALE 0x1C000000 ///< ADR Timer Scale +#define N_PCH_PMC_MSG_ADR_GEN_CFG_ADR_P2_TIMER_SCALE 26 +#define B_PCH_PMC_MSG_ADR_GEN_CFG_ADR_P2_EN 0x80000 ///< ADR Phase 2 Enable +#define N_PCH_PMC_MSG_ADR_GEN_CFG_ADR_P2_EN 19 +#define B_PCH_PMC_MSG_ADR_GEN_CFG_ADR_P2_TIMER_TOV 0x7F800 ///< ADR Timer Base +#define N_PCH_PMC_MSG_ADR_GEN_CFG_ADR_P2_TIMER_TOV 11 +#define B_PCH_PMC_MSG_ADR_GEN_CFG_ADR_P1_TIMER_SCALE 0x700 ///< ADR Timer Scale (Tick Frequency) +#define N_PCH_PMC_MSG_ADR_GEN_CFG_ADR_P1_TIMER_SCALE 8 +#define B_PCH_PMC_MSG_ADR_GEN_CFG_ADR_P1_TIMER_TOV 0xFF ///< ADR Timer Base +#define N_PCH_PMC_MSG_ADR_GEN_CFG_ADR_P1_TIMER_TOV 0 + +#define R_PMC_PWRM_GPIO_CFG 0x1920 +#define B_PMC_PWRM_GPIO_CFG_GPE0_DW2 (BIT11 | BIT10 | BIT9 | BIT8) +#define N_PMC_PWRM_GPIO_CFG_GPE0_DW2 8 +#define B_PMC_PWRM_GPIO_CFG_GPE0_DW1 (BIT7 | BIT6 | BIT5 | BIT4) +#define N_PMC_PWRM_GPIO_CFG_GPE0_DW1 4 +#define B_PMC_PWRM_GPIO_CFG_GPE0_DW0 (BIT3 | BIT2 | BIT1 | BIT0) +#define N_PMC_PWRM_GPIO_CFG_GPE0_DW0 0 + +#define R_PMC_PWRM_1924 0x1924 +#define R_PMC_PWRM_PMLDOCTRL 0x1A00 ///< PMC LDO Control Register +#define B_PMC_PWRM_PMDLOCTRL_U31P2_LDODSEN BIT24 +#define B_PMC_PWRM_PMLDOCTRL_CNVIP24LDOLPEN BIT9 +#define B_PMC_PWRM_PMLDOCTRL_USB2TS1P3LDODSEN BIT0 + +#define R_PMC_PWRM_HPR_CAUSE0 0x192C ///< Host partition reset causes +#define B_PMC_PWRM_HPR_CAUSE0_GBL_TO_HOST BIT15 ///< Global reset converted to Host reset + +#define R_PMC_PWRM_CORE_SPARE_GCR 0x195C + +#define R_PCH_PMC_MSG_ADR_CTRL_STS 0x1960 ///< PCH Power Management Status +#define B_PCH_PMC_MSG_ADR_CTRL_STS_ADR_RST_STS 0x10000 ///< ADR Reset Status +#define N_PCH_PMC_MSG_ADR_CTRL_STS_ADR_RST_STS 16 + +#define R_PCH_PMC_MSG_ADR_GBLRST_EN_0 0x191C ///< ADR Global Reset Enable 0 +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_PPBR_PARITY_ERR 0x20000000 ///< ppbr_parity_err +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_PMC_RF_FUSA_ERR 0x1000000 ///< pmc_rf_fusa_err +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_PMC_IROM_PARITY 0x800000 ///< pmc_irom_parity +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_PMC_SRAM_UNC_ERR 0x400000 ///< pmc_sram_unc_err +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_CSE_HEC_UNC_ERR 0x200000 ///< cse_hec_unc_err +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_OCWDT_ICC 0x100000 ///< ocwdt_icc +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_OCWDT_NOICC 0x80000 ///< ocwdt_noicc +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_ADR_GPIO 0x40000 ///< adr_gpio +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_ME_UNC_ERR 0x20000 ///< me_unc_err +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_CPU_THRM_WDT 0x10000 ///< cpu_thrm_wdt +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_MIA_UX_ERR 0x8000 ///< mia_ux_err +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_MIA_UXS_ERR 0x4000 ///< mia_uxs_err +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_SYSPWR_FLR 0x1000 ///< syspwr_flr +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_PCHPWR_FLR 0x800 ///< pchpwr_flr +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_PMC_FW 0x400 ///< pmc_fw +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_ME_WDT 0x200 ///< me_wdt +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_PMC_WDT 0x100 ///< pmc_wdt +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_LT_RESET 0x80 ///< lt_reset +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_MEGBL 0x40 ///< megbl +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_CPU_THRM 0x20 ///< cpu_thrm +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_ME_PBO 0x10 ///< me_pbo +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_PCH_THRM 0x8 ///< pch_thrm +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_PMC_UNC_ERR 0x4 ///< pmc_unc_err +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_PBO 0x2 ///< pbo + +#define R_PMC_PWRM_S0IX_LDO_OFF_COUNT 0x1A04 ///< PMC LDO S0ix Shutdown Count Register +#define B_PMC_PWRM_S0IX_LDO_OFF_COUNT_LOCK BIT31 +#define R_PMC_PWRM_S0_LDO_OFF_COUNT 0x1A08 ///< PMC LDO S0 Shutdown Count Register +#define B_PMC_PWRM_S0_LDO_OFF_COUNT_LOCK BIT31 + +#define R_PMC_PWRM_OBFF_CFG 0x1B14 ///< OBFF Configuration +#define R_PMC_PWRM_1B1C 0x1B1C +#define R_PMC_PWRM_CPPM_MISC_CFG 0x1B20 ///< CPPM Miscellaneous Configuration +#define R_PMC_PWRM_CPPM_CG_POL1A 0x1B24 ///< CPPM Clock Gating Policy Reg 1 +#define R_PMC_PWRM_CPPM_CG_POL1B 0x1B28 ///< CPPM Clock Gating Policy Reg 1 +#define B_PMC_PWRM_CPPM_FIVR_POL1B_TNTE_FIVR_VOLT_PRE_WAKE 0x1FFFF ///< TNTE PreWake for FIVR Voltage +#define R_PMC_PWRM_CPPM_CG_POL2A 0x1B40 ///< CPPM Clock Gating Policy Reg 3 +#define R_PMC_PWRM_1B4C 0x1B4C + +#define R_PMC_PWRM_CPPM_CG_POL3A 0x1BA8 ///< CPPM Clock Gating Policy Reg 5 +#define B_PMC_PWRM_CPPM_CG_POLXA_LT_GX_SEL BIT29 ///< ASLT/PLT Selection for Clock Source Group 1 +#define B_PMC_PWRM_CPPM_CG_POLXA_CPPM_GX_QUAL BIT30 ///< CPPM Shutdown Qualifier Enable for Clock Source Group X +#define B_PMC_PWRM_CPPM_CG_POLXA_LTR_GX_THRESH (0x000001FF) ///< LTR Threshold for Clock Source Group X, [8:0] + +#define R_PMC_PWRM_1BD0 0x1BD0 + +#define R_PMC_PWRM_ACPI_CNT 0x1BD8 ///< in CNL located in PWRM +#define B_PMC_PWRM_ACPI_CNT_PWRM_EN BIT8 ///< PWRM enable +#define B_PMC_PWRM_ACPI_CNT_ACPI_EN BIT7 ///< ACPI enable +#define B_PMC_PWRM_ACPI_CNT_SCIS (BIT2 | BIT1 | BIT0) ///< SCI IRQ select +#define V_PMC_PWRM_ACPI_CNT_SCIS_IRQ9 0 +#define V_PMC_PWRM_ACPI_CNT_SCIS_IRQ10 1 +#define V_PMC_PWRM_ACPI_CNT_SCIS_IRQ11 2 +#define V_PMC_PWRM_ACPI_CNT_SCIS_IRQ20 4 +#define V_PMC_PWRM_ACPI_CNT_SCIS_IRQ21 5 +#define V_PMC_PWRM_ACPI_CNT_SCIS_IRQ22 6 +#define V_PMC_PWRM_ACPI_CNT_SCIS_IRQ23 7 + +#define R_PMC_PWRM_BM_CX_CNF 0x1BDC ///< in CNL this is PWRM register +#define B_PMC_PWRM_BM_CX_CNF_STORAGE_BREAK_EN BIT31 +#define B_PMC_PWRM_BM_CX_CNF_PCIE_BREAK_EN BIT30 +#define B_PMC_PWRM_BM_CX_CNF_AZ_BREAK_EN BIT24 +#define B_PMC_PWRM_BM_CX_CNF_DPSN_BREAK_EN BIT19 +#define B_PMC_PWRM_BM_CX_CNF_XHCI_BREAK_EN BIT17 +#define B_PMC_PWRM_BM_CX_CNF_SATA3_BREAK_EN BIT16 +#define B_PMC_PWRM_BM_CX_CNF_SCRATCHPAD BIT15 +#define B_PMC_PWRM_BM_CX_CNF_PHOLD_BM_STS_BLOCK BIT14 +#define B_PMC_PWRM_BM_CX_CNF_MASK_CF BIT11 +#define B_PMC_PWRM_BM_CX_CNF_BM_STS_ZERO_EN BIT10 +#define B_PMC_PWRM_BM_CX_CNF_PM_SYNC_MSG_MODE BIT9 + +#define R_PMC_PWRM_THROT_1 0x1BE0 +#define B_PMC_PWRM_THROT_1_VR_ALERT BIT0 + +#define R_PMC_PWRM_CS_SD_CTL1 0x1BE8 ///< Clock Source Shutdown Control Reg 1 +#define B_PMC_PWRM_CS_SD_CTL1_CS5_CTL_CFG (BIT22 | BIT21 | BIT20) ///< Clock Source 5 Control Configuration +#define N_PMC_PWRM_CS_SD_CTL1_CS5_CTL_CFG 20 +#define B_PMC_PWRM_CS_SD_CTL1_CS1_CTL_CFG (BIT2 | BIT1 | BIT0) ///< Clock Source 1 Control Configuration +#define N_PMC_PWRM_CS_SD_CTL1_CS1_CTL_CFG 0 + +#define R_PMC_PWRM_CS_SD_CTL2 0x1BEC ///< Clock Source Shutdown Control Reg 2 +#define B_PMC_PWRM_CS_SD_CTL2_CS3_OVR_EN BIT18 ///< Clock Source 3 Override Enable + +#define R_PMC_PWRM_LPM_ADEM_HOST_CTRL 0x1C20 ///< Low Power Mode Auto-Demotion Host Control +#define B_PMC_PWRM_LPM_ADEM_HOST_CTRL_EN BIT0 ///< Low Power Mode Auto-Demotion Host Enable + +#define R_PMC_PWRM_HSWPGCR1 0x1DD0 +#define B_PMC_PWRM_SW_PG_CTRL_LOCK BIT31 +#define B_PMC_PWRM_NPK_AON_SW_PG_CTRL BIT1 +#define B_PMC_PWRM_NPK_VNN_SW_PG_CTRL BIT0 + +#define R_PMC_PWRM_1E00 0x1E00 +#define R_PMC_PWRM_1E04 0x1E04 + +#define R_PMC_PWRM_ST_PG_FDIS_PMC_1 0x1E20 ///< Static PG Related Function Disable Register 1 +#define B_PMC_PWRM_ST_PG_FDIS_PMC_1_CNVI_FDIS_PMC BIT1 ///< CNVi Function Disable (PMC Version) (CNVI_FDIS_PMC) +#define B_PMC_PWRM_ST_PG_FDIS_PMC_1_ST_FDIS_LK BIT31 ///< Static Function Disable Lock (ST_FDIS_LK) +#define B_PMC_PWRM_ST_PG_FDIS_PMC_1_CAM_FDIS_PMC BIT6 ///< Camera Function Disable (PMC Version) (CAM_FDIS_PMC) +#define B_PMC_PWRM_ST_PG_FDIS_PMC_1_ISH_FDIS_PMC BIT5 ///< SH Function Disable (PMC Version) (ISH_FDIS_PMC) +#define B_PMC_PWRM_ST_PG_FDIS_PMC_1_GBE_FDIS_PMC BIT0 ///< GBE Function Disable (PMC Version) (GBE_FDIS_PMC) + +#define R_PMC_PWRM_ST_PG_FDIS_PMC_2 0x1E24 ///< Static Function Disable Control Register 2 +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_GSPI2_FDIS_PMC BIT11 ///< SerialIo Controller GSPI Device 2 Function Disable +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_GSPI1_FDIS_PMC BIT10 ///< SerialIo Controller GSPI Device 1 Function Disable +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_GSPI0_FDIS_PMC BIT9 ///< SerialIo Controller GSPI Device 0 Function Disable +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_UART2_FDIS_PMC BIT8 ///< SerialIo Controller UART Device 2 Function Disable +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_UART1_FDIS_PMC BIT7 ///< SerialIo Controller UART Device 1 Function Disable +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_UART0_FDIS_PMC BIT6 ///< SerialIo Controller UART Device 0 Function Disable +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_I2C5_FDIS_PMC BIT5 ///< SerialIo Controller I2C Device 5 Function Disable +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_I2C4_FDIS_PMC BIT4 ///< SerialIo Controller I2C Device 4 Function Disable +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_I2C3_FDIS_PMC BIT3 ///< SerialIo Controller I2C Device 3 Function Disable +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_I2C2_FDIS_PMC BIT2 ///< SerialIo Controller I2C Device 2 Function Disable +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_I2C1_FDIS_PMC BIT1 ///< SerialIo Controller I2C Device 1 Function Disable +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_I2C0_FDIS_PMC BIT0 ///< SerialIo Controller I2C Device 0 Function Disable +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO 0xFFF ///< SerialIo Devices Disable Mask + +#define R_PMC_PWRM_NST_PG_FDIS_1 0x1E28 +#define B_PCH_H_PMC_PWRM_NST_PG_FDIS_1_PCIE_F3_FDIS_PMC BIT31 ///< PCIe Controller F Port 3 Function Disable +#define B_PCH_H_PMC_PWRM_NST_PG_FDIS_1_PCIE_F2_FDIS_PMC BIT30 ///< PCIe Controller F Port 2 Function Disable +#define B_PCH_H_PMC_PWRM_NST_PG_FDIS_1_PCIE_F1_FDIS_PMC BIT29 ///< PCIe Controller F Port 1 Function Disable +#define B_PCH_H_PMC_PWRM_NST_PG_FDIS_1_PCIE_F0_FDIS_PMC BIT28 ///< PCIe Controller F Port 0 Function Disable +#define B_PCH_LP_PMC_PWRM_NST_PG_FDIS_1_SDCARD_FDIS_PMC BIT29 ///< SD Card Function Disable +#define B_PCH_H_PMC_PWRM_NST_PG_FDIS_1_SDCARD_FDIS_PMC BIT27 ///< SD Card Function Disable +#define B_PCH_LP_PMC_PWRM_NST_PG_FDIS_1_EMMC_FDIS_PMC BIT28 ///< eMMC Function Disable +#define B_PCH_LP_PMC_PWRM_NST_PG_FDIS_1_UFS_FDIS_PMC BIT27 ///< UFS Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_XDCI_FDIS_PMC BIT26 ///< XDCI Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_SMBUS_FDIS_PMC BIT25 ///< Smbus Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_ADSP_FDIS_PMC BIT23 ///< ADSP Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_SATA_FDIS_PMC BIT22 ///< SATA Function Disable +#define B_PCH_H_PMC_PWRM_NST_PG_FDIS_1_PCIE_E3_FDIS_PMC BIT21 ///< PCIe Controller E Port 3 Function Disable +#define B_PCH_H_PMC_PWRM_NST_PG_FDIS_1_PCIE_E2_FDIS_PMC BIT20 ///< PCIe Controller E Port 2 Function Disable +#define B_PCH_H_PMC_PWRM_NST_PG_FDIS_1_PCIE_E1_FDIS_PMC BIT19 ///< PCIe Controller E Port 1 Function Disable +#define B_PCH_H_PMC_PWRM_NST_PG_FDIS_1_PCIE_E0_FDIS_PMC BIT18 ///< PCIe Controller E Port 0 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_D3_FDIS_PMC BIT17 ///< PCIe Controller D Port 3 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_D2_FDIS_PMC BIT16 ///< PCIe Controller D Port 2 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_D1_FDIS_PMC BIT15 ///< PCIe Controller D Port 1 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_D0_FDIS_PMC BIT14 ///< PCIe Controller D Port 0 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_C3_FDIS_PMC BIT13 ///< PCIe Controller C Port 3 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_C2_FDIS_PMC BIT12 ///< PCIe Controller C Port 2 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_C1_FDIS_PMC BIT11 ///< PCIe Controller C Port 1 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_C0_FDIS_PMC BIT10 ///< PCIe Controller C Port 0 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_B3_FDIS_PMC BIT9 ///< PCIe Controller B Port 3 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_B2_FDIS_PMC BIT8 ///< PCIe Controller B Port 2 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_B1_FDIS_PMC BIT7 ///< PCIe Controller B Port 1 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_B0_FDIS_PMC BIT6 ///< PCIe Controller B Port 0 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_A3_FDIS_PMC BIT5 ///< PCIe Controller A Port 3 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_A2_FDIS_PMC BIT4 ///< PCIe Controller A Port 2 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_A1_FDIS_PMC BIT3 ///< PCIe Controller A Port 1 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_A0_FDIS_PMC BIT2 ///< PCIe Controller A Port 0 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_XHCI_FDIS_PMC BIT0 ///< XHCI Function Disable + +#define R_PMC_PWRM_FUSE_DIS_RD_1 0x1E40 ///< Fuse Disable Read 1 Register + +#define R_PMC_PWRM_FUSE_DIS_RD_2 0x1E44 ///< Fuse Disable Read 2 Register +#define B_PMC_PWRM_FUSE_DIS_RD_2_SPC_SS_DIS BIT25 ///< SPC Fuse Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_SPB_SS_DIS BIT24 ///< SPB Fuse Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_SPA_SS_DIS BIT23 ///< SPA Fuse Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_PSTH_FUSE_SS_DIS BIT21 ///< PSTH Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_DMI_FUSE_SS_DIS BIT20 ///< DMI Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_OTG_FUSE_SS_DIS BIT19 ///< OTG Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_XHCI_SS_DIS BIT18 ///< XHCI Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_FIA_FUSE_SS_DIS BIT17 ///< FIA Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_DSP_FUSE_SS_DIS BIT16 ///< DSP Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_SATA_FUSE_SS_DIS BIT15 ///< SATA Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_ICC_FUSE_SS_DIS BIT14 ///< ICC Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_LPC_FUSE_SS_DIS BIT13 ///< LPC Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_RTC_FUSE_SS_DIS BIT12 ///< RTC Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_P2S_FUSE_SS_DIS BIT11 ///< P2S Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_TRSB_FUSE_SS_DIS BIT10 ///< TRSB Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_SMB_FUSE_SS_DIS BIT9 ///< SMB Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_ITSS_FUSE_SS_DIS BIT8 ///< ITSS Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_UFSX2_FUSE_SS_DIS BIT7 ///< UFSX2 Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_SERIALIO_FUSE_SS_DIS BIT6 ///< SerialIo Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_EMMC_FUSE_SS_DIS BIT5 ///< EMMC Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_CNVI_FUSE_SS_DIS BIT4 ///< CNVi Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_P2D_FUSE_SS_DIS BIT3 ///< P2D Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_SDX_FUSE_SS_DIS BIT2 ///< SD Conroller Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_ISH_FUSE_SS_DIS BIT1 ///< ISH Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_GBE_FUSE_SS_DIS BIT0 ///< GBE Fuse or Soft Strap Disable + +#define R_PMC_PWRM_FUSE_DIS_RD_3 0x1E48 ///< Static PG Fuse and Soft Strap Disable Read Register 3 +#define B_PMC_PWRM_FUSE_DIS_RD_3_PNCRA3_FUSE_SS_DIS BIT3 ///< PNCRA3 Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_3_PNCRA2_FUSE_SS_DIS BIT2 ///< PNCRA2 Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_3_PNCRA1_FUSE_SS_DIS BIT1 ///< PNCRA1 Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_3_PNCRA_FUSE_SS_DIS BIT0 ///< PNCRA Fuse or Soft Strap Disable + +#define R_PMC_PWRM_1E4C 0x1E4C + +// +// Low Power Mode requirements - 1st register +// +#define R_PMC_LPM0_REQ_0 0x1000 ///<Low Power Mode 0 Requirements Reg 0 +// +// Low Power Mode requirements - End register +// +#define R_PMC_LPM7_REQ_5 0x1164 ///<Low Power Mode 7 Requirements Reg 5 +// +// Low Power Mode requirements - data length (byte) +// +#define PMC_LPM_REQ_DATA_LEN 192 +// +// Low Power Mode requirements - data length (bit) +// +#define PMC_LPM_REQ_BITS_DATA_LEN 1536 + +Scope (\_SB) { + // + // IPC Methods + // + // Send PMC IPC 1 Read/Write command + // Input + // Arg0: Command Command to be issued to PMC IPC 1 interface + // Arg1: SubCmdId SUB_CMD_ID for provided Command + // Arg2: CmdSize Total size in byte to be sent via PMC IPC 1 interface + // Arg3: WriteBuf0 1st DWORD Value to be issued to PMC IPC 1 interface + // Arg4: WriteBuf1 2nd DWORD Value to be issued to PMC IPC 1 interface + // Arg5: WriteBuf2 3rd DWORD Value to be issued to PMC IPC 1 interface + // Arg6: WriteBuf3 4th DWORD Value to be issued to PMC IPC 1 interface + // Output + // Package of data in below order: + // Status Status of the transaction {0 indicates success, non-zero indicates failure} + // Error Code Description + // ---------- --------------------- + // 1 Command Size Exceeds + // 2 Device failure + // 3 Timeout Occurred + // ---------- --------------------- + // ReadBuf Structure of 4 DWORDs to be filled by PMC IPC 1 interface + // + Method(IPCS, 7, Serialized){ + Name(RPKG, Package (5) { + Zero, // Status + Zero, // ReadBuf0 + Zero, // ReadBuf1 + Zero, // ReadBuf2 + Zero // ReadBuf3 + }) + + //ADBG("PMC IPC") // //ADBG:RestrictedContent + //ADBG (Concatenate("Command: ", ToHexString(Arg0))) // //ADBG:RestrictedContent + //ADBG (Concatenate("SubCmdId: ", ToHexString(Arg1))) // //ADBG:RestrictedContent + //ADBG (Concatenate("Size: ", ToHexString(Arg2))) // //ADBG:RestrictedContent + //ADBG (Concatenate("WBuff0: ", ToHexString(Arg3))) // //ADBG:RestrictedContent + //ADBG (Concatenate("WBuff1: ", ToHexString(Arg4))) // //ADBG:RestrictedContent + //ADBG (Concatenate("WBuff2: ", ToHexString(Arg5))) // //ADBG:RestrictedContent + //ADBG (Concatenate("WBuff3: ", ToHexString(Arg6))) // //ADBG:RestrictedContent + + if (LGreater(Arg2, 16)) // (CmdSize > 16) + { + //ADBG("CmdSize>16 Error") // PCH:InternalOnly + Store(1, Index(RPKG, 0)) // Store Errorcode of Command Size Exceeds to Status + Return(RPKG) + } + + // + // Program the Write Buffers with the Data that needs to be written to PMC + // + Store(Arg3,IWB0) + Store(Arg4,IWB1) + Store(Arg5,IWB2) + Store(Arg6,IWB3) + + // + // Program the command register with command and size + // + Store(0, Local0) + Add(Local0, ShiftLeft(Arg0,N_PMC_PWRM_IPC_CMD_COMMAND), Local0) + Add(Local0, ShiftLeft(Arg1,N_PMC_PWRM_IPC_CMD_CMD_ID), Local0) + Add(Local0, ShiftLeft(Arg2,N_PMC_PWRM_IPC_CMD_SIZE), Local0) + Store(Local0,CMDR) + + /// + /// Read the IPC_STS to get BUSY or Error status + /// Break on 10ms timeout or error + /// + Store(0, Local0) + While(1) { + If(LOr(LNot(IBSY),LEqual(IERR, 1))){ + Break + } + If(Lgreater(Local0, 10)) { // 10 ms timeout + //ADBG("IPC Busy TO") // //ADBG:RestrictedContent + Store(3, Index(RPKG, 0)) // Store Errorcode of Timeout Occurred to Status + Return(RPKG) + } + Sleep(1) + Increment(Local0) + } + If(LEqual(IERR,1)) { + //ADBG("IPC Error:") // //ADBG:RestrictedContent + //ADBG(IERC) // //ADBG:RestrictedContent + //ADBG(arg0) // //ADBG:RestrictedContent + //ADBG(arg1) // //ADBG:RestrictedContent + //ADBG(arg2) // //ADBG:RestrictedContent + //ADBG(arg3) // //ADBG:RestrictedContent + //ADBG(arg4) // //ADBG:RestrictedContent + //ADBG(arg5) // //ADBG:RestrictedContent + //ADBG(arg6) // //ADBG:RestrictedContent + Store(2, Index(RPKG, 0)) // Store Errorcode of Device Failure to Status + Return(RPKG) + } + + // + // Fill the ReadBuffer contents with the Data that needs to be read from PMC + // + Store(IRB0, Index(RPKG, 1)) // ReadBuf0 + Store(IRB1, Index(RPKG, 2)) // ReadBuf1 + Store(IRB2, Index(RPKG, 3)) // ReadBuf2 + Store(IRB3, Index(RPKG, 4)) // ReadBuf3 + + Return(RPKG) + } + + // + // Define PCH ACPIBASE I/O as an ACPI operating region. The base address + // can be found in Device 31, Function 2, Offset 40h. + // + /* + OperationRegion(PMIO, SystemIo, PMBS, 0x80) + Field(PMIO, ByteAcc, NoLock, Preserve) { + , 8, + PBSS, 1, // Power Button Status + Offset(R_ACPI_IO_GPE_CNTL), // 0x40, General Purpose Event Control + , 17, + GPEC, 1, // Software GPE Control + Offset(R_ACPI_IO_GPE0_STS_127_96), // 0x6C, General Purpose Event 0 Status [127:96] + , 19, + CPWS, 1, // CPU WAKE STATUS + Offset(R_ACPI_IO_GPE0_EN_127_96), // 0x7C, General Purpose Event 0 Enable [127:96] + , 19, + CPWE, 1 // CPU WAKE EN + } +*/ + // + // Define PCH TCOBASE I/O + // + /* + OperationRegion(TCBA, SystemIo, TCBS, 0x10) + Field(TCBA, ByteAcc, NoLock, Preserve) { + Offset(R_TCO_IO_TCO1_STS), // 0x04 + , 9, + CPSC, 1, // CPUSCI_STS + } +*/ + // + // PWRM register definitions + // + OperationRegion(PWMR, SystemMemory, 0xFE000000, 0x1E30) + Field(PWMR, DWordAcc, NoLock, Preserve) { + // + // IPC definitions + // + Offset(R_PMC_PWRM_IPC_CMD), // IPC Command (IPC_CMD) + CMDR, 32, // Command register. Includes: [7:0] Command, [8] MSI, [15:12] CMD_ID, [23:16] Size + Offset(R_PMC_PWRM_IPC_STS), // IPC Status (IPC_STS) + IBSY, 1, // [0] Ready/Busy (BUSY) + IERR, 1, // [1] Error (ERROR) + , 1, // [2] IRQ (IRQ) + , 1, // [3] Reserved + , 4, // [7:4] Command ID (CMD_ID) + , 8, // [15:8] Initiator ID (INIT_ID) + IERC, 8, // [23:16] Error Code (ERROR CODE) + , 8, // [31:24] Reserved + Offset(R_PMC_PWRM_IPC_WBUF0), // IPC Write Buffer (IPC_WBUF0) + IWB0, 32, // [31:0] Write Buffer (WBUF) + Offset(R_PMC_PWRM_IPC_WBUF1), // IPC Write Buffer (IPC_WBUF1) + IWB1, 32, // [31:0] Write Buffer (WBUF) + Offset(R_PMC_PWRM_IPC_WBUF2), // IPC Write Buffer (IPC_WBUF2) + IWB2, 32, // [31:0] Write Buffer (WBUF) + Offset(R_PMC_PWRM_IPC_WBUF3), // IPC Write Buffer (IPC_WBUF3) + IWB3, 32, // [31:0] Write Buffer (WBUF) + Offset(R_PMC_PWRM_IPC_RBUF0), // IPC Read Buffer (IPC_RBUF0) + IRB0, 32, // [31:0] Read Buffer (RBUF) + Offset(R_PMC_PWRM_IPC_RBUF1), // IPC Read Buffer (IPC_RBUF1) + IRB1, 32, // [31:0] Read Buffer (RBUF) + Offset(R_PMC_PWRM_IPC_RBUF2), // IPC Read Buffer (IPC_RBUF2) + IRB2, 32, // [31:0] Read Buffer (RBUF) + Offset(R_PMC_PWRM_IPC_RBUF3), // IPC Read Buffer (IPC_RBUF3) + IRB3, 32, // [31:0] Read Buffer (RBUF) + Offset(R_PMC_PWRM_MODPHY_PM_CFG5), + RAA0, 1, // BIT0 : PCIE A, Function 0 + RAA1, 1, // BIT1 : PCIE A, Function 1 + RAA2, 1, // BIT2 : PCIE A, Function 2 + RAA3, 1, // BIT3 : PCIE A, Function 3 + RPB0, 1, // BIT4 : PCIE B, Function 0 + RPB1, 1, // BIT5 : PCIE B, Function 1 + RPB2, 1, // BIT6 : PCIE B, Function 2 + RPB3, 1, // BIT7 : PCIE B, Function 3 + RPC0, 1, // BIT8 : PCIE C, Function 0 + RPC1, 1, // BIT9 : PCIE C, Function 1 + RPC2, 1, // BIT10 : PCIE C, Function 2 + RPC3, 1, // BIT11 : PCIE C, Function 3 + RSAT, 1, // BIT12 : SATA + RGBE, 1, // BIT13 : GBE + RXHC, 1, // BIT14 : XHCI + RXDC, 1, // BIT15 : XDCI + RUFS, 1, // BIT16 : UFS + RPD0, 1, // BIT17 : PCIE D, Function 0 + RPD1, 1, // BIT18 : PCIE D, Function 1 + RPD2, 1, // BIT18 : PCIE D, Function 2 + RPD3, 1, // BIT20 : PCIE D, Function 3 + RPE0, 1, // BIT21 : PCIE E, Function 0 + RPE1, 1, // BIT22 : PCIE E, Function 1 + RPE2, 1, // BIT23 : PCIE E, Function 2 + RPE3, 1, // BIT24 : PCIE E, Function 3 + Offset(R_PMC_PWRM_MODPHY_PM_CFG6), + APA0, 1, // BIT0 : PCIE A, Function 0 + APA1, 1, // BIT1 : PCIE A, Function 1 + APA2, 1, // BIT2 : PCIE A, Function 2 + APA3, 1, // BIT3 : PCIE A, Function 3 + APB0, 1, // BIT4 : PCIE B, Function 0 + APB1, 1, // BIT5 : PCIE B, Function 1 + APB2, 1, // BIT6 : PCIE B, Function 2 + APB3, 1, // BIT7 : PCIE B, Function 3 + APC0, 1, // BIT8 : PCIE C, Function 0 + APC1, 1, // BIT9 : PCIE C, Function 1 + APC2, 1, // BIT10 : PCIE C, Function 2 + APC3, 1, // BIT11 : PCIE C, Function 3 + ASAT, 1, // BIT12 : SATA + AGBE, 1, // BIT13 : GBE + AXHC, 1, // BIT14 : XHCI + AXDC, 1, // BIT15 : XDCI + AUFS, 1, // BIT16 : UFS + APD0, 1, // BIT17 : PCIE D, Function 0 + APD1, 1, // BIT18 : PCIE D, Function 1 + APD2, 1, // BIT18 : PCIE D, Function 2 + APD3, 1, // BIT20 : PCIE D, Function 3 + APE0, 1, // BIT21 : PCIE E, Function 0 + APE1, 1, // BIT22 : PCIE E, Function 1 + APE2, 1, // BIT23 : PCIE E, Function 2 + APE3, 1, // BIT24 : PCIE E, Function 3 + Offset(R_PMC_PWRM_WADT_AC), + // + // AdvancedFeaturesBegin + // + ACWA, 32, // Wake Alarm Device Timer: AC + DCWA, 32, // Wake Alarm Device Timer: DC + ACET, 32, // Wake Alarm Device Expired Timer: AC + DCET, 32, // Wake Alarm Device Expired Timer: DC + // + // AdvancedFeaturesEnd + // + Offset(R_PMC_PWRM_CFG4), + , 31, + CECE, 1, // PS_ON# de-assertion during SleepS0 enable + Offset(R_PMC_PWRM_1B1C), + , 22, + XSQD, 1, // 24MHz Crystal Shutdown Qualification Disable (XTALSDQDIS) + Offset(R_PMC_PWRM_1BD0), + , 31, + CPPM, 1, // BIT31 : 1 = PMC allows stalling of the backbone, 0 = PMC does not allow stalling of the backbone + Offset(R_PMC_PWRM_ST_PG_FDIS_PMC_1), + GBED, 1, // GBE_FDIS_PMC + Offset(R_PMC_PWRM_NST_PG_FDIS_1), + , 22, + SCFD, 1, // ST_FDIS_PMC (SATA) + } + + // + // CPPM Forced Alignment Enable (CPPMFAEN): + // 1 = PMC allows stalling of the backbone, enabling the CWB and blocking the DMI transmit arbiter and preventing CPU wakes (via PM_SYNC messages) when PCH idle (FAIDLEWAIT and FACSMEPGQDIS) and CPU is in the memory closed state. It ceases the stall when the maximum wake time point is met. + // 0 = PMC does not allow stalling of the backbone or enabling the CWB and blocking the DMI transmit arbiter. + // + Method(CFAE, 1, NotSerialized) { + If(DerefOf(Index(Arg0, 0))) { + //ADBG("CPPM Forced Alignment Disable") + Store(0, CPPM) + Return(Buffer() {0}) + } Else { + //ADBG("CPPM Forced Alignment Enable") + Store(1, CPPM) + Return(Buffer() {0}) + } + } + + // + // Is MODPHY power gating supported + // Checks if MODPHY power gating is supported on given SKU + // + // @retval 0 MODPHY power gating is not supported + // @retval 1 MODPHY power gating is supported + // + Method (IMPS) { + //If (LEqual (PCHS, PCH_S)) { + // Return(0) + //} Else { + Return(1) + //} + } +} -- To view, visit https://review.coreboot.org/c/coreboot/+/45301 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I7629e42a14120718ef7b727b76bf80143c226660 Gerrit-Change-Number: 45301 Gerrit-PatchSet: 1 Gerrit-Owner: Shreesh Chhabbi <shreesh.chhabbi(a)intel.com> Gerrit-Reviewer: Shreesh Chhabbi <shreesh.chhabbi(a)intel.corp-partner.google.com> Gerrit-MessageType: newchange

3 5

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit September 2020