Kyösti Mälkki (kyosti.malkki@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/8328
-gerrit
commit 2464d14624b67701b90c874bd5479900bc1765df Author: Kyösti Mälkki kyosti.malkki@gmail.com Date: Sat Jan 17 18:08:40 2015 +0200
pcengines/apu1: Fix and cleanup devicetree
Change gpp_configuration to GPP_CFGMODE_X1111 (was X4000), this is done to only advertise x1 lanes for PCIe link 0:15.0.
Remove functions 0:12.1 and 0:13.1 that do not exist in the hardware.
Disable 0:14.1 IDE controller, as it would only be used with SATA ports 4 and 5 that are not populated with connectors in the hardware.
Disable 0:14.2 HD audio, as it is not implemented in the hardware
Disable 0:14.4 PCI-to-PCI bridge, as no PCI slots are implemented and some pins are used for GPIO in the hardware. Remove related IRQ entries for the bus that does not exist from MP tables.
Disable 0:14.5 OHCI controller, as ports behind this USB1.1 -only controller are not populated in the hardware.
Fix some alignment and whitespace.
To my knowledge these changes are not included with SAGE release pcengines.apu_139_osp.tar.gz, but that tarball does not contain either devicetree.cb or a pre-compiled static.c file so I cannot tell for sure.
Change-Id: Idcb8e76645fce7e89a37ff7007531b668f472131 Signed-off-by: Kyösti Mälkki kyosti.malkki@gmail.com --- src/mainboard/pcengines/apu1/devicetree.cb | 67 ++++++++++++++---------------- src/mainboard/pcengines/apu1/mptable.c | 11 ----- 2 files changed, 32 insertions(+), 46 deletions(-)
diff --git a/src/mainboard/pcengines/apu1/devicetree.cb b/src/mainboard/pcengines/apu1/devicetree.cb index 5f6f9c9..3c0b795 100644 --- a/src/mainboard/pcengines/apu1/devicetree.cb +++ b/src/mainboard/pcengines/apu1/devicetree.cb @@ -26,29 +26,26 @@ chip northbridge/amd/agesa/family14/root_complex device domain 0 on subsystemid 0x1022 0x1510 inherit chip northbridge/amd/agesa/family14 # CPU side of HT root complex -# device pci 18.0 on # northbridge - chip northbridge/amd/agesa/family14 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 1.0 off end # Internal Graphics P2P bridge 0x980[2456] - device pci 4.0 on end # PCIE P2P bridge on-board NIC - device pci 5.0 on end # PCIE P2P bridge - device pci 6.0 on end # PCIE P2P bridge PCIe slot - device pci 7.0 on end # PCIE P2P bridge - device pci 8.0 on end # NB/SB Link P2P bridge - end # agesa northbridge +# device pci 18.0 on # northbridge + chip northbridge/amd/agesa/family14 # PCI side of HT root complex + device pci 0.0 on end # Root Complex + device pci 1.0 off end # Internal Graphics P2P bridge 0x980[2456] + device pci 4.0 on end # PCIE P2P bridge on-board NIC + device pci 5.0 on end # PCIE P2P bridge + device pci 6.0 on end # PCIE P2P bridge PCIe slot + device pci 7.0 on end # PCIE P2P bridge + device pci 8.0 on end # NB/SB Link P2P bridge + end # agesa northbridge
- chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # OHCI USB 0-4 - device pci 12.1 on end # OHCI USB 0-4 - device pci 12.2 on end # EHCI USB 0-4 - device pci 13.0 on end # OHCI USB 5-9 - device pci 13.1 on end # OHCI USB 5-9 - device pci 13.2 on end # EHCI USB 5-9 - device pci 14.0 on # SM - end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 + chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus + device pci 11.0 on end # SATA + device pci 12.0 on end # OHCI USB 0-4 + device pci 12.2 on end # EHCI USB 0-4 + device pci 13.0 on end # OHCI USB 5-9 + device pci 13.2 on end # EHCI USB 5-9 + device pci 14.0 on end # SMbus + device pci 14.1 off end # IDE 0x439c + device pci 14.2 off end # HDA 0x4383 device pci 14.3 on # LPC 0x439d chip superio/nuvoton/nct5104d register "irq_trigger_type" = "0" @@ -76,19 +73,19 @@ chip northbridge/amd/agesa/family14/root_complex device pnp 2e.607 off end device pnp 2e.e off end end - end #LPC - device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} - device pci 14.5 on end # OHCI FS/LS USB - #device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) - device pci 15.0 on end # PCIe PortA - device pci 15.1 off end # PCIe PortB - device pci 15.2 off end # PCIe PortC - device pci 15.3 off end # PCIe PortD - device pci 16.0 on end # OHCI USB 10-13 - device pci 16.2 on end # EHCI USB 10-13 - register "gpp_configuration" = "0" - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/cimx/sb800 + end #LPC + device pci 14.4 off end # PCIB 0x4384 + device pci 14.5 off end # OHCI FS/LS USB + #device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) + device pci 15.0 on end # PCIe PortA + device pci 15.1 off end # PCIe PortB + device pci 15.2 off end # PCIe PortC + device pci 15.3 off end # PCIe PortD + device pci 16.0 on end # OHCI USB 10-13 + device pci 16.2 on end # EHCI USB 10-13 + register "gpp_configuration" = "4" # GPP_CFGMODE_X1111 + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + end #southbridge/amd/cimx/sb800 # end # device pci 18.0 # These seem unnecessary device pci 18.0 on end diff --git a/src/mainboard/pcengines/apu1/mptable.c b/src/mainboard/pcengines/apu1/mptable.c index 4686d62..c0553b4 100644 --- a/src/mainboard/pcengines/apu1/mptable.c +++ b/src/mainboard/pcengines/apu1/mptable.c @@ -114,17 +114,6 @@ static void *smp_write_config_table(void *v) PCI_INT(0x3, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */ PCI_INT(0x4, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */
- /* PCI slots */ - device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); - if (dev && dev->enabled) { - u8 bus_pci = dev->link_list->secondary; - /* PCI_SLOT 0 */ - PCI_INT(bus_pci, 0x5, 0x0, intr_data_ptr[PIRQ_E]); /* INTA -> INTE */ - PCI_INT(bus_pci, 0x5, 0x1, intr_data_ptr[PIRQ_F]); /* INTB -> INTF */ - PCI_INT(bus_pci, 0x5, 0x2, intr_data_ptr[PIRQ_G]); /* INTC -> INTG */ - PCI_INT(bus_pci, 0x5, 0x3, intr_data_ptr[PIRQ_H]); /* INTD -> INTH */ - } - /* PCIe PortA */ PCI_INT(0x0, 0x15, 0x0, intr_data_ptr[PIRQ_E]); /* INTA -> INTE */ /* PCIe PortB */
-
Kyösti Mälkki