coreboot-gerrit November 2015

coreboot-gerrit@coreboot.org

1 participants
1544 discussions

Patch set updated for coreboot: [REMOVAL] digitallogic/adl855pc
by Stefan Reinauer 10 Nov '15

10 Nov '15

Stefan Reinauer (stefan.reinauer(a)coreboot.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12369 -gerrit commit b80550d151a8e110c5930adbc5cb891684464142 Author: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Date: Tue Nov 10 11:20:54 2015 -0800 [REMOVAL] digitallogic/adl855pc As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: I5b0fb633b7611e2a69aeb33cd31ca8fd4a83592c Signed-off-by: Stefan Reinauer <stefan.reinauer(a)coreboot.org> --- src/mainboard/digitallogic/adl855pc/Kconfig | 25 --------- src/mainboard/digitallogic/adl855pc/Kconfig.name | 2 - src/mainboard/digitallogic/adl855pc/board_info.txt | 1 - src/mainboard/digitallogic/adl855pc/cmos.layout | 36 ------------- src/mainboard/digitallogic/adl855pc/devicetree.cb | 56 ------------------- src/mainboard/digitallogic/adl855pc/irq_tables.c | 29 ---------- src/mainboard/digitallogic/adl855pc/romstage.c | 63 ---------------------- 7 files changed, 212 deletions(-) diff --git a/src/mainboard/digitallogic/adl855pc/Kconfig b/src/mainboard/digitallogic/adl855pc/Kconfig deleted file mode 100644 index d8cb4b2..0000000 --- a/src/mainboard/digitallogic/adl855pc/Kconfig +++ /dev/null @@ -1,25 +0,0 @@ -if BOARD_DIGITALLOGIC_ADL855PC - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SOCKET_MPGA479M - select NORTHBRIDGE_INTEL_I855 - select SOUTHBRIDGE_INTEL_I82801DX - select SUPERIO_WINBOND_W83627HF - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select BOARD_ROMSIZE_KB_1024 - -config MAINBOARD_DIR - string - default digitallogic/adl855pc - -config MAINBOARD_PART_NUMBER - string - default "smartModule855" - -config IRQ_SLOT_COUNT - int - default 5 - -endif # BOARD_DIGITALLOGIC_ADL855PC diff --git a/src/mainboard/digitallogic/adl855pc/Kconfig.name b/src/mainboard/digitallogic/adl855pc/Kconfig.name deleted file mode 100644 index 70898e2..0000000 --- a/src/mainboard/digitallogic/adl855pc/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_DIGITALLOGIC_ADL855PC - bool "smartModule855" diff --git a/src/mainboard/digitallogic/adl855pc/board_info.txt b/src/mainboard/digitallogic/adl855pc/board_info.txt deleted file mode 100644 index 7680e6f..0000000 --- a/src/mainboard/digitallogic/adl855pc/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: half diff --git a/src/mainboard/digitallogic/adl855pc/cmos.layout b/src/mainboard/digitallogic/adl855pc/cmos.layout deleted file mode 100644 index 6de5ab6..0000000 --- a/src/mainboard/digitallogic/adl855pc/cmos.layout +++ /dev/null @@ -1,36 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -456 1 e 1 ECC_memory -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/digitallogic/adl855pc/devicetree.cb b/src/mainboard/digitallogic/adl855pc/devicetree.cb deleted file mode 100644 index 3a9603b..0000000 --- a/src/mainboard/digitallogic/adl855pc/devicetree.cb +++ /dev/null @@ -1,56 +0,0 @@ -chip northbridge/intel/i855 - device domain 0 on - device pci 0.0 on end - device pci 1.0 on end - chip southbridge/intel/i82801dx -# pci 11.0 on end -# pci 11.1 on end -# pci 11.2 on end -# pci 11.3 on end -# pci 11.4 on end -# pci 11.5 on end -# pci 11.6 on end -# pci 12.0 on end - register "enable_usb" = "0" - register "enable_native_ide" = "0" - chip superio/winbond/w83627hf # link 1 - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off end # CIR - device pnp 2e.7 off end # GAME_MIDI_GIPO1 - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - end - end - end - end - device cpu_cluster 0 on - chip cpu/intel/socket_mPGA479M - device lapic 0 on end - end - end -end diff --git a/src/mainboard/digitallogic/adl855pc/irq_tables.c b/src/mainboard/digitallogic/adl855pc/irq_tables.c deleted file mode 100644 index 5cbee86..0000000 --- a/src/mainboard/digitallogic/adl855pc/irq_tables.c +++ /dev/null @@ -1,29 +0,0 @@ -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0, /* Where the interrupt router lies (bus) */ - 0x88, /* Where the interrupt router lies (dev) */ - 0x1c20, /* IRQs devoted exclusively to PCI usage */ - 0x1106, /* Vendor */ - 0x8231, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x5e, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* 8231 ethernet */ - {0,0x90, {{0x1, 0xdeb8}, {0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}}, 0x1, 0}, - /* 8231 internal */ - {0,0x88, {{0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}}, 0x2, 0}, - /* PCI slot */ - {0,0xa0, {{0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}, {0x2, 0xdeb8}}, 0, 0}, - {0,0x50, {{0x4, 0xdeb8}, {0x3, 0xdeb8}, {0x2, 0xdeb8}, {0x1, 0xdeb8}}, 0x3, 0}, - {0,0x98, {{0x4, 0xdeb8}, {0x3, 0xdeb8}, {0x2, 0xdeb8}, {0x1, 0xdeb8}}, 0x4, 0}, - } -}; -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/digitallogic/adl855pc/romstage.c b/src/mainboard/digitallogic/adl855pc/romstage.c deleted file mode 100644 index 73fef71..0000000 --- a/src/mainboard/digitallogic/adl855pc/romstage.c +++ /dev/null @@ -1,63 +0,0 @@ -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <stdlib.h> -#include <lib.h> -#include "drivers/pc80/udelay_io.c" -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <southbridge/intel/i82801dx/i82801dx.h> -#include <northbridge/intel/i855/raminit.h> -#include "northbridge/intel/i855/debug.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include <cpu/x86/bist.h> -#include <spd.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/intel/i855/raminit.c" -#include "northbridge/intel/i855/reset_test.c" - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - if (bist == 0) { -#if 0 - enable_lapic(); - init_timer(); -#endif - } - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - -#if 0 - print_pci_devices(); -#endif - - if (!bios_reset_detected()) { - enable_smbus(); -#if 0 - dump_spd_registers(); - dump_smbus_registers(); -#endif - sdram_set_registers(); - sdram_set_spd_registers(); - sdram_enable(); - } - -#if 0 - dump_pci_devices(); - dump_pci_device(PCI_DEV(0, 0, 0)); -#endif -}

1 0

Patch set updated for coreboot: [REMOVAL] tyan/s4880
by Stefan Reinauer 10 Nov '15

10 Nov '15

Stefan Reinauer (stefan.reinauer(a)coreboot.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12384 -gerrit commit 7c82beac3a4833665ccd940a1fd4edcc2d10b273 Author: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Date: Tue Nov 10 11:35:08 2015 -0800 [REMOVAL] tyan/s4880 As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: I41d1f9eac2f4c37bec4d046a68f3f1cf95b51703 Signed-off-by: Stefan Reinauer <stefan.reinauer(a)coreboot.org> --- src/mainboard/tyan/s4880/Kconfig | 57 ------- src/mainboard/tyan/s4880/Kconfig.name | 2 - src/mainboard/tyan/s4880/board_info.txt | 4 - src/mainboard/tyan/s4880/cmos.layout | 60 -------- src/mainboard/tyan/s4880/devicetree.cb | 98 ------------ src/mainboard/tyan/s4880/irq_tables.c | 43 ------ src/mainboard/tyan/s4880/mptable.c | 214 -------------------------- src/mainboard/tyan/s4880/resourcemap.c | 263 -------------------------------- src/mainboard/tyan/s4880/romstage.c | 151 ------------------ 9 files changed, 892 deletions(-) diff --git a/src/mainboard/tyan/s4880/Kconfig b/src/mainboard/tyan/s4880/Kconfig deleted file mode 100644 index 6c85c6c..0000000 --- a/src/mainboard/tyan/s4880/Kconfig +++ /dev/null @@ -1,57 +0,0 @@ -if BOARD_TYAN_S4880 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_940 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_AMD_AMD8111 - select SOUTHBRIDGE_AMD_AMD8131 - select SUPERIO_WINBOND_W83627HF - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_512 - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select QRANK_DIMM_SUPPORT - -config MAINBOARD_DIR - string - default tyan/s4880 - -config DCACHE_RAM_BASE - hex - default 0xcf000 - -config DCACHE_RAM_SIZE - hex - default 0x01000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MAINBOARD_PART_NUMBER - string - default "S4880" - -config MAX_CPUS - int - default 8 - -config MAX_PHYSICAL_CPUS - int - default 4 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config HT_CHAIN_UNITID_BASE - hex - default 0x1 - -config IRQ_SLOT_COUNT - int - default 22 - -endif # BOARD_TYAN_S4880 diff --git a/src/mainboard/tyan/s4880/Kconfig.name b/src/mainboard/tyan/s4880/Kconfig.name deleted file mode 100644 index 2e71996..0000000 --- a/src/mainboard/tyan/s4880/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_TYAN_S4880 - bool "S4880 (Thunder K8QS)" diff --git a/src/mainboard/tyan/s4880/board_info.txt b/src/mainboard/tyan/s4880/board_info.txt deleted file mode 100644 index d2ab0ab..0000000 --- a/src/mainboard/tyan/s4880/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Board name: Thunder K8QS (S4880) -Category: server -Board URL: http://www.tyan.com/archive/products/html/thunderk8qs.html -Release year: 2004 diff --git a/src/mainboard/tyan/s4880/cmos.layout b/src/mainboard/tyan/s4880/cmos.layout deleted file mode 100644 index 4e081ea..0000000 --- a/src/mainboard/tyan/s4880/cmos.layout +++ /dev/null @@ -1,60 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/tyan/s4880/devicetree.cb b/src/mainboard/tyan/s4880/devicetree.cb deleted file mode 100644 index d64d054..0000000 --- a/src/mainboard/tyan/s4880/devicetree.cb +++ /dev/null @@ -1,98 +0,0 @@ -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_940 - device lapic 0 on end - end - end - - device domain 0 on - subsystemid 0x10f1 0x4880 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on end # LDT0 - device pci 18.0 on end # LDT1 - device pci 18.0 on # northbridge - # devices on link 2, link 2 == LDT 2 - chip southbridge/amd/amd8131 - # the on/off keyword is mandatory - device pci 0.0 on -# chip drivers/lsi/53c1030 -# device pci 4.0 on end -# device pci 4.1 on end -# register "fw_address" = "0xfff8c000" -# end - device pci 9.0 on end - device pci 9.1 on end - end - device pci 0.1 on end - device pci 1.0 on end - device pci 1.1 on end - end - chip southbridge/amd/amd8111 - # this "device pci 0.0" is the parent the next one - # PCI bridge - device pci 0.0 on - device pci 0.0 on end - device pci 0.1 on end - device pci 0.2 off end - device pci 1.0 off end - device pci 6.0 on end - end - device pci 1.0 on - chip superio/winbond/w83627hf - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # CIR - io 0x60 = 0x100 - end - device pnp 2e.7 off # GAME_MIDI_GIPO1 - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on end - device pci 1.2 on end - device pci 1.3 on end - device pci 1.5 off end - device pci 1.6 off end - register "ide0_enable" = "1" - register "ide1_enable" = "1" - end - end # device pci 18.0 - - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - - end #domain -end diff --git a/src/mainboard/tyan/s4880/irq_tables.c b/src/mainboard/tyan/s4880/irq_tables.c deleted file mode 100644 index 848d2d9..0000000 --- a/src/mainboard/tyan/s4880/irq_tables.c +++ /dev/null @@ -1,43 +0,0 @@ -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 1, /* Where the interrupt router lies (bus) */ - (4<<3)|3, /* Where the interrupt router lies (dev) */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x1022, /* Vendor */ - 0x7400, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x9a, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - {0,0xc0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {1,(3<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {0x4,0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, - {0x4,0x8, {{0x1, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {0x4,0x20, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x1, 0}, - {0x4,0x18, {{0x2, 0xdef8}, {0x1, 0xdef8}, {0x3, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {0x4,0x28, {{0x4, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {0x4,0x30, {{0x3, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {1,(4<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {1,(1<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {0x2,0x18, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x2, 0}, - {0x2,0x10, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x3, 0}, - {0x2,0x48, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {0x2,0x20, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {1,(2<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {0x3,0x18, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x4, 0}, - {0x3,0x8, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x5, 0}, - {0x3,0x20, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x6, 0}, - {0x3,0x28, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x7, 0}, - {0,0xc8, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {0,0xd0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {0,0xd8, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - } -}; -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/tyan/s4880/mptable.c b/src/mainboard/tyan/s4880/mptable.c deleted file mode 100644 index b315c40..0000000 --- a/src/mainboard/tyan/s4880/mptable.c +++ /dev/null @@ -1,214 +0,0 @@ -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -static unsigned node_link_to_bus(unsigned node, unsigned link) -{ - device_t dev; - unsigned reg; - - dev = dev_find_slot(0, PCI_DEVFN(0x18, 1)); - if (!dev) { - return 0; - } - for(reg = 0xE0; reg < 0xF0; reg += 0x04) { - uint32_t config_map; - unsigned dst_node; - unsigned dst_link; - unsigned bus_base; - config_map = pci_read_config32(dev, reg); - if ((config_map & 3) != 3) { - continue; - } - dst_node = (config_map >> 4) & 7; - dst_link = (config_map >> 8) & 3; - bus_base = (config_map >> 16) & 0xff; -#if 0 - printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", - dst_node, dst_link, bus_base, - reg, config_map); -#endif - if ((dst_node == node) && (dst_link == link)) - { - return bus_base; - } - } - return 0; -} - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - unsigned char bus_chain_0; - unsigned char bus_8131_1; - unsigned char bus_8131_2; - unsigned char bus_8111_1; - unsigned apicid_base; - unsigned apicid_8111; - unsigned apicid_8131_1; - unsigned apicid_8131_2; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - { - device_t dev; - - /* HT chain 0 */ - bus_chain_0 = node_link_to_bus(0, 2); - if (bus_chain_0 == 0) { - printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n"); - bus_chain_0 = 1; - } - - /* 8111 */ - dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x03,0)); - if (dev) { - bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); - - bus_8111_1 = 4; - } - /* 8131-1 */ - dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x01,0)); - if (dev) { - bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); - - bus_8131_1 = 2; - } - /* 8131-2 */ - dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x02,0)); - if (dev) { - bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); - - bus_8131_2 = 3; - } - } - -/*Bus: Bus ID Type*/ - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(3); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_8111 = apicid_base+0; - apicid_8131_1 = apicid_base+1; - apicid_8131_2 = apicid_base+2; - - smp_write_ioapic(mc, apicid_8111, 0x11, VIO_APIC_VADDR); - { - device_t dev; - struct resource *res; - dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x1,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, apicid_8131_1, 0x11, - res2mmio(res, 0, 0)); - } - } - dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x2,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, apicid_8131_2, 0x11, - res2mmio(res, 0, 0)); - } - } - - } - - mptable_add_isa_interrupts(mc, bus_isa, apicid_8111, 0); - -/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chain_0, (4<<2)|0, apicid_8111, 0x13); - - -//On Board AMD USB - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13); - -//On Board Via USB 1.1 and 2 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (3<<2)|0, apicid_8111, 0x11); //1.1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (3<<2)|1, apicid_8111, 0x10); //1.1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (3<<2)|2, apicid_8111, 0x12); //2 - -//Slot 5 PCI 32 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|0, apicid_8111, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|1, apicid_8111, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|2, apicid_8111, 0x12); // - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|3, apicid_8111, 0x13); // - - -//On Board SI Serial ATA - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (5<<2)|0, apicid_8111, 0x13); -//On Board ATI Display Adapter - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (6<<2)|0, apicid_8111, 0x12); - - -//Slot 4 PCIX 100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|0, apicid_8131_1, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|1, apicid_8131_1, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|2, apicid_8131_1, 0x1);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|3, apicid_8131_1, 0x2);// - -//Slot 3 PCIX 100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|0, apicid_8131_1, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|1, apicid_8131_1, 0x3);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|2, apicid_8131_1, 0x0);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|3, apicid_8131_1, 0x1);// - -//On Board LSI scsi and NIC - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|0, apicid_8131_1, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|1, apicid_8131_1, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|0, apicid_8131_1, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|1, apicid_8131_1, 0x1); - -//Slot 2 PCI-X 133/100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|0, apicid_8131_2, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|1, apicid_8131_2, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|2, apicid_8131_2, 0x2); // - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|3, apicid_8131_2, 0x3); // - -//Slot 1 PCI-X 133/100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|0, apicid_8131_2, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|1, apicid_8131_2, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|2, apicid_8131_2, 0x3);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|3, apicid_8131_2, 0x0);// - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/tyan/s4880/resourcemap.c b/src/mainboard/tyan/s4880/resourcemap.c deleted file mode 100644 index f6801f1a..0000000 --- a/src/mainboard/tyan/s4880/resourcemap.c +++ /dev/null @@ -1,263 +0,0 @@ -/* - * Tyan S4880 needs a different resource map - * - */ - -static void setup_s4880_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff20, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ -// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000203, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/tyan/s4880/romstage.c b/src/mainboard/tyan/s4880/romstage.c deleted file mode 100644 index 5c0b128..0000000 --- a/src/mainboard/tyan/s4880/romstage.c +++ /dev/null @@ -1,151 +0,0 @@ -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <stdlib.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <lib.h> -#include <cpu/amd/model_fxx_rev.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "southbridge/amd/amd8111/early_smbus.c" -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "southbridge/amd/amd8111/early_ctrl.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -static void memreset_setup(void) -{ - if (is_cpu_pre_c0()) - outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 - else - outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 - outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ - if (is_cpu_pre_c0()) { - udelay(800); - outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 - udelay(90); - } -} - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ -#define SMBUS_HUB 0x18 - unsigned device=(ctrl->channel0[0])>>8; - smbus_write_byte(SMBUS_HUB, 0x01, device); - smbus_write_byte(SMBUS_HUB, 0x03, 0); -} - - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/raminit.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include <spd.h> -#include "cpu/amd/model_fxx/init_cpus.c" - -#define RC0 ((1<<2)<<8) -#define RC1 ((1<<1)<<8) -#define RC2 ((1<<4)<<8) -#define RC3 ((1<<3)<<8) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const struct mem_controller cpu[] = { - { - .node_id = 0, - .f0 = PCI_DEV(0, 0x18, 0), - .f1 = PCI_DEV(0, 0x18, 1), - .f2 = PCI_DEV(0, 0x18, 2), - .f3 = PCI_DEV(0, 0x18, 3), - .channel0 = { RC0|DIMM0, RC0|DIMM2, 0, 0 }, - .channel1 = { RC0|DIMM1, RC0|DIMM3, 0, 0 }, - }, -#if CONFIG_MAX_PHYSICAL_CPUS > 1 - { - .node_id = 1, - .f0 = PCI_DEV(0, 0x19, 0), - .f1 = PCI_DEV(0, 0x19, 1), - .f2 = PCI_DEV(0, 0x19, 2), - .f3 = PCI_DEV(0, 0x19, 3), - .channel0 = { RC1|DIMM0, RC1|DIMM2 , 0, 0 }, - .channel1 = { RC1|DIMM1, RC1|DIMM3 , 0, 0 }, - - }, -#endif -#if CONFIG_MAX_PHYSICAL_CPUS > 2 - { - .node_id = 2, - .f0 = PCI_DEV(0, 0x1a, 0), - .f1 = PCI_DEV(0, 0x1a, 1), - .f2 = PCI_DEV(0, 0x1a, 2), - .f3 = PCI_DEV(0, 0x1a, 3), - .channel0 = { RC2|DIMM0, RC2|DIMM2, 0, 0 }, - .channel1 = { RC2|DIMM1, RC2|DIMM3, 0, 0 }, - - }, - { - .node_id = 3, - .f0 = PCI_DEV(0, 0x1b, 0), - .f1 = PCI_DEV(0, 0x1b, 1), - .f2 = PCI_DEV(0, 0x1b, 2), - .f3 = PCI_DEV(0, 0x1b, 3), - .channel0 = { RC3|DIMM0, RC3|DIMM2, 0, 0 }, - .channel1 = { RC3|DIMM1, RC3|DIMM3, 0, 0 }, - - }, -#endif - }; - - int needs_reset; - - if (bist == 0) - init_cpus(cpu_init_detectedx); - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - setup_s4880_resource_map(); - - needs_reset = setup_coherent_ht_domain(); - -#if CONFIG_LOGICAL_CPUS - // It is said that we should start core1 after all core0 launched - start_other_cores(); -#endif - // automatically set that for you, but you might meet tight space - needs_reset |= ht_setup_chains_x(); - - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - enable_smbus(); - - memreset_setup(); - sdram_initialize(ARRAY_SIZE(cpu), cpu); - - post_cache_as_ram(); -}

1 0

Patch set updated for coreboot: [REMOVAL] tyan/s4882
by Stefan Reinauer 10 Nov '15

10 Nov '15

Stefan Reinauer (stefan.reinauer(a)coreboot.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12385 -gerrit commit d30aeaeba5c6a91eb88ca6d5f6636dbf03e154bb Author: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Date: Tue Nov 10 11:35:24 2015 -0800 [REMOVAL] tyan/s4882 As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: I866440595a0a38b65ce037dc9a1f7e4c02c6beb3 Signed-off-by: Stefan Reinauer <stefan.reinauer(a)coreboot.org> --- src/mainboard/tyan/s4882/Kconfig | 57 ------- src/mainboard/tyan/s4882/Kconfig.name | 2 - src/mainboard/tyan/s4882/board_info.txt | 4 - src/mainboard/tyan/s4882/cmos.layout | 60 -------- src/mainboard/tyan/s4882/devicetree.cb | 195 ----------------------- src/mainboard/tyan/s4882/irq_tables.c | 43 ------ src/mainboard/tyan/s4882/mptable.c | 213 -------------------------- src/mainboard/tyan/s4882/resourcemap.c | 263 -------------------------------- src/mainboard/tyan/s4882/romstage.c | 135 ---------------- 9 files changed, 972 deletions(-) diff --git a/src/mainboard/tyan/s4882/Kconfig b/src/mainboard/tyan/s4882/Kconfig deleted file mode 100644 index 7723acf..0000000 --- a/src/mainboard/tyan/s4882/Kconfig +++ /dev/null @@ -1,57 +0,0 @@ -if BOARD_TYAN_S4882 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_940 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_AMD_AMD8111 - select SOUTHBRIDGE_AMD_AMD8131 - select SUPERIO_WINBOND_W83627HF - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_512 - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select QRANK_DIMM_SUPPORT - -config MAINBOARD_DIR - string - default tyan/s4882 - -config DCACHE_RAM_BASE - hex - default 0xcf000 - -config DCACHE_RAM_SIZE - hex - default 0x01000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MAINBOARD_PART_NUMBER - string - default "S4882" - -config MAX_CPUS - int - default 8 - -config MAX_PHYSICAL_CPUS - int - default 4 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config HT_CHAIN_UNITID_BASE - hex - default 0x1 - -config IRQ_SLOT_COUNT - int - default 22 - -endif # BOARD_TYAN_S4882 diff --git a/src/mainboard/tyan/s4882/Kconfig.name b/src/mainboard/tyan/s4882/Kconfig.name deleted file mode 100644 index 81b4a43..0000000 --- a/src/mainboard/tyan/s4882/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_TYAN_S4882 - bool "S4882 (Thunder K8QS Pro)" diff --git a/src/mainboard/tyan/s4882/board_info.txt b/src/mainboard/tyan/s4882/board_info.txt deleted file mode 100644 index 56ff244..0000000 --- a/src/mainboard/tyan/s4882/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Board name: Thunder K8QS Pro (S4882) -Category: server -Board URL: http://www.tyan.com/archive/products/html/thunderk8qspro.html -Release year: 2004 diff --git a/src/mainboard/tyan/s4882/cmos.layout b/src/mainboard/tyan/s4882/cmos.layout deleted file mode 100644 index 4e081ea..0000000 --- a/src/mainboard/tyan/s4882/cmos.layout +++ /dev/null @@ -1,60 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/tyan/s4882/devicetree.cb b/src/mainboard/tyan/s4882/devicetree.cb deleted file mode 100644 index 0eb59af..0000000 --- a/src/mainboard/tyan/s4882/devicetree.cb +++ /dev/null @@ -1,195 +0,0 @@ -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_940 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x10f1 0x4882 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on end # LDT0 - device pci 18.0 on # northbridge - # devices on link 1, link 1 == LDT 1 - chip southbridge/amd/amd8131 - # the on/off keyword is mandatory - device pci 0.0 on -# chip drivers/lsi/53c1030 -# device pci 4.0 on end -# device pci 4.1 on end -# register "fw_address" = "0xfff8c000" -# end - device pci 9.0 on end #Broadcom - device pci 9.1 on end - end - device pci 0.1 on end - device pci 1.0 on end - device pci 1.1 on end - end - chip southbridge/amd/amd8111 - # this "device pci 0.0" is the parent the next one - # PCI bridge - device pci 0.0 on - device pci 0.0 on end - device pci 0.1 on end - device pci 0.2 off end - device pci 1.0 off end - #chip drivers/ati/ragexl - device pci 6.0 on end - #end - device pci 5.0 on end #SiI - end - device pci 1.0 on - chip superio/winbond/w83627hf - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # CIR - io 0x60 = 0x100 - end - device pnp 2e.7 off # GAME_MIDI_GIPO1 - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on end - device pci 1.2 on end - device pci 1.3 on -# chip drivers/i2c/i2cmux # pca9556 smbus mux -# device i2c 18 on #0 pca9516 2, 1 -# chip drivers/i2c/lm63 #cpu0 temp -# device i2c 4c on end -# end -# end -# device i2c 18 on #1 pca9516 1, 1 -# chip drivers/generic/generic #dimm 1-0-0 -# device i2c 50 on end -# end -# chip drivers/generic/generic #dimm 1-0-1 -# device i2c 51 on end -# end -# chip drivers/generic/generic #dimm 1-1-0 -# device i2c 52 on end -# end -# chip drivers/generic/generic #dimm 1-1-1 -# device i2c 53 on end -# end -# end -# device i2c 18 on #2 pca9516 1, 2 -# chip drivers/generic/generic #dimm 0-0-0 -# device i2c 50 on end -# end -# chip drivers/generic/generic #dimm 0-0-1 -# device i2c 51 on end -# end -# chip drivers/generic/generic #dimm 0-1-0 -# device i2c 52 on end -# end -# chip drivers/generic/generic #dimm 0-1-1 -# device i2c 53 on end -# end -# end -# device i2c 18 on #3 pca9516 1, 3 -# chip drivers/generic/generic #dimm 3-0-0 -# device i2c 50 on end -# end -# chip drivers/generic/generic #dimm 3-0-1 -# device i2c 51 on end -# end -# chip drivers/generic/generic #dimm 3-1-0 -# device i2c 52 on end -# end -# chip drivers/generic/generic #dimm 3-1-1 -# device i2c 53 on end -# end -# end -# device i2c 18 on #4 pca9516 1, 4 -# chip drivers/generic/generic #dimm 2-0-0 -# device i2c 50 on end -# end -# chip drivers/generic/generic #dimm 2-0-1 -# device i2c 51 on end -# end -# chip drivers/generic/generic #dimm 2-1-0 -# device i2c 52 on end -# end -# chip drivers/generic/generic #dimm 2-1-1 -# device i2c 53 on end -# end -# end -# device i2c 18 on #5 pca9516 2, 2 -# chip drivers/i2c/lm63 #cpu1 temp -# device i2c 4c on end -# end -# end -# device i2c 18 on #6 pca9516 2, 3 -# chip drivers/i2c/lm63 #cpu2 temp -# device i2c 4c on end -# end -# end -# device i2c 18 on #7 pca9516 2, 4 -# chip drivers/i2c/lm63 #cpu3 temp -# device i2c 4c on end -# end -# end -# end # i2cmux -# chip drivers/i2c/adm1027 # ADM1027 CPU1 vid and System FAN... -# device i2c 2e on end -# end -# chip drivers/generic/generic # Winbond HWM 0x54 CPU0 vid -# device i2c 2a on end -# end -# chip drivers/generic/generic # Winbond HWM 0x92 -# device i2c 49 on end -# end -# chip drivers/generic/generic # Winbond HWM 0x94 -# device i2c 4a on end -# end -# chip drivers/generic/generic # ?? -# device i2c 69 on end -# end - end # acpi - device pci 1.5 off end - device pci 1.6 off end - register "ide0_enable" = "1" - register "ide1_enable" = "1" - end - end # device pci 18.0 - - device pci 18.0 on end - - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - - end -end diff --git a/src/mainboard/tyan/s4882/irq_tables.c b/src/mainboard/tyan/s4882/irq_tables.c deleted file mode 100644 index e7d6b1a..0000000 --- a/src/mainboard/tyan/s4882/irq_tables.c +++ /dev/null @@ -1,43 +0,0 @@ -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 1, /* Where the interrupt router lies (bus) */ - (4<<3)|3, /* Where the interrupt router lies (dev) */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x1022, /* Vendor */ - 0x7400, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x5b, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - {0,0xc0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {1,(3<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {0x4,0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, - {0x4,0x8, {{0x1, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {0x4,0x20, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x1, 0}, - {0x4,0x18, {{0x2, 0xdef8}, {0x1, 0xdef8}, {0x3, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {0x4,0x28, {{0x4, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {0x4,0x30, {{0x3, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {1,(4<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {1,(1<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {0x2,0x18, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x2, 0}, - {0x2,0x10, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x3, 0}, - {0x2,0x48, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {0x2,0x20, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {1,(2<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {0x3,0x18, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x4, 0}, - {0x3,0x8, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x5, 0}, - {0x3,0x20, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x6, 0}, - {0x3,0x28, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x7, 0}, - {0,0xc8, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {0,0xd0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {0,0xd8, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - } -}; -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/tyan/s4882/mptable.c b/src/mainboard/tyan/s4882/mptable.c deleted file mode 100644 index 7bde349..0000000 --- a/src/mainboard/tyan/s4882/mptable.c +++ /dev/null @@ -1,213 +0,0 @@ -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -static unsigned node_link_to_bus(unsigned node, unsigned link) -{ - device_t dev; - unsigned reg; - - dev = dev_find_slot(0, PCI_DEVFN(0x18, 1)); - if (!dev) { - return 0; - } - for(reg = 0xE0; reg < 0xF0; reg += 0x04) { - uint32_t config_map; - unsigned dst_node; - unsigned dst_link; - unsigned bus_base; - config_map = pci_read_config32(dev, reg); - if ((config_map & 3) != 3) { - continue; - } - dst_node = (config_map >> 4) & 7; - dst_link = (config_map >> 8) & 3; - bus_base = (config_map >> 16) & 0xff; -#if 0 - printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", - dst_node, dst_link, bus_base, - reg, config_map); -#endif - if ((dst_node == node) && (dst_link == link)) - { - return bus_base; - } - } - return 0; -} - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - unsigned char bus_chain_0; - unsigned char bus_8131_1; - unsigned char bus_8131_2; - unsigned char bus_8111_1; - unsigned apicid_base; - unsigned apicid_8111; - unsigned apicid_8131_1; - unsigned apicid_8131_2; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - { - device_t dev; - - /* HT chain 0 */ - bus_chain_0 = node_link_to_bus(0, 1); - if (bus_chain_0 == 0) { - printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n"); - bus_chain_0 = 1; - } - - /* 8111 */ - dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x03,0)); - if (dev) { - bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); - - bus_8111_1 = 4; - } - /* 8131-1 */ - dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x01,0)); - if (dev) { - bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); - - bus_8131_1 = 2; - } - /* 8131-2 */ - dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x02,0)); - if (dev) { - bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); - - bus_8131_2 = 3; - } - } - -/*Bus: Bus ID Type*/ - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(3); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_8111 = apicid_base+0; - apicid_8131_1 = apicid_base+1; - apicid_8131_2 = apicid_base+2; - smp_write_ioapic(mc, apicid_8111, 0x11, VIO_APIC_VADDR); - { - device_t dev; - struct resource *res; - dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x1,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, apicid_8131_1, 0x11, - res2mmio(res, 0, 0)); - } - } - dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x2,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, apicid_8131_2, 0x11, - res2mmio(res, 0, 0)); - } - } - - } - - mptable_add_isa_interrupts(mc, bus_isa, apicid_8111, 0); - -/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chain_0, (4<<2)|0, apicid_8111, 0x13); - - -//On Board AMD USB - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13); - -//On Board Via USB 1.1 and 2 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (3<<2)|0, apicid_8111, 0x11); //1.1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (3<<2)|1, apicid_8111, 0x10); //1.1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (3<<2)|2, apicid_8111, 0x12); //2 - -//Slot 5 PCI 32 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|0, apicid_8111, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|1, apicid_8111, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|2, apicid_8111, 0x12); // - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|3, apicid_8111, 0x13); // - - -//On Board SI Serial ATA - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (5<<2)|0, apicid_8111, 0x13); -//On Board ATI Display Adapter - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (6<<2)|0, apicid_8111, 0x12); - - -//Slot 4 PCIX 100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|0, apicid_8131_1, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|1, apicid_8131_1, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|2, apicid_8131_1, 0x1);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|3, apicid_8131_1, 0x2);// - -//Slot 3 PCIX 100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|0, apicid_8131_1, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|1, apicid_8131_1, 0x3);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|2, apicid_8131_1, 0x0);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|3, apicid_8131_1, 0x1);// - -//On Board LSI scsi and NIC - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|0, apicid_8131_1, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|1, apicid_8131_1, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|0, apicid_8131_1, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|1, apicid_8131_1, 0x1); - -//Slot 2 PCI-X 133/100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|0, apicid_8131_2, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|1, apicid_8131_2, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|2, apicid_8131_2, 0x2); // - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|3, apicid_8131_2, 0x3); // - -//Slot 1 PCI-X 133/100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|0, apicid_8131_2, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|1, apicid_8131_2, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|2, apicid_8131_2, 0x3);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|3, apicid_8131_2, 0x0);// - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/tyan/s4882/resourcemap.c b/src/mainboard/tyan/s4882/resourcemap.c deleted file mode 100644 index a836573..0000000 --- a/src/mainboard/tyan/s4882/resourcemap.c +++ /dev/null @@ -1,263 +0,0 @@ -/* - * Tyan S4882 needs a different resource map - * - */ - -static void setup_s4882_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff10, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff010, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ -// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000103, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/tyan/s4882/romstage.c b/src/mainboard/tyan/s4882/romstage.c deleted file mode 100644 index ed84ab6..0000000 --- a/src/mainboard/tyan/s4882/romstage.c +++ /dev/null @@ -1,135 +0,0 @@ -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <lib.h> -#include <cpu/amd/model_fxx_rev.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "southbridge/amd/amd8111/early_smbus.c" -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "southbridge/amd/amd8111/early_ctrl.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -static void memreset_setup(void) -{ - if (is_cpu_pre_c0()) - outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 - else - outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 - outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ - if (is_cpu_pre_c0()) { - udelay(800); - outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 - udelay(90); - } -} - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ -#define SMBUS_HUB 0x18 - int ret,i; - unsigned device=(ctrl->channel0[0])>>8; - /* the very first write always get COL_STS=1 and ABRT_STS=1, so try another time*/ - i=2; - do { - ret = smbus_write_byte(SMBUS_HUB, 0x01, device); - } while ((ret!=0) && (i-->0)); - - smbus_write_byte(SMBUS_HUB, 0x03, 0); -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/raminit.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include <spd.h> -#include "cpu/amd/model_fxx/init_cpus.c" - -#define RC0 ((1<<2)<<8) -#define RC1 ((1<<1)<<8) -#define RC2 ((1<<4)<<8) -#define RC3 ((1<<3)<<8) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr [] = { - RC0|DIMM0, RC0|DIMM2, 0, 0, - RC0|DIMM1, RC0|DIMM3, 0, 0, -#if CONFIG_MAX_PHYSICAL_CPUS > 1 - RC1|DIMM0, RC1|DIMM2, 0, 0, - RC1|DIMM1, RC1|DIMM3, 0, 0, -#endif -#if CONFIG_MAX_PHYSICAL_CPUS > 2 - RC2|DIMM0, RC2|DIMM2, 0, 0, - RC2|DIMM1, RC2|DIMM3, 0, 0, - RC3|DIMM0, RC3|DIMM2, 0, 0, - RC3|DIMM1, RC3|DIMM3, 0, 0, -#endif - }; - - int needs_reset; - unsigned bsp_apicid = 0, nodes; - struct mem_controller ctrl[8]; - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx); - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - setup_s4882_resource_map(); - - needs_reset = setup_coherent_ht_domain(); - - wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS - // It is said that we should start core1 after all core0 launched - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - // automatically set that for you, but you might meet tight space - needs_reset |= ht_setup_chains_x(); - - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - nodes = get_nodes(); - //It's the time to set ctrl now; - fill_mem_ctrl(nodes, ctrl, spd_addr); - - enable_smbus(); - - memreset_setup(); - sdram_initialize(nodes, ctrl); - - post_cache_as_ram(); -}

1 0

Patch set updated for coreboot: [REMOVAL] iwill/dk8s2
by Stefan Reinauer 10 Nov '15

10 Nov '15

Stefan Reinauer (stefan.reinauer(a)coreboot.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12372 -gerrit commit 3efc9daf20bfc313eef46ff10f8dea3c27aa6292 Author: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Date: Tue Nov 10 11:22:19 2015 -0800 [REMOVAL] iwill/dk8s2 As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: I4a942150590fb69ff97279ff2b48b3be83abafa4 Signed-off-by: Stefan Reinauer <stefan.reinauer(a)coreboot.org> --- src/mainboard/iwill/dk8s2/Kconfig | 52 ---------- src/mainboard/iwill/dk8s2/Kconfig.name | 2 - src/mainboard/iwill/dk8s2/board_info.txt | 2 - src/mainboard/iwill/dk8s2/cmos.layout | 60 ----------- src/mainboard/iwill/dk8s2/devicetree.cb | 75 -------------- src/mainboard/iwill/dk8s2/irq_tables.c | 34 ------- src/mainboard/iwill/dk8s2/mptable.c | 166 ------------------------------- src/mainboard/iwill/dk8s2/romstage.c | 164 ------------------------------ 8 files changed, 555 deletions(-) diff --git a/src/mainboard/iwill/dk8s2/Kconfig b/src/mainboard/iwill/dk8s2/Kconfig deleted file mode 100644 index 6b54645..0000000 --- a/src/mainboard/iwill/dk8s2/Kconfig +++ /dev/null @@ -1,52 +0,0 @@ -if BOARD_IWILL_DK8S2 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_940 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_AMD_AMD8111 - select SOUTHBRIDGE_AMD_AMD8131 - select SUPERIO_WINBOND_W83627HF - select PARALLEL_CPU_INIT - select HAVE_PIRQ_TABLE - select HAVE_OPTION_TABLE - select HAVE_MP_TABLE - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select DRIVERS_ATI_RAGEXL - select BOARD_ROMSIZE_KB_512 - select RAMINIT_SYSINFO - select QRANK_DIMM_SUPPORT - -config MAINBOARD_DIR - string - default iwill/dk8s2 - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "DK8S2" - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config HT_CHAIN_UNITID_BASE - hex - default 0x1 - -config IRQ_SLOT_COUNT - int - default 12 - -endif # BOARD_IWILL_DK8S2 diff --git a/src/mainboard/iwill/dk8s2/Kconfig.name b/src/mainboard/iwill/dk8s2/Kconfig.name deleted file mode 100644 index ff5a685..0000000 --- a/src/mainboard/iwill/dk8s2/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_IWILL_DK8S2 - bool "DK8S2" diff --git a/src/mainboard/iwill/dk8s2/board_info.txt b/src/mainboard/iwill/dk8s2/board_info.txt deleted file mode 100644 index d84d5c8..0000000 --- a/src/mainboard/iwill/dk8s2/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: server -Board URL: http://web.archive.org/web/20060509143427/http://www.iwill.net/product_2.as… diff --git a/src/mainboard/iwill/dk8s2/cmos.layout b/src/mainboard/iwill/dk8s2/cmos.layout deleted file mode 100644 index 4e081ea..0000000 --- a/src/mainboard/iwill/dk8s2/cmos.layout +++ /dev/null @@ -1,60 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/iwill/dk8s2/devicetree.cb b/src/mainboard/iwill/dk8s2/devicetree.cb deleted file mode 100644 index 21eadb3..0000000 --- a/src/mainboard/iwill/dk8s2/devicetree.cb +++ /dev/null @@ -1,75 +0,0 @@ -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_940 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x161f 0x3016 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on # LDT 0 - chip southbridge/amd/amd8131 - device pci 0.0 on end - device pci 0.1 on end - device pci 1.0 on end - device pci 1.1 on end - end - chip southbridge/amd/amd8111 - # this "device pci 0.0" is the parent the next one - # PCI bridge - device pci 0.0 on - device pci 0.0 on end - device pci 0.1 on end - device pci 0.2 on end - device pci 1.0 off end - end - device pci 1.0 on - chip superio/winbond/w83627hf - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off end # CIR - device pnp 2e.7 off end # GAME_MIDI_GIPO1 - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - end - end - end - device pci 1.1 on end - device pci 1.2 on end - device pci 1.3 on end - device pci 1.5 off end - device pci 1.6 off end - end - end # LDT0 - device pci 18.0 on end # LDT1 - device pci 18.0 on end # LDT2 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/iwill/dk8s2/irq_tables.c b/src/mainboard/iwill/dk8s2/irq_tables.c deleted file mode 100644 index b86e602..0000000 --- a/src/mainboard/iwill/dk8s2/irq_tables.c +++ /dev/null @@ -1,34 +0,0 @@ -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x07<<3)|0x3, /* Where the interrupt router lies (dev) */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x1022, /* Vendor */ - 0x746b, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x6d, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x07<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0x0def8}}, 0x0, 0x0}, - {0x03,(0x00<<3)|0x0, {{0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}, {0x04, 0x0def8}}, 0x0, 0x0}, - {0x02,(0x01<<3)|0x0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0x0def8}}, 0x1, 0x0}, - {0x02,(0x02<<3)|0x0, {{0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0xdef8}, {0x02, 0x0def8}}, 0x2, 0x0}, - {0x01,(0x01<<3)|0x0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0x0def8}}, 0x3, 0x0}, - {0x01,(0x02<<3)|0x0, {{0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0xdef8}, {0x02, 0x0def8}}, 0x4, 0x0}, - {0x03,(0x04<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0x0def8}}, 0x5, 0x0}, - {0x03,(0x05<<3)|0x0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0x0def8}}, 0x6, 0x0}, - {0x03,(0x06<<3)|0x0, {{0x03, 0xdef8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - {0x02,(0x03<<3)|0x0, {{0x04, 0xdef8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - {0x02,(0x04<<3)|0x0, {{0x01, 0xdef8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - {0x02,(0x05<<3)|0x0, {{0x02, 0xdef8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - } -}; -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/iwill/dk8s2/mptable.c b/src/mainboard/iwill/dk8s2/mptable.c deleted file mode 100644 index b460ff7..0000000 --- a/src/mainboard/iwill/dk8s2/mptable.c +++ /dev/null @@ -1,166 +0,0 @@ -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - unsigned char bus_8131_1; - unsigned char bus_8131_2; - unsigned char bus_8111_1; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - { - device_t dev; - - /* 8111 */ - dev = dev_find_slot(1, PCI_DEVFN(0x03,0)); - if (dev) { - bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); - bus_8111_1 = 4; - } - /* 8131-1 */ - dev = dev_find_slot(1, PCI_DEVFN(0x01,0)); - if (dev) { - bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); - bus_8131_1 = 2; - } - /* 8131-2 */ - dev = dev_find_slot(1, PCI_DEVFN(0x02,0)); - if (dev) { - bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); - bus_8131_2 = 3; - } - } - - mptable_write_buses(mc, NULL, &bus_isa); - - /* IOAPIC handling */ - smp_write_ioapic(mc, 2, 0x11, VIO_APIC_VADDR); - { - device_t dev; - struct resource *res; - /* 8131 apic 3 */ - dev = dev_find_slot(1, PCI_DEVFN(0x01,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, 0x03, 0x11, - res2mmio(res, 0, 0)); - } - } - /* 8131 apic 4 */ - dev = dev_find_slot(1, PCI_DEVFN(0x02,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, 0x04, 0x11, - res2mmio(res, 0, 0)); - } - } - } - - mptable_add_isa_interrupts(mc, bus_isa, 0x2, 0); - - /* Standard local interrupt assignments */ - mptable_lintsrc(mc, bus_isa); - - - /* PCI Slot 1 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_2, (1<<2)|0, 0x02, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_2, (1<<2)|1, 0x02, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_2, (1<<2)|2, 0x02, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_2, (1<<2)|3, 0x02, 0x10); - - /* PCI Slot 2 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_2, (2<<2)|0, 0x02, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_2, (2<<2)|1, 0x02, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_2, (2<<2)|2, 0x02, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_2, (2<<2)|3, 0x02, 0x11); - - /* PCI Slot 3 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_1, (1<<2)|0, 0x02, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_1, (1<<2)|1, 0x02, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_1, (1<<2)|2, 0x02, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_1, (1<<2)|3, 0x02, 0x10); - - /* PCI Slot 4 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_1, (2<<2)|0, 0x02, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_1, (2<<2)|1, 0x02, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_1, (2<<2)|2, 0x02, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_1, (2<<2)|3, 0x02, 0x11); - - /* PCI Slot 5 */ - // FIXME get the irqs right, it's just hacked to work for now - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (5<<2)|0, 0x02, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (5<<2)|1, 0x02, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (5<<2)|2, 0x02, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (5<<2)|3, 0x02, 0x10); - - /* PCI Slot 6 */ - // FIXME get the irqs right, it's just hacked to work for now - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (4<<2)|0, 0x02, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (4<<2)|1, 0x02, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (4<<2)|2, 0x02, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (4<<2)|3, 0x02, 0x13); - - /* On board nics */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_1, (3<<2)|0, 0x02, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_1, (4<<2)|0, 0x02, 0x13); - - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/iwill/dk8s2/romstage.c b/src/mainboard/iwill/dk8s2/romstage.c deleted file mode 100644 index 601c649..0000000 --- a/src/mainboard/iwill/dk8s2/romstage.c +++ /dev/null @@ -1,164 +0,0 @@ -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include "southbridge/amd/amd8111/early_smbus.c" -#include <northbridge/amd/amdk8/raminit.h> -#include "northbridge/amd/amdk8/reset_test.c" -#include <cpu/x86/bist.h> -#include <delay.h> -#include "northbridge/amd/amdk8/debug.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "southbridge/amd/amd8111/early_ctrl.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -/* - * GPIO28 of 8111 will control H0_MEMRESET_L - * GPIO29 of 8111 will control H1_MEMRESET_L - */ -static void memreset_setup(void) -{ - if (is_cpu_pre_c0()) { - /* Set the memreset low. */ - outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28); - /* Ensure the BIOS has control of the memory lines. */ - outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29); - } else { - /* Ensure the CPU has control of the memory lines. */ - outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29); - } -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ - if (is_cpu_pre_c0()) { - udelay(800); - /* Set memreset high. */ - outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28); - udelay(90); - } -} - -static void activate_spd_rom(const struct mem_controller *ctrl) { } - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include <northbridge/amd/amdk8/amdk8.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "northbridge/amd/amdk8/raminit.c" -#include "lib/generic_sdram.c" -#include "northbridge/amd/amdk8/resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include <spd.h> -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - // first node - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, - - // second node - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, - }; - - struct sys_info *sysinfo = &sysinfo_car; - int needs_reset; - unsigned bsp_apicid = 0; - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - - setup_default_resource_map(); - - printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid); - - setup_coherent_ht_domain(); // routing table and start other core0 - - wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS - // It is said that we should start core1 after all core0 launched - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - /* it will set up chains and store link pair for optimization later */ - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - -#if CONFIG_SET_FIDVID - { - msr_t msr; - msr=rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - // show final fid and vid - { - msr_t msr; - msr=rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } -#endif - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - - // fidvid change will issue one LDTSTOP and the HT change will be effective too - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset_x(sysinfo->sbbusn, sysinfo->sbdn); - } - - allow_all_aps_stop(bsp_apicid); - - //It's the time to set ctrl in sysinfo now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - -#if 0 - dump_smbus_registers(); -#endif - - memreset_setup(); - - //do we need apci timer, tsc...., only debug need it for better output - /* all ap stopped? */ - init_timer(); // Need to use TMICT to synchronize FID/VID - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - -#if 0 - dump_pci_devices(); -#endif - - post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now -}

1 0

Patch set updated for coreboot: [REMOVAL] tyan/s2850
by Stefan Reinauer 10 Nov '15

10 Nov '15

Stefan Reinauer (stefan.reinauer(a)coreboot.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12375 -gerrit commit 2900ced8d2cfd15900845aa863c0546a12fcd46c Author: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Date: Tue Nov 10 11:31:33 2015 -0800 [REMOVAL] tyan/s2850 As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: Ibf3849dcd7a1ef1d8bc5dfc864172a8254a64b6f Signed-off-by: Stefan Reinauer <stefan.reinauer(a)coreboot.org> --- src/mainboard/tyan/s2850/Kconfig | 47 --------- src/mainboard/tyan/s2850/Kconfig.name | 2 - src/mainboard/tyan/s2850/board_info.txt | 4 - src/mainboard/tyan/s2850/cmos.layout | 60 ------------ src/mainboard/tyan/s2850/devicetree.cb | 95 ------------------- src/mainboard/tyan/s2850/irq_tables.c | 33 ------- src/mainboard/tyan/s2850/mptable.c | 163 -------------------------------- src/mainboard/tyan/s2850/romstage.c | 106 --------------------- 8 files changed, 510 deletions(-) diff --git a/src/mainboard/tyan/s2850/Kconfig b/src/mainboard/tyan/s2850/Kconfig deleted file mode 100644 index 2866b0c..0000000 --- a/src/mainboard/tyan/s2850/Kconfig +++ /dev/null @@ -1,47 +0,0 @@ -if BOARD_TYAN_S2850 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_940 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_AMD_AMD8111 - select SUPERIO_WINBOND_W83627HF - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_512 - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - -config MAINBOARD_DIR - string - default tyan/s2850 - -config MAINBOARD_PART_NUMBER - string - default "S2850" - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config IRQ_SLOT_COUNT - int - default 12 - -config HT_CHAIN_UNITID_BASE - hex - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config APIC_ID_OFFSET - hex - default 0x0 - -endif # BOARD_TYAN_S2850 diff --git a/src/mainboard/tyan/s2850/Kconfig.name b/src/mainboard/tyan/s2850/Kconfig.name deleted file mode 100644 index 2597535..0000000 --- a/src/mainboard/tyan/s2850/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_TYAN_S2850 - bool "S2850 (Tomcat K8S)" diff --git a/src/mainboard/tyan/s2850/board_info.txt b/src/mainboard/tyan/s2850/board_info.txt deleted file mode 100644 index 905aedf..0000000 --- a/src/mainboard/tyan/s2850/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Board name: Tomcat K8S (S2850) -Category: server -Board URL: http://www.tyan.com/archive/products/html/tomcatk8s.html -Release date: 2003 diff --git a/src/mainboard/tyan/s2850/cmos.layout b/src/mainboard/tyan/s2850/cmos.layout deleted file mode 100644 index 4e081ea..0000000 --- a/src/mainboard/tyan/s2850/cmos.layout +++ /dev/null @@ -1,60 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/tyan/s2850/devicetree.cb b/src/mainboard/tyan/s2850/devicetree.cb deleted file mode 100644 index 2698542..0000000 --- a/src/mainboard/tyan/s2850/devicetree.cb +++ /dev/null @@ -1,95 +0,0 @@ -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_940 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x10f1 0x2850 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on # LDT0 - # devices on link 2, link 2 == LDT 2 - chip southbridge/amd/amd8111 - # this "device pci 0.0" is the parent the next one - # PCI bridge - device pci 0.0 on - device pci 0.0 on end - device pci 0.1 on end - device pci 0.2 off end - device pci 1.0 off end - #chip drivers/ati/ragexl - device pci b.0 on end - end - device pci 1.0 on - chip superio/winbond/w83627hf - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # CIR - io 0x60 = 0x100 - end - device pnp 2e.7 off # GAME_MIDI_GIPO1 - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on end - device pci 1.2 on end - device pci 1.3 on - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - end - device pci 1.5 on end - device pci 1.6 off end - register "ide0_enable" = "1" - register "ide1_enable" = "1" - end - end # device pci 18.0 - device pci 18.0 on end - device pci 18.0 on end - - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/tyan/s2850/irq_tables.c b/src/mainboard/tyan/s2850/irq_tables.c deleted file mode 100644 index 77bd67a..0000000 --- a/src/mainboard/tyan/s2850/irq_tables.c +++ /dev/null @@ -1,33 +0,0 @@ -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 1, /* Where the interrupt router lies (bus) */ - (2<<3)|3, /* Where the interrupt router lies (dev) */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x1022, /* Vendor */ - 0x746b, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x9b, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - {1,(2<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, - {0x2,0, {{0, 0}, {0, 0}, {0, 0}, {0x4, 0xdef8}}, 0, 0}, - {0x2,(0x0d<<3)|0, {{0x4, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, - {0x2,(0x0b<<3)|0, {{0x3, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, - {0x2,(3<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x5, 0}, - {0x2,(6<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x1, 0}, - {0x2,(7<<3)|0, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x2, 0}, - {0x2,(8<<3)|0, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x3, 0}, - {0x2,(9<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x4, 0}, - {0x2,(0x0a<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x6, 0}, - {0x2,(0x0e<<3)|0, {{0x1, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, - {0x2,(0x0c<<3)|0, {{0x2, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, - } -}; -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/tyan/s2850/mptable.c b/src/mainboard/tyan/s2850/mptable.c deleted file mode 100644 index c3fdeef..0000000 --- a/src/mainboard/tyan/s2850/mptable.c +++ /dev/null @@ -1,163 +0,0 @@ -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -static unsigned node_link_to_bus(unsigned node, unsigned link) -{ - device_t dev; - unsigned reg; - - dev = dev_find_slot(0, PCI_DEVFN(0x18, 1)); - if (!dev) { - return 0; - } - for(reg = 0xE0; reg < 0xF0; reg += 0x04) { - uint32_t config_map; - unsigned dst_node; - unsigned dst_link; - unsigned bus_base; - config_map = pci_read_config32(dev, reg); - if ((config_map & 3) != 3) { - continue; - } - dst_node = (config_map >> 4) & 7; - dst_link = (config_map >> 8) & 3; - bus_base = (config_map >> 16) & 0xff; -#if 0 - printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", - dst_node, dst_link, bus_base, - reg, config_map); -#endif - if ((dst_node == node) && (dst_link == link)) - { - return bus_base; - } - } - return 0; -} - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - unsigned char bus_chain_0; - unsigned char bus_8111_1; - unsigned apicid_base; - unsigned apicid_8111; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - { - device_t dev; - - /* HT chain 0 */ - bus_chain_0 = node_link_to_bus(0, 0); - if (bus_chain_0 == 0) { - printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n"); - bus_chain_0 = 1; - } - /* 8111 */ - dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x01,0)); - if (dev) { - bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); - - bus_8111_1 = 2; - } - } -/*Bus: Bus ID Type*/ - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(1); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_8111 = apicid_base+0; - - smp_write_ioapic(mc, apicid_8111, 0x11, VIO_APIC_VADDR); - - mptable_add_isa_interrupts(mc, bus_isa, apicid_8111, 0); - -/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chain_0, (2<<2)|3, apicid_8111, 0x13); - -//On Board AMD USB - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13); - -//On Board ATI Display Adapter - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0b<<2)|0, apicid_8111, 0x12); - -//Onboard Broadcom 5705 NIC - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0d<<2)|0, apicid_8111, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0e<<2)|0, apicid_8111, 0x10); -//Onboard SI Serial ATA - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0c<<2)|0, apicid_8111, 0x11); - - -//PCI Slot 1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x03<<2)|0, apicid_8111, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x03<<2)|1, apicid_8111, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x03<<2)|2, apicid_8111, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x03<<2)|3, apicid_8111, 0x13); - - -//PCI Slot 2 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x06<<2)|0, apicid_8111, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x06<<2)|1, apicid_8111, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x06<<2)|2, apicid_8111, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x06<<2)|3, apicid_8111, 0x10); - - -//PCI Slot 3 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x07<<2)|0, apicid_8111, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x07<<2)|1, apicid_8111, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x07<<2)|2, apicid_8111, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x07<<2)|3, apicid_8111, 0x11); - - -//PCI Slot 4 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x08<<2)|0, apicid_8111, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x08<<2)|1, apicid_8111, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x08<<2)|2, apicid_8111, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x08<<2)|3, apicid_8111, 0x12); - -//PCI Slot 5 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x09<<2)|0, apicid_8111, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x09<<2)|1, apicid_8111, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x09<<2)|2, apicid_8111, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x09<<2)|3, apicid_8111, 0x13); - -//PCI Slot 6 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|0, apicid_8111, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|1, apicid_8111, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|2, apicid_8111, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|3, apicid_8111, 0x10); - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/tyan/s2850/romstage.c b/src/mainboard/tyan/s2850/romstage.c deleted file mode 100644 index bb91a2a..0000000 --- a/src/mainboard/tyan/s2850/romstage.c +++ /dev/null @@ -1,106 +0,0 @@ -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <stdlib.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <lib.h> -#include <spd.h> -#include <cpu/amd/model_fxx_rev.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "southbridge/amd/amd8111/early_smbus.c" -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "southbridge/amd/amd8111/early_ctrl.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -static void memreset_setup(void) -{ - if (is_cpu_pre_c0()) - outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 - else - outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 - outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ - if (is_cpu_pre_c0()) { - udelay(800); - outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 - udelay(90); - } -} - -static void activate_spd_rom(const struct mem_controller *ctrl) { } - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/raminit.c" -#include "northbridge/amd/amdk8/resourcemap.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const struct mem_controller cpu[] = { - { - .node_id = 0, - .f0 = PCI_DEV(0, 0x18, 0), - .f1 = PCI_DEV(0, 0x18, 1), - .f2 = PCI_DEV(0, 0x18, 2), - .f3 = PCI_DEV(0, 0x18, 3), - .channel0 = { DIMM0, DIMM2, 0, 0 }, - .channel1 = { DIMM1, DIMM3, 0, 0 }, - }, - }; - - int needs_reset; - - if (bist == 0) - init_cpus(cpu_init_detectedx); - -// post_code(0x32); - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - setup_default_resource_map(); - - needs_reset = setup_coherent_ht_domain(); - -#if CONFIG_LOGICAL_CPUS - // It is said that we should start core1 after all core0 launched - start_other_cores(); -#endif - needs_reset |= ht_setup_chains_x(); - - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - enable_smbus(); - - memreset_setup(); - sdram_initialize(ARRAY_SIZE(cpu), cpu); - - post_cache_as_ram(); -}

1 0

Patch set updated for coreboot: [REMOVAL] tyan/s2735
by Stefan Reinauer 10 Nov '15

10 Nov '15

Stefan Reinauer (stefan.reinauer(a)coreboot.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12374 -gerrit commit 440101531a5353e4ba2418cb46d291f29f88daca Author: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Date: Tue Nov 10 11:31:17 2015 -0800 [REMOVAL] tyan/s2735 As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: I460208c18964857be73d9a4449ecfd872ccad98a Signed-off-by: Stefan Reinauer <stefan.reinauer(a)coreboot.org> --- src/mainboard/tyan/s2735/Kconfig | 41 ---------- src/mainboard/tyan/s2735/Kconfig.name | 2 - src/mainboard/tyan/s2735/board_info.txt | 4 - src/mainboard/tyan/s2735/cmos.layout | 46 ----------- src/mainboard/tyan/s2735/devicetree.cb | 85 -------------------- src/mainboard/tyan/s2735/irq_tables.c | 38 --------- src/mainboard/tyan/s2735/mptable.c | 132 -------------------------------- src/mainboard/tyan/s2735/romstage.c | 76 ------------------ 8 files changed, 424 deletions(-) diff --git a/src/mainboard/tyan/s2735/Kconfig b/src/mainboard/tyan/s2735/Kconfig deleted file mode 100644 index a64c0e3..0000000 --- a/src/mainboard/tyan/s2735/Kconfig +++ /dev/null @@ -1,41 +0,0 @@ -if BOARD_TYAN_S2735 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SOCKET_MPGA604 - select NORTHBRIDGE_INTEL_E7501 - select SOUTHBRIDGE_INTEL_I82870 - select SOUTHBRIDGE_INTEL_I82801EX - select SUPERIO_WINBOND_W83627HF - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select UDELAY_TSC - select HAVE_OPTION_TABLE - select USE_WATCHDOG_ON_BOOT - select BOARD_ROMSIZE_KB_512 - -config MAINBOARD_DIR - string - default tyan/s2735 - -config DCACHE_RAM_BASE - hex - default 0xcf000 - -config DCACHE_RAM_SIZE - hex - default 0x1000 - -config MAINBOARD_PART_NUMBER - string - default "S2735" - -config IRQ_SLOT_COUNT - int - default 15 - -config MAX_CPUS - int - default 4 - -endif # BOARD_TYAN_S2735 diff --git a/src/mainboard/tyan/s2735/Kconfig.name b/src/mainboard/tyan/s2735/Kconfig.name deleted file mode 100644 index 9f16bf2..0000000 --- a/src/mainboard/tyan/s2735/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_TYAN_S2735 - bool "S2735 (Tiger i7501R)" diff --git a/src/mainboard/tyan/s2735/board_info.txt b/src/mainboard/tyan/s2735/board_info.txt deleted file mode 100644 index 36caa0b..0000000 --- a/src/mainboard/tyan/s2735/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Board name: Tiger i7501R (S2735) -Category: server -Board URL: http://www.tyan.com/archive/products/html/tigeri7501r.html -Release year: 2003 diff --git a/src/mainboard/tyan/s2735/cmos.layout b/src/mainboard/tyan/s2735/cmos.layout deleted file mode 100644 index fc3cdb2..0000000 --- a/src/mainboard/tyan/s2735/cmos.layout +++ /dev/null @@ -1,46 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 2 hyper_threading -396 1 e 1 thermal_monitoring -397 1 e 1 remap_memory_high -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -#440 4 e 9 slow_cpu -444 1 e 1 nmi -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/tyan/s2735/devicetree.cb b/src/mainboard/tyan/s2735/devicetree.cb deleted file mode 100644 index 866bdc5..0000000 --- a/src/mainboard/tyan/s2735/devicetree.cb +++ /dev/null @@ -1,85 +0,0 @@ -chip northbridge/intel/e7501 - device domain 0 on - subsystemid 0x10f1 0x2735 inherit - device pci 0.0 on end - device pci 0.1 on end - device pci 2.0 on - chip southbridge/intel/i82870 - device pci 1c.0 on end - device pci 1d.0 on - device pci 1.0 on end # intel lan - device pci 1.1 on end - end - device pci 1e.0 on end - device pci 1f.0 on end - end - end - device pci 6.0 on end - chip southbridge/intel/i82801ex - device pci 1d.0 on end - device pci 1d.1 on end - device pci 1d.2 on end - device pci 1d.3 on end - device pci 1d.7 on end - device pci 1e.0 on - device pci 1.0 on end # intel lan 10/100 - device pci 2.0 on end # ati - end - device pci 1f.0 on - chip superio/winbond/w83627hf - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # CIR - io 0x60 = 0x100 - end - device pnp 2e.7 off # GAME_MIDI_GIPO1 - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1f.1 off end - device pci 1f.2 on end - device pci 1f.3 on end - device pci 1f.5 off end - device pci 1f.6 off end - end # SB - end # PCI domain - device cpu_cluster 0 on - chip cpu/intel/socket_mPGA604 - device lapic 0 on end - end - chip cpu/intel/socket_mPGA604 - device lapic 6 on end - end - end -end diff --git a/src/mainboard/tyan/s2735/irq_tables.c b/src/mainboard/tyan/s2735/irq_tables.c deleted file mode 100644 index ba1c7b3..0000000 --- a/src/mainboard/tyan/s2735/irq_tables.c +++ /dev/null @@ -1,38 +0,0 @@ -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x1f<<3)|0x0, /* Where the interrupt router lies (dev) */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x24d0, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x9a, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x04,(0x08<<3)|0x0, {{0x68, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - {0x00,(0x1f<<3)|0x0, {{0x62, 0xdcf8}, {0x61, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - {0x00,(0x1d<<3)|0x0, {{0x60, 0xdcf8}, {0x63, 0xdcf8}, {0x62, 0xdcf8}, {0x6b, 0x0dcf8}}, 0x0, 0x0}, - {0x04,(0x03<<3)|0x0, {{0x62, 0xdcf8}, {0x63, 0xdcf8}, {0x60, 0xdcf8}, {0x61, 0x0dcf8}}, 0x3, 0x0}, - {0x04,(0x02<<3)|0x0, {{0x62, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - {0x03,(0x1f<<3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - {0x02,(0x1f<<3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - {0x03,(0x03<<3)|0x0, {{0x60, 0xdcf8}, {0x60, 0xdcf8}, {0x60, 0xdcf8}, {0x60, 0x0dcf8}}, 0x1, 0x0}, - {0x03,(0x06<<3)|0x0, {{0x60, 0xdcf8}, {0x60, 0xdcf8}, {0x60, 0xdcf8}, {0x60, 0x0dcf8}}, 0x2, 0x0}, - {0x02,(0x01<<3)|0x0, {{0x60, 0xdcf8}, {0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - {0x02,(0x02<<3)|0x0, {{0x60, 0xdcf8}, {0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - {0x04,(0x01<<3)|0x0, {{0x61, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - {0x04,(0x04<<3)|0x0, {{0x63, 0xdcf8}, {0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0x0dcf8}}, 0x4, 0x0}, - {0x03,(0x04<<3)|0x0, {{0x60, 0xdcf8}, {0x60, 0xdcf8}, {0x60, 0xdcf8}, {0x60, 0x0dcf8}}, 0x5, 0x0}, - {0x03,(0x05<<3)|0x0, {{0x60, 0xdcf8}, {0x60, 0xdcf8}, {0x60, 0xdcf8}, {0x60, 0x0dcf8}}, 0x6, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/tyan/s2735/mptable.c b/src/mainboard/tyan/s2735/mptable.c deleted file mode 100644 index 1d1c2e7..0000000 --- a/src/mainboard/tyan/s2735/mptable.c +++ /dev/null @@ -1,132 +0,0 @@ -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int isa_bus; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - mptable_write_buses(mc, NULL, &isa_bus); -/*I/O APICs: APIC ID Version State Address*/ - smp_write_ioapic(mc, 8, 0x20, VIO_APIC_VADDR); - { - device_t dev; - struct resource *res; - dev = dev_find_slot(1, PCI_DEVFN(0x1e,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, 0x09, 0x20, - res2mmio(res, 0, 0)); - } - } - dev = dev_find_slot(1, PCI_DEVFN(0x1c,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, 0x0a, 0x20, - res2mmio(res, 0, 0)); - } - } - } - mptable_add_isa_interrupts(mc, isa_bus, 0x8, 0); - -/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# -*/ -//USB - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x7c, 0x8, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x7d, 0x8, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x74, 0x8, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x75, 0x8, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x77, 0x8, 0x17); - -//onboard ati - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, 0x8, 0x8, 0x12); - -//onboard intel 82551 10/100 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, 0x4, 0x8, 0x11); - -// onboard Intel 82547 1000 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x4, 0xa, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x5, 0xa, 0x1); - -//Slot 4 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x3<<2)|0, 0x8, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x3<<2)|1, 0x8, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x3<<2)|2, 0x8, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x3<<2)|3, 0x8, 0x11); -//Slot 3 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x4<<2)|0, 0x8, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x4<<2)|1, 0x8, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x4<<2)|2, 0x8, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x4<<2)|3, 0x8, 0x12); -//Slot 1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x3<<2)|0, 0x9, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x3<<2)|1, 0x9, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x3<<2)|2, 0x9, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x3<<2)|3, 0x9, 0x3); -//Slot 2 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x6<<2)|0, 0x9, 0x4); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x6<<2)|1, 0x9, 0x5); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x6<<2)|2, 0x9, 0x6); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x6<<2)|3, 0x9, 0x7); - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, 0x0); -/* -MP Config Extended Table Entries: - --- -System Address Space - bus ID: 0 address type: I/O address - address base: 0x9000 - address range: 0x6000 --- -System Address Space - bus ID: 0 address type: I/O address - address base: 0x0 - address range: 0x100 --- -System Address Space - bus ID: 0 address type: memory address - address base: 0xa0000 - address range: 0x20000 --- -System Address Space - bus ID: 0 address type: memory address - address base: 0xfc700000 - address range: 0x2500000 --- -System Address Space - bus ID: 0 address type: prefetch address - address base: 0xff600000 - address range: 0x500000 --- -Bus Heirarchy - bus ID: 5 bus info: 0x01 parent bus ID: 0-- -Compatibility Bus Address - bus ID: 0 address modifier: add - predefined range: 0x00000000-- -Compatibility Bus Address - bus ID: 0 address modifier: add - predefined range: 0x00000001 // There is no extension information... -*/ - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/tyan/s2735/romstage.c b/src/mainboard/tyan/s2735/romstage.c deleted file mode 100644 index 514aa61..0000000 --- a/src/mainboard/tyan/s2735/romstage.c +++ /dev/null @@ -1,76 +0,0 @@ -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <lib.h> -#include <spd.h> -#include "southbridge/intel/i82801ex/early_smbus.c" -#include <northbridge/intel/e7501/raminit.h> -#include "northbridge/intel/e7501/debug.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include <cpu/x86/bist.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -// FIXME: There's another hard_reset() in reset.c. Why? -static void hard_reset(void) -{ - /* full reset */ - outb(0x0a, 0x0cf9); - outb(0x0e, 0x0cf9); -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/intel/e7501/raminit.c" -#include "northbridge/intel/e7501/reset_test.c" -#include "lib/generic_sdram.c" - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - static const struct mem_controller memctrl[] = { - { - .d0 = PCI_DEV(0, 0, 0), - .d0f1 = PCI_DEV(0, 0, 1), - .channel0 = { DIMM0, DIMM1, DIMM2, 0 }, - .channel1 = { DIMM4, DIMM5, DIMM6, 0 }, - }, - }; - - if (bist == 0) - enable_lapic(); - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - if (bios_reset_detected()) - hard_reset(); - - enable_smbus(); -#if 0 - dump_spd_registers(&memctrl[0]); - dump_smbus_registers(); -#endif - - sdram_initialize(1, memctrl); - -#if 0 - dump_pci_devices(); -#endif - -#if 1 - dump_pci_device(PCI_DEV(0, 0, 0)); -#endif -}

1 0

Patch merged into coreboot/master: [REMOVAL] drivers/trident/blade3d
by gerrit＠coreboot.org 10 Nov '15

10 Nov '15

the following patch was just integrated into master: commit a2d131511ffc6dcac1df391690acc66fc7c40954 Author: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Date: Mon Nov 9 13:38:50 2015 -0800 [REMOVAL] drivers/trident/blade3d As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: I180fd548e8f45fc94e5086159c0e3e9465c74598 Signed-off-by: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Reviewed-on: http://review.coreboot.org/12386 Reviewed-by: Ronald G. Minnich <rminnich(a)gmail.com> Tested-by: build bot (Jenkins) See http://review.coreboot.org/12386 for details. -gerrit

1 0

Patch merged into coreboot/master: [REMOVAL] iwill/dk8x
by gerrit＠coreboot.org 10 Nov '15

10 Nov '15

the following patch was just integrated into master: commit bb3934c3c287715ee758ded30414a8ab301aef29 Author: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Date: Mon Nov 9 13:32:10 2015 -0800 [REMOVAL] iwill/dk8x As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: I1913ca75aa6f2a2c6b97d49faaabc16afd2799f5 Signed-off-by: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Reviewed-on: http://review.coreboot.org/12371 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth(a)google.com> See http://review.coreboot.org/12371 for details. -gerrit

1 0

Patch merged into coreboot/master: [REMOVAL] newisys/khepri
by gerrit＠coreboot.org 10 Nov '15

10 Nov '15

the following patch was just integrated into master: commit b38e9a962e061d119089b2a52133d8f1bbed2ffb Author: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Date: Mon Nov 9 13:32:54 2015 -0800 [REMOVAL] newisys/khepri As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: If0e0a7f69b77cf4bcab4c0dcb58a153485380069 Signed-off-by: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Reviewed-on: http://review.coreboot.org/12373 Reviewed-by: Martin Roth <martinroth(a)google.com> Tested-by: build bot (Jenkins) See http://review.coreboot.org/12373 for details. -gerrit

1 0

Patch merged into coreboot/master: [REMOVAL] ibm/e325 + ibm/e326
by gerrit＠coreboot.org 10 Nov '15

10 Nov '15

the following patch was just integrated into master: commit 43f6fd3827e6c67471b5de646ea9709b6778056f Author: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Date: Mon Nov 9 13:31:23 2015 -0800 [REMOVAL] ibm/e325 + ibm/e326 As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: I8854c31f242c13b6f91901452f7eb7ce0ef0b255 Signed-off-by: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Reviewed-on: http://review.coreboot.org/12370 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth(a)google.com> See http://review.coreboot.org/12370 for details. -gerrit

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit November 2015