coreboot-gerrit February 2015

coreboot-gerrit@coreboot.org

1 participants
509 discussions

New patch to review for coreboot: d075a0b pcengines/apu1: Workaround PCI reset issue [NOTFORMERGE]
by Kyösti Mälkki 02 Feb '15

02 Feb '15

Kyösti Mälkki (kyosti.malkki(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/8330 -gerrit commit d075a0b50ec5c0d80c0bd34b795bc7b05e200bff Author: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Date: Wed Jan 28 16:36:28 2015 +0200 pcengines/apu1: Workaround PCI reset issue [NOTFORMERGE] This patch is extracted from SAGE release pcengines.apu_139_osp.tar.gz. Change-Id: Ie5653fce2614066f735e497f835c77d09e8b6b22 Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> --- src/include/reset.h | 6 ++++++ src/southbridge/amd/cimx/sb800/bootblock.c | 16 ++++++++++++++++ 2 files changed, 22 insertions(+) diff --git a/src/include/reset.h b/src/include/reset.h index 9430ffe..56f703d 100644 --- a/src/include/reset.h +++ b/src/include/reset.h @@ -10,3 +10,9 @@ void soft_reset(void); void cpu_reset(void); #endif + +#define PCI_RESET_REGISTER 0xcf9 +#define SYS_RST_BIT (1 << 1) +#define RST_CPU_BIT (1 << 2) +#define PCI_COLD_RESET ( SYS_RST_BIT | RST_CPU_BIT ) +#define PCI_WARM_RESET RST_CPU_BIT diff --git a/src/southbridge/amd/cimx/sb800/bootblock.c b/src/southbridge/amd/cimx/sb800/bootblock.c index 188ba29..b1119cc 100644 --- a/src/southbridge/amd/cimx/sb800/bootblock.c +++ b/src/southbridge/amd/cimx/sb800/bootblock.c @@ -18,6 +18,7 @@ */ #include <arch/io.h> +#include <reset.h> static void enable_rom(void) { @@ -111,6 +112,21 @@ static void enable_clocks(void) static void bootblock_southbridge_init(void) { + u32 dword; + device_t dev; + + /* Check the value of index 0x44 of BDF 0:14.3. + * A non-zero value indicates that a improper reset + * occurred and that a hard-reset should be performed. + */ + dev = PCI_DEV(0, 0x14, 0x03); + dword = pci_io_read_config32(dev, 0x44); + if (dword != 0x00000000) { + outb( 0x00, PCI_RESET_REGISTER); + outb( PCI_COLD_RESET, PCI_RESET_REGISTER); + while(1) ; + } + /* Setup the rom access for 2M */ enable_rom(); enable_prefetch();

1 0

New patch to review for coreboot: b9e4df8 AMD cimx/sb800: Fix PCI-to-PCI bridge 0:14.4 configuration
by Kyösti Mälkki 02 Feb '15

02 Feb '15

Kyösti Mälkki (kyosti.malkki(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/8329 -gerrit commit b9e4df81031c73b7c7e6b72312a66802e463a896 Author: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Date: Tue Jan 27 12:18:17 2015 +0200 AMD cimx/sb800: Fix PCI-to-PCI bridge 0:14.4 configuration A set of pins can be configured for GPIO or (parallel) PCI bridge use. When requested configuration is 0:14.4 enabled, register programming must be done before attempting to enumerate devices behind the bridge. When requested configuration is 0:14.4 disabled, we must not even temporarily enable pins for PCI use to avoid spurious GPIO state changes. Fix devicetree entry for asrock/e350m1 and gizmosphere/gizmo, these boards do not implement slots or integrated PCI devices. Drop related dead code. Change-Id: I8644ebae43b33121ef2a7ed30f745299716ce0df Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> --- src/mainboard/advansus/a785e-i/mainboard.c | 4 -- src/mainboard/asrock/e350m1/devicetree.cb | 2 +- src/mainboard/asus/m5a88-v/mainboard.c | 4 -- src/mainboard/avalue/eax-785e/mainboard.c | 4 -- src/mainboard/gizmosphere/gizmo/devicetree.cb | 2 +- src/southbridge/amd/cimx/sb800/late.c | 54 +++++---------------------- 6 files changed, 11 insertions(+), 59 deletions(-) diff --git a/src/mainboard/advansus/a785e-i/mainboard.c b/src/mainboard/advansus/a785e-i/mainboard.c index 9b6450d..90d3342 100644 --- a/src/mainboard/advansus/a785e-i/mainboard.c +++ b/src/mainboard/advansus/a785e-i/mainboard.c @@ -37,10 +37,6 @@ void enable_int_gfx(void) { volatile u8 *gpio_reg; -#ifdef UNUSED_CODE - RWPMIO(SB_PMIOA_REGEA, AccWidthUint8, ~(BIT0), BIT0); /* Disable the PCIB */ - RWPMIO(SB_PMIOA_REGF6, AccWidthUint8, ~(BIT0), BIT0); /* Disable Gec */ -#endif /* make sure the Acpi MMIO(fed80000) is accessible */ RWPMIO(SB_PMIOA_REG24, AccWidthUint8, ~(BIT0), BIT0); diff --git a/src/mainboard/asrock/e350m1/devicetree.cb b/src/mainboard/asrock/e350m1/devicetree.cb index 0690664..7f44869 100644 --- a/src/mainboard/asrock/e350m1/devicetree.cb +++ b/src/mainboard/asrock/e350m1/devicetree.cb @@ -94,7 +94,7 @@ chip northbridge/amd/agesa/family14/root_complex device pnp 2e.f off end # GPIO_PP_OD end end #LPC - device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} + device pci 14.4 off end # PCIB 0x4384 device pci 14.5 on end # USB 2 device pci 15.0 on end # PCIe PortA device pci 15.1 on end # PCIe PortB: NIC diff --git a/src/mainboard/asus/m5a88-v/mainboard.c b/src/mainboard/asus/m5a88-v/mainboard.c index 8ee338e..9be0ce9 100644 --- a/src/mainboard/asus/m5a88-v/mainboard.c +++ b/src/mainboard/asus/m5a88-v/mainboard.c @@ -37,10 +37,6 @@ void enable_int_gfx(void) { volatile u8 *gpio_reg; -#ifdef UNUSED_CODE - RWPMIO(SB_PMIOA_REGEA, AccWidthUint8, ~(BIT0), BIT0); /* Disable the PCIB */ - RWPMIO(SB_PMIOA_REGF6, AccWidthuint8, ~(BIT0), BIT0); /* Disable Gec */ -#endif /* make sure the MMIO(fed80000) is accessible */ RWPMIO(SB_PMIOA_REG24, AccWidthUint8, ~(BIT0), BIT0); diff --git a/src/mainboard/avalue/eax-785e/mainboard.c b/src/mainboard/avalue/eax-785e/mainboard.c index 6ce3469..0f5f744 100644 --- a/src/mainboard/avalue/eax-785e/mainboard.c +++ b/src/mainboard/avalue/eax-785e/mainboard.c @@ -37,10 +37,6 @@ void enable_int_gfx(void) { volatile u8 *gpio_reg; -#ifdef UNUSED_CODE - RWPMIO(SB_PMIOA_REGEA, AccWidthUint8, ~(BIT0), BIT0); /* Disable the PCIB */ - RWPMIO(SB_PMIOA_REGF6, AccWidthUint8, ~(BIT0), BIT0); /* Disable Gec */ -#endif /* make sure the Acpi MMIO(fed80000) is accessible */ RWPMIO(SB_PMIOA_REG24, AccWidthUint8, ~(BIT0), BIT0); diff --git a/src/mainboard/gizmosphere/gizmo/devicetree.cb b/src/mainboard/gizmosphere/gizmo/devicetree.cb index 8cd4cd3..baa10b3 100644 --- a/src/mainboard/gizmosphere/gizmo/devicetree.cb +++ b/src/mainboard/gizmosphere/gizmo/devicetree.cb @@ -48,7 +48,7 @@ chip northbridge/amd/agesa/family14/root_complex device pci 14.1 on end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 device pci 14.3 on end # LPC 0x439d - device pci 14.4 on end # PCIB 0x4384, NOTE: this device must always be enabled or removed + device pci 14.4 off end # PCIB 0x4384 device pci 14.5 off end # USB 2 device pci 15.0 on end # PCIe PortA # PCIe x1 to high speed edge connector device pci 15.1 on end # PCIe PortB # PCIe x1 to high speed edge connector diff --git a/src/southbridge/amd/cimx/sb800/late.c b/src/southbridge/amd/cimx/sb800/late.c index 1eb865e..0c7f4d1 100644 --- a/src/southbridge/amd/cimx/sb800/late.c +++ b/src/southbridge/amd/cimx/sb800/late.c @@ -260,51 +260,6 @@ static const struct pci_driver gec_driver __pci_driver = { }; /** - * @brief Enable PCI Bridge - * - * PcibConfig [PM_Reg: EAh], PCIDisable [Bit0] - * 'PCIDisable' set to 0 to enable P2P bridge. - * 'PCIDisable' set to 1 to disable P2P bridge and enable PCI interface pins - * to function as GPIO {GPIO 35:0}. - */ -static void pci_init(device_t dev) -{ - /* PCI Bridge SHOULD be enabled by default according to SB800 rrg, - * but actually was disabled in some platform, so I have to enabled it. - */ - RWMEM(ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEA, AccWidthUint8, ~BIT0, 0); -} - - -static struct device_operations pci_ops = { - .read_resources = pci_bus_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_bus_enable_resources, - .init = pci_init, - .scan_bus = pci_scan_bridge, - .reset_bus = pci_bus_reset, - .ops_pci = &lops_pci, -}; - -static const struct pci_driver pci_driver __pci_driver = { - .ops = &pci_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB800_PCI, -}; - - -struct device_operations bridge_ops = { - .read_resources = pci_bus_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_bus_enable_resources, - .init = 0, - .scan_bus = pci_scan_bridge, - .enable = 0, - .reset_bus = pci_bus_reset, - .ops_pci = &lops_pci, -}; - -/** * South Bridge CIMx ramstage entry point wrapper. */ void sb_Before_Pci_Init(void) @@ -452,6 +407,15 @@ static void sb800_enable(device_t dev) break; case (0x14 << 3) | 4: /* 0:14:4 PCI */ + /* PcibConfig [PM_Reg: EAh], PCIDisable [Bit0] + * 'PCIDisable' set to 0 to enable P2P bridge. + * 'PCIDisable' set to 1 to disable P2P bridge and enable PCI interface pins + * to function as GPIO {GPIO 35:0}. + */ + if (dev->enabled) + RWMEM(ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEA, AccWidthUint8, ~BIT0, 0); + else + RWMEM(ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEA, AccWidthUint8, ~BIT0, BIT0); break; case (0x14 << 3) | 6: /* 0:14:6 GEC */

1 0

New patch to review for coreboot: 2464d14 pcengines/apu1: Fix and cleanup devicetree
by Kyösti Mälkki 02 Feb '15

02 Feb '15

Kyösti Mälkki (kyosti.malkki(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/8328 -gerrit commit 2464d14624b67701b90c874bd5479900bc1765df Author: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Date: Sat Jan 17 18:08:40 2015 +0200 pcengines/apu1: Fix and cleanup devicetree Change gpp_configuration to GPP_CFGMODE_X1111 (was X4000), this is done to only advertise x1 lanes for PCIe link 0:15.0. Remove functions 0:12.1 and 0:13.1 that do not exist in the hardware. Disable 0:14.1 IDE controller, as it would only be used with SATA ports 4 and 5 that are not populated with connectors in the hardware. Disable 0:14.2 HD audio, as it is not implemented in the hardware Disable 0:14.4 PCI-to-PCI bridge, as no PCI slots are implemented and some pins are used for GPIO in the hardware. Remove related IRQ entries for the bus that does not exist from MP tables. Disable 0:14.5 OHCI controller, as ports behind this USB1.1 -only controller are not populated in the hardware. Fix some alignment and whitespace. To my knowledge these changes are not included with SAGE release pcengines.apu_139_osp.tar.gz, but that tarball does not contain either devicetree.cb or a pre-compiled static.c file so I cannot tell for sure. Change-Id: Idcb8e76645fce7e89a37ff7007531b668f472131 Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> --- src/mainboard/pcengines/apu1/devicetree.cb | 67 ++++++++++++++---------------- src/mainboard/pcengines/apu1/mptable.c | 11 ----- 2 files changed, 32 insertions(+), 46 deletions(-) diff --git a/src/mainboard/pcengines/apu1/devicetree.cb b/src/mainboard/pcengines/apu1/devicetree.cb index 5f6f9c9..3c0b795 100644 --- a/src/mainboard/pcengines/apu1/devicetree.cb +++ b/src/mainboard/pcengines/apu1/devicetree.cb @@ -26,29 +26,26 @@ chip northbridge/amd/agesa/family14/root_complex device domain 0 on subsystemid 0x1022 0x1510 inherit chip northbridge/amd/agesa/family14 # CPU side of HT root complex -# device pci 18.0 on # northbridge - chip northbridge/amd/agesa/family14 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 1.0 off end # Internal Graphics P2P bridge 0x980[2456] - device pci 4.0 on end # PCIE P2P bridge on-board NIC - device pci 5.0 on end # PCIE P2P bridge - device pci 6.0 on end # PCIE P2P bridge PCIe slot - device pci 7.0 on end # PCIE P2P bridge - device pci 8.0 on end # NB/SB Link P2P bridge - end # agesa northbridge +# device pci 18.0 on # northbridge + chip northbridge/amd/agesa/family14 # PCI side of HT root complex + device pci 0.0 on end # Root Complex + device pci 1.0 off end # Internal Graphics P2P bridge 0x980[2456] + device pci 4.0 on end # PCIE P2P bridge on-board NIC + device pci 5.0 on end # PCIE P2P bridge + device pci 6.0 on end # PCIE P2P bridge PCIe slot + device pci 7.0 on end # PCIE P2P bridge + device pci 8.0 on end # NB/SB Link P2P bridge + end # agesa northbridge - chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # OHCI USB 0-4 - device pci 12.1 on end # OHCI USB 0-4 - device pci 12.2 on end # EHCI USB 0-4 - device pci 13.0 on end # OHCI USB 5-9 - device pci 13.1 on end # OHCI USB 5-9 - device pci 13.2 on end # EHCI USB 5-9 - device pci 14.0 on # SM - end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 + chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus + device pci 11.0 on end # SATA + device pci 12.0 on end # OHCI USB 0-4 + device pci 12.2 on end # EHCI USB 0-4 + device pci 13.0 on end # OHCI USB 5-9 + device pci 13.2 on end # EHCI USB 5-9 + device pci 14.0 on end # SMbus + device pci 14.1 off end # IDE 0x439c + device pci 14.2 off end # HDA 0x4383 device pci 14.3 on # LPC 0x439d chip superio/nuvoton/nct5104d register "irq_trigger_type" = "0" @@ -76,19 +73,19 @@ chip northbridge/amd/agesa/family14/root_complex device pnp 2e.607 off end device pnp 2e.e off end end - end #LPC - device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} - device pci 14.5 on end # OHCI FS/LS USB - #device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) - device pci 15.0 on end # PCIe PortA - device pci 15.1 off end # PCIe PortB - device pci 15.2 off end # PCIe PortC - device pci 15.3 off end # PCIe PortD - device pci 16.0 on end # OHCI USB 10-13 - device pci 16.2 on end # EHCI USB 10-13 - register "gpp_configuration" = "0" - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/cimx/sb800 + end #LPC + device pci 14.4 off end # PCIB 0x4384 + device pci 14.5 off end # OHCI FS/LS USB + #device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) + device pci 15.0 on end # PCIe PortA + device pci 15.1 off end # PCIe PortB + device pci 15.2 off end # PCIe PortC + device pci 15.3 off end # PCIe PortD + device pci 16.0 on end # OHCI USB 10-13 + device pci 16.2 on end # EHCI USB 10-13 + register "gpp_configuration" = "4" # GPP_CFGMODE_X1111 + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + end #southbridge/amd/cimx/sb800 # end # device pci 18.0 # These seem unnecessary device pci 18.0 on end diff --git a/src/mainboard/pcengines/apu1/mptable.c b/src/mainboard/pcengines/apu1/mptable.c index 4686d62..c0553b4 100644 --- a/src/mainboard/pcengines/apu1/mptable.c +++ b/src/mainboard/pcengines/apu1/mptable.c @@ -114,17 +114,6 @@ static void *smp_write_config_table(void *v) PCI_INT(0x3, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */ PCI_INT(0x4, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */ - /* PCI slots */ - device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); - if (dev && dev->enabled) { - u8 bus_pci = dev->link_list->secondary; - /* PCI_SLOT 0 */ - PCI_INT(bus_pci, 0x5, 0x0, intr_data_ptr[PIRQ_E]); /* INTA -> INTE */ - PCI_INT(bus_pci, 0x5, 0x1, intr_data_ptr[PIRQ_F]); /* INTB -> INTF */ - PCI_INT(bus_pci, 0x5, 0x2, intr_data_ptr[PIRQ_G]); /* INTC -> INTG */ - PCI_INT(bus_pci, 0x5, 0x3, intr_data_ptr[PIRQ_H]); /* INTD -> INTH */ - } - /* PCIe PortA */ PCI_INT(0x0, 0x15, 0x0, intr_data_ptr[PIRQ_E]); /* INTA -> INTE */ /* PCIe PortB */

1 0

New patch to review for coreboot: 6660dc1 pcengines/apu1: Fix PCI device 16 interrupts
by Kyösti Mälkki 02 Feb '15

02 Feb '15

Kyösti Mälkki (kyosti.malkki(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/8327 -gerrit commit 6660dc121b2508b45775cbf0260d671f671b7284 Author: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Date: Wed Jan 14 12:58:53 2015 +0200 pcengines/apu1: Fix PCI device 16 interrupts Interrupts from USB controllers 0:16.0 and 0:16.2 were not routed in PIC mode. The only affected peripheral was the SD card reader. This patch is not included with SAGE release pcengines.apu_139_osp.tar.gz. Change-Id: Ie7f0fa3751b46cca0132bd6dcada3628c6a45efb Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> --- src/mainboard/pcengines/apu1/mainboard.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/mainboard/pcengines/apu1/mainboard.c b/src/mainboard/pcengines/apu1/mainboard.c index 01a0bd2..1ba0e23 100644 --- a/src/mainboard/pcengines/apu1/mainboard.c +++ b/src/mainboard/pcengines/apu1/mainboard.c @@ -63,7 +63,7 @@ static const u8 mainboard_picr_data[FCH_INT_TABLE_SIZE] = { /* IMC INT0 - 5 */ [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, /* USB Devs 18/19/20/22 INTA-C */ - [0x30] = 0x0A,0x0B,0x0A,0x0B,0x1F,0x1F,0x0A, + [0x30] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A, /* IDE, SATA */ [0x40] = 0x0B,0x0B, /* GPPInt0 - 3 */

1 0

New patch to review for coreboot: 7e7e110 pcengines/apu1: Implement board GPIOs
by Kyösti Mälkki 02 Feb '15

02 Feb '15

Kyösti Mälkki (kyosti.malkki(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/8326 -gerrit commit 7e7e110043c78f9f0393c75263d143bcd62b7aea Author: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Date: Tue Nov 11 17:22:23 2014 +0200 pcengines/apu1: Implement board GPIOs Change-Id: Ibc5d950662d633a07d62fd5a5984a56d8e5f959d Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> --- src/mainboard/pcengines/apu1/BiosCallOuts.c | 3 +- src/mainboard/pcengines/apu1/Makefile.inc | 2 + src/mainboard/pcengines/apu1/gpio_ftns.c | 68 +++++++++++++++++++++++++++++ src/mainboard/pcengines/apu1/gpio_ftns.h | 47 ++++++++++++++++++++ src/mainboard/pcengines/apu1/mainboard.c | 19 ++++++++ src/mainboard/pcengines/apu1/romstage.c | 41 +++++++++++++++++ 6 files changed, 179 insertions(+), 1 deletion(-) diff --git a/src/mainboard/pcengines/apu1/BiosCallOuts.c b/src/mainboard/pcengines/apu1/BiosCallOuts.c index d97fe22..0bd74fe 100644 --- a/src/mainboard/pcengines/apu1/BiosCallOuts.c +++ b/src/mainboard/pcengines/apu1/BiosCallOuts.c @@ -24,6 +24,7 @@ #include "heapManager.h" #include "SB800.h" #include <stdlib.h> +#include "gpio_ftns.h" static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr); static AGESA_STATUS board_ReadSpd_from_cbfs(UINT32 Func, UINT32 Data, VOID *ConfigPtr); @@ -59,7 +60,7 @@ static AGESA_STATUS board_ReadSpd_from_cbfs(UINT32 Func, UINT32 Data, VOID *Conf AGESA_STATUS Status = AGESA_UNSUPPORTED; #ifdef __PRE_RAM__ AGESA_READ_SPD_PARAMS *info = ConfigPtr; - u8 index = 0; + u8 index = get_spd_offset(); if (info->MemChannelId > 0) return AGESA_UNSUPPORTED; diff --git a/src/mainboard/pcengines/apu1/Makefile.inc b/src/mainboard/pcengines/apu1/Makefile.inc index 7fbed57..b19ca88 100644 --- a/src/mainboard/pcengines/apu1/Makefile.inc +++ b/src/mainboard/pcengines/apu1/Makefile.inc @@ -29,10 +29,12 @@ endif romstage-y += buildOpts.c romstage-y += BiosCallOuts.c romstage-y += PlatformGnbPcie.c +romstage-y += gpio_ftns.c ramstage-y += buildOpts.c ramstage-y += BiosCallOuts.c ramstage-y += PlatformGnbPcie.c +ramstage-y += gpio_ftns.c ## DIMM SPD for on-board memory SPD_BIN = $(obj)/spd.bin diff --git a/src/mainboard/pcengines/apu1/gpio_ftns.c b/src/mainboard/pcengines/apu1/gpio_ftns.c new file mode 100644 index 0000000..b683543 --- /dev/null +++ b/src/mainboard/pcengines/apu1/gpio_ftns.c @@ -0,0 +1,68 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <arch/io.h> +#include "SBPLATFORM.h" +#include <southbridge/amd/cimx/cimx_util.h> +#include "gpio_ftns.h" + +u32 find_gpio_base(void) +{ + u8 pm_index, pm_data; + u32 base_addr = 0; + + /* Find the ACPImmioAddr base address */ + for ( pm_index = 0x27; pm_index > 0x23; pm_index-- ) { + outb( pm_index, PM_INDEX ); + pm_data = inb( PM_DATA ); + base_addr <<= 8; + base_addr |= (u32)pm_data; + } + base_addr &= 0xFFFFF000; + return (base_addr); +} + +void configure_gpio(u32 base_addr, u32 gpio, u8 iomux_ftn, u8 setting) +{ + u8 bdata; + u8 *memptr; + + memptr = (u8 *)(base_addr + IOMUX_OFFSET + gpio); + *memptr = iomux_ftn; + + memptr = (u8 *)(base_addr + GPIO_OFFSET + gpio); + bdata = *memptr; + bdata &= 0x07; + bdata |= setting; /* set direction and data value */ + *memptr = bdata; +} + +u8 read_gpio(u32 base_addr, u32 gpio) +{ + u8 *memptr = (u8 *)(base_addr + GPIO_OFFSET + gpio); + return (*memptr & GPIO_DATA_IN) ? 1 : 0; +} + +int get_spd_offset(void) +{ + u32 base_addr = find_gpio_base(); + u8 spd_offset = read_gpio(base_addr, GPIO_16); + return spd_offset; +} diff --git a/src/mainboard/pcengines/apu1/gpio_ftns.h b/src/mainboard/pcengines/apu1/gpio_ftns.h new file mode 100644 index 0000000..11d5ea1 --- /dev/null +++ b/src/mainboard/pcengines/apu1/gpio_ftns.h @@ -0,0 +1,47 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef GPIO_FTNS_H +#define GPIO_FTNS_H + +u32 find_gpio_base(void); +void configure_gpio(u32 base_addr, u32 gpio, u8 iomux_ftn, u8 setting); +u8 read_gpio(u32 base_addr, u32 gpio); +int get_spd_offset(void); + +#define IOMUX_OFFSET 0xD00 +#define GPIO_OFFSET 0x100 +#define GPIO_10 10 // PE3 Reset +#define GPIO_11 11 // PE4 Reset +#define GPIO_15 15 // board rev strap ms bit +#define GPIO_16 16 // board rev strap ls bit +#define GPIO_17 17 // TP13 +#define GPIO_18 18 // TP10 +#define GPIO_187 187 // MODESW +#define GPIO_189 189 // LED1# +#define GPIO_190 190 // LED2# +#define GPIO_191 191 // LED3# +#define GPIO_FTN_1 0x01 +#define GPIO_OUTPUT 0x08 +#define GPIO_INPUT 0x28 +#define GPIO_DATA_IN 0x80 +#define GPIO_DATA_LOW 0x00 +#define GPIO_DATA_HIGH 0x40 + +#endif /* GPIO_FTNS_H */ diff --git a/src/mainboard/pcengines/apu1/mainboard.c b/src/mainboard/pcengines/apu1/mainboard.c index cf0d823..01a0bd2 100644 --- a/src/mainboard/pcengines/apu1/mainboard.c +++ b/src/mainboard/pcengines/apu1/mainboard.c @@ -33,6 +33,7 @@ #include "SBPLATFORM.h" #include <southbridge/amd/cimx/sb800/pci_devs.h> #include <northbridge/amd/agesa/family14/pci_devs.h> +#include "gpio_ftns.h" void set_pcie_reset(void); void set_pcie_dereset(void); @@ -161,6 +162,24 @@ static void mainboard_enable(device_t dev) pirq_setup(); } +static void mainboard_final(void *chip_info) +{ + u32 mmio_base; + + printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Final.\n"); + + /* + * LED1/D7/GPIO_189 should be 0 + * LED2/D6/GPIO_190 should be 1 + * LED3/D5/GPIO_191 should be 1 + */ + mmio_base = find_gpio_base(); + configure_gpio(mmio_base, GPIO_189, GPIO_FTN_1, GPIO_OUTPUT | GPIO_DATA_LOW); + configure_gpio(mmio_base, GPIO_190, GPIO_FTN_1, GPIO_OUTPUT | GPIO_DATA_HIGH); + configure_gpio(mmio_base, GPIO_191, GPIO_FTN_1, GPIO_OUTPUT | GPIO_DATA_HIGH); +} + struct chip_operations mainboard_ops = { .enable_dev = mainboard_enable, + .final = mainboard_final, }; diff --git a/src/mainboard/pcengines/apu1/romstage.c b/src/mainboard/pcengines/apu1/romstage.c index c555536..e9b9400 100644 --- a/src/mainboard/pcengines/apu1/romstage.c +++ b/src/mainboard/pcengines/apu1/romstage.c @@ -2,6 +2,8 @@ * This file is part of the coreboot project. * * Copyright (C) 2011 Advanced Micro Devices, Inc. + * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC + * Copyright (C) 2014 Kyösti Mälkki <kyosti.malkki(a)gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -32,6 +34,7 @@ #include <cpu/x86/mtrr.h> #include <cpu/amd/car.h> #include <northbridge/amd/agesa/agesawrapper.h> +#include <southbridge/amd/cimx/cimx_util.h> #include <cpu/x86/bist.h> #include <cpu/x86/cache.h> #include <sb_cimx.h> @@ -41,10 +44,13 @@ #include <cpu/amd/agesa/s3_resume.h> #include <superio/nuvoton/common/nuvoton.h> #include <superio/nuvoton/nct5104d/nct5104d.h> +#include "gpio_ftns.h" #define SIO_PORT 0x2e #define SERIAL_DEV PNP_DEV(SIO_PORT, NCT5104D_SP1) +static void early_lpc_init(void); + void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { u32 val; @@ -64,6 +70,8 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) if (!cpu_init_detectedx && boot_cpu()) { post_code(0x30); sb_Poweron_Init(); + early_lpc_init(); + post_code(0x31); nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); @@ -112,3 +120,36 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) post_code(0x54); /* Should never see this post code. */ } + +static void early_lpc_init(void) +{ + u32 mmio_base; + + /* PC Engines requires system boot when power is applied. This feature is + * controlled in PM_REG 5Bh register. "Always Power On" works by writing a + * value of 05h. + */ + u8 bdata = pm_ioread(SB_PMIOA_REG5B); + bdata &= 0xf8; //clear bits 0-2 + bdata |= 0x05; //set bits 0,2 + pm_iowrite(SB_PMIOA_REG5B, bdata); + + /* Multi-function pins switch to GPIO0-35, these pins are shared with PCI pins */ + bdata = pm_ioread(SB_PMIOA_REGEA); + bdata &= 0xfe; //clear bit 0 + bdata |= 0x01; //set bit 0 + pm_iowrite(SB_PMIOA_REGEA, bdata); + + //configure required GPIOs + mmio_base = find_gpio_base(); + configure_gpio(mmio_base, GPIO_10, GPIO_FTN_1, GPIO_OUTPUT | GPIO_DATA_HIGH); + configure_gpio(mmio_base, GPIO_11, GPIO_FTN_1, GPIO_OUTPUT | GPIO_DATA_HIGH); + configure_gpio(mmio_base, GPIO_15, GPIO_FTN_1, GPIO_INPUT); + configure_gpio(mmio_base, GPIO_16, GPIO_FTN_1, GPIO_INPUT); + configure_gpio(mmio_base, GPIO_17, GPIO_FTN_1, GPIO_INPUT); + configure_gpio(mmio_base, GPIO_18, GPIO_FTN_1, GPIO_INPUT); + configure_gpio(mmio_base, GPIO_187, GPIO_FTN_1, GPIO_INPUT); + configure_gpio(mmio_base, GPIO_189, GPIO_FTN_1, GPIO_OUTPUT | GPIO_DATA_LOW); + configure_gpio(mmio_base, GPIO_190, GPIO_FTN_1, GPIO_OUTPUT | GPIO_DATA_LOW); + configure_gpio(mmio_base, GPIO_191, GPIO_FTN_1, GPIO_OUTPUT | GPIO_DATA_LOW); +}

1 0

New patch to review for coreboot: 3c5c4cc pcengines/apu1: New board PC Engines APU1
by Kyösti Mälkki 02 Feb '15

02 Feb '15

Kyösti Mälkki (kyosti.malkki(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/8325 -gerrit commit 3c5c4cc2f60994f4c0f4d4b98bbf5e26cd1acadf Author: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Date: Fri Nov 14 16:20:22 2014 +0200 pcengines/apu1: New board PC Engines APU1 While we cannot recreate exact copies of PC Engines APU1 firmware images, I shall upstream the vital changes for coreboot from the following tarballs SAGE has published to meet GPL: SageBios_PCEngines_APU_sources_for_publishing_20140405_GPL_package.tar.gz md5sum: ce5f54723e4fe3b63a1a3e35586728d4 pcengines.apu_139_osp.tar.gz md5sum: af6c8ab3b85d1a5a9fbeb41efa30a1ef The patch here adds Kconfig, Makefile.inc and devicetree.cb files to match 2014/04/05 release tarball config.h and static.c files. Change-Id: Id61270b4d484f712a5c0e780a01fc81f1550b9ad Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> --- src/mainboard/pcengines/Kconfig | 3 + src/mainboard/pcengines/apu1/BiosCallOuts.c | 27 ++- .../pcengines/apu1/HYNIX-H5TQ2G83CFR.spd.hex | 251 ++++++++++++++++++++ .../pcengines/apu1/HYNIX-H5TQ4G83MFR.spd.hex | 253 +++++++++++++++++++++ src/mainboard/pcengines/apu1/Kconfig | 16 +- src/mainboard/pcengines/apu1/Makefile.inc | 22 ++ src/mainboard/pcengines/apu1/PlatformGnbPcie.c | 22 +- .../pcengines/apu1/PlatformGnbPcieComplex.h | 3 +- src/mainboard/pcengines/apu1/acpi/routing.asl | 2 +- src/mainboard/pcengines/apu1/board_info.txt | 4 +- src/mainboard/pcengines/apu1/buildOpts.c | 17 +- src/mainboard/pcengines/apu1/devicetree.cb | 62 +++-- src/mainboard/pcengines/apu1/dsdt.asl | 3 +- src/mainboard/pcengines/apu1/mainboard.c | 18 +- src/mainboard/pcengines/apu1/mptable.c | 2 + src/mainboard/pcengines/apu1/platform_cfg.h | 10 +- src/mainboard/pcengines/apu1/romstage.c | 5 + 17 files changed, 655 insertions(+), 65 deletions(-) diff --git a/src/mainboard/pcengines/Kconfig b/src/mainboard/pcengines/Kconfig index 9fb477b..a20561b 100644 --- a/src/mainboard/pcengines/Kconfig +++ b/src/mainboard/pcengines/Kconfig @@ -11,6 +11,8 @@ config BOARD_PCENGINES_ALIX2D bool "ALIX.2D2 or 2D3" config BOARD_PCENGINES_ALIX6 bool "ALIX.6" +config BOARD_PCENGINES_APU1 + bool "APU1" endchoice @@ -18,6 +20,7 @@ source "src/mainboard/pcengines/alix1c/Kconfig" source "src/mainboard/pcengines/alix2c/Kconfig" source "src/mainboard/pcengines/alix2d/Kconfig" source "src/mainboard/pcengines/alix6/Kconfig" +source "src/mainboard/pcengines/apu1/Kconfig" config MAINBOARD_VENDOR string diff --git a/src/mainboard/pcengines/apu1/BiosCallOuts.c b/src/mainboard/pcengines/apu1/BiosCallOuts.c index 74b9f67..d97fe22 100644 --- a/src/mainboard/pcengines/apu1/BiosCallOuts.c +++ b/src/mainboard/pcengines/apu1/BiosCallOuts.c @@ -19,12 +19,14 @@ #include "AGESA.h" #include "amdlib.h" +#include <spd_cache.h> #include <northbridge/amd/agesa/BiosCallOuts.h> #include "heapManager.h" #include "SB800.h" #include <stdlib.h> static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr); +static AGESA_STATUS board_ReadSpd_from_cbfs(UINT32 Func, UINT32 Data, VOID *ConfigPtr); const BIOS_CALLOUT_STRUCT BiosCallouts[] = { @@ -32,7 +34,7 @@ const BIOS_CALLOUT_STRUCT BiosCallouts[] = {AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer }, {AGESA_LOCATE_BUFFER, agesa_LocateBuffer }, {AGESA_DO_RESET, agesa_Reset }, - {AGESA_READ_SPD, agesa_ReadSpd }, + {AGESA_READ_SPD, board_ReadSpd_from_cbfs }, {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, {AGESA_GNB_PCIE_SLOT_RESET, agesa_NoopSuccess }, @@ -51,3 +53,26 @@ static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *Config ((MEM_DATA_STRUCT*)ConfigPtr)->ParameterListPtr->DDR3Voltage = VOLT1_5; return AGESA_SUCCESS; } + +static AGESA_STATUS board_ReadSpd_from_cbfs(UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + AGESA_STATUS Status = AGESA_UNSUPPORTED; +#ifdef __PRE_RAM__ + AGESA_READ_SPD_PARAMS *info = ConfigPtr; + u8 index = 0; + + if (info->MemChannelId > 0) + return AGESA_UNSUPPORTED; + if (info->SocketId != 0) + return AGESA_UNSUPPORTED; + if (info->DimmId != 0) + return AGESA_UNSUPPORTED; + + /* Read index 0, first SPD_SIZE bytes of spd.bin file. */ + if (read_spd_from_cbfs((u8*)info->Buffer, index) < 0) + die("No SPD data\n"); + + Status = AGESA_SUCCESS; +#endif + return Status; +} diff --git a/src/mainboard/pcengines/apu1/HYNIX-H5TQ2G83CFR.spd.hex b/src/mainboard/pcengines/apu1/HYNIX-H5TQ2G83CFR.spd.hex new file mode 100644 index 0000000..c920e17 --- /dev/null +++ b/src/mainboard/pcengines/apu1/HYNIX-H5TQ2G83CFR.spd.hex @@ -0,0 +1,251 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2014 Sage Electronic Engineering, LLC. +# Copyright (C) 2014 Kyösti Mälkki <kyosti.malkki(a)gmail.com> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +# HYNIX-H5TQ2G83CFR + +# SPD contents for APU 2GB DDR3 (1333MHz PC1333) soldered down +# 0 Number of SPD Bytes used / Total SPD Size / CRC Coverage +# bits[3:0]: 1 = 128 SPD Bytes Used +# bits[6:4]: 1 = 256 SPD Bytes Total +# bit7 : 0 = CRC covers bytes 0 ~ 125 +11 + +# 1 SPD Revision - +# 0x10 = Revision 1.0 +10 +# 2 Key Byte / DRAM Device Type +# bits[7:0]: 0x0b = DDR3 SDRAM +0B + +# 3 Key Byte / Module Type +# bits[3:0]: 3 = SO-DIMM +# bits[7:4]: reserved +03 + +# 4 SDRAM CHIP Density and Banks +# bits[3:0]: 3 = 2 Gigabits Total SDRAM capacity per chip +# bits[6:4]: 0 = 3 (8 banks) +# bit7 : reserved +03 + +# 5 SDRAM Addressing +# bits[2:0]: 1 = 10 Column Address Bits +# bits[5:3]: 3 = 15 Row Address Bits +# bits[7:6]: reserved +19 + +# 6 Module Nominal Voltage, VDD +# bit0 : 0 = 1.5 V operable +# bit1 : 0 = NOT 1.35 V operable +# bit2 : 0 = NOT 1.25 V operable +# bits[7:3]: reserved +00 + +# 7 Module Organization +# bits[2:0]: 1 = 8 bits +# bits[5:3]: 0 = 1 Rank +# bits[7:6]: reserved +01 + +# 8 Module Memory Bus Width +# bits[2:0]: 3 = Primary bus width is 64 bits +# bits[4:3]: 0 = 0 bits (no bus width extension) +# bits[7:5]: reserved +03 + +# 9 Fine Timebase (FTB) Dividend / Divisor +# bits[3:0]: 0x01 divisor +# bits[7:4]: 0x01 dividend +# 1 / 1 = 1.0 ps +11 + +# 10 Medium Timebase (MTB) Dividend +# 11 Medium Timebase (MTB) Divisor +# 1 / 8 = .125 ns +01 08 + +# 12 SDRAM Minimum Cycle Time (tCKmin) +# 0x0c = tCKmin of 1.5 ns = in multiples of MTB +0C + +# 13 Reserved +00 + +# 14 CAS Latencies Supported, Least Significant Byte +# 15 CAS Latencies Supported, Most Significant Byte +# Cas Latencies of 11 - 5 are supported +7E 00 + +# 16 Minimum CAS Latency Time (tAAmin) +# 0x6C = 13.5ns - DDR3-1333 +6C + +# 17 Minimum Write Recovery Time (tWRmin) +# 0x78 = tWR of 15ns - All DDR3 speed grades +78 + +# 18 Minimum RAS# to CAS# Delay Time (tRCDmin) +# 0x6E = 13.5ns - DDR3-1333 +6C + +# 19 Minimum Row Active to Row Active Delay Time (tRRDmin) +# 0x30 = 6ns +30 + +# 20 Minimum Row Precharge Delay Time (tRPmin) +# 0x6C = 13.5ns - DDR3-1333 +6C + +# 21 Upper Nibbles for tRAS and tRC +# bits[3:0]: tRAS most significant nibble = 1 (see byte 22) +# bits[7:4]: tRC most significant nibble = 1 (see byte 23) +11 + +# 22 Minimum Active to Precharge Delay Time (tRASmin), LSB +# 0x120 = 36ns - DDR3-1333 (see byte 21) +20 + +# 23 Minimum Active to Active/Refresh Delay Time (tRCmin), LSB +# 0x28C = 49.5ns - DDR3-1333 +8C + +# 24 Minimum Refresh Recovery Delay Time (tRFCmin), LSB +# 25 Minimum Refresh Recovery Delay Time (tRFCmin), MSB +# 0x500 = 160ns - for 2 Gigabit chips +00 05 + +# 26 Minimum Internal Write to Read Command Delay Time (tWTRmin) +# 0x3c = 7.5 ns - All DDR3 SDRAM speed bins +3C + +# 27 Minimum Internal Read to Precharge Command Delay Time (tRTPmin) +# 0x3c = 7.5ns - All DDR3 SDRAM speed bins +3C + +# 28 Upper Nibble for tFAWmin +# 29 Minimum Four Activate Window Delay Time (tFAWmin) +# 0x00F0 = 30ns - DDR3-1333, 1 KB page size +00 F0 + +# 30 SDRAM Optional Feature +# bit0 : 1= RZQ/6 supported +# bit1 : 1 = RZQ/7 supported +# bits[6:2]: reserved +# bit7 : 1 = DLL Off mode supported +83 + +# 31 SDRAM Thermal and Refresh Options +# bit0 : 1 = Temp up to 95c supported +# bit1 : 0 = 85-95c uses 2x refresh rate +# bit2 : 1 = Auto Self Refresh supported +# bit3 : 0 = no on die thermal sensor +# bits[6:4]: reserved +# bit7 : 0 = partial self refresh supported +05 + +# 32 Module Thermal Sensor +# 0 = Thermal sensor not incorporated onto this assembly +00 + +# 33 SDRAM Device Type +# bits[1:0]: 2 = Signal Loading +# bits[3:2]: reserved +# bits[6:4]: 4 = Die count +# bit7 : 0 = Standard Monolithic DRAM Device +42 + +# 34 Fine Offset for SDRAM Minimum Cycle Time (tCKmin) +# 35 Fine Offset for Minimum CAS Latency Time (tAAmin) +# 36 Fine Offset for Minimum RAS# to CAS# Delay Time (tRCDmin) +# 37 Fine Offset for Minimum Row Precharge Delay Time (tRPmin) +# 38 Fine Offset for Minimum Active to Active/Refresh Delay (tRCmin) +00 00 00 00 00 + +# 39 (reserved) +00 + +# 40 - 47 (reserved) +00 00 00 00 00 00 00 00 + +# 48 - 55 (reserved) +00 00 00 00 00 00 00 00 + +# 56 - 59 (reserved) +00 00 00 00 + +# 60 Raw Card Extension, Module Nominal Height +# bits[4:0]: 0 = <= 15mm tall +# bits[7:5]: 0 = raw card revision 0-3 +00 + +# 61 Module Maximum Thickness +# bits[3:0]: 0 = thickness front <= 1mm +# bits[7:4]: 0 = thinkness back <= 1mm +00 + +# 62 Reference Raw Card Used +# bits[4:0]: 0 = Reference Raw card A used +# bits[6:5]: 0 = revision 0 +# bit7 : 0 = Reference raw cards A through AL +00 + +# 63 Address Mapping from Edge Connector to DRAM +# bit0 : 0 = standard mapping (not mirrored) +# bits[7:1]: reserved +00 + +# 64 - 71 (reserved) +00 00 00 00 00 00 00 00 + +# 72 - 79 (reserved) +00 00 00 00 00 00 00 00 + +# 80 - 87 (reserved) +00 00 00 00 00 00 00 00 + +# 88 - 95 (reserved) +00 00 00 00 00 00 00 00 + +# 96 - 103 (reserved) +00 00 00 00 00 00 00 00 + +# 104 - 111 (reserved) +00 00 00 00 00 00 00 00 + +# 112 - 116 (reserved) +00 00 00 00 00 + +# 117 - 118 Module ID: Module Manufacturers JEDEC ID Code +# 0x0001 = AMD +00 01 + +# 119 Module ID: Module Manufacturing Location - oem specified +00 + +# 120 Module ID: Module Manufacture Year in BCD +# 0x13 = 2013 +# 121 Module ID: Module Manufacture week +# 0x12 = 12th week +13 12 + +# 122 - 125: Module Serial Number +00 00 00 00 + +# 126 - 127: Cyclical Redundancy Code +00 00 diff --git a/src/mainboard/pcengines/apu1/HYNIX-H5TQ4G83MFR.spd.hex b/src/mainboard/pcengines/apu1/HYNIX-H5TQ4G83MFR.spd.hex new file mode 100644 index 0000000..7aa4634 --- /dev/null +++ b/src/mainboard/pcengines/apu1/HYNIX-H5TQ4G83MFR.spd.hex @@ -0,0 +1,253 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2014 Sage Electronic Engineering, LLC. +# Copyright (C) 2014 Kyösti Mälkki <kyosti.malkki(a)gmail.com> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +# HYNIX-H5TQ4G83MFR + +# SPD contents for APU 2GB DDR3 (1333MHz PC1333) soldered down +# 0 Number of SPD Bytes used / Total SPD Size / CRC Coverage +# bits[3:0]: 1 = 128 SPD Bytes Used +# bits[6:4]: 1 = 256 SPD Bytes Total +# bit7 : 0 = CRC covers bytes 0 ~ 125 +11 + +# 1 SPD Revision - +# 0x10 = Revision 1.0 +10 +# 2 Key Byte / DRAM Device Type +# bits[7:0]: 0x0b = DDR3 SDRAM +0B + +# 3 Key Byte / Module Type +# bits[3:0]: 3 = SO-DIMM +# bits[7:4]: reserved +03 + +# 4 SDRAM CHIP Density and Banks +# bits[3:0]: 3 = 2 Gigabits Total SDRAM capacity per chip +# bits[3:0]: 4 = 4 Gigabits Total SDRAM capacity per chip +# bits[6:4]: 0 = 3 (8 banks) +# bit7 : reserved +04 + +# 5 SDRAM Addressing +# bits[2:0]: 1 = 10 Column Address Bits +# bits[5:3]: 3 = 15 Row Address Bits +# bits[5:3]: 4 = 16 Row Address Bits +# bits[7:6]: reserved +21 + +# 6 Module Nominal Voltage, VDD +# bit0 : 0 = 1.5 V operable +# bit1 : 0 = NOT 1.35 V operable +# bit2 : 0 = NOT 1.25 V operable +# bits[7:3]: reserved +00 + +# 7 Module Organization +# bits[2:0]: 1 = 8 bits +# bits[5:3]: 0 = 1 Rank +# bits[7:6]: reserved +01 + +# 8 Module Memory Bus Width +# bits[2:0]: 3 = Primary bus width is 64 bits +# bits[4:3]: 0 = 0 bits (no bus width extension) +# bits[7:5]: reserved +03 + +# 9 Fine Timebase (FTB) Dividend / Divisor +# bits[3:0]: 0x01 divisor +# bits[7:4]: 0x01 dividend +# 1 / 1 = 1.0 ps +11 + +# 10 Medium Timebase (MTB) Dividend +# 11 Medium Timebase (MTB) Divisor +# 1 / 8 = .125 ns +01 08 + +# 12 SDRAM Minimum Cycle Time (tCKmin) +# 0x0c = tCKmin of 1.5 ns = in multiples of MTB +0C + +# 13 Reserved +00 + +# 14 CAS Latencies Supported, Least Significant Byte +# 15 CAS Latencies Supported, Most Significant Byte +# Cas Latencies of 11 - 5 are supported +7E 00 + +# 16 Minimum CAS Latency Time (tAAmin) +# 0x6C = 13.5ns - DDR3-1333 +6C + +# 17 Minimum Write Recovery Time (tWRmin) +# 0x78 = tWR of 15ns - All DDR3 speed grades +78 + +# 18 Minimum RAS# to CAS# Delay Time (tRCDmin) +# 0x6E = 13.5ns - DDR3-1333 +6C + +# 19 Minimum Row Active to Row Active Delay Time (tRRDmin) +# 0x30 = 6ns +30 + +# 20 Minimum Row Precharge Delay Time (tRPmin) +# 0x6C = 13.5ns - DDR3-1333 +6C + +# 21 Upper Nibbles for tRAS and tRC +# bits[3:0]: tRAS most significant nibble = 1 (see byte 22) +# bits[7:4]: tRC most significant nibble = 1 (see byte 23) +11 + +# 22 Minimum Active to Precharge Delay Time (tRASmin), LSB +# 0x120 = 36ns - DDR3-1333 (see byte 21) +20 + +# 23 Minimum Active to Active/Refresh Delay Time (tRCmin), LSB +# 0x28C = 49.5ns - DDR3-1333 +8C + +# 24 Minimum Refresh Recovery Delay Time (tRFCmin), LSB +# 25 Minimum Refresh Recovery Delay Time (tRFCmin), MSB +# 0x500 = 160ns - for 2 Gigabit chips +00 05 + +# 26 Minimum Internal Write to Read Command Delay Time (tWTRmin) +# 0x3c = 7.5 ns - All DDR3 SDRAM speed bins +3C + +# 27 Minimum Internal Read to Precharge Command Delay Time (tRTPmin) +# 0x3c = 7.5ns - All DDR3 SDRAM speed bins +3C + +# 28 Upper Nibble for tFAWmin +# 29 Minimum Four Activate Window Delay Time (tFAWmin) +# 0x00F0 = 30ns - DDR3-1333, 1 KB page size +00 F0 + +# 30 SDRAM Optional Feature +# bit0 : 1= RZQ/6 supported +# bit1 : 1 = RZQ/7 supported +# bits[6:2]: reserved +# bit7 : 1 = DLL Off mode supported +83 + +# 31 SDRAM Thermal and Refresh Options +# bit0 : 1 = Temp up to 95c supported +# bit1 : 0 = 85-95c uses 2x refresh rate +# bit2 : 1 = Auto Self Refresh supported +# bit3 : 0 = no on die thermal sensor +# bits[6:4]: reserved +# bit7 : 0 = partial self refresh supported +05 + +# 32 Module Thermal Sensor +# 0 = Thermal sensor not incorporated onto this assembly +00 + +# 33 SDRAM Device Type +# bits[1:0]: 2 = Signal Loading +# bits[3:2]: reserved +# bits[6:4]: 4 = Die count +# bit7 : 0 = Standard Monolithic DRAM Device +42 + +# 34 Fine Offset for SDRAM Minimum Cycle Time (tCKmin) +# 35 Fine Offset for Minimum CAS Latency Time (tAAmin) +# 36 Fine Offset for Minimum RAS# to CAS# Delay Time (tRCDmin) +# 37 Fine Offset for Minimum Row Precharge Delay Time (tRPmin) +# 38 Fine Offset for Minimum Active to Active/Refresh Delay (tRCmin) +00 00 00 00 00 + +# 39 (reserved) +00 + +# 40 - 47 (reserved) +00 00 00 00 00 00 00 00 + +# 48 - 55 (reserved) +00 00 00 00 00 00 00 00 + +# 56 - 59 (reserved) +00 00 00 00 + +# 60 Raw Card Extension, Module Nominal Height +# bits[4:0]: 0 = <= 15mm tall +# bits[7:5]: 0 = raw card revision 0-3 +00 + +# 61 Module Maximum Thickness +# bits[3:0]: 0 = thickness front <= 1mm +# bits[7:4]: 0 = thinkness back <= 1mm +00 + +# 62 Reference Raw Card Used +# bits[4:0]: 0 = Reference Raw card A used +# bits[6:5]: 0 = revision 0 +# bit7 : 0 = Reference raw cards A through AL +00 + +# 63 Address Mapping from Edge Connector to DRAM +# bit0 : 0 = standard mapping (not mirrored) +# bits[7:1]: reserved +00 + +# 64 - 71 (reserved) +00 00 00 00 00 00 00 00 + +# 72 - 79 (reserved) +00 00 00 00 00 00 00 00 + +# 80 - 87 (reserved) +00 00 00 00 00 00 00 00 + +# 88 - 95 (reserved) +00 00 00 00 00 00 00 00 + +# 96 - 103 (reserved) +00 00 00 00 00 00 00 00 + +# 104 - 111 (reserved) +00 00 00 00 00 00 00 00 + +# 112 - 116 (reserved) +00 00 00 00 00 + +# 117 - 118 Module ID: Module Manufacturers JEDEC ID Code +# 0x0001 = AMD +00 01 + +# 119 Module ID: Module Manufacturing Location - oem specified +00 + +# 120 Module ID: Module Manufacture Year in BCD +# 0x13 = 2013 +# 121 Module ID: Module Manufacture week +# 0x12 = 12th week +13 12 + +# 122 - 125: Module Serial Number +00 00 00 00 + +# 126 - 127: Cyclical Redundancy Code +00 00 diff --git a/src/mainboard/pcengines/apu1/Kconfig b/src/mainboard/pcengines/apu1/Kconfig index ade4b72..8b87961 100644 --- a/src/mainboard/pcengines/apu1/Kconfig +++ b/src/mainboard/pcengines/apu1/Kconfig @@ -2,6 +2,7 @@ # This file is part of the coreboot project. # # Copyright (C) 2011 Advanced Micro Devices, Inc. +# Copyright (C) 2014 Kyösti Mälkki <kyosti.malkki(a)gmail.com> # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -17,28 +18,29 @@ # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA # -if BOARD_AMD_PERSIMMON +if BOARD_PCENGINES_APU1 config BOARD_SPECIFIC_OPTIONS # dummy def_bool y select CPU_AMD_AGESA_FAMILY14 select NORTHBRIDGE_AMD_AGESA_FAMILY14 select SOUTHBRIDGE_AMD_CIMX_SB800 + select SUPERIO_NUVOTON_NCT5104D select HAVE_OPTION_TABLE select HAVE_PIRQ_TABLE select HAVE_MP_TABLE - select HAVE_ACPI_RESUME + #select HAVE_ACPI_RESUME select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_4096 - select GFXUMA + select BOARD_ROMSIZE_KB_2048 + select SPD_CACHE config MAINBOARD_DIR string - default amd/persimmon + default pcengines/apu1 config MAINBOARD_PART_NUMBER string - default "Persimmon" + default "APU1" config HW_MEM_HOLE_SIZEK hex @@ -81,4 +83,4 @@ config DRIVERS_PS2_KEYBOARD bool default n -endif # BOARD_AMD_PERSIMMON +endif # BOARD_PCENGINES_APU1 diff --git a/src/mainboard/pcengines/apu1/Makefile.inc b/src/mainboard/pcengines/apu1/Makefile.inc index c82834c..7fbed57 100644 --- a/src/mainboard/pcengines/apu1/Makefile.inc +++ b/src/mainboard/pcengines/apu1/Makefile.inc @@ -2,6 +2,8 @@ # This file is part of the coreboot project. # # Copyright (C) 2011 Advanced Micro Devices, Inc. +# Copyright (C) 2013 Sage Electronic Engineering, LLC +# Copyright (C) 2014 Kyösti Mälkki <kyosti.malkki(a)gmail.com> # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -31,3 +33,23 @@ romstage-y += PlatformGnbPcie.c ramstage-y += buildOpts.c ramstage-y += BiosCallOuts.c ramstage-y += PlatformGnbPcie.c + +## DIMM SPD for on-board memory +SPD_BIN = $(obj)/spd.bin + +# Order of names in SPD_SOURCES is important! +SPD_SOURCES = HYNIX-H5TQ2G83CFR HYNIX-H5TQ4G83MFR + +SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/$(f).spd.hex) + +# Include spd rom data +$(SPD_BIN): $(SPD_DEPS) + for f in $+; \ + do for c in $$(cat $$f | grep -v ^#); \ + do echo -e -n "\\x$$c"; \ + done; \ + done > $@ + +cbfs-files-y += spd.bin +spd.bin-file := $(SPD_BIN) +spd.bin-type := 0xab diff --git a/src/mainboard/pcengines/apu1/PlatformGnbPcie.c b/src/mainboard/pcengines/apu1/PlatformGnbPcie.c index f2fe96b..26cdc4a 100644 --- a/src/mainboard/pcengines/apu1/PlatformGnbPcie.c +++ b/src/mainboard/pcengines/apu1/PlatformGnbPcie.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2011 Advanced Micro Devices, Inc. + * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -23,8 +24,6 @@ #include <northbridge/amd/agesa/agesawrapper.h> #include <vendorcode/amd/agesa/f14/Proc/CPU/heapManager.h> -#define FILECODE PROC_RECOVERY_MEM_NB_ON_MRNON_FILECODE - /** * OemCustomizeInitEarly * @@ -53,25 +52,25 @@ PCIe_PORT_DESCRIPTOR PortList [] = { { 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 46) + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 4) }, // Initialize Port descriptor (PCIe port, Lanes 5, PCI Device Number 5, ...) { 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 5, 5), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, GNB_GPP_PORT5_CHANNEL_TYPE, 5, GNB_GPP_PORT5_HOTPLUG_SUPPORT, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_LINK_ASPM, 46) + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, GNB_GPP_PORT5_CHANNEL_TYPE, 5, GNB_GPP_PORT5_HOTPLUG_SUPPORT, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_LINK_ASPM, 5) }, // Initialize Port descriptor (PCIe port, Lanes 6, PCI Device Number 6, ...) { 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 46) + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 6) }, // Initialize Port descriptor (PCIe port, Lanes 7, PCI Device Number 7, ...) { 0, PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 7, 7), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT7_PORT_PRESENT, GNB_GPP_PORT7_CHANNEL_TYPE, 7, GNB_GPP_PORT7_HOTPLUG_SUPPORT, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_LINK_ASPM, 0) + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT7_PORT_PRESENT, GNB_GPP_PORT7_CHANNEL_TYPE, 7, GNB_GPP_PORT7_HOTPLUG_SUPPORT, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_LINK_ASPM, 7) }, // Initialize Port descriptor (PCIe port, Lanes 8, PCI Device Number 8, ...) { @@ -84,18 +83,11 @@ PCIe_PORT_DESCRIPTOR PortList [] = { PCIe_DDI_DESCRIPTOR DdiList [] = { // Initialize Ddi descriptor (DDI interface Lanes 8:11, DdA, ...) { - 0, //Descriptor flags + DESCRIPTOR_TERMINATE_LIST, //Descriptor flags PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11), //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1) - {ConnectorTypeLvds, Aux1, Hdp1} + {ConnectorTypeDP, Aux1, Hdp1} }, - // Initialize Ddi descriptor (DDI interface Lanes 12:15, DdB, ...) - { - DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15), - //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2) - {ConnectorTypeDP, Aux2, Hdp2} - } }; PCIe_COMPLEX_DESCRIPTOR Brazos = { diff --git a/src/mainboard/pcengines/apu1/PlatformGnbPcieComplex.h b/src/mainboard/pcengines/apu1/PlatformGnbPcieComplex.h index 4a01875..89a41a1 100644 --- a/src/mainboard/pcengines/apu1/PlatformGnbPcieComplex.h +++ b/src/mainboard/pcengines/apu1/PlatformGnbPcieComplex.h @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2011 Advanced Micro Devices, Inc. + * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -50,7 +51,7 @@ #define GNB_GPP_PORT6_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced //GNB GPP Port7 -#define GNB_GPP_PORT7_PORT_PRESENT 0 //0:Disable 1:Enable +#define GNB_GPP_PORT7_PORT_PRESENT 1 //0:Disable 1:Enable #define GNB_GPP_PORT7_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 #define GNB_GPP_PORT7_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 #define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) diff --git a/src/mainboard/pcengines/apu1/acpi/routing.asl b/src/mainboard/pcengines/apu1/acpi/routing.asl index 0395700..cd38608 100644 --- a/src/mainboard/pcengines/apu1/acpi/routing.asl +++ b/src/mainboard/pcengines/apu1/acpi/routing.asl @@ -73,7 +73,7 @@ Scope(\_SB) { /* OHCI, dev 18, 19, 22 func 0 * EHCI, dev 18, 19, 22 func 2 */ - Package(){0x0012FFFF, 0, INTC, 0 }, /* Dev 12, INTA, handled by INTC device, Global */ + Package(){0x0012FFFF, 0, INTC, 0 }, /* Dev 12, INTA, handled by INTC device, Global */ Package(){0x0012FFFF, 1, INTB, 0 }, /* Dev 12, INTB, handled by INTB device, Global */ Package(){0x0013FFFF, 0, INTC, 0 }, diff --git a/src/mainboard/pcengines/apu1/board_info.txt b/src/mainboard/pcengines/apu1/board_info.txt index 85cb19a..6c824df 100644 --- a/src/mainboard/pcengines/apu1/board_info.txt +++ b/src/mainboard/pcengines/apu1/board_info.txt @@ -1,5 +1,5 @@ -Board name: DBFT1-00-EVAL-KT (Persimmon) -Category: eval +Board name: APU1 +Category: half ROM protocol: SPI ROM socketed: n Flashrom support: y diff --git a/src/mainboard/pcengines/apu1/buildOpts.c b/src/mainboard/pcengines/apu1/buildOpts.c index 9cf2a19..cfc9d3d 100644 --- a/src/mainboard/pcengines/apu1/buildOpts.c +++ b/src/mainboard/pcengines/apu1/buildOpts.c @@ -209,7 +209,7 @@ //#define BLDCFG_ECC_SYNC_FLOOD 0 //#define BLDCFG_ECC_SYMBOL_SIZE 0 //#define BLDCFG_1GB_ALIGN FALSE -#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO +#define BLDCFG_UMA_ALLOCATION_MODE UMA_NONE #define BLDCFG_UMA_ALLOCATION_SIZE 0 #define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE #define BLDCFG_UMA_ALIGNMENT NO_UMA_ALIGNED @@ -382,8 +382,19 @@ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { // Byte6Seed, Byte7Seed, ByteEccSeed) // Specifies the write leveling seed for a channel of a socket. // - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), + + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, TWO_DIMM), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, ONE_DIMM), + + // APU soldered down memory uses memory CLK0 and CLK1 on CS0 + MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), + + // APU soldered down memory requires different seeds +#define WLSEED 0x08 +#define RXSEED 0x40 + WRITE_LEVELING_SEED(ANY_SOCKET, ANY_CHANNEL, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED), + HW_RXEN_SEED( ANY_SOCKET, ANY_CHANNEL, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED), + PSO_END }; diff --git a/src/mainboard/pcengines/apu1/devicetree.cb b/src/mainboard/pcengines/apu1/devicetree.cb index 2f6bb14..5f6f9c9 100644 --- a/src/mainboard/pcengines/apu1/devicetree.cb +++ b/src/mainboard/pcengines/apu1/devicetree.cb @@ -2,6 +2,7 @@ # This file is part of the coreboot project. # # Copyright (C) 2011 Advanced Micro Devices, Inc. +# Copyright (C) 2014 Kyösti Mälkki <kyosti.malkki(a)gmail.com> # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -28,44 +29,65 @@ chip northbridge/amd/agesa/family14/root_complex # device pci 18.0 on # northbridge chip northbridge/amd/agesa/family14 # PCI side of HT root complex device pci 0.0 on end # Root Complex - device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456] + device pci 1.0 off end # Internal Graphics P2P bridge 0x980[2456] device pci 4.0 on end # PCIE P2P bridge on-board NIC - device pci 5.0 off end # PCIE P2P bridge + device pci 5.0 on end # PCIE P2P bridge device pci 6.0 on end # PCIE P2P bridge PCIe slot - device pci 7.0 off end # PCIE P2P bridge - device pci 8.0 off end # NB/SB Link P2P bridge + device pci 7.0 on end # PCIE P2P bridge + device pci 8.0 on end # NB/SB Link P2P bridge end # agesa northbridge chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus device pci 11.0 on end # SATA device pci 12.0 on end # OHCI USB 0-4 + device pci 12.1 on end # OHCI USB 0-4 device pci 12.2 on end # EHCI USB 0-4 device pci 13.0 on end # OHCI USB 5-9 + device pci 13.1 on end # OHCI USB 5-9 device pci 13.2 on end # EHCI USB 5-9 device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SM device pci 14.1 on end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 device pci 14.3 on # LPC 0x439d + chip superio/nuvoton/nct5104d + register "irq_trigger_type" = "0" + device pnp 2e.0 off end + device pnp 2e.2 on + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.10 off + io 0x60 = 0x3e8 + irq 0x70 = 4 + end + device pnp 2e.11 off + io 0x60 = 0x2e8 + irq 0x70 = 3 + end + device pnp 2e.8 off end + device pnp 2e.f off end + device pnp 2e.7 off end + device pnp 2e.107 off end + device pnp 2e.607 off end + device pnp 2e.e off end + end end #LPC device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} - device pci 14.5 off end # OHCI FS/LS USB - device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) - device pci 15.0 off end # PCIe PortA + device pci 14.5 on end # OHCI FS/LS USB + #device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) + device pci 15.0 on end # PCIe PortA device pci 15.1 off end # PCIe PortB device pci 15.2 off end # PCIe PortC device pci 15.3 off end # PCIe PortD - device pci 16.0 off end # OHCI USB 10-13 - device pci 16.2 off end # EHCI USB 10-13 - register "gpp_configuration" = "0" #4:0:0:0 (really need to disable all 4 somehow) + device pci 16.0 on end # OHCI USB 10-13 + device pci 16.2 on end # EHCI USB 10-13 + register "gpp_configuration" = "0" register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/cimx/sb800 # end # device pci 18.0 # These seem unnecessary @@ -78,12 +100,6 @@ chip northbridge/amd/agesa/family14/root_complex device pci 18.6 on end device pci 18.7 on end - register "spdAddrLookup" = " - { - { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses - { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses - }" - end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex end #domain end #northbridge/amd/agesa/family14/root_complex diff --git a/src/mainboard/pcengines/apu1/dsdt.asl b/src/mainboard/pcengines/apu1/dsdt.asl index 25520b2..d3b2920 100644 --- a/src/mainboard/pcengines/apu1/dsdt.asl +++ b/src/mainboard/pcengines/apu1/dsdt.asl @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2011 Advanced Micro Devices, Inc. + * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -22,7 +23,7 @@ DefinitionBlock ( "DSDT.AML", /* Output filename */ "DSDT", /* Signature */ 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "AMD ", /* OEMID */ + "PCENG ", /* OEMID */ "COREBOOT", /* TABLE ID */ 0x00010001 /* OEM Revision */ ) diff --git a/src/mainboard/pcengines/apu1/mainboard.c b/src/mainboard/pcengines/apu1/mainboard.c index 1096f05..cf0d823 100644 --- a/src/mainboard/pcengines/apu1/mainboard.c +++ b/src/mainboard/pcengines/apu1/mainboard.c @@ -2,7 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2011 Advanced Micro Devices, Inc. - * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -48,7 +48,7 @@ void set_pcie_dereset(void); * These values are used by the PCI configuration space, * MP Tables. TODO: Make ACPI use these values too. * - * The Persimmon PCI INTA/B/C/D pins are connected to + * The PCI INTA/B/C/D pins are connected to * FCH pins INTE/F/G/H on the schematic so these need * to be routed as well. */ @@ -56,13 +56,13 @@ static const u8 mainboard_picr_data[FCH_INT_TABLE_SIZE] = { /* INTA# - INTH# */ [0x00] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,0x0B, /* Misc-nil,0,1,2, INT from Serial irq */ - [0x08] = 0x00,0xF0,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + [0x08] = 0x00,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerfMon */ [0x10] = 0x1F,0x1F,0x1F,0x0A,0x1F,0x1F,0x1F, /* IMC INT0 - 5 */ [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, /* USB Devs 18/19/20/22 INTA-C */ - [0x30] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A, + [0x30] = 0x0A,0x0B,0x0A,0x0B,0x1F,0x1F,0x0A, /* IDE, SATA */ [0x40] = 0x0B,0x0B, /* GPPInt0 - 3 */ @@ -97,8 +97,8 @@ static const u8 mainboard_intr_data[FCH_INT_TABLE_SIZE] = { * use PIC IRQ 10 if it uses PIN A for its hardware INT. */ /* - * Persimmon has PCI slot INTA/B/C/D connected to PIRQE/F/G/H - * but because PCI INT_PIN swizzling isnt implemented to match + * The PCI slot INTA/B/C/D connected to PIRQE/F/G/H + * but because of PCI INT_PIN swizzle isnt implemented to match * the IDSEL (dev 3) of the slot, the table is adjusted for the * swizzle and INTA is connected to PIRQH so PINA/B/C/D on * off-chip devices should get mapped to PIRQH/E/F/G. @@ -107,7 +107,9 @@ static const struct pirq_struct mainboard_pirq_data[] = { /* {PCI_devfn, {PIN A, PIN B, PIN C, PIN D}}, */ {GFX_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_NC, PIRQ_NC}}, /* VGA: 01.0 */ {NB_PCIE_PORT1_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 04.0 */ - {NB_PCIE_PORT3_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* PCIe bdg: 06.0 */ + {NB_PCIE_PORT2_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 05.0 */ + {NB_PCIE_PORT3_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 06.0 */ + {NB_PCIE_PORT4_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* miniPCIe: 07.0 */ {SATA_DEVFN, {PIRQ_SATA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SATA: 11.0 */ {OHCI1_DEVFN, {PIRQ_OHCI1, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI1: 12.0 */ {EHCI1_DEVFN, {PIRQ_NC, PIRQ_EHCI1, PIRQ_NC, PIRQ_NC}}, /* EHCI1: 12.2 */ @@ -118,6 +120,7 @@ static const struct pirq_struct mainboard_pirq_data[] = { {HDA_DEVFN, {PIRQ_HDA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* HDA: 14.2 */ {SB_PCI_PORT_DEVFN, {PIRQ_H, PIRQ_E, PIRQ_F, PIRQ_G}}, /* PCI bdg: 14.4 */ {OHCI4_DEVFN, {PIRQ_NC, PIRQ_NC, PIRQ_OHCI4, PIRQ_NC}}, /* OHCI4: 14.5 */ + {SB_PCIE_PORT1_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* miniPCIe: 15.0 */ {OHCI3_DEVFN, {PIRQ_OHCI3, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI3: 16.0 */ {EHCI3_DEVFN, {PIRQ_NC, PIRQ_EHCI3, PIRQ_NC, PIRQ_NC}}, /* EHCI3: 16.2 */ }; @@ -147,7 +150,6 @@ void set_pcie_dereset(void) { } - /********************************************** * Enable the dedicated functions of the board. **********************************************/ diff --git a/src/mainboard/pcengines/apu1/mptable.c b/src/mainboard/pcengines/apu1/mptable.c index 1227d89..4686d62 100644 --- a/src/mainboard/pcengines/apu1/mptable.c +++ b/src/mainboard/pcengines/apu1/mptable.c @@ -111,6 +111,8 @@ static void *smp_write_config_table(void *v) /* on board NIC & Slot PCIE */ PCI_INT(0x1, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */ PCI_INT(0x2, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */ + PCI_INT(0x3, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */ + PCI_INT(0x4, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */ /* PCI slots */ device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); diff --git a/src/mainboard/pcengines/apu1/platform_cfg.h b/src/mainboard/pcengines/apu1/platform_cfg.h index 097c835..2efe905 100644 --- a/src/mainboard/pcengines/apu1/platform_cfg.h +++ b/src/mainboard/pcengines/apu1/platform_cfg.h @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2011 Advanced Micro Devices, Inc. + * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,6 +22,9 @@ #ifndef _PLATFORM_CFG_H_ #define _PLATFORM_CFG_H_ +/* APU has no legacy P/S2 controller */ +#define LEGACY_FREE 0 /* setting legacy free disables I/O access to 0x3F8 */ + /** * @def BIOS_SIZE * BIOS_SIZE_{1,2,4,8,16}M @@ -75,7 +79,7 @@ * PCI SLOT 3 define at BIT3 * PCI SLOT 4 define at BIT4 */ -#define PCI_CLOCK_CTRL 0x07 +#define PCI_CLOCK_CTRL 0x1F /** * @def SATA_CONTROLLER @@ -182,7 +186,7 @@ * GPP_CFGMODE_X2110 * GPP_CFGMODE_X1111 */ -#define GPP_CFGMODE GPP_CFGMODE_X1111 +#define GPP_CFGMODE GPP_CFGMODE_X4000 /** * @def NB_SB_GEN2 @@ -203,7 +207,7 @@ * TRUE - ports visible always, even port empty * FALSE - ports invisible if port empty */ -#define SB_GPP_UNHIDE_PORTS FALSE +#define SB_GPP_UNHIDE_PORTS TRUE /** * @def GEC_CONFIG diff --git a/src/mainboard/pcengines/apu1/romstage.c b/src/mainboard/pcengines/apu1/romstage.c index d90a39d..c555536 100644 --- a/src/mainboard/pcengines/apu1/romstage.c +++ b/src/mainboard/pcengines/apu1/romstage.c @@ -39,7 +39,11 @@ #include "cbmem.h" #include <cpu/amd/mtrr.h> #include <cpu/amd/agesa/s3_resume.h> +#include <superio/nuvoton/common/nuvoton.h> +#include <superio/nuvoton/nct5104d/nct5104d.h> +#define SIO_PORT 0x2e +#define SERIAL_DEV PNP_DEV(SIO_PORT, NCT5104D_SP1) void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { @@ -62,6 +66,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) sb_Poweron_Init(); post_code(0x31); + nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); console_init(); }

1 0

New patch to review for coreboot: 543857f pcengines/apu1: Fork of amd/persimmon
by Kyösti Mälkki 02 Feb '15

02 Feb '15

Kyösti Mälkki (kyosti.malkki(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/8324 -gerrit commit 543857fc0e39639c378d3acc3e740e30f5103736 Author: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Date: Sat Jan 10 12:13:23 2015 +0200 pcengines/apu1: Fork of amd/persimmon Drop persimmon customization for superio, azalia, PCI-e reset etc. Change-Id: I35f49ca67e6cc2df826f24e5a4bb3db5bb6f711e Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> --- src/mainboard/pcengines/apu1/BiosCallOuts.c | 53 +++ src/mainboard/pcengines/apu1/Kconfig | 84 ++++ src/mainboard/pcengines/apu1/Makefile.inc | 33 ++ src/mainboard/pcengines/apu1/OptionsIds.h | 60 +++ src/mainboard/pcengines/apu1/PlatformGnbPcie.c | 143 +++++++ .../pcengines/apu1/PlatformGnbPcieComplex.h | 69 ++++ src/mainboard/pcengines/apu1/acpi/gpe.asl | 82 ++++ src/mainboard/pcengines/apu1/acpi/ide.asl | 244 +++++++++++ src/mainboard/pcengines/apu1/acpi/mainboard.asl | 67 +++ src/mainboard/pcengines/apu1/acpi/routing.asl | 340 ++++++++++++++++ src/mainboard/pcengines/apu1/acpi/sata.asl | 149 +++++++ src/mainboard/pcengines/apu1/acpi/sleep.asl | 120 ++++++ src/mainboard/pcengines/apu1/acpi/superio.asl | 18 + src/mainboard/pcengines/apu1/acpi/thermal.asl | 21 + src/mainboard/pcengines/apu1/acpi/usb_oc.asl | 174 ++++++++ src/mainboard/pcengines/apu1/acpi_tables.c | 57 +++ src/mainboard/pcengines/apu1/board_info.txt | 5 + src/mainboard/pcengines/apu1/buildOpts.c | 453 +++++++++++++++++++++ src/mainboard/pcengines/apu1/cmos.layout | 116 ++++++ src/mainboard/pcengines/apu1/devicetree.cb | 89 ++++ src/mainboard/pcengines/apu1/dsdt.asl | 69 ++++ src/mainboard/pcengines/apu1/irq_tables.c | 115 ++++++ src/mainboard/pcengines/apu1/mainboard.c | 164 ++++++++ src/mainboard/pcengines/apu1/mptable.c | 152 +++++++ src/mainboard/pcengines/apu1/platform_cfg.h | 229 +++++++++++ src/mainboard/pcengines/apu1/romstage.c | 109 +++++ 26 files changed, 3215 insertions(+) diff --git a/src/mainboard/pcengines/apu1/BiosCallOuts.c b/src/mainboard/pcengines/apu1/BiosCallOuts.c new file mode 100644 index 0000000..74b9f67 --- /dev/null +++ b/src/mainboard/pcengines/apu1/BiosCallOuts.c @@ -0,0 +1,53 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "AGESA.h" +#include "amdlib.h" +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include "heapManager.h" +#include "SB800.h" +#include <stdlib.h> + +static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr); + +const BIOS_CALLOUT_STRUCT BiosCallouts[] = +{ + {AGESA_ALLOCATE_BUFFER, agesa_AllocateBuffer }, + {AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer }, + {AGESA_LOCATE_BUFFER, agesa_LocateBuffer }, + {AGESA_DO_RESET, agesa_Reset }, + {AGESA_READ_SPD, agesa_ReadSpd }, + {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, + {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, + {AGESA_GNB_PCIE_SLOT_RESET, agesa_NoopSuccess }, + {AGESA_HOOKBEFORE_DRAM_INIT, board_BeforeDramInit }, + {AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY, agesa_NoopSuccess }, + {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, + {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, +}; +const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); + +/* Call the host environment interface to provide a user hook opportunity. */ +static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + // Unlike e.g. AMD Inagua, Persimmon is unable to vary the RAM voltage. + // Make sure the right speed settings are selected. + ((MEM_DATA_STRUCT*)ConfigPtr)->ParameterListPtr->DDR3Voltage = VOLT1_5; + return AGESA_SUCCESS; +} diff --git a/src/mainboard/pcengines/apu1/Kconfig b/src/mainboard/pcengines/apu1/Kconfig new file mode 100644 index 0000000..ade4b72 --- /dev/null +++ b/src/mainboard/pcengines/apu1/Kconfig @@ -0,0 +1,84 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +if BOARD_AMD_PERSIMMON + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_AGESA_FAMILY14 + select NORTHBRIDGE_AMD_AGESA_FAMILY14 + select SOUTHBRIDGE_AMD_CIMX_SB800 + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_4096 + select GFXUMA + +config MAINBOARD_DIR + string + default amd/persimmon + +config MAINBOARD_PART_NUMBER + string + default "Persimmon" + +config HW_MEM_HOLE_SIZEK + hex + default 0x200000 + +config MAX_CPUS + int + default 2 + +config HW_MEM_HOLE_SIZE_AUTO_INC + bool + default n + +config IRQ_SLOT_COUNT + int + default 11 + +config ONBOARD_VGA_IS_PRIMARY + bool + default y + +config VGA_BIOS + bool + default n + +#config VGA_BIOS_FILE +# string "VGA BIOS path and filename" +# depends on VGA_BIOS +# default "rom/video/OntarioGenericVbios.bin" + +config VGA_BIOS_ID + string + default "1002,9802" + +config SB800_AHCI_ROM + bool + default n + +config DRIVERS_PS2_KEYBOARD + bool + default n + +endif # BOARD_AMD_PERSIMMON diff --git a/src/mainboard/pcengines/apu1/Makefile.inc b/src/mainboard/pcengines/apu1/Makefile.inc new file mode 100644 index 0000000..c82834c --- /dev/null +++ b/src/mainboard/pcengines/apu1/Makefile.inc @@ -0,0 +1,33 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +ifeq ($(CONFIG_AHCI_BIOS),y) +stripped_ahcibios_id = $(call strip_quotes,$(CONFIG_AHCI_BIOS_ID)) +cbfs-files-$(CONFIG_AHCI_BIOS) += pci$(stripped_ahcibios_id).rom +pci$(stripped_ahcibios_id).rom-file := $(call strip_quotes,$(CONFIG_AHCI_BIOS_FILE)) +pci$(stripped_ahcibios_id).rom-type := optionrom +endif + +romstage-y += buildOpts.c +romstage-y += BiosCallOuts.c +romstage-y += PlatformGnbPcie.c + +ramstage-y += buildOpts.c +ramstage-y += BiosCallOuts.c +ramstage-y += PlatformGnbPcie.c diff --git a/src/mainboard/pcengines/apu1/OptionsIds.h b/src/mainboard/pcengines/apu1/OptionsIds.h new file mode 100644 index 0000000..23494d4 --- /dev/null +++ b/src/mainboard/pcengines/apu1/OptionsIds.h @@ -0,0 +1,60 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * @file + * + * IDS Option File + * + * This file is used to switch on/off IDS features. + * + */ +#ifndef _OPTION_IDS_H_ +#define _OPTION_IDS_H_ + +/** + * + * This file generates the defaults tables for the Integrated Debug Support + * Module. The documented build options are imported from a user controlled + * file for processing. The build options for the Integrated Debug Support + * Module are listed below: + * + * IDSOPT_IDS_ENABLED + * IDSOPT_ERROR_TRAP_ENABLED + * IDSOPT_CONTROL_ENABLED + * IDSOPT_TRACING_ENABLED + * IDSOPT_PERF_ANALYSIS + * IDSOPT_ASSERT_ENABLED + * IDS_DEBUG_PORT + * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED + * + **/ + +#define IDSOPT_IDS_ENABLED TRUE +//#define IDSOPT_TRACING_ENABLED TRUE +#define IDSOPT_ASSERT_ENABLED TRUE + +//#define IDSOPT_DEBUG_ENABLED FALSE +//#undef IDSOPT_HOST_SIMNOW +//#define IDSOPT_HOST_SIMNOW FALSE +//#undef IDSOPT_HOST_HDT +//#define IDSOPT_HOST_HDT FALSE +//#define IDS_DEBUG_PORT 0x80 + +#endif diff --git a/src/mainboard/pcengines/apu1/PlatformGnbPcie.c b/src/mainboard/pcengines/apu1/PlatformGnbPcie.c new file mode 100644 index 0000000..f2fe96b --- /dev/null +++ b/src/mainboard/pcengines/apu1/PlatformGnbPcie.c @@ -0,0 +1,143 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "PlatformGnbPcieComplex.h" + +#include <string.h> +#include <northbridge/amd/agesa/agesawrapper.h> +#include <vendorcode/amd/agesa/f14/Proc/CPU/heapManager.h> + +#define FILECODE PROC_RECOVERY_MEM_NB_ON_MRNON_FILECODE + +/** + * OemCustomizeInitEarly + * + * Description: + * This stub function will call the host environment through the binary block + * interface (call-out port) to provide a user hook opportunity + * + * Parameters: + * @param[in] *InitEarly + * + * @retval VOID + * + **/ + +static AGESA_STATUS OemInitEarly(AMD_EARLY_PARAMS * InitEarly) +{ + AGESA_STATUS Status; + VOID *BrazosPcieComplexListPtr; + VOID *BrazosPciePortPtr; + VOID *BrazosPcieDdiPtr; + + ALLOCATE_HEAP_PARAMS AllocHeapParams; + +PCIe_PORT_DESCRIPTOR PortList [] = { + // Initialize Port descriptor (PCIe port, Lanes 4, PCI Device Number 4, ...) + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 46) + }, + // Initialize Port descriptor (PCIe port, Lanes 5, PCI Device Number 5, ...) + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 5, 5), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, GNB_GPP_PORT5_CHANNEL_TYPE, 5, GNB_GPP_PORT5_HOTPLUG_SUPPORT, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_LINK_ASPM, 46) + }, + // Initialize Port descriptor (PCIe port, Lanes 6, PCI Device Number 6, ...) + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 46) + }, + // Initialize Port descriptor (PCIe port, Lanes 7, PCI Device Number 7, ...) + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 7, 7), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT7_PORT_PRESENT, GNB_GPP_PORT7_CHANNEL_TYPE, 7, GNB_GPP_PORT7_HOTPLUG_SUPPORT, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_LINK_ASPM, 0) + }, + // Initialize Port descriptor (PCIe port, Lanes 8, PCI Device Number 8, ...) + { + DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT8_PORT_PRESENT, GNB_GPP_PORT8_CHANNEL_TYPE, 8, GNB_GPP_PORT8_HOTPLUG_SUPPORT, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_LINK_ASPM, 0) + } +}; + +PCIe_DDI_DESCRIPTOR DdiList [] = { + // Initialize Ddi descriptor (DDI interface Lanes 8:11, DdA, ...) + { + 0, //Descriptor flags + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11), + //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1) + {ConnectorTypeLvds, Aux1, Hdp1} + }, + // Initialize Ddi descriptor (DDI interface Lanes 12:15, DdB, ...) + { + DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15), + //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2) + {ConnectorTypeDP, Aux2, Hdp2} + } +}; + +PCIe_COMPLEX_DESCRIPTOR Brazos = { + DESCRIPTOR_TERMINATE_LIST, + 0, + &PortList[0], + &DdiList[0] +}; + + // GNB PCIe topology Porting + + // + // Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR + // + AllocHeapParams.RequestedBufferSize = sizeof(Brazos) + sizeof(PortList) + sizeof(DdiList); + + AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START; + AllocHeapParams.Persist = HEAP_LOCAL_CACHE; + Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader); + ASSERT(Status == AGESA_SUCCESS); + + BrazosPcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr; + + AllocHeapParams.BufferPtr += sizeof(Brazos); + BrazosPciePortPtr = (PCIe_PORT_DESCRIPTOR *)AllocHeapParams.BufferPtr; + + AllocHeapParams.BufferPtr += sizeof(PortList); + BrazosPcieDdiPtr = (PCIe_DDI_DESCRIPTOR *) AllocHeapParams.BufferPtr; + + memcpy(BrazosPcieComplexListPtr, &Brazos, sizeof(Brazos)); + memcpy(BrazosPciePortPtr, &PortList[0], sizeof(PortList)); + memcpy(BrazosPcieDdiPtr, &DdiList[0], sizeof(DdiList)); + + + ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->PciePortList = (PCIe_PORT_DESCRIPTOR*)BrazosPciePortPtr; + ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->DdiLinkList = (PCIe_DDI_DESCRIPTOR*)BrazosPcieDdiPtr; + + InitEarly->GnbConfig.PcieComplexList = BrazosPcieComplexListPtr; + InitEarly->GnbConfig.PsppPolicy = 0; + return AGESA_SUCCESS; +} + +const struct OEM_HOOK OemCustomize = { + .InitEarly = OemInitEarly, +}; diff --git a/src/mainboard/pcengines/apu1/PlatformGnbPcieComplex.h b/src/mainboard/pcengines/apu1/PlatformGnbPcieComplex.h new file mode 100644 index 0000000..4a01875 --- /dev/null +++ b/src/mainboard/pcengines/apu1/PlatformGnbPcieComplex.h @@ -0,0 +1,69 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H +#define _PLATFORM_GNB_PCIE_COMPLEX_H + +#include "Porting.h" +#include "AGESA.h" +#include "amdlib.h" +#include <cpu/amd/agesa/s3_resume.h> + +//GNB GPP Port4 +#define GNB_GPP_PORT4_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT4_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 +#define GNB_GPP_PORT4_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 +#define GNB_GPP_PORT4_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) +#define GNB_GPP_PORT4_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced + +//GNB GPP Port5 +#define GNB_GPP_PORT5_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT5_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 +#define GNB_GPP_PORT5_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 +#define GNB_GPP_PORT5_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) +#define GNB_GPP_PORT5_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced + +//GNB GPP Port6 +#define GNB_GPP_PORT6_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT6_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 +#define GNB_GPP_PORT6_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 +#define GNB_GPP_PORT6_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) +#define GNB_GPP_PORT6_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced + +//GNB GPP Port7 +#define GNB_GPP_PORT7_PORT_PRESENT 0 //0:Disable 1:Enable +#define GNB_GPP_PORT7_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 +#define GNB_GPP_PORT7_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 +#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) +#define GNB_GPP_PORT7_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced + +//GNB GPP Port8 +#define GNB_GPP_PORT8_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT8_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 +#define GNB_GPP_PORT8_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 +#define GNB_GPP_PORT8_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) +#define GNB_GPP_PORT8_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced + + +#endif //_PLATFORM_GNB_PCIE_COMPLEX_H diff --git a/src/mainboard/pcengines/apu1/acpi/gpe.asl b/src/mainboard/pcengines/apu1/acpi/gpe.asl new file mode 100644 index 0000000..bb47ded --- /dev/null +++ b/src/mainboard/pcengines/apu1/acpi/gpe.asl @@ -0,0 +1,82 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Scope(\_GPE) { /* Start Scope GPE */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\\_GPE\\_L00\n") */ + Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\\_GPE\\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\\_GPE\\_L09\n") */ + /* Notify (\_TZ.TZ00, 0x80) */ + } + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\\_GPE\\_L0B\n") */ + Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\\_GPE\\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\\_GPE\\_L11\n") */ + } + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\\_GPE\\_L18\n") */ + Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\\_GPE\\_L1B\n") */ + Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } +} /* End Scope GPE */ + +/* Contains the GPEs for USB overcurrent */ +#include "usb_oc.asl" diff --git a/src/mainboard/pcengines/apu1/acpi/ide.asl b/src/mainboard/pcengines/apu1/acpi/ide.asl new file mode 100644 index 0000000..4071f85 --- /dev/null +++ b/src/mainboard/pcengines/apu1/acpi/ide.asl @@ -0,0 +1,244 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "ide.asl" + } + } +} +*/ + +/* Some timing tables */ +Name(UDTT, Package(){ /* Udma timing table */ + 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ +}) + +Name(MDTT, Package(){ /* MWDma timing table */ + 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ +}) + +Name(POTT, Package(){ /* Pio timing table */ + 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ +}) + +/* Some timing register value tables */ +Name(MDRT, Package(){ /* MWDma timing register table */ + 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ +}) + +Name(PORT, Package(){ + 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ +}) + +OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ + Field(ICRG, AnyAcc, NoLock, Preserve) +{ + PPTS, 8, /* Primary PIO Slave Timing */ + PPTM, 8, /* Primary PIO Master Timing */ + OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ + PMTM, 8, /* Primary MWDMA Master Timing */ + OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ + OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ + PPSM, 4, /* Primary PIO slave Mode */ + OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ + OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ + PDSM, 4, /* Primary UltraDMA Mode */ +} + +Method(GTTM, 1) /* get total time*/ +{ + Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ + Increment(Local0) + Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ + Increment(Local1) + Return(Multiply(30, Add(Local0, Local1))) +} + +Device(PRID) +{ + Name (_ADR, Zero) + Method(_GTM, 0, Serialized) + { + NAME(OTBF, Buffer(20) { /* out buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ + CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ + + /* Just return if the channel is disabled */ + If(And(PPCR, 0x01)) { /* primary PIO control */ + Return(OTBF) + } + + /* Always tell them independent timing available and IOChannelReady used on both drives */ + Or(BFFG, 0x1A, BFFG) + + Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ + Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ + + If(And(PDCR, 0x01)) { /* It's under UDMA mode */ + Or(BFFG, 0x01, BFFG) + Store(DerefOf(Index(UDTT, PDMM)), DSD0) + } + Else { + Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ + } + + If(And(PDCR, 0x02)) { /* It's under UDMA mode */ + Or(BFFG, 0x04, BFFG) + Store(DerefOf(Index(UDTT, PDSM)), DSD1) + } + Else { + Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ + } + + Return(OTBF) /* out buffer */ + } /* End Method(_GTM) */ + + Method(_STM, 3, Serialized) + { + NAME(INBF, Buffer(20) { /* in buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ + CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(INBF, 16, BFFG) /*buffer flag */ + + Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) + Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ + Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) + Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ + + Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ + Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ + + If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) + Divide(Local0, 7, PDMM,) + Or(PDCR, 0x01, PDCR) + } + Else { + If(LNotEqual(DSD0, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTM) + } + } + + If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) + Divide(Local0, 7, PDSM,) + Or(PDCR, 0x02, PDCR) + } + Else { + If(LNotEqual(DSD1, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTS) + } + } + /* Return(INBF) */ + } /*End Method(_STM) */ + Device(MST) + { + Name(_ADR, 0) + Method(_GTF, 0, Serialized) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xA0, CMDA) + Store(0xA0, CMDB) + Store(0xA0, CMDC) + + Or(PPMM, 0x08, POMD) + + If(And(PDCR, 0x01)) { + Or(PDMM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTM), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(MST) */ + + Device(SLAV) + { + Name(_ADR, 1) + Method(_GTF, 0, Serialized) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xB0, CMDA) + Store(0xB0, CMDB) + Store(0xB0, CMDC) + + Or(PPSM, 0x08, POMD) + + If(And(PDCR, 0x02)) { + Or(PDSM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTS), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(SLAV) */ +} diff --git a/src/mainboard/pcengines/apu1/acpi/mainboard.asl b/src/mainboard/pcengines/apu1/acpi/mainboard.asl new file mode 100644 index 0000000..1f532cf --- /dev/null +++ b/src/mainboard/pcengines/apu1/acpi/mainboard.asl @@ -0,0 +1,67 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Data to be patched by the BIOS during POST */ +/* FIXME the patching is not done yet! */ +/* Memory related values */ +Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ +Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ +Name(PBLN, 0x0) /* Length of BIOS area */ + +Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ +Name(HPBA, 0xFED00000) /* Base address of HPET table */ + +Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + +/* Some global data */ +Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ +Name(OSV, Ones) /* Assume nothing */ +Name(PMOD, One) /* Assume APIC */ + +Scope(\_SB) { + Method(OSFL, 0){ + + if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ + + if(CondRefOf(\_OSI,Local1)) + { + Store(1, OSVR) /* Assume some form of XP */ + if (\_OSI("Windows 2006")) /* Vista */ + { + Store(2, OSVR) + } + } else { + If(WCMP(\_OS,"Linux")) { + Store(3, OSVR) /* Linux */ + } Else { + Store(4, OSVR) /* Gotta be WinCE */ + } + } + Return(OSVR) + } +} + +Scope(\_SI) { + Method(_SST, 1) { + /* DBGO("\\_SI\\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } +} /* End Scope SI */ diff --git a/src/mainboard/pcengines/apu1/acpi/routing.asl b/src/mainboard/pcengines/apu1/acpi/routing.asl new file mode 100644 index 0000000..0395700 --- /dev/null +++ b/src/mainboard/pcengines/apu1/acpi/routing.asl @@ -0,0 +1,340 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Scope(\_SB) { + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + Package(){0x0001FFFF, 0, INTC, 0 }, + Package(){0x0001FFFF, 1, INTD, 0 }, + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, INTD, 0 }, + Package(){0x0003FFFF, 1, INTA, 0 }, + Package(){0x0003FFFF, 2, INTB, 0 }, + Package(){0x0003FFFF, 3, INTC, 0 }, + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + Package(){0x0005FFFF, 0, INTB, 0 }, + Package(){0x0005FFFF, 1, INTC, 0 }, + Package(){0x0005FFFF, 2, INTD, 0 }, + Package(){0x0005FFFF, 3, INTA, 0 }, + /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ + Package(){0x0006FFFF, 0, INTC, 0 }, + Package(){0x0006FFFF, 1, INTD, 0 }, + Package(){0x0006FFFF, 2, INTA, 0 }, + Package(){0x0006FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ + Package(){0x0007FFFF, 0, INTD, 0 }, + Package(){0x0007FFFF, 1, INTA, 0 }, + Package(){0x0007FFFF, 2, INTB, 0 }, + Package(){0x0007FFFF, 3, INTC, 0 }, + + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + + /* SB devices */ + /* Bus 0, Dev 17 - SATA controller */ + Package(){0x0011FFFF, 0, INTD, 0 }, + + /* OHCI, dev 18, 19, 22 func 0 + * EHCI, dev 18, 19, 22 func 2 */ + Package(){0x0012FFFF, 0, INTC, 0 }, /* Dev 12, INTA, handled by INTC device, Global */ + Package(){0x0012FFFF, 1, INTB, 0 }, /* Dev 12, INTB, handled by INTB device, Global */ + + Package(){0x0013FFFF, 0, INTC, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + + Package(){0x0016FFFF, 0, INTC, 0 }, + Package(){0x0016FFFF, 1, INTB, 0 }, + + /* Bus 0, Dev 20 - F0:SMBus/ACPI; F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + + Package(){0x0015FFFF, 0, INTA, 0 }, + Package(){0x0015FFFF, 1, INTB, 0 }, + Package(){0x0015FFFF, 2, INTC, 0 }, + Package(){0x0015FFFF, 3, INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + Package(){0x0001FFFF, 0, 0, 18 }, + Package(){0x0001FFFF, 1, 0, 19 }, + + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, 0, 18 }, + /* Package(){0x0002FFFF, 1, 0, 19 }, */ + /* Package(){0x0002FFFF, 2, 0, 16 }, */ + /* Package(){0x0002FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, 0, 19 }, + Package(){0x0003FFFF, 1, 0, 16 }, + Package(){0x0003FFFF, 2, 0, 17 }, + Package(){0x0003FFFF, 3, 0, 18 }, + + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, 0, 16 }, + Package(){0x0004FFFF, 1, 0, 17 }, + Package(){0x0004FFFF, 2, 0, 18 }, + Package(){0x0004FFFF, 3, 0, 19 }, + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + Package(){0x0005FFFF, 0, 0, 17 }, + Package(){0x0005FFFF, 1, 0, 18 }, + Package(){0x0005FFFF, 2, 0, 19 }, + Package(){0x0005FFFF, 3, 0, 16 }, + + /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ + Package(){0x0006FFFF, 0, 0, 18 }, + Package(){0x0006FFFF, 1, 0, 19 }, + Package(){0x0006FFFF, 2, 0, 16 }, + Package(){0x0006FFFF, 3, 0, 17 }, + + /* Bus 0, Dev 7 - PCIe Bridge for network card */ + Package(){0x0007FFFF, 0, 0, 19 }, + Package(){0x0007FFFF, 1, 0, 16 }, + Package(){0x0007FFFF, 2, 0, 17 }, + Package(){0x0007FFFF, 3, 0, 18 }, + + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices in APIC mode */ + /* Bus 0, Dev 17 - SATA controller */ + Package(){0x0011FFFF, 0, 0, 19 }, + + /* OHCI, dev 18, 19, 22 func 0 + * EHCI, dev 18, 19, 22 func 2 */ + Package(){0x0012FFFF, 0, 0, 18 }, + Package(){0x0012FFFF, 1, 0, 17 }, + + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 17 }, + + Package(){0x0016FFFF, 0, 0, 18 }, + Package(){0x0016FFFF, 1, 0, 17 }, + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + /* Package(){0x00140004, 2, 0, 18 }, */ + /* Package(){0x00140004, 3, 0, 19 }, */ + /* Package(){0x00140005, 1, 0, 17 }, */ + /* Package(){0x00140006, 1, 0, 17 }, */ + + /* TODO: pcie */ + Package(){0x0015FFFF, 0, 0, 16 }, + Package(){0x0015FFFF, 1, 0, 17 }, + Package(){0x0015FFFF, 2, 0, 18 }, + Package(){0x0015FFFF, 3, 0, 19 }, + }) + + Name(PR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, INTA, 0 }, + Package(){0x0005FFFF, 1, INTB, 0 }, + Package(){0x0005FFFF, 2, INTC, 0 }, + Package(){0x0005FFFF, 3, INTD, 0 }, + }) + Name(APR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, 0, 18 }, + Package(){0x0005FFFF, 1, 0, 19 }, + /* Package(){0x0005FFFF, 2, 0, 20 }, */ + /* Package(){0x0005FFFF, 3, 0, 17 }, */ + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PE0, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + Name(APE0, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PE1, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + Name(APE1, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PE2, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APE2, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PE3, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APE3, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PCIB, Package(){ + /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Func 4. */ + Package(){0x0003FFFF, 0, 0, 0x14 }, + Package(){0x0003FFFF, 1, 0, 0x15 }, + Package(){0x0003FFFF, 2, 0, 0x16 }, + Package(){0x0003FFFF, 3, 0, 0x17 }, + Package(){0x0004FFFF, 0, 0, 0x15 }, + Package(){0x0004FFFF, 1, 0, 0x16 }, + Package(){0x0004FFFF, 2, 0, 0x17 }, + Package(){0x0004FFFF, 3, 0, 0x14 }, + Package(){0x0005FFFF, 0, 0, 0x16 }, + Package(){0x0005FFFF, 1, 0, 0x17 }, + Package(){0x0005FFFF, 2, 0, 0x14 }, + Package(){0x0005FFFF, 3, 0, 0x15 }, + }) +} diff --git a/src/mainboard/pcengines/apu1/acpi/sata.asl b/src/mainboard/pcengines/apu1/acpi/sata.asl new file mode 100644 index 0000000..dcf6dec --- /dev/null +++ b/src/mainboard/pcengines/apu1/acpi/sata.asl @@ -0,0 +1,149 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00110000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + \_GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(\_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (\_SB.P0PR) { + if (LGreater(\_SB.P0IS,0)) { + sleep(32) + } + Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, \_SB.P0PR) + } + + if (\_SB.P1PR) { + if (LGreater(\_SB.P1IS,0)) { + sleep(32) + } + Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, \_SB.P1PR) + } + + if (\_SB.P2PR) { + if (LGreater(\_SB.P2IS,0)) { + sleep(32) + } + Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, \_SB.P2PR) + } + + if (\_SB.P3PR) { + if (LGreater(\_SB.P3IS,0)) { + sleep(32) + } + Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, \_SB.P3PR) + } + } +} diff --git a/src/mainboard/pcengines/apu1/acpi/sleep.asl b/src/mainboard/pcengines/apu1/acpi/sleep.asl new file mode 100644 index 0000000..5d0f8f0 --- /dev/null +++ b/src/mainboard/pcengines/apu1/acpi/sleep.asl @@ -0,0 +1,120 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Wake status package */ +Name(WKST,Package(){Zero, Zero}) + +/* +* \_PTS - Prepare to Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2, etc +* +* Exit: +* -none- +* +* The _PTS control method is executed at the beginning of the sleep process +* for S1-S5. The sleeping value is passed to the _PTS control method. This +* control method may be executed a relatively long time before entering the +* sleep state and the OS may abort the operation without notification to +* the ACPI driver. This method cannot modify the configuration or power +* state of any device in the system. +*/ +Method(\_PTS, 1) { + /* DBGO("\\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Don't allow PCIRST# to reset USB */ + if (LEqual(Arg0,3)){ + Store(0,URRE) + } + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(\_SB.SBRI, 0x13)) { + * Store(0,\_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) +} /* End Method(\_PTS) */ + +/* +* \_BFS OEM Back From Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* -none- +*/ +Method(\_BFS, 1) { + /* DBGO("\\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ +} + +/* +* \_WAK System Wake method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* Return package of 2 DWords +* Dword 1 - Status +* 0x00000000 wake succeeded +* 0x00000001 Wake was signaled but failed due to lack of power +* 0x00000002 Wake was signaled but failed due to thermal condition +* Dword 2 - Power Supply state +* if non-zero the effective S-state the power supply entered +*/ +Method(\_WAK, 1) { + /* DBGO("\\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + /* Re-enable HPET */ + Store(1,HPDE) + + /* Restore PCIRST# so it resets USB */ + if (LEqual(Arg0,3)){ + Store(1,URRE) + } + + /* Arbitrarily clear PciExpWakeStatus */ + Store(PWST, PWST) + + /* if(DeRefOf(Index(WKST,0))) { + * Store(0, Index(WKST,1)) + * } else { + * Store(Arg0, Index(WKST,1)) + * } + */ + Return(WKST) +} /* End Method(\_WAK) */ diff --git a/src/mainboard/pcengines/apu1/acpi/superio.asl b/src/mainboard/pcengines/apu1/acpi/superio.asl new file mode 100644 index 0000000..e042553 --- /dev/null +++ b/src/mainboard/pcengines/apu1/acpi/superio.asl @@ -0,0 +1,18 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* No Super I/O device or functionality yet */ diff --git a/src/mainboard/pcengines/apu1/acpi/thermal.asl b/src/mainboard/pcengines/apu1/acpi/thermal.asl new file mode 100644 index 0000000..2f50475 --- /dev/null +++ b/src/mainboard/pcengines/apu1/acpi/thermal.asl @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Thermal Zones have been #if 0 for a long time. + * Removing it for now because it doesn't seem to + * do anything when enabled anyway. + */ diff --git a/src/mainboard/pcengines/apu1/acpi/usb_oc.asl b/src/mainboard/pcengines/apu1/acpi/usb_oc.asl new file mode 100644 index 0000000..0429ac7 --- /dev/null +++ b/src/mainboard/pcengines/apu1/acpi/usb_oc.asl @@ -0,0 +1,174 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "usb.asl" + } +*/ + +/* USB overcurrent mapping pins. */ +Name(UOM0, 0) +Name(UOM1, 2) +Name(UOM2, 0) +Name(UOM3, 7) +Name(UOM4, 2) +Name(UOM5, 2) +Name(UOM6, 6) +Name(UOM7, 2) +Name(UOM8, 6) +Name(UOM9, 6) + +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (\_GPE) { + Method (_L13) { + UCOC() + if(LEqual(GPB0,PLC0)) { + Not(PLC0,PLC0) + Store(PLC0, \_SB.PT0D) + } + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (\_GPE) { + Method (_L14) { + UCOC() + if (LEqual(GPB1,PLC1)) { + Not(PLC1,PLC1) + Store(PLC1, \_SB.PT1D) + } + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (\_GPE) { + Method (_L15) { + UCOC() + if (LEqual(GPB2,PLC2)) { + Not(PLC2,PLC2) + Store(PLC2, \_SB.PT2D) + } + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (\_GPE) { + Method (_L16) { + UCOC() + if (LEqual(GPB3,PLC3)) { + Not(PLC3,PLC3) + Store(PLC3, \_SB.PT3D) + } + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (\_GPE) { + Method (_L19) { + UCOC() + if (LEqual(GPB4,PLC4)) { + Not(PLC4,PLC4) + Store(PLC4, \_SB.PT4D) + } + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +If (LLessEqual(UOM5,9)) { + Scope (\_GPE) { + Method (_L1A) { + UCOC() + if (LEqual(GPB5,PLC5)) { + Not(PLC5,PLC5) + Store(PLC5, \_SB.PT5D) + } + } + } +} + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (\_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + UCOC() + if (LEqual(GPB6,PLC6)) { + Not(PLC6,PLC6) + Store(PLC6, \_SB.PT6D) + } + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (\_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + UCOC() + if (LEqual(GPB7,PLC7)) { + Not(PLC7,PLC7) + Store(PLC7, \_SB.PT7D) + } + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (\_GPE) { + Method (_L17) { + if (LEqual(G8IS,PLC8)) { + Not(PLC8,PLC8) + Store(PLC8, \_SB.PT8D) + } + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (\_GPE) { + Method (_L0E) { + if (LEqual(G9IS,0)) { + Store(1,\_SB.PT9D) + } + } + } +} diff --git a/src/mainboard/pcengines/apu1/acpi_tables.c b/src/mainboard/pcengines/apu1/acpi_tables.c new file mode 100644 index 0000000..8f1b413 --- /dev/null +++ b/src/mainboard/pcengines/apu1/acpi_tables.c @@ -0,0 +1,57 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <northbridge/amd/agesa/agesawrapper.h> +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdfam14.h> + + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write SB800 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + CONFIG_MAX_CPUS, IO_APIC_ADDR, 0); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ + /* 1: LINT1 connect to NMI */ + + return current; +} diff --git a/src/mainboard/pcengines/apu1/board_info.txt b/src/mainboard/pcengines/apu1/board_info.txt new file mode 100644 index 0000000..85cb19a --- /dev/null +++ b/src/mainboard/pcengines/apu1/board_info.txt @@ -0,0 +1,5 @@ +Board name: DBFT1-00-EVAL-KT (Persimmon) +Category: eval +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/pcengines/apu1/buildOpts.c b/src/mainboard/pcengines/apu1/buildOpts.c new file mode 100644 index 0000000..9cf2a19 --- /dev/null +++ b/src/mainboard/pcengines/apu1/buildOpts.c @@ -0,0 +1,453 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * @file + * + * AMD User options selection for a Brazos platform solution system + * + * This file is placed in the user's platform directory and contains the + * build option selections desired for that platform. + * + * For Information about this file, see @ref platforminstall. + * + */ + +#include <stdlib.h> +#include "Filecode.h" +#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE + + +/* Select the cpu family. */ +#define INSTALL_FAMILY_10_SUPPORT FALSE +#define INSTALL_FAMILY_12_SUPPORT FALSE +#define INSTALL_FAMILY_14_SUPPORT TRUE +#define INSTALL_FAMILY_15_SUPPORT FALSE + +/* Select the cpu socket type. */ +#define INSTALL_G34_SOCKET_SUPPORT FALSE +#define INSTALL_C32_SOCKET_SUPPORT FALSE +#define INSTALL_S1G3_SOCKET_SUPPORT FALSE +#define INSTALL_S1G4_SOCKET_SUPPORT FALSE +#define INSTALL_ASB2_SOCKET_SUPPORT FALSE +#define INSTALL_FS1_SOCKET_SUPPORT FALSE +#define INSTALL_FM1_SOCKET_SUPPORT FALSE +#define INSTALL_FP1_SOCKET_SUPPORT FALSE +#define INSTALL_FT1_SOCKET_SUPPORT TRUE +#define INSTALL_AM3_SOCKET_SUPPORT FALSE + +/* + * Agesa optional capabilities selection. + * Uncomment and mark FALSE those features you wish to include in the build. + * Comment out or mark TRUE those features you want to REMOVE from the build. + */ + +#define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE +#define BLDOPT_REMOVE_FAMILY_12_SUPPORT TRUE +#define BLDOPT_REMOVE_FAMILY_14_SUPPORT FALSE +#define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE + +#define BLDOPT_REMOVE_AM3_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_ASB2_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_C32_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_FM1_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_FP1_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_FS1_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_FT1_SOCKET_SUPPORT FALSE +#define BLDOPT_REMOVE_G34_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_S1G3_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_S1G4_SOCKET_SUPPORT TRUE + +#define BLDOPT_REMOVE_UDIMMS_SUPPORT FALSE +#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_LRDIMMS_SUPPORT FALSE +#define BLDOPT_REMOVE_ECC_SUPPORT FALSE +//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE +#define BLDOPT_REMOVE_BANK_INTERLEAVE FALSE +#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE +#define BLDOPT_REMOVE_PARALLEL_TRAINING FALSE +#define BLDOPT_REMOVE_DQS_TRAINING FALSE +#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE +#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_ACPI_PSTATES FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_PPC FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_PCT FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_PSD FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_PSS FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_XPSS FALSE + #define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT FALSE +#define BLDOPT_REMOVE_SRAT FALSE +#define BLDOPT_REMOVE_SLIT FALSE +#define BLDOPT_REMOVE_WHEA FALSE +#define BLDOPT_REMOVE_DMI TRUE +#define BLDOPT_REMOVE_HT_ASSIST TRUE +#define BLDOPT_REMOVE_ATM_MODE TRUE +//#define BLDOPT_REMOVE_MSG_BASED_C1E TRUE +//#define BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT TRUE +#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT FALSE +//#define BLDOPT_REMOVE_C6_STATE TRUE +#define BLDOPT_REMOVE_GFX_RECOVERY TRUE +#define BLDOPT_REMOVE_EARLY_SAMPLES TRUE + +/* + * Agesa entry points used in this implementation. + */ +#define AGESA_ENTRY_INIT_RESET TRUE +#define AGESA_ENTRY_INIT_RECOVERY FALSE +#define AGESA_ENTRY_INIT_EARLY TRUE +#define AGESA_ENTRY_INIT_POST TRUE +#define AGESA_ENTRY_INIT_ENV TRUE +#define AGESA_ENTRY_INIT_MID TRUE +#define AGESA_ENTRY_INIT_LATE TRUE +#define AGESA_ENTRY_INIT_S3SAVE TRUE +#define AGESA_ENTRY_INIT_RESUME TRUE +#define AGESA_ENTRY_INIT_LATE_RESTORE TRUE +#define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE + +#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS +#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER + +#define BLDCFG_VRM_CURRENT_LIMIT 24000 +//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0 +#define BLDCFG_VRM_LOW_POWER_THRESHOLD 24000 +#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1 +#define BLDCFG_VRM_SLEW_RATE 5000 +//#define BLDCFG_VRM_NB_SLEW_RATE 5000 +//#define BLDCFG_VRM_ADDITIONAL_DELAY 0 +//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 +#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE +//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE FALSE +#define BLDCFG_VRM_INRUSH_CURRENT_LIMIT 6000 +//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 + +//#define BLDCFG_PROCESSOR_SCOPE_NAME0 'C' +//#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' +//#define BLDCFG_PROCESSOR_SCOPE_IN_SB FALSE +#define BLDCFG_PLAT_NUM_IO_APICS 3 +//#define BLDCFG_PLATFORM_C1E_MODE C1eModeDisabled +//#define BLDCFG_PLATFORM_C1E_OPDATA 0 +//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA1 0 +//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA2 0 +#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6 +#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x840 +#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x840 +//#define BLDCFG_PLATFORM_CPB_MODE CpbModeAuto +#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST +#define BLDCFG_AP_MTRR_SETTINGS_LIST &OntarioApMtrrSettingsList +#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE +//#define BLDCFG_STARTING_BUSNUM 0 +//#define BLDCFG_MAXIMUM_BUSNUM 0xf8 +//#define BLDCFG_ALLOCATED_BUSNUMS 0x20 +//#define BLDCFG_PLATFORM_DEEMPHASIS_LIST 0 +//#define BLDCFG_BUID_SWAP_LIST 0 +//#define BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST 0 +//#define BLDCFG_HTFABRIC_LIMITS_LIST 0 +//#define BLDCFG_HTCHAIN_LIMITS_LIST 0 +//#define BLDCFG_BUS_NUMBERS_LIST 0 +//#define BLDCFG_IGNORE_LINK_LIST 0 +//#define BLDCFG_LINK_SKIP_REGANG_LIST 0 +//#define BLDCFG_ADDITIONAL_TOPOLOGIES_LIST 0 +//#define BLDCFG_USE_HT_ASSIST TRUE +//#define BLDCFG_USE_ATM_MODE TRUE +//#define BLDCFG_PLATFORM_CONTROL_FLOW_MODE Nfcm +#define BLDCFG_S3_LATE_RESTORE TRUE +//#define BLDCFG_USE_32_BYTE_REFRESH FALSE +//#define BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY FALSE +//#define BLDCFG_PLATFORM_POWER_POLICY_MODE Performance +//#define BLDCFG_SET_HTCRC_SYNC_FLOOD FALSE +//#define BLDCFG_USE_UNIT_ID_CLUMPING FALSE +//#define BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP 0 +#define BLDCFG_CFG_GNB_HD_AUDIO FALSE +//#define BLDCFG_CFG_ABM_SUPPORT FALSE +//#define BLDCFG_CFG_DYNAMIC_REFRESH_RATE 0 +//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 0 +//#define BLDCFG_MEM_INIT_PSTATE 0 +//#define BLDCFG_AMD_PSTATE_CAP_VALUE 0 +#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1333_FREQUENCY +#define BLDCFG_MEMORY_MODE_UNGANGED TRUE +//#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE +//#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE +#define BLDCFG_MEMORY_LRDIMM_CAPABLE FALSE +#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE +#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE +#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING FALSE +#define BLDCFG_MEMORY_POWER_DOWN TRUE +#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT +//#define BLDCFG_ONLINE_SPARE FALSE +//#define BLDCFG_MEMORY_PARITY_ENABLE FALSE +#define BLDCFG_BANK_SWIZZLE TRUE +#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO +#define BLDCFG_MEMORY_CLOCK_SELECT DDR1333_FREQUENCY +#define BLDCFG_DQS_TRAINING_CONTROL TRUE +#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE +#define BLDCFG_USE_BURST_MODE FALSE +#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE +//#define BLDCFG_ENABLE_ECC_FEATURE TRUE +//#define BLDCFG_ECC_REDIRECTION FALSE +//#define BLDCFG_SCRUB_DRAM_RATE 0 +//#define BLDCFG_SCRUB_L2_RATE 0 +//#define BLDCFG_SCRUB_L3_RATE 0 +//#define BLDCFG_SCRUB_IC_RATE 0 +//#define BLDCFG_SCRUB_DC_RATE 0 +//#define BLDCFG_ECC_SYNC_FLOOD 0 +//#define BLDCFG_ECC_SYMBOL_SIZE 0 +//#define BLDCFG_1GB_ALIGN FALSE +#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO +#define BLDCFG_UMA_ALLOCATION_SIZE 0 +#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE +#define BLDCFG_UMA_ALIGNMENT NO_UMA_ALIGNED +#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000 +#define BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS 0xD0000000 + +/* + * Agesa configuration values selection. + * Uncomment and specify the value for the configuration options + * needed by the system. + */ +#include "AGESA.h" +#include "CommonReturns.h" + +/* The fixed MTRR values to be set after memory initialization. */ +CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] = +{ + { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000ull }, + { AMD_AP_MTRR_FIX4k_C0000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_C8000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_D0000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_D8000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_E0000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_E8000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_F0000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_F8000, 0x1E1E1E1E1E1E1E1Eull }, + { CPU_LIST_TERMINAL } +}; + +/* Include the files that instantiate the configuration definitions. */ + +#include "cpuRegisters.h" +#include "cpuFamRegisters.h" +#include "cpuFamilyTranslation.h" +#include "AdvancedApi.h" +#include "heapManager.h" +#include "CreateStruct.h" +#include "cpuFeatures.h" +#include "Table.h" +#include "cpuEarlyInit.h" +#include "cpuLateInit.h" +#include "GnbInterface.h" + +/***************************************************************************** + * Define the RELEASE VERSION string + * + * The Release Version string should identify the next planned release. + * When a branch is made in preparation for a release, the release manager + * should change/confirm that the branch version of this file contains the + * string matching the desired version for the release. The trunk version of + * the file should always contain a trailing 'X'. This will make sure that a + * development build from trunk will not be confused for a released version. + * The release manager will need to remove the trailing 'X' and update the + * version string as appropriate for the release. The trunk copy of this file + * should also be updated/incremented for the next expected version, + trailing 'X' + ****************************************************************************/ +// This is the delivery package title, "BrazosPI" +// This string MUST be exactly 8 characters long +#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} + +// This is the release version number of the AGESA component +// This string MUST be exactly 12 characters long +#define AGESA_VERSION_STRING {'V', '1', '.', '1', '.', '0', '.', '3', ' ', ' ', ' ', ' '} + +/* MEMORY_BUS_SPEED */ +#define DDR400_FREQUENCY 200 ///< DDR 400 +#define DDR533_FREQUENCY 266 ///< DDR 533 +#define DDR667_FREQUENCY 333 ///< DDR 667 +#define DDR800_FREQUENCY 400 ///< DDR 800 +#define DDR1066_FREQUENCY 533 ///< DDR 1066 +#define DDR1333_FREQUENCY 667 ///< DDR 1333 +#define DDR1600_FREQUENCY 800 ///< DDR 1600 +#define DDR1866_FREQUENCY 933 ///< DDR 1866 +#define UNSUPPORTED_DDR_FREQUENCY 934 ///< Highest limit of DDR frequency + +/* QUANDRANK_TYPE*/ +#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM +#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM + +/* USER_MEMORY_TIMING_MODE */ +#define TIMING_MODE_AUTO 0 ///< Use best rate possible +#define TIMING_MODE_LIMITED 1 ///< Set user top limit +#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed + +/* POWER_DOWN_MODE */ +#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode +#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode + +// The following definitions specify the default values for various parameters in which there are +// no clearly defined defaults to be used in the common file. The values below are based on product +// and BKDG content, please consult the AGESA Memory team for consultation. +#define DFLT_SCRUB_DRAM_RATE (0) +#define DFLT_SCRUB_L2_RATE (0) +#define DFLT_SCRUB_L3_RATE (0) +#define DFLT_SCRUB_IC_RATE (0) +#define DFLT_SCRUB_DC_RATE (0) +#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define DFLT_VRM_SLEW_RATE (5000) + +// Instantiate all solution relevant data. +#include "PlatformInstall.h" + +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + // + // The following macros are supported (use comma to separate macros): + // + // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) + // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. + // AGESA will base on this value to disable unused MemClk to save power. + // Example: + // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: + // Bit AM3/S1g3 pin name + // 0 M[B,A]_CLK_H/L[0] + // 1 M[B,A]_CLK_H/L[1] + // 2 M[B,A]_CLK_H/L[2] + // 3 M[B,A]_CLK_H/L[3] + // 4 M[B,A]_CLK_H/L[4] + // 5 M[B,A]_CLK_H/L[5] + // 6 M[B,A]_CLK_H/L[6] + // 7 M[B,A]_CLK_H/L[7] + // And platform has the following routing: + // CS0 M[B,A]_CLK_H/L[4] + // CS1 M[B,A]_CLK_H/L[2] + // CS2 M[B,A]_CLK_H/L[3] + // CS3 M[B,A]_CLK_H/L[5] + // Then platform can specify the following macro: + // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) + // + // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) + // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. + // AGESA will base on this value to tristate unused CKE to save power. + // + // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) + // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. + // AGESA will base on this value to tristate unused ODT pins to save power. + // + // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) + // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. + // AGESA will base on this value to tristate unused Chip select to save power. + // + // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) + // Specifies the number of DIMM slots per channel. + // + // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) + // Specifies the number of Chip selects per channel. + // + // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) + // Specifies the number of channels per socket. + // + // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) + // Specifies DDR bus speed of channel ChannelID on socket SocketID. + // + // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) + // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) + // + // WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, + // Byte6Seed, Byte7Seed, ByteEccSeed) + // Specifies the write leveling seed for a channel of a socket. + // + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), + PSO_END +}; + +/* + * These tables are optional and may be used to adjust memory timing settings + */ +#include "mm.h" +#include "mn.h" + +//DA Customer table +CONST UINT8 AGESA_MEM_TABLE_ON[][sizeof (MEM_TABLE_ALIAS)] = +{ + // Hardcoded Memory Training Values + + // The following macro should be used to override training values for your platform + // + // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20), + // + // NOTE: + // The following training hardcode values are example values that were taken from a tilapia motherboard + // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in + // the table and replace the byte lane values with your own. + // + // ------------------ BYTE LANES ---------------------- + // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC + // Write Data Timing + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1 + + // DQS Receiver Enable + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1 + + // Write DQS Delays + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1 + + // Read DQS Delays + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1 + //-------------------------------------------------------------------------------------------------------------------------------------------------- + // TABLE END + NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table +}; +CONST UINT8 SizeOfTableON = ARRAY_SIZE(AGESA_MEM_TABLE_ON); + +/* *************************************************************************** + * Optional User code to be included into the AGESA build + * These may be 32-bit call-out routines... + */ +//AGESA_STATUS +//AgesaReadSpd ( +// IN UINTN FcnData, +// IN OUT AGESA_READ_SPD_PARAMS *ReadSpd +// ) +//{ +// /* platform code to read an SPD... */ +// return Status; +//} diff --git a/src/mainboard/pcengines/apu1/cmos.layout b/src/mainboard/pcengines/apu1/cmos.layout new file mode 100644 index 0000000..ab65be0 --- /dev/null +++ b/src/mainboard/pcengines/apu1/cmos.layout @@ -0,0 +1,116 @@ +#***************************************************************************** +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#***************************************************************************** + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/pcengines/apu1/devicetree.cb b/src/mainboard/pcengines/apu1/devicetree.cb new file mode 100644 index 0000000..2f6bb14 --- /dev/null +++ b/src/mainboard/pcengines/apu1/devicetree.cb @@ -0,0 +1,89 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +chip northbridge/amd/agesa/family14/root_complex + device cpu_cluster 0 on + chip cpu/amd/agesa/family14 + device lapic 0 on end + end + end + device domain 0 on + subsystemid 0x1022 0x1510 inherit + chip northbridge/amd/agesa/family14 # CPU side of HT root complex +# device pci 18.0 on # northbridge + chip northbridge/amd/agesa/family14 # PCI side of HT root complex + device pci 0.0 on end # Root Complex + device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456] + device pci 4.0 on end # PCIE P2P bridge on-board NIC + device pci 5.0 off end # PCIE P2P bridge + device pci 6.0 on end # PCIE P2P bridge PCIe slot + device pci 7.0 off end # PCIE P2P bridge + device pci 8.0 off end # NB/SB Link P2P bridge + end # agesa northbridge + + chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus + device pci 11.0 on end # SATA + device pci 12.0 on end # OHCI USB 0-4 + device pci 12.2 on end # EHCI USB 0-4 + device pci 13.0 on end # OHCI USB 5-9 + device pci 13.2 on end # EHCI USB 5-9 + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + end # SM + device pci 14.1 on end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + end #LPC + device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} + device pci 14.5 off end # OHCI FS/LS USB + device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) + device pci 15.0 off end # PCIe PortA + device pci 15.1 off end # PCIe PortB + device pci 15.2 off end # PCIe PortC + device pci 15.3 off end # PCIe PortD + device pci 16.0 off end # OHCI USB 10-13 + device pci 16.2 off end # EHCI USB 10-13 + register "gpp_configuration" = "0" #4:0:0:0 (really need to disable all 4 somehow) + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + + end #southbridge/amd/cimx/sb800 +# end # device pci 18.0 +# These seem unnecessary + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end + device pci 18.6 on end + device pci 18.7 on end + + register "spdAddrLookup" = " + { + { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses + { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses + }" + + end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex + end #domain +end #northbridge/amd/agesa/family14/root_complex diff --git a/src/mainboard/pcengines/apu1/dsdt.asl b/src/mainboard/pcengines/apu1/dsdt.asl new file mode 100644 index 0000000..25520b2 --- /dev/null +++ b/src/mainboard/pcengines/apu1/dsdt.asl @@ -0,0 +1,69 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "AMD ", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + #include "acpi/mainboard.asl" + + #include <cpu/amd/agesa/family14/acpi/cpu.asl> + + #include "acpi/routing.asl" + + Scope(\_SB) { + /* global utility methods expected within the \_SB scope */ + #include <arch/x86/acpi/globutil.asl> + + Device(PCI0) { + + /* Describe the AMD Northbridge */ + #include <northbridge/amd/agesa/family14/acpi/northbridge.asl> + + /* Describe the AMD Fusion Controller Hub Southbridge */ + #include <southbridge/amd/cimx/sb800/acpi/fch.asl> + + /* Primary (and only) IDE channel */ + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "acpi/ide.asl" + } /* end IDEC */ + + } + } /* End Scope(_SB) */ + + /* Contains the supported sleep states for this chipset */ + #include <southbridge/amd/cimx/sb800/acpi/sleepstates.asl> + + /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */ + #include "acpi/sleep.asl" + + #include "acpi/gpe.asl" + #include <southbridge/amd/cimx/sb800/acpi/smbus.asl> + #include "acpi/thermal.asl" +} +/* End of ASL file */ diff --git a/src/mainboard/pcengines/apu1/irq_tables.c b/src/mainboard/pcengines/apu1/irq_tables.c new file mode 100644 index 0000000..12a64a8 --- /dev/null +++ b/src/mainboard/pcengines/apu1/irq_tables.c @@ -0,0 +1,115 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> +#include <cpu/amd/amdfam14.h> + + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + + /* pci bridge */ + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + + + + slot_num++; + + + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; + +} diff --git a/src/mainboard/pcengines/apu1/mainboard.c b/src/mainboard/pcengines/apu1/mainboard.c new file mode 100644 index 0000000..1096f05 --- /dev/null +++ b/src/mainboard/pcengines/apu1/mainboard.c @@ -0,0 +1,164 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <cpu/x86/msr.h> +#include <device/pci_def.h> +#include <southbridge/amd/amd_pci_util.h> +#include <southbridge/amd/cimx/cimx_util.h> +#include <arch/acpi.h> +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include <cpu/amd/agesa/s3_resume.h> +#include <cpu/amd/mtrr.h> +#include "SBPLATFORM.h" +#include <southbridge/amd/cimx/sb800/pci_devs.h> +#include <northbridge/amd/agesa/family14/pci_devs.h> + +void set_pcie_reset(void); +void set_pcie_dereset(void); + +/*********************************************************** + * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01. + * This table is responsible for physically routing the PIC and + * IOAPIC IRQs to the different PCI devices on the system. It + * is read and written via registers 0xC00/0xC01 as an + * Index/Data pair. These values are chipset and mainboard + * dependent and should be updated accordingly. + * + * These values are used by the PCI configuration space, + * MP Tables. TODO: Make ACPI use these values too. + * + * The Persimmon PCI INTA/B/C/D pins are connected to + * FCH pins INTE/F/G/H on the schematic so these need + * to be routed as well. + */ +static const u8 mainboard_picr_data[FCH_INT_TABLE_SIZE] = { + /* INTA# - INTH# */ + [0x00] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,0x0B, + /* Misc-nil,0,1,2, INT from Serial irq */ + [0x08] = 0x00,0xF0,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerfMon */ + [0x10] = 0x1F,0x1F,0x1F,0x0A,0x1F,0x1F,0x1F, + /* IMC INT0 - 5 */ + [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, + /* USB Devs 18/19/20/22 INTA-C */ + [0x30] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A, + /* IDE, SATA */ + [0x40] = 0x0B,0x0B, + /* GPPInt0 - 3 */ + [0x50] = 0x0A,0x0B,0x0A,0x0B +}; + +static const u8 mainboard_intr_data[FCH_INT_TABLE_SIZE] = { + /* INTA# - INTH# */ + [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, + /* Misc-nil,0,1,2, INT from Serial irq */ + [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerMon */ + [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F, + /* IMC INT0 - 5 */ + [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, + /* USB Devs 18/19/22/20 INTA-C */ + [0x30] = 0x12,0x11,0x12,0x11,0x12,0x11,0x12, + /* IDE, SATA */ + [0x40] = 0x11,0x13, + /* GPPInt0 - 3 */ + [0x50] = 0x10,0x11,0x12,0x13 +}; + +/* + * This table defines the index into the picr/intr_data + * tables for each device. Any enabled device and slot + * that uses hardware interrupts should have an entry + * in this table to define its index into the FCH + * PCI_INTR register 0xC00/0xC01. This index will define + * the interrupt that it should use. Putting PIRQ_A into + * the PIN A index for a device will tell that device to + * use PIC IRQ 10 if it uses PIN A for its hardware INT. + */ +/* + * Persimmon has PCI slot INTA/B/C/D connected to PIRQE/F/G/H + * but because PCI INT_PIN swizzling isnt implemented to match + * the IDSEL (dev 3) of the slot, the table is adjusted for the + * swizzle and INTA is connected to PIRQH so PINA/B/C/D on + * off-chip devices should get mapped to PIRQH/E/F/G. + */ +static const struct pirq_struct mainboard_pirq_data[] = { + /* {PCI_devfn, {PIN A, PIN B, PIN C, PIN D}}, */ + {GFX_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_NC, PIRQ_NC}}, /* VGA: 01.0 */ + {NB_PCIE_PORT1_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 04.0 */ + {NB_PCIE_PORT3_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* PCIe bdg: 06.0 */ + {SATA_DEVFN, {PIRQ_SATA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SATA: 11.0 */ + {OHCI1_DEVFN, {PIRQ_OHCI1, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI1: 12.0 */ + {EHCI1_DEVFN, {PIRQ_NC, PIRQ_EHCI1, PIRQ_NC, PIRQ_NC}}, /* EHCI1: 12.2 */ + {OHCI2_DEVFN, {PIRQ_OHCI2, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI2: 13.0 */ + {EHCI2_DEVFN, {PIRQ_NC, PIRQ_EHCI2, PIRQ_NC, PIRQ_NC}}, /* EHCI2: 13.2 */ + {SMBUS_DEVFN, {PIRQ_SMBUS, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SMBUS: 14.0 */ + {IDE_DEVFN, {PIRQ_NC, PIRQ_IDE, PIRQ_NC, PIRQ_NC}}, /* IDE: 14.1 */ + {HDA_DEVFN, {PIRQ_HDA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* HDA: 14.2 */ + {SB_PCI_PORT_DEVFN, {PIRQ_H, PIRQ_E, PIRQ_F, PIRQ_G}}, /* PCI bdg: 14.4 */ + {OHCI4_DEVFN, {PIRQ_NC, PIRQ_NC, PIRQ_OHCI4, PIRQ_NC}}, /* OHCI4: 14.5 */ + {OHCI3_DEVFN, {PIRQ_OHCI3, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI3: 16.0 */ + {EHCI3_DEVFN, {PIRQ_NC, PIRQ_EHCI3, PIRQ_NC, PIRQ_NC}}, /* EHCI3: 16.2 */ +}; + +/* PIRQ Setup */ +static void pirq_setup(void) +{ + pirq_data_ptr = mainboard_pirq_data; + pirq_data_size = sizeof(mainboard_pirq_data) / sizeof(struct pirq_struct); + intr_data_ptr = mainboard_intr_data; + picr_data_ptr = mainboard_picr_data; +} + +/** + * TODO + * SB CIMx callback + */ +void set_pcie_reset(void) +{ +} + +/** + * TODO + * mainboard specific SB CIMx callback + */ +void set_pcie_dereset(void) +{ +} + + +/********************************************** + * Enable the dedicated functions of the board. + **********************************************/ +static void mainboard_enable(device_t dev) +{ + printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); + + /* Initialize the PIRQ data structures for consumption */ + pirq_setup(); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/pcengines/apu1/mptable.c b/src/mainboard/pcengines/apu1/mptable.c new file mode 100644 index 0000000..1227d89 --- /dev/null +++ b/src/mainboard/pcengines/apu1/mptable.c @@ -0,0 +1,152 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdfam14.h> +#include <SBPLATFORM.h> +#include <southbridge/amd/amd_pci_util.h> +#include <drivers/generic/ioapic/chip.h> +#include <arch/ioapic.h> + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + + /* + * By the time this function gets called, the IOAPIC registers + * have been written so they can be read to get the correct + * APIC ID and Version + */ + u8 ioapic_id = (io_apic_read(IO_APIC_ADDR, 0x00) >> 24); + u8 ioapic_ver = (io_apic_read(IO_APIC_ADDR, 0x01) & 0xFF); + + /* Intialize the MP_Table */ + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + /* + * Type 0: Processor Entries: + * LAPIC ID, LAPIC Version, CPU Flags:EN/BP, + * CPU Signature (Stepping, Model, Family), + * Feature Flags + */ + smp_write_processors(mc); + + /* + * Type 1: Bus Entries: + * Bus ID, Bus Type + */ + mptable_write_buses(mc, NULL, &bus_isa); + + /* + * Type 2: I/O APICs: + * APIC ID, Version, APIC Flags:EN, Address + */ + smp_write_ioapic(mc, ioapic_id, ioapic_ver, IO_APIC_ADDR); + + /* + * Type 3: I/O Interrupt Table Entries: + * Int Type, Int Polarity, Int Level, Source Bus ID, + * Source Bus IRQ, Dest APIC ID, Dest PIN# + */ + mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); + + /* PCI interrupts are level triggered, and are + * associated with a specific bus/device/function tuple. + */ +#define PCI_INT(bus, dev, fn, pin) \ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), ioapic_id, (pin)) + + /* APU Internal Graphic Device */ + PCI_INT(0x0, 0x01, 0x0, intr_data_ptr[PIRQ_C]); + PCI_INT(0x0, 0x01, 0x1, intr_data_ptr[PIRQ_D]); + + /* SMBUS / ACPI */ + PCI_INT(0x0, 0x14, 0x0, intr_data_ptr[PIRQ_SMBUS]); + + /* Southbridge HD Audio */ + PCI_INT(0x0, 0x14, 0x2, intr_data_ptr[PIRQ_HDA]); + + /* LPC */ + PCI_INT(0x0, 0x14, 0x3, intr_data_ptr[PIRQ_C]); + + /* USB */ + PCI_INT(0x0, 0x12, 0x0, intr_data_ptr[PIRQ_OHCI1]); + PCI_INT(0x0, 0x12, 0x2, intr_data_ptr[PIRQ_EHCI1]); + PCI_INT(0x0, 0x13, 0x0, intr_data_ptr[PIRQ_OHCI2]); + PCI_INT(0x0, 0x13, 0x2, intr_data_ptr[PIRQ_EHCI2]); + PCI_INT(0x0, 0x14, 0x5, intr_data_ptr[PIRQ_OHCI4]); + + /* IDE */ + PCI_INT(0x0, 0x14, 0x1, intr_data_ptr[PIRQ_IDE]); + + /* SATA */ + PCI_INT(0x0, 0x11, 0x0, intr_data_ptr[PIRQ_SATA]); + + /* on board NIC & Slot PCIE */ + PCI_INT(0x1, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */ + PCI_INT(0x2, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */ + + /* PCI slots */ + device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); + if (dev && dev->enabled) { + u8 bus_pci = dev->link_list->secondary; + /* PCI_SLOT 0 */ + PCI_INT(bus_pci, 0x5, 0x0, intr_data_ptr[PIRQ_E]); /* INTA -> INTE */ + PCI_INT(bus_pci, 0x5, 0x1, intr_data_ptr[PIRQ_F]); /* INTB -> INTF */ + PCI_INT(bus_pci, 0x5, 0x2, intr_data_ptr[PIRQ_G]); /* INTC -> INTG */ + PCI_INT(bus_pci, 0x5, 0x3, intr_data_ptr[PIRQ_H]); /* INTD -> INTH */ + } + + /* PCIe PortA */ + PCI_INT(0x0, 0x15, 0x0, intr_data_ptr[PIRQ_E]); /* INTA -> INTE */ + /* PCIe PortB */ + PCI_INT(0x0, 0x15, 0x1, intr_data_ptr[PIRQ_F]); /* INTB -> INTF */ + /* PCIe PortC */ + PCI_INT(0x0, 0x15, 0x2, intr_data_ptr[PIRQ_G]); /* INTC -> INTG */ + /* PCIe PortD */ + PCI_INT(0x0, 0x15, 0x3, intr_data_ptr[PIRQ_H]); /* INTD -> INTH */ + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + + IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); /* ADDR, Enable Virtual Wire */ + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/pcengines/apu1/platform_cfg.h b/src/mainboard/pcengines/apu1/platform_cfg.h new file mode 100644 index 0000000..097c835 --- /dev/null +++ b/src/mainboard/pcengines/apu1/platform_cfg.h @@ -0,0 +1,229 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#ifndef _PLATFORM_CFG_H_ +#define _PLATFORM_CFG_H_ + +/** + * @def BIOS_SIZE + * BIOS_SIZE_{1,2,4,8,16}M + * + * In SB800, default ROM size is 1M Bytes, if your platform ROM + * bigger than 1M you have to set the ROM size outside CIMx module and + * before AGESA module get call. + */ +#ifndef BIOS_SIZE +#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1) +#endif /* BIOS_SIZE */ + +/** + * @def SPREAD_SPECTRUM + * @brief + * 0 - Disable Spread Spectrum function + * 1 - Enable Spread Spectrum function + */ +#define SPREAD_SPECTRUM 0 + +/** + * @def SB_HPET_TIMER + * @brief + * 0 - Disable hpet + * 1 - Enable hpet + */ +#define HPET_TIMER 1 + +/** + * @def USB_CONFIG + * @brief bit[0-6] used to control USB + * 0 - Disable + * 1 - Enable + * Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0 + * Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1 + * Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2 + * Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3 + * Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4 + * Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5 + * Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6 + */ +#define USB_CONFIG 0x7F + +/** + * @def PCI_CLOCK_CTRL + * @brief bit[0-4] used for PCI Slots Clock Control, + * 0 - disable + * 1 - enable + * PCI SLOT 0 define at BIT0 + * PCI SLOT 1 define at BIT1 + * PCI SLOT 2 define at BIT2 + * PCI SLOT 3 define at BIT3 + * PCI SLOT 4 define at BIT4 + */ +#define PCI_CLOCK_CTRL 0x07 + +/** + * @def SATA_CONTROLLER + * @brief INCHIP Sata Controller + */ +#define SATA_CONTROLLER CIMX_OPTION_ENABLED + +/** + * @def SATA_MODE + * @brief INCHIP Sata Controller Mode + * NOTE: DO NOT ALLOW SATA & IDE use same mode + */ +#define SATA_MODE CONFIG_SB800_SATA_MODE + +/** + * @brief INCHIP Sata IDE Controller Mode + */ +#define IDE_LEGACY_MODE 0 +#define IDE_NATIVE_MODE 1 + +/** + * @def SATA_IDE_MODE + * @brief INCHIP Sata IDE Controller Mode + * NOTE: DO NOT ALLOW SATA & IDE use same mode + */ +#define SATA_IDE_MODE IDE_LEGACY_MODE + +/** + * @def EXTERNAL_CLOCK + * @brief 00/10: Reference clock from crystal oscillator via + * PAD_XTALI and PAD_XTALO + * + * @def INTERNAL_CLOCK + * @brief 01/11: Reference clock from internal clock through + * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL + */ +#define EXTERNAL_CLOCK 0x00 +#define INTERNAL_CLOCK 0x01 + +/* NOTE: inagua have to using internal clock, + * otherwise can not detect sata drive + */ +#define SATA_CLOCK_SOURCE INTERNAL_CLOCK + +/** + * @def SATA_PORT_MULT_CAP_RESERVED + * @brief 1 ON, 0 0FF + */ +#define SATA_PORT_MULT_CAP_RESERVED 1 + + +/** + * @def AZALIA_AUTO + * @brief Detect Azalia controller automatically. + * + * @def AZALIA_DISABLE + * @brief Disable Azalia controller. + + * @def AZALIA_ENABLE + * @brief Enable Azalia controller. + */ +#define AZALIA_AUTO 0 +#define AZALIA_DISABLE 1 +#define AZALIA_ENABLE 2 + +/** + * @brief INCHIP HDA controller + */ +#define AZALIA_CONTROLLER AZALIA_AUTO + +/** + * @def AZALIA_PIN_CONFIG + * @brief + * 0 - disable + * 1 - enable + */ +#define AZALIA_PIN_CONFIG 1 + +/** + * @def AZALIA_SDIN_PIN + * @brief + * SDIN0 is define at BIT0 & BIT1 + * 00 - GPIO PIN + * 01 - Reserved + * 10 - As a Azalia SDIN pin + * SDIN1 is define at BIT2 & BIT3 + * SDIN2 is define at BIT4 & BIT5 + * SDIN3 is define at BIT6 & BIT7 + */ +//#define AZALIA_SDIN_PIN 0xAA +#define AZALIA_SDIN_PIN 0x2A + +/** + * @def GPP_CONTROLLER + */ +#define GPP_CONTROLLER CIMX_OPTION_ENABLED + +/** + * @def GPP_CFGMODE + * @brief GPP Link Configuration + * four possible configuration: + * GPP_CFGMODE_X4000 + * GPP_CFGMODE_X2200 + * GPP_CFGMODE_X2110 + * GPP_CFGMODE_X1111 + */ +#define GPP_CFGMODE GPP_CFGMODE_X1111 + +/** + * @def NB_SB_GEN2 + * 0 - Disable + * 1 - Enable + */ +#define NB_SB_GEN2 TRUE + +/** + * @def SB_GPP_GEN2 + * 0 - Disable + * 1 - Enable + */ +#define SB_GPP_GEN2 TRUE + +/** + * @def SB_GPP_UNHIDE_PORTS + * TRUE - ports visible always, even port empty + * FALSE - ports invisible if port empty + */ +#define SB_GPP_UNHIDE_PORTS FALSE + +/** + * @def GEC_CONFIG + * 0 - Enable + * 1 - Disable + */ +#define GEC_CONFIG 0 + +/* set up an ACPI preferred power management profile */ +/* from acpi.h + * PM_UNSPECIFIED = 0, + * PM_DESKTOP = 1, + * PM_MOBILE = 2, + * PM_WORKSTATION = 3, + * PM_ENTERPRISE_SERVER = 4, + * PM_SOHO_SERVER = 5, + * PM_APPLIANCE_PC = 6, + * PM_PERFORMANCE_SERVER = 7, + * PM_TABLET = 8 + */ +#define FADT_PM_PROFILE 1 + +#endif /* _PLATFORM_CFG_H_ */ diff --git a/src/mainboard/pcengines/apu1/romstage.c b/src/mainboard/pcengines/apu1/romstage.c new file mode 100644 index 0000000..d90a39d --- /dev/null +++ b/src/mainboard/pcengines/apu1/romstage.c @@ -0,0 +1,109 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <arch/stages.h> +#include <device/pnp_def.h> +#include <arch/cpu.h> +#include <cpu/x86/lapic.h> +#include <console/console.h> +#include <console/loglevel.h> +#include <cpu/x86/mtrr.h> +#include <cpu/amd/car.h> +#include <northbridge/amd/agesa/agesawrapper.h> +#include <cpu/x86/bist.h> +#include <cpu/x86/cache.h> +#include <sb_cimx.h> +#include "SBPLATFORM.h" +#include "cbmem.h" +#include <cpu/amd/mtrr.h> +#include <cpu/amd/agesa/s3_resume.h> + + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + u32 val; + + /* + * All cores: allow caching of flash chip code and data + * (there are no cache-as-ram reliability concerns with family 14h) + */ + __writemsr (0x20c, (0x0100000000ull - CACHE_ROM_SIZE) | 5); + __writemsr (0x20d, (0x1000000000ull - CACHE_ROM_SIZE) | 0x800); + + /* All cores: set pstate 0 (1600 MHz) early to save a few ms of boot time */ + __writemsr (0xc0010062, 0); + + amd_initmmio(); + + if (!cpu_init_detectedx && boot_cpu()) { + post_code(0x30); + sb_Poweron_Init(); + + post_code(0x31); + console_init(); + } + + /* Halt if there was a built in self test failure */ + post_code(0x34); + report_bist_failure(bist); + + /* Load MPB */ + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + post_code(0x37); + agesawrapper_amdinitreset(); + + post_code(0x39); + agesawrapper_amdinitearly(); + + int s3resume = acpi_is_wakeup_s3(); + if (!s3resume) { + post_code(0x40); + agesawrapper_amdinitpost(); + + post_code(0x42); + agesawrapper_amdinitenv(); + amd_initenv(); + + } else { /* S3 detect */ + printk(BIOS_INFO, "S3 detected\n"); + + post_code(0x60); + agesawrapper_amdinitresume(); + + agesawrapper_amds3laterestore(); + + post_code(0x61); + prepare_for_resume(); + } + + post_code(0x50); + copy_and_run(); + printk(BIOS_ERR, "Error: copy_and_run() returned!\n"); + + post_code(0x54); /* Should never see this post code. */ +}

1 0

New patch to review for coreboot: 4a73710 ectool: add write support
by Alexander Couzens 02 Feb '15

02 Feb '15

Alexander Couzens (lynxis(a)fe80.eu) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/8323 -gerrit commit 4a73710c9a0c14434cb3904d032b2b47ccf6aa88 Author: Alexander Couzens <lynxis(a)fe80.eu> Date: Mon Feb 2 08:51:30 2015 +0100 ectool: add write support Use `ectool -w <addr> -z <data>` to write into ec ram Change-Id: Id4aca045f6b7c2343be96ea474ee74033897b8b7 Signed-off-by: Alexander Couzens <lynxis(a)fe80.eu> --- util/ectool/ectool.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/util/ectool/ectool.c b/util/ectool/ectool.c index ab77282..4ceeaf8 100644 --- a/util/ectool/ectool.c +++ b/util/ectool/ectool.c @@ -24,6 +24,7 @@ #include <getopt.h> #include <sys/io.h> #include <ec.h> +#include <stdlib.h> #define ECTOOL_VERSION "0.1" @@ -51,6 +52,8 @@ void print_usage(const char *name) " -h | --help: print this help\n\n" " -V | --verbose: print debug information\n" " -i | --idx: print IDX RAM\n" + " -w <addr in hex> write to addr\n" + " -z <data in hex> write to data\n" "\n"); exit(1); } @@ -60,6 +63,8 @@ int verbose = 0, dump_idx = 0; int main(int argc, char *argv[]) { int i, opt, option_index = 0; + long write_data = -1; + long write_addr = -1; static struct option long_options[] = { {"version", 0, 0, 'v'}, @@ -69,7 +74,7 @@ int main(int argc, char *argv[]) {0, 0, 0, 0} }; - while ((opt = getopt_long(argc, argv, "vh?Vi", + while ((opt = getopt_long(argc, argv, "vh?Viw:z:", long_options, &option_index)) != EOF) { switch (opt) { case 'v': @@ -82,6 +87,12 @@ int main(int argc, char *argv[]) case 'i': dump_idx = 1; break; + case 'w': + write_addr = strtol(optarg , NULL, 16); + break; + case 'z': + write_data = strtol(optarg , NULL, 16); + break; case 'h': case '?': default: @@ -95,6 +106,12 @@ int main(int argc, char *argv[]) printf("You need to be root.\n"); exit(1); } + if (write_addr >= 0 && write_data >= 0) { + write_addr &= 0xff; + write_data &= 0xff; + printf("\nWriting ec %02lx = %02lx\n", write_addr & 0xff, write_data & 0xff); + ec_write(write_addr & 0xff, write_data & 0xff); + } printf("EC RAM:\n"); for (i = 0; i < 0x100; i++) {

1 0

Patch set updated for coreboot: 917208f cpu/amd (non-AGESA): Remove terminator from microcode blob
by Alexandru Gagniuc 02 Feb '15

02 Feb '15

Alexandru Gagniuc (mr.nuke.me(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4534 -gerrit commit 917208faee4017950690c14441d0446ab95a6d77 Author: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Date: Mon Dec 16 07:19:09 2013 +0200 cpu/amd (non-AGESA): Remove terminator from microcode blob Change-Id: I6370e971922dee5e8d476a883c5f0f32fbbc8911 Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Signed-off-by: Alexandru Gagniuc <mr.nuke.me(a)gmail.com> --- src/cpu/amd/microcode/microcode.c | 6 ++++-- src/cpu/amd/model_10xxx/microcode_blob.c | 6 ------ src/cpu/amd/model_fxx/microcode_blob.c | 6 ------ 3 files changed, 4 insertions(+), 14 deletions(-) diff --git a/src/cpu/amd/microcode/microcode.c b/src/cpu/amd/microcode/microcode.c index a5da75b..938f5f6 100644 --- a/src/cpu/amd/microcode/microcode.c +++ b/src/cpu/amd/microcode/microcode.c @@ -80,9 +80,11 @@ static void amd_update_microcode(const void *ucode, size_t ucode_len, uint32_t equivalent_processor_rev_id) { const struct microcode *m; - const void *c; + const uint8_t *c = ucode; + const uint8_t *ucode_end = (uint8_t*)ucode + ucode_len; - for(m = c = ucode; m->date_code; m = c) { + while (c <= (ucode_end - 2048)) { + m = (struct microcode *)c; if (m->processor_rev_id == equivalent_processor_rev_id) { apply_microcode_patch(m); break; diff --git a/src/cpu/amd/model_10xxx/microcode_blob.c b/src/cpu/amd/model_10xxx/microcode_blob.c index c2f93b5..524c484 100644 --- a/src/cpu/amd/model_10xxx/microcode_blob.c +++ b/src/cpu/amd/model_10xxx/microcode_blob.c @@ -6,10 +6,4 @@ unsigned char microcode[] __attribute__ ((aligned(16))) = { #include "mc_patch_010000b6.h" #include "mc_patch_010000bf.h" #include "mc_patch_010000c4.h" - - /* Dummy terminator */ - 0x0, 0x0, 0x0, 0x0, - 0x0, 0x0, 0x0, 0x0, - 0x0, 0x0, 0x0, 0x0, - 0x0, 0x0, 0x0, 0x0, }; diff --git a/src/cpu/amd/model_fxx/microcode_blob.c b/src/cpu/amd/model_fxx/microcode_blob.c index 1b6b979..ad6e3ca 100644 --- a/src/cpu/amd/model_fxx/microcode_blob.c +++ b/src/cpu/amd/model_fxx/microcode_blob.c @@ -4,10 +4,4 @@ unsigned char microcode[] __attribute__ ((aligned(16))) = { #include "microcode_rev_d.h" #include "microcode_rev_e.h" #endif - - /* Dummy terminator */ - 0x0, 0x0, 0x0, 0x0, - 0x0, 0x0, 0x0, 0x0, - 0x0, 0x0, 0x0, 0x0, - 0x0, 0x0, 0x0, 0x0, };

1 0

Patch set updated for coreboot: 6510669 cpu/amd (non-AGESA): Load microcode updates from CBFS
by Alexandru Gagniuc 02 Feb '15

02 Feb '15

Alexandru Gagniuc (mr.nuke.me(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4502 -gerrit commit 65106697445fc05f82247b8f7e109468fc6b7459 Author: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Date: Sun Dec 8 07:21:05 2013 +0200 cpu/amd (non-AGESA): Load microcode updates from CBFS Change-Id: Ic67856414ea2fea9a9eb95d72136cb05da9483fa Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Signed-off-by: Alexandru Gagniuc <mr.nuke.me(a)gmail.com> --- src/cpu/amd/microcode/microcode.c | 68 +++++++++++++++------- src/cpu/amd/model_10xxx/Kconfig | 1 + src/cpu/amd/model_10xxx/Makefile.inc | 2 + src/cpu/amd/model_10xxx/microcode_blob.c | 9 +++ src/cpu/amd/model_10xxx/update_microcode.c | 27 +-------- src/cpu/amd/model_fxx/Kconfig | 1 + src/cpu/amd/model_fxx/Makefile.inc | 2 + src/cpu/amd/model_fxx/microcode_blob.c | 13 +++++ src/cpu/amd/model_fxx/model_fxx_init.c | 2 +- src/cpu/amd/model_fxx/model_fxx_update_microcode.c | 27 ++------- src/include/cpu/amd/microcode.h | 5 +- 11 files changed, 83 insertions(+), 74 deletions(-) diff --git a/src/cpu/amd/microcode/microcode.c b/src/cpu/amd/microcode/microcode.c index cdc6e4a..a5da75b 100644 --- a/src/cpu/amd/microcode/microcode.c +++ b/src/cpu/amd/microcode/microcode.c @@ -21,6 +21,10 @@ #include <console/console.h> #include <cpu/x86/msr.h> #include <cpu/amd/microcode.h> +#include <cbfs.h> + +#define UCODE_DEBUG(fmt, args...) \ + do { printk(BIOS_DEBUG, "[microcode] "fmt, ##args); } while(0) struct microcode { u32 date_code; @@ -51,40 +55,60 @@ struct microcode { u8 x86_code_entry[191]; }; -void amd_update_microcode(void *microcode_updates, u32 equivalent_processor_rev_id) +static void apply_microcode_patch(const struct microcode *m) { - u32 patch_id, new_patch_id; - struct microcode *m; - char *c; + uint32_t new_patch_id; msr_t msr; - msr = rdmsr(0x8b); - patch_id = msr.lo; - - printk(BIOS_DEBUG, "microcode: equivalent rev id = 0x%04x, current patch id = 0x%08x\n", equivalent_processor_rev_id, patch_id); + /* apply patch */ + msr.hi = 0; + msr.lo = (uint32_t)m; - m = microcode_updates; + wrmsr(0xc0010020, msr); - for(c = microcode_updates; m->date_code; m = (struct microcode *)c) { - - if (m->processor_rev_id == equivalent_processor_rev_id) { - //apply patch + UCODE_DEBUG("patch id to apply = 0x%08x\n", m->patch_id); - msr.hi = 0; - msr.lo = (u32)m; - - wrmsr(0xc0010020, msr); + /* read the patch_id again */ + msr = rdmsr(0x8b); + new_patch_id = msr.lo; - printk(BIOS_DEBUG, "microcode: patch id to apply = 0x%08x\n", m->patch_id); + UCODE_DEBUG("updated to patch id = 0x%08x %s\n", new_patch_id , + (new_patch_id == m->patch_id) ? "success" : "fail"); +} - //read the patch_id again - msr = rdmsr(0x8b); - new_patch_id = msr.lo; +static void amd_update_microcode(const void *ucode, size_t ucode_len, + uint32_t equivalent_processor_rev_id) +{ + const struct microcode *m; + const void *c; - printk(BIOS_DEBUG, "microcode: updated to patch id = 0x%08x %s\n", new_patch_id , (new_patch_id == m->patch_id)?" success\n":" fail\n" ); + for(m = c = ucode; m->date_code; m = c) { + if (m->processor_rev_id == equivalent_processor_rev_id) { + apply_microcode_patch(m); break; } c += 2048; } +} + +#define MICROCODE_CBFS_FILE "cpu_microcode_blob.bin" + +void amd_update_microcode_from_cbfs(u32 equivalent_processor_rev_id) +{ + const void *ucode; + size_t ucode_len; + + if (equivalent_processor_rev_id == 0) { + UCODE_DEBUG("rev id not found. Skipping microcode patch!\n"); + return; + } + + ucode = cbfs_get_file_content(CBFS_DEFAULT_MEDIA, MICROCODE_CBFS_FILE, + CBFS_TYPE_MICROCODE, &ucode_len); + if (!ucode) { + UCODE_DEBUG("microcode file not found. Skipping updates.\n"); + return; + } + amd_update_microcode(ucode, ucode_len, equivalent_processor_rev_id); } diff --git a/src/cpu/amd/model_10xxx/Kconfig b/src/cpu/amd/model_10xxx/Kconfig index 09c7ec7..1b79eb0 100644 --- a/src/cpu/amd/model_10xxx/Kconfig +++ b/src/cpu/amd/model_10xxx/Kconfig @@ -9,6 +9,7 @@ config CPU_AMD_MODEL_10XXX select MMCONF_SUPPORT_DEFAULT select TSC_SYNC_LFENCE select UDELAY_LAPIC + select SUPPORT_CPU_UCODE_IN_CBFS if CPU_AMD_MODEL_10XXX diff --git a/src/cpu/amd/model_10xxx/Makefile.inc b/src/cpu/amd/model_10xxx/Makefile.inc index 2f04762..f5cf375 100644 --- a/src/cpu/amd/model_10xxx/Makefile.inc +++ b/src/cpu/amd/model_10xxx/Makefile.inc @@ -4,3 +4,5 @@ ramstage-y += processor_name.c romstage-y += update_microcode.c ramstage-$(CONFIG_HAVE_ACPI_TABLES) += powernow_acpi.c + +cpu_microcode-$(CONFIG_CPU_MICROCODE_CBFS_GENERATE) += microcode_blob.c diff --git a/src/cpu/amd/model_10xxx/microcode_blob.c b/src/cpu/amd/model_10xxx/microcode_blob.c new file mode 100644 index 0000000..78eae36 --- /dev/null +++ b/src/cpu/amd/model_10xxx/microcode_blob.c @@ -0,0 +1,9 @@ +unsigned char microcode[] __attribute__ ((aligned(16))) = { +#include CONFIG_AMD_UCODE_PATCH_FILE + + /* Dummy terminator */ + 0x0, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, +}; diff --git a/src/cpu/amd/model_10xxx/update_microcode.c b/src/cpu/amd/model_10xxx/update_microcode.c index 3cdf978..8dcd90d 100644 --- a/src/cpu/amd/model_10xxx/update_microcode.c +++ b/src/cpu/amd/model_10xxx/update_microcode.c @@ -19,13 +19,8 @@ */ #include <stdint.h> -#include <console/console.h> #include <cpu/amd/microcode.h> -static const u8 microcode_updates[] __attribute__ ((aligned(16))) = { - -#ifdef __PRE_RAM__ - /* From the Revision Guide : * Equivalent Processor Table for AMD Family 10h Processors * @@ -47,16 +42,6 @@ static const u8 microcode_updates[] __attribute__ ((aligned(16))) = { * 00100FA0h (PH-E0) 10A0h 010000bfh */ -#include CONFIG_AMD_UCODE_PATCH_FILE - -#endif - /* Dummy terminator */ - 0x0, 0x0, 0x0, 0x0, - 0x0, 0x0, 0x0, 0x0, - 0x0, 0x0, 0x0, 0x0, - 0x0, 0x0, 0x0, 0x0, -}; - struct id_mapping { uint32_t orig_id; uint16_t new_id; @@ -101,14 +86,6 @@ static u16 get_equivalent_processor_rev_id(u32 orig_id) { void update_microcode(u32 cpu_deviceid) { - u32 equivalent_processor_rev_id; - - /* Update the microcode */ - equivalent_processor_rev_id = get_equivalent_processor_rev_id(cpu_deviceid ); - if (equivalent_processor_rev_id != 0) { - amd_update_microcode((void *) microcode_updates, equivalent_processor_rev_id); - } else { - printk(BIOS_DEBUG, "microcode: rev id not found. Skipping microcode patch!\n"); - } - + u32 equivalent_processor_rev_id = get_equivalent_processor_rev_id(cpu_deviceid); + amd_update_microcode_from_cbfs(equivalent_processor_rev_id); } diff --git a/src/cpu/amd/model_fxx/Kconfig b/src/cpu/amd/model_fxx/Kconfig index bdcf5bb..9ee2bf7 100644 --- a/src/cpu/amd/model_fxx/Kconfig +++ b/src/cpu/amd/model_fxx/Kconfig @@ -9,6 +9,7 @@ config CPU_AMD_MODEL_FXX select SSE2 select TSC_SYNC_LFENCE select UDELAY_LAPIC + select SUPPORT_CPU_UCODE_IN_CBFS if CPU_AMD_MODEL_FXX config UDELAY_IO diff --git a/src/cpu/amd/model_fxx/Makefile.inc b/src/cpu/amd/model_fxx/Makefile.inc index cf4ac21..19a6255 100644 --- a/src/cpu/amd/model_fxx/Makefile.inc +++ b/src/cpu/amd/model_fxx/Makefile.inc @@ -5,3 +5,5 @@ ramstage-y += model_fxx_init.c ramstage-y += model_fxx_update_microcode.c ramstage-y += processor_name.c ramstage-$(CONFIG_HAVE_ACPI_TABLES) += powernow_acpi.c + +cpu_microcode-$(CONFIG_CPU_MICROCODE_CBFS_GENERATE) += microcode_blob.c diff --git a/src/cpu/amd/model_fxx/microcode_blob.c b/src/cpu/amd/model_fxx/microcode_blob.c new file mode 100644 index 0000000..1b6b979 --- /dev/null +++ b/src/cpu/amd/model_fxx/microcode_blob.c @@ -0,0 +1,13 @@ +unsigned char microcode[] __attribute__ ((aligned(16))) = { +#if !CONFIG_K8_REV_F_SUPPORT + #include "microcode_rev_c.h" + #include "microcode_rev_d.h" + #include "microcode_rev_e.h" +#endif + + /* Dummy terminator */ + 0x0, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, +}; diff --git a/src/cpu/amd/model_fxx/model_fxx_init.c b/src/cpu/amd/model_fxx/model_fxx_init.c index 260e83e..33226d4 100644 --- a/src/cpu/amd/model_fxx/model_fxx_init.c +++ b/src/cpu/amd/model_fxx/model_fxx_init.c @@ -468,7 +468,7 @@ static void model_fxx_init(device_t dev) x86_mtrr_check(); /* Update the microcode */ - model_fxx_update_microcode(dev->device); + update_microcode(dev->device); disable_cache(); diff --git a/src/cpu/amd/model_fxx/model_fxx_update_microcode.c b/src/cpu/amd/model_fxx/model_fxx_update_microcode.c index af10ce0..ed67349 100644 --- a/src/cpu/amd/model_fxx/model_fxx_update_microcode.c +++ b/src/cpu/amd/model_fxx/model_fxx_update_microcode.c @@ -23,24 +23,6 @@ #include <console/console.h> #include <cpu/amd/microcode.h> -static uint8_t microcode_updates[] __attribute__ ((aligned(16))) = { - -#if !CONFIG_K8_REV_F_SUPPORT - #include "microcode_rev_c.h" - #include "microcode_rev_d.h" - #include "microcode_rev_e.h" -#endif - -#if CONFIG_K8_REV_F_SUPPORT -// #include "microcode_rev_f.h" -#endif - /* Dummy terminator */ - 0x0, 0x0, 0x0, 0x0, - 0x0, 0x0, 0x0, 0x0, - 0x0, 0x0, 0x0, 0x0, - 0x0, 0x0, 0x0, 0x0, -}; - struct id_mapping { uint32_t orig_id; uint16_t new_id; @@ -95,12 +77,11 @@ static u16 get_equivalent_processor_rev_id(u32 orig_id) { return new_id; } -void model_fxx_update_microcode(unsigned cpu_deviceid) +void update_microcode(uint32_t cpu_deviceid) { - unsigned equivalent_processor_rev_id; + uint32_t equivalent_rev_id; /* Update the microcode */ - equivalent_processor_rev_id = get_equivalent_processor_rev_id(cpu_deviceid ); - if(equivalent_processor_rev_id != 0) - amd_update_microcode(microcode_updates, equivalent_processor_rev_id); + equivalent_rev_id = get_equivalent_processor_rev_id(cpu_deviceid); + amd_update_microcode_from_cbfs(equivalent_rev_id); } diff --git a/src/include/cpu/amd/microcode.h b/src/include/cpu/amd/microcode.h index 3485b6f..5ac04e9 100644 --- a/src/include/cpu/amd/microcode.h +++ b/src/include/cpu/amd/microcode.h @@ -1,9 +1,8 @@ #ifndef CPU_AMD_MICROCODE_H #define CPU_AMD_MICROCODE_H -void amd_update_microcode(void *microcode_updates, unsigned processor_rev_id); -void model_fxx_update_microcode(unsigned cpu_deviceid); -void update_microcode(u32 processor_rev_id); +void update_microcode(u32 cpu_deviceid); +void amd_update_microcode_from_cbfs(u32 equivalent_processor_rev_id); #endif /* CPU_AMD_MICROCODE_H */

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit February 2015