Change in ...coreboot[master]: mainboard/intel/cannonlake_rvp: Enable SaGv config

[Patrick Georgi (Code Review)]

Patrick Georgi has submitted this change and it was merged. ( https://review.coreboot.org/c/coreboot/+/31132 )

Change subject: mainboard/intel/cannonlake_rvp: Enable SaGv config
......................................................................

mainboard/intel/cannonlake_rvp: Enable SaGv config

This patch enables SaGv on Intel CNL-Y and CNL-U RVP board

Change-Id: I8a4b8a2a365caed304935bf0d66db9a92d10c23f
Signed-off-by: Ronak Kanabar 
Reviewed-on: https://review.coreboot.org/c/31132
Reviewed-by: Furquan Shaikh 
Reviewed-by: Pratikkumar V Prajapati 
Reviewed-by: Angel Pons 
Tested-by: build bot (Jenkins) 
---
M src/mainboard/intel/cannonlake_rvp/variants/cnl_u/devicetree.cb
M src/mainboard/intel/cannonlake_rvp/variants/cnl_y/devicetree.cb
2 files changed, 2 insertions(+), 2 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Furquan Shaikh: Looks good to me, approved
  Pratikkumar V Prajapati: Looks good to me, approved
  Angel Pons: Looks good to me, approved

diff --git a/src/mainboard/intel/cannonlake_rvp/variants/cnl_u/devicetree.cb b/src/mainboard/intel/cannonlake_rvp/variants/cnl_u/devicetree.cb
index 9604210..e5f867c 100644
--- a/src/mainboard/intel/cannonlake_rvp/variants/cnl_u/devicetree.cb
+++ b/src/mainboard/intel/cannonlake_rvp/variants/cnl_u/devicetree.cb
@@ -5,7 +5,7 @@
    end

# FSP configuration
-	register "SaGv" = "SaGv_FixedHigh"
+	register "SaGv" = "SaGv_Enabled"
    register "ScsEmmcHs400Enabled" = "1"

register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)"
diff --git a/src/mainboard/intel/cannonlake_rvp/variants/cnl_y/devicetree.cb b/src/mainboard/intel/cannonlake_rvp/variants/cnl_y/devicetree.cb
index e2ebaba..a6d329b 100644
--- a/src/mainboard/intel/cannonlake_rvp/variants/cnl_y/devicetree.cb
+++ b/src/mainboard/intel/cannonlake_rvp/variants/cnl_y/devicetree.cb
@@ -5,7 +5,7 @@
    end

# FSP configuration
-	register "SaGv" = "SaGv_FixedHigh"
+	register "SaGv" = "SaGv_Enabled"
    register "ScsEmmcHs400Enabled" = "1"

register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)"