coreboot-gerrit June 2020

coreboot-gerrit@coreboot.org

1 participants
2826 discussions

Change in coreboot[master]: mainboard/hp: Add ProBook 6360b
by Pablo Stebler (Code Review) 26 Aug '20

26 Aug '20

Pablo Stebler has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/42373 ) Change subject: mainboard/hp: Add ProBook 6360b ...................................................................... mainboard/hp: Add ProBook 6360b Working: * booting Arch Linux from SeaBIOS * PCIe/SATA/USB ports (see overridetree and early_init for lists) * LVDS, DisplayPort, VGA, 3.5 mm jacks, RJ-45 * keyboard, touchpad * C-States, S3 suspend Not working: * fan control only works after a reboot * screen brightness is at 100% on S3 resume (the previous setting can be recovered by pressing one of the brightness control key) * out of the 3 hotkeys, only the mute one works (and the led color is not updated) Untested: * internal speakers and microphone (defective on my machine) * FireWire, eSATA * docking station * TPM Signed-off-by: Pablo Stebler <pablo(a)stebler.xyz> Change-Id: I916583fad375f16e5b02388cbcad2e8a993e042f --- M src/mainboard/hp/snb_ivb_laptops/Kconfig M src/mainboard/hp/snb_ivb_laptops/Kconfig.name A src/mainboard/hp/snb_ivb_laptops/variants/6360b/board_info.txt A src/mainboard/hp/snb_ivb_laptops/variants/6360b/early_init.c A src/mainboard/hp/snb_ivb_laptops/variants/6360b/gma-mainboard.ads A src/mainboard/hp/snb_ivb_laptops/variants/6360b/gpio.c A src/mainboard/hp/snb_ivb_laptops/variants/6360b/hda_verb.c A src/mainboard/hp/snb_ivb_laptops/variants/6360b/overridetree.cb 8 files changed, 413 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/73/42373/1 diff --git a/src/mainboard/hp/snb_ivb_laptops/Kconfig b/src/mainboard/hp/snb_ivb_laptops/Kconfig index c4cd3a4..bda7656 100644 --- a/src/mainboard/hp/snb_ivb_laptops/Kconfig +++ b/src/mainboard/hp/snb_ivb_laptops/Kconfig @@ -22,6 +22,7 @@ string default "2570p" if BOARD_HP_2570P default "2760p" if BOARD_HP_2760P + default "6360b" if BOARD_HP_6360B default "8460p" if BOARD_HP_8460P default "8470p" if BOARD_HP_8470P default "8770w" if BOARD_HP_8770W @@ -32,6 +33,7 @@ string default "EliteBook 2570p" if BOARD_HP_2570P default "EliteBook 2760p" if BOARD_HP_2760P + default "ProBook 6360b" if BOARD_HP_6360B default "EliteBook 8460p" if BOARD_HP_8460P default "EliteBook 8470p" if BOARD_HP_8470P default "EliteBook 8770w" if BOARD_HP_8770W @@ -60,6 +62,7 @@ int default 2 if BOARD_HP_2570P default 1 if BOARD_HP_2760P + default 1 if BOARD_HP_6360B default 1 if BOARD_HP_8460P default 2 if BOARD_HP_8470P default 2 if BOARD_HP_8770W diff --git a/src/mainboard/hp/snb_ivb_laptops/Kconfig.name b/src/mainboard/hp/snb_ivb_laptops/Kconfig.name index c01555f..a84d897 100644 --- a/src/mainboard/hp/snb_ivb_laptops/Kconfig.name +++ b/src/mainboard/hp/snb_ivb_laptops/Kconfig.name @@ -22,6 +22,20 @@ select MAINBOARD_USES_IFD_GBE_REGION select SOUTHBRIDGE_INTEL_BD82X6X +config BOARD_HP_6360B + bool "ProBook 6360b" + + select BOARD_HP_SNB_IVB_LAPTOPS + select BOARD_ROMSIZE_KB_4096 + select GFX_GMA_PANEL_1_ON_LVDS + select INTEL_INT15 + select MAINBOARD_HAS_LIBGFXINIT + select MAINBOARD_HAS_LPC_TPM + select MAINBOARD_HAS_TPM1 + select MAINBOARD_USES_IFD_GBE_REGION + select SOUTHBRIDGE_INTEL_BD82X6X + select SUPERIO_SMSC_LPC47N217 + config BOARD_HP_8460P bool "EliteBook 8460p" diff --git a/src/mainboard/hp/snb_ivb_laptops/variants/6360b/board_info.txt b/src/mainboard/hp/snb_ivb_laptops/variants/6360b/board_info.txt new file mode 100644 index 0000000..53ac824 --- /dev/null +++ b/src/mainboard/hp/snb_ivb_laptops/variants/6360b/board_info.txt @@ -0,0 +1,7 @@ +Category: laptop +Board URL: https://support.hp.com/us-en/product/hp-probook-6360b-notebook-pc/5045581 +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: n +Release year: 2011 diff --git a/src/mainboard/hp/snb_ivb_laptops/variants/6360b/early_init.c b/src/mainboard/hp/snb_ivb_laptops/variants/6360b/early_init.c new file mode 100644 index 0000000..9524301 --- /dev/null +++ b/src/mainboard/hp/snb_ivb_laptops/variants/6360b/early_init.c @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <bootblock_common.h> +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <northbridge/intel/sandybridge/raminit_native.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <superio/smsc/lpc47n217/lpc47n217.h> +#include <ec/hp/kbc1126/ec.h> + +#define SERIAL_DEV PNP_DEV(0x4e, LPC47N217_SP1) + +const struct southbridge_usb_port mainboard_usb_ports[] = { + { 1, 1, 0 }, /* left front */ + { 1, 1, 0 }, /* left rear, debug */ + { 1, 1, 1 }, /* eSATA */ + { 1, 1, 1 }, /* webcam */ + { 1, 0, 2 }, + { 1, 0, 2 }, /* bluetooth */ + { 0, 0, 3 }, + { 0, 0, 3 }, + { 1, 1, 4 }, /* fingerprint reader */ + { 1, 1, 4 }, /* WWAN */ + { 1, 0, 5 }, /* right */ + { 1, 0, 5 }, + { 1, 0, 6 }, + { 1, 0, 6 }, +}; + +void bootblock_mainboard_early_init(void) +{ + lpc47n217_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + kbc1126_enter_conf(); + kbc1126_mailbox_init(); + kbc1126_kbc_init(); + kbc1126_ec_init(); + kbc1126_pm1_init(); + kbc1126_exit_conf(); +} + +void mainboard_get_spd(spd_raw_data *spd, bool id_only) +{ + read_spd(&spd[0], 0x50, id_only); + read_spd(&spd[2], 0x52, id_only); +} diff --git a/src/mainboard/hp/snb_ivb_laptops/variants/6360b/gma-mainboard.ads b/src/mainboard/hp/snb_ivb_laptops/variants/6360b/gma-mainboard.ads new file mode 100644 index 0000000..3df1e37 --- /dev/null +++ b/src/mainboard/hp/snb_ivb_laptops/variants/6360b/gma-mainboard.ads @@ -0,0 +1,22 @@ +-- SPDX-License-Identifier: GPL-2.0-or-later + +with HW.GFX.GMA; +with HW.GFX.GMA.Display_Probing; + +use HW.GFX.GMA; +use HW.GFX.GMA.Display_Probing; + +private package GMA.Mainboard is + + ports : constant Port_List := + (DP1, + DP2, + DP3, + HDMI1, + HDMI2, + HDMI3, + Analog, + LVDS, + others => Disabled); + +end GMA.Mainboard; diff --git a/src/mainboard/hp/snb_ivb_laptops/variants/6360b/gpio.c b/src/mainboard/hp/snb_ivb_laptops/variants/6360b/gpio.c new file mode 100644 index 0000000..c281dcd --- /dev/null +++ b/src/mainboard/hp/snb_ivb_laptops/variants/6360b/gpio.c @@ -0,0 +1,225 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <southbridge/intel/common/gpio.h> + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_GPIO, + .gpio3 = GPIO_MODE_GPIO, + .gpio4 = GPIO_MODE_GPIO, + .gpio5 = GPIO_MODE_NATIVE, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_GPIO, + .gpio11 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_NATIVE, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_NATIVE, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_GPIO, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_NATIVE, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_OUTPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_INPUT, + .gpio10 = GPIO_DIR_INPUT, + .gpio11 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio16 = GPIO_DIR_INPUT, + .gpio17 = GPIO_DIR_OUTPUT, + .gpio21 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_OUTPUT, + .gpio23 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_OUTPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio0 = GPIO_LEVEL_LOW, + .gpio11 = GPIO_LEVEL_LOW, + .gpio17 = GPIO_LEVEL_HIGH, + .gpio22 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_HIGH, + .gpio27 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_LOW, + .gpio29 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_reset = { + .gpio24 = GPIO_RESET_RSMRST, + .gpio30 = GPIO_RESET_RSMRST, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio1 = GPIO_INVERT, + .gpio3 = GPIO_INVERT, + .gpio6 = GPIO_INVERT, + .gpio7 = GPIO_INVERT, + .gpio10 = GPIO_INVERT, + .gpio13 = GPIO_INVERT, + .gpio14 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_NATIVE, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_GPIO, + .gpio45 = GPIO_MODE_NATIVE, + .gpio46 = GPIO_MODE_GPIO, + .gpio47 = GPIO_MODE_NATIVE, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_GPIO, + .gpio51 = GPIO_MODE_GPIO, + .gpio52 = GPIO_MODE_GPIO, + .gpio53 = GPIO_MODE_GPIO, + .gpio54 = GPIO_MODE_GPIO, + .gpio55 = GPIO_MODE_GPIO, + .gpio56 = GPIO_MODE_NATIVE, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_GPIO, + .gpio61 = GPIO_MODE_GPIO, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_INPUT, + .gpio35 = GPIO_DIR_OUTPUT, + .gpio36 = GPIO_DIR_OUTPUT, + .gpio37 = GPIO_DIR_OUTPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio44 = GPIO_DIR_INPUT, + .gpio46 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_OUTPUT, + .gpio50 = GPIO_DIR_INPUT, + .gpio51 = GPIO_DIR_INPUT, + .gpio52 = GPIO_DIR_INPUT, + .gpio53 = GPIO_DIR_OUTPUT, + .gpio54 = GPIO_DIR_INPUT, + .gpio55 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_OUTPUT, + .gpio60 = GPIO_DIR_OUTPUT, + .gpio61 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio33 = GPIO_LEVEL_LOW, + .gpio35 = GPIO_LEVEL_LOW, + .gpio36 = GPIO_LEVEL_LOW, + .gpio37 = GPIO_LEVEL_LOW, + .gpio49 = GPIO_LEVEL_LOW, + .gpio53 = GPIO_LEVEL_HIGH, + .gpio57 = GPIO_LEVEL_HIGH, + .gpio60 = GPIO_LEVEL_HIGH, + .gpio61 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_reset = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NATIVE, + .gpio65 = GPIO_MODE_NATIVE, + .gpio66 = GPIO_MODE_NATIVE, + .gpio67 = GPIO_MODE_NATIVE, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_GPIO, + .gpio71 = GPIO_MODE_GPIO, + .gpio72 = GPIO_MODE_GPIO, + .gpio73 = GPIO_MODE_GPIO, + .gpio74 = GPIO_MODE_GPIO, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio68 = GPIO_DIR_OUTPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio70 = GPIO_DIR_OUTPUT, + .gpio71 = GPIO_DIR_OUTPUT, + .gpio72 = GPIO_DIR_OUTPUT, + .gpio73 = GPIO_DIR_OUTPUT, + .gpio74 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { + .gpio68 = GPIO_LEVEL_HIGH, + .gpio70 = GPIO_LEVEL_HIGH, + .gpio71 = GPIO_LEVEL_HIGH, + .gpio72 = GPIO_LEVEL_LOW, + .gpio73 = GPIO_LEVEL_HIGH, + .gpio74 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_reset = { +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; diff --git a/src/mainboard/hp/snb_ivb_laptops/variants/6360b/hda_verb.c b/src/mainboard/hp/snb_ivb_laptops/variants/6360b/hda_verb.c new file mode 100644 index 0000000..40de8bc --- /dev/null +++ b/src/mainboard/hp/snb_ivb_laptops/variants/6360b/hda_verb.c @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + 0x111d7605, /* Codec Vendor / Device ID: IDT */ + 0x103c1620, /* Subsystem ID */ + 11, /* Number of 4 dword sets */ + AZALIA_SUBVENDOR(0, 0x103c1620), + AZALIA_PIN_CFG(0, 0x0a, 0x40f000f0), + AZALIA_PIN_CFG(0, 0x0b, 0x0421401f), + AZALIA_PIN_CFG(0, 0x0c, 0x04a11020), + AZALIA_PIN_CFG(0, 0x0d, 0x90170110), + AZALIA_PIN_CFG(0, 0x0e, 0x40f000f0), + AZALIA_PIN_CFG(0, 0x0f, 0x40f000f0), + AZALIA_PIN_CFG(0, 0x10, 0x40f000f0), + AZALIA_PIN_CFG(0, 0x11, 0x90a60130), + AZALIA_PIN_CFG(0, 0x1f, 0x40f000f0), + AZALIA_PIN_CFG(0, 0x20, 0x40f000f0), + + 0x11c11040, /* Codec Vendor / Device ID: LSI */ + 0x103c3066, /* Subsystem ID */ + 1, /* Number of 4 dword sets */ + AZALIA_SUBVENDOR(1, 0x103c3066), + + 0x80862805, /* Codec Vendor / Device ID: Intel */ + 0x80860101, /* Subsystem ID */ + 4, /* Number of 4 dword sets */ + AZALIA_SUBVENDOR(3, 0x80860101), + AZALIA_PIN_CFG(3, 0x05, 0x18560010), + AZALIA_PIN_CFG(3, 0x06, 0x18560020), + AZALIA_PIN_CFG(3, 0x07, 0x18560030), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/hp/snb_ivb_laptops/variants/6360b/overridetree.cb b/src/mainboard/hp/snb_ivb_laptops/variants/6360b/overridetree.cb new file mode 100644 index 0000000..6b0378e --- /dev/null +++ b/src/mainboard/hp/snb_ivb_laptops/variants/6360b/overridetree.cb @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-or-later + +chip northbridge/intel/sandybridge + register "gpu_cpu_backlight" = "0x0000014a" + + device domain 0 on + subsystemid 0x103c 0x161c inherit + + device pci 01.0 off end # PEG + device pci 02.0 on end # iGPU + + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "gen1_dec" = "0x007c0201" + register "gen2_dec" = "0x000c0101" + register "gen3_dec" = "0x00fcfe01" + register "gen4_dec" = "0x000402e9" + register "gpi6_routing" = "2" + register "pcie_hotplug_map" = "{ 0, 1, 1, 0, 0, 0, 0, 0 }" + # HDD(0), ODD(1) + register "sata_port_map" = "0x3b" + + device pci 1c.0 on end # PCIe Port #1 + device pci 1c.1 on # PCIe Port #2, ExpressCard + smbios_slot_desc "SlotTypePcmcia" "SlotLengthShort" + "ExpressCard Slot" "SlotDataBusWidth1X" + end + device pci 1c.2 on end # PCIe Port #3, SD/MMC and FireWire + device pci 1c.3 on # PCIe Port #4, WLAN + smbios_slot_desc "SlotTypePciExpressMini52pinWithoutBSKO" + "SlotLengthShort" "Mini PCIe" "SlotDataBusWidth1X" + end + device pci 1c.4 off end # PCIe Port #5 + device pci 1c.5 off end # PCIe Port #6 + device pci 1c.6 on end # PCIe Port #7, WWAN + device pci 1c.7 off end # PCIe Port #8 + device pci 1f.0 on + chip ec/hp/kbc1126 + register "ec_data_port" = "0x60" + register "ec_cmd_port" = "0x64" + register "ec_ctrl_reg" = "0xca" + register "ec_fan_ctrl_value" = "0x6e" + device pnp ff.1 off end + end + chip superio/smsc/lpc47n217 + device pnp 4e.3 on # Parallel + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 4e.4 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.5 off end # COM2 + end + chip drivers/pc80/tpm + device pnp 0c31.0 on end + end + end + end + end +end -- To view, visit https://review.coreboot.org/c/coreboot/+/42373 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I916583fad375f16e5b02388cbcad2e8a993e042f Gerrit-Change-Number: 42373 Gerrit-PatchSet: 1 Gerrit-Owner: Pablo Stebler <pablo(a)stebler.xyz> Gerrit-MessageType: newchange

5 29

Change in coreboot[master]: sb/intel/bd82x6x: Align mkhi_end_of_post() functions
by Angel Pons (Code Review) 25 Aug '20

25 Aug '20

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/42011 ) Change subject: sb/intel/bd82x6x: Align mkhi_end_of_post() functions ...................................................................... sb/intel/bd82x6x: Align mkhi_end_of_post() functions Looks like we don't handle the returned value in ME7. It should not make things worse if we now print it, though. Also, since __FUNCTION__ is specific to GCC, replace it with __func__ to make checkpatch happy. Change-Id: Ic553d8129e5a37be9dca9ab970fc0fdefb874d84 Signed-off-by: Angel Pons <th3fanbus(a)gmail.com> --- M src/southbridge/intel/bd82x6x/me.c M src/southbridge/intel/bd82x6x/me_8.x.c 2 files changed, 32 insertions(+), 29 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/11/42011/1 diff --git a/src/southbridge/intel/bd82x6x/me.c b/src/southbridge/intel/bd82x6x/me.c index 68e6dbf..6209270 100644 --- a/src/southbridge/intel/bd82x6x/me.c +++ b/src/southbridge/intel/bd82x6x/me.c @@ -341,13 +341,16 @@ .length = sizeof(mkhi), }; + u32 eop_ack; + /* Send request and wait for response */ - if (mei_sendrecv(&mei, &mkhi, NULL, NULL, 0) < 0) { + printk(BIOS_NOTICE, "ME: %s\n", __func__); + if (mei_sendrecv(&mei, &mkhi, NULL, &eop_ack, sizeof(eop_ack)) < 0) { printk(BIOS_ERR, "ME: END OF POST message failed\n"); return -1; } - printk(BIOS_INFO, "ME: END OF POST message successful\n"); + printk(BIOS_INFO, "ME: END OF POST message successful (%d)\n", eop_ack); return 0; } diff --git a/src/southbridge/intel/bd82x6x/me_8.x.c b/src/southbridge/intel/bd82x6x/me_8.x.c index e1fdd5d..54afae8 100644 --- a/src/southbridge/intel/bd82x6x/me_8.x.c +++ b/src/southbridge/intel/bd82x6x/me_8.x.c @@ -327,6 +327,33 @@ return 0; } +/* Send END OF POST message to the ME */ +static int __unused mkhi_end_of_post(void) +{ + struct mkhi_header mkhi = { + .group_id = MKHI_GROUP_ID_GEN, + .command = MKHI_END_OF_POST, + }; + struct mei_header mei = { + .is_complete = 1, + .host_address = MEI_HOST_ADDRESS, + .client_address = MEI_ADDRESS_MKHI, + .length = sizeof(mkhi), + }; + + u32 eop_ack; + + /* Send request and wait for response */ + printk(BIOS_NOTICE, "ME: %s\n", __func__); + if (mei_sendrecv(&mei, &mkhi, NULL, &eop_ack, sizeof(eop_ack)) < 0) { + printk(BIOS_ERR, "ME: END OF POST message failed\n"); + return -1; + } + + printk(BIOS_INFO, "ME: END OF POST message successful (%d)\n", eop_ack); + return 0; +} + static inline void print_cap(const char *name, int state) { printk(BIOS_DEBUG, "ME Capability: %-41s : %sabled\n", @@ -398,33 +425,6 @@ print_cap("Wireless LAN (WLAN)", cap->wlan); } -/* Send END OF POST message to the ME */ -static int __unused mkhi_end_of_post(void) -{ - struct mkhi_header mkhi = { - .group_id = MKHI_GROUP_ID_GEN, - .command = MKHI_END_OF_POST, - }; - struct mei_header mei = { - .is_complete = 1, - .host_address = MEI_HOST_ADDRESS, - .client_address = MEI_ADDRESS_MKHI, - .length = sizeof(mkhi), - }; - - u32 eop_ack; - - /* Send request and wait for response */ - printk(BIOS_NOTICE, "ME: %s\n", __FUNCTION__); - if (mei_sendrecv(&mei, &mkhi, NULL, &eop_ack, sizeof(eop_ack)) < 0) { - printk(BIOS_ERR, "ME: END OF POST message failed\n"); - return -1; - } - - printk(BIOS_INFO, "ME: END OF POST message successful (%d)\n", eop_ack); - return 0; -} - #ifdef __SIMPLE_DEVICE__ void intel_me8_finalize_smm(void) -- To view, visit https://review.coreboot.org/c/coreboot/+/42011 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ic553d8129e5a37be9dca9ab970fc0fdefb874d84 Gerrit-Change-Number: 42011 Gerrit-PatchSet: 1 Gerrit-Owner: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newchange

3 11

Change in coreboot[master]: soc/intel/elkhartlake: Add Elkhart Lake SoC support
by Lean Sheng Tan (Code Review) 25 Aug '20

25 Aug '20

Lean Sheng Tan has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/40851 ) Change subject: soc/intel/elkhartlake: Add Elkhart Lake SoC support ...................................................................... soc/intel/elkhartlake: Add Elkhart Lake SoC support This is a copy patch from Jasper Lake SoC code. The only changes done on top of copy is changing below config: 1. SOC_INTEL_JASPERLAKE -> SOC_INTEL_ELKHARTLAKE The follow up patches for EHL will be checked in, as the difference between EHL and JSL are listed below: -> GPIO: GPIO communities have their own differences. This requires conditional checks in gpio.asl, gpio.c, gpio*.h, pmc.h and gpio.asl -> PCI IRQs: Set up differently for JSL and EHL -> PCIe: Number of Root ports differ. -> USB: Number of USB port are different for JSL and EHL. -> Memory configuration parameters are different for JSL and EHL -> FSP parameters for JSL and EHL are different. Signed-off-by: Lean Sheng Tan <lean.sheng.tan(a)intel.com> Change-Id: I5d23664d3d773526d76d48fbab70c1aacc6fe7b9 --- A src/soc/intel/elkhartlake/Kconfig A src/soc/intel/elkhartlake/Makefile.inc A src/soc/intel/elkhartlake/acpi.c A src/soc/intel/elkhartlake/acpi/camera_clock_ctl.asl A src/soc/intel/elkhartlake/acpi/gpio.asl A src/soc/intel/elkhartlake/acpi/gpio_op.asl A src/soc/intel/elkhartlake/acpi/ipu.asl A src/soc/intel/elkhartlake/acpi/ish.asl A src/soc/intel/elkhartlake/acpi/pch_glan.asl A src/soc/intel/elkhartlake/acpi/pch_hda.asl A src/soc/intel/elkhartlake/acpi/pci_irqs.asl A src/soc/intel/elkhartlake/acpi/pcie.asl A src/soc/intel/elkhartlake/acpi/platform.asl A src/soc/intel/elkhartlake/acpi/pmc.asl A src/soc/intel/elkhartlake/acpi/scs.asl A src/soc/intel/elkhartlake/acpi/serialio.asl A src/soc/intel/elkhartlake/acpi/smbus.asl A src/soc/intel/elkhartlake/acpi/southbridge.asl A src/soc/intel/elkhartlake/acpi/xhci.asl A src/soc/intel/elkhartlake/bootblock/bootblock.c A src/soc/intel/elkhartlake/bootblock/cpu.c A src/soc/intel/elkhartlake/bootblock/pch.c A src/soc/intel/elkhartlake/bootblock/report_platform.c A src/soc/intel/elkhartlake/chip.c A src/soc/intel/elkhartlake/chip.h A src/soc/intel/elkhartlake/cpu.c A src/soc/intel/elkhartlake/elog.c A src/soc/intel/elkhartlake/espi.c A src/soc/intel/elkhartlake/finalize.c A src/soc/intel/elkhartlake/fsp_params.c A src/soc/intel/elkhartlake/gpio.c A src/soc/intel/elkhartlake/graphics.c A src/soc/intel/elkhartlake/gspi.c A src/soc/intel/elkhartlake/i2c.c A src/soc/intel/elkhartlake/include/soc/bootblock.h A src/soc/intel/elkhartlake/include/soc/cpu.h A src/soc/intel/elkhartlake/include/soc/espi.h A src/soc/intel/elkhartlake/include/soc/gpe.h A src/soc/intel/elkhartlake/include/soc/gpio.h A src/soc/intel/elkhartlake/include/soc/gpio_defs.h A src/soc/intel/elkhartlake/include/soc/gpio_soc_defs.h A src/soc/intel/elkhartlake/include/soc/iomap.h A src/soc/intel/elkhartlake/include/soc/irq.h A src/soc/intel/elkhartlake/include/soc/itss.h A src/soc/intel/elkhartlake/include/soc/me.h A src/soc/intel/elkhartlake/include/soc/meminit.h A src/soc/intel/elkhartlake/include/soc/msr.h A src/soc/intel/elkhartlake/include/soc/nvs.h A src/soc/intel/elkhartlake/include/soc/p2sb.h A src/soc/intel/elkhartlake/include/soc/pch.h A src/soc/intel/elkhartlake/include/soc/pci_devs.h A src/soc/intel/elkhartlake/include/soc/pcr_ids.h A src/soc/intel/elkhartlake/include/soc/pm.h A src/soc/intel/elkhartlake/include/soc/pmc.h A src/soc/intel/elkhartlake/include/soc/ramstage.h A src/soc/intel/elkhartlake/include/soc/romstage.h A src/soc/intel/elkhartlake/include/soc/serialio.h A src/soc/intel/elkhartlake/include/soc/smbus.h A src/soc/intel/elkhartlake/include/soc/soc_chip.h A src/soc/intel/elkhartlake/include/soc/systemagent.h A src/soc/intel/elkhartlake/include/soc/usb.h A src/soc/intel/elkhartlake/lockdown.c A src/soc/intel/elkhartlake/meminit.c A src/soc/intel/elkhartlake/p2sb.c A src/soc/intel/elkhartlake/pmc.c A src/soc/intel/elkhartlake/pmutil.c A src/soc/intel/elkhartlake/reset.c A src/soc/intel/elkhartlake/romstage/Makefile.inc A src/soc/intel/elkhartlake/romstage/fsp_params.c A src/soc/intel/elkhartlake/romstage/pch.c A src/soc/intel/elkhartlake/romstage/romstage.c A src/soc/intel/elkhartlake/romstage/systemagent.c A src/soc/intel/elkhartlake/sd.c A src/soc/intel/elkhartlake/smihandler.c A src/soc/intel/elkhartlake/smmrelocate.c A src/soc/intel/elkhartlake/spi.c A src/soc/intel/elkhartlake/systemagent.c A src/soc/intel/elkhartlake/uart.c 78 files changed, 7,371 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/51/40851/1 diff --git a/src/soc/intel/elkhartlake/Kconfig b/src/soc/intel/elkhartlake/Kconfig new file mode 100644 index 0000000..07578b1 --- /dev/null +++ b/src/soc/intel/elkhartlake/Kconfig @@ -0,0 +1,208 @@ +config SOC_INTEL_ELKHARTLAKE + bool + help + Intel Elkhartlake support + +if SOC_INTEL_ELKHARTLAKE + +config CPU_SPECIFIC_OPTIONS + def_bool y + select ACPI_INTEL_HARDWARE_SLEEP_VALUES + select ARCH_BOOTBLOCK_X86_32 + select ARCH_RAMSTAGE_X86_32 + select ARCH_ROMSTAGE_X86_32 + select ARCH_VERSTAGE_X86_32 + select BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY if BOOT_DEVICE_SPI_FLASH + select BOOT_DEVICE_SUPPORTS_WRITES + select CACHE_MRC_SETTINGS + select COMMON_FADT + select CPU_INTEL_FIRMWARE_INTERFACE_TABLE + select FSP_M_XIP + select GENERIC_GPIO_LIB + select HAVE_FSP_GOP + select INTEL_DESCRIPTOR_MODE_CAPABLE + select HAVE_SMI_HANDLER + select IDT_IN_EVERY_STAGE + select INTEL_CAR_NEM #TODO - Enable INTEL_CAR_NEM_ENHANCED + select INTEL_GMA_ACPI + select INTEL_GMA_ADD_VBT if RUN_FSP_GOP + select IOAPIC + select MRC_SETTINGS_PROTECT + select PARALLEL_MP + select PARALLEL_MP_AP_WORK + select MICROCODE_BLOB_UNDISCLOSED + select PLATFORM_USES_FSP2_1 + select REG_SCRIPT + select SMP + select SOC_AHCI_PORT_IMPLEMENTED_INVERT + select PMC_GLOBAL_RESET_ENABLE_LOCK + select CPU_INTEL_COMMON_SMM + select SOC_INTEL_COMMON + select SOC_INTEL_COMMON_ACPI_WAKE_SOURCE + select SOC_INTEL_COMMON_BLOCK + select SOC_INTEL_COMMON_BLOCK_ACPI + select SOC_INTEL_COMMON_BLOCK_CHIP_CONFIG + select SOC_INTEL_COMMON_BLOCK_CPU + select SOC_INTEL_COMMON_BLOCK_CPU_MPINIT + select SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT + select SOC_INTEL_COMMON_BLOCK_GSPI_VERSION_2 + select SOC_INTEL_COMMON_BLOCK_HDA + select SOC_INTEL_COMMON_BLOCK_SA + select SOC_INTEL_COMMON_BLOCK_SCS + select SOC_INTEL_COMMON_BLOCK_SMM + select SOC_INTEL_COMMON_BLOCK_SMM_IO_TRAP + select SOC_INTEL_COMMON_PCH_BASE + select SOC_INTEL_COMMON_RESET + select SOC_INTEL_COMMON_BLOCK_CAR + select SSE2 + select SUPPORT_CPU_UCODE_IN_CBFS + select TSC_MONOTONIC_TIMER + select UDELAY_TSC + select UDK_2017_BINDING + select DISPLAY_FSP_VERSION_INFO + select HECI_DISABLE_USING_SMM + +config DCACHE_RAM_BASE + default 0xfef00000 + +config DCACHE_RAM_SIZE + default 0x80000 + help + The size of the cache-as-ram region required during bootblock + and/or romstage. + +config DCACHE_BSP_STACK_SIZE + hex + default 0x30400 + help + The amount of anticipated stack usage in CAR by bootblock and + other stages. In the case of FSP_USES_CB_STACK default value + will be sum of FSP-M stack requirement(192 KiB) and CB romstage + stack requirement(~1KiB). + +config FSP_TEMP_RAM_SIZE + hex + default 0x20000 + help + The amount of anticipated heap usage in CAR by FSP. + Refer to Platform FSP integration guide document to know + the exact FSP requirement for Heap setup. + +config IFD_CHIPSET + string + default "jsl" + +config IED_REGION_SIZE + hex + default 0x400000 + +config HEAP_SIZE + hex + default 0x8000 + +config MAX_ROOT_PORTS + int + default 8 + +config MAX_PCIE_CLOCKS + int + default 6 + +config SMM_TSEG_SIZE + hex + default 0x800000 + +config SMM_RESERVED_SIZE + hex + default 0x200000 + +config PCR_BASE_ADDRESS + hex + default 0xfd000000 + help + This option allows you to select MMIO Base Address of sideband bus. + +config MMCONF_BASE_ADDRESS + hex + default 0xc0000000 + +config CPU_BCLK_MHZ + int + default 100 + +config SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ + int + default 120 + +config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ + int + default 133 + +config SOC_INTEL_COMMON_BLOCK_GSPI_MAX + int + default 3 + +config SOC_INTEL_I2C_DEV_MAX + int + default 6 + +config SOC_INTEL_UART_DEV_MAX + int + default 3 + +config CONSOLE_UART_BASE_ADDRESS + hex + default 0xfe032000 + depends on INTEL_LPSS_UART_FOR_CONSOLE + +# Clock divider parameters for 115200 baud rate +# Baudrate = (UART source clcok * M) /(N *16) +# JSL UART source clock: 100MHz +config SOC_INTEL_COMMON_LPSS_UART_CLK_M_VAL + hex + default 0x30 + +config SOC_INTEL_COMMON_LPSS_UART_CLK_N_VAL + hex + default 0xc35 + +config CHROMEOS + select CHROMEOS_RAMOOPS_DYNAMIC + +config VBOOT + select VBOOT_SEPARATE_VERSTAGE + select VBOOT_MUST_REQUEST_DISPLAY + select VBOOT_STARTS_IN_BOOTBLOCK + select VBOOT_VBNV_CMOS + select VBOOT_VBNV_CMOS_BACKUP_TO_FLASH + +config C_ENV_BOOTBLOCK_SIZE + hex + default 0xC000 + +config CBFS_SIZE + hex + default 0x200000 + +config FSP_HEADER_PATH + default "src/vendorcode/intel/fsp/fsp2_0/jasperlake/" + +config FSP_FD_PATH + default "3rdparty/fsp/JasperLakeFspBinPkg/Fsp.fd" + +config SOC_INTEL_ELKHARTLAKE_DEBUG_CONSENT + int "Debug Consent for EHL" + # USB DBC is more common for developers so make this default to 3 if + # SOC_INTEL_DEBUG_CONSENT=y + default 3 if SOC_INTEL_DEBUG_CONSENT + default 0 + help + This is to control debug interface on SOC. + Setting non-zero value will allow to use DBC or DCI to debug SOC. + PlatformDebugConsent in FspmUpd.h has the details. + + Desired platform debug type are + 0:Disabled, 1:Enabled (DCI OOB+[DbC]), 2:Enabled (DCI OOB), + 3:Enabled (USB3 DbC), 4:Enabled (XDP/MIPI60), 5:Enabled (USB2 DbC), + 6:Enable (2-wire DCI OOB), 7:Manual +endif diff --git a/src/soc/intel/elkhartlake/Makefile.inc b/src/soc/intel/elkhartlake/Makefile.inc new file mode 100644 index 0000000..58734c1 --- /dev/null +++ b/src/soc/intel/elkhartlake/Makefile.inc @@ -0,0 +1,60 @@ +ifeq ($(CONFIG_SOC_INTEL_ELKHARTLAKE),y) + +subdirs-y += romstage +subdirs-y += ../../../cpu/intel/microcode +subdirs-y += ../../../cpu/intel/turbo +subdirs-y += ../../../cpu/x86/lapic +subdirs-y += ../../../cpu/x86/mtrr +subdirs-y += ../../../cpu/x86/smm +subdirs-y += ../../../cpu/x86/tsc + +# all (bootblock, verstage, romstage, postcar, ramstage) +all-y += gspi.c +all-y += i2c.c +all-y += pmutil.c +all-y += spi.c +all-y += uart.c + +bootblock-y += bootblock/bootblock.c +bootblock-y += bootblock/cpu.c +bootblock-y += bootblock/pch.c +bootblock-y += bootblock/report_platform.c +bootblock-y += espi.c +bootblock-y += gpio.c +bootblock-y += p2sb.c + +romstage-y += espi.c +romstage-y += gpio.c +romstage-y += meminit.c +romstage-y += reset.c + +ramstage-y += acpi.c +ramstage-y += chip.c +ramstage-y += cpu.c +ramstage-y += elog.c +ramstage-y += espi.c +ramstage-y += finalize.c +ramstage-y += fsp_params.c +ramstage-y += gpio.c +ramstage-y += graphics.c +ramstage-y += lockdown.c +ramstage-y += p2sb.c +ramstage-y += pmc.c +ramstage-y += reset.c +ramstage-y += smmrelocate.c +ramstage-y += systemagent.c +ramstage-y += sd.c + +smm-y += gpio.c +smm-y += p2sb.c +smm-y += pmc.c +smm-y += pmutil.c +smm-y += smihandler.c +smm-y += uart.c + +verstage-y += gpio.c + +CPPFLAGS_common += -I$(src)/soc/intel/jasperlake +CPPFLAGS_common += -I$(src)/soc/intel/jasperlake/include + +endif diff --git a/src/soc/intel/elkhartlake/acpi.c b/src/soc/intel/elkhartlake/acpi.c new file mode 100644 index 0000000..4acd8a6 --- /dev/null +++ b/src/soc/intel/elkhartlake/acpi.c @@ -0,0 +1,332 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <device/mmio.h> +#include <arch/smp/mpspec.h> +#include <cbmem.h> +#include <console/console.h> +#include <device/pci_ops.h> +#include <ec/google/chromeec/ec.h> +#include <intelblocks/cpulib.h> +#include <intelblocks/pmclib.h> +#include <intelblocks/acpi.h> +#include <soc/cpu.h> +#include <soc/iomap.h> +#include <soc/nvs.h> +#include <soc/pci_devs.h> +#include <soc/pm.h> +#include <soc/soc_chip.h> +#include <soc/systemagent.h> +#include <string.h> +#include <wrdd.h> + +/* + * List of supported C-states in this processor. + */ +enum { + C_STATE_C0, /* 0 */ + C_STATE_C1, /* 1 */ + C_STATE_C1E, /* 2 */ + C_STATE_C6_SHORT_LAT, /* 3 */ + C_STATE_C6_LONG_LAT, /* 4 */ + C_STATE_C7_SHORT_LAT, /* 5 */ + C_STATE_C7_LONG_LAT, /* 6 */ + C_STATE_C7S_SHORT_LAT, /* 7 */ + C_STATE_C7S_LONG_LAT, /* 8 */ + C_STATE_C8, /* 9 */ + C_STATE_C9, /* 10 */ + C_STATE_C10, /* 11 */ + NUM_C_STATES +}; + +#define MWAIT_RES(state, sub_state) \ + { \ + .addrl = (((state) << 4) | (sub_state)), \ + .space_id = ACPI_ADDRESS_SPACE_FIXED, \ + .bit_width = ACPI_FFIXEDHW_VENDOR_INTEL, \ + .bit_offset = ACPI_FFIXEDHW_CLASS_MWAIT, \ + .access_size = ACPI_FFIXEDHW_FLAG_HW_COORD, \ + } + +static const acpi_cstate_t cstate_map[NUM_C_STATES] = { + [C_STATE_C0] = {}, + [C_STATE_C1] = { + .latency = 0, + .power = C1_POWER, + .resource = MWAIT_RES(0, 0), + }, + [C_STATE_C1E] = { + .latency = 0, + .power = C1_POWER, + .resource = MWAIT_RES(0, 1), + }, + [C_STATE_C6_SHORT_LAT] = { + .latency = C_STATE_LATENCY_FROM_LAT_REG(0), + .power = C6_POWER, + .resource = MWAIT_RES(2, 0), + }, + [C_STATE_C6_LONG_LAT] = { + .latency = C_STATE_LATENCY_FROM_LAT_REG(0), + .power = C6_POWER, + .resource = MWAIT_RES(2, 1), + }, + [C_STATE_C7_SHORT_LAT] = { + .latency = C_STATE_LATENCY_FROM_LAT_REG(0), + .power = C7_POWER, + .resource = MWAIT_RES(3, 0), + }, + [C_STATE_C7_LONG_LAT] = { + .latency = C_STATE_LATENCY_FROM_LAT_REG(0), + .power = C7_POWER, + .resource = MWAIT_RES(3, 1), + }, + [C_STATE_C7S_SHORT_LAT] = { + .latency = C_STATE_LATENCY_FROM_LAT_REG(0), + .power = C7_POWER, + .resource = MWAIT_RES(3, 2), + }, + [C_STATE_C7S_LONG_LAT] = { + .latency = C_STATE_LATENCY_FROM_LAT_REG(0), + .power = C7_POWER, + .resource = MWAIT_RES(3, 3), + }, + [C_STATE_C8] = { + .latency = C_STATE_LATENCY_FROM_LAT_REG(0), + .power = C8_POWER, + .resource = MWAIT_RES(4, 0), + }, + [C_STATE_C9] = { + .latency = C_STATE_LATENCY_FROM_LAT_REG(0), + .power = C9_POWER, + .resource = MWAIT_RES(5, 0), + }, + [C_STATE_C10] = { + .latency = C_STATE_LATENCY_FROM_LAT_REG(0), + .power = C10_POWER, + .resource = MWAIT_RES(6, 0), + }, +}; + +static int cstate_set_non_s0ix[] = { + C_STATE_C1E, + C_STATE_C6_LONG_LAT, + C_STATE_C7S_LONG_LAT +}; + +static int cstate_set_s0ix[] = { + C_STATE_C1E, + C_STATE_C7S_LONG_LAT, + C_STATE_C10 +}; + +acpi_cstate_t *soc_get_cstate_map(size_t *entries) +{ + static acpi_cstate_t map[MAX(ARRAY_SIZE(cstate_set_s0ix), + ARRAY_SIZE(cstate_set_non_s0ix))]; + int *set; + int i; + + config_t *config = config_of_soc(); + + int is_s0ix_enable = config->s0ix_enable; + + if (is_s0ix_enable) { + *entries = ARRAY_SIZE(cstate_set_s0ix); + set = cstate_set_s0ix; + } else { + *entries = ARRAY_SIZE(cstate_set_non_s0ix); + set = cstate_set_non_s0ix; + } + + for (i = 0; i < *entries; i++) { + memcpy(&map[i], &cstate_map[set[i]], sizeof(acpi_cstate_t)); + map[i].ctype = i + 1; + } + return map; +} + +void soc_power_states_generation(int core_id, int cores_per_package) +{ + config_t *config = config_of_soc(); + + if (config->eist_enable) + /* Generate P-state tables */ + generate_p_state_entries(core_id, cores_per_package); +} + +void soc_fill_fadt(acpi_fadt_t *fadt) +{ + const uint16_t pmbase = ACPI_BASE_ADDRESS; + + config_t *config = config_of_soc(); + + fadt->pm_tmr_blk = pmbase + PM1_TMR; + fadt->pm_tmr_len = 4; + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = fadt->pm_tmr_len * 8; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.access_size = 0; + fadt->x_pm_tmr_blk.addrl = pmbase + PM1_TMR; + fadt->x_pm_tmr_blk.addrh = 0x0; + + if (config->s0ix_enable) + fadt->flags |= ACPI_FADT_LOW_PWR_IDLE_S0; +} + +uint32_t soc_read_sci_irq_select(void) +{ + uintptr_t pmc_bar = soc_read_pmc_base(); + return read32((void *)pmc_bar + IRQ_REG); +} + +static unsigned long soc_fill_dmar(unsigned long current) +{ + const struct device *const igfx_dev = pcidev_path_on_root(SA_DEVFN_IGD); + uint64_t gfxvtbar = MCHBAR64(GFXVTBAR) & VTBAR_MASK; + bool gfxvten = MCHBAR32(GFXVTBAR) & VTBAR_ENABLED; + + if (igfx_dev && igfx_dev->enabled && gfxvtbar && gfxvten) { + unsigned long tmp = current; + + current += acpi_create_dmar_drhd(current, 0, 0, gfxvtbar); + current += acpi_create_dmar_ds_pci(current, 0, 2, 0); + + acpi_dmar_drhd_fixup(tmp, current); + } + + const struct device *const ipu_dev = pcidev_path_on_root(SA_DEVFN_IPU); + uint64_t ipuvtbar = MCHBAR64(IPUVTBAR) & VTBAR_MASK; + bool ipuvten = MCHBAR32(IPUVTBAR) & VTBAR_ENABLED; + + if (ipu_dev && ipu_dev->enabled && ipuvtbar && ipuvten) { + unsigned long tmp = current; + + current += acpi_create_dmar_drhd(current, 0, 0, ipuvtbar); + current += acpi_create_dmar_ds_pci(current, 0, 5, 0); + + acpi_dmar_drhd_fixup(tmp, current); + } + + uint64_t vtvc0bar = MCHBAR64(VTVC0BAR) & VTBAR_MASK; + bool vtvc0en = MCHBAR32(VTVC0BAR) & VTBAR_ENABLED; + + if (vtvc0bar && vtvc0en) { + const unsigned long tmp = current; + + current += acpi_create_dmar_drhd(current, + DRHD_INCLUDE_PCI_ALL, 0, vtvc0bar); + current += acpi_create_dmar_ds_ioapic(current, + 2, V_P2SB_CFG_IBDF_BUS, V_P2SB_CFG_IBDF_DEV, + V_P2SB_CFG_IBDF_FUNC); + current += acpi_create_dmar_ds_msi_hpet(current, + 0, V_P2SB_CFG_HBDF_BUS, V_P2SB_CFG_HBDF_DEV, + V_P2SB_CFG_HBDF_FUNC); + + acpi_dmar_drhd_fixup(tmp, current); + } + + /* TCSS Thunderbolt root ports */ + for (unsigned int i = 0; i < MAX_TBT_PCIE_PORT; i++) { + uint64_t tbtbar = MCHBAR64(TBT0BAR + i * 8) & VTBAR_MASK; + bool tbten = MCHBAR32(TBT0BAR + i * 8) & VTBAR_ENABLED; + if (tbtbar && tbten) { + unsigned long tmp = current; + + current += acpi_create_dmar_drhd(current, 0, 0, tbtbar); + current += acpi_create_dmar_ds_pci(current, 0, 7, i); + + acpi_dmar_drhd_fixup(tmp, current); + } + } + + /* Add RMRR entry */ + const unsigned long tmp = current; + current += acpi_create_dmar_rmrr(current, 0, + sa_get_gsm_base(), sa_get_tolud_base() - 1); + current += acpi_create_dmar_ds_pci(current, 0, 2, 0); + acpi_dmar_rmrr_fixup(tmp, current); + + return current; +} + +unsigned long sa_write_acpi_tables(const struct device *dev, unsigned long current, + struct acpi_rsdp *rsdp) +{ + acpi_dmar_t *const dmar = (acpi_dmar_t *)current; + + /* + * Create DMAR table only if we have VT-d capability and FSP does not override its + * feature. + */ + if ((pci_read_config32(dev, CAPID0_A) & VTD_DISABLE) || + !(MCHBAR32(VTVC0BAR) & VTBAR_ENABLED)) + return current; + + printk(BIOS_DEBUG, "ACPI: * DMAR\n"); + acpi_create_dmar(dmar, DMAR_INTR_REMAP | DMA_CTRL_PLATFORM_OPT_IN_FLAG, soc_fill_dmar); + current += dmar->header.length; + current = acpi_align_current(current); + acpi_add_table(rsdp, dmar); + + return current; +} + +void acpi_create_gnvs(struct global_nvs_t *gnvs) +{ + config_t *config = config_of_soc(); + + /* Set unknown wake source */ + gnvs->pm1i = -1; + + /* CPU core count */ + gnvs->pcnt = dev_count_cpu(); + + if (CONFIG(CONSOLE_CBMEM)) + /* Update the mem console pointer. */ + gnvs->cbmc = (uintptr_t)cbmem_find(CBMEM_ID_CONSOLE); + + if (CONFIG(CHROMEOS)) { + /* Initialize Verified Boot data */ + chromeos_init_chromeos_acpi(&(gnvs->chromeos)); + if (CONFIG(EC_GOOGLE_CHROMEEC)) { + gnvs->chromeos.vbt2 = google_ec_running_ro() ? + ACTIVE_ECFW_RO : ACTIVE_ECFW_RW; + } else + gnvs->chromeos.vbt2 = ACTIVE_ECFW_RO; + } + + /* Enable DPTF based on mainboard configuration */ + gnvs->dpte = config->dptf_enable; + + /* Fill in the Wifi Region id */ + gnvs->cid1 = wifi_regulatory_domain(); + + /* Set USB2/USB3 wake enable bitmaps. */ + gnvs->u2we = config->usb2_wake_enable_bitmap; + gnvs->u3we = config->usb3_wake_enable_bitmap; + + /* Fill in Above 4GB MMIO resource */ + sa_fill_gnvs(gnvs); +} + +uint32_t acpi_fill_soc_wake(uint32_t generic_pm1_en, + const struct chipset_power_state *ps) +{ + /* + * WAK_STS bit is set when the system is in one of the sleep states + * (via the SLP_EN bit) and an enabled wake event occurs. Upon setting + * this bit, the PMC will transition the system to the ON state and + * can only be set by hardware and can only be cleared by writing a one + * to this bit position. + */ + + generic_pm1_en |= WAK_STS | RTC_EN | PWRBTN_EN; + return generic_pm1_en; +} + +int soc_madt_sci_irq_polarity(int sci) +{ + return MP_IRQ_POLARITY_HIGH; +} diff --git a/src/soc/intel/elkhartlake/acpi/camera_clock_ctl.asl b/src/soc/intel/elkhartlake/acpi/camera_clock_ctl.asl new file mode 100644 index 0000000..4f08cd7 --- /dev/null +++ b/src/soc/intel/elkhartlake/acpi/camera_clock_ctl.asl @@ -0,0 +1,76 @@ +/* + * This file is part of the coreboot project. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define R_ICLK_PCR_CAMERA1 0x8000 +#define B_ICLK_PCR_FREQUENCY 0x1 +#define B_ICLK_PCR_REQUEST 0x2 + +/* The clock control registers for each IMGCLK are offset by 0xC */ +#define B_ICLK_PCR_OFFSET 0xC + +Scope (\_SB.PCI0) { + + /* IsCLK PCH base register for clock settings */ + Name (ICKB, 0) + Store (PCRB (PID_ISCLK) + R_ICLK_PCR_CAMERA1, ICKB) + + /* + * Arg0 : Clock Number + * Return : Offset of register to control the clock in Arg0 + * + */ + Method (OFST, 0x1, NotSerialized) + { + Return (ICKB + (Arg0 * B_ICLK_PCR_OFFSET)) + } + + /* + * Helper function for Read And OR Write + * Arg0 : source and destination + * Arg1 : And data + * Arg2 : Or data + */ + Method (RAOW, 0x3, Serialized) + { + OperationRegion (ICLK, SystemMemory, OFST(Arg0), 4) + Field (ICLK, AnyAcc, NoLock, Preserve) + { + VAL0, 32 + } + Local0 = VAL0 + VAL0 = Local0 & Arg1 | Arg2 + } + + /* + * Clock control Method + * Arg0: Clock source select(0: IMGCLKOUT_0, 1: IMGCLKOUT_1, 2: IMGCLKOUT_2, 3: IMGCLKOUT_3, + * 4: IMGCLKOUT_4, 5: IMGCLKOUT_5) + * Arg1: Select 24MHz / 19.2 MHz (0: 24MHz, 1: 19.2MHz) + */ + Method (MCON, 0x2, NotSerialized) + { + /* Set Clock Frequency */ + RAOW (Arg0, ~B_ICLK_PCR_FREQUENCY, Arg1) + + /* Enable Clock */ + RAOW (Arg0, ~B_ICLK_PCR_REQUEST, B_ICLK_PCR_REQUEST) + } + + Method (MCOF, 0x1, NotSerialized) + { + /* Disable Clock */ + RAOW (Arg0, ~B_ICLK_PCR_REQUEST, 0) + } +} diff --git a/src/soc/intel/elkhartlake/acpi/gpio.asl b/src/soc/intel/elkhartlake/acpi/gpio.asl new file mode 100644 index 0000000..f1e4498 --- /dev/null +++ b/src/soc/intel/elkhartlake/acpi/gpio.asl @@ -0,0 +1,106 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <intelblocks/gpio.h> +#include <soc/gpio_defs.h> +#include <soc/irq.h> +#include <soc/pcr_ids.h> +#include "gpio_op.asl" + +Device (GPIO) +{ + Name (_HID, CROS_GPIO_NAME) + Name (_UID, 0) + Name (_DDN, "GPIO Controller") + + Name (RBUF, ResourceTemplate() + { + Memory32Fixed (ReadWrite, 0, 0, COM0) + Memory32Fixed (ReadWrite, 0, 0, COM1) + Memory32Fixed (ReadWrite, 0, 0, COM2) + Memory32Fixed (ReadWrite, 0, 0, COM4) + Memory32Fixed (ReadWrite, 0, 0, COM5) + Interrupt (ResourceConsumer, Level, ActiveLow, Shared,,, GIRQ) + { GPIO_IRQ14 } + }) + + Method (_CRS, 0, NotSerialized) + { + /* GPIO Community 0 */ + CreateDWordField (^RBUF, ^COM0._BAS, BAS0) + CreateDWordField (^RBUF, ^COM0._LEN, LEN0) + BAS0 = ^^PCRB (PID_GPIOCOM0) + LEN0 = GPIO_BASE_SIZE + + /* GPIO Community 1 */ + CreateDWordField (^RBUF, ^COM1._BAS, BAS1) + CreateDWordField (^RBUF, ^COM1._LEN, LEN1) + BAS1 = ^^PCRB (PID_GPIOCOM1) + LEN1 = GPIO_BASE_SIZE + + /* GPIO Community 2 */ + CreateDWordField (^RBUF, ^COM2._BAS, BAS2) + CreateDWordField (^RBUF, ^COM2._LEN, LEN2) + BAS2 = ^^PCRB (PID_GPIOCOM2) + LEN2 = GPIO_BASE_SIZE + + /* GPIO Community 4 */ + CreateDWordField (^RBUF, ^COM4._BAS, BAS4) + CreateDWordField (^RBUF, ^COM4._LEN, LEN4) + BAS4 = ^^PCRB (PID_GPIOCOM4) + LEN4 = GPIO_BASE_SIZE + + /* GPIO Community 5 */ + CreateDWordField (^RBUF, ^COM5._BAS, BAS5) + CreateDWordField (^RBUF, ^COM5._LEN, LEN5) + BAS5 = ^^PCRB (PID_GPIOCOM5) + LEN5 = GPIO_BASE_SIZE + + Return (RBUF) + } + + Method (_STA, 0, NotSerialized) + { + Return (0xF) + } +} +/* + * Get GPIO DW0 Address + * Arg0 - GPIO Number + */ +Method (GADD, 1, NotSerialized) +{ + /* GPIO Community 0 */ + If (Arg0 >= GPIO_COM0_START && Arg0 <= GPIO_COM0_END) + { + Local0 = PID_GPIOCOM0 + Local1 = Arg0 - GPIO_COM0_START + } + /* GPIO Community 1 */ + If (Arg0 >= GPIO_COM1_START && Arg0 <= GPIO_COM1_END) + { + Local0 = PID_GPIOCOM1 + Local1 = Arg0 - GPIO_COM1_START + } + /* GPIO Community 2 */ + If (Arg0 >= GPIO_COM2_START && Arg0 <= GPIO_COM2_END) + { + Local0 = PID_GPIOCOM2 + Local1 = Arg0 - GPIO_COM2_START + } + /* GPIO Community 4 */ + If (Arg0 >= GPIO_COM4_START && Arg0 <= GPIO_COM4_END) + { + Local0 = PID_GPIOCOM4 + Local1 = Arg0 - GPIO_COM4_START + } + /* GPIO Community 05*/ + If (Arg0 >= GPIO_COM5_START && Arg0 <= GPIO_COM5_END) + { + Local0 = PID_GPIOCOM5 + Local1 = Arg0 - GPIO_COM5_START + } + + Local2 = PCRB(Local0) + PAD_CFG_BASE + (Local1 * 16) + Return (Local2) +} diff --git a/src/soc/intel/elkhartlake/acpi/gpio_op.asl b/src/soc/intel/elkhartlake/acpi/gpio_op.asl new file mode 100644 index 0000000..be346ae --- /dev/null +++ b/src/soc/intel/elkhartlake/acpi/gpio_op.asl @@ -0,0 +1,128 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +/* + * Get GPIO Value + * Arg0 - GPIO Number + */ +Method (GRXS, 1, Serialized) +{ + OperationRegion (PREG, SystemMemory, GADD (Arg0), 4) + Field (PREG, AnyAcc, NoLock, Preserve) + { + VAL0, 32 + } + And (PAD_CFG0_RX_STATE, ShiftRight (VAL0, PAD_CFG0_RX_STATE_BIT), Local0) + + Return (Local0) +} + +/* + * Get GPIO Tx Value + * Arg0 - GPIO Number + */ +Method (GTXS, 1, Serialized) +{ + OperationRegion (PREG, SystemMemory, GADD (Arg0), 4) + Field (PREG, AnyAcc, NoLock, Preserve) + { + VAL0, 32 + } + And (PAD_CFG0_TX_STATE, VAL0, Local0) + + Return (Local0) +} + +/* + * Set GPIO Tx Value + * Arg0 - GPIO Number + */ +Method (STXS, 1, Serialized) +{ + OperationRegion (PREG, SystemMemory, GADD (Arg0), 4) + Field (PREG, AnyAcc, NoLock, Preserve) + { + VAL0, 32 + } + Or (PAD_CFG0_TX_STATE, VAL0, VAL0) +} + +/* + * Clear GPIO Tx Value + * Arg0 - GPIO Number + */ +Method (CTXS, 1, Serialized) +{ + OperationRegion (PREG, SystemMemory, GADD (Arg0), 4) + Field (PREG, AnyAcc, NoLock, Preserve) + { + VAL0, 32 + } + And (Not (PAD_CFG0_TX_STATE), VAL0, VAL0) +} + +/* + * Set Pad mode + * Arg0 - GPIO Number + * Arg1 - Pad mode + * 0 = GPIO control pad + * 1 = Native Function 1 + * 2 = Native Function 2 + * 3 = Native Function 3 + */ +Method (GPMO, 2, Serialized) +{ + OperationRegion (PREG, SystemMemory, GADD (Arg0), 4) + Field (PREG, AnyAcc, NoLock, Preserve) + { + VAL0, 32 + } + Store (VAL0, Local0) + And (Not (PAD_CFG0_MODE_MASK), Local0, Local0) + And (ShiftLeft (Arg1, PAD_CFG0_MODE_SHIFT, Arg1), PAD_CFG0_MODE_MASK, Arg1) + Or (Local0, Arg1, VAL0) +} + +/* + * Enable/Disable Tx buffer + * Arg0 - GPIO Number + * Arg1 - TxBuffer state + * 0 = Disable Tx Buffer + * 1 = Enable Tx Buffer + */ +Method (GTXE, 2, Serialized) +{ + OperationRegion (PREG, SystemMemory, GADD (Arg0), 4) + Field (PREG, AnyAcc, NoLock, Preserve) + { + VAL0, 32 + } + + If (LEqual (Arg1, 1)) { + And (Not (PAD_CFG0_TX_DISABLE), VAL0, VAL0) + } ElseIf (LEqual (Arg1, 0)){ + Or (PAD_CFG0_TX_DISABLE, VAL0, VAL0) + } +} + +/* + * Enable/Disable Rx buffer + * Arg0 - GPIO Number + * Arg1 - RxBuffer state + * 0 = Disable Rx Buffer + * 1 = Enable Rx Buffer + */ +Method (GRXE, 2, Serialized) +{ + OperationRegion (PREG, SystemMemory, GADD (Arg0), 4) + Field (PREG, AnyAcc, NoLock, Preserve) + { + VAL0, 32 + } + + If (LEqual (Arg1, 1)) { + And (Not (PAD_CFG0_RX_DISABLE), VAL0, VAL0) + } ElseIf (LEqual (Arg1, 0)){ + Or (PAD_CFG0_RX_DISABLE, VAL0, VAL0) + } +} diff --git a/src/soc/intel/elkhartlake/acpi/ipu.asl b/src/soc/intel/elkhartlake/acpi/ipu.asl new file mode 100644 index 0000000..337782d --- /dev/null +++ b/src/soc/intel/elkhartlake/acpi/ipu.asl @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +Scope (\_SB.PCI0) +{ + Device (IPU0) + { + Name (_ADR, 0x00050000) + Name (_DDN, "Camera and Imaging Subsystem") + } +} diff --git a/src/soc/intel/elkhartlake/acpi/ish.asl b/src/soc/intel/elkhartlake/acpi/ish.asl new file mode 100644 index 0000000..bdd3cc7 --- /dev/null +++ b/src/soc/intel/elkhartlake/acpi/ish.asl @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +/* Intel Integrated Sensor Hub Controller 0:12.0 */ + +Device (ISHB) +{ + Name (_ADR, 0x00120000) + Name (_DDN, "Integrated Sensor Hub Controller") +} diff --git a/src/soc/intel/elkhartlake/acpi/pch_glan.asl b/src/soc/intel/elkhartlake/acpi/pch_glan.asl new file mode 100644 index 0000000..174f993 --- /dev/null +++ b/src/soc/intel/elkhartlake/acpi/pch_glan.asl @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +/* Intel Gigabit Ethernet Controller 0:1f.6 */ + +Device (GLAN) +{ + Name (_ADR, 0x001f0006) + + Name (_S0W, 3) + + Name (_PRW, Package() {GPE0_PME_B0, 4}) + + Method (_DSW, 3) {} +} diff --git a/src/soc/intel/elkhartlake/acpi/pch_hda.asl b/src/soc/intel/elkhartlake/acpi/pch_hda.asl new file mode 100644 index 0000000..78ae2c2 --- /dev/null +++ b/src/soc/intel/elkhartlake/acpi/pch_hda.asl @@ -0,0 +1,71 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +/* Audio Controller - Device 31, Function 3 */ + +Device (HDAS) +{ + Name (_ADR, 0x001f0003) + Name (_DDN, "Audio Controller") + Name (UUID, ToUUID ("A69F886E-6CEB-4594-A41F-7B5DCE24C553")) + + /* Device is D3 wake capable */ + Name (_S0W, 3) + + /* NHLT Table Address populated from GNVS values */ + Name (NBUF, ResourceTemplate () { + QWordMemory (ResourceConsumer, PosDecode, MinFixed, + MaxFixed, NonCacheable, ReadOnly, + 0, 0, 0, 0, 1,,, NHLT, AddressRangeACPI) + }) + + /* + * Device Specific Method + * Arg0 - UUID + * Arg1 - Revision + * Arg2 - Function Index + */ + Method (_DSM, 4) + { + If (LEqual (Arg0, ^UUID)) { + /* + * Function 0: Function Support Query + * Returns a bitmask of functions supported. + */ + If (LEqual (Arg2, Zero)) { + /* + * NHLT Query only supported for revision 1 and + * if NHLT address and length are set in NVS. + */ + If (LAnd (LEqual (Arg1, One), + LAnd (LNotEqual (NHLA, Zero), + LNotEqual (NHLL, Zero)))) { + Return (Buffer (One) { 0x03 }) + } Else { + Return (Buffer (One) { 0x01 }) + } + } + + /* + * Function 1: Query NHLT memory address used by + * Intel Offload Engine Driver to discover any non-HDA + * devices that are supported by the DSP. + * + * Returns a pointer to NHLT table in memory. + */ + If (LEqual (Arg2, One)) { + CreateQWordField (NBUF, ^NHLT._MIN, NBAS) + CreateQWordField (NBUF, ^NHLT._MAX, NMAS) + CreateQWordField (NBUF, ^NHLT._LEN, NLEN) + + Store (NHLA, NBAS) + Store (NHLA, NMAS) + Store (NHLL, NLEN) + + Return (NBUF) + } + } + + Return (Buffer (One) { 0x00 }) + } +} diff --git a/src/soc/intel/elkhartlake/acpi/pci_irqs.asl b/src/soc/intel/elkhartlake/acpi/pci_irqs.asl new file mode 100644 index 0000000..086282e --- /dev/null +++ b/src/soc/intel/elkhartlake/acpi/pci_irqs.asl @@ -0,0 +1,141 @@ +/* + * This file is part of the coreboot project. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <soc/irq.h> + +Name (PICP, Package () { + /* cAVS, SMBus, GbE, Northpeak */ + Package(){0x001FFFFF, 3, 0, cAVS_INTA_IRQ }, + Package(){0x001FFFFF, 4, 0, SMBUS_INTB_IRQ }, + Package(){0x001FFFFF, 6, 0, GbE_INTC_IRQ }, + Package(){0x001FFFFF, 7, 0, TRACE_HUB_INTD_IRQ }, + /* SerialIo */ + Package(){0x001EFFFF, 0, 0, LPSS_UART0_IRQ }, + Package(){0x001EFFFF, 1, 0, LPSS_UART1_IRQ }, + Package(){0x001EFFFF, 2, 0, LPSS_SPI0_IRQ }, + Package(){0x001EFFFF, 3, 0, LPSS_SPI1_IRQ }, + /* PCI Express Port 1-8 */ + Package(){0x001CFFFF, 0, 0, PCIE_1_IRQ }, + Package(){0x001CFFFF, 1, 0, PCIE_2_IRQ }, + Package(){0x001CFFFF, 2, 0, PCIE_3_IRQ }, + Package(){0x001CFFFF, 3, 0, PCIE_4_IRQ }, + Package(){0x001CFFFF, 4, 0, PCIE_5_IRQ }, + Package(){0x001CFFFF, 5, 0, PCIE_6_IRQ }, + Package(){0x001CFFFF, 6, 0, PCIE_7_IRQ }, + Package(){0x001CFFFF, 7, 0, PCIE_8_IRQ }, + /* eMMC */ + Package(){0x001AFFFF, 0, 0, eMMC_IRQ }, + /* SerialIo */ + Package(){0x0019FFFF, 0, 0, LPSS_I2C4_IRQ }, + Package(){0x0019FFFF, 1, 0, LPSS_I2C5_IRQ }, + Package(){0x0019FFFF, 2, 0, LPSS_UART2_IRQ }, + /* SATA controller */ + Package(){0x0017FFFF, 0, 0, SATA_IRQ }, + /* CSME (HECI, IDE-R, Keyboard and Text redirection */ + Package(){0x0016FFFF, 0, 0, HECI_1_IRQ }, + Package(){0x0016FFFF, 1, 0, HECI_2_IRQ }, + Package(){0x0016FFFF, 2, 0, IDER_IRQ }, + Package(){0x0016FFFF, 3, 0, KT_IRQ }, + Package(){0x0016FFFF, 4, 0, HECI_3_IRQ }, + Package(){0x0016FFFF, 5, 0, HECI_4_IRQ }, + /* SerialIo */ + Package(){0x0015FFFF, 0, 0, LPSS_I2C0_IRQ }, + Package(){0x0015FFFF, 1, 0, LPSS_I2C1_IRQ }, + Package(){0x0015FFFF, 2, 0, LPSS_I2C2_IRQ }, + Package(){0x0015FFFF, 3, 0, LPSS_I2C3_IRQ }, + /* D20: xHCI, OTG, SRAM, CNVi WiFi, SD */ + Package(){0x0014FFFF, 0, 0, XHCI_IRQ }, + Package(){0x0014FFFF, 1, 0, OTG_IRQ }, + Package(){0x0014FFFF, 2, 0, PMC_SRAM_IRQ }, + Package(){0x0014FFFF, 3, 0, CNViWIFI_IRQ }, + Package(){0x0014FFFF, 5, 0, SD_IRQ }, + /* SerialIo */ + Package(){0x0012FFFF, 6, 0, LPSS_SPI2_IRQ }, + /* SA IGFX Device */ + Package(){0x0002FFFF, 0, 0, IGFX_IRQ }, + /* SA Thermal Device */ + Package(){0x0004FFFF, 0, 0, SA_THERMAL_IRQ }, + /* SA IPU Device */ + Package(){0x0005FFFF, 0, 0, IPU_IRQ }, + /* SA GNA Device */ + Package(){0x0008FFFF, 0, 0, GNA_IRQ }, +}) + +Name (PICN, Package () { + /* D31: cAVS, SMBus, GbE, Northpeak */ + Package () { 0x001FFFFF, 3, 0, 11 }, + Package () { 0x001FFFFF, 4, 0, 10 }, + Package () { 0x001FFFFF, 6, 0, 11 }, + Package () { 0x001FFFFF, 7, 0, 11 }, + /* D30: SerialIo */ + Package () {0x001EFFFF, 0, 0, 11 }, + Package () {0x001EFFFF, 1, 0, 10 }, + Package () {0x001EFFFF, 2, 0, 11 }, + Package () {0x001EFFFF, 3, 0, 11 }, + /* D28: PCI Express Port 1-8 */ + Package () { 0x001CFFFF, 0, 0, 11 }, + Package () { 0x001CFFFF, 1, 0, 10 }, + Package () { 0x001CFFFF, 2, 0, 11 }, + Package () { 0x001CFFFF, 3, 0, 11 }, + Package () { 0x001CFFFF, 4, 0, 11 }, + Package () { 0x001CFFFF, 5, 0, 10 }, + Package () { 0x001CFFFF, 6, 0, 11 }, + Package () { 0x001CFFFF, 7, 0, 11 }, + /* D26: eMMC */ + Package(){0x001AFFFF, 0, 0, 11 }, + /* D25: SerialIo */ + Package () {0x0019FFFF, 0, 0, 11 }, + Package () {0x0019FFFF, 1, 0, 10 }, + Package () {0x0019FFFF, 2, 0, 11 }, + /* D23: SATA controller */ + Package () { 0x0017FFFF, 0, 0, 11 }, + /* D22: CSME (HECI, IDE-R, KT redirection */ + Package () { 0x0016FFFF, 0, 0, 11 }, + Package () { 0x0016FFFF, 1, 0, 10 }, + Package () { 0x0016FFFF, 2, 0, 11 }, + Package () { 0x0016FFFF, 3, 0, 11 }, + Package () { 0x0016FFFF, 4, 0, 11 }, + Package () { 0x0016FFFF, 5, 0, 11 }, + /* D21: SerialIo */ + Package () {0x0015FFFF, 0, 0, 11 }, + Package () {0x0015FFFF, 1, 0, 10 }, + Package () {0x0015FFFF, 2, 0, 11 }, + Package () {0x0015FFFF, 3, 0, 11 }, + /* D20: xHCI, OTG, SRAM, CNVi WiFi, SD */ + Package () { 0x0014FFFF, 0, 0, 11 }, + Package () { 0x0014FFFF, 1, 0, 10 }, + Package () { 0x0014FFFF, 2, 0, 11 }, + Package () { 0x0014FFFF, 3, 0, 11 }, + Package () { 0x0014FFFF, 5, 0, 11 }, + /* D18: SerialIo */ + Package () {0x0012FFFF, 6, 0, 11 }, + /* SA IGFX Device */ + Package () {0x0002FFFF, 0, 0, 11 }, + /* SA Thermal Device */ + Package () { 0x0004FFFF, 0, 0, 11 }, + /* SA IPU Device */ + Package () { 0x0005FFFF, 0, 0, 11 }, + /* SA GNA Device */ + Package () { 0x0008FFFF, 0, 0, 11 }, +}) + +Method (_PRT) +{ + If (PICM) { + Return (^PICP) + } Else { + Return (^PICN) + } +} diff --git a/src/soc/intel/elkhartlake/acpi/pcie.asl b/src/soc/intel/elkhartlake/acpi/pcie.asl new file mode 100644 index 0000000..ce9ce7d --- /dev/null +++ b/src/soc/intel/elkhartlake/acpi/pcie.asl @@ -0,0 +1,302 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +/* Intel PCH PCIe support */ + +Method (IRQM, 1, Serialized) { + + /* Interrupt Map INTA->INTA, INTB->INTB, INTC->INTC, INTD->INTD */ + Name (IQAA, Package () { + Package () { 0x0000ffff, 0, 0, 16 }, + Package () { 0x0000ffff, 1, 0, 17 }, + Package () { 0x0000ffff, 2, 0, 18 }, + Package () { 0x0000ffff, 3, 0, 19 } }) + Name (IQAP, Package () { + Package () { 0x0000ffff, 0, 0, 11 }, + Package () { 0x0000ffff, 1, 0, 10 }, + Package () { 0x0000ffff, 2, 0, 11 }, + Package () { 0x0000ffff, 3, 0, 11 } }) + + /* Interrupt Map INTA->INTB, INTB->INTC, INTC->INTD, INTD->INTA */ + Name (IQBA, Package () { + Package () { 0x0000ffff, 0, 0, 17 }, + Package () { 0x0000ffff, 1, 0, 18 }, + Package () { 0x0000ffff, 2, 0, 19 }, + Package () { 0x0000ffff, 3, 0, 16 } }) + Name (IQBP, Package () { + Package () { 0x0000ffff, 0, 0, 10 }, + Package () { 0x0000ffff, 1, 0, 11 }, + Package () { 0x0000ffff, 2, 0, 11 }, + Package () { 0x0000ffff, 3, 0, 11 } }) + + /* Interrupt Map INTA->INTC, INTB->INTD, INTC->INTA, INTD->INTB */ + Name (IQCA, Package () { + Package () { 0x0000ffff, 0, 0, 18 }, + Package () { 0x0000ffff, 1, 0, 19 }, + Package () { 0x0000ffff, 2, 0, 16 }, + Package () { 0x0000ffff, 3, 0, 17 } }) + Name (IQCP, Package () { + Package () { 0x0000ffff, 0, 0, 11 }, + Package () { 0x0000ffff, 1, 0, 11 }, + Package () { 0x0000ffff, 2, 0, 11 }, + Package () { 0x0000ffff, 3, 0, 10 } }) + + /* Interrupt Map INTA->INTD, INTB->INTA, INTC->INTB, INTD->INTC */ + Name (IQDA, Package () { + Package () { 0x0000ffff, 0, 0, 19 }, + Package () { 0x0000ffff, 1, 0, 16 }, + Package () { 0x0000ffff, 2, 0, 17 }, + Package () { 0x0000ffff, 3, 0, 18 } }) + Name (IQDP, Package () { + Package () { 0x0000ffff, 0, 0, 11 }, + Package () { 0x0000ffff, 1, 0, 11 }, + Package () { 0x0000ffff, 2, 0, 10 }, + Package () { 0x0000ffff, 3, 0, 11 } }) + + Switch (ToInteger (Arg0)) + { + Case (Package () { 1, 5, 9, 13 }) { + If (PICM) { + Return (IQAA) + } Else { + Return (IQAP) + } + } + + Case (Package () { 2, 6, 10, 14 }) { + If (PICM) { + Return (IQBA) + } Else { + Return (IQBP) + } + } + + Case (Package () { 3, 7, 11, 15 }) { + If (PICM) { + Return (IQCA) + } Else { + Return (IQCP) + } + } + + Case (Package () { 4, 8, 12, 16 }) { + If (PICM) { + Return (IQDA) + } Else { + Return (IQDP) + } + } + + Default { + If (PICM) { + Return (IQDA) + } Else { + Return (IQDP) + } + } + } +} + +Device (RP01) +{ + Name (_ADR, 0x001C0000) + + OperationRegion (RPCS, PCI_Config, 0x4c, 4) + Field (RPCS, AnyAcc, NoLock, Preserve) + { + , 24, + RPPN, 8, /* Root Port Number */ + } + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP02) +{ + Name (_ADR, 0x001C0001) + + OperationRegion (RPCS, PCI_Config, 0x4c, 4) + Field (RPCS, AnyAcc, NoLock, Preserve) + { + , 24, + RPPN, 8, /* Root Port Number */ + } + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP03) +{ + Name (_ADR, 0x001C0002) + + OperationRegion (RPCS, PCI_Config, 0x4c, 4) + Field (RPCS, AnyAcc, NoLock, Preserve) + { + , 24, + RPPN, 8, /* Root Port Number */ + } + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP04) +{ + Name (_ADR, 0x001C0003) + + OperationRegion (RPCS, PCI_Config, 0x4c, 4) + Field (RPCS, AnyAcc, NoLock, Preserve) + { + , 24, + RPPN, 8, /* Root Port Number */ + } + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP05) +{ + Name (_ADR, 0x001C0004) + + OperationRegion (RPCS, PCI_Config, 0x4c, 4) + Field (RPCS, AnyAcc, NoLock, Preserve) + { + , 24, + RPPN, 8, /* Root Port Number */ + } + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP06) +{ + Name (_ADR, 0x001C0005) + + OperationRegion (RPCS, PCI_Config, 0x4c, 4) + Field (RPCS, AnyAcc, NoLock, Preserve) + { + , 24, + RPPN, 8, /* Root Port Number */ + } + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP07) +{ + Name (_ADR, 0x001C0006) + + OperationRegion (RPCS, PCI_Config, 0x4c, 4) + Field (RPCS, AnyAcc, NoLock, Preserve) + { + , 24, + RPPN, 8, /* Root Port Number */ + } + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP08) +{ + Name (_ADR, 0x001C0007) + + OperationRegion (RPCS, PCI_Config, 0x4c, 4) + Field (RPCS, AnyAcc, NoLock, Preserve) + { + , 24, + RPPN, 8, /* Root Port Number */ + } + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP09) +{ + Name (_ADR, 0x001D0000) + + OperationRegion (RPCS, PCI_Config, 0x4c, 4) + Field (RPCS, AnyAcc, NoLock, Preserve) + { + , 24, + RPPN, 8, /* Root Port Number */ + } + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP10) +{ + Name (_ADR, 0x001D0001) + + OperationRegion (RPCS, PCI_Config, 0x4c, 4) + Field (RPCS, AnyAcc, NoLock, Preserve) + { + , 24, + RPPN, 8, /* Root Port Number */ + } + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP11) +{ + Name (_ADR, 0x001D0002) + + OperationRegion (RPCS, PCI_Config, 0x4c, 4) + Field (RPCS, AnyAcc, NoLock, Preserve) + { + , 24, + RPPN, 8, /* Root Port Number */ + } + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP12) +{ + Name (_ADR, 0x001D0003) + + OperationRegion (RPCS, PCI_Config, 0x4c, 4) + Field (RPCS, AnyAcc, NoLock, Preserve) + { + , 24, + RPPN, 8, /* Root Port Number */ + } + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} diff --git a/src/soc/intel/elkhartlake/acpi/platform.asl b/src/soc/intel/elkhartlake/acpi/platform.asl new file mode 100644 index 0000000..a579b97 --- /dev/null +++ b/src/soc/intel/elkhartlake/acpi/platform.asl @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +/* Enable ACPI _SWS methods */ +#include <soc/intel/common/acpi/acpi_wake_source.asl> +/* Generic indicator for sleep state */ +#include <soc/intel/common/acpi/platform.asl> + +/* + * The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method (_PIC, 1) +{ + /* Remember the OS' IRQ routing choice. */ + Store (Arg0, PICM) +} diff --git a/src/soc/intel/elkhartlake/acpi/pmc.asl b/src/soc/intel/elkhartlake/acpi/pmc.asl new file mode 100644 index 0000000..840ec46 --- /dev/null +++ b/src/soc/intel/elkhartlake/acpi/pmc.asl @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <soc/iomap.h> + +Scope (\_SB.PCI0) { + + Device (PMC) + { + Name (_HID, "INTC1026") + Name (_DDN, "Intel(R) Jasper Lake IPC Controller") + /* + * PCH preserved 32 MB MMIO range from 0xFC800000 to 0xFE7FFFFF. + * 64KB (0xFE000000 - 0xFE00FFFF) for PMC MBAR. + */ + Name (_CRS, ResourceTemplate () { + Memory32Fixed (ReadWrite, PCH_PWRM_BASE_ADDRESS, 0x00010000) + }) + } +} diff --git a/src/soc/intel/elkhartlake/acpi/scs.asl b/src/soc/intel/elkhartlake/acpi/scs.asl new file mode 100644 index 0000000..a2d9414 --- /dev/null +++ b/src/soc/intel/elkhartlake/acpi/scs.asl @@ -0,0 +1,122 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <soc/pcr_ids.h> + +Scope (\_SB.PCI0) { + + /* + * Clear register 0x1C20/0x4820 + * Arg0 - PCR Port ID + */ + Method(SCSC, 1, Serialized) + { + PCRA (Arg0, 0x1C20, 0x0) + PCRA (Arg0, 0x4820, 0x0) + } + + /* EMMC */ + Device(PEMC) { + Name(_ADR, 0x001A0000) + Name (_DDN, "eMMC Controller") + Name (TEMP, 0) + + OperationRegion(SCSR, PCI_Config, 0x00, 0x100) + Field(SCSR, WordAcc, NoLock, Preserve) { + Offset (0x84), /* PMECTRLSTATUS */ + PMCR, 16, + Offset (0xA2), /* PG_CONFIG */ + , 2, + PGEN, 1, /* PG_ENABLE */ + } + + Method(_INI) { + /* Clear register 0x1C20/0x4820 */ + SCSC (PID_EMMC) + } + + Method(_PS0, 0, Serialized) { + Stall (50) // Sleep 50 us + + Store(0, PGEN) // Disable PG + + /* Clear register 0x1C20/0x4820 */ + SCSC (PID_EMMC) + + /* Set Power State to D0 */ + And (PMCR, 0xFFFC, PMCR) + Store (PMCR, TEMP) + } + + Method(_PS3, 0, Serialized) { + Store(1, PGEN) // Enable PG + + /* Set Power State to D3 */ + Or (PMCR, 0x0003, PMCR) + Store (PMCR, TEMP) + } + + Device (CARD) + { + Name (_ADR, 0x00000008) + Method (_RMV, 0, NotSerialized) + { + Return (0) + } + } + } + + /* SD CARD */ + Device (SDXC) + { + Name (_ADR, 0x00140005) + Name (_DDN, "SD Controller") + Name (TEMP, 0) + + OperationRegion (SDPC, PCI_Config, 0x00, 0x100) + Field (SDPC, WordAcc, NoLock, Preserve) + { + Offset (0x84), /* PMECTRLSTATUS */ + PMCR, 16, + Offset (0xA2), /* PG_CONFIG */ + , 2, + PGEN, 1, /* PG_ENABLE */ + } + + Method(_INI) + { + /* Clear register 0x1C20/0x4820 */ + SCSC (PID_SDX) + } + + Method (_PS0, 0, Serialized) + { + Store (0, PGEN) /* Disable PG */ + + /* Clear register 0x1C20/0x4820 */ + SCSC (PID_SDX) + + /* Set Power State to D0 */ + And (PMCR, 0xFFFC, PMCR) + Store (PMCR, TEMP) + } + + Method (_PS3, 0, Serialized) + { + Store (1, PGEN) /* Enable PG */ + + /* Set Power State to D3 */ + Or (PMCR, 0x0003, PMCR) + Store (PMCR, TEMP) + } + + Device (CARD) + { + Name (_ADR, 0x00000008) + Method (_RMV, 0, NotSerialized) + { + Return (1) + } + } + } /* Device (SDXC) */ +} diff --git a/src/soc/intel/elkhartlake/acpi/serialio.asl b/src/soc/intel/elkhartlake/acpi/serialio.asl new file mode 100644 index 0000000..f7506bb --- /dev/null +++ b/src/soc/intel/elkhartlake/acpi/serialio.asl @@ -0,0 +1,82 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +/* Intel Serial IO Devices */ + +Device (I2C0) +{ + Name (_ADR, 0x00150000) + Name (_DDN, "Serial IO I2C Controller 0") +} + +Device (I2C1) +{ + Name (_ADR, 0x00150001) + Name (_DDN, "Serial IO I2C Controller 1") +} + +Device (I2C2) +{ + Name (_ADR, 0x00150002) + Name (_DDN, "Serial IO I2C Controller 2") +} + +Device (I2C3) +{ + Name (_ADR, 0x00150003) + Name (_DDN, "Serial IO I2C Controller 3") +} + +Device (I2C4) +{ + Name (_ADR, 0x00190000) + Name (_DDN, "Serial IO I2C Controller 4") +} + +Device (I2C5) +{ + Name (_ADR, 0x00190001) + Name (_DDN, "Serial IO I2C Controller 5") +} + +Device (SPI0) +{ + Name (_ADR, 0x001e0002) + Name (_DDN, "Serial IO SPI Controller 0") +} + +Device (SPI1) +{ + Name (_ADR, 0x001e0003) + Name (_DDN, "Serial IO SPI Controller 1") +} + +Device (SPI2) +{ + Name (_ADR, 0x00120006) + Name (_DDN, "Serial IO SPI Controller 2") +} + +Device (SPI3) +{ + Name (_ADR, 0x00130000) + Name (_DDN, "Serial IO SPI Controller 3") +} + +Device (UAR0) +{ + Name (_ADR, 0x001e0000) + Name (_DDN, "Serial IO UART Controller 0") +} + +Device (UAR1) +{ + Name (_ADR, 0x001e0001) + Name (_DDN, "Serial IO UART Controller 1") +} + +Device (UAR2) +{ + Name (_ADR, 0x00190002) + Name (_DDN, "Serial IO UART Controller 2") +} diff --git a/src/soc/intel/elkhartlake/acpi/smbus.asl b/src/soc/intel/elkhartlake/acpi/smbus.asl new file mode 100644 index 0000000..c0d092a --- /dev/null +++ b/src/soc/intel/elkhartlake/acpi/smbus.asl @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +/* Intel SMBus Controller 0:1f.4 */ + +Device (SBUS) +{ + Name (_ADR, 0x001f0004) +} diff --git a/src/soc/intel/elkhartlake/acpi/southbridge.asl b/src/soc/intel/elkhartlake/acpi/southbridge.asl new file mode 100644 index 0000000..c0674a0e --- /dev/null +++ b/src/soc/intel/elkhartlake/acpi/southbridge.asl @@ -0,0 +1,64 @@ +/* + * This file is part of the coreboot project. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <intelblocks/itss.h> +#include <intelblocks/pcr.h> +#include <soc/itss.h> +#include <soc/pcr_ids.h> + +/* PCI IRQ assignment */ +#include "pci_irqs.asl" + +/* PCR access */ +#include <soc/intel/common/acpi/pcr.asl> + +/* PCH clock */ +#include "camera_clock_ctl.asl" + +/* GPIO controller */ +#include "gpio.asl" + +/* ESPI 0:1f.0 */ +#include <soc/intel/common/block/acpi/acpi/lpc.asl> + +/* PCH HDA */ +#include "pch_hda.asl" + +/* PCIE Ports */ +#include "pcie.asl" + +/* pmc 0:1f.2 */ +#include "pmc.asl" + +/* Serial IO */ +#include "serialio.asl" + +/* SMBus 0:1f.4 */ +#include "smbus.asl" + +/* ISH 0:12.0 */ +#include "ish.asl" + +/* USB XHCI 0:14.0 */ +#include "xhci.asl" + +/* PCI _OSC */ +#include <soc/intel/common/acpi/pci_osc.asl> + +/* PMC Core*/ +#include <soc/intel/common/block/acpi/acpi/pmc.asl> + +/* EMMC/SD card */ +#include "scs.asl" diff --git a/src/soc/intel/elkhartlake/acpi/xhci.asl b/src/soc/intel/elkhartlake/acpi/xhci.asl new file mode 100644 index 0000000..87e88c7 --- /dev/null +++ b/src/soc/intel/elkhartlake/acpi/xhci.asl @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <soc/gpe.h> + +/* XHCI Controller 0:14.0 */ + +Device (XHCI) +{ + Name (_ADR, 0x00140000) + + Name (_PRW, Package () { GPE0_PME_B0, 3 }) + + Name (_S3D, 3) /* D3 supported in S3 */ + Name (_S0W, 3) /* D3 can wake device in S0 */ + Name (_S3W, 3) /* D3 can wake system from S3 */ + + Method (_PS0, 0, Serialized) + { + + } + + Method (_PS3, 0, Serialized) + { + + } + + /* Root Hub for Jasperlake PCH */ + Device (RHUB) + { + Name (_ADR, Zero) + + /* USB2 */ + Device (HS01) { Name (_ADR, 1) } + Device (HS02) { Name (_ADR, 2) } + Device (HS03) { Name (_ADR, 3) } + Device (HS04) { Name (_ADR, 4) } + Device (HS05) { Name (_ADR, 5) } + Device (HS06) { Name (_ADR, 6) } + Device (HS07) { Name (_ADR, 7) } + Device (HS08) { Name (_ADR, 8) } + + /* USB3 */ + Device (SS01) { Name (_ADR, 9) } + Device (SS02) { Name (_ADR, 10) } + Device (SS03) { Name (_ADR, 11) } + Device (SS04) { Name (_ADR, 12) } + Device (SS05) { Name (_ADR, 13) } + Device (SS06) { Name (_ADR, 14) } + } +} diff --git a/src/soc/intel/elkhartlake/bootblock/bootblock.c b/src/soc/intel/elkhartlake/bootblock/bootblock.c new file mode 100644 index 0000000..6bf1e13 --- /dev/null +++ b/src/soc/intel/elkhartlake/bootblock/bootblock.c @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <bootblock_common.h> +#include <intelblocks/gspi.h> +#include <intelblocks/systemagent.h> +#include <intelblocks/uart.h> +#include <soc/bootblock.h> +#include <soc/iomap.h> +#include <soc/pch.h> + +asmlinkage void bootblock_c_entry(uint64_t base_timestamp) +{ + /* Call lib/bootblock.c main */ + bootblock_main_with_basetime(base_timestamp); +} + +void bootblock_soc_early_init(void) +{ + bootblock_systemagent_early_init(); + bootblock_pch_early_init(); + bootblock_cpu_init(); + pch_early_iorange_init(); + if (CONFIG(INTEL_LPSS_UART_FOR_CONSOLE)) + uart_bootblock_init(); +} + +void bootblock_soc_init(void) +{ + report_platform_info(); + pch_init(); +} diff --git a/src/soc/intel/elkhartlake/bootblock/cpu.c b/src/soc/intel/elkhartlake/bootblock/cpu.c new file mode 100644 index 0000000..f17cd4d --- /dev/null +++ b/src/soc/intel/elkhartlake/bootblock/cpu.c @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <intelblocks/fast_spi.h> +#include <soc/bootblock.h> + +void bootblock_cpu_init(void) +{ + /* + * Jasperlake platform doesn't support booting from any other media + * (like eMMC on APL/GLK platform) than only booting from SPI device + * and on IA platform SPI is memory mapped hence enabling temporarily + * cacheing on memory-mapped spi boot media. + * + * This assumption will not hold good for APL/GLK platform where boot + * from eMMC is also possible options. + */ + fast_spi_cache_bios_region(); +} diff --git a/src/soc/intel/elkhartlake/bootblock/pch.c b/src/soc/intel/elkhartlake/bootblock/pch.c new file mode 100644 index 0000000..9c517fe --- /dev/null +++ b/src/soc/intel/elkhartlake/bootblock/pch.c @@ -0,0 +1,159 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <console/console.h> +#include <console/post_codes.h> +#include <device/mmio.h> +#include <device/device.h> +#include <device/pci_ops.h> +#include <intelblocks/fast_spi.h> +#include <intelblocks/gspi.h> +#include <intelblocks/lpc_lib.h> +#include <intelblocks/p2sb.h> +#include <intelblocks/pcr.h> +#include <intelblocks/pmclib.h> +#include <intelblocks/rtc.h> +#include <soc/bootblock.h> +#include <soc/espi.h> +#include <soc/iomap.h> +#include <soc/p2sb.h> +#include <soc/pch.h> +#include <soc/pci_devs.h> +#include <soc/pcr_ids.h> +#include <soc/pm.h> + +#define PCR_PSF3_TO_SHDW_PMC_REG_BASE 0xA00 + +#define PCR_PSFX_TO_SHDW_BAR0 0 +#define PCR_PSFX_TO_SHDW_BAR1 0x4 +#define PCR_PSFX_TO_SHDW_BAR2 0x8 +#define PCR_PSFX_TO_SHDW_BAR3 0xC +#define PCR_PSFX_TO_SHDW_BAR4 0x10 +#define PCR_PSFX_TO_SHDW_PCIEN_IOEN 0x01 +#define PCR_PSFX_T0_SHDW_PCIEN 0x1C + +#define PCR_DMI_DMICTL 0x2234 +#define PCR_DMI_DMICTL_SRLOCK (1 << 31) + +#define PCR_DMI_ACPIBA 0x27B4 +#define PCR_DMI_ACPIBDID 0x27B8 +#define PCR_DMI_PMBASEA 0x27AC +#define PCR_DMI_PMBASEC 0x27B0 + +#define PCR_DMI_LPCIOD 0x2770 +#define PCR_DMI_LPCIOE 0x2774 + +static void soc_config_pwrmbase(void) +{ + uint32_t reg32; + + /* + * Assign Resources to PWRMBASE + * Clear BIT 1-2 Command Register + */ + reg32 = pci_read_config32(PCH_DEV_PMC, PCI_COMMAND); + reg32 &= ~(PCI_COMMAND_MEMORY); + pci_write_config32(PCH_DEV_PMC, PCI_COMMAND, reg32); + + /* Program PWRM Base */ + pci_write_config32(PCH_DEV_PMC, PWRMBASE, PCH_PWRM_BASE_ADDRESS); + + /* Enable Bus Master and MMIO Space */ + reg32 = pci_read_config32(PCH_DEV_PMC, PCI_COMMAND); + reg32 |= PCI_COMMAND_MEMORY; + pci_write_config32(PCH_DEV_PMC, PCI_COMMAND, reg32); + + /* Enable PWRM in PMC */ + reg32 = read32((void *)(PCH_PWRM_BASE_ADDRESS + ACTL)); + write32((void *)(PCH_PWRM_BASE_ADDRESS + ACTL), reg32 | PWRM_EN); +} + +void bootblock_pch_early_init(void) +{ + fast_spi_early_init(SPI_BASE_ADDRESS); + gspi_early_bar_init(); + p2sb_enable_bar(); + p2sb_configure_hpet(); + + /* + * Enabling PWRM Base for accessing + * Global Reset Cause Register. + */ + soc_config_pwrmbase(); +} + +static void soc_config_acpibase(void) +{ + uint32_t pmc_reg_value; + uint32_t pmc_base_reg = PCR_PSF3_TO_SHDW_PMC_REG_BASE; + + pmc_reg_value = pcr_read32(PID_PSF3, pmc_base_reg + PCR_PSFX_TO_SHDW_BAR4); + + if (pmc_reg_value != 0xffffffff) { + /* Disable Io Space before changing the address */ + pcr_rmw32(PID_PSF3, pmc_base_reg + PCR_PSFX_T0_SHDW_PCIEN, + ~PCR_PSFX_TO_SHDW_PCIEN_IOEN, 0); + /* Program ABASE in PSF3 PMC space BAR4*/ + pcr_write32(PID_PSF3, pmc_base_reg + PCR_PSFX_TO_SHDW_BAR4, + ACPI_BASE_ADDRESS); + /* Enable IO Space */ + pcr_rmw32(PID_PSF3, pmc_base_reg + PCR_PSFX_T0_SHDW_PCIEN, + ~0, PCR_PSFX_TO_SHDW_PCIEN_IOEN); + } +} + +static int pch_check_decode_enable(void) +{ + uint32_t dmi_control; + + /* + * This cycle decoding is only allowed to set when + * DMICTL.SRLOCK is 0. + */ + dmi_control = pcr_read32(PID_DMI, PCR_DMI_DMICTL); + if (dmi_control & PCR_DMI_DMICTL_SRLOCK) + return -1; + return 0; +} + +void pch_early_iorange_init(void) +{ + uint16_t io_enables = LPC_IOE_SUPERIO_2E_2F | LPC_IOE_KBC_60_64 | + LPC_IOE_EC_62_66 | LPC_IOE_LGE_200; + + /* IO Decode Range */ + if (CONFIG(DRIVERS_UART_8250IO)) + lpc_io_setup_comm_a_b(); + + /* IO Decode Enable */ + if (pch_check_decode_enable() == 0) { + io_enables = lpc_enable_fixed_io_ranges(io_enables); + /* + * Set ESPI IO Enables PCR[DMI] + 2774h [15:0] to the same + * value programmed in ESPI PCI offset 82h. + */ + pcr_write16(PID_DMI, PCR_DMI_LPCIOE, io_enables); + /* + * Set LPC IO Decode Ranges PCR[DMI] + 2770h [15:0] to the same + * value programmed in LPC PCI offset 80h. + */ + pcr_write16(PID_DMI, PCR_DMI_LPCIOD, lpc_get_fixed_io_decode()); + } + + /* Program generic IO Decode Range */ + pch_enable_lpc(); +} + +void pch_init(void) +{ + /* + * Enabling ABASE for accessing PM1_STS, PM1_EN, PM1_CNT, + * GPE0_STS, GPE0_EN registers. + */ + soc_config_acpibase(); + + /* Set up GPE configuration */ + pmc_gpe_init(); + + enable_rtc_upper_bank(); +} diff --git a/src/soc/intel/elkhartlake/bootblock/report_platform.c b/src/soc/intel/elkhartlake/bootblock/report_platform.c new file mode 100644 index 0000000..9cd3c58 --- /dev/null +++ b/src/soc/intel/elkhartlake/bootblock/report_platform.c @@ -0,0 +1,178 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <arch/cpu.h> +#include <device/pci_ops.h> +#include <console/console.h> +#include <cpu/x86/msr.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <intelblocks/mp_init.h> +#include <soc/bootblock.h> +#include <soc/pch.h> +#include <soc/pci_devs.h> +#include <string.h> + +#define BIOS_SIGN_ID 0x8B + +static struct { + u32 cpuid; + const char *name; +} cpu_table[] = { + { CPUID_JASPERLAKE_A0, "Jasperlake A0" }, +}; + +static struct { + u16 mchid; + const char *name; +} mch_table[] = { + { PCI_DEVICE_ID_INTEL_JSL_ID_1, "Jasperlake SKU4-1" }, + { PCI_DEVICE_ID_INTEL_JSL_ID_2, "Jasperlake SKU4-2" }, + { PCI_DEVICE_ID_INTEL_JSL_ID_3, "Jasperlake SKU2-1" }, + { PCI_DEVICE_ID_INTEL_JSL_ID_4, "Jasperlake SKU2-2" }, +}; + +static struct { + u16 espiid; + const char *name; +} pch_table[] = { + { PCI_DEVICE_ID_INTEL_JSP_SUPER_ESPI, "Jasperlake Super" }, +}; + +static struct { + u16 igdid; + const char *name; +} igd_table[] = { + { PCI_DEVICE_ID_INTEL_JSL_GT1, "Jasperlake GT1" }, + { PCI_DEVICE_ID_INTEL_JSL_GT2, "Jasperlake GT2" }, +}; + +static inline uint8_t get_dev_revision(pci_devfn_t dev) +{ + return pci_read_config8(dev, PCI_REVISION_ID); +} + +static inline uint16_t get_dev_id(pci_devfn_t dev) +{ + return pci_read_config16(dev, PCI_DEVICE_ID); +} + +static void report_cpu_info(void) +{ + struct cpuid_result cpuidr; + u32 i, index, cpu_id, cpu_feature_flag; + const char cpu_not_found[] = "Platform info not available"; + const char *cpu_name = cpu_not_found; /* 48 bytes are reported */ + int vt, txt, aes; + msr_t microcode_ver; + static const char *const mode[] = {"NOT ", ""}; + const char *cpu_type = "Unknown"; + u32 p[13]; + + index = 0x80000000; + cpuidr = cpuid(index); + if (cpuidr.eax >= 0x80000004) { + int j = 0; + + for (i = 2; i <= 4; i++) { + cpuidr = cpuid(index + i); + p[j++] = cpuidr.eax; + p[j++] = cpuidr.ebx; + p[j++] = cpuidr.ecx; + p[j++] = cpuidr.edx; + } + p[12] = 0; + cpu_name = (char *)p; + + /* Skip leading spaces in CPU name string */ + while (cpu_name[0] == ' ' && strlen(cpu_name) > 0) + cpu_name++; + } + + microcode_ver.lo = 0; + microcode_ver.hi = 0; + wrmsr(BIOS_SIGN_ID, microcode_ver); + cpu_id = cpu_get_cpuid(); + microcode_ver = rdmsr(BIOS_SIGN_ID); + + /* Look for string to match the name */ + for (i = 0; i < ARRAY_SIZE(cpu_table); i++) { + if (cpu_table[i].cpuid == cpu_id) { + cpu_type = cpu_table[i].name; + break; + } + } + + printk(BIOS_DEBUG, "CPU: %s\n", cpu_name); + printk(BIOS_DEBUG, "CPU: ID %x, %s, ucode: %08x\n", + cpu_id, cpu_type, microcode_ver.hi); + + cpu_feature_flag = cpu_get_feature_flags_ecx(); + aes = (cpu_feature_flag & CPUID_AES) ? 1 : 0; + txt = (cpu_feature_flag & CPUID_SMX) ? 1 : 0; + vt = (cpu_feature_flag & CPUID_VMX) ? 1 : 0; + printk(BIOS_DEBUG, + "CPU: AES %ssupported, TXT %ssupported, VT %ssupported\n", + mode[aes], mode[txt], mode[vt]); +} + +static void report_mch_info(void) +{ + int i; + pci_devfn_t dev = SA_DEV_ROOT; + uint16_t mchid = get_dev_id(dev); + uint8_t mch_revision = get_dev_revision(dev); + const char *mch_type = "Unknown"; + + for (i = 0; i < ARRAY_SIZE(mch_table); i++) { + if (mch_table[i].mchid == mchid) { + mch_type = mch_table[i].name; + break; + } + } + + printk(BIOS_DEBUG, "MCH: device id %04x (rev %02x) is %s\n", + mchid, mch_revision, mch_type); +} + +static void report_pch_info(void) +{ + int i; + pci_devfn_t dev = PCH_DEV_ESPI; + uint16_t espiid = get_dev_id(dev); + const char *pch_type = "Unknown"; + + for (i = 0; i < ARRAY_SIZE(pch_table); i++) { + if (pch_table[i].espiid == espiid) { + pch_type = pch_table[i].name; + break; + } + } + printk(BIOS_DEBUG, "PCH: device id %04x (rev %02x) is %s\n", + espiid, get_dev_revision(dev), pch_type); +} + +static void report_igd_info(void) +{ + int i; + pci_devfn_t dev = SA_DEV_IGD; + uint16_t igdid = get_dev_id(dev); + const char *igd_type = "Unknown"; + + for (i = 0; i < ARRAY_SIZE(igd_table); i++) { + if (igd_table[i].igdid == igdid) { + igd_type = igd_table[i].name; + break; + } + } + printk(BIOS_DEBUG, "IGD: device id %04x (rev %02x) is %s\n", + igdid, get_dev_revision(dev), igd_type); +} + +void report_platform_info(void) +{ + report_cpu_info(); + report_mch_info(); + report_pch_info(); + report_igd_info(); +} diff --git a/src/soc/intel/elkhartlake/chip.c b/src/soc/intel/elkhartlake/chip.c new file mode 100644 index 0000000..7b53e17 --- /dev/null +++ b/src/soc/intel/elkhartlake/chip.c @@ -0,0 +1,170 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <device/device.h> +#include <device/pci.h> +#include <fsp/api.h> +#include <fsp/util.h> +#include <intelblocks/acpi.h> +#include <intelblocks/cfg.h> +#include <intelblocks/itss.h> +#include <intelblocks/xdci.h> +#include <romstage_handoff.h> +#include <soc/intel/common/vbt.h> +#include <soc/itss.h> +#include <soc/pci_devs.h> +#include <soc/ramstage.h> +#include <soc/soc_chip.h> + +#if CONFIG(HAVE_ACPI_TABLES) +const char *soc_acpi_name(const struct device *dev) +{ + if (dev->path.type == DEVICE_PATH_DOMAIN) + return "PCI0"; + + if (dev->path.type == DEVICE_PATH_USB) { + switch (dev->path.usb.port_type) { + case 0: + /* Root Hub */ + return "RHUB"; + case 2: + /* USB2 ports */ + switch (dev->path.usb.port_id) { + case 0: return "HS01"; + case 1: return "HS02"; + case 2: return "HS03"; + case 3: return "HS04"; + case 4: return "HS05"; + case 5: return "HS06"; + case 6: return "HS07"; + case 7: return "HS08"; + case 8: return "HS09"; + case 9: return "HS10"; + } + break; + case 3: + /* USB3 ports */ + switch (dev->path.usb.port_id) { + case 0: return "SS01"; + case 1: return "SS02"; + case 2: return "SS03"; + case 3: return "SS04"; + } + break; + } + return NULL; + } + if (dev->path.type != DEVICE_PATH_PCI) + return NULL; + + switch (dev->path.pci.devfn) { + case SA_DEVFN_ROOT: return "MCHC"; + case PCH_DEVFN_ISH: return "ISHB"; + case PCH_DEVFN_XHCI: return "XHCI"; + case PCH_DEVFN_I2C0: return "I2C0"; + case PCH_DEVFN_I2C1: return "I2C1"; + case PCH_DEVFN_I2C2: return "I2C2"; + case PCH_DEVFN_I2C3: return "I2C3"; + case PCH_DEVFN_I2C4: return "I2C4"; + case PCH_DEVFN_I2C5: return "I2C5"; + case PCH_DEVFN_SATA: return "SATA"; + case PCH_DEVFN_PCIE1: return "RP01"; + case PCH_DEVFN_PCIE2: return "RP02"; + case PCH_DEVFN_PCIE3: return "RP03"; + case PCH_DEVFN_PCIE4: return "RP04"; + case PCH_DEVFN_PCIE5: return "RP05"; + case PCH_DEVFN_PCIE6: return "RP06"; + case PCH_DEVFN_PCIE7: return "RP07"; + case PCH_DEVFN_PCIE8: return "RP08"; + case PCH_DEVFN_PCIE9: return "RP09"; + case PCH_DEVFN_PCIE10: return "RP10"; + case PCH_DEVFN_PCIE11: return "RP11"; + case PCH_DEVFN_PCIE12: return "RP12"; + case PCH_DEVFN_UART0: return "UAR0"; + case PCH_DEVFN_UART1: return "UAR1"; + case PCH_DEVFN_UART2: return "UAR2"; + case PCH_DEVFN_GSPI0: return "SPI0"; + case PCH_DEVFN_GSPI1: return "SPI1"; + case PCH_DEVFN_GSPI2: return "SPI2"; + case PCH_DEVFN_GSPI3: return "SPI3"; + /* Keeping ACPI device name coherent with ec.asl */ + case PCH_DEVFN_ESPI: return "LPCB"; + case PCH_DEVFN_HDA: return "HDAS"; + case PCH_DEVFN_SMBUS: return "SBUS"; + case PCH_DEVFN_GBE: return "GLAN"; + } + + return NULL; +} +#endif + +/* SoC rotine to fill GPIO PM mask and value for GPIO_MISCCFG register */ +static void soc_fill_gpio_pm_configuration(void) +{ + uint8_t value[TOTAL_GPIO_COMM]; + const config_t *config = config_of_soc(); + + if (config->gpio_override_pm) + memcpy(value, config->gpio_pm, sizeof(uint8_t) * + TOTAL_GPIO_COMM); + else + memset(value, MISCCFG_ENABLE_GPIO_PM_CONFIG, sizeof(uint8_t) * + TOTAL_GPIO_COMM); + + gpio_pm_configure(value, TOTAL_GPIO_COMM); +} + +void soc_init_pre_device(void *chip_info) +{ + /* Snapshot the current GPIO IRQ polarities. FSP is setting a + * default policy that doesn't honor boards' requirements. */ + itss_snapshot_irq_polarities(GPIO_IRQ_START, GPIO_IRQ_END); + + /* Perform silicon specific init. */ + fsp_silicon_init(romstage_handoff_is_resume()); + + /* Display FIRMWARE_VERSION_INFO_HOB */ + fsp_display_fvi_version_hob(); + + /* Restore GPIO IRQ polarities back to previous settings. */ + itss_restore_irq_polarities(GPIO_IRQ_START, GPIO_IRQ_END); + + soc_fill_gpio_pm_configuration(); +} + +static void pci_domain_set_resources(struct device *dev) +{ + assign_resources(dev->link_list); +} + +static struct device_operations pci_domain_ops = { + .read_resources = &pci_domain_read_resources, + .set_resources = &pci_domain_set_resources, + .scan_bus = &pci_domain_scan_bus, +#if CONFIG(HAVE_ACPI_TABLES) + .acpi_name = &soc_acpi_name, +#endif +}; + +static struct device_operations cpu_bus_ops = { + .read_resources = noop_read_resources, + .set_resources = noop_set_resources, +#if CONFIG(HAVE_ACPI_TABLES) + .acpi_fill_ssdt = generate_cpu_entries, +#endif +}; + +static void soc_enable(struct device *dev) +{ + /* Set the operations if it is a special bus type */ + if (dev->path.type == DEVICE_PATH_DOMAIN) + dev->ops = &pci_domain_ops; + else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) + dev->ops = &cpu_bus_ops; +} + +struct chip_operations soc_intel_jasperlake_ops = { + CHIP_NAME("Intel Jasperlake") + .enable_dev = &soc_enable, + .init = &soc_init_pre_device, +}; diff --git a/src/soc/intel/elkhartlake/chip.h b/src/soc/intel/elkhartlake/chip.h new file mode 100644 index 0000000..3983d03 --- /dev/null +++ b/src/soc/intel/elkhartlake/chip.h @@ -0,0 +1,288 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef _SOC_CHIP_H_ +#define _SOC_CHIP_H_ + +#include <drivers/i2c/designware/dw_i2c.h> +#include <intelblocks/cfg.h> +#include <intelblocks/gpio.h> +#include <intelblocks/gspi.h> +#include <soc/gpe.h> +#include <soc/gpio.h> +#include <soc/gpio_defs.h> +#include <soc/pch.h> +#include <soc/pci_devs.h> +#include <soc/pmc.h> +#include <soc/serialio.h> +#include <soc/usb.h> +#include <stdint.h> + +#define MAX_HD_AUDIO_DMIC_LINKS 2 +#define MAX_HD_AUDIO_SNDW_LINKS 4 +#define MAX_HD_AUDIO_SSP_LINKS 6 + +struct soc_intel_jasperlake_config { + + /* Common struct containing soc config data required by common code */ + struct soc_intel_common_config common_soc_config; + + /* Gpio group routed to each dword of the GPE0 block. Values are + * of the form PMC_GPP_[A:U] or GPD. */ + uint8_t pmc_gpe0_dw0; /* GPE0_31_0 STS/EN */ + uint8_t pmc_gpe0_dw1; /* GPE0_63_32 STS/EN */ + uint8_t pmc_gpe0_dw2; /* GPE0_95_64 STS/EN */ + + /* Generic IO decode ranges */ + uint32_t gen1_dec; + uint32_t gen2_dec; + uint32_t gen3_dec; + uint32_t gen4_dec; + + /* Enable S0iX support */ + int s0ix_enable; + /* Enable DPTF support */ + int dptf_enable; + + /* Deep SX enable for both AC and DC */ + int deep_s3_enable_ac; + int deep_s3_enable_dc; + int deep_s5_enable_ac; + int deep_s5_enable_dc; + + /* Deep Sx Configuration + * DSX_EN_WAKE_PIN - Enable WAKE# pin + * DSX_EN_LAN_WAKE_PIN - Enable LAN_WAKE# pin + * DSX_DIS_AC_PRESENT_PD - Disable pull-down on AC_PRESENT pin */ + uint32_t deep_sx_config; + + /* TCC activation offset */ + uint32_t tcc_offset; + + /* System Agent dynamic frequency support. Only effects ULX/ULT CPUs. + * When enabled memory will be training at two different frequencies. + * 0:Disabled, 1:FixedPoint0, 2:FixedPoint1, 3:FixedPoint2, + * 4:FixedPoint3, 5:Enabled */ + enum { + SaGv_Disabled, + SaGv_FixedPoint0, + SaGv_FixedPoint1, + SaGv_FixedPoint2, + SaGv_FixedPoint3, + SaGv_Enabled, + } SaGv; + + /* Rank Margin Tool. 1:Enable, 0:Disable */ + uint8_t RMT; + + /* USB related */ + struct usb2_port_config usb2_ports[16]; + struct usb3_port_config usb3_ports[10]; + /* Wake Enable Bitmap for USB2 ports */ + uint16_t usb2_wake_enable_bitmap; + /* Wake Enable Bitmap for USB3 ports */ + uint16_t usb3_wake_enable_bitmap; + + /* SATA related */ + uint8_t SataEnable; + uint8_t SataMode; + uint8_t SataSalpSupport; + uint8_t SataPortsEnable[8]; + uint8_t SataPortsDevSlp[8]; + + /* Audio related */ + uint8_t PchHdaDspEnable; + uint8_t PchHdaAudioLinkHdaEnable; + uint8_t PchHdaAudioLinkDmicEnable[MAX_HD_AUDIO_DMIC_LINKS]; + uint8_t PchHdaAudioLinkSspEnable[MAX_HD_AUDIO_SSP_LINKS]; + uint8_t PchHdaAudioLinkSndwEnable[MAX_HD_AUDIO_SNDW_LINKS]; + uint8_t PchHdaIDispLinkTmode; + uint8_t PchHdaIDispLinkFrequency; + uint8_t PchHdaIDispCodecDisconnect; + + /* PCIe Root Ports */ + uint8_t PcieRpEnable[CONFIG_MAX_ROOT_PORTS]; + /* PCIe output clocks type to PCIe devices. + * 0-23: PCH rootport, 0x70: LAN, 0x80: unspecified but in use, + * 0xFF: not used */ + uint8_t PcieClkSrcUsage[CONFIG_MAX_PCIE_CLOCKS]; + /* PCIe ClkReq-to-ClkSrc mapping, number of clkreq signal assigned to + * clksrc. */ + uint8_t PcieClkSrcClkReq[CONFIG_MAX_PCIE_CLOCKS]; + + /* PCIe RP L1 substate */ + enum L1_substates_control { + L1_SS_FSP_DEFAULT, + L1_SS_DISABLED, + L1_SS_L1_1, + L1_SS_L1_2, + } PcieRpL1Substates[CONFIG_MAX_ROOT_PORTS]; + + /* SMBus */ + uint8_t SmbusEnable; + + /* eMMC and SD */ + uint8_t ScsEmmcHs400Enabled; + + /* Enable if SD Card Power Enable Signal is Active High */ + uint8_t SdCardPowerEnableActiveHigh; + + /* Integrated Sensor */ + uint8_t PchIshEnable; + + /* Heci related */ + uint8_t Heci3Enabled; + + /* Gfx related */ + uint8_t IgdDvmt50PreAlloc; + uint8_t InternalGfx; + uint8_t SkipExtGfxScan; + + uint32_t GraphicsConfigPtr; + uint8_t Device4Enable; + + /* HeciEnabled decides the state of Heci1 at end of boot + * Setting to 0 (default) disables Heci1 and hides the device from OS */ + uint8_t HeciEnabled; + /* PL2 Override value in Watts */ + uint32_t tdp_pl2_override; + /* Intel Speed Shift Technology */ + uint8_t speed_shift_enable; + + /* Enable/Disable EIST. 1b:Enabled, 0b:Disabled */ + uint8_t eist_enable; + + /* Enable C6 DRAM */ + uint8_t enable_c6dram; + /* + * PRMRR size setting with below options + * Disable: 0x0 + * 32MB: 0x2000000 + * 64MB: 0x4000000 + * 128 MB: 0x8000000 + * 256 MB: 0x10000000 + * 512 MB: 0x20000000 + */ + uint32_t PrmrrSize; + uint8_t PmTimerDisabled; + /* + * SerialIO device mode selection: + * PchSerialIoDisabled, + * PchSerialIoPci, + * PchSerialIoHidden, + * PchSerialIoLegacyUart, + * PchSerialIoSkipInit + */ + uint8_t SerialIoI2cMode[CONFIG_SOC_INTEL_I2C_DEV_MAX]; + uint8_t SerialIoGSpiMode[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX]; + uint8_t SerialIoUartMode[CONFIG_SOC_INTEL_UART_DEV_MAX]; + /* + * GSPIn Default Chip Select Mode: + * 0:Hardware Mode, + * 1:Software Mode + */ + uint8_t SerialIoGSpiCsMode[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX]; + /* + * GSPIn Default Chip Select State: + * 0: Low, + * 1: High + */ + uint8_t SerialIoGSpiCsState[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX]; + + /* + * TraceHubMode config + * 0: Disable, 1: Target Debugger Mode, 2: Host Debugger Mode + */ + uint8_t TraceHubMode; + + /* Debug interface selection */ + enum { + DEBUG_INTERFACE_RAM = (1 << 0), + DEBUG_INTERFACE_UART = (1 << 1), + DEBUG_INTERFACE_USB3 = (1 << 3), + DEBUG_INTERFACE_SERIAL_IO = (1 << 4), + DEBUG_INTERFACE_TRACEHUB = (1 << 5), + } debug_interface_flag; + + /* GPIO SD card detect pin */ + unsigned int sdcard_cd_gpio; + + /* Enable Pch iSCLK */ + uint8_t pch_isclk; + + /* CNVi BT Audio Offload: Enable/Disable BT Audio Offload. */ + enum { + FORCE_DISABLE, + FORCE_ENABLE, + } CnviBtAudioOffload; + + /* Tcss */ + uint8_t TcssXhciEn; + uint8_t TcssXdciEn; + + /* + * Override GPIO PM configuration: + * 0: Use FSP default GPIO PM program, + * 1: coreboot to override GPIO PM program + */ + uint8_t gpio_override_pm; + + /* + * GPIO PM configuration: 0 to disable, 1 to enable power gating + * Bit 6-7: Reserved + * Bit 5: MISCCFG_GPSIDEDPCGEN + * Bit 4: MISCCFG_GPRCOMPCDLCGEN + * Bit 3: MISCCFG_GPRTCDLCGEN + * Bit 2: MISCCFG_GSXLCGEN + * Bit 1: MISCCFG_GPDPCGEN + * Bit 0: MISCCFG_GPDLCGEN + */ + uint8_t gpio_pm[TOTAL_GPIO_COMM]; + + /* DP config */ + /* + * Port config + * 0:Disabled, 1:eDP, 2:MIPI DSI + */ + uint8_t DdiPortAConfig; + uint8_t DdiPortBConfig; + + /* Enable(1)/Disable(0) HPD */ + uint8_t DdiPortAHpd; + uint8_t DdiPortBHpd; + uint8_t DdiPortCHpd; + uint8_t DdiPort1Hpd; + uint8_t DdiPort2Hpd; + uint8_t DdiPort3Hpd; + uint8_t DdiPort4Hpd; + + /* Enable(1)/Disable(0) DDC */ + uint8_t DdiPortADdc; + uint8_t DdiPortBDdc; + uint8_t DdiPortCDdc; + uint8_t DdiPort1Ddc; + uint8_t DdiPort2Ddc; + uint8_t DdiPort3Ddc; + uint8_t DdiPort4Ddc; + + /* Hybrid storage mode enable (1) / disable (0) + * This mode makes FSP detect Optane and NVME and set PCIe lane mode + * accordingly */ + uint8_t HybridStorageMode; + + /* + * Override CPU flex ratio value: + * CPU ratio value controls the maximum processor non-turbo ratio. + * Valid Range 0 to 63. + * In general descriptor provides option to set default cpu flex ratio. + * Default cpu flex ratio 0 ensures booting with non-turbo max frequency. + * That's the reason FSP skips cpu_ratio override if cpu_ratio is 0. + * Only override CPU flex ratio to not boot with non-turbo max. + */ + uint8_t cpu_ratio_override; + +}; + +typedef struct soc_intel_jasperlake_config config_t; + +#endif diff --git a/src/soc/intel/elkhartlake/cpu.c b/src/soc/intel/elkhartlake/cpu.c new file mode 100644 index 0000000..b8ffb27 --- /dev/null +++ b/src/soc/intel/elkhartlake/cpu.c @@ -0,0 +1,250 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <arch/cpu.h> +#include <console/console.h> +#include <device/pci.h> +#include <cpu/x86/lapic.h> +#include <cpu/x86/mp.h> +#include <cpu/x86/msr.h> +#include <cpu/intel/smm_reloc.h> +#include <cpu/intel/turbo.h> +#include <fsp/api.h> +#include <intelblocks/cpulib.h> +#include <intelblocks/mp_init.h> +#include <intelblocks/msr.h> +#include <romstage_handoff.h> +#include <soc/cpu.h> +#include <soc/msr.h> +#include <soc/pci_devs.h> +#include <soc/pm.h> +#include <soc/soc_chip.h> + +static void soc_fsp_load(void) +{ + fsps_load(romstage_handoff_is_resume()); +} + +static void configure_isst(void) +{ + config_t *conf = config_of_soc(); + msr_t msr; + + if (conf->speed_shift_enable) { + /* + * Kernel driver checks CPUID.06h:EAX[Bit 7] to determine if HWP + * is supported or not. coreboot needs to configure MSR 0x1AA + * which is then reflected in the CPUID register. + */ + msr = rdmsr(MSR_MISC_PWR_MGMT); + msr.lo |= MISC_PWR_MGMT_ISST_EN; /* Enable Speed Shift */ + msr.lo |= MISC_PWR_MGMT_ISST_EN_INT; /* Enable Interrupt */ + msr.lo |= MISC_PWR_MGMT_ISST_EN_EPP; /* Enable EPP */ + wrmsr(MSR_MISC_PWR_MGMT, msr); + } else { + msr = rdmsr(MSR_MISC_PWR_MGMT); + msr.lo &= ~MISC_PWR_MGMT_ISST_EN; /* Disable Speed Shift */ + msr.lo &= ~MISC_PWR_MGMT_ISST_EN_INT; /* Disable Interrupt */ + msr.lo &= ~MISC_PWR_MGMT_ISST_EN_EPP; /* Disable EPP */ + wrmsr(MSR_MISC_PWR_MGMT, msr); + } +} + +static void configure_misc(void) +{ + msr_t msr; + + config_t *conf = config_of_soc(); + + msr = rdmsr(IA32_MISC_ENABLE); + msr.lo |= (1 << 0); /* Fast String enable */ + msr.lo |= (1 << 3); /* TM1/TM2/EMTTM enable */ + wrmsr(IA32_MISC_ENABLE, msr); + + /* Set EIST status */ + cpu_set_eist(conf->eist_enable); + + /* Disable Thermal interrupts */ + msr.lo = 0; + msr.hi = 0; + wrmsr(IA32_THERM_INTERRUPT, msr); + + /* Enable package critical interrupt only */ + msr.lo = 1 << 4; + msr.hi = 0; + wrmsr(IA32_PACKAGE_THERM_INTERRUPT, msr); + + /* Enable PROCHOT */ + msr = rdmsr(MSR_POWER_CTL); + msr.lo |= (1 << 0); /* Enable Bi-directional PROCHOT as an input*/ + msr.lo |= (1 << 23); /* Lock it */ + wrmsr(MSR_POWER_CTL, msr); +} + +static void enable_lapic_tpr(void) +{ + msr_t msr; + + msr = rdmsr(MSR_PIC_MSG_CONTROL); + msr.lo &= ~(1 << 10); /* Enable APIC TPR updates */ + wrmsr(MSR_PIC_MSG_CONTROL, msr); +} + +static void configure_dca_cap(void) +{ + uint32_t feature_flag; + msr_t msr; + + /* Check feature flag in CPUID.(EAX=1):ECX[18]==1 */ + feature_flag = cpu_get_feature_flags_ecx(); + if (feature_flag & CPUID_DCA) { + msr = rdmsr(IA32_PLATFORM_DCA_CAP); + msr.lo |= 1; + wrmsr(IA32_PLATFORM_DCA_CAP, msr); + } +} + +static void enable_pm_timer_emulation(void) +{ + /* ACPI PM timer emulation */ + msr_t msr; + /* + * The derived frequency is calculated as follows: + * (CTC_FREQ * msr[63:32]) >> 32 = target frequency. + * Back solve the multiplier so the 3.579545MHz ACPI timer + * frequency is used. + */ + msr.hi = (3579545ULL << 32) / CTC_FREQ; + /* Set PM1 timer IO port and enable */ + msr.lo = (EMULATE_DELAY_VALUE << EMULATE_DELAY_OFFSET_VALUE) | + EMULATE_PM_TMR_EN | (ACPI_BASE_ADDRESS + PM1_TMR); + wrmsr(MSR_EMULATE_PM_TIMER, msr); +} + +static void set_energy_perf_bias(u8 policy) +{ + msr_t msr; + int ecx; + + /* Determine if energy efficient policy is supported. */ + ecx = cpuid_ecx(0x6); + if (!(ecx & (1 << 3))) + return; + + /* Energy Policy is bits 3:0 */ + msr = rdmsr(IA32_ENERGY_PERF_BIAS); + msr.lo &= ~0xf; + msr.lo |= policy & 0xf; + wrmsr(IA32_ENERGY_PERF_BIAS, msr); +} + +static void configure_c_states(void) +{ + msr_t msr; + + /* C-state Interrupt Response Latency Control 1 - package C6/C7 short */ + msr.hi = 0; + msr.lo = IRTL_VALID | IRTL_32768_NS | C_STATE_LATENCY_CONTROL_1_LIMIT; + wrmsr(MSR_C_STATE_LATENCY_CONTROL_1, msr); + + /* C-state Interrupt Response Latency Control 2 - package C6/C7 long */ + msr.hi = 0; + msr.lo = IRTL_VALID | IRTL_32768_NS | C_STATE_LATENCY_CONTROL_2_LIMIT; + wrmsr(MSR_C_STATE_LATENCY_CONTROL_2, msr); + + /* C-state Interrupt Response Latency Control 3 - package C8 */ + msr.hi = 0; + msr.lo = IRTL_VALID | IRTL_32768_NS | + C_STATE_LATENCY_CONTROL_3_LIMIT; + wrmsr(MSR_C_STATE_LATENCY_CONTROL_3, msr); + + /* C-state Interrupt Response Latency Control 4 - package C9 */ + msr.hi = 0; + msr.lo = IRTL_VALID | IRTL_32768_NS | + C_STATE_LATENCY_CONTROL_4_LIMIT; + wrmsr(MSR_C_STATE_LATENCY_CONTROL_4, msr); + + /* C-state Interrupt Response Latency Control 5 - package C10 */ + msr.hi = 0; + msr.lo = IRTL_VALID | IRTL_32768_NS | + C_STATE_LATENCY_CONTROL_5_LIMIT; + wrmsr(MSR_C_STATE_LATENCY_CONTROL_5, msr); +} + +/* All CPUs including BSP will run the following function. */ +void soc_core_init(struct device *cpu) +{ + /* Clear out pending MCEs */ + /* TODO(adurbin): This should only be done on a cold boot. Also, some + * of these banks are core vs package scope. For now every CPU clears + * every bank. */ + mca_configure(); + + /* Enable the local CPU apics */ + enable_lapic_tpr(); + setup_lapic(); + + /* Configure c-state interrupt response time */ + configure_c_states(); + + /* Configure Enhanced SpeedStep and Thermal Sensors */ + configure_misc(); + + /* Configure Intel Speed Shift */ + configure_isst(); + + /* Enable PM timer emulation */ + enable_pm_timer_emulation(); + + /* Enable Direct Cache Access */ + configure_dca_cap(); + + /* Set energy policy */ + set_energy_perf_bias(ENERGY_POLICY_NORMAL); + + /* Enable Turbo */ + enable_turbo(); +} + +static void per_cpu_smm_trigger(void) +{ + /* Relocate the SMM handler. */ + smm_relocate(); +} + +static void post_mp_init(void) +{ + /* Set Max Ratio */ + cpu_set_max_ratio(); + + /* + * Now that all APs have been relocated as well as the BSP let SMIs + * start flowing. + */ + smm_southbridge_enable(PWRBTN_EN | GBL_EN); + + /* Lock down the SMRAM space. */ + smm_lock(); +} + +static const struct mp_ops mp_ops = { + /* + * Skip Pre MP init MTRR programming as MTRRs are mirrored from BSP, + * that are set prior to ramstage. + * Real MTRRs programming are being done after resource allocation. + */ + .pre_mp_init = soc_fsp_load, + .get_cpu_count = get_cpu_count, + .get_smm_info = smm_info, + .get_microcode_info = get_microcode_info, + .pre_mp_smm_init = smm_initialize, + .per_cpu_smm_trigger = per_cpu_smm_trigger, + .relocation_handler = smm_relocation_handler, + .post_mp_init = post_mp_init, +}; + +void soc_init_cpus(struct bus *cpu_bus) +{ + if (mp_init_with_smm(cpu_bus, &mp_ops)) + printk(BIOS_ERR, "MP initialization failure.\n"); +} diff --git a/src/soc/intel/elkhartlake/elog.c b/src/soc/intel/elkhartlake/elog.c new file mode 100644 index 0000000..2aceea0 --- /dev/null +++ b/src/soc/intel/elkhartlake/elog.c @@ -0,0 +1,119 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <bootstate.h> +#include <cbmem.h> +#include <console/console.h> +#include <stdint.h> +#include <elog.h> +#include <intelblocks/pmclib.h> +#include <soc/pci_devs.h> +#include <soc/pm.h> + +static void pch_log_gpio_gpe(u32 gpe0_sts, u32 gpe0_en, int start) +{ + int i; + + gpe0_sts &= gpe0_en; + + for (i = 0; i <= 31; i++) { + if (gpe0_sts & (1 << i)) + elog_add_event_wake(ELOG_WAKE_SOURCE_GPIO, i + start); + } +} + +static void pch_log_wake_source(struct chipset_power_state *ps) +{ + /* Power Button */ + if (ps->pm1_sts & PWRBTN_STS) + elog_add_event_wake(ELOG_WAKE_SOURCE_PWRBTN, 0); + + /* RTC */ + if (ps->pm1_sts & RTC_STS) + elog_add_event_wake(ELOG_WAKE_SOURCE_RTC, 0); + + /* PCI Express (TODO: determine wake device) */ + if (ps->pm1_sts & PCIEXPWAK_STS) + elog_add_event_wake(ELOG_WAKE_SOURCE_PCIE, 0); + + /* PME (TODO: determine wake device) */ + if (ps->gpe0_sts[GPE_STD] & PME_STS) + elog_add_event_wake(ELOG_WAKE_SOURCE_PME, 0); + + /* Internal PME (TODO: determine wake device) */ + if (ps->gpe0_sts[GPE_STD] & PME_B0_STS) + elog_add_event_wake(ELOG_WAKE_SOURCE_PME_INTERNAL, 0); + + /* SMBUS Wake */ + if (ps->gpe0_sts[GPE_STD] & SMB_WAK_STS) + elog_add_event_wake(ELOG_WAKE_SOURCE_SMBUS, 0); + + /* Log GPIO events in set 1-3 */ + pch_log_gpio_gpe(ps->gpe0_sts[GPE_31_0], ps->gpe0_en[GPE_31_0], 0); + pch_log_gpio_gpe(ps->gpe0_sts[GPE_63_32], ps->gpe0_en[GPE_63_32], 32); + pch_log_gpio_gpe(ps->gpe0_sts[GPE_95_64], ps->gpe0_en[GPE_95_64], 64); + /* Treat the STD as an extension of GPIO to obtain visibility. */ + pch_log_gpio_gpe(ps->gpe0_sts[GPE_STD], ps->gpe0_en[GPE_STD], 96); +} + +static void pch_log_power_and_resets(struct chipset_power_state *ps) +{ + /* Thermal Trip */ + if (ps->gblrst_cause[0] & GBLRST_CAUSE0_THERMTRIP) + elog_add_event(ELOG_TYPE_THERM_TRIP); + + /* PWR_FLR Power Failure */ + if (ps->gen_pmcon_a & PWR_FLR) + elog_add_event(ELOG_TYPE_POWER_FAIL); + + /* SUS Well Power Failure */ + if (ps->gen_pmcon_a & SUS_PWR_FLR) + elog_add_event(ELOG_TYPE_SUS_POWER_FAIL); + + /* TCO Timeout */ + if (ps->prev_sleep_state != ACPI_S3 && + ps->tco2_sts & TCO_STS_SECOND_TO) + elog_add_event(ELOG_TYPE_TCO_RESET); + + /* Power Button Override */ + if (ps->pm1_sts & PRBTNOR_STS) + elog_add_event(ELOG_TYPE_POWER_BUTTON_OVERRIDE); + + /* RTC reset */ + if (ps->gen_pmcon_b & RTC_BATTERY_DEAD) + elog_add_event(ELOG_TYPE_RTC_RESET); + + /* Host Reset Status */ + if (ps->gen_pmcon_a & HOST_RST_STS) + elog_add_event(ELOG_TYPE_SYSTEM_RESET); + + /* ACPI Wake Event */ + if (ps->prev_sleep_state != ACPI_S0) + elog_add_event_byte(ELOG_TYPE_ACPI_WAKE, ps->prev_sleep_state); +} + +static void pch_log_state(void *unused) +{ + struct chipset_power_state *ps = pmc_get_power_state(); + + if (!ps) { + printk(BIOS_ERR, "chipset_power_state not found!\n"); + return; + } + + /* Power and Reset */ + pch_log_power_and_resets(ps); + + /* Wake Sources */ + if (ps->prev_sleep_state > ACPI_S0) + pch_log_wake_source(ps); +} + +BOOT_STATE_INIT_ENTRY(BS_DEV_INIT, BS_ON_EXIT, pch_log_state, NULL); + +void elog_gsmi_cb_platform_log_wake_source(void) +{ + struct chipset_power_state ps; + pmc_fill_pm_reg_info(&ps); + pch_log_wake_source(&ps); +} diff --git a/src/soc/intel/elkhartlake/espi.c b/src/soc/intel/elkhartlake/espi.c new file mode 100644 index 0000000..dff2f9d --- /dev/null +++ b/src/soc/intel/elkhartlake/espi.c @@ -0,0 +1,212 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <device/device.h> +#include <device/pci.h> +#include <pc80/isa-dma.h> +#include <pc80/i8259.h> +#include <arch/io.h> +#include <device/pci_ops.h> +#include <arch/ioapic.h> +#include <intelblocks/itss.h> +#include <intelblocks/lpc_lib.h> +#include <intelblocks/pcr.h> +#include <reg_script.h> +#include <soc/espi.h> +#include <soc/iomap.h> +#include <soc/irq.h> +#include <soc/pci_devs.h> +#include <soc/pcr_ids.h> +#include <soc/soc_chip.h> + +/* +* As per the BWG, Chapter 5.9.1. "PCH BIOS component will reserve +* certain memory range as reserved range for BIOS usage. +* For this SOC, the range will be from 0FC800000h till FE7FFFFFh" +*/ +static const struct lpc_mmio_range jsl_lpc_fixed_mmio_ranges[] = { + { PCH_PRESERVED_BASE_ADDRESS, PCH_PRESERVED_BASE_SIZE }, + { 0, 0 } +}; + +const struct lpc_mmio_range *soc_get_fixed_mmio_ranges() +{ + return jsl_lpc_fixed_mmio_ranges; +} + +void soc_get_gen_io_dec_range(const struct device *dev, uint32_t *gen_io_dec) +{ + const config_t *config = config_of(dev); + + gen_io_dec[0] = config->gen1_dec; + gen_io_dec[1] = config->gen2_dec; + gen_io_dec[2] = config->gen3_dec; + gen_io_dec[3] = config->gen4_dec; +} + +void soc_setup_dmi_pcr_io_dec(uint32_t *gen_io_dec) +{ + /* Mirror these same settings in DMI PCR */ + pcr_write32(PID_DMI, PCR_DMI_LPCLGIR1, gen_io_dec[0]); + pcr_write32(PID_DMI, PCR_DMI_LPCLGIR2, gen_io_dec[1]); + pcr_write32(PID_DMI, PCR_DMI_LPCLGIR3, gen_io_dec[2]); + pcr_write32(PID_DMI, PCR_DMI_LPCLGIR4, gen_io_dec[3]); +} + +#if ENV_RAMSTAGE +static void soc_mirror_dmi_pcr_io_dec(void) +{ + struct device *dev = pcidev_on_root(PCH_DEV_SLOT_ESPI, 0); + uint32_t io_dec_arr[] = { + pci_read_config32(dev, ESPI_GEN1_DEC), + pci_read_config32(dev, ESPI_GEN2_DEC), + pci_read_config32(dev, ESPI_GEN3_DEC), + pci_read_config32(dev, ESPI_GEN4_DEC), + }; + /* Mirror these same settings in DMI PCR */ + soc_setup_dmi_pcr_io_dec(&io_dec_arr[0]); +} + +static void pch_enable_ioapic(const struct device *dev) +{ + u32 reg32; + /* PCH-LP has 120 redirection entries */ + const int redir_entries = 120; + + set_ioapic_id((void *)IO_APIC_ADDR, 0x02); + + /* affirm full set of redirection table entries ("write once") */ + reg32 = io_apic_read((void *)IO_APIC_ADDR, 0x01); + + reg32 &= ~0x00ff0000; + reg32 |= (redir_entries - 1) << 16; + + io_apic_write((void *)IO_APIC_ADDR, 0x01, reg32); + + /* + * Select Boot Configuration register (0x03) and + * use Processor System Bus (0x01) to deliver interrupts. + */ + io_apic_write((void *)IO_APIC_ADDR, 0x03, 0x01); +} +/* + * PIRQ[n]_ROUT[3:0] - PIRQ Routing Control + * 0x00 - 0000 = Reserved + * 0x01 - 0001 = Reserved + * 0x02 - 0010 = Reserved + * 0x03 - 0011 = IRQ3 + * 0x04 - 0100 = IRQ4 + * 0x05 - 0101 = IRQ5 + * 0x06 - 0110 = IRQ6 + * 0x07 - 0111 = IRQ7 + * 0x08 - 1000 = Reserved + * 0x09 - 1001 = IRQ9 + * 0x0A - 1010 = IRQ10 + * 0x0B - 1011 = IRQ11 + * 0x0C - 1100 = IRQ12 + * 0x0D - 1101 = Reserved + * 0x0E - 1110 = IRQ14 + * 0x0F - 1111 = IRQ15 + * PIRQ[n]_ROUT[7] - PIRQ Routing Control + * 0x80 - The PIRQ is not routed. + */ + +void soc_pch_pirq_init(const struct device *dev) +{ + struct device *irq_dev; + uint8_t pch_interrupt_routing[MAX_PXRC_CONFIG]; + + pch_interrupt_routing[0] = PCH_IRQ11; + pch_interrupt_routing[1] = PCH_IRQ10; + pch_interrupt_routing[2] = PCH_IRQ11; + pch_interrupt_routing[3] = PCH_IRQ11; + pch_interrupt_routing[4] = PCH_IRQ11; + pch_interrupt_routing[5] = PCH_IRQ11; + pch_interrupt_routing[6] = PCH_IRQ11; + pch_interrupt_routing[7] = PCH_IRQ11; + + itss_irq_init(pch_interrupt_routing); + + for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { + u8 int_pin = 0, int_line = 0; + + if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI) + continue; + + int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN); + + switch (int_pin) { + case 1: /* INTA# */ + int_line = PCH_IRQ11; + break; + case 2: /* INTB# */ + int_line = PCH_IRQ10; + break; + case 3: /* INTC# */ + int_line = PCH_IRQ11; + break; + case 4: /* INTD# */ + int_line = PCH_IRQ11; + break; + } + + if (!int_line) + continue; + + pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line); + } +} + +static void pch_misc_init(void) +{ + uint8_t reg8; + + /* Setup NMI on errors, disable SERR */ + reg8 = (inb(0x61)) & 0xf0; + outb((reg8 | (1 << 2)), 0x61); + + /* Disable NMI sources */ + outb((1 << 7), 0x70); +}; + +void lpc_soc_init(struct device *dev) +{ + /* Legacy initialization */ + isa_dma_init(); + pch_misc_init(); + + /* Enable CLKRUN_EN for power gating ESPI */ + lpc_enable_pci_clk_cntl(); + + /* Set ESPI Serial IRQ mode */ + if (CONFIG(SERIRQ_CONTINUOUS_MODE)) + lpc_set_serirq_mode(SERIRQ_CONTINUOUS); + else + lpc_set_serirq_mode(SERIRQ_QUIET); + + /* Interrupt configuration */ + pch_enable_ioapic(dev); + soc_pch_pirq_init(dev); + setup_i8259(); + i8259_configure_irq_trigger(9, 1); + soc_mirror_dmi_pcr_io_dec(); +} + +/* Fill up ESPI IO resource structure inside SoC directory */ +void pch_lpc_soc_fill_io_resources(struct device *dev) +{ + /* + * PMC pci device gets hidden from PCI bus due to Silicon + * policy hence bind ACPI BASE aka ABASE (offset 0x20) with + * ESPI IO resources to ensure that ABASE falls under PCI reserved + * IO memory range. + * + * Note: Don't add any more resource with same offset 0x20 + * under this device space. + */ + pch_lpc_add_new_resource(dev, PCI_BASE_ADDRESS_4, + ACPI_BASE_ADDRESS, ACPI_BASE_SIZE, IORESOURCE_IO | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED); +} + +#endif diff --git a/src/soc/intel/elkhartlake/finalize.c b/src/soc/intel/elkhartlake/finalize.c new file mode 100644 index 0000000..d03c8c7 --- /dev/null +++ b/src/soc/intel/elkhartlake/finalize.c @@ -0,0 +1,100 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <arch/io.h> +#include <device/mmio.h> +#include <bootstate.h> +#include <console/console.h> +#include <console/post_codes.h> +#include <cpu/x86/smm.h> +#include <device/pci.h> +#include <intelblocks/lpc_lib.h> +#include <intelblocks/pcr.h> +#include <intelblocks/tco.h> +#include <intelblocks/thermal.h> +#include <reg_script.h> +#include <spi-generic.h> +#include <soc/p2sb.h> +#include <soc/pci_devs.h> +#include <soc/pcr_ids.h> +#include <soc/pm.h> +#include <soc/smbus.h> +#include <soc/soc_chip.h> +#include <soc/systemagent.h> + +#define CAMERA1_CLK 0x8000 /* Camera 1 Clock */ +#define CAMERA2_CLK 0x8080 /* Camera 2 Clock */ +#define CAM_CLK_EN (1 << 1) +#define MIPI_CLK (1 << 0) +#define HDPLL_CLK (0 << 0) + +static void pch_enable_isclk(void) +{ + pcr_or32(PID_ISCLK, CAMERA1_CLK, CAM_CLK_EN | MIPI_CLK); + pcr_or32(PID_ISCLK, CAMERA2_CLK, CAM_CLK_EN | MIPI_CLK); +} + +static void pch_handle_sideband(config_t *config) +{ + if (config->pch_isclk) + pch_enable_isclk(); +} + +static void pch_finalize(void) +{ + uint32_t reg32; + uint8_t *pmcbase; + config_t *config; + uint8_t reg8; + + /* TCO Lock down */ + tco_lockdown(); + + /* TODO: Add Thermal Configuration */ + + /* + * Disable ACPI PM timer based on dt policy + * + * Disabling ACPI PM timer is necessary for XTAL OSC shutdown. + * Disabling ACPI PM timer also switches off TCO + * + * SA_DEV_ROOT device is used here instead of PCH_DEV_PMC since it is + * just required to get to chip config. PCH_DEV_PMC is hidden by this + * point and hence removed from the root bus. pcidev_path_on_root thus + * returns NULL for PCH_DEV_PMC device. + */ + config = config_of_soc(); + pmcbase = pmc_mmio_regs(); + if (config->PmTimerDisabled) { + reg8 = read8(pmcbase + PCH_PWRM_ACPI_TMR_CTL); + reg8 |= (1 << 1); + write8(pmcbase + PCH_PWRM_ACPI_TMR_CTL, reg8); + } + + /* Disable XTAL shutdown qualification for low power idle. */ + if (config->s0ix_enable) { + reg32 = read32(pmcbase + CPPMVRIC); + reg32 |= XTALSDQDIS; + write32(pmcbase + CPPMVRIC, reg32); + } + + pch_handle_sideband(config); + + pmc_clear_pmcon_sts(); +} + +static void soc_finalize(void *unused) +{ + printk(BIOS_DEBUG, "Finalizing chipset.\n"); + + pch_finalize(); + + printk(BIOS_DEBUG, "Finalizing SMM.\n"); + outb(APM_CNT_FINALIZE, APM_CNT); + + /* Indicate finalize step with post code */ + post_code(POST_OS_BOOT); +} + +BOOT_STATE_INIT_ENTRY(BS_OS_RESUME, BS_ON_ENTRY, soc_finalize, NULL); +BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_LOAD, BS_ON_EXIT, soc_finalize, NULL); diff --git a/src/soc/intel/elkhartlake/fsp_params.c b/src/soc/intel/elkhartlake/fsp_params.c new file mode 100644 index 0000000..19b9300 --- /dev/null +++ b/src/soc/intel/elkhartlake/fsp_params.c @@ -0,0 +1,180 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ +#include <assert.h> +#include <console/console.h> +#include <fsp/api.h> +#include <fsp/ppi/mp_service_ppi.h> +#include <fsp/util.h> +#include <intelblocks/lpss.h> +#include <intelblocks/mp_init.h> +#include <intelblocks/xdci.h> +#include <soc/intel/common/vbt.h> +#include <soc/pci_devs.h> +#include <soc/ramstage.h> +#include <soc/soc_chip.h> +#include <string.h> + +static const pci_devfn_t serial_io_dev[] = { + PCH_DEVFN_I2C0, + PCH_DEVFN_I2C1, + PCH_DEVFN_I2C2, + PCH_DEVFN_I2C3, + PCH_DEVFN_I2C4, + PCH_DEVFN_I2C5, + PCH_DEVFN_GSPI0, + PCH_DEVFN_GSPI1, + PCH_DEVFN_GSPI2, + PCH_DEVFN_UART0, + PCH_DEVFN_UART1, + PCH_DEVFN_UART2 +}; + +static void parse_devicetree(FSP_S_CONFIG *params) +{ + const struct soc_intel_jasperlake_config *config = config_of_soc(); + + /* LPSS controllers configuration */ + + /* I2C */ + _Static_assert(ARRAY_SIZE(params->SerialIoI2cMode) >= + ARRAY_SIZE(config->SerialIoI2cMode), "copy buffer overflow!"); + memcpy(params->SerialIoI2cMode, config->SerialIoI2cMode, + sizeof(config->SerialIoI2cMode)); + + /* GSPI */ + _Static_assert(ARRAY_SIZE(params->SerialIoSpiMode) >= + ARRAY_SIZE(config->SerialIoGSpiMode), "copy buffer overflow!"); + memcpy(params->SerialIoSpiMode, config->SerialIoGSpiMode, + sizeof(config->SerialIoGSpiMode)); + + _Static_assert(ARRAY_SIZE(params->SerialIoSpiCsMode) >= + ARRAY_SIZE(config->SerialIoGSpiCsMode), "copy buffer overflow!"); + memcpy(params->SerialIoSpiCsMode, config->SerialIoGSpiCsMode, + sizeof(config->SerialIoGSpiCsMode)); + + _Static_assert(ARRAY_SIZE(params->SerialIoSpiCsState) >= + ARRAY_SIZE(config->SerialIoGSpiCsState), "copy buffer overflow!"); + memcpy(params->SerialIoSpiCsState, config->SerialIoGSpiCsState, + sizeof(config->SerialIoGSpiCsState)); + + /* UART */ + _Static_assert(ARRAY_SIZE(params->SerialIoUartMode) >= + ARRAY_SIZE(config->SerialIoUartMode), "copy buffer overflow!"); + memcpy(params->SerialIoUartMode, config->SerialIoUartMode, + sizeof(config->SerialIoUartMode)); +} + +/* UPD parameters to be initialized before SiliconInit */ +void platform_fsp_silicon_init_params_cb(FSPS_UPD *supd) +{ + unsigned int i; + struct device *dev; + FSP_S_CONFIG *params = &supd->FspsConfig; + struct soc_intel_jasperlake_config *config = config_of_soc(); + + /* Parse device tree and fill in FSP UPDs */ + parse_devicetree(params); + + /* Load VBT before devicetree-specific config. */ + params->GraphicsConfigPtr = (uintptr_t)vbt_get(); + + /* Check if IGD is present and fill Graphics init param accordingly */ + dev = pcidev_path_on_root(SA_DEVFN_IGD); + + if (CONFIG(RUN_FSP_GOP) && dev && dev->enabled) + params->PeiGraphicsPeimInit = 1; + else + params->PeiGraphicsPeimInit = 0; + + /* Use coreboot MP PPI services if Kconfig is enabled */ + if (CONFIG(USE_INTEL_FSP_TO_CALL_COREBOOT_PUBLISH_MP_PPI)) { + params->CpuMpPpi = (uintptr_t) mp_fill_ppi_services_data(); + params->SkipMpInit = 0; + } else { + params->SkipMpInit = !CONFIG_USE_INTEL_FSP_MP_INIT; + } + + /* Unlock upper 8 bytes of RTC RAM */ + params->RtcMemoryLock = 0; + + /* Legacy 8254 timer support */ + params->Enable8254ClockGating = !CONFIG_USE_LEGACY_8254_TIMER; + params->Enable8254ClockGatingOnS3 = 1; + + /* disable Legacy PME */ + memset(params->PcieRpPmSci, 0, sizeof(params->PcieRpPmSci)); + + /* USB configuration */ + for (i = 0; i < ARRAY_SIZE(config->usb2_ports); i++) { + + params->PortUsb20Enable[i] = config->usb2_ports[i].enable; + params->Usb2OverCurrentPin[i] = config->usb2_ports[i].ocpin; + params->Usb2PhyPetxiset[i] = config->usb2_ports[i].pre_emp_bias; + params->Usb2PhyTxiset[i] = config->usb2_ports[i].tx_bias; + params->Usb2PhyPredeemp[i] = config->usb2_ports[i].tx_emp_enable; + params->Usb2PhyPehalfbit[i] = config->usb2_ports[i].pre_emp_bit; + } + + for (i = 0; i < ARRAY_SIZE(config->usb3_ports); i++) { + + params->PortUsb30Enable[i] = config->usb3_ports[i].enable; + params->Usb3OverCurrentPin[i] = config->usb3_ports[i].ocpin; + if (config->usb3_ports[i].tx_de_emp) { + params->Usb3HsioTxDeEmphEnable[i] = 1; + params->Usb3HsioTxDeEmph[i] = config->usb3_ports[i].tx_de_emp; + } + if (config->usb3_ports[i].tx_downscale_amp) { + params->Usb3HsioTxDownscaleAmpEnable[i] = 1; + params->Usb3HsioTxDownscaleAmp[i] = + config->usb3_ports[i].tx_downscale_amp; + } + } + + /* SDCard related configuration */ + dev = pcidev_path_on_root(PCH_DEVFN_SDCARD); + if (!dev) + params->ScsSdCardEnabled = 0; + else + params->ScsSdCardEnabled = dev->enabled; + + params->Device4Enable = config->Device4Enable; + + /* eMMC configuration */ + dev = pcidev_path_on_root(PCH_DEVFN_EMMC); + if (!dev) { + params->ScsEmmcEnabled = 0; + } else { + params->ScsEmmcEnabled = dev->enabled; + params->ScsEmmcHs400Enabled = config->ScsEmmcHs400Enabled; + } + + /* Enable xDCI controller if enabled in devicetree and allowed */ + dev = pcidev_path_on_root(PCH_DEVFN_USBOTG); + if (dev) { + if (!xdci_can_enable()) + dev->enabled = 0; + + params->XdciEnable = dev->enabled; + } else { + params->XdciEnable = 0; + } + + /* Provide correct UART number for FSP debug logs */ + params->SerialIoDebugUartNumber = CONFIG_UART_FOR_CONSOLE; + + /* Override/Fill FSP Silicon Param for mainboard */ + mainboard_silicon_init_params(params); +} + +/* Mainboard GPIO Configuration */ +__weak void mainboard_silicon_init_params(FSP_S_CONFIG *params) +{ + printk(BIOS_DEBUG, "WEAK: %s/%s called\n", __FILE__, __func__); +} + +/* Return list of SOC LPSS controllers */ +const pci_devfn_t *soc_lpss_controllers_list(size_t *size) +{ + *size = ARRAY_SIZE(serial_io_dev); + return serial_io_dev; +} diff --git a/src/soc/intel/elkhartlake/gpio.c b/src/soc/intel/elkhartlake/gpio.c new file mode 100644 index 0000000..afb9f7b --- /dev/null +++ b/src/soc/intel/elkhartlake/gpio.c @@ -0,0 +1,210 @@ +/* + * This file is part of the coreboot project. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <intelblocks/gpio.h> +#include <intelblocks/pcr.h> +#include <soc/pcr_ids.h> +#include <soc/pmc.h> + +static const struct reset_mapping rst_map[] = { + { .logical = PAD_CFG0_LOGICAL_RESET_RSMRST, .chipset = 0U << 30 }, + { .logical = PAD_CFG0_LOGICAL_RESET_DEEP, .chipset = 1U << 30 }, + { .logical = PAD_CFG0_LOGICAL_RESET_PLTRST, .chipset = 2U << 30 }, +}; + +static const struct reset_mapping rst_map_com0[] = { + { .logical = PAD_CFG0_LOGICAL_RESET_PWROK, .chipset = 0U << 30 }, + { .logical = PAD_CFG0_LOGICAL_RESET_DEEP, .chipset = 1U << 30 }, + { .logical = PAD_CFG0_LOGICAL_RESET_PLTRST, .chipset = 2U << 30 }, + { .logical = PAD_CFG0_LOGICAL_RESET_RSMRST, .chipset = 3U << 30 }, +}; + +/* + * The GPIO driver for Jasperlake on Windows/Linux expects 32 GPIOs per pad + * group, regardless of whether or not there is a physical pad for each + * exposed GPIO number. + * + * This results in the OS having a sparse GPIO map, and devices that need + * to export an ACPI GPIO must use the OS expected number. + * + * Not all pins are usable as GPIO and those groups do not have a pad base. + * + * This layout matches the Linux kernel pinctrl map for JSP at: + * linux/drivers/pinctrl/intel/pinctrl-jasperlake.c + */ +static const struct pad_group jsl_community0_groups[] = { + + INTEL_GPP_BASE(GPP_F0, GPP_F0, GPP_F19, 0), /* GPP_F */ + INTEL_GPP(GPP_F0, GPIO_RSVD_0, GPIO_RSVD_8), + INTEL_GPP_BASE(GPP_F0, GPP_B0, GPP_B23, 32), /* GPP_B */ + INTEL_GPP(GPP_F0, GPIO_RSVD_9, GPIO_RSVD_10), + INTEL_GPP_BASE(GPP_F0, GPP_A0, GPIO_RSVD_11, 64), /* GPP_A */ + INTEL_GPP_BASE(GPP_F0, GPP_S0, GPP_S7, 96), /* GPP_S */ + INTEL_GPP_BASE(GPP_F0, GPP_R0, GPP_R7, 128), /* GPP_R */ +}; + +static const struct pad_group jsl_community1_groups[] = { + INTEL_GPP_BASE(GPP_H0, GPP_H0, GPP_H23, 160), /* GPP_H */ + INTEL_GPP_BASE(GPP_H0, GPP_D0, GPP_D23, 192), /* GPP_D */ + INTEL_GPP(GPP_H0, GPIO_RSVD_12, GPIO_RSVD_13), + INTEL_GPP_BASE(GPP_H0, VGPIO_0, VGPIO_39, 224), /* VGPIO */ + INTEL_GPP_BASE(GPP_H0, GPP_C0, GPP_C23, 256), /* GPP_C */ +}; + +/* This community is not visible to the OS */ +static const struct pad_group jsl_community2_groups[] = { + INTEL_GPP(GPD0, GPD0, GPD10), /* GPD */ + INTEL_GPP(GPD0, GPIO_RSVD_14, GPIO_RSVD_17), +}; + + +static const struct pad_group jsl_community4_groups[] = { + INTEL_GPP(GPIO_RSVD_18, GPIO_RSVD_18, GPIO_RSVD_23), + INTEL_GPP_BASE(GPIO_RSVD_18, GPP_E0, GPP_E23, 288), /* GPP_E */ + INTEL_GPP(GPIO_RSVD_18, GPIO_RSVD_24, GPIO_RSVD_36), +}; + + +static const struct pad_group jsl_community5_groups[] = { + INTEL_GPP_BASE(GPP_G0, GPP_G0, GPP_G7, 320), /* GPP_G */ +}; + +static const struct pad_community jsl_communities[TOTAL_GPIO_COMM] = { + /* GPP F, B, A, S, R */ + [COMM_0] = { + .port = PID_GPIOCOM0, + .first_pad = GPP_F0, + .last_pad = GPP_R7, + .num_gpi_regs = NUM_GPIO_COM0_GPI_REGS, + .pad_cfg_base = PAD_CFG_BASE, + .host_own_reg_0 = HOSTSW_OWN_REG_0, + .gpi_int_sts_reg_0 = GPI_INT_STS_0, + .gpi_int_en_reg_0 = GPI_INT_EN_0, + .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, + .gpi_smi_en_reg_0 = GPI_SMI_EN_0, + .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, + .name = "GPP_FBASR", + .acpi_path = "\\_SB.PCI0.GPIO", + .reset_map = rst_map_com0, + .num_reset_vals = ARRAY_SIZE(rst_map_com0), + .groups = jsl_community0_groups, + .num_groups = ARRAY_SIZE(jsl_community0_groups), + }, + /* GPP H, D, VGPIO, C */ + [COMM_1] = { + .port = PID_GPIOCOM1, + .first_pad = GPP_H0, + .last_pad = GPP_C23, + .num_gpi_regs = NUM_GPIO_COM1_GPI_REGS, + .pad_cfg_base = PAD_CFG_BASE, + .host_own_reg_0 = HOSTSW_OWN_REG_0, + .gpi_int_sts_reg_0 = GPI_INT_STS_0, + .gpi_int_en_reg_0 = GPI_INT_EN_0, + .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, + .gpi_smi_en_reg_0 = GPI_SMI_EN_0, + .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, + .name = "GPP_HDC", + .acpi_path = "\\_SB.PCI0.GPIO", + .reset_map = rst_map, + .num_reset_vals = ARRAY_SIZE(rst_map), + .groups = jsl_community1_groups, + .num_groups = ARRAY_SIZE(jsl_community1_groups), + }, + /* GPD */ + [COMM_2] = { + .port = PID_GPIOCOM2, + .first_pad = GPD0, + .last_pad = GPIO_RSVD_17, + .num_gpi_regs = NUM_GPIO_COM2_GPI_REGS, + .pad_cfg_base = PAD_CFG_BASE, + .host_own_reg_0 = HOSTSW_OWN_REG_0, + .gpi_int_sts_reg_0 = GPI_INT_STS_0, + .gpi_int_en_reg_0 = GPI_INT_EN_0, + .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, + .gpi_smi_en_reg_0 = GPI_SMI_EN_0, + .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, + .name = "GPD", + .acpi_path = "\\_SB.PCI0.GPIO", + .reset_map = rst_map, + .num_reset_vals = ARRAY_SIZE(rst_map), + .groups = jsl_community2_groups, + .num_groups = ARRAY_SIZE(jsl_community2_groups), + }, + /* GPP E */ + [COMM_4] = { + .port = PID_GPIOCOM4, + .first_pad = GPIO_RSVD_18, + .last_pad = GPIO_RSVD_36, + .num_gpi_regs = NUM_GPIO_COM4_GPI_REGS, + .pad_cfg_base = PAD_CFG_BASE, + .host_own_reg_0 = HOSTSW_OWN_REG_0, + .gpi_int_sts_reg_0 = GPI_INT_STS_0, + .gpi_int_en_reg_0 = GPI_INT_EN_0, + .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, + .gpi_smi_en_reg_0 = GPI_SMI_EN_0, + .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, + .name = "GPP_E", + .acpi_path = "\\_SB.PCI0.GPIO", + .reset_map = rst_map, + .num_reset_vals = ARRAY_SIZE(rst_map), + .groups = jsl_community4_groups, + .num_groups = ARRAY_SIZE(jsl_community4_groups), + }, + /* GPP G */ + [COMM_5] = { + .port = PID_GPIOCOM5, + .first_pad = GPP_G0, + .last_pad = GPP_G7, + .num_gpi_regs = NUM_GPIO_COM5_GPI_REGS, + .pad_cfg_base = PAD_CFG_BASE, + .host_own_reg_0 = HOSTSW_OWN_REG_0, + .gpi_int_sts_reg_0 = GPI_INT_STS_0, + .gpi_int_en_reg_0 = GPI_INT_EN_0, + .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, + .gpi_smi_en_reg_0 = GPI_SMI_EN_0, + .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, + .name = "GPP_G", + .acpi_path = "\\_SB.PCI0.GPIO", + .reset_map = rst_map, + .num_reset_vals = ARRAY_SIZE(rst_map), + .groups = jsl_community5_groups, + .num_groups = ARRAY_SIZE(jsl_community5_groups), + } +}; + +const struct pad_community *soc_gpio_get_community(size_t *num_communities) +{ + *num_communities = ARRAY_SIZE(jsl_communities); + return jsl_communities; +} + +const struct pmc_to_gpio_route *soc_pmc_gpio_routes(size_t *num) +{ + static const struct pmc_to_gpio_route routes[] = { + { PMC_GPP_A, GPP_A }, + { PMC_GPP_B, GPP_B }, + { PMC_GPP_R, GPP_R }, + { PMC_GPP_D, GPP_D }, + { PMC_GPP_S, GPP_S }, + { PMC_GPP_H, GPP_H }, + { PMC_GPD, GPP_GPD }, + { PMC_GPP_C, GPP_C }, + { PMC_GPP_E, GPP_E }, + { PMC_GPP_F, GPP_F } + }; + + *num = ARRAY_SIZE(routes); + return routes; +} diff --git a/src/soc/intel/elkhartlake/graphics.c b/src/soc/intel/elkhartlake/graphics.c new file mode 100644 index 0000000..b8192c9 --- /dev/null +++ b/src/soc/intel/elkhartlake/graphics.c @@ -0,0 +1,68 @@ +/* + * This file is part of the coreboot project. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/acpi.h> +#include <console/console.h> +#include <fsp/util.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ops.h> +#include <drivers/intel/gma/opregion.h> +#include <intelblocks/graphics.h> +#include <types.h> + +uintptr_t fsp_soc_get_igd_bar(void) +{ + return graphics_get_memory_base(); +} + +void graphics_soc_init(struct device *dev) +{ + /* + * GFX PEIM module inside FSP binary is taking care of graphics + * initialization based on RUN_FSP_GOP Kconfig + * option and input VBT file. Hence no need to load/execute legacy VGA + * OpROM in order to initialize GFX. + * + * In case of non-FSP solution, SoC need to select VGA_ROM_RUN + * Kconfig to perform GFX initialization through VGA OpRom. + */ + if (CONFIG(RUN_FSP_GOP)) + return; + + /* IGD needs to Bus Master */ + uint32_t reg32 = pci_read_config32(dev, PCI_COMMAND); + reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO; + pci_write_config32(dev, PCI_COMMAND, reg32); + + /* Initialize PCI device, load/execute BIOS Option ROM */ + pci_dev_init(dev); +} + +uintptr_t graphics_soc_write_acpi_opregion(const struct device *device, + uintptr_t current, struct acpi_rsdp *rsdp) +{ + igd_opregion_t *opregion; + + printk(BIOS_DEBUG, "ACPI: * IGD OpRegion\n"); + opregion = (igd_opregion_t *)current; + + if (intel_gma_init_igd_opregion(opregion) != CB_SUCCESS) + return current; + + current += sizeof(igd_opregion_t); + + return acpi_align_current(current); +} diff --git a/src/soc/intel/elkhartlake/gspi.c b/src/soc/intel/elkhartlake/gspi.c new file mode 100644 index 0000000..706eeac --- /dev/null +++ b/src/soc/intel/elkhartlake/gspi.c @@ -0,0 +1,30 @@ +/* + * This file is part of the coreboot project. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <intelblocks/gspi.h> +#include <soc/pci_devs.h> + +int gspi_soc_bus_to_devfn(unsigned int gspi_bus) +{ + switch (gspi_bus) { + case 0: + return PCH_DEVFN_GSPI0; + case 1: + return PCH_DEVFN_GSPI1; + case 2: + return PCH_DEVFN_GSPI2; + } + return -1; +} diff --git a/src/soc/intel/elkhartlake/i2c.c b/src/soc/intel/elkhartlake/i2c.c new file mode 100644 index 0000000..6d9d299 --- /dev/null +++ b/src/soc/intel/elkhartlake/i2c.c @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <device/device.h> +#include <drivers/i2c/designware/dw_i2c.h> +#include <soc/pci_devs.h> + +int dw_i2c_soc_devfn_to_bus(unsigned int devfn) +{ + switch (devfn) { + case PCH_DEVFN_I2C0: + return 0; + case PCH_DEVFN_I2C1: + return 1; + case PCH_DEVFN_I2C2: + return 2; + case PCH_DEVFN_I2C3: + return 3; + case PCH_DEVFN_I2C4: + return 4; + case PCH_DEVFN_I2C5: + return 5; + } + return -1; +} + +int dw_i2c_soc_bus_to_devfn(unsigned int bus) +{ + switch (bus) { + case 0: + return PCH_DEVFN_I2C0; + case 1: + return PCH_DEVFN_I2C1; + case 2: + return PCH_DEVFN_I2C2; + case 3: + return PCH_DEVFN_I2C3; + case 4: + return PCH_DEVFN_I2C4; + case 5: + return PCH_DEVFN_I2C5; + } + return -1; +} diff --git a/src/soc/intel/elkhartlake/include/soc/bootblock.h b/src/soc/intel/elkhartlake/include/soc/bootblock.h new file mode 100644 index 0000000..69f3bfb --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/bootblock.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef _SOC_JASPERLAKE_BOOTBLOCK_H_ +#define _SOC_JASPERLAKE_BOOTBLOCK_H_ + +/* Bootblock pre console init programming */ +void bootblock_cpu_init(void); +void bootblock_pch_early_init(void); + +/* Bootblock post console init programming */ +void pch_init(void); +void pch_early_iorange_init(void); +void report_platform_info(void); + +#endif diff --git a/src/soc/intel/elkhartlake/include/soc/cpu.h b/src/soc/intel/elkhartlake/include/soc/cpu.h new file mode 100644 index 0000000..1ab96e5 --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/cpu.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef _SOC_JASPERLAKE_CPU_H_ +#define _SOC_JASPERLAKE_CPU_H_ + +#include <intelblocks/msr.h> + +/* Latency times in units of 32768ns */ +#define C_STATE_LATENCY_CONTROL_0_LIMIT 0x9d +#define C_STATE_LATENCY_CONTROL_1_LIMIT 0x9d +#define C_STATE_LATENCY_CONTROL_2_LIMIT 0x9d +#define C_STATE_LATENCY_CONTROL_3_LIMIT 0x9d +#define C_STATE_LATENCY_CONTROL_4_LIMIT 0x9d +#define C_STATE_LATENCY_CONTROL_5_LIMIT 0x9d + +/* Power in units of mW */ +#define C1_POWER 0x3e8 +#define C6_POWER 0x15e +#define C7_POWER 0xc8 +#define C8_POWER 0xc8 +#define C9_POWER 0xc8 +#define C10_POWER 0xc8 + +/* Common Timer Copy (CTC) frequency - 38.4MHz. */ +#define CTC_FREQ 38400000 + +#define C_STATE_LATENCY_MICRO_SECONDS(limit, base) \ + (((1 << ((base)*5)) * (limit)) / 1000) +#define C_STATE_LATENCY_FROM_LAT_REG(reg) \ + C_STATE_LATENCY_MICRO_SECONDS(C_STATE_LATENCY_CONTROL_ ##reg## _LIMIT, \ + (IRTL_1024_NS >> 10)) + +/* Configure power limits for turbo mode */ +void set_power_limits(u8 power_limit_1_time); + +#endif diff --git a/src/soc/intel/elkhartlake/include/soc/espi.h b/src/soc/intel/elkhartlake/include/soc/espi.h new file mode 100644 index 0000000..0850b7c --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/espi.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef _SOC_JASPERLAKE_ESPI_H_ +#define _SOC_JASPERLAKE_ESPI_H_ + +#include <stdint.h> + +/* PCI Configuration Space (D31:F0): ESPI */ +#define SCI_IRQ_SEL (7 << 0) +#define SCIS_IRQ9 0 +#define SCIS_IRQ10 1 +#define SCIS_IRQ11 2 +#define SCIS_IRQ20 4 +#define SCIS_IRQ21 5 +#define SCIS_IRQ22 6 +#define SCIS_IRQ23 7 +#define SERIRQ_CNTL 0x64 +#define ESPI_IO_DEC 0x80 /* IO Decode Ranges Register */ +#define COMA_RANGE 0x0 /* 0x3F8 - 0x3FF COM1*/ +#define COMB_RANGE 0x1 /* 0x2F8 - 0x2FF COM2*/ +#define ESPI_GEN1_DEC 0x84 /* ESPI IF Generic Decode Range 1 */ +#define ESPI_GEN2_DEC 0x88 /* ESPI IF Generic Decode Range 2 */ +#define ESPI_GEN3_DEC 0x8c /* ESPI IF Generic Decode Range 3 */ +#define ESPI_GEN4_DEC 0x90 /* ESPI IF Generic Decode Range 4 */ +#define LGMR 0x98 /* ESPI Generic Memory Range */ +#define PCCTL 0xE0 /* PCI Clock Control */ +#define CLKRUN_EN (1 << 0) + +#endif diff --git a/src/soc/intel/elkhartlake/include/soc/gpe.h b/src/soc/intel/elkhartlake/include/soc/gpe.h new file mode 100644 index 0000000..cae23a0 --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/gpe.h @@ -0,0 +1,122 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef _SOC_GPE_H_ +#define _SOC_GPE_H_ + +/* GPE_31_0 */ +#define GPE0_DW0_00 0 +#define GPE0_DW0_01 1 +#define GPE0_DW0_02 2 +#define GPE0_DW0_03 3 +#define GPE0_DW0_04 4 +#define GPE0_DW0_05 5 +#define GPE0_DW0_06 6 +#define GPE0_DW0_07 7 +#define GPE0_DW0_08 8 +#define GPE0_DW0_09 9 +#define GPE0_DW0_10 10 +#define GPE0_DW0_11 11 +#define GPE0_DW0_12 12 +#define GPE0_DW0_13 13 +#define GPE0_DW0_14 14 +#define GPE0_DW0_15 15 +#define GPE0_DW0_16 16 +#define GPE0_DW0_17 17 +#define GPE0_DW0_18 18 +#define GPE0_DW0_19 19 +#define GPE0_DW0_20 20 +#define GPE0_DW0_21 21 +#define GPE0_DW0_22 22 +#define GPE0_DW0_23 23 +#define GPE0_DW0_24 24 +#define GPE0_DW0_25 25 +#define GPE0_DW0_26 26 +#define GPE0_DW0_27 27 +#define GPE0_DW0_28 28 +#define GPE0_DW0_29 29 +#define GPE0_DW0_30 30 +#define GPE0_DW0_31 31 +/* GPE_63_32 */ +#define GPE0_DW1_00 32 +#define GPE0_DW1_01 33 +#define GPE0_DW1_02 34 +#define GPE0_DW1_03 36 +#define GPE0_DW1_04 36 +#define GPE0_DW1_05 37 +#define GPE0_DW1_06 38 +#define GPE0_DW1_07 39 +#define GPE0_DW1_08 40 +#define GPE0_DW1_09 41 +#define GPE0_DW1_10 42 +#define GPE0_DW1_11 43 +#define GPE0_DW1_12 44 +#define GPE0_DW1_13 45 +#define GPE0_DW1_14 46 +#define GPE0_DW1_15 47 +#define GPE0_DW1_16 48 +#define GPE0_DW1_17 49 +#define GPE0_DW1_18 50 +#define GPE0_DW1_19 51 +#define GPE0_DW1_20 52 +#define GPE0_DW1_21 53 +#define GPE0_DW1_22 54 +#define GPE0_DW1_23 55 +#define GPE0_DW1_24 56 +#define GPE0_DW1_25 57 +#define GPE0_DW1_26 58 +#define GPE0_DW1_27 59 +#define GPE0_DW1_28 60 +#define GPE0_DW1_29 61 +#define GPE0_DW1_30 62 +#define GPE0_DW1_31 63 +/* GPE_95_64 */ +#define GPE0_DW2_00 64 +#define GPE0_DW2_01 65 +#define GPE0_DW2_02 66 +#define GPE0_DW2_03 67 +#define GPE0_DW2_04 68 +#define GPE0_DW2_05 69 +#define GPE0_DW2_06 70 +#define GPE0_DW2_07 71 +#define GPE0_DW2_08 72 +#define GPE0_DW2_09 73 +#define GPE0_DW2_10 74 +#define GPE0_DW2_11 75 +#define GPE0_DW2_12 76 +#define GPE0_DW2_13 77 +#define GPE0_DW2_14 78 +#define GPE0_DW2_15 79 +#define GPE0_DW2_16 80 +#define GPE0_DW2_17 81 +#define GPE0_DW2_18 82 +#define GPE0_DW2_19 83 +#define GPE0_DW2_20 84 +#define GPE0_DW2_21 85 +#define GPE0_DW2_22 86 +#define GPE0_DW2_23 87 +#define GPE0_DW2_24 88 +#define GPE0_DW2_25 89 +#define GPE0_DW2_26 90 +#define GPE0_DW2_27 91 +#define GPE0_DW2_28 92 +#define GPE0_DW2_29 93 +#define GPE0_DW2_30 94 +#define GPE0_DW2_31 95 +/* GPE_STD */ +#define GPE0_HOT_PLUG 97 +#define GPE0_SWGPE 98 +#define GPE0_TCOSCI 102 +#define GPE0_SMB_WAK 103 +#define GPE0_PCI_EXP 105 +#define GPE0_BATLOW 106 +#define GPE0_PME 107 +#define GPE0_ME_SCI 108 +#define GPE0_PME_B0 109 +#define GPE0_ESPI 110 +#define GPE0_GPIO_T2 111 +#define GPE0_LAN_WAK 112 +#define GPE0_WADT 114 + +#define GPE_MAX GPE0_WADT +#endif /* _SOC_GPE_H_ */ diff --git a/src/soc/intel/elkhartlake/include/soc/gpio.h b/src/soc/intel/elkhartlake/include/soc/gpio.h new file mode 100644 index 0000000..7231682 --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/gpio.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef _SOC_JASPERLAKE_GPIO_H_ +#define _SOC_JASPERLAKE_GPIO_H_ + +#include <soc/gpio_defs.h> +#include <intelblocks/gpio.h> + + +#define CROS_GPIO_NAME "INT34C8" +#define CROS_GPIO_COMM0_NAME "INT34C8:00" +#define CROS_GPIO_COMM1_NAME "INT34C8:01" +#define CROS_GPIO_COMM4_NAME "INT34C8:02" +#define CROS_GPIO_COMM5_NAME "INT34C8:03" + +#endif diff --git a/src/soc/intel/elkhartlake/include/soc/gpio_defs.h b/src/soc/intel/elkhartlake/include/soc/gpio_defs.h new file mode 100644 index 0000000..f563bfc --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/gpio_defs.h @@ -0,0 +1,261 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef _SOC_JASPERLAKE_GPIO_DEFS_H_ +#define _SOC_JASPERLAKE_GPIO_DEFS_H_ + +#ifndef __ACPI__ +#include <stddef.h> +#endif +#include <soc/gpio_soc_defs.h> + + +#define GPIO_NUM_PAD_CFG_REGS 4 /* DW0, DW1, DW2, DW3 */ + +#define NUM_GPIO_COMx_GPI_REGS(n) \ + (ALIGN_UP((n), GPIO_MAX_NUM_PER_GROUP) / GPIO_MAX_NUM_PER_GROUP) + +#define NUM_GPIO_COM0_GPI_REGS NUM_GPIO_COMx_GPI_REGS(NUM_GPIO_COM0_PADS) +#define NUM_GPIO_COM1_GPI_REGS NUM_GPIO_COMx_GPI_REGS(NUM_GPIO_COM1_PADS) +#define NUM_GPIO_COM2_GPI_REGS NUM_GPIO_COMx_GPI_REGS(NUM_GPIO_COM2_PADS) +#define NUM_GPIO_COM4_GPI_REGS NUM_GPIO_COMx_GPI_REGS(NUM_GPIO_COM4_PADS) +#define NUM_GPIO_COM5_GPI_REGS NUM_GPIO_COMx_GPI_REGS(NUM_GPIO_COM5_PADS) + +#define NUM_GPI_STATUS_REGS \ + ((NUM_GPIO_COM0_GPI_REGS) +\ + (NUM_GPIO_COM1_GPI_REGS) +\ + (NUM_GPIO_COM2_GPI_REGS) +\ + (NUM_GPIO_COM4_GPI_REGS) +\ + (NUM_GPIO_COM5_GPI_REGS)) +/* + * IOxAPIC IRQs for the GPIOs + */ + +/* Group F */ +#define GPP_F0_IRQ 0x40 +#define GPP_F1_IRQ 0x41 +#define GPP_F2_IRQ 0x42 +#define GPP_F3_IRQ 0x43 +#define GPP_F4_IRQ 0x44 +#define GPP_F5_IRQ 0x45 +#define GPP_F6_IRQ 0x46 +#define GPP_F7_IRQ 0x47 +#define GPP_F8_IRQ 0x48 +#define GPP_F9_IRQ 0x49 +#define GPP_F10_IRQ 0x4a +#define GPP_F11_IRQ 0x4b +#define GPP_F12_IRQ 0x4c +#define GPP_F13_IRQ 0x4d +#define GPP_F14_IRQ 0x4e +#define GPP_F15_IRQ 0x4f +#define GPP_F16_IRQ 0x50 +#define GPP_F17_IRQ 0x51 +#define GPP_F18_IRQ 0x52 +#define GPP_F19_IRQ 0x53 + +/* Group G */ +#define GPP_G0_IRQ 0x18 +#define GPP_G1_IRQ 0x19 +#define GPP_G2_IRQ 0x1a +#define GPP_G3_IRQ 0x1b +#define GPP_G4_IRQ 0x1c +#define GPP_G5_IRQ 0x1d +#define GPP_G6_IRQ 0x1e +#define GPP_G7_IRQ 0x1f + +/* Group B */ +#define GPP_B0_IRQ 0x20 +#define GPP_B1_IRQ 0x21 +#define GPP_B2_IRQ 0x22 +#define GPP_B3_IRQ 0x23 +#define GPP_B4_IRQ 0x24 +#define GPP_B5_IRQ 0x25 +#define GPP_B6_IRQ 0x26 +#define GPP_B7_IRQ 0x27 +#define GPP_B8_IRQ 0x28 +#define GPP_B9_IRQ 0x29 +#define GPP_B10_IRQ 0x2a +#define GPP_B11_IRQ 0x2b +#define GPP_B12_IRQ 0x2c +#define GPP_B13_IRQ 0x2d +#define GPP_B14_IRQ 0x2e +#define GPP_B15_IRQ 0x2f +#define GPP_B16_IRQ 0x30 +#define GPP_B17_IRQ 0x31 +#define GPP_B18_IRQ 0x32 +#define GPP_B19_IRQ 0x33 +#define GPP_B20_IRQ 0x34 +#define GPP_B21_IRQ 0x35 +#define GPP_B22_IRQ 0x36 +#define GPP_B23_IRQ 0x37 + +/* Group A */ +#define GPP_A0_IRQ 0x38 +#define GPP_A1_IRQ 0x39 +#define GPP_A2_IRQ 0x3a +#define GPP_A3_IRQ 0x3b +#define GPP_A4_IRQ 0x3c +#define GPP_A5_IRQ 0x3d +#define GPP_A6_IRQ 0x3e +#define GPP_A7_IRQ 0x3f +#define GPP_A8_IRQ 0x40 +#define GPP_A9_IRQ 0x41 +#define GPP_A10_IRQ 0x42 +#define GPP_A11_IRQ 0x43 +#define GPP_A12_IRQ 0x44 +#define GPP_A13_IRQ 0x45 +#define GPP_A14_IRQ 0x46 +#define GPP_A15_IRQ 0x47 +#define GPP_A16_IRQ 0x48 +#define GPP_A17_IRQ 0x49 +#define GPP_A18_IRQ 0x4a +#define GPP_A19_IRQ 0x4b + +/* Group H */ +#define GPP_H0_IRQ 0x70 +#define GPP_H1_IRQ 0x71 +#define GPP_H2_IRQ 0x72 +#define GPP_H3_IRQ 0x73 +#define GPP_H4_IRQ 0x74 +#define GPP_H5_IRQ 0x75 +#define GPP_H6_IRQ 0x76 +#define GPP_H7_IRQ 0x77 +#define GPP_H8_IRQ 0x18 +#define GPP_H9_IRQ 0x19 +#define GPP_H10_IRQ 0x1a +#define GPP_H11_IRQ 0x1b +#define GPP_H12_IRQ 0x1c +#define GPP_H13_IRQ 0x1d +#define GPP_H14_IRQ 0x1e +#define GPP_H15_IRQ 0x1f +#define GPP_H16_IRQ 0x20 +#define GPP_H17_IRQ 0x21 +#define GPP_H18_IRQ 0x22 +#define GPP_H19_IRQ 0x23 +#define GPP_H20_IRQ 0x24 +#define GPP_H21_IRQ 0x25 +#define GPP_H22_IRQ 0x26 +#define GPP_H23_IRQ 0x27 + +/* Group D */ +#define GPP_D0_IRQ 0x28 +#define GPP_D1_IRQ 0x29 +#define GPP_D2_IRQ 0x2a +#define GPP_D3_IRQ 0x2b +#define GPP_D4_IRQ 0x2c +#define GPP_D5_IRQ 0x2d +#define GPP_D6_IRQ 0x2e +#define GPP_D7_IRQ 0x2f +#define GPP_D8_IRQ 0x30 +#define GPP_D9_IRQ 0x31 +#define GPP_D10_IRQ 0x32 +#define GPP_D11_IRQ 0x33 +#define GPP_D12_IRQ 0x34 +#define GPP_D13_IRQ 0x35 +#define GPP_D14_IRQ 0x36 +#define GPP_D15_IRQ 0x37 +#define GPP_D16_IRQ 0x38 +#define GPP_D17_IRQ 0x39 +#define GPP_D18_IRQ 0x3a +#define GPP_D19_IRQ 0x3b +#define GPP_D20_IRQ 0x3c +#define GPP_D21_IRQ 0x3d +#define GPP_D22_IRQ 0x3e +#define GPP_D23_IRQ 0x3f + +/* Group GPD */ +#define GPD0_IRQ 0x64 +#define GPD1_IRQ 0x65 +#define GPD2_IRQ 0x66 +#define GPD3_IRQ 0x67 +#define GPD4_IRQ 0x68 +#define GPD5_IRQ 0x69 +#define GPD6_IRQ 0x6a +#define GPD7_IRQ 0x6b +#define GPD8_IRQ 0x6c +#define GPD9_IRQ 0x6d +#define GPD10_IRQ 0x6e + +/* Group C */ +#define GPP_C0_IRQ 0x5a +#define GPP_C1_IRQ 0x5b +#define GPP_C2_IRQ 0x5c +#define GPP_C3_IRQ 0x5d +#define GPP_C4_IRQ 0x5e +#define GPP_C5_IRQ 0x5f +#define GPP_C6_IRQ 0x60 +#define GPP_C7_IRQ 0x61 +#define GPP_C8_IRQ 0x62 +#define GPP_C9_IRQ 0x63 +#define GPP_C10_IRQ 0x64 +#define GPP_C11_IRQ 0x65 +#define GPP_C12_IRQ 0x66 +#define GPP_C13_IRQ 0x67 +#define GPP_C14_IRQ 0x68 +#define GPP_C15_IRQ 0x69 +#define GPP_C16_IRQ 0x6a +#define GPP_C17_IRQ 0x6b +#define GPP_C18_IRQ 0x6c +#define GPP_C19_IRQ 0x6d +#define GPP_C20_IRQ 0x6e +#define GPP_C21_IRQ 0x6f +#define GPP_C22_IRQ 0x70 +#define GPP_C23_IRQ 0x71 +/* Group E */ +#define GPP_E0_IRQ 0x72 +#define GPP_E1_IRQ 0x73 +#define GPP_E2_IRQ 0x74 +#define GPP_E3_IRQ 0x75 +#define GPP_E4_IRQ 0x76 +#define GPP_E5_IRQ 0x77 +#define GPP_E6_IRQ 0x18 +#define GPP_E7_IRQ 0x19 +#define GPP_E8_IRQ 0x1a +#define GPP_E9_IRQ 0x1b +#define GPP_E10_IRQ 0x1c +#define GPP_E11_IRQ 0x1d +#define GPP_E12_IRQ 0x1e +#define GPP_E13_IRQ 0x1f +#define GPP_E14_IRQ 0x20 +#define GPP_E15_IRQ 0x21 +#define GPP_E16_IRQ 0x22 +#define GPP_E17_IRQ 0x23 +#define GPP_E18_IRQ 0x24 +#define GPP_E19_IRQ 0x25 +#define GPP_E20_IRQ 0x26 +#define GPP_E21_IRQ 0x27 +#define GPP_E22_IRQ 0x28 +#define GPP_E23_IRQ 0x29 + +/* Group R*/ +#define GPP_R0_IRQ 0x50 +#define GPP_R1_IRQ 0x51 +#define GPP_R2_IRQ 0x52 +#define GPP_R3_IRQ 0x53 +#define GPP_R4_IRQ 0x54 +#define GPP_R5_IRQ 0x55 +#define GPP_R6_IRQ 0x56 +#define GPP_R7_IRQ 0x57 + +/* Group S */ +#define GPP_S0_IRQ 0x5c +#define GPP_S1_IRQ 0x5d +#define GPP_S2_IRQ 0x5e +#define GPP_S3_IRQ 0x5f +#define GPP_S4_IRQ 0x60 +#define GPP_S5_IRQ 0x61 +#define GPP_S6_IRQ 0x62 +#define GPP_S7_IRQ 0x63 + +/* Register defines. */ +#define GPIO_MISCCFG 0x10 +#define GPE_DW_SHIFT 8 +#define GPE_DW_MASK 0xfff00 +#define HOSTSW_OWN_REG_0 0xc0 +#define GPI_INT_STS_0 0x100 +#define GPI_INT_EN_0 0x120 +#define GPI_SMI_STS_0 0x180 +#define GPI_SMI_EN_0 0x1a0 +#define PAD_CFG_BASE 0x600 + +#endif diff --git a/src/soc/intel/elkhartlake/include/soc/gpio_soc_defs.h b/src/soc/intel/elkhartlake/include/soc/gpio_soc_defs.h new file mode 100644 index 0000000..25aff18 --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/gpio_soc_defs.h @@ -0,0 +1,347 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef _SOC_JASPERLAKE_GPIO_SOC_DEFS_H_ +#define _SOC_JASPERLAKE_GPIO_SOC_DEFS_H_ + +/* + * Most of the fixed numbers and macros are based on the GPP groups. + * The GPIO groups are accessed through register blocks called + * communities. + */ + +#define GPP_A 0x0 +#define GPP_B 0x1 +#define GPP_G 0x2 +#define GPP_C 0x3 +#define GPP_R 0x4 +#define GPP_D 0x5 +#define GPP_S 0x6 +#define GPP_H 0x7 +#define GPP_VGPIO 0x8 +#define GPP_F 0x9 +#define GPP_GPD 0xA +#define GPP_E 0xD + +#define GPIO_NUM_GROUPS 12 +#define GPIO_MAX_NUM_PER_GROUP 24 + +/* + * GPIOs are ordered monotonically increasing to match ACPI/OS driver. + */ + +/* Group F */ +#define GPP_F0 0 +#define GPP_F1 1 +#define GPP_F2 2 +#define GPP_F3 3 +#define GPP_F4 4 +#define GPP_F5 5 +#define GPP_F6 6 +#define GPP_F7 7 +#define GPP_F8 8 +#define GPP_F9 9 +#define GPP_F10 10 +#define GPP_F11 11 +#define GPP_F12 12 +#define GPP_F13 13 +#define GPP_F14 14 +#define GPP_F15 15 +#define GPP_F16 16 +#define GPP_F17 17 +#define GPP_F18 18 +#define GPP_F19 19 + +/* Group B */ +#define GPIO_RSVD_0 20 +#define GPIO_RSVD_1 21 +#define GPIO_RSVD_2 22 +#define GPIO_RSVD_3 23 +#define GPIO_RSVD_4 24 +#define GPIO_RSVD_5 25 +#define GPIO_RSVD_6 26 +#define GPIO_RSVD_7 27 +#define GPIO_RSVD_8 28 +#define GPP_B0 29 +#define GPP_B1 30 +#define GPP_B2 31 +#define GPP_B3 32 +#define GPP_B4 33 +#define GPP_B5 34 +#define GPP_B6 35 +#define GPP_B7 36 +#define GPP_B8 37 +#define GPP_B9 38 +#define GPP_B10 39 +#define GPP_B11 40 +#define GPP_B12 41 +#define GPP_B13 42 +#define GPP_B14 43 +#define GPP_B15 44 +#define GPP_B16 45 +#define GPP_B17 46 +#define GPP_B18 47 +#define GPP_B19 48 +#define GPP_B20 49 +#define GPP_B21 50 +#define GPP_B22 51 +#define GPP_B23 52 +#define GPIO_RSVD_9 53 +#define GPIO_RSVD_10 54 + +/* Group A */ +#define GPP_A0 55 +#define GPP_A1 56 +#define GPP_A2 57 +#define GPP_A3 58 +#define GPP_A4 59 +#define GPP_A5 60 +#define GPP_A6 61 +#define GPP_A7 62 +#define GPP_A8 63 +#define GPP_A9 64 +#define GPP_A10 65 +#define GPP_A11 66 +#define GPP_A12 67 +#define GPP_A13 68 +#define GPP_A14 69 +#define GPP_A15 70 +#define GPP_A16 71 +#define GPP_A17 72 +#define GPP_A18 73 +#define GPP_A19 74 +#define GPIO_RSVD_11 75 + +/* Group S */ +#define GPP_S0 76 +#define GPP_S1 77 +#define GPP_S2 78 +#define GPP_S3 79 +#define GPP_S4 80 +#define GPP_S5 81 +#define GPP_S6 82 +#define GPP_S7 83 + +/* Group R */ +#define GPP_R0 84 +#define GPP_R1 85 +#define GPP_R2 86 +#define GPP_R3 87 +#define GPP_R4 88 +#define GPP_R5 89 +#define GPP_R6 90 +#define GPP_R7 91 + +#define GPIO_COM0_START GPP_F0 +#define GPIO_COM0_END GPP_R7 +#define NUM_GPIO_COM0_PADS (GPIO_COM0_END - GPIO_COM0_START + 1) + +/* Group H */ +#define GPP_H0 92 +#define GPP_H1 93 +#define GPP_H2 94 +#define GPP_H3 95 +#define GPP_H4 96 +#define GPP_H5 97 +#define GPP_H6 98 +#define GPP_H7 99 +#define GPP_H8 100 +#define GPP_H9 101 +#define GPP_H10 102 +#define GPP_H11 103 +#define GPP_H12 104 +#define GPP_H13 105 +#define GPP_H14 106 +#define GPP_H15 107 +#define GPP_H16 108 +#define GPP_H17 109 +#define GPP_H18 110 +#define GPP_H19 111 +#define GPP_H20 112 +#define GPP_H21 113 +#define GPP_H22 114 +#define GPP_H23 115 + +/* Group D */ +#define GPP_D0 116 +#define GPP_D1 117 +#define GPP_D2 118 +#define GPP_D3 119 +#define GPP_D4 120 +#define GPP_D5 121 +#define GPP_D6 122 +#define GPP_D7 123 +#define GPP_D8 124 +#define GPP_D9 125 +#define GPP_D10 126 +#define GPP_D11 127 +#define GPP_D12 128 +#define GPP_D13 129 +#define GPP_D14 130 +#define GPP_D15 131 +#define GPP_D16 132 +#define GPP_D17 133 +#define GPP_D18 134 +#define GPP_D19 135 +#define GPP_D20 136 +#define GPP_D21 137 +#define GPP_D22 138 +#define GPP_D23 139 +#define GPIO_RSVD_12 140 +#define GPIO_RSVD_13 141 + +/* Group VGPIO */ +#define VGPIO_0 142 +#define VGPIO_3 143 +#define VGPIO_4 144 +#define VGPIO_5 145 +#define VGPIO_6 146 +#define VGPIO_7 147 +#define VGPIO_8 148 +#define VGPIO_9 149 +#define VGPIO_10 150 +#define VGPIO_11 151 +#define VGPIO_12 152 +#define VGPIO_13 153 +#define VGPIO_18 154 +#define VGPIO_19 155 +#define VGPIO_20 156 +#define VGPIO_21 157 +#define VGPIO_22 158 +#define VGPIO_23 159 +#define VGPIO_24 160 +#define VGPIO_25 161 +#define VGPIO_30 162 +#define VGPIO_31 163 +#define VGPIO_32 164 +#define VGPIO_33 165 +#define VGPIO_34 166 +#define VGPIO_35 167 +#define VGPIO_36 168 +#define VGPIO_37 169 +#define VGPIO_39 170 + +/* Group C */ +#define GPP_C0 171 +#define GPP_C1 172 +#define GPP_C2 173 +#define GPP_C3 174 +#define GPP_C4 175 +#define GPP_C5 176 +#define GPP_C6 177 +#define GPP_C7 178 +#define GPP_C8 179 +#define GPP_C9 180 +#define GPP_C10 181 +#define GPP_C11 182 +#define GPP_C12 183 +#define GPP_C13 184 +#define GPP_C14 185 +#define GPP_C15 186 +#define GPP_C16 187 +#define GPP_C17 188 +#define GPP_C18 189 +#define GPP_C19 190 +#define GPP_C20 191 +#define GPP_C21 192 +#define GPP_C22 193 +#define GPP_C23 194 + +#define GPIO_COM1_START GPP_H0 +#define GPIO_COM1_END GPP_C23 +#define NUM_GPIO_COM1_PADS (GPIO_COM1_END - GPIO_COM1_START + 1) + +/* Group GPD */ +#define GPD0 195 +#define GPD1 196 +#define GPD2 197 +#define GPD3 198 +#define GPD4 199 +#define GPD5 200 +#define GPD6 201 +#define GPD7 202 +#define GPD8 203 +#define GPD9 204 +#define GPD10 205 +#define GPIO_RSVD_14 206 +#define GPIO_RSVD_15 207 +#define GPIO_RSVD_16 208 +#define GPIO_RSVD_17 209 + +#define GPIO_COM2_START GPD0 +#define GPIO_COM2_END GPIO_RSVD_17 +#define NUM_GPIO_COM2_PADS (GPIO_COM2_END - GPIO_COM2_START + 1) + +/* Group E */ +#define GPIO_RSVD_18 210 +#define GPIO_RSVD_19 211 +#define GPIO_RSVD_20 212 +#define GPIO_RSVD_21 213 +#define GPIO_RSVD_22 214 +#define GPIO_RSVD_23 215 +#define GPP_E0 216 +#define GPP_E1 217 +#define GPP_E2 218 +#define GPP_E3 219 +#define GPP_E4 220 +#define GPP_E5 221 +#define GPP_E6 222 +#define GPP_E7 223 +#define GPP_E8 224 +#define GPP_E9 225 +#define GPP_E10 226 +#define GPP_E11 227 +#define GPP_E12 228 +#define GPP_E13 229 +#define GPP_E14 230 +#define GPP_E15 231 +#define GPP_E16 232 +#define GPP_E17 233 +#define GPP_E18 234 +#define GPP_E19 235 +#define GPP_E20 236 +#define GPP_E21 237 +#define GPP_E22 238 +#define GPP_E23 239 +#define GPIO_RSVD_24 240 +#define GPIO_RSVD_25 241 +#define GPIO_RSVD_26 242 +#define GPIO_RSVD_27 243 +#define GPIO_RSVD_28 244 +#define GPIO_RSVD_29 245 +#define GPIO_RSVD_30 246 +#define GPIO_RSVD_31 247 +#define GPIO_RSVD_32 248 +#define GPIO_RSVD_33 249 +#define GPIO_RSVD_34 250 +#define GPIO_RSVD_35 251 +#define GPIO_RSVD_36 252 + +#define GPIO_COM4_START GPIO_RSVD_18 +#define GPIO_COM4_END GPIO_RSVD_36 +#define NUM_GPIO_COM4_PADS (GPIO_COM4_END - GPIO_COM4_START + 1) + +/* Group G */ +#define GPP_G0 253 +#define GPP_G1 254 +#define GPP_G2 255 +#define GPP_G3 256 +#define GPP_G4 257 +#define GPP_G5 258 +#define GPP_G6 259 +#define GPP_G7 260 + +#define GPIO_COM5_START GPP_G0 +#define GPIO_COM5_END GPP_G7 +#define NUM_GPIO_COM5_PADS (GPIO_COM5_END - GPIO_COM5_START + 1) + +#define TOTAL_PADS 261 + +#define COMM_0 0 +#define COMM_1 1 +#define COMM_2 2 +#define COMM_4 3 +#define COMM_5 4 +#define TOTAL_GPIO_COMM 5 + +#endif diff --git a/src/soc/intel/elkhartlake/include/soc/iomap.h b/src/soc/intel/elkhartlake/include/soc/iomap.h new file mode 100644 index 0000000..2d92fc9 --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/iomap.h @@ -0,0 +1,100 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef _SOC_JASPERLAKE_IOMAP_H_ +#define _SOC_JASPERLAKE_IOMAP_H_ + +/* + * Memory-mapped I/O registers. + */ +#define MCFG_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS +#define MCFG_BASE_SIZE 0x4000000 + +#define PCH_PRESERVED_BASE_ADDRESS 0xfc800000 +#define PCH_PRESERVED_BASE_SIZE 0x02000000 + +#define PCH_TRACE_HUB_BASE_ADDRESS 0xfc800000 +#define PCH_TRACE_HUB_BASE_SIZE 0x00800000 + +#define UART_BASE_SIZE 0x1000 + +#define UART_BASE_0_ADDRESS 0xfe03e000 +/* Both UART BAR 0 and 1 are 4KB in size */ +#define UART_BASE_0_ADDR(x) (UART_BASE_0_ADDRESS + (2 * \ + UART_BASE_SIZE * (x))) +#define UART_BASE(x) UART_BASE_0_ADDR(x) + +#define DMI_BASE_ADDRESS 0xfeda0000 +#define DMI_BASE_SIZE 0x1000 + +#define EP_BASE_ADDRESS 0xfeda1000 +#define EP_BASE_SIZE 0x1000 + +#define EDRAM_BASE_ADDRESS 0xfed80000 +#define EDRAM_BASE_SIZE 0x4000 + +#define TBT0_BASE_ADDRESS 0xfed84000 +#define TBT0_BASE_SIZE 0x1000 + +#define TBT1_BASE_ADDRESS 0xfed85000 +#define TBT1_BASE_SIZE 0x1000 + +#define TBT2_BASE_ADDRESS 0xfed86000 +#define TBT2_BASE_SIZE 0x1000 + +#define TBT3_BASE_ADDRESS 0xfed87000 +#define TBT3_BASE_SIZE 0x1000 + +#define GFXVT_BASE_ADDRESS 0xfed90000 +#define GFXVT_BASE_SIZE 0x1000 + +#define IPUVT_BASE_ADDRESS 0xfed92000 +#define IPUVT_BASE_SIZE 0x1000 + +#define VTVC0_BASE_ADDRESS 0xfed91000 +#define VTVC0_BASE_SIZE 0x1000 + +#define REG_BASE_ADDRESS 0xfb000000 +#define REG_BASE_SIZE 0x1000 + +#define HPET_BASE_ADDRESS 0xfed00000 + +#define PCH_PWRM_BASE_ADDRESS 0xfe000000 +#define PCH_PWRM_BASE_SIZE 0x10000 + +#define SPI_BASE_ADDRESS 0xfe010000 + +#define GPIO_BASE_SIZE 0x10000 + +#define HECI1_BASE_ADDRESS 0xfeda2000 + +#define VTD_BASE_ADDRESS 0xfed90000 +#define VTD_BASE_SIZE 0x00004000 + +#define ABOVE_4GB_MEM_BASE_ADDRESS (256ULL * GiB) +#define ABOVE_4GB_MEM_BASE_SIZE (256ULL * GiB) + +#define MCH_BASE_ADDRESS 0xfea80000 +#define MCH_BASE_SIZE 0x8000 + +#define EARLY_GSPI_BASE_ADDRESS 0xfe011000 + +#define EARLY_I2C_BASE_ADDRESS 0xfe040000 +#define EARLY_I2C_BASE(x) (EARLY_I2C_BASE_ADDRESS + (0x1000 * (x))) + +/* + * I/O port address space + */ +#define SMBUS_BASE_ADDRESS 0x0efa0 +#define SMBUS_BASE_SIZE 0x20 + +#define ACPI_BASE_ADDRESS 0x1800 +#define ACPI_BASE_SIZE 0x100 + +#define TCO_BASE_ADDRESS 0x400 +#define TCO_BASE_SIZE 0x20 + +#define P2SB_BAR CONFIG_PCR_BASE_ADDRESS +#define P2SB_SIZE (16 * MiB) + +#endif diff --git a/src/soc/intel/elkhartlake/include/soc/irq.h b/src/soc/intel/elkhartlake/include/soc/irq.h new file mode 100644 index 0000000..4aca1b7 --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/irq.h @@ -0,0 +1,75 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef _SOC_JSL_IRQ_H_ +#define _SOC_JSL_IRQ_H_ + +#define GPIO_IRQ14 14 +#define GPIO_IRQ15 15 + +#define PCH_IRQ10 10 +#define PCH_IRQ11 11 + +/* LPSS Devices */ +#define LPSS_I2C0_IRQ 16 +#define LPSS_I2C1_IRQ 17 +#define LPSS_I2C2_IRQ 18 +#define LPSS_I2C3_IRQ 19 +#define LPSS_I2C4_IRQ 32 +#define LPSS_I2C5_IRQ 33 +#define LPSS_SPI0_IRQ 22 +#define LPSS_SPI1_IRQ 23 +#define LPSS_SPI2_IRQ 24 +#define LPSS_UART0_IRQ 20 +#define LPSS_UART1_IRQ 21 +#define LPSS_UART2_IRQ 34 + +/* PCI D:31 F:x */ +#define cAVS_INTA_IRQ 16 +#define SMBUS_INTA_IRQ 16 +#define SMBUS_INTB_IRQ 17 +#define GbE_INTA_IRQ 16 +#define GbE_INTC_IRQ 18 +#define TRACE_HUB_INTA_IRQ 16 +#define TRACE_HUB_INTD_IRQ 19 + +/* PCI D:28 F:x */ +#define PCIE_1_IRQ 16 +#define PCIE_2_IRQ 17 +#define PCIE_3_IRQ 18 +#define PCIE_4_IRQ 19 +#define PCIE_5_IRQ 16 +#define PCIE_6_IRQ 17 +#define PCIE_7_IRQ 18 +#define PCIE_8_IRQ 19 + +/* PCI D:26 F:x */ +#define eMMC_IRQ 16 + +/* PCI D:23 F:x */ +#define SATA_IRQ 16 + +/* PCI D:22 F:x */ +#define HECI_1_IRQ 16 +#define HECI_2_IRQ 17 +#define HECI_3_IRQ 16 +#define HECI_4_IRQ 19 +#define IDER_IRQ 18 +#define KT_IRQ 19 + +/* PCI D:20 F:x */ +#define XHCI_IRQ 16 +#define OTG_IRQ 17 +#define CNViWIFI_IRQ 16 +#define SD_IRQ 19 +#define PMC_SRAM_IRQ 18 + +/* PCI D:18 F:x */ +#define UFS_IRQ 16 + +#define IGFX_IRQ 16 +#define SA_THERMAL_IRQ 16 +#define IPU_IRQ 16 +#define GNA_IRQ 16 + +#endif /* _JSL_IRQ_H_ */ diff --git a/src/soc/intel/elkhartlake/include/soc/itss.h b/src/soc/intel/elkhartlake/include/soc/itss.h new file mode 100644 index 0000000..2065a2b --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/itss.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef SOC_INTEL_JSL_ITSS_H +#define SOC_INTEL_JSL_ITSS_H + +#define GPIO_IRQ_START 50 +#define GPIO_IRQ_END ITSS_MAX_IRQ + +#define ITSS_MAX_IRQ 119 +#define IRQS_PER_IPC 32 +#define NUM_IPC_REGS ((ITSS_MAX_IRQ + IRQS_PER_IPC - 1)/IRQS_PER_IPC) + +#endif /* SOC_INTEL_JSL_ITSS_H */ diff --git a/src/soc/intel/elkhartlake/include/soc/me.h b/src/soc/intel/elkhartlake/include/soc/me.h new file mode 100644 index 0000000..1ca89d2 --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/me.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef _JASPERLAKE_ME_H_ +#define _JASPERLAKE_ME_H_ + +/* ME Host Firmware Status register 1 */ +union me_hfsts1 { + u32 data; + struct { + u32 working_state: 4; + u32 spi_protection_mode: 1; + u32 fpt_bad: 1; + u32 operation_state: 3; + u32 fw_init_complete: 1; + u32 ft_bup_ld_flr: 1; + u32 update_in_progress: 1; + u32 error_code: 4; + u32 operation_mode: 4; + u32 reset_count: 4; + u32 boot_options_present: 1; + u32 invoke_enhance_dbg_mode: 1; + u32 bist_test_state: 1; + u32 bist_reset_request: 1; + u32 current_power_source: 2; + u32 reserved: 1; + u32 d0i3_support_valid: 1; + } __packed fields; +}; + +/* ME Host Firmware Status Register 3 */ +union me_hfsts3 { + u32 data; + struct { + u32 reserved_0: 4; + u32 fw_sku: 3; + u32 reserved_7: 2; + u32 reserved_9: 2; + u32 resered_11: 3; + u32 resered_14: 16; + u32 reserved_30: 2; + } __packed fields; +}; +#endif /* _JASPERLAKE_ME_H_ */ diff --git a/src/soc/intel/elkhartlake/include/soc/meminit.h b/src/soc/intel/elkhartlake/include/soc/meminit.h new file mode 100644 index 0000000..abcf899 --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/meminit.h @@ -0,0 +1,113 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef _SOC_JASPERLAKE_MEMINIT_H_ +#define _SOC_JASPERLAKE_MEMINIT_H_ + +#include <types.h> +#include <fsp/soc_binding.h> + +/* Number of dq bits controlled per dqs */ +#define DQ_BITS_PER_DQS 8 + +/* Number of memory packages, where a "package" represents a 64-bit solution */ +#define DDR_NUM_PACKAGES 2 + +/* Number of DQ byte mappings */ +#define DDR_NUM_BYTE_MAPPINGS 6 + +/* Number of memory DIMM slots available on Jasper Lake */ +#define NUM_DIMM_SLOT 4 + +/* 64-bit Channel identification */ +enum { + DDR_CH0, + DDR_CH1, + DDR_NUM_CHANNELS +}; + +struct spd_by_pointer { + size_t spd_data_len; + uintptr_t spd_data_ptr; +}; + +enum mem_info_read_type { + READ_SPD_CBFS, /* Find SPD file in CBFS. */ + READ_SMBUS, /* Read on-module SPD by SMBUS. */ + READ_SPD_MEMPTR /* Find SPD data from pointer. */ +}; + +struct spd_info { + enum mem_info_read_type read_type; + union spd_data_by { + /* To read on-module SPD when read_type is READ_SMBUS. */ + uint8_t spd_smbus_address[NUM_DIMM_SLOT]; + + /* To identify SPD file when read_type is READ_SPD_CBFS. */ + int spd_index; + + /* To find SPD data when read_type is READ_SPD_MEMPTR. */ + struct spd_by_pointer spd_data_ptr_info; + } spd_spec; +}; + +/* Board-specific memory dq mapping information */ +struct mb_cfg { + + /* + * For each channel, there are 6 sets of DQ byte mappings, + * where each set has a package 0 and a package 1 value (package 0 + * represents the first 64-bit lpddr4 chip combination, and package 1 + * represents the second 64-bit lpddr4 chip combination). + * The first three sets are for CLK, CMD, and CTL. + * The fsp package actually expects 6 sets, even though the last 3 sets + * are not used in JSL. + * We let the meminit_dq_dqs_map routine take care of clearing the + * unused fields for the caller. + * Note that dq_map is only used by LPDDR; it does not need to be + * initialized for designs using DDR4. + */ + uint8_t dq_map[DDR_NUM_CHANNELS][DDR_NUM_BYTE_MAPPINGS][DDR_NUM_PACKAGES]; + + /* + * DQS CPU<>DRAM map Ch0 and Ch1. Each array entry represents a + * mapping of a dq bit on the CPU to the bit it's connected to on + * the memory part. The array index represents the dqs bit number + * on the memory part, and the values in the array represent which + * pin on the CPU that DRAM pin connects to. + * dqs_map is only used by LPDDR; same comments apply as for dq_map + * above. + */ + uint8_t dqs_map[DDR_NUM_CHANNELS][DQ_BITS_PER_DQS]; + + /* + * Rcomp resistor values. These values represent the resistance in + * ohms of the three rcomp resistors attached to the DDR_COMP_0, + * DDR_COMP_1, and DDR_COMP_2 pins on the DRAM. + */ + uint16_t rcomp_resistor[3]; + + /* + * Rcomp target values. These will typically be the following + * values for Jasper Lake : { 80, 40, 40, 40, 30 } + */ + uint16_t rcomp_targets[5]; + + /* + * Early Command Training Enable/Disable Control + * 1 = enable, 0 = disable + */ + uint8_t ect; + + /* Board type */ + uint8_t UserBd; +}; + +/* + * Initialize default memory configurations for Jasper Lake. + */ + +void memcfg_init(FSP_M_CONFIG *mem_cfg, const struct mb_cfg *board_cfg, + const struct spd_info *spd_info, bool half_populated); + +#endif /* _SOC_JASPERLAKE_MEMINIT_H_ */ diff --git a/src/soc/intel/elkhartlake/include/soc/msr.h b/src/soc/intel/elkhartlake/include/soc/msr.h new file mode 100644 index 0000000..3bbf99d --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/msr.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef _SOC_MSR_H_ +#define _SOC_MSR_H_ + +#include <intelblocks/msr.h> + +#define MSR_PIC_MSG_CONTROL 0x2e +#define MSR_VR_MISC_CONFIG2 0x636 + +#endif diff --git a/src/soc/intel/elkhartlake/include/soc/nvs.h b/src/soc/intel/elkhartlake/include/soc/nvs.h new file mode 100644 index 0000000..d059b00 --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/nvs.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef _SOC_NVS_H_ +#define _SOC_NVS_H_ + +#include <intelblocks/nvs.h> + +#endif diff --git a/src/soc/intel/elkhartlake/include/soc/p2sb.h b/src/soc/intel/elkhartlake/include/soc/p2sb.h new file mode 100644 index 0000000..ae72b9d --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/p2sb.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef _SOC_JASPERLAKE_P2SB_H_ +#define _SOC_JASPERLAKE_P2SB_H_ + +#define HPTC_OFFSET 0x60 +#define HPTC_ADDR_ENABLE_BIT (1 << 7) + +#define PCH_P2SB_EPMASK0 0x220 + +#endif diff --git a/src/soc/intel/elkhartlake/include/soc/pch.h b/src/soc/intel/elkhartlake/include/soc/pch.h new file mode 100644 index 0000000..9d8df21 --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/pch.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef _SOC_JASPERLAKE_PCH_H_ +#define _SOC_JASPERLAKE_PCH_H_ + +#include <stdint.h> + +#define PCIE_CLK_NOTUSED 0xFF +#define PCIE_CLK_LAN 0x70 +#define PCIE_CLK_FREE 0x80 + +#endif diff --git a/src/soc/intel/elkhartlake/include/soc/pci_devs.h b/src/soc/intel/elkhartlake/include/soc/pci_devs.h new file mode 100644 index 0000000..a3b938f --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/pci_devs.h @@ -0,0 +1,193 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef _SOC_JASPERLAKE_PCI_DEVS_H_ +#define _SOC_JASPERLAKE_PCI_DEVS_H_ + +#include <device/pci_def.h> + +#define _PCH_DEVFN(slot, func) PCI_DEVFN(PCH_DEV_SLOT_ ## slot, func) + +#if !defined(__SIMPLE_DEVICE__) +#include <device/device.h> +#define _PCH_DEV(slot, func) pcidev_path_on_root_debug(_PCH_DEVFN(slot, func), __func__) +#else +#define _PCH_DEV(slot, func) PCI_DEV(0, PCH_DEV_SLOT_ ## slot, func) +#endif + +/* System Agent Devices */ + +#define SA_DEV_SLOT_ROOT 0x00 +#define SA_DEVFN_ROOT PCI_DEVFN(SA_DEV_SLOT_ROOT, 0) +#if defined(__SIMPLE_DEVICE__) +#define SA_DEV_ROOT PCI_DEV(0, SA_DEV_SLOT_ROOT, 0) +#endif + +#define SA_DEV_SLOT_IGD 0x02 +#define SA_DEVFN_IGD PCI_DEVFN(SA_DEV_SLOT_IGD, 0) +#define SA_DEV_IGD PCI_DEV(0, SA_DEV_SLOT_IGD, 0) + +#define SA_DEV_SLOT_DPTF 0x04 +#define SA_DEVFN_DPTF PCI_DEVFN(SA_DEV_SLOT_DPTF, 0) +#define SA_DEV_DPTF PCI_DEV(0, SA_DEV_SLOT_DPTF, 0) + +#define SA_DEV_SLOT_TBT 0x07 +#define SA_DEVFN_TBT0 PCI_DEVFN(SA_DEV_SLOT_TBT, 0) +#define SA_DEVFN_TBT1 PCI_DEVFN(SA_DEV_SLOT_TBT, 1) +#define SA_DEVFN_TBT2 PCI_DEVFN(SA_DEV_SLOT_TBT, 2) +#define SA_DEVFN_TBT3 PCI_DEVFN(SA_DEV_SLOT_TBT, 3) +#define SA_DEV_TBT0 PCI_DEV(0, SA_DEV_SLOT_TBT, 0) +#define SA_DEV_TBT1 PCI_DEV(0, SA_DEV_SLOT_TBT, 1) +#define SA_DEV_TBT2 PCI_DEV(0, SA_DEV_SLOT_TBT, 2) +#define SA_DEV_TBT3 PCI_DEV(0, SA_DEV_SLOT_TBT, 3) + +#define SA_DEV_SLOT_IPU 0x05 +#define SA_DEVFN_IPU PCI_DEVFN(SA_DEV_SLOT_IPU, 0) +#define SA_DEV_IPU PCI_DEV(0, SA_DEV_SLOT_IPU, 0) + +/* PCH Devices */ +#define PCH_DEV_SLOT_SIO0 0x10 +#define PCH_DEVFN_CNVI_BT _PCH_DEVFN(SIO0, 2) +#define PCH_DEVFN_THC0 _PCH_DEVFN(SIO0, 6) +#define PCH_DEVFN_THC1 _PCH_DEVFN(SIO0, 7) +#define PCH_DEV_CNVI_BT _PCH_DEV(SIO0, 2) +#define PCH_DEV_THC0 _PCH_DEV(SIO0, 6) +#define PCH_DEV_THC1 _PCH_DEV(SIO0, 7) + +#define PCH_DEV_SLOT_SIO1 0x11 +#define PCH_DEVFN_UART3 _PCH_DEVFN(SIO1, 0) +#define PCH_DEV_UART3 _PCH_DEV(SIO1, 0) + +#define PCH_DEV_SLOT_ISH 0x12 +#define PCH_DEVFN_ISH _PCH_DEVFN(ISH, 0) +#define PCH_DEVFN_GSPI2 _PCH_DEVFN(ISH, 6) +#define PCH_DEV_ISH _PCH_DEV(ISH, 0) +#define PCH_DEV_GSPI2 _PCH_DEV(ISH, 6) + +#define PCH_DEV_SLOT_SIO2 0x13 +#define PCH_DEVFN_GSPI3 _PCH_DEVFN(SIO2, 0) +#define PCH_DEV_GSPI3 _PCH_DEV(SIO2, 0) + +#define PCH_DEV_SLOT_XHCI 0x14 +#define PCH_DEVFN_XHCI _PCH_DEVFN(XHCI, 0) +#define PCH_DEVFN_USBOTG _PCH_DEVFN(XHCI, 1) +#define PCH_DEVFN_SRAM _PCH_DEVFN(XHCI, 2) +#define PCH_DEVFN_CNVI_WIFI _PCH_DEVFN(XHCI, 3) +#define PCH_DEV_XHCI _PCH_DEV(XHCI, 0) +#define PCH_DEV_USBOTG _PCH_DEV(XHCI, 1) +#define PCH_DEV_SRAM _PCH_DEV(XHCI, 2) +#define PCH_DEV_CNVI_WIFI _PCH_DEV(XHCI, 3) +#define PCH_DEVFN_SDCARD _PCH_DEVFN(XHCI, 5) +#define PCH_DEV_SDCARD _PCH_DEV(XHCI, 5) + +#define PCH_DEV_SLOT_SIO3 0x15 +#define PCH_DEVFN_I2C0 _PCH_DEVFN(SIO3, 0) +#define PCH_DEVFN_I2C1 _PCH_DEVFN(SIO3, 1) +#define PCH_DEVFN_I2C2 _PCH_DEVFN(SIO3, 2) +#define PCH_DEVFN_I2C3 _PCH_DEVFN(SIO3, 3) +#define PCH_DEV_I2C0 _PCH_DEV(SIO3, 0) +#define PCH_DEV_I2C1 _PCH_DEV(SIO3, 1) +#define PCH_DEV_I2C2 _PCH_DEV(SIO3, 2) +#define PCH_DEV_I2C3 _PCH_DEV(SIO3, 3) + +#define PCH_DEV_SLOT_CSE 0x16 +#define PCH_DEVFN_CSE _PCH_DEVFN(CSE, 0) +#define PCH_DEVFN_CSE_2 _PCH_DEVFN(CSE, 1) +#define PCH_DEVFN_CSE_IDER _PCH_DEVFN(CSE, 2) +#define PCH_DEVFN_CSE_KT _PCH_DEVFN(CSE, 3) +#define PCH_DEVFN_CSE_3 _PCH_DEVFN(CSE, 4) +#define PCH_DEVFN_CSE_4 _PCH_DEVFN(CSE, 5) +#define PCH_DEV_CSE _PCH_DEV(CSE, 0) +#define PCH_DEV_CSE_2 _PCH_DEV(CSE, 1) +#define PCH_DEV_CSE_IDER _PCH_DEV(CSE, 2) +#define PCH_DEV_CSE_KT _PCH_DEV(CSE, 3) +#define PCH_DEV_CSE_3 _PCH_DEV(CSE, 4) +#define PCH_DEV_CSE_4 _PCH_DEV(CSE, 5) + +#define PCH_DEV_SLOT_SATA 0x17 +#define PCH_DEVFN_SATA _PCH_DEVFN(SATA, 0) +#define PCH_DEV_SATA _PCH_DEV(SATA, 0) + +#define PCH_DEV_SLOT_SIO4 0x19 +#define PCH_DEVFN_I2C4 _PCH_DEVFN(SIO4, 0) +#define PCH_DEVFN_I2C5 _PCH_DEVFN(SIO4, 1) +#define PCH_DEVFN_UART2 _PCH_DEVFN(SIO4, 2) +#define PCH_DEV_I2C4 _PCH_DEV(SIO4, 0) +#define PCH_DEV_I2C5 _PCH_DEV(SIO4, 1) +#define PCH_DEV_UART2 _PCH_DEV(SIO4, 2) + +#define PCH_DEV_SLOT_STORAGE 0x1a +#define PCH_DEVFN_EMMC _PCH_DEVFN(STORAGE, 0) +#define PCH_DEV_EMMC _PCH_DEV(STORAGE, 0) + +#define PCH_DEV_SLOT_PCIE 0x1c +#define PCH_DEVFN_PCIE1 _PCH_DEVFN(PCIE, 0) +#define PCH_DEVFN_PCIE2 _PCH_DEVFN(PCIE, 1) +#define PCH_DEVFN_PCIE3 _PCH_DEVFN(PCIE, 2) +#define PCH_DEVFN_PCIE4 _PCH_DEVFN(PCIE, 3) +#define PCH_DEVFN_PCIE5 _PCH_DEVFN(PCIE, 4) +#define PCH_DEVFN_PCIE6 _PCH_DEVFN(PCIE, 5) +#define PCH_DEVFN_PCIE7 _PCH_DEVFN(PCIE, 6) +#define PCH_DEVFN_PCIE8 _PCH_DEVFN(PCIE, 7) +#define PCH_DEV_PCIE1 _PCH_DEV(PCIE, 0) +#define PCH_DEV_PCIE2 _PCH_DEV(PCIE, 1) +#define PCH_DEV_PCIE3 _PCH_DEV(PCIE, 2) +#define PCH_DEV_PCIE4 _PCH_DEV(PCIE, 3) +#define PCH_DEV_PCIE5 _PCH_DEV(PCIE, 4) +#define PCH_DEV_PCIE6 _PCH_DEV(PCIE, 5) +#define PCH_DEV_PCIE7 _PCH_DEV(PCIE, 6) +#define PCH_DEV_PCIE8 _PCH_DEV(PCIE, 7) + +#define PCH_DEV_SLOT_PCIE_1 0x1d +#define PCH_DEVFN_PCIE9 _PCH_DEVFN(PCIE_1, 0) +#define PCH_DEVFN_PCIE10 _PCH_DEVFN(PCIE_1, 1) +#define PCH_DEVFN_PCIE11 _PCH_DEVFN(PCIE_1, 2) +#define PCH_DEVFN_PCIE12 _PCH_DEVFN(PCIE_1, 3) +#define PCH_DEV_PCIE9 _PCH_DEV(PCIE_1, 0) +#define PCH_DEV_PCIE10 _PCH_DEV(PCIE_1, 1) +#define PCH_DEV_PCIE11 _PCH_DEV(PCIE_1, 2) +#define PCH_DEV_PCIE12 _PCH_DEV(PCIE_1, 3) + +#define PCH_DEV_SLOT_SIO5 0x1e +#define PCH_DEVFN_UART0 _PCH_DEVFN(SIO5, 0) +#define PCH_DEVFN_UART1 _PCH_DEVFN(SIO5, 1) +#define PCH_DEVFN_GSPI0 _PCH_DEVFN(SIO5, 2) +#define PCH_DEVFN_GSPI1 _PCH_DEVFN(SIO5, 3) +#define PCH_DEV_UART0 _PCH_DEV(SIO5, 0) +#define PCH_DEV_UART1 _PCH_DEV(SIO5, 1) +#define PCH_DEV_GSPI0 _PCH_DEV(SIO5, 2) +#define PCH_DEV_GSPI1 _PCH_DEV(SIO5, 3) + +#define PCH_DEV_SLOT_ESPI 0x1f +#define PCH_DEV_SLOT_LPC PCH_DEV_SLOT_ESPI +#define PCH_DEVFN_ESPI _PCH_DEVFN(ESPI, 0) +#define PCH_DEVFN_P2SB _PCH_DEVFN(ESPI, 1) +#define PCH_DEVFN_PMC _PCH_DEVFN(ESPI, 2) +#define PCH_DEVFN_HDA _PCH_DEVFN(ESPI, 3) +#define PCH_DEVFN_SMBUS _PCH_DEVFN(ESPI, 4) +#define PCH_DEVFN_SPI _PCH_DEVFN(ESPI, 5) +#define PCH_DEVFN_GBE _PCH_DEVFN(ESPI, 6) +#define PCH_DEVFN_TRACEHUB _PCH_DEVFN(ESPI, 7) +#define PCH_DEV_ESPI _PCH_DEV(ESPI, 0) +#define PCH_DEV_LPC PCH_DEV_ESPI +#define PCH_DEV_P2SB _PCH_DEV(ESPI, 1) + +#if !ENV_RAMSTAGE +/* + * PCH_DEV_PMC is intentionally not defined in RAMSTAGE since PMC device gets + * hidden from PCI bus after call to FSP-S. This leads to resource allocator + * dropping it from the root bus as unused device. All references to PCH_DEV_PMC + * would then return NULL and can go unnoticed if not handled properly. Since, + * this device does not have any special chip config associated with it, it is + * okay to not provide the definition for it in ramstage. + */ +#define PCH_DEV_PMC _PCH_DEV(ESPI, 2) +#endif + +#define PCH_DEV_HDA _PCH_DEV(ESPI, 3) +#define PCH_DEV_SMBUS _PCH_DEV(ESPI, 4) +#define PCH_DEV_SPI _PCH_DEV(ESPI, 5) +#define PCH_DEV_GBE _PCH_DEV(ESPI, 6) +#define PCH_DEV_TRACEHUB _PCH_DEV(ESPI, 7) + +#endif diff --git a/src/soc/intel/elkhartlake/include/soc/pcr_ids.h b/src/soc/intel/elkhartlake/include/soc/pcr_ids.h new file mode 100644 index 0000000..411a141 --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/pcr_ids.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef SOC_JASPERLAKE_PCR_H +#define SOC_JASPERLAKE_PCR_H +/* + * Port ids + */ +#define PID_EMMC 0x52 +#define PID_SDX 0x53 + +#define PID_GPIOCOM0 0x6e +#define PID_GPIOCOM1 0x6d +#define PID_GPIOCOM2 0x6c +#define PID_GPIOCOM4 0x6a +#define PID_GPIOCOM5 0x69 + +#define PID_DMI 0x88 +#define PID_PSTH 0x89 +#define PID_CSME0 0x90 +#define PID_ISCLK 0xad +#define PID_PSF1 0xba +#define PID_PSF2 0xbb +#define PID_PSF3 0xbc +#define PID_PSF4 0xbd +#define PID_SCS 0xc0 +#define PID_RTC 0xc3 +#define PID_ITSS 0xc4 +#define PID_ESPI 0xc7 +#define PID_SERIALIO 0xcb + +#endif diff --git a/src/soc/intel/elkhartlake/include/soc/pm.h b/src/soc/intel/elkhartlake/include/soc/pm.h new file mode 100644 index 0000000..f1da3a8 --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/pm.h @@ -0,0 +1,165 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef _SOC_PM_H_ +#define _SOC_PM_H_ + +#define PM1_STS 0x00 +#define WAK_STS (1 << 15) +#define PCIEXPWAK_STS (1 << 14) +#define PRBTNOR_STS (1 << 11) +#define RTC_STS (1 << 10) +#define PWRBTN_STS (1 << 8) +#define GBL_STS (1 << 5) +#define BM_STS (1 << 4) +#define TMROF_STS (1 << 0) +#define PM1_EN 0x02 +#define PCIEXPWAK_DIS (1 << 14) +#define RTC_EN (1 << 10) +#define PWRBTN_EN (1 << 8) +#define GBL_EN (1 << 5) +#define TMROF_EN (1 << 0) +#define PM1_CNT 0x04 +#define GBL_RLS (1 << 2) +#define BM_RLD (1 << 1) +#define SCI_EN (1 << 0) +#define PM1_TMR 0x08 +#define SMI_EN 0x30 +#define XHCI_SMI_EN (1 << 31) +#define ME_SMI_EN (1 << 30) +#define ESPI_SMI_EN (1 << 28) +#define GPIO_UNLOCK_SMI_EN (1 << 27) +#define INTEL_USB2_EN (1 << 18) +#define LEGACY_USB2_EN (1 << 17) +#define PERIODIC_EN (1 << 14) +#define TCO_SMI_EN (1 << 13) +#define MCSMI_EN (1 << 11) +#define BIOS_RLS (1 << 7) +#define SWSMI_TMR_EN (1 << 6) +#define APMC_EN (1 << 5) +#define SLP_SMI_EN (1 << 4) +#define LEGACY_USB_EN (1 << 3) +#define BIOS_EN (1 << 2) +#define EOS (1 << 1) +#define GBL_SMI_EN (1 << 0) +#define SMI_STS 0x34 +#define SMI_STS_BITS 32 +#define XHCI_SMI_STS_BIT 31 +#define ME_SMI_STS_BIT 30 +#define ESPI_SMI_STS_BIT 28 +#define GPIO_UNLOCK_SMI_STS_BIT 27 +#define SPI_SMI_STS_BIT 26 +#define SCC_SMI_STS_BIT 25 +#define MONITOR_STS_BIT 21 +#define PCI_EXP_SMI_STS_BIT 20 +#define SMBUS_SMI_STS_BIT 16 +#define SERIRQ_SMI_STS_BIT 15 +#define PERIODIC_STS_BIT 14 +#define TCO_STS_BIT 13 +#define DEVMON_STS_BIT 12 +#define MCSMI_STS_BIT 11 +#define GPIO_STS_BIT 10 +#define GPE0_STS_BIT 9 +#define PM1_STS_BIT 8 +#define SWSMI_TMR_STS_BIT 6 +#define APM_STS_BIT 5 +#define SMI_ON_SLP_EN_STS_BIT 4 +#define LEGACY_USB_STS_BIT 3 +#define BIOS_STS_BIT 2 +#define GPE_CNTL 0x42 +#define SWGPE_CTRL (1 << 1) +#define DEVACT_STS 0x44 +#define PM2_CNT 0x50 + +#define GPE0_REG_MAX 4 +#define GPE0_REG_SIZE 32 +#define GPE0_STS(x) (0x60 + ((x) * 4)) +#define GPE_31_0 0 /* 0x60/0x70 = GPE[31:0] */ +#define GPE_63_32 1 /* 0x64/0x74 = GPE[63:32] */ +#define GPE_95_64 2 /* 0x68/0x78 = GPE[95:64] */ +#define GPE_STD 3 /* 0x6c/0x7c = Standard GPE */ +#define GPE_STS_RSVD GPE_STD +#define WADT_STS (1 << 18) +#define GPIO_T2_STS (1 << 15) +#define ESPI_STS (1 << 14) +#define PME_B0_STS (1 << 13) +#define ME_SCI_STS (1 << 12) +#define PME_STS (1 << 11) +#define BATLOW_STS (1 << 10) +#define PCI_EXP_STS (1 << 9) +#define SMB_WAK_STS (1 << 7) +#define TCOSCI_STS (1 << 6) +#define SWGPE_STS (1 << 2) +#define HOT_PLUG_STS (1 << 1) +#define GPE0_EN(x) (0x70 + ((x) * 4)) +#define WADT_EN (1 << 18) +#define GPIO_T2_EN (1 << 15) +#define ESPI_EN (1 << 14) +#define PME_B0_EN_BIT 13 +#define PME_B0_EN (1 << PME_B0_EN_BIT) +#define ME_SCI_EN (1 << 12) +#define PME_EN (1 << 11) +#define BATLOW_EN (1 << 10) +#define PCI_EXP_EN (1 << 9) +#define TCOSCI_EN (1 << 6) +#define SWGPE_EN (1 << 2) +#define HOT_PLUG_EN (1 << 1) + +#define EN_BLOCK 3 + +/* + * Enable SMI generation: + * - on APMC writes (io 0xb2) + * - on writes to SLP_EN (sleep states) + * - on writes to GBL_RLS (bios commands) + * - on eSPI events (does nothing on LPC systems) + * No SMIs: + * - on TCO events, unless enabled in common code + * - on microcontroller writes (io 0x62/0x66) + */ +#define ENABLE_SMI_PARAMS \ + (APMC_EN | SLP_SMI_EN | GBL_SMI_EN | ESPI_SMI_EN | EOS) + +#define PSS_RATIO_STEP 2 +#define PSS_MAX_ENTRIES 8 +#define PSS_LATENCY_TRANSITION 10 +#define PSS_LATENCY_BUSMASTER 10 + +#if !defined(__ACPI__) + +#include <arch/acpi.h> +#include <soc/gpe.h> +#include <soc/iomap.h> +#include <soc/smbus.h> +#include <soc/pmc.h> + +struct chipset_power_state { + uint16_t pm1_sts; + uint16_t pm1_en; + uint32_t pm1_cnt; + uint16_t tco1_sts; + uint16_t tco2_sts; + uint32_t gpe0_sts[4]; + uint32_t gpe0_en[4]; + uint32_t gen_pmcon_a; + uint32_t gen_pmcon_b; + uint32_t gblrst_cause[2]; + uint32_t prev_sleep_state; +} __packed; + +/* Get base address PMC memory mapped registers. */ +uint8_t *pmc_mmio_regs(void); + +/* Get base address of TCO I/O registers. */ +uint16_t smbus_tco_regs(void); + +/* Set the DISB after DRAM init */ +void pmc_set_disb(void); + +/* Clear PMCON status bits */ +void pmc_clear_pmcon_sts(void); + +/* STM Support */ +uint16_t get_pmbase(void); +#endif /* !defined(__ACPI__) */ +#endif diff --git a/src/soc/intel/elkhartlake/include/soc/pmc.h b/src/soc/intel/elkhartlake/include/soc/pmc.h new file mode 100644 index 0000000..06dcad2 --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/pmc.h @@ -0,0 +1,138 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef _SOC_JASPERLAKE_PMC_H_ +#define _SOC_JASPERLAKE_PMC_H_ + +/* PCI Configuration Space (D31:F2): PMC */ +#define PWRMBASE 0x10 +#define ABASE 0x20 + +/* Memory mapped IO registers in PMC */ +#define GEN_PMCON_A 0x1020 +#define DC_PP_DIS (1 << 30) +#define DSX_PP_DIS (1 << 29) +#define AG3_PP_EN (1 << 28) +#define SX_PP_EN (1 << 27) +#define ALLOW_ICLK_PLL_SD_INC0 (1 << 26) +#define GBL_RST_STS (1 << 24) +#define DISB (1 << 23) +#define ALLOW_OPI_PLL_SD_INC0 (1 << 22) +#define MEM_SR (1 << 21) +#define ALLOW_SPXB_CG_INC0 (1 << 20) +#define ALLOW_L1LOW_C0 (1 << 19) +#define MS4V (1 << 18) +#define ALLOW_L1LOW_OPI_ON (1 << 17) +#define SUS_PWR_FLR (1 << 16) +#define PME_B0_S5_DIS (1 << 15) +#define PWR_FLR (1 << 14) +#define ALLOW_L1LOW_BCLKREQ_ON (1 << 13) +#define DIS_SLP_X_STRCH_SUS_UP (1 << 12) +#define SLP_S3_MIN_ASST_WDTH_MASK (3 << 10) +#define SLP_S3_MIN_ASST_WDTH_60USEC (0 << 10) +#define SLP_S3_MIN_ASST_WDTH_1MS (1 << 10) +#define SLP_S3_MIN_ASST_WDTH_50MS (2 << 10) +#define SLP_S3_MIN_ASST_WDTH_2S (3 << 10) +#define HOST_RST_STS (1 << 9) +#define ESPI_SMI_LOCK (1 << 8) +#define S4MAW_MASK (3 << 4) +#define S4MAW_1S (1 << 4) +#define S4MAW_2S (2 << 4) +#define S4MAW_3S (3 << 4) +#define S4MAW_4S (0 << 4) +#define S4ASE (1 << 3) +#define PER_SMI_SEL_MASK (3 << 1) +#define SMI_RATE_64S (0 << 1) +#define SMI_RATE_32S (1 << 1) +#define SMI_RATE_16S (2 << 1) +#define SMI_RATE_8S (3 << 1) +#define SLEEP_AFTER_POWER_FAIL (1 << 0) + +#define GEN_PMCON_B 0x1024 +#define SLP_STR_POL_LOCK (1 << 18) +#define ACPI_BASE_LOCK (1 << 17) +#define PM_DATA_BAR_DIS (1 << 16) +#define WOL_EN_OVRD (1 << 13) +#define BIOS_PCI_EXP_EN (1 << 10) +#define PWRBTN_LVL (1 << 9) +#define SMI_LOCK (1 << 4) +#define RTC_BATTERY_DEAD (1 << 2) + +#define ETR 0x1048 +#define CF9_LOCK (1 << 31) +#define CF9_GLB_RST (1 << 20) + +#define SSML 0x104C +#define SSML_SSL_DS (0 << 0) +#define SSML_SSL_EN (1 << 0) + +#define SSMC 0x1050 +#define SSMC_SSMS (1 << 0) + +#define SSMD 0x1054 +#define SSMD_SSD_MASK (0xffff << 0) + +#define PRSTS 0x1810 + +#define S3_PWRGATE_POL 0x1828 +#define S3DC_GATE_SUS (1 << 1) +#define S3AC_GATE_SUS (1 << 0) + +#define S4_PWRGATE_POL 0x182c +#define S4DC_GATE_SUS (1 << 1) +#define S4AC_GATE_SUS (1 << 0) + +#define S5_PWRGATE_POL 0x1830 +#define S5DC_GATE_SUS (1 << 15) +#define S5AC_GATE_SUS (1 << 14) + +#define DSX_CFG 0x1834 +#define REQ_CNV_NOWAKE_DSX (1 << 4) +#define REQ_BATLOW_DSX (1 << 3) +#define DSX_EN_WAKE_PIN (1 << 2) +#define DSX_DIS_AC_PRESENT_PD (1 << 1) +#define DSX_EN_LAN_WAKE_PIN (1 << 0) +#define DSX_CFG_MASK (0x1f << 0) + +#define PMSYNC_TPR_CFG 0x18C4 +#define PCH2CPU_TPR_CFG_LOCK (1 << 31) +#define PCH2CPU_TT_EN (1 << 26) + +#define PCH_PWRM_ACPI_TMR_CTL 0x18FC +#define GPIO_GPE_CFG 0x1920 +#define GPE0_DWX_MASK 0xf +#define GPE0_DW_SHIFT(x) (4*(x)) + +#define PMC_GPP_A 0x0 +#define PMC_GPP_B 0x1 +#define PMC_GPP_F 0x2 +#define PMC_GPD 0x3 +#define PMC_GPP_R 0x4 +#define PMC_GPP_S 0x6 +#define PMC_GPP_D 0x7 +#define PMC_GPP_C 0x8 +#define PMC_GPP_H 0xA +#define PMC_GPP_E 0xF + +#define GBLRST_CAUSE0 0x1924 +#define GBLRST_CAUSE0_THERMTRIP (1 << 5) +#define GBLRST_CAUSE1 0x1928 + +#define CPPMVRIC 0x1B1C +#define XTALSDQDIS (1 << 22) + +#define IRQ_REG ACTL +#define SCI_IRQ_ADJUST 0 +#define ACTL 0x1BD8 +#define PWRM_EN (1 << 8) +#define ACPI_EN (1 << 7) +#define SCI_IRQ_SEL (7 << 0) + +#define SCIS_IRQ9 0 +#define SCIS_IRQ10 1 +#define SCIS_IRQ11 2 +#define SCIS_IRQ20 4 +#define SCIS_IRQ21 5 +#define SCIS_IRQ22 6 +#define SCIS_IRQ23 7 +#endif diff --git a/src/soc/intel/elkhartlake/include/soc/ramstage.h b/src/soc/intel/elkhartlake/include/soc/ramstage.h new file mode 100644 index 0000000..1f79b33 --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/ramstage.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef _SOC_RAMSTAGE_H_ +#define _SOC_RAMSTAGE_H_ + +#include <device/device.h> +#include <fsp/api.h> +#include <fsp/util.h> +#include <soc/soc_chip.h> + +void mainboard_silicon_init_params(FSP_S_CONFIG *params); +void soc_init_pre_device(void *chip_info); + +#endif diff --git a/src/soc/intel/elkhartlake/include/soc/romstage.h b/src/soc/intel/elkhartlake/include/soc/romstage.h new file mode 100644 index 0000000..e3c7969 --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/romstage.h @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef _SOC_ROMSTAGE_H_ +#define _SOC_ROMSTAGE_H_ + +#include <fsp/api.h> + +/* Provide a callback to allow mainboard to override the DRAM part number. */ +bool mainboard_get_dram_part_num(const char **part_num, size_t *len); +void mainboard_memory_init_params(FSPM_UPD *mupd); +void systemagent_early_init(void); +void pch_init(void); + +/* Board type */ +enum board_type { + BOARD_TYPE_MOBILE = 0, + BOARD_TYPE_DESKTOP = 1, + BOARD_TYPE_ULT_ULX = 5, + BOARD_TYPE_SERVER = 7 +}; + +#endif /* _SOC_ROMSTAGE_H_ */ diff --git a/src/soc/intel/elkhartlake/include/soc/serialio.h b/src/soc/intel/elkhartlake/include/soc/serialio.h new file mode 100644 index 0000000..cd6c8cb --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/serialio.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef _SERIALIO_H_ +#define _SERIALIO_H_ + +enum { + PchSerialIoDisabled, + PchSerialIoPci, + PchSerialIoHidden, + PchSerialIoLegacyUart, + PchSerialIoSkipInit +}; + +enum { + PchSerialIoIndexI2C0, + PchSerialIoIndexI2C1, + PchSerialIoIndexI2C2, + PchSerialIoIndexI2C3, + PchSerialIoIndexI2C4, + PchSerialIoIndexI2C5, +}; + +enum { + PchSerialIoIndexGSPI0, + PchSerialIoIndexGSPI1, + PchSerialIoIndexGSPI2, + PchSerialIoIndexGSPI3, +}; + +enum { + PchSerialIoIndexUART0, + PchSerialIoIndexUART1, + PchSerialIoIndexUART2, +}; + +#endif diff --git a/src/soc/intel/elkhartlake/include/soc/smbus.h b/src/soc/intel/elkhartlake/include/soc/smbus.h new file mode 100644 index 0000000..7333891 --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/smbus.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef _SOC_JASPERLAKE_SMBUS_H_ +#define _SOC_JASPERLAKE_SMBUS_H_ + +/* IO and MMIO registers under primary BAR */ + +/* TCO registers and fields live behind TCOBASE I/O bar in SMBus device. */ +#define TCO1_STS 0x04 +#define TCO_TIMEOUT (1 << 3) +#define TCO2_STS 0x06 +#define TCO_STS_SECOND_TO (1 << 1) +#define TCO_INTRD_DET (1 << 0) +#define TCO1_CNT 0x08 +#define TCO_LOCK (1 << 12) +#define TCO_TMR_HLT (1 << 11) +#define TCO2_CNT 0x0A +#define TCO_INTRD_SEL_MASK (3 << 1) +#define TCO_INTRD_SEL_SMI (1 << 2) +#define TCO_INTRD_SEL_INT (1 << 1) + +/* + * Default slave address value for PCH. This value is set to match default + * value set by hardware. It is useful since PCH is able to respond even + * before CPU is up. This is reset by RSMRST# but not by PLTRST#. + */ +#define SMBUS_SLAVE_ADDR 0x44 + +#endif diff --git a/src/soc/intel/elkhartlake/include/soc/soc_chip.h b/src/soc/intel/elkhartlake/include/soc/soc_chip.h new file mode 100644 index 0000000..d1b8801 --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/soc_chip.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef _SOC_JASPERLAKE_SOC_CHIP_H_ +#define _SOC_JASPERLAKE_SOC_CHIP_H_ + +#include "../../chip.h" + +#endif /* _SOC_JASPERLAKE_SOC_CHIP_H_ */ diff --git a/src/soc/intel/elkhartlake/include/soc/systemagent.h b/src/soc/intel/elkhartlake/include/soc/systemagent.h new file mode 100644 index 0000000..0439979 --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/systemagent.h @@ -0,0 +1,62 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#ifndef SOC_JASPERLAKE_SYSTEMAGENT_H +#define SOC_JASPERLAKE_SYSTEMAGENT_H + +#include <intelblocks/systemagent.h> + +/* Device 0:0.0 PCI configuration space */ + +#define EPBAR 0x40 +#define DMIBAR 0x68 +#define SMRAM 0x88 /* System Management RAM Control */ +#define D_OPEN (1 << 6) +#define D_CLS (1 << 5) +#define D_LCK (1 << 4) +#define G_SMRAME (1 << 3) +#define C_BASE_SEG ((0 << 2) | (1 << 1) | (0 << 0)) +#define CAPID0_A 0xe4 +#define VTD_DISABLE (1 << 23) + +#define BIOS_RESET_CPL 0x5da8 +#define GFXVTBAR 0x5400 +#define EDRAMBAR 0x5408 +#define VTVC0BAR 0x5410 +#define REGBAR 0x5420 +#define IPUVTBAR 0x7880 +#define TBT0BAR 0x7888 +#define TBT1BAR 0x7890 +#define TBT2BAR 0x7898 +#define TBT3BAR 0x78A0 +#define MAX_TBT_PCIE_PORT 4 + +#define VTBAR_ENABLED 0x01 +#define VTBAR_MASK 0x7ffffff000ull + +#define MCH_PKG_POWER_LIMIT_LO 0x59a0 +#define MCH_PKG_POWER_LIMIT_HI 0x59a4 +#define MCH_DDR_POWER_LIMIT_LO 0x58e0 +#define MCH_DDR_POWER_LIMIT_HI 0x58e4 + +#define IMRBASE 0x6A40 +#define IMRLIMIT 0x6A48 + +static const struct sa_mmio_descriptor soc_vtd_resources[] = { + { GFXVTBAR, GFXVT_BASE_ADDRESS, GFXVT_BASE_SIZE, "GFXVTBAR" }, + { IPUVTBAR, IPUVT_BASE_ADDRESS, IPUVT_BASE_SIZE, "IPUVTBAR" }, + { TBT0BAR, TBT0_BASE_ADDRESS, TBT0_BASE_SIZE, "TBT0BAR" }, + { TBT1BAR, TBT1_BASE_ADDRESS, TBT1_BASE_SIZE, "TBT1BAR" }, + { TBT2BAR, TBT2_BASE_ADDRESS, TBT2_BASE_SIZE, "TBT2BAR" }, + { TBT3BAR, TBT3_BASE_ADDRESS, TBT3_BASE_SIZE, "TBT3BAR" }, + { VTVC0BAR, VTVC0_BASE_ADDRESS, VTVC0_BASE_SIZE, "VTVC0BAR" }, +}; + +#define V_P2SB_CFG_IBDF_BUS 0 +#define V_P2SB_CFG_IBDF_DEV 30 +#define V_P2SB_CFG_IBDF_FUNC 7 +#define V_P2SB_CFG_HBDF_BUS 0 +#define V_P2SB_CFG_HBDF_DEV 30 +#define V_P2SB_CFG_HBDF_FUNC 6 + +#endif diff --git a/src/soc/intel/elkhartlake/include/soc/usb.h b/src/soc/intel/elkhartlake/include/soc/usb.h new file mode 100644 index 0000000..4caa402 --- /dev/null +++ b/src/soc/intel/elkhartlake/include/soc/usb.h @@ -0,0 +1,140 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + + +#ifndef _SOC_USB_H_ +#define _SOC_USB_H_ + +#include <stdint.h> + +/* Per Port HS Transmitter Emphasis */ +#define USB2_EMP_OFF 0 +#define USB2_DE_EMP_ON 1 +#define USB2_PRE_EMP_ON 2 +#define USB2_DE_EMP_ON_PRE_EMP_ON 3 + +/* Per Port Half Bit Pre-emphasis */ +#define USB2_FULL_BIT_PRE_EMP 0 +#define USB2_HALF_BIT_PRE_EMP 1 + +/* Per Port HS Preemphasis Bias */ +#define USB2_BIAS_0MV 0 +#define USB2_BIAS_11P25MV 1 +#define USB2_BIAS_16P9MV 2 +#define USB2_BIAS_28P15MV 3 +#define USB2_BIAS_39P35MV 5 +#define USB2_BIAS_45MV 6 +#define USB2_BIAS_56P3MV 7 + +struct usb2_port_config { + uint8_t enable; + uint8_t ocpin; + uint8_t tx_bias; + uint8_t tx_emp_enable; + uint8_t pre_emp_bias; + uint8_t pre_emp_bit; +}; + +/* USB Overcurrent pins definition */ +enum { + OC0 = 0, + OC1, + OC2, + OC3, + OC4, + OC5, + OC6, + OC7, + OCMAX, + OC_SKIP = 0xff, /* Skip OC programming */ +}; + +/* Standard USB Port based on length: + * - External + * - Back Panel + * - OTG + * - M.2 + * - Internal device down */ + +#define USB2_PORT_EMPTY { \ + .enable = 0, \ + .ocpin = OC_SKIP, \ + .tx_bias = USB2_BIAS_0MV, \ + .tx_emp_enable = USB2_EMP_OFF, \ + .pre_emp_bias = USB2_BIAS_0MV, \ + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, \ +} + +/* Length = 11.5"-12" */ +#define USB2_PORT_LONG(pin) { \ + .enable = 1, \ + .ocpin = (pin), \ + .tx_bias = USB2_BIAS_39P35MV, \ + .tx_emp_enable = USB2_PRE_EMP_ON, \ + .pre_emp_bias = USB2_BIAS_56P3MV, \ + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, \ +} + +/* Length = 6"-11.49" */ +#define USB2_PORT_MID(pin) { \ + .enable = 1, \ + .ocpin = (pin), \ + .tx_bias = USB2_BIAS_0MV, \ + .tx_emp_enable = USB2_PRE_EMP_ON, \ + .pre_emp_bias = USB2_BIAS_56P3MV, \ + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, \ +} + +/* Length = 3"-5.99" */ +#define USB2_PORT_SHORT(pin) { \ + .enable = 1, \ + .ocpin = (pin), \ + .tx_bias = USB2_BIAS_39P35MV, \ + .tx_emp_enable = USB2_PRE_EMP_ON | USB2_DE_EMP_ON, \ + .pre_emp_bias = USB2_BIAS_39P35MV, \ + .pre_emp_bit = USB2_FULL_BIT_PRE_EMP, \ +} + +/* Max TX and Pre-emp settings */ +#define USB2_PORT_MAX(pin) { \ + .enable = 1, \ + .ocpin = (pin), \ + .tx_bias = USB2_BIAS_56P3MV, \ + .tx_emp_enable = USB2_PRE_EMP_ON, \ + .pre_emp_bias = USB2_BIAS_56P3MV, \ + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, \ +} + +/* Type-C Port, no BC1.2 charge detect module / MUX + * Length = 3.0" - 9.00" */ +#define USB2_PORT_TYPE_C(pin) { \ + .enable = 1, \ + .ocpin = (pin), \ + .tx_bias = USB2_BIAS_0MV, \ + .tx_emp_enable = USB2_PRE_EMP_ON, \ + .pre_emp_bias = USB2_BIAS_56P3MV, \ + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, \ +} + +struct usb3_port_config { + uint8_t enable; + uint8_t ocpin; + uint8_t tx_de_emp; + uint8_t tx_downscale_amp; +}; + +#define USB3_PORT_EMPTY { \ + .enable = 0, \ + .ocpin = OC_SKIP, \ + .tx_de_emp = 0x00, \ + .tx_downscale_amp = 0x00, \ +} + +#define USB3_PORT_DEFAULT(pin) { \ + .enable = 1, \ + .ocpin = (pin), \ + .tx_de_emp = 0x0, \ + .tx_downscale_amp = 0x00, \ +} + +#endif diff --git a/src/soc/intel/elkhartlake/lockdown.c b/src/soc/intel/elkhartlake/lockdown.c new file mode 100644 index 0000000..731d6c7 --- /dev/null +++ b/src/soc/intel/elkhartlake/lockdown.c @@ -0,0 +1,60 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <device/mmio.h> +#include <intelblocks/cfg.h> +#include <intelpch/lockdown.h> +#include <soc/pm.h> + +static void pmc_lock_pmsync(void) +{ + uint8_t *pmcbase; + uint32_t pmsyncreg; + + pmcbase = pmc_mmio_regs(); + + pmsyncreg = read32(pmcbase + PMSYNC_TPR_CFG); + pmsyncreg |= PCH2CPU_TPR_CFG_LOCK; + write32(pmcbase + PMSYNC_TPR_CFG, pmsyncreg); +} + +static void pmc_lock_abase(void) +{ + uint8_t *pmcbase; + uint32_t reg32; + + pmcbase = pmc_mmio_regs(); + + reg32 = read32(pmcbase + GEN_PMCON_B); + reg32 |= (SLP_STR_POL_LOCK | ACPI_BASE_LOCK); + write32(pmcbase + GEN_PMCON_B, reg32); +} + +static void pmc_lock_smi(void) +{ + uint8_t *pmcbase; + uint8_t reg8; + + pmcbase = pmc_mmio_regs(); + + reg8 = read8(pmcbase + GEN_PMCON_B); + reg8 |= SMI_LOCK; + write8(pmcbase + GEN_PMCON_B, reg8); +} + +static void pmc_lockdown_cfg(int chipset_lockdown) +{ + /* PMSYNC */ + pmc_lock_pmsync(); + /* Lock down ABASE and sleep stretching policy */ + pmc_lock_abase(); + + if (chipset_lockdown == CHIPSET_LOCKDOWN_COREBOOT) + pmc_lock_smi(); +} + +void soc_lockdown_config(int chipset_lockdown) +{ + /* PMC lock down configuration */ + pmc_lockdown_cfg(chipset_lockdown); +} diff --git a/src/soc/intel/elkhartlake/meminit.c b/src/soc/intel/elkhartlake/meminit.c new file mode 100644 index 0000000..cca3082 --- /dev/null +++ b/src/soc/intel/elkhartlake/meminit.c @@ -0,0 +1,115 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <assert.h> +#include <console/console.h> +#include <fsp/util.h> +#include <soc/meminit.h> +#include <spd_bin.h> +#include <string.h> + +static void spd_read_from_cbfs(const struct spd_info *spd_info, uintptr_t *spd_data_ptr, + size_t *spd_data_len) +{ + struct region_device spd_rdev; + size_t spd_index = spd_info->spd_spec.spd_index; + + printk(BIOS_DEBUG, "SPD INDEX = %lu\n", spd_index); + if (get_spd_cbfs_rdev(&spd_rdev, spd_index) < 0) + die("spd.bin not found or incorrect index\n"); + + *spd_data_len = region_device_sz(&spd_rdev); + + /* Memory leak is ok since we have memory mapped boot media */ + assert(CONFIG(BOOT_DEVICE_MEMORY_MAPPED)); + + *spd_data_ptr = (uintptr_t)rdev_mmap_full(&spd_rdev); +} + +static void get_spd_data(const struct spd_info *spd_info, uintptr_t *spd_data_ptr, + size_t *spd_data_len) +{ + if (spd_info->read_type == READ_SPD_MEMPTR) { + *spd_data_ptr = spd_info->spd_spec.spd_data_ptr_info.spd_data_ptr; + *spd_data_len = spd_info->spd_spec.spd_data_ptr_info.spd_data_len; + return; + } + + if (spd_info->read_type == READ_SPD_CBFS) { + spd_read_from_cbfs(spd_info, spd_data_ptr, spd_data_len); + return; + } + + die("no valid way to read SPD info"); +} + +static void meminit_dq_dqs_map(FSP_M_CONFIG *mem_cfg, const struct mb_cfg *board_cfg, + bool half_populated) +{ + memcpy(&mem_cfg->RcompResistor, &board_cfg->rcomp_resistor, + sizeof(mem_cfg->RcompResistor)); + + memcpy(&mem_cfg->RcompTarget, &board_cfg->rcomp_targets, + sizeof(mem_cfg->RcompTarget)); + + memcpy(&mem_cfg->DqByteMapCh0, &board_cfg->dq_map[DDR_CH0], + sizeof(board_cfg->dq_map[DDR_CH0])); + + memcpy(&mem_cfg->DqsMapCpu2DramCh0, &board_cfg->dqs_map[DDR_CH0], + sizeof(board_cfg->dqs_map[DDR_CH0])); + + if (half_populated) + return; + + memcpy(&mem_cfg->DqByteMapCh1, &board_cfg->dq_map[DDR_CH1], + sizeof(board_cfg->dq_map[DDR_CH1])); + + memcpy(&mem_cfg->DqsMapCpu2DramCh1, &board_cfg->dqs_map[DDR_CH1], + sizeof(board_cfg->dqs_map[DDR_CH1])); +} + +static void meminit_channels(FSP_M_CONFIG *mem_cfg, const struct mb_cfg *board_cfg, + uintptr_t spd_data_ptr, bool half_populated) +{ + /* Channel 0 */ + mem_cfg->MemorySpdPtr00 = spd_data_ptr; + mem_cfg->MemorySpdPtr01 = 0; + + if (half_populated) { + printk(BIOS_INFO, "%s: DRAM half-populated\n", __func__); + spd_data_ptr = 0; + } + + /* Channel 1 */ + mem_cfg->MemorySpdPtr10 = spd_data_ptr; + mem_cfg->MemorySpdPtr11 = 0; + + meminit_dq_dqs_map(mem_cfg, board_cfg, half_populated); +} + +/* Initialize onboard memory configurations for lpddr4x */ +void memcfg_init(FSP_M_CONFIG *mem_cfg, const struct mb_cfg *board_cfg, + const struct spd_info *spd_info, bool half_populated) +{ + + if (spd_info->read_type == READ_SMBUS) { + for (int i = 0; i < NUM_DIMM_SLOT; i++) + mem_cfg->SpdAddressTable[i] = spd_info->spd_spec.spd_smbus_address[i]; + + meminit_dq_dqs_map(mem_cfg, board_cfg, half_populated); + } else { + uintptr_t spd_data_ptr = 0; + size_t spd_data_len = 0; + memset(&mem_cfg->SpdAddressTable, 0, sizeof(mem_cfg->SpdAddressTable)); + get_spd_data(spd_info, &spd_data_ptr, &spd_data_len); + print_spd_info((unsigned char *)spd_data_ptr); + + mem_cfg->MemorySpdDataLen = spd_data_len; + meminit_channels(mem_cfg, board_cfg, spd_data_ptr, half_populated); + } + + /* Early Command Training Enabled */ + mem_cfg->ECT = board_cfg->ect; + + mem_cfg->UserBd = board_cfg->UserBd; +} diff --git a/src/soc/intel/elkhartlake/p2sb.c b/src/soc/intel/elkhartlake/p2sb.c new file mode 100644 index 0000000..38248a4 --- /dev/null +++ b/src/soc/intel/elkhartlake/p2sb.c @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <console/console.h> +#include <intelblocks/p2sb.h> + +void p2sb_soc_get_sb_mask(uint32_t *ep_mask, size_t count) +{ + uint32_t mask; + + if (count != P2SB_EP_MASK_MAX_REG) { + printk(BIOS_ERR, "Unable to program EPMASK registers\n"); + return; + } + + /* Remove the host accessing right to PSF register range. + * Set p2sb PCI offset EPMASK5 [29, 28, 27, 26] to disable Sideband + * access for PCI Root Bridge. + */ + mask = (1 << 29) | (1 << 28) | (1 << 27) | (1 << 26); + + ep_mask[P2SB_EP_MASK_5_REG] = mask; + + /* + * Set p2sb PCI offset EPMASK7 [31, 30] to disable Sideband + * access for Broadcast and Multicast. + */ + mask = (1 << 31) | (1 << 30); + + ep_mask[P2SB_EP_MASK_7_REG] = mask; +} diff --git a/src/soc/intel/elkhartlake/pmc.c b/src/soc/intel/elkhartlake/pmc.c new file mode 100644 index 0000000..fdaec0d --- /dev/null +++ b/src/soc/intel/elkhartlake/pmc.c @@ -0,0 +1,96 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <bootstate.h> +#include <console/console.h> +#include <device/mmio.h> +#include <device/device.h> +#include <intelblocks/pmc.h> +#include <intelblocks/pmclib.h> +#include <intelblocks/rtc.h> +#include <soc/pci_devs.h> +#include <soc/pm.h> +#include <soc/soc_chip.h> + +/* + * Set which power state system will be after reapplying + * the power (from G3 State) + */ +void pmc_soc_set_afterg3_en(const bool on) +{ + uint8_t reg8; + uint8_t *const pmcbase = pmc_mmio_regs(); + + reg8 = read8(pmcbase + GEN_PMCON_A); + if (on) + reg8 &= ~SLEEP_AFTER_POWER_FAIL; + else + reg8 |= SLEEP_AFTER_POWER_FAIL; + write8(pmcbase + GEN_PMCON_A, reg8); +} + +static void config_deep_sX(uint32_t offset, uint32_t mask, int sx, int enable) +{ + uint32_t reg; + uint8_t *pmcbase = pmc_mmio_regs(); + + printk(BIOS_DEBUG, "%sabling Deep S%c\n", + enable ? "En" : "Dis", sx + '0'); + reg = read32(pmcbase + offset); + if (enable) + reg |= mask; + else + reg &= ~mask; + write32(pmcbase + offset, reg); +} + +static void config_deep_s5(int on_ac, int on_dc) +{ + /* Treat S4 the same as S5. */ + config_deep_sX(S4_PWRGATE_POL, S4AC_GATE_SUS, 4, on_ac); + config_deep_sX(S4_PWRGATE_POL, S4DC_GATE_SUS, 4, on_dc); + config_deep_sX(S5_PWRGATE_POL, S5AC_GATE_SUS, 5, on_ac); + config_deep_sX(S5_PWRGATE_POL, S5DC_GATE_SUS, 5, on_dc); +} + +static void config_deep_s3(int on_ac, int on_dc) +{ + config_deep_sX(S3_PWRGATE_POL, S3AC_GATE_SUS, 3, on_ac); + config_deep_sX(S3_PWRGATE_POL, S3DC_GATE_SUS, 3, on_dc); +} + +static void config_deep_sx(uint32_t deepsx_config) +{ + uint32_t reg; + uint8_t *pmcbase = pmc_mmio_regs(); + + reg = read32(pmcbase + DSX_CFG); + reg &= ~DSX_CFG_MASK; + reg |= deepsx_config; + write32(pmcbase + DSX_CFG, reg); +} + +static void pmc_init(void *unused) +{ + const config_t *config = config_of_soc(); + + rtc_init(); + + pmc_set_power_failure_state(true); + pmc_gpe_init(); + + pmc_set_acpi_mode(); + + config_deep_s3(config->deep_s3_enable_ac, config->deep_s3_enable_dc); + config_deep_s5(config->deep_s5_enable_ac, config->deep_s5_enable_dc); + config_deep_sx(config->deep_sx_config); +} + +/* +* Initialize PMC controller. +* +* PMC controller gets hidden from PCI bus during FSP-Silicon init call. +* Hence PCI enumeration can't be used to initialize bus device and +* allocate resources. +*/ +BOOT_STATE_INIT_ENTRY(BS_DEV_INIT_CHIPS, BS_ON_EXIT, pmc_init, NULL); diff --git a/src/soc/intel/elkhartlake/pmutil.c b/src/soc/intel/elkhartlake/pmutil.c new file mode 100644 index 0000000..afcbb71 --- /dev/null +++ b/src/soc/intel/elkhartlake/pmutil.c @@ -0,0 +1,268 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +/* + * Helper functions for dealing with power management registers + * and the differences between PCH variants. + */ + +#define __SIMPLE_DEVICE__ + +#include <device/mmio.h> +#include <cbmem.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_def.h> +#include <console/console.h> +#include <intelblocks/pmclib.h> +#include <intelblocks/rtc.h> +#include <intelblocks/tco.h> +#include <soc/espi.h> +#include <soc/gpe.h> +#include <soc/gpio.h> +#include <soc/iomap.h> +#include <soc/pci_devs.h> +#include <soc/pm.h> +#include <soc/smbus.h> +#include <soc/soc_chip.h> +#include <security/vboot/vbnv.h> + +/* + * SMI + */ + +const char *const *soc_smi_sts_array(size_t *a) +{ + static const char *const smi_sts_bits[] = { + [BIOS_STS_BIT] = "BIOS", + [LEGACY_USB_STS_BIT] = "LEGACY_USB", + [SMI_ON_SLP_EN_STS_BIT] = "SLP_SMI", + [APM_STS_BIT] = "APM", + [SWSMI_TMR_STS_BIT] = "SWSMI_TMR", + [PM1_STS_BIT] = "PM1", + [GPE0_STS_BIT] = "GPE0", + [GPIO_STS_BIT] = "GPI", + [MCSMI_STS_BIT] = "MCSMI", + [DEVMON_STS_BIT] = "DEVMON", + [TCO_STS_BIT] = "TCO", + [PERIODIC_STS_BIT] = "PERIODIC", + [SERIRQ_SMI_STS_BIT] = "SERIRQ_SMI", + [SMBUS_SMI_STS_BIT] = "SMBUS_SMI", + [PCI_EXP_SMI_STS_BIT] = "PCI_EXP_SMI", + [MONITOR_STS_BIT] = "MONITOR", + [SPI_SMI_STS_BIT] = "SPI", + [GPIO_UNLOCK_SMI_STS_BIT] = "GPIO_UNLOCK", + [ESPI_SMI_STS_BIT] = "ESPI_SMI", + }; + + *a = ARRAY_SIZE(smi_sts_bits); + return smi_sts_bits; +} + +/* + * TCO + */ + +const char *const *soc_tco_sts_array(size_t *a) +{ + static const char *const tco_sts_bits[] = { + [0] = "NMI2SMI", + [1] = "SW_TCO", + [2] = "TCO_INT", + [3] = "TIMEOUT", + [7] = "NEWCENTURY", + [8] = "BIOSWR", + [9] = "DMISCI", + [10] = "DMISMI", + [12] = "DMISERR", + [13] = "SLVSEL", + [16] = "INTRD_DET", + [17] = "SECOND_TO", + [18] = "BOOT", + [20] = "SMLINK_SLV" + }; + + *a = ARRAY_SIZE(tco_sts_bits); + return tco_sts_bits; +} + +/* + * GPE0 + */ + +const char *const *soc_std_gpe_sts_array(size_t *a) +{ + static const char *const gpe_sts_bits[] = { + [1] = "HOTPLUG", + [2] = "SWGPE", + [6] = "TCO_SCI", + [7] = "SMB_WAK", + [9] = "PCI_EXP", + [10] = "BATLOW", + [11] = "PME", + [12] = "ME", + [13] = "PME_B0", + [14] = "eSPI", + [15] = "GPIO Tier-2", + [16] = "LAN_WAKE", + [18] = "WADT" + }; + + *a = ARRAY_SIZE(gpe_sts_bits); + return gpe_sts_bits; +} + +void pmc_set_disb(void) +{ + /* Set the DISB after DRAM init */ + uint8_t disb_val; + /* Only care about bits [23:16] of register GEN_PMCON_A */ + uint8_t *addr = (uint8_t *)(pmc_mmio_regs() + GEN_PMCON_A + 2); + + disb_val = read8(addr); + disb_val |= (DISB >> 16); + + /* Don't clear bits that are write-1-to-clear */ + disb_val &= ~((MS4V | SUS_PWR_FLR) >> 16); + write8(addr, disb_val); +} + +void pmc_clear_pmcon_sts(void) +{ + uint32_t reg_val; + uint8_t *addr; + addr = pmc_mmio_regs(); + + reg_val = read32(addr + GEN_PMCON_A); + /* Clear SUS_PWR_FLR, GBL_RST_STS, HOST_RST_STS, PWR_FLR bits + * while retaining MS4V write-1-to-clear bit */ + reg_val &= ~(MS4V); + + write32((addr + GEN_PMCON_A), reg_val); +} + +/* + * PMC controller gets hidden from PCI bus + * during FSP-Silicon init call. Hence PWRMBASE + * can't be accessible using PCI configuration space + * read/write. + */ +uint8_t *pmc_mmio_regs(void) +{ + return (void *)(uintptr_t)PCH_PWRM_BASE_ADDRESS; +} + +uintptr_t soc_read_pmc_base(void) +{ + return (uintptr_t)pmc_mmio_regs(); +} + + +uint32_t *soc_pmc_etr_addr(void) +{ + return (uint32_t *)(soc_read_pmc_base() + ETR); +} + +void soc_get_gpi_gpe_configs(uint8_t *dw0, uint8_t *dw1, uint8_t *dw2) +{ + DEVTREE_CONST struct soc_intel_jasperlake_config *config; + + config = config_of_soc(); + + /* Assign to out variable */ + *dw0 = config->pmc_gpe0_dw0; + *dw1 = config->pmc_gpe0_dw1; + *dw2 = config->pmc_gpe0_dw2; +} + +static int rtc_failed(uint32_t gen_pmcon_b) +{ + return !!(gen_pmcon_b & RTC_BATTERY_DEAD); +} + +int soc_get_rtc_failed(void) +{ + const struct chipset_power_state *ps = cbmem_find(CBMEM_ID_POWER_STATE); + + if (!ps) { + printk(BIOS_ERR, "Could not find power state in cbmem, RTC init aborted\n"); + return 1; + } + + return rtc_failed(ps->gen_pmcon_b); +} + +int vbnv_cmos_failed(void) +{ + return rtc_failed(read32(pmc_mmio_regs() + GEN_PMCON_B)); +} + +static inline int deep_s3_enabled(void) +{ + uint32_t deep_s3_pol; + + deep_s3_pol = read32(pmc_mmio_regs() + S3_PWRGATE_POL); + return !!(deep_s3_pol & (S3DC_GATE_SUS | S3AC_GATE_SUS)); +} + +/* Return 0, 3, or 5 to indicate the previous sleep state. */ +int soc_prev_sleep_state(const struct chipset_power_state *ps, + int prev_sleep_state) +{ + + /* + * Check for any power failure to determine if this a wake from + * S5 because the PCH does not set the WAK_STS bit when waking + * from a true G3 state. + */ + if (ps->gen_pmcon_a & (PWR_FLR | SUS_PWR_FLR)) + prev_sleep_state = ACPI_S5; + + /* + * If waking from S3 determine if deep S3 is enabled. If not, + * need to check both deep sleep well and normal suspend well. + * Otherwise just check deep sleep well. + */ + if (prev_sleep_state == ACPI_S3) { + /* PWR_FLR represents deep sleep power well loss. */ + uint32_t mask = PWR_FLR; + + /* If deep s3 isn't enabled check the suspend well too. */ + if (!deep_s3_enabled()) + mask |= SUS_PWR_FLR; + + if (ps->gen_pmcon_a & mask) + prev_sleep_state = ACPI_S5; + } + + return prev_sleep_state; +} + +void soc_fill_power_state(struct chipset_power_state *ps) +{ + uint8_t *pmc; + + ps->tco1_sts = tco_read_reg(TCO1_STS); + ps->tco2_sts = tco_read_reg(TCO2_STS); + + printk(BIOS_DEBUG, "TCO_STS: %04x %04x\n", + ps->tco1_sts, ps->tco2_sts); + + pmc = pmc_mmio_regs(); + ps->gen_pmcon_a = read32(pmc + GEN_PMCON_A); + ps->gen_pmcon_b = read32(pmc + GEN_PMCON_B); + ps->gblrst_cause[0] = read32(pmc + GBLRST_CAUSE0); + ps->gblrst_cause[1] = read32(pmc + GBLRST_CAUSE1); + + printk(BIOS_DEBUG, "GEN_PMCON: %08x %08x\n", + ps->gen_pmcon_a, ps->gen_pmcon_b); + + printk(BIOS_DEBUG, "GBLRST_CAUSE: %08x %08x\n", + ps->gblrst_cause[0], ps->gblrst_cause[1]); +} + +/* STM Support */ +uint16_t get_pmbase(void) +{ + return (uint16_t) ACPI_BASE_ADDRESS; +} diff --git a/src/soc/intel/elkhartlake/reset.c b/src/soc/intel/elkhartlake/reset.c new file mode 100644 index 0000000..8b9a7fa --- /dev/null +++ b/src/soc/intel/elkhartlake/reset.c @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <cf9_reset.h> +#include <console/console.h> +#include <intelblocks/cse.h> +#include <intelblocks/pmclib.h> +#include <fsp/util.h> +#include <soc/intel/common/reset.h> +#include <soc/pci_devs.h> + +void do_global_reset(void) +{ + /* Ask CSE to do the global reset */ + if (cse_request_global_reset(GLOBAL_RESET)) + return; + + /* global reset if CSE fail to reset */ + pmc_global_reset_enable(1); + do_full_reset(); +} + +void chipset_handle_reset(uint32_t status) +{ + switch (status) { + case FSP_STATUS_RESET_REQUIRED_3: /* Global Reset */ + printk(BIOS_DEBUG, "GLOBAL RESET!!\n"); + global_reset(); + break; + default: + printk(BIOS_ERR, "unhandled reset type %x\n", status); + die("unknown reset type"); + break; + } +} diff --git a/src/soc/intel/elkhartlake/romstage/Makefile.inc b/src/soc/intel/elkhartlake/romstage/Makefile.inc new file mode 100644 index 0000000..5a8322b --- /dev/null +++ b/src/soc/intel/elkhartlake/romstage/Makefile.inc @@ -0,0 +1,19 @@ +# +# This file is part of the coreboot project. +# +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# + +romstage-y += fsp_params.c +romstage-y += ../../../../cpu/intel/car/romstage.c +romstage-y += romstage.c +romstage-y += pch.c +romstage-y += systemagent.c diff --git a/src/soc/intel/elkhartlake/romstage/fsp_params.c b/src/soc/intel/elkhartlake/romstage/fsp_params.c new file mode 100644 index 0000000..ff39f10 --- /dev/null +++ b/src/soc/intel/elkhartlake/romstage/fsp_params.c @@ -0,0 +1,134 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <assert.h> +#include <console/console.h> +#include <fsp/util.h> +#include <soc/pci_devs.h> +#include <soc/romstage.h> +#include <soc/soc_chip.h> +#include <string.h> + +static void soc_memory_init_params(FSP_M_CONFIG *m_cfg, + const struct soc_intel_jasperlake_config *config) +{ + unsigned int i; + const struct device *dev = pcidev_path_on_root(SA_DEVFN_IGD); + uint32_t mask = 0; + + if (!dev || !dev->enabled) { + /* Skip IGD initialization in FSP if device is disabled in devicetree.cb */ + m_cfg->InternalGfx = 0; + m_cfg->IgdDvmt50PreAlloc = 0; + } else { + m_cfg->InternalGfx = 1; + /* Set IGD stolen size to 60MB. */ + m_cfg->IgdDvmt50PreAlloc = 0xFE; + } + + m_cfg->TsegSize = CONFIG_SMM_TSEG_SIZE; + m_cfg->IedSize = CONFIG_IED_REGION_SIZE; + m_cfg->SaGv = config->SaGv; + m_cfg->RMT = config->RMT; + + /* PCIe root port configuration */ + for (i = 0; i < ARRAY_SIZE(config->PcieRpEnable); i++) { + if (config->PcieRpEnable[i]) + mask |= (1 << i); + } + + m_cfg->PcieRpEnableMask = mask; + + _Static_assert(ARRAY_SIZE(m_cfg->PcieClkSrcUsage) >= + ARRAY_SIZE(config->PcieClkSrcUsage), "copy buffer overflow!"); + memcpy(m_cfg->PcieClkSrcUsage, config->PcieClkSrcUsage, + sizeof(config->PcieClkSrcUsage)); + + _Static_assert(ARRAY_SIZE(m_cfg->PcieClkSrcClkReq) >= + ARRAY_SIZE(config->PcieClkSrcClkReq), "copy buffer overflow!"); + memcpy(m_cfg->PcieClkSrcClkReq, config->PcieClkSrcClkReq, + sizeof(config->PcieClkSrcClkReq)); + + m_cfg->PrmrrSize = config->PrmrrSize; + m_cfg->EnableC6Dram = config->enable_c6dram; + + /* Disable BIOS Guard */ + m_cfg->BiosGuard = 0; + + /* Set CPU Ratio */ + m_cfg->CpuRatio = 0; + + /* Set debug interface flags */ + m_cfg->PcdDebugInterfaceFlags = CONFIG(DRIVERS_UART_8250IO) ? + DEBUG_INTERFACE_UART : DEBUG_INTERFACE_SERIAL_IO; + + /* TraceHub configuration */ + dev = pcidev_path_on_root(PCH_DEVFN_TRACEHUB); + if (dev && dev->enabled && config->TraceHubMode) { + m_cfg->PcdDebugInterfaceFlags |= DEBUG_INTERFACE_TRACEHUB; + m_cfg->PchTraceHubMode = config->TraceHubMode; + m_cfg->CpuTraceHubMode = config->TraceHubMode; + } + + /* Change VmxEnable UPD value according to ENABLE_VMX Kconfig */ + m_cfg->VmxEnable = CONFIG(ENABLE_VMX); + + + /* Enable SMBus controller based on config */ + m_cfg->SmbusEnable = config->SmbusEnable; + + /* Set debug probe type */ + m_cfg->PlatformDebugConsent = CONFIG_SOC_INTEL_ELKHARTLAKE_DEBUG_CONSENT; + + /* VT-d config */ + m_cfg->VtdDisable = 0; + + m_cfg->SerialIoUartDebugControllerNumber = CONFIG_UART_FOR_CONSOLE; + + /* Display */ + m_cfg->DdiPortAConfig = config->DdiPortAConfig; + m_cfg->DdiPortBHpd = config->DdiPortBHpd; + m_cfg->DdiPortCHpd = config->DdiPortCHpd; + m_cfg->DdiPortBDdc = config->DdiPortBDdc; + m_cfg->DdiPortCDdc = config->DdiPortCDdc; + + /* Audio */ + dev = pcidev_path_on_root(PCH_DEVFN_HDA); + if (!dev) + m_cfg->PchHdaEnable = 0; + else + m_cfg->PchHdaEnable = dev->enabled; + + m_cfg->PchHdaDspEnable = config->PchHdaDspEnable; + m_cfg->PchHdaAudioLinkHdaEnable = config->PchHdaAudioLinkHdaEnable; + + _Static_assert(ARRAY_SIZE(m_cfg->PchHdaAudioLinkDmicEnable) >= + ARRAY_SIZE(config->PchHdaAudioLinkDmicEnable), "copy buffer overflow!"); + memcpy(m_cfg->PchHdaAudioLinkDmicEnable, config->PchHdaAudioLinkDmicEnable, + sizeof(config->PchHdaAudioLinkDmicEnable)); + + _Static_assert(ARRAY_SIZE(m_cfg->PchHdaAudioLinkSspEnable) >= + ARRAY_SIZE(config->PchHdaAudioLinkSspEnable), "copy buffer overflow!"); + memcpy(m_cfg->PchHdaAudioLinkSspEnable, config->PchHdaAudioLinkSspEnable, + sizeof(config->PchHdaAudioLinkSspEnable)); + + _Static_assert(ARRAY_SIZE(m_cfg->PchHdaAudioLinkSndwEnable) >= + ARRAY_SIZE(config->PchHdaAudioLinkSndwEnable), "copy buffer overflow!"); + memcpy(m_cfg->PchHdaAudioLinkSndwEnable, config->PchHdaAudioLinkSndwEnable, + sizeof(config->PchHdaAudioLinkSndwEnable)); +} + +void platform_fsp_memory_init_params_cb(FSPM_UPD *mupd, uint32_t version) +{ + const struct soc_intel_jasperlake_config *config = config_of_soc(); + FSP_M_CONFIG *m_cfg = &mupd->FspmConfig; + + soc_memory_init_params(m_cfg, config); + + mainboard_memory_init_params(mupd); +} + +__weak void mainboard_memory_init_params(FSPM_UPD *mupd) +{ + printk(BIOS_DEBUG, "WEAK: %s/%s called\n", __FILE__, __func__); +} diff --git a/src/soc/intel/elkhartlake/romstage/pch.c b/src/soc/intel/elkhartlake/romstage/pch.c new file mode 100644 index 0000000..d56a234 --- /dev/null +++ b/src/soc/intel/elkhartlake/romstage/pch.c @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <intelblocks/smbus.h> +#include <intelblocks/tco.h> +#include <soc/romstage.h> + +void pch_init(void) +{ + /* Programming TCO_BASE_ADDRESS and TCO Timer Halt */ + tco_configure(); + + /* Program SMBUS_BASE_ADDRESS and Enable it */ + smbus_common_init(); +} diff --git a/src/soc/intel/elkhartlake/romstage/romstage.c b/src/soc/intel/elkhartlake/romstage/romstage.c new file mode 100644 index 0000000..b8e9032 --- /dev/null +++ b/src/soc/intel/elkhartlake/romstage/romstage.c @@ -0,0 +1,144 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <arch/romstage.h> +#include <cbmem.h> +#include <console/console.h> +#include <fsp/util.h> +#include <intelblocks/cfg.h> +#include <intelblocks/cse.h> +#include <intelblocks/pmclib.h> +#include <memory_info.h> +#include <soc/intel/common/smbios.h> +#include <soc/iomap.h> +#include <soc/pm.h> +#include <soc/romstage.h> +#include <soc/soc_chip.h> +#include <string.h> + +#define FSP_SMBIOS_MEMORY_INFO_GUID \ +{ \ + 0xd4, 0x71, 0x20, 0x9b, 0x54, 0xb0, 0x0c, 0x4e, \ + 0x8d, 0x09, 0x11, 0xcf, 0x8b, 0x9f, 0x03, 0x23 \ +} + +bool __weak mainboard_get_dram_part_num(const char **part_num, size_t *len) +{ + /* Default weak implementation, no need to override part number. */ + return false; +} + +/* Save the DIMM information for SMBIOS table 17 */ +static void save_dimm_info(void) +{ + int node, channel, dimm, dimm_max, index; + size_t hob_size; + const CONTROLLER_INFO *ctrlr_info; + const CHANNEL_INFO *channel_info; + const DIMM_INFO *src_dimm; + struct dimm_info *dest_dimm; + struct memory_info *mem_info; + const MEMORY_INFO_DATA_HOB *meminfo_hob; + const uint8_t smbios_memory_info_guid[16] = + FSP_SMBIOS_MEMORY_INFO_GUID; + const uint8_t *serial_num; + const char *dram_part_num = NULL; + size_t dram_part_num_len; + bool is_dram_part_overridden = false; + + /* Locate the memory info HOB, presence validated by raminit */ + meminfo_hob = fsp_find_extension_hob_by_guid( + smbios_memory_info_guid, + &hob_size); + if (meminfo_hob == NULL || hob_size == 0) { + printk(BIOS_ERR, "SMBIOS MEMORY_INFO_DATA_HOB not found\n"); + return; + } + + /* + * Allocate CBMEM area for DIMM information used to populate SMBIOS + * table 17 + */ + mem_info = cbmem_add(CBMEM_ID_MEMINFO, sizeof(*mem_info)); + if (mem_info == NULL) { + printk(BIOS_ERR, "CBMEM entry for DIMM info missing\n"); + return; + } + memset(mem_info, 0, sizeof(*mem_info)); + + /* Allow mainboard to override DRAM part number. */ + is_dram_part_overridden = mainboard_get_dram_part_num(&dram_part_num, + &dram_part_num_len); + + /* Save available DIMM information */ + index = 0; + dimm_max = ARRAY_SIZE(mem_info->dimm); + for (node = 0; node < MAX_NODE; node++) { + ctrlr_info = &meminfo_hob->Controller[node]; + for (channel = 0; channel < MAX_CH && index < dimm_max; + channel++) { + channel_info = &ctrlr_info->ChannelInfo[channel]; + if (channel_info->Status != CHANNEL_PRESENT) + continue; + + for (dimm = 0; dimm < MAX_DIMM && index < dimm_max; + dimm++) { + src_dimm = &channel_info->DimmInfo[dimm]; + dest_dimm = &mem_info->dimm[index]; + if (src_dimm->Status != DIMM_PRESENT) + continue; + + /* If there is no DRAM part number overridden by + * mainboard then use original one. */ + if (!is_dram_part_overridden) { + dram_part_num_len = sizeof(src_dimm->ModulePartNum); + dram_part_num = (const char *) + &src_dimm->ModulePartNum[0]; + } + + u8 memProfNum = meminfo_hob->MemoryProfile; + serial_num = src_dimm->SpdSave + + SPD_SAVE_OFFSET_SERIAL; + + /* Populate the DIMM information */ + dimm_info_fill(dest_dimm, + src_dimm->DimmCapacity, + meminfo_hob->MemoryType, + meminfo_hob->ConfiguredMemoryClockSpeed, + src_dimm->RankInDimm, + channel_info->ChannelId, + src_dimm->DimmId, + (const char *)src_dimm->ModulePartNum, + sizeof(src_dimm->ModulePartNum), + serial_num, + meminfo_hob->DataWidth, + meminfo_hob->VddVoltage[memProfNum], + meminfo_hob->EccSupport, + src_dimm->MfgId, + src_dimm->SpdModuleType); + index++; + } + } + } + mem_info->dimm_cnt = index; + printk(BIOS_DEBUG, "%d DIMMs found\n", mem_info->dimm_cnt); +} + +void mainboard_romstage_entry(void) +{ + bool s3wake; + struct chipset_power_state *ps = pmc_get_power_state(); + + /* Program MCHBAR, DMIBAR, GDXBAR and EDRAMBAR */ + systemagent_early_init(); + /* Program PCH init */ + pch_init(); + /* initialize Heci interface */ + heci_init(HECI1_BASE_ADDRESS); + + s3wake = pmc_fill_power_state(ps) == ACPI_S3; + fsp_memory_init(s3wake); + pmc_set_disb(); + if (!s3wake) + save_dimm_info(); +} diff --git a/src/soc/intel/elkhartlake/romstage/systemagent.c b/src/soc/intel/elkhartlake/romstage/systemagent.c new file mode 100644 index 0000000..067a480 --- /dev/null +++ b/src/soc/intel/elkhartlake/romstage/systemagent.c @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <intelblocks/systemagent.h> +#include <soc/iomap.h> +#include <soc/romstage.h> +#include <soc/systemagent.h> + +void systemagent_early_init(void) +{ + static const struct sa_mmio_descriptor soc_fixed_pci_resources[] = { + { MCHBAR, MCH_BASE_ADDRESS, MCH_BASE_SIZE, "MCHBAR" }, + { DMIBAR, DMI_BASE_ADDRESS, DMI_BASE_SIZE, "DMIBAR" }, + { EPBAR, EP_BASE_ADDRESS, EP_BASE_SIZE, "EPBAR" }, + }; + + static const struct sa_mmio_descriptor soc_fixed_mch_resources[] = { + { REGBAR, REG_BASE_ADDRESS, REG_BASE_SIZE, "REGBAR" }, + { EDRAMBAR, EDRAM_BASE_ADDRESS, EDRAM_BASE_SIZE, "EDRAMBAR" }, + }; + + /* Set Fixed MMIO address into PCI configuration space */ + sa_set_pci_bar(soc_fixed_pci_resources, + ARRAY_SIZE(soc_fixed_pci_resources)); + /* Set Fixed MMIO address into MCH base address */ + sa_set_mch_bar(soc_fixed_mch_resources, + ARRAY_SIZE(soc_fixed_mch_resources)); + /* Enable PAM registers */ + enable_pam_region(); +} diff --git a/src/soc/intel/elkhartlake/sd.c b/src/soc/intel/elkhartlake/sd.c new file mode 100644 index 0000000..f3c25e4 --- /dev/null +++ b/src/soc/intel/elkhartlake/sd.c @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <intelblocks/sd.h> +#include <soc/soc_chip.h> + +int sd_fill_soc_gpio_info(struct acpi_gpio *gpio, const struct device *dev) +{ + config_t *config = config_of(dev); + + if (!config->sdcard_cd_gpio) + return -1; + + gpio->type = ACPI_GPIO_TYPE_INTERRUPT; + gpio->pull = ACPI_GPIO_PULL_NONE; + gpio->irq.mode = ACPI_IRQ_EDGE_TRIGGERED; + gpio->irq.polarity = ACPI_IRQ_ACTIVE_BOTH; + gpio->irq.shared = ACPI_IRQ_SHARED; + gpio->irq.wake = ACPI_IRQ_WAKE; + gpio->interrupt_debounce_timeout = 10000; /* 100ms */ + gpio->pin_count = 1; + gpio->pins[0] = config->sdcard_cd_gpio; + + return 0; +} diff --git a/src/soc/intel/elkhartlake/smihandler.c b/src/soc/intel/elkhartlake/smihandler.c new file mode 100644 index 0000000..72f83c8 --- /dev/null +++ b/src/soc/intel/elkhartlake/smihandler.c @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <console/console.h> +#include <device/pci_def.h> +#include <intelblocks/cse.h> +#include <intelblocks/smihandler.h> +#include <soc/soc_chip.h> +#include <soc/pci_devs.h> +#include <soc/pm.h> + +/* + * Specific SOC SMI handler during ramstage finalize phase + * + * BIOS can't make CSME function disable as is due to POSTBOOT_SAI + * restriction in place from JSP chipset. Hence create SMI Handler to + * perform CSME function disabling logic during SMM mode. + */ +void smihandler_soc_at_finalize(void) +{ + const struct soc_intel_jasperlake_config *config; + + config = config_of_soc(); + + if (!config->HeciEnabled && CONFIG(HECI_DISABLE_USING_SMM)) + heci_disable(); +} + +const smi_handler_t southbridge_smi[SMI_STS_BITS] = { + [SMI_ON_SLP_EN_STS_BIT] = smihandler_southbridge_sleep, + [APM_STS_BIT] = smihandler_southbridge_apmc, + [PM1_STS_BIT] = smihandler_southbridge_pm1, + [GPE0_STS_BIT] = smihandler_southbridge_gpe0, + [GPIO_STS_BIT] = smihandler_southbridge_gpi, + [ESPI_SMI_STS_BIT] = smihandler_southbridge_espi, + [MCSMI_STS_BIT] = smihandler_southbridge_mc, +#if CONFIG(SOC_INTEL_COMMON_BLOCK_SMM_TCO_ENABLE) + [TCO_STS_BIT] = smihandler_southbridge_tco, +#endif + [PERIODIC_STS_BIT] = smihandler_southbridge_periodic, + [MONITOR_STS_BIT] = smihandler_southbridge_monitor, +}; diff --git a/src/soc/intel/elkhartlake/smmrelocate.c b/src/soc/intel/elkhartlake/smmrelocate.c new file mode 100644 index 0000000..be3abdf --- /dev/null +++ b/src/soc/intel/elkhartlake/smmrelocate.c @@ -0,0 +1,250 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <types.h> +#include <string.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ops.h> +#include <cpu/x86/cache.h> +#include <cpu/x86/lapic.h> +#include <cpu/x86/mp.h> +#include <cpu/x86/msr.h> +#include <cpu/x86/mtrr.h> +#include <cpu/x86/smm.h> +#include <cpu/intel/em64t101_save_state.h> +#include <cpu/intel/smm_reloc.h> +#include <console/console.h> +#include <smp/node.h> +#include <soc/cpu.h> +#include <soc/msr.h> +#include <soc/pci_devs.h> +#include <soc/soc_chip.h> +#include <soc/systemagent.h> + +static void update_save_state(int cpu, uintptr_t curr_smbase, + uintptr_t staggered_smbase, + struct smm_relocation_params *relo_params) +{ + u32 smbase; + u32 iedbase; + + /* + * The relocated handler runs with all CPUs concurrently. Therefore + * stagger the entry points adjusting SMBASE downwards by save state + * size * CPU num. + */ + smbase = staggered_smbase; + iedbase = relo_params->ied_base; + + printk(BIOS_DEBUG, "New SMBASE=0x%08x IEDBASE=0x%08x\n", + smbase, iedbase); + + /* + * All threads need to set IEDBASE and SMBASE to the relocated + * handler region. However, the save state location depends on the + * smm_save_state_in_msrs field in the relocation parameters. If + * smm_save_state_in_msrs is non-zero then the CPUs are relocating + * the SMM handler in parallel, and each CPUs save state area is + * located in their respective MSR space. If smm_save_state_in_msrs + * is zero then the SMM relocation is happening serially so the + * save state is at the same default location for all CPUs. + */ + if (relo_params->smm_save_state_in_msrs) { + msr_t smbase_msr; + msr_t iedbase_msr; + + smbase_msr.lo = smbase; + smbase_msr.hi = 0; + + /* + * According the BWG the IEDBASE MSR is in bits 63:32. It's + * not clear why it differs from the SMBASE MSR. + */ + iedbase_msr.lo = 0; + iedbase_msr.hi = iedbase; + + wrmsr(SMBASE_MSR, smbase_msr); + wrmsr(IEDBASE_MSR, iedbase_msr); + } else { + em64t101_smm_state_save_area_t *save_state; + + save_state = (void *)(curr_smbase + SMM_DEFAULT_SIZE - + sizeof(*save_state)); + + save_state->smbase = smbase; + save_state->iedbase = iedbase; + } +} + +/* Returns 1 if SMM MSR save state was set. */ +static int bsp_setup_msr_save_state(struct smm_relocation_params *relo_params) +{ + msr_t smm_mca_cap; + + smm_mca_cap = rdmsr(SMM_MCA_CAP_MSR); + if (smm_mca_cap.hi & SMM_CPU_SVRSTR_MASK) { + msr_t smm_feature_control; + + smm_feature_control = rdmsr(SMM_FEATURE_CONTROL_MSR); + smm_feature_control.hi = 0; + smm_feature_control.lo |= SMM_CPU_SAVE_EN; + wrmsr(SMM_FEATURE_CONTROL_MSR, smm_feature_control); + relo_params->smm_save_state_in_msrs = 1; + } + return relo_params->smm_save_state_in_msrs; +} + +/* + * The relocation work is actually performed in SMM context, but the code + * resides in the ramstage module. This occurs by trampolining from the default + * SMRAM entry point to here. + */ +void smm_relocation_handler(int cpu, uintptr_t curr_smbase, + uintptr_t staggered_smbase) +{ + msr_t mtrr_cap; + struct smm_relocation_params *relo_params = &smm_reloc_params; + + printk(BIOS_DEBUG, "In relocation handler: CPU %d\n", cpu); + + /* + * Determine if the processor supports saving state in MSRs. If so, + * enable it before the non-BSPs run so that SMM relocation can occur + * in parallel in the non-BSP CPUs. + */ + if (cpu == 0) { + /* + * If smm_save_state_in_msrs is 1 then that means this is the + * 2nd time through the relocation handler for the BSP. + * Parallel SMM handler relocation is taking place. However, + * it is desired to access other CPUs save state in the real + * SMM handler. Therefore, disable the SMM save state in MSRs + * feature. + */ + if (relo_params->smm_save_state_in_msrs) { + msr_t smm_feature_control; + + smm_feature_control = rdmsr(SMM_FEATURE_CONTROL_MSR); + smm_feature_control.lo &= ~SMM_CPU_SAVE_EN; + wrmsr(SMM_FEATURE_CONTROL_MSR, smm_feature_control); + } else if (bsp_setup_msr_save_state(relo_params)) + /* + * Just return from relocation handler if MSR save + * state is enabled. In that case the BSP will come + * back into the relocation handler to setup the new + * SMBASE as well disabling SMM save state in MSRs. + */ + return; + } + + /* Make appropriate changes to the save state map. */ + update_save_state(cpu, curr_smbase, staggered_smbase, relo_params); + + /* Write SMRR MSRs based on indicated support. */ + mtrr_cap = rdmsr(MTRR_CAP_MSR); + if (mtrr_cap.lo & SMRR_SUPPORTED) + write_smrr(relo_params); +} + +static void fill_in_relocation_params(struct smm_relocation_params *params) +{ + uintptr_t tseg_base; + size_t tseg_size; + /* All range registers are aligned to 4KiB */ + const u32 rmask = ~(4 * KiB - 1); + + smm_region(&tseg_base, &tseg_size); + + if (!IS_ALIGNED(tseg_base, tseg_size)) { + printk(BIOS_WARNING, + "TSEG base not aligned with TSEG SIZE! Not setting SMRR\n"); + return; + } + + smm_subregion(SMM_SUBREGION_CHIPSET, &params->ied_base, &params->ied_size); + + /* SMRR has 32-bits of valid address aligned to 4KiB. */ + params->smrr_base.lo = (tseg_base & rmask) | MTRR_TYPE_WRBACK; + params->smrr_base.hi = 0; + params->smrr_mask.lo = (~(tseg_size - 1) & rmask) | MTRR_PHYS_MASK_VALID; + params->smrr_mask.hi = 0; +} + +static void setup_ied_area(struct smm_relocation_params *params) +{ + char *ied_base; + + struct ied_header ied = { + .signature = "INTEL RSVD", + .size = params->ied_size, + .reserved = {0}, + }; + + ied_base = (void *)params->ied_base; + + printk(BIOS_DEBUG, "IED base = 0x%08x\n", (u32)params->ied_base); + printk(BIOS_DEBUG, "IED size = 0x%08x\n", (u32)params->ied_size); + + /* Place IED header at IEDBASE. */ + memcpy(ied_base, &ied, sizeof(ied)); + + /* Zero out 32KiB at IEDBASE + 1MiB */ + memset(ied_base + 1 * MiB, 0, 32 * KiB); +} + +void smm_info(uintptr_t *perm_smbase, size_t *perm_smsize, + size_t *smm_save_state_size) +{ + printk(BIOS_DEBUG, "Setting up SMI for CPU\n"); + + fill_in_relocation_params(&smm_reloc_params); + + smm_subregion(SMM_SUBREGION_HANDLER, perm_smbase, perm_smsize); + + if (smm_reloc_params.ied_size) + setup_ied_area(&smm_reloc_params); + + *smm_save_state_size = sizeof(em64t101_smm_state_save_area_t); +} + +void smm_initialize(void) +{ + /* Clear the SMM state in the southbridge. */ + smm_southbridge_clear_state(); + + /* + * Run the relocation handler for on the BSP to check and set up + * parallel SMM relocation. + */ + smm_initiate_relocation(); + + if (smm_reloc_params.smm_save_state_in_msrs) + printk(BIOS_DEBUG, "Doing parallel SMM relocation.\n"); +} + +void smm_relocate(void) +{ + /* + * If smm_save_state_in_msrs is non-zero then parallel SMM relocation + * shall take place. Run the relocation handler a second time on the + * BSP to do * the final move. For APs, a relocation handler always + * needs to be run. + */ + if (smm_reloc_params.smm_save_state_in_msrs) + smm_initiate_relocation_parallel(); + else if (!boot_cpu()) + smm_initiate_relocation(); +} + +void smm_lock(void) +{ + struct device *sa_dev = pcidev_path_on_root(SA_DEVFN_ROOT); + /* + * LOCK the SMM memory window and enable normal SMM. + * After running this function, only a full reset can + * make the SMM registers writable again. + */ + printk(BIOS_DEBUG, "Locking SMM.\n"); + pci_write_config8(sa_dev, SMRAM, D_LCK | G_SMRAME | C_BASE_SEG); +} diff --git a/src/soc/intel/elkhartlake/spi.c b/src/soc/intel/elkhartlake/spi.c new file mode 100644 index 0000000..9f3f44a --- /dev/null +++ b/src/soc/intel/elkhartlake/spi.c @@ -0,0 +1,32 @@ +/* + * This file is part of the coreboot project. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <intelblocks/spi.h> +#include <soc/pci_devs.h> + +int spi_soc_devfn_to_bus(unsigned int devfn) +{ + switch (devfn) { + case PCH_DEVFN_SPI: + return 0; + case PCH_DEVFN_GSPI0: + return 1; + case PCH_DEVFN_GSPI1: + return 2; + case PCH_DEVFN_GSPI2: + return 3; + } + return -1; +} diff --git a/src/soc/intel/elkhartlake/systemagent.c b/src/soc/intel/elkhartlake/systemagent.c new file mode 100644 index 0000000..7be471a --- /dev/null +++ b/src/soc/intel/elkhartlake/systemagent.c @@ -0,0 +1,63 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ops.h> +#include <intelblocks/systemagent.h> +#include <soc/iomap.h> +#include <soc/systemagent.h> + +/* + * SoC implementation + * + * Add all known fixed memory ranges for Host Controller/Memory + * controller. + */ +void soc_add_fixed_mmio_resources(struct device *dev, int *index) +{ + static const struct sa_mmio_descriptor soc_fixed_resources[] = { + { PCIEXBAR, CONFIG_MMCONF_BASE_ADDRESS, CONFIG_SA_PCIEX_LENGTH, + "PCIEXBAR" }, + { MCHBAR, MCH_BASE_ADDRESS, MCH_BASE_SIZE, "MCHBAR" }, + { DMIBAR, DMI_BASE_ADDRESS, DMI_BASE_SIZE, "DMIBAR" }, + { EPBAR, EP_BASE_ADDRESS, EP_BASE_SIZE, "EPBAR" }, + { REGBAR, REG_BASE_ADDRESS, REG_BASE_SIZE, "REGBAR" }, + { EDRAMBAR, EDRAM_BASE_ADDRESS, EDRAM_BASE_SIZE, "EDRAMBAR" }, + /* + * PMC pci device gets hidden from PCI bus due to Silicon + * policy hence binding PMCBAR aka PWRMBASE (offset 0x10) with + * SA resources to ensure that PMCBAR falls under PCI reserved + * memory range. + * + * Note: Don't add any more resource with same offset 0x10 + * under this device space. + */ + { PCI_BASE_ADDRESS_0, PCH_PWRM_BASE_ADDRESS, PCH_PWRM_BASE_SIZE, + "PMCBAR" }, + }; + + sa_add_fixed_mmio_resources(dev, index, soc_fixed_resources, + ARRAY_SIZE(soc_fixed_resources)); + + /* Add Vt-d resources if VT-d is enabled */ + if ((pci_read_config32(dev, CAPID0_A) & VTD_DISABLE)) + return; + + sa_add_fixed_mmio_resources(dev, index, soc_vtd_resources, + ARRAY_SIZE(soc_vtd_resources)); +} + +/* + * SoC implementation + * + * Perform System Agent Initialization during Ramstage phase. + */ +void soc_systemagent_init(struct device *dev) +{ + /* Enable Power Aware Interrupt Routing */ + enable_power_aware_intr(); + + /* Enable BIOS Reset CPL */ + enable_bios_reset_cpl(); +} diff --git a/src/soc/intel/elkhartlake/uart.c b/src/soc/intel/elkhartlake/uart.c new file mode 100644 index 0000000..83866c3 --- /dev/null +++ b/src/soc/intel/elkhartlake/uart.c @@ -0,0 +1,58 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <console/console.h> +#include <device/pci_def.h> +#include <intelblocks/gpio.h> +#include <intelblocks/lpss.h> +#include <intelblocks/pcr.h> +#include <intelblocks/uart.h> +#include <soc/iomap.h> +#include <soc/pch.h> +#include <soc/pci_devs.h> +#include <soc/pcr_ids.h> + +const struct uart_gpio_pad_config uart_gpio_pads[] = { + { + .console_index = 0, + .gpios = { + PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1), /* UART0 RX */ + PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1), /* UART0 TX */ + }, + }, + { + .console_index = 1, + .gpios = { + PAD_CFG_NF(GPP_C12, NONE, DEEP, NF1), /* UART1 RX */ + PAD_CFG_NF(GPP_C13, NONE, DEEP, NF1), /* UART1 TX */ + }, + }, + { + .console_index = 2, + .gpios = { + PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), /* UART2 RX */ + PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), /* UART2 TX */ + }, + } +}; + +const int uart_max_index = ARRAY_SIZE(uart_gpio_pads); + +DEVTREE_CONST struct device *soc_uart_console_to_device(int uart_console) +{ + /* + * if index is valid, this function will return corresponding structure + * for uart console else will return NULL. + */ + switch (uart_console) { + case 0: + return pcidev_path_on_root(PCH_DEVFN_UART0); + case 1: + return pcidev_path_on_root(PCH_DEVFN_UART1); + case 2: + return pcidev_path_on_root(PCH_DEVFN_UART2); + default: + printk(BIOS_ERR, "Invalid UART console index\n"); + return NULL; + } +} -- To view, visit https://review.coreboot.org/c/coreboot/+/40851 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I5d23664d3d773526d76d48fbab70c1aacc6fe7b9 Gerrit-Change-Number: 40851 Gerrit-PatchSet: 1 Gerrit-Owner: Lean Sheng Tan <lean.sheng.tan(a)intel.com> Gerrit-MessageType: newchange

4 4

Change in coreboot[master]: [TEST-ONLY] Enable ISST for all waddledee builds
by Aamir Bohra (Code Review) 25 Aug '20

25 Aug '20

Aamir Bohra has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/42900 ) Change subject: [TEST-ONLY] Enable ISST for all waddledee builds ...................................................................... [TEST-ONLY] Enable ISST for all waddledee builds Change-Id: I9b7a3ae7d0890cf3e887278700730672a1b08627 Signed-off-by: Aamir Bohra <aamir.bohra(a)intel.com> --- M src/mainboard/google/dedede/variants/waddledee/Makefile.inc 1 file changed, 0 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/00/42900/1 diff --git a/src/mainboard/google/dedede/variants/waddledee/Makefile.inc b/src/mainboard/google/dedede/variants/waddledee/Makefile.inc index eda535c..566f5cc 100644 --- a/src/mainboard/google/dedede/variants/waddledee/Makefile.inc +++ b/src/mainboard/google/dedede/variants/waddledee/Makefile.inc @@ -1,5 +1,3 @@ ## SPDX-License-Identifier: GPL-2.0-or-later romstage-y += memory.c - -ramstage-y += variant.c -- To view, visit https://review.coreboot.org/c/coreboot/+/42900 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I9b7a3ae7d0890cf3e887278700730672a1b08627 Gerrit-Change-Number: 42900 Gerrit-PatchSet: 1 Gerrit-Owner: Aamir Bohra <aamir.bohra(a)intel.com> Gerrit-MessageType: newchange

1 3

Change in coreboot[master]: soc/intel/common: Add restore and enable GPIO PM
by EricR Lai (Code Review) 25 Aug '20

25 Aug '20

EricR Lai has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/41712 ) Change subject: soc/intel/common: Add restore and enable GPIO PM ...................................................................... soc/intel/common: Add restore and enable GPIO PM Enable GPIO clock gating when enter s0ix/Sx and save the PM bits. Restore the PM bits when exit s0ix/Sx. This reference CB:37685. BUG=b:157280323 TEST=Check GPIO PM bits when enter/exit s0ix are expected Signed-off-by: Eric Lai <ericr_lai(a)compal.corp-partner.google.com> Change-Id: If5e4553d568a872de234a2d671118acbae0a6159 --- M src/soc/intel/common/acpi/gpio.asl 1 file changed, 42 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/12/41712/1 diff --git a/src/soc/intel/common/acpi/gpio.asl b/src/soc/intel/common/acpi/gpio.asl index dbfa7af..7176334 100644 --- a/src/soc/intel/common/acpi/gpio.asl +++ b/src/soc/intel/common/acpi/gpio.asl @@ -16,3 +16,45 @@ PCRO (Local0, GPIO_MISCCFG, Arg1 & MISCCFG_ENABLE_GPIO_PM_CONFIG) } } + + +/* GPIO Power Management bits */ +Name(GPMB, Package(TOTAL_GPIO_COMM) {0}) + +/* + * Save GPIO Power Management bits + */ +Method (SGPM, 0, Serialized) +{ + For (Local0 = 0, Local0 < TOTAL_GPIO_COMM, Local0++) + { + Local1 = GPID (Local0) + GPMB[Local0] = PCRR (Local1, GPIO_MISCCFG) + } +} + +/* + * Restore GPIO Power Management bits + */ +Method (RGPM, 0, Serialized) +{ + For (Local0 = 0, Local0 < TOTAL_GPIO_COMM, Local0++) + { + CGPM (Local0, DerefOf(GPMB[Local0])) + } +} + +/* + * Save current setting of GPIO Power Management bits and + * enable all Power Management bits for all communities + */ +Method (EGPM, 0, Serialized) +{ + /* Save current setting and will restore it when resuming */ + SGPM () + /* Enable PM bits */ + For (Local0 = 0, Local0 < TOTAL_GPIO_COMM, Local0++) + { + CGPM (Local0, MISCCFG_ENABLE_GPIO_PM_CONFIG) + } +} -- To view, visit https://review.coreboot.org/c/coreboot/+/41712 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: If5e4553d568a872de234a2d671118acbae0a6159 Gerrit-Change-Number: 41712 Gerrit-PatchSet: 1 Gerrit-Owner: EricR Lai <ericr_lai(a)compal.corp-partner.google.com> Gerrit-MessageType: newchange

4 32

Change in coreboot[master]: soc/amd/picasso: Add console & timestamp buffers to psp_verstage
by Martin Roth (Code Review) 24 Aug '20

24 Aug '20

Martin Roth has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/42830 ) Change subject: soc/amd/picasso: Add console & timestamp buffers to psp_verstage ...................................................................... soc/amd/picasso: Add console & timestamp buffers to psp_verstage Create areas for console & timestamp data in psp_verstage and pass it to the x86 to save for use later. BUG=b:159220781 TEST=Build & Boot trembyle Signed-off-by: Martin Roth <martin(a)coreboot.org> Change-Id: I41c8d7a1565e761187e941d7d6021805a9744d06 --- M src/soc/amd/picasso/memlayout_psp_verstage.ld M src/soc/amd/picasso/psp_verstage/psp_verstage.c 2 files changed, 15 insertions(+), 6 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/30/42830/1 diff --git a/src/soc/amd/picasso/memlayout_psp_verstage.ld b/src/soc/amd/picasso/memlayout_psp_verstage.ld index fe70f08..764c3e3 100644 --- a/src/soc/amd/picasso/memlayout_psp_verstage.ld +++ b/src/soc/amd/picasso/memlayout_psp_verstage.ld @@ -15,6 +15,8 @@ #define VBOOT_WORK_START 0x24000 #define VBOOT_WORK_SIZE 12K #define FMAP_CACHE_SIZE 2K +#define PSP_CONSOLE_SIZE CONFIG_PRERAM_CBMEM_CONSOLE_SIZE +#define PSP_TIMESTAMP_SIZE 0x100 /* * The temp stack can be made much smaller if needed - even 256 bytes @@ -53,6 +55,8 @@ _everstage = _verstage + VERSTAGE_SIZE; REGION(vboot2_work, VERSTAGE_START + VERSTAGE_SIZE, VBOOT_WORK_SIZE, 64) + PRERAM_CBMEM_CONSOLE(., PSP_CONSOLE_SIZE) + TIMESTAMP(., PSP_TIMESTAMP_SIZE) FMAP_CACHE(., FMAP_SIZE) diff --git a/src/soc/amd/picasso/psp_verstage/psp_verstage.c b/src/soc/amd/picasso/psp_verstage/psp_verstage.c index bac0548..b13edb7 100644 --- a/src/soc/amd/picasso/psp_verstage/psp_verstage.c +++ b/src/soc/amd/picasso/psp_verstage/psp_verstage.c @@ -108,15 +108,20 @@ } printk(BIOS_DEBUG, "\nMaximum buffer size: %d bytes\n", max_buffer_size); - retval = vb2api_relocate(_vboot2_work, _vboot2_work, buffer_size, ctx); - if (retval != VB2_SUCCESS) { - printk(BIOS_ERR, "Error shrinking workbuf. Error code %#x\n", retval); - buffer_size = VB2_FIRMWARE_WORKBUF_RECOMMENDED_SIZE; - post_code(POSTCODE_WORKBUF_RESIZE_WARNING); + /* Shrink workbuf if MP2 is in use and cannot be used to save buffer */ + if (max_buffer_size < VB2_FIRMWARE_WORKBUF_RECOMMENDED_SIZE) { + retval = vb2api_relocate(_vboot2_work, _vboot2_work, buffer_size, ctx); + if (retval != VB2_SUCCESS) { + printk(BIOS_ERR, "Error shrinking workbuf. Error code %#x\n", retval); + buffer_size = VB2_FIRMWARE_WORKBUF_RECOMMENDED_SIZE; + post_code(POSTCODE_WORKBUF_RESIZE_WARNING); + } + } else { + buffer_size = (uint32_t)((uintptr_t)_etimestamp - (uintptr_t)_vboot2_work) } if (buffer_size > max_buffer_size) { - printk(BIOS_ERR, "Error: Workbuf is larger than max buffer size.\n"); + printk(BIOS_ERR, "Error: Buffer is larger than max buffer size.\n"); post_code(POSTCODE_WORKBUF_BUFFER_SIZE_ERROR); return POSTCODE_WORKBUF_BUFFER_SIZE_ERROR; } -- To view, visit https://review.coreboot.org/c/coreboot/+/42830 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I41c8d7a1565e761187e941d7d6021805a9744d06 Gerrit-Change-Number: 42830 Gerrit-PatchSet: 1 Gerrit-Owner: Martin Roth <martinroth(a)google.com> Gerrit-MessageType: newchange

7 22

Change in coreboot[master]: libpayload: Cache physical cbmem console address
by Nico Huber (Code Review) 24 Aug '20

24 Aug '20

Hello Julius Werner, Reto Buerki, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/37478 to review the following change. Change subject: libpayload: Cache physical cbmem console address ...................................................................... libpayload: Cache physical cbmem console address Same as with other consoles and drivers that cache an address outside the payload (e.g. video/corebootfb), we should store the physical address, so we can derive the virtual address on demand. This makes it save to use the address across relocations. Fixes the default build of FILO, tested with Qemu/i440FX and Qemu/Q35. Change-Id: I4b8434af69e0526f78523ae61981a15abb1295b0 Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M payloads/libpayload/drivers/cbmem_console.c 1 file changed, 17 insertions(+), 12 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/78/37478/1 diff --git a/payloads/libpayload/drivers/cbmem_console.c b/payloads/libpayload/drivers/cbmem_console.c index 9435e1c..35a8d3a 100644 --- a/payloads/libpayload/drivers/cbmem_console.c +++ b/payloads/libpayload/drivers/cbmem_console.c @@ -39,7 +39,7 @@ #define CURSOR_MASK ((1 << 28) - 1) #define OVERFLOW (1 << 31) -static struct cbmem_console *cbmem_console_p; +static uintptr_t cbmem_console_p; static struct console_output_driver cbmem_console_driver = { @@ -48,27 +48,32 @@ static void do_write(const void *buffer, size_t count) { - memcpy(cbmem_console_p->body + (cbmem_console_p->cursor & CURSOR_MASK), - buffer, count); - cbmem_console_p->cursor += count; + struct cbmem_console *const cbmem_con = phys_to_virt(cbmem_console_p); + + memcpy(cbmem_con->body + (cbmem_con->cursor & CURSOR_MASK), buffer, count); + cbmem_con->cursor += count; } void cbmem_console_init(void) { - cbmem_console_p = lib_sysinfo.cbmem_cons; - if (cbmem_console_p && cbmem_console_p->size) + /* We might have been called before relocation (like FILO does). So + just keep the physical address which won't break on relocation. */ + cbmem_console_p = virt_to_phys(lib_sysinfo.cbmem_cons); + + struct cbmem_console *const cbmem_con = phys_to_virt(cbmem_console_p); + if (cbmem_console_p && cbmem_con->size) console_add_output_driver(&cbmem_console_driver); } void cbmem_console_write(const void *buffer, size_t count) { - while ((cbmem_console_p->cursor & CURSOR_MASK) + count >= - cbmem_console_p->size) { - size_t still_fits = cbmem_console_p->size - - (cbmem_console_p->cursor & CURSOR_MASK); + struct cbmem_console *const cbmem_con = phys_to_virt(cbmem_console_p); + + while ((cbmem_con->cursor & CURSOR_MASK) + count >= cbmem_con->size) { + size_t still_fits = cbmem_con->size - (cbmem_con->cursor & CURSOR_MASK); do_write(buffer, still_fits); - cbmem_console_p->cursor &= ~CURSOR_MASK; - cbmem_console_p->cursor |= OVERFLOW; + cbmem_con->cursor &= ~CURSOR_MASK; + cbmem_con->cursor |= OVERFLOW; buffer += still_fits; count -= still_fits; } -- To view, visit https://review.coreboot.org/c/coreboot/+/37478 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I4b8434af69e0526f78523ae61981a15abb1295b0 Gerrit-Change-Number: 37478 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Julius Werner <jwerner(a)chromium.org> Gerrit-Reviewer: Reto Buerki <reet(a)codelabs.ch> Gerrit-MessageType: newchange

6 25

Change in coreboot[master]: soc/intel/common: Add downgrade support for CSE Firmware
by Sridhar Siricilla (Code Review) 24 Aug '20

24 Aug '20

Sridhar Siricilla has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/40561 ) Change subject: soc/intel/common: Add downgrade support for CSE Firmware ...................................................................... soc/intel/common: Add downgrade support for CSE Firmware Add downgrade support for CSE RW firmware. When CSE FW is downgraded, CSE may get into data compatible issues. To avoid the data compatible issues, coreboot sends DATA CLEAR HECI command to CSE to clear CSE run time data on preventive basis during adowngrade and when CSE indicate the data mismatch error through GET_BOOT_PARTITION_INFO. BUG=b:144894771 TEST=Verified on hatch Signed-off-by: Sridhar Siricilla <sridhar.siricilla(a)intel.com Change-Id: I0a3a3036e448e5a743398f6b27e8e62965dbff3c --- M src/soc/intel/common/block/cse/custom_bp.c M src/soc/intel/common/block/include/intelblocks/cse.h 2 files changed, 89 insertions(+), 6 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/61/40561/1 diff --git a/src/soc/intel/common/block/cse/custom_bp.c b/src/soc/intel/common/block/cse/custom_bp.c index 9aea0ee..379eb03 100644 --- a/src/soc/intel/common/block/cse/custom_bp.c +++ b/src/soc/intel/common/block/cse/custom_bp.c @@ -80,6 +80,11 @@ */ BP_STATUS_PARTITION_NOT_PRESENT = 2, + /* + * This value is returned when unexpected issues detected in CSE Data area + * and CSE TCB-SVN downgrade scenario. + */ + BP_STATUS_DATA_MISMATCH_ERROR = 3, }; /* @@ -449,7 +454,45 @@ cse_bp->end_offset); } -static bool cse_prep_for_rw_update(struct cse_bp_info *cse_bp_info) +static bool cse_data_clear_request(struct cse_bp_info *cse_bp_info) +{ + struct data_clr_request { + struct mkhi_hdr hdr; + uint8_t reserved[4]; + } __packed; + + struct data_clr_request data_clr_rq = { + .hdr.group_id = MKHI_GROUP_ID_BUP_COMMON, + .hdr.command = MKHI_BUP_COMMON_DATA_CLEAR, + .reserved = {0}, + }; + + if (!cse_is_hfs1_cws_normal() || !cse_is_hfs1_com_soft_temp_disable() || + cse_get_current_bp(cse_bp_info) != RO) { + printk(BIOS_ERR, "cse_bp: CSE doesnn't meet DATA CLEAR cmd prerequisites\n"); + return false; + } + + printk(BIOS_DEBUG, "cse_bp: Sending DATA CLEAR HECI command\n"); + + struct mkhi_hdr data_clr_rsp; + size_t data_clr_rsp_sz = sizeof(data_clr_rsp); + + if (!heci_send_receive(&data_clr_rq, sizeof(data_clr_rq), &data_clr_rsp, + &data_clr_rsp_sz)) { + return false; + } + + if (data_clr_rsp.result) { + printk(BIOS_ERR, "cse_bp: CSE DATA CLEAR command response failed: %d\n", + data_clr_rsp.result); + return false; + } + + return true; +} + +static bool cse_prep_for_rw_update(struct cse_bp_info *cse_bp_info, uint32_t fw_downgrade) { /* * To set CSE's operation mode to HMRFPO mode: @@ -459,6 +502,11 @@ if (!cse_boot_to_ro(cse_bp_info)) return false; + if (fw_downgrade) { + if (!cse_data_clear_request(cse_bp_info)) + return false; + } + if (!cse_hmrfpo_enable()) return false; @@ -514,9 +562,42 @@ return cse_cbfs_rw_ver->build - cse_rw_ver->build; } +/* Checks RW Data partition is valid or not */ +static bool cse_is_rw_dp_valid(struct cse_bp_info *cse_bp_info) +{ + struct cse_bp_entry *rw_bp; + + rw_bp = cse_get_bp_entry(RW, cse_bp_info); + if (rw_bp->status == BP_STATUS_DATA_MISMATCH_ERROR) { + printk(BIOS_ERR, "cse_bp: RW data partition is not valid\n"); + return false; + } + return true; +} + +static bool cse_is_fw_downgrade(struct cse_bp_info *cse_bp_info, void *cse_cbfs_rw_n_ver) +{ + return cse_check_version_mismatch(cse_bp_info, cse_cbfs_rw_n_ver) < 0; +} + +/* Issues DATA_CLEAR HECI command and reset if RW boot partition indicates DATA_ERROR */ +static bool cse_fix_data_mismatch_err(struct cse_bp_info *cse_bp_info) +{ + if (cse_is_rw_dp_valid(cse_bp_info)) + return true; + + if (!cse_data_clear_request(cse_bp_info)) + return false; + + /* no return is exepected */ + cse_boot_to_rw(cse_bp_info, 1); + + /* Control never reaches here */ + return false; +} + static bool cse_erase_rw_region(struct region_device *target_rdev) { - if (rdev_eraseat(target_rdev, 0, region_device_sz(target_rdev)) < 0) { printk(BIOS_ERR, "cse_bp: CSE RW partition could not be erased\n"); return false; @@ -589,8 +670,9 @@ static bool cse_write_to_rw(struct cse_bp_info *cse_bp_info, struct region_device *target_rdev, void *cse_cbfs_rw_n_ver, size_t cse_cbfs_rw_n_ver_sz) { + uint32_t fw_downgrade = cse_is_fw_downgrade(cse_bp_info, cse_cbfs_rw_n_ver); - if (!cse_prep_for_rw_update(cse_bp_info)) + if (!cse_prep_for_rw_update(cse_bp_info, fw_downgrade)) return false; if (!cse_erase_rw_region(target_rdev)) @@ -638,8 +720,6 @@ return false; } - rdev_munmap(source_rw_n_ver_rdev, cse_cbfs_rw_n_ver); - /* Global Reset is required as CSE firmware update is successful */ *rst_req = 1; return true; @@ -674,6 +754,9 @@ return; } + if (!cse_fix_data_mismatch_err(&cse_bp_info.bp_info)) + goto failed; + struct region_device target_rdev; struct region_device source_rw_n_ver_rdev; diff --git a/src/soc/intel/common/block/include/intelblocks/cse.h b/src/soc/intel/common/block/include/intelblocks/cse.h index 6b91a4d..2367b68 100644 --- a/src/soc/intel/common/block/include/intelblocks/cse.h +++ b/src/soc/intel/common/block/include/intelblocks/cse.h @@ -41,7 +41,7 @@ /* Boot partition info and set boot partition info command ids */ #define MKHI_BUP_COMMON_GET_BOOT_PARTITION_INFO 0x1c #define MKHI_BUP_COMMON_SET_BOOT_PARTITION_INFO 0x1d - +#define MKHI_BUP_COMMON_DATA_CLEAR 0x20 /* ME Current Working States */ #define ME_HFS1_CWS_NORMAL 0x5 -- To view, visit https://review.coreboot.org/c/coreboot/+/40561 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I0a3a3036e448e5a743398f6b27e8e62965dbff3c Gerrit-Change-Number: 40561 Gerrit-PatchSet: 1 Gerrit-Owner: Sridhar Siricilla <sridhar.siricilla(a)intel.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newchange

8 37

Change in coreboot[master]: [WIP]cpu/x86/sipi: Add x86_64 support
by Patrick Rudolph (Code Review) 24 Aug '20

24 Aug '20

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37395 ) Change subject: [WIP]cpu/x86/sipi: Add x86_64 support ...................................................................... [WIP]cpu/x86/sipi: Add x86_64 support Enter long mode on secondary APs. Tested on Lenovo T410 with additional x86_64 patches. Change-Id: I916dd8482d56c7509af9ad0d3b9c28bdc48fd0b1 Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M src/cpu/x86/64bit/entry64.inc M src/cpu/x86/sipi_vector.S 2 files changed, 24 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/95/37395/1 diff --git a/src/cpu/x86/64bit/entry64.inc b/src/cpu/x86/64bit/entry64.inc index f726fab..7649f46 100644 --- a/src/cpu/x86/64bit/entry64.inc +++ b/src/cpu/x86/64bit/entry64.inc @@ -29,7 +29,12 @@ #endif #include <cpu/x86/msr.h> +#if defined(__RAMSTAGE__) +#include <arch/ram_segs.h> +#else #include <arch/rom_segs.h> +#endif + setup_longmode: /* Get page table address */ @@ -55,7 +60,12 @@ movl %eax, %cr0 /* use long jump to switch to 64-bit code segment */ +#if defined(__RAMSTAGE__) + ljmp $RAM_CODE_SEG64, $__longmode_start +#else ljmp $ROM_CODE_SEG64, $__longmode_start + +#endif .code64 __longmode_start: diff --git a/src/cpu/x86/sipi_vector.S b/src/cpu/x86/sipi_vector.S index f75a1c9..e06baa2 100644 --- a/src/cpu/x86/sipi_vector.S +++ b/src/cpu/x86/sipi_vector.S @@ -204,11 +204,25 @@ mov %eax, %cr4 #endif +#ifdef __x86_64__ +#define __RAMSTAGE__ 1 + /* entry64.inc preserves ebx. */ +#include <cpu/x86/64bit/entry64.inc> + + mov %rsi, %rdi /* cpu_num */ + + movl c_handler, %eax + call *%rax +#else /* c_handler(cpu_num), preserve proper stack alignment */ sub $12, %esp push %esi /* cpu_num */ + mov c_handler, %eax call *%eax +#endif + + halt_jump: hlt jmp halt_jump -- To view, visit https://review.coreboot.org/c/coreboot/+/37395 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I916dd8482d56c7509af9ad0d3b9c28bdc48fd0b1 Gerrit-Change-Number: 37395 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-Reviewer: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-MessageType: newchange

3 4

Change in coreboot[master]: soc/intel/cnl: Configure PcieRpSlotImplemented
by Felix Singer (Code Review) 23 Aug '20

23 Aug '20

Hello Nico Huber, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/39986 to review the following change. Change subject: soc/intel/cnl: Configure PcieRpSlotImplemented ...................................................................... soc/intel/cnl: Configure PcieRpSlotImplemented Default was probably the opposite, so all devicetrees would need an update. Change-Id: I6c57ab0ae50a37cd9a90786134e9056851a86a3c Signed-off-by: Nico Huber <nico.huber(a)secunet.com> --- M src/soc/intel/cannonlake/chip.h M src/soc/intel/cannonlake/fsp_params.c 2 files changed, 4 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/86/39986/1 diff --git a/src/soc/intel/cannonlake/chip.h b/src/soc/intel/cannonlake/chip.h index 7794fd4..563e13f 100644 --- a/src/soc/intel/cannonlake/chip.h +++ b/src/soc/intel/cannonlake/chip.h @@ -187,6 +187,8 @@ uint8_t PcieClkSrcClkReq[CONFIG_MAX_PCIE_CLOCKS]; /* PCIe LTR(Latency Tolerance Reporting) mechanism */ uint8_t PcieRpLtrEnable[CONFIG_MAX_ROOT_PORTS]; + /* Implemented as slot or built-in? */ + uint8_t PcieRpSlotImplemented[CONFIG_MAX_ROOT_PORTS]; /* Enable/Disable HotPlug support for Root Port */ uint8_t PcieRpHotPlug[CONFIG_MAX_ROOT_PORTS]; diff --git a/src/soc/intel/cannonlake/fsp_params.c b/src/soc/intel/cannonlake/fsp_params.c index 4634806..c35d21b 100644 --- a/src/soc/intel/cannonlake/fsp_params.c +++ b/src/soc/intel/cannonlake/fsp_params.c @@ -330,6 +330,8 @@ sizeof(config->PcieClkSrcClkReq)); memcpy(params->PcieRpLtrEnable, config->PcieRpLtrEnable, sizeof(config->PcieRpLtrEnable)); + memcpy(params->PcieRpSlotImplemented, config->PcieRpSlotImplemented, + sizeof(config->PcieRpSlotImplemented)); memcpy(params->PcieRpHotPlug, config->PcieRpHotPlug, sizeof(config->PcieRpHotPlug)); -- To view, visit https://review.coreboot.org/c/coreboot/+/39986 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I6c57ab0ae50a37cd9a90786134e9056851a86a3c Gerrit-Change-Number: 39986 Gerrit-PatchSet: 1 Gerrit-Owner: Felix Singer <felixsinger(a)posteo.net> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

6 19

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit June 2020