Kyösti Mälkki (kyosti.malkki@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/5236
-gerrit
commit 933ebdab4f53d4599943d357f08b0d6ffc7da8c5 Author: Kyösti Mälkki kyosti.malkki@gmail.com Date: Thu Jan 30 15:45:16 2014 +0200
uart8250: Move under drivers/uart
Change-Id: Ic65ffaaa092330ed68d891e4a09a8b86cdc04a3a Signed-off-by: Kyösti Mälkki kyosti.malkki@gmail.com --- src/arch/x86/lib/romcc_console.c | 2 +- src/cpu/allwinner/a10/uart.c | 2 +- src/drivers/uart/Makefile.inc | 12 ++++ src/drivers/uart/uart8250io.c | 127 +++++++++++++++++++++++++++++++++++++ src/drivers/uart/uart8250mem.c | 134 +++++++++++++++++++++++++++++++++++++++ src/drivers/uart/uart8250reg.h | 108 +++++++++++++++++++++++++++++++ src/include/uart8250.h | 108 ------------------------------- src/lib/Makefile.inc | 6 -- src/lib/uart8250.c | 127 ------------------------------------- src/lib/uart8250mem.c | 134 --------------------------------------- 10 files changed, 383 insertions(+), 377 deletions(-)
diff --git a/src/arch/x86/lib/romcc_console.c b/src/arch/x86/lib/romcc_console.c index 1ed498a..66c81db 100644 --- a/src/arch/x86/lib/romcc_console.c +++ b/src/arch/x86/lib/romcc_console.c @@ -32,7 +32,7 @@
#if CONFIG_CONSOLE_SERIAL8250 #include "drivers/uart/util.c" -#include "lib/uart8250.c" +#include "drivers/uart/uart8250io.c" #endif #if CONFIG_CONSOLE_NE2K #include "drivers/net/ne2k.c" diff --git a/src/cpu/allwinner/a10/uart.c b/src/cpu/allwinner/a10/uart.c index 97ac302..7dad1ca 100644 --- a/src/cpu/allwinner/a10/uart.c +++ b/src/cpu/allwinner/a10/uart.c @@ -7,7 +7,7 @@
#include "uart.h" #include <arch/io.h> -#include <uart8250.h> +#include <drivers/uart/uart8250reg.h>
/** * \brief Configure line control settings for UART diff --git a/src/drivers/uart/Makefile.inc b/src/drivers/uart/Makefile.inc index 52a7024..3a9ca3d 100644 --- a/src/drivers/uart/Makefile.inc +++ b/src/drivers/uart/Makefile.inc @@ -5,6 +5,18 @@ bootblock-y += util.c smm-y += util.c endif
+ifeq ($(CONFIG_CONSOLE_SERIAL8250),y) +romstage-y += uart8250io.c +ramstage-y += uart8250io.c +smm-y += uart8250io.c +endif + +ifeq ($(CONFIG_CONSOLE_SERIAL8250MEM),y) +romstage-y += uart8250mem.c +ramstage-y += uart8250mem.c +smm-y += uart8250mem.c +endif + ifeq ($(CONFIG_CONSOLE_SERIAL_UART),y)
ifeq ($(CONFIG_DRIVERS_UART_PL011),y) diff --git a/src/drivers/uart/uart8250io.c b/src/drivers/uart/uart8250io.c new file mode 100644 index 0000000..6c08ce2 --- /dev/null +++ b/src/drivers/uart/uart8250io.c @@ -0,0 +1,127 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2003 Eric Biederman + * Copyright (C) 2006-2010 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/uart.h> +#include <trace.h> +#include "uart8250reg.h" + +/* Should support 8250, 16450, 16550, 16550A type UARTs */ + +/* No reports of super-IOs that would use different clock for + * baudrate reference. */ +#define BAUDRATE_REFCLK 115200 + +/* Expected character delay at 1200bps is 9ms for a working UART + * and no flow-control. Assume UART as stuck if shift register + * or FIFO takes more than 50ms per character to appear empty. + * + * Estimated that inb() from UART takes 1 microsecond. + */ +#define SINGLE_CHAR_TIMEOUT (50 * 1000) +#define FIFO_TIMEOUT (16 * SINGLE_CHAR_TIMEOUT) + +static int uart8250_can_tx_byte(unsigned base_port) +{ + return inb(base_port + UART_LSR) & UART_LSR_THRE; +} + +static void uart8250_tx_byte(unsigned base_port, unsigned char data) +{ + unsigned long int i = SINGLE_CHAR_TIMEOUT; + while (i-- && !uart8250_can_tx_byte(base_port)); + outb(data, base_port + UART_TBR); +} + +static void uart8250_tx_flush(unsigned base_port) +{ + unsigned long int i = FIFO_TIMEOUT; + while (i-- && !(inb(base_port + UART_LSR) & UART_LSR_TEMT)); +} + +static int uart8250_can_rx_byte(unsigned base_port) +{ + return inb(base_port + UART_LSR) & UART_LSR_DR; +} + +static unsigned char uart8250_rx_byte(unsigned base_port) +{ + unsigned long int i = SINGLE_CHAR_TIMEOUT; + while (i-- && !uart8250_can_rx_byte(base_port)); + + if (i) + return inb(base_port + UART_RBR); + else + return 0x0; +} + +static void uart8250_init(unsigned base_port, unsigned divisor) +{ + DISABLE_TRACE; + /* Disable interrupts */ + outb(0x0, base_port + UART_IER); + /* Enable FIFOs */ + outb(UART_FCR_FIFO_EN, base_port + UART_FCR); + + /* assert DTR and RTS so the other end is happy */ + outb(UART_MCR_DTR | UART_MCR_RTS, base_port + UART_MCR); + + /* DLAB on */ + outb(UART_LCR_DLAB | CONFIG_TTYS0_LCS, base_port + UART_LCR); + + /* Set Baud Rate Divisor. 12 ==> 9600 Baud */ + outb(divisor & 0xFF, base_port + UART_DLL); + outb((divisor >> 8) & 0xFF, base_port + UART_DLM); + + /* Set to 3 for 8N1 */ + outb(CONFIG_TTYS0_LCS, base_port + UART_LCR); + ENABLE_TRACE; +} + +/* FIXME: Needs uart index from Kconfig. + * Already use array as a work-around for ROMCC. + */ +static const unsigned bases[1] = { CONFIG_TTYS0_BASE }; + +void uart_init(void) +{ + unsigned int div = uart_baudrate_divisor(BAUDRATE_REFCLK); + uart8250_init(bases[0], div); +} + +void uart_tx_byte(unsigned char data) +{ + uart8250_tx_byte(bases[0], data); +} + +unsigned char uart_rx_byte(void) +{ + return uart8250_rx_byte(bases[0]); +} + +int uart_can_rx_byte(void) +{ + return uart8250_can_rx_byte(bases[0]); +} + +void uart_tx_flush(void) +{ + uart8250_tx_flush(bases[0]); +} diff --git a/src/drivers/uart/uart8250mem.c b/src/drivers/uart/uart8250mem.c new file mode 100644 index 0000000..dded007 --- /dev/null +++ b/src/drivers/uart/uart8250mem.c @@ -0,0 +1,134 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2003 Eric Biederman + * Copyright (C) 2006-2010 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/uart.h> +#include <device/device.h> +#include <delay.h> +#include "uart8250reg.h" + +/* Should support 8250, 16450, 16550, 16550A type UARTs */ + +/* Expected character delay at 1200bps is 9ms for a working UART + * and no flow-control. Assume UART as stuck if shift register + * or FIFO takes more than 50ms per character to appear empty. + */ +#define SINGLE_CHAR_TIMEOUT (50 * 1000) +#define FIFO_TIMEOUT (16 * SINGLE_CHAR_TIMEOUT) + +static int uart8250_mem_can_tx_byte(unsigned base_port) +{ + return read8(base_port + UART_LSR) & UART_LSR_THRE; +} + +static void uart8250_mem_tx_byte(unsigned base_port, unsigned char data) +{ + unsigned long int i = SINGLE_CHAR_TIMEOUT; + while(i-- && !uart8250_mem_can_tx_byte(base_port)) + udelay(1); + write8(base_port + UART_TBR, data); +} + +static void uart8250_mem_tx_flush(unsigned base_port) +{ + unsigned long int i = FIFO_TIMEOUT; + while(i-- && !(read8(base_port + UART_LSR) & UART_LSR_TEMT)) + udelay(1); +} + +static int uart8250_mem_can_rx_byte(unsigned base_port) +{ + return read8(base_port + UART_LSR) & UART_LSR_DR; +} + +static unsigned char uart8250_mem_rx_byte(unsigned base_port) +{ + unsigned long int i = SINGLE_CHAR_TIMEOUT; + while(i-- && !uart8250_mem_can_rx_byte(base_port)) + udelay(1); + if (i) + return read8(base_port + UART_RBR); + else + return 0x0; +} + +static void uart8250_mem_init(unsigned base_port, unsigned divisor) +{ + /* Disable interrupts */ + write8(base_port + UART_IER, 0x0); + /* Enable FIFOs */ + write8(base_port + UART_FCR, UART_FCR_FIFO_EN); + + /* Assert DTR and RTS so the other end is happy */ + write8(base_port + UART_MCR, UART_MCR_DTR | UART_MCR_RTS); + + /* DLAB on */ + write8(base_port + UART_LCR, UART_LCR_DLAB | CONFIG_TTYS0_LCS); + + /* Set Baud Rate Divisor. 12 ==> 9600 Baud */ + write8(base_port + UART_DLL, divisor & 0xFF); + write8(base_port + UART_DLM, (divisor >> 8) & 0xFF); + + /* Set to 3 for 8N1 */ + write8(base_port + UART_LCR, CONFIG_TTYS0_LCS); +} + +void uart_init(void) +{ + u32 base = uart_platform_base(0); + if (!base) + return; + + unsigned int refclk = uart_platform_refclk(); + unsigned int div = uart_baudrate_divisor(refclk); + uart8250_mem_init(base, div); +} + +void uart_tx_byte(unsigned char data) +{ + u32 base = uart_platform_base(0); + if (!base) + return; + uart8250_mem_tx_byte(base, data); +} + +unsigned char uart_rx_byte(void) +{ + u32 base = uart_platform_base(0); + if (!base) + return 0xff; + return uart8250_mem_rx_byte(base); +} + +int uart_can_rx_byte(void) +{ + u32 base = uart_platform_base(0); + if (!base) + return 0; + return uart8250_mem_can_rx_byte(base); +} + +void uart_tx_flush(void) +{ + u32 base = uart_platform_base(0); + if (!base) + return; + uart8250_mem_tx_flush(base); +} diff --git a/src/drivers/uart/uart8250reg.h b/src/drivers/uart/uart8250reg.h new file mode 100644 index 0000000..cdfbb1b --- /dev/null +++ b/src/drivers/uart/uart8250reg.h @@ -0,0 +1,108 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2003 Eric Biederman + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef UART8250REG_H +#define UART8250REG_H + +/* Data */ +#define UART_RBR 0x00 +#define UART_TBR 0x00 + +/* Control */ +#define UART_IER 0x01 +#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ +#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ +#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ +#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ + +#define UART_IIR 0x02 +#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ +#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ + +#define UART_IIR_MSI 0x00 /* Modem status interrupt */ +#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ +#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ +#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ + +#define UART_FCR 0x02 +#define UART_FCR_FIFO_EN 0x01 /* Fifo enable */ +#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ +#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ +#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */ +#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */ +#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */ +#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */ +#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */ +#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */ + +#define UART_FCR_RXSR 0x02 /* Receiver soft reset */ +#define UART_FCR_TXSR 0x04 /* Transmitter soft reset */ + +#define UART_LCR 0x03 +#define UART_LCR_WLS_MSK 0x03 /* character length select mask */ +#define UART_LCR_WLS_5 0x00 /* 5 bit character length */ +#define UART_LCR_WLS_6 0x01 /* 6 bit character length */ +#define UART_LCR_WLS_7 0x02 /* 7 bit character length */ +#define UART_LCR_WLS_8 0x03 /* 8 bit character length */ +#define UART_LCR_STB 0x04 /* Number of stop Bits, off = 1, on = 1.5 or 2) */ +#define UART_LCR_PEN 0x08 /* Parity enable */ +#define UART_LCR_EPS 0x10 /* Even Parity Select */ +#define UART_LCR_STKP 0x20 /* Stick Parity */ +#define UART_LCR_SBRK 0x40 /* Set Break */ +#define UART_LCR_BKSE 0x80 /* Bank select enable */ +#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ + +#define UART_MCR 0x04 +#define UART_MCR_DTR 0x01 /* DTR */ +#define UART_MCR_RTS 0x02 /* RTS */ +#define UART_MCR_OUT1 0x04 /* Out 1 */ +#define UART_MCR_OUT2 0x08 /* Out 2 */ +#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ + +#define UART_MCR_DMA_EN 0x04 +#define UART_MCR_TX_DFR 0x08 + +#define UART_DLL 0x00 +#define UART_DLM 0x01 + +/* Status */ +#define UART_LSR 0x05 +#define UART_LSR_DR 0x01 /* Data ready */ +#define UART_LSR_OE 0x02 /* Overrun */ +#define UART_LSR_PE 0x04 /* Parity error */ +#define UART_LSR_FE 0x08 /* Framing error */ +#define UART_LSR_BI 0x10 /* Break */ +#define UART_LSR_THRE 0x20 /* Xmit holding register empty */ +#define UART_LSR_TEMT 0x40 /* Xmitter empty */ +#define UART_LSR_ERR 0x80 /* Error */ + +#define UART_MSR 0x06 +#define UART_MSR_DCD 0x80 /* Data Carrier Detect */ +#define UART_MSR_RI 0x40 /* Ring Indicator */ +#define UART_MSR_DSR 0x20 /* Data Set Ready */ +#define UART_MSR_CTS 0x10 /* Clear to Send */ +#define UART_MSR_DDCD 0x08 /* Delta DCD */ +#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ +#define UART_MSR_DDSR 0x02 /* Delta DSR */ +#define UART_MSR_DCTS 0x01 /* Delta CTS */ + +#define UART_SCR 0x07 +#define UART_SPR 0x07 + +#endif /* UART8250REG_H */ diff --git a/src/include/uart8250.h b/src/include/uart8250.h deleted file mode 100644 index c63153c..0000000 --- a/src/include/uart8250.h +++ /dev/null @@ -1,108 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2003 Eric Biederman - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef UART8250_H -#define UART8250_H - -/* Data */ -#define UART_RBR 0x00 -#define UART_TBR 0x00 - -/* Control */ -#define UART_IER 0x01 -#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ -#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ -#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ -#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ - -#define UART_IIR 0x02 -#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ -#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ - -#define UART_IIR_MSI 0x00 /* Modem status interrupt */ -#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ -#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ -#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ - -#define UART_FCR 0x02 -#define UART_FCR_FIFO_EN 0x01 /* Fifo enable */ -#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ -#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ -#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */ -#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */ -#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */ -#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */ -#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */ -#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */ - -#define UART_FCR_RXSR 0x02 /* Receiver soft reset */ -#define UART_FCR_TXSR 0x04 /* Transmitter soft reset */ - -#define UART_LCR 0x03 -#define UART_LCR_WLS_MSK 0x03 /* character length select mask */ -#define UART_LCR_WLS_5 0x00 /* 5 bit character length */ -#define UART_LCR_WLS_6 0x01 /* 6 bit character length */ -#define UART_LCR_WLS_7 0x02 /* 7 bit character length */ -#define UART_LCR_WLS_8 0x03 /* 8 bit character length */ -#define UART_LCR_STB 0x04 /* Number of stop Bits, off = 1, on = 1.5 or 2) */ -#define UART_LCR_PEN 0x08 /* Parity enable */ -#define UART_LCR_EPS 0x10 /* Even Parity Select */ -#define UART_LCR_STKP 0x20 /* Stick Parity */ -#define UART_LCR_SBRK 0x40 /* Set Break */ -#define UART_LCR_BKSE 0x80 /* Bank select enable */ -#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ - -#define UART_MCR 0x04 -#define UART_MCR_DTR 0x01 /* DTR */ -#define UART_MCR_RTS 0x02 /* RTS */ -#define UART_MCR_OUT1 0x04 /* Out 1 */ -#define UART_MCR_OUT2 0x08 /* Out 2 */ -#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ - -#define UART_MCR_DMA_EN 0x04 -#define UART_MCR_TX_DFR 0x08 - -#define UART_DLL 0x00 -#define UART_DLM 0x01 - -/* Status */ -#define UART_LSR 0x05 -#define UART_LSR_DR 0x01 /* Data ready */ -#define UART_LSR_OE 0x02 /* Overrun */ -#define UART_LSR_PE 0x04 /* Parity error */ -#define UART_LSR_FE 0x08 /* Framing error */ -#define UART_LSR_BI 0x10 /* Break */ -#define UART_LSR_THRE 0x20 /* Xmit holding register empty */ -#define UART_LSR_TEMT 0x40 /* Xmitter empty */ -#define UART_LSR_ERR 0x80 /* Error */ - -#define UART_MSR 0x06 -#define UART_MSR_DCD 0x80 /* Data Carrier Detect */ -#define UART_MSR_RI 0x40 /* Ring Indicator */ -#define UART_MSR_DSR 0x20 /* Data Set Ready */ -#define UART_MSR_CTS 0x10 /* Clear to Send */ -#define UART_MSR_DDCD 0x08 /* Delta DCD */ -#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ -#define UART_MSR_DDSR 0x02 /* Delta DSR */ -#define UART_MSR_DCTS 0x01 /* Delta CTS */ - -#define UART_SCR 0x07 -#define UART_SPR 0x07 - -#endif /* UART8250_H */ diff --git a/src/lib/Makefile.inc b/src/lib/Makefile.inc index 5c37329..6641318 100644 --- a/src/lib/Makefile.inc +++ b/src/lib/Makefile.inc @@ -46,8 +46,6 @@ romstage-y += cbfs.c romstage-$(CONFIG_COMPRESS_RAMSTAGE) += lzma.c #romstage-y += lzmadecode.c romstage-$(CONFIG_CACHE_AS_RAM) += ramtest.c -romstage-$(CONFIG_CONSOLE_SERIAL8250) += uart8250.c -romstage-$(CONFIG_CONSOLE_SERIAL8250MEM) += uart8250mem.c
ifeq ($(CONFIG_EARLY_CBMEM_INIT),y) romstage-$(CONFIG_COLLECT_TIMESTAMPS) += timestamp.c @@ -87,8 +85,6 @@ ramstage-y += stack.c ramstage-$(CONFIG_ARCH_X86) += gcc.c ramstage-y += clog2.c romstage-y += clog2.c -ramstage-$(CONFIG_CONSOLE_SERIAL8250) += uart8250.c -ramstage-$(CONFIG_CONSOLE_SERIAL8250MEM) += uart8250mem.c ramstage-$(CONFIG_CONSOLE_CBMEM) += cbmem_console.c ramstage-$(CONFIG_BOOTSPLASH) += jpeg.c ramstage-$(CONFIG_TRACE) += trace.c @@ -125,8 +121,6 @@ ifneq ($(CONFIG_HAVE_ARCH_MEMMOVE),y) smm-y += memmove.c endif smm-y += cbfs.c memcmp.c -smm-$(CONFIG_CONSOLE_SERIAL8250) += uart8250.c -smm-$(CONFIG_CONSOLE_SERIAL8250MEM) += uart8250mem.c smm-y += gcc.c
$(obj)/lib/version.ramstage.o : $(obj)/build.h diff --git a/src/lib/uart8250.c b/src/lib/uart8250.c deleted file mode 100644 index d5e845c..0000000 --- a/src/lib/uart8250.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2003 Eric Biederman - * Copyright (C) 2006-2010 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <console/uart.h> -#include <uart8250.h> -#include <trace.h> - -/* Should support 8250, 16450, 16550, 16550A type UARTs */ - -/* No reports of super-IOs that would use different clock for - * baudrate reference. */ -#define BAUDRATE_REFCLK 115200 - -/* Expected character delay at 1200bps is 9ms for a working UART - * and no flow-control. Assume UART as stuck if shift register - * or FIFO takes more than 50ms per character to appear empty. - * - * Estimated that inb() from UART takes 1 microsecond. - */ -#define SINGLE_CHAR_TIMEOUT (50 * 1000) -#define FIFO_TIMEOUT (16 * SINGLE_CHAR_TIMEOUT) - -static int uart8250_can_tx_byte(unsigned base_port) -{ - return inb(base_port + UART_LSR) & UART_LSR_THRE; -} - -static void uart8250_tx_byte(unsigned base_port, unsigned char data) -{ - unsigned long int i = SINGLE_CHAR_TIMEOUT; - while (i-- && !uart8250_can_tx_byte(base_port)); - outb(data, base_port + UART_TBR); -} - -static void uart8250_tx_flush(unsigned base_port) -{ - unsigned long int i = FIFO_TIMEOUT; - while (i-- && !(inb(base_port + UART_LSR) & UART_LSR_TEMT)); -} - -static int uart8250_can_rx_byte(unsigned base_port) -{ - return inb(base_port + UART_LSR) & UART_LSR_DR; -} - -static unsigned char uart8250_rx_byte(unsigned base_port) -{ - unsigned long int i = SINGLE_CHAR_TIMEOUT; - while (i-- && !uart8250_can_rx_byte(base_port)); - - if (i) - return inb(base_port + UART_RBR); - else - return 0x0; -} - -static void uart8250_init(unsigned base_port, unsigned divisor) -{ - DISABLE_TRACE; - /* Disable interrupts */ - outb(0x0, base_port + UART_IER); - /* Enable FIFOs */ - outb(UART_FCR_FIFO_EN, base_port + UART_FCR); - - /* assert DTR and RTS so the other end is happy */ - outb(UART_MCR_DTR | UART_MCR_RTS, base_port + UART_MCR); - - /* DLAB on */ - outb(UART_LCR_DLAB | CONFIG_TTYS0_LCS, base_port + UART_LCR); - - /* Set Baud Rate Divisor. 12 ==> 9600 Baud */ - outb(divisor & 0xFF, base_port + UART_DLL); - outb((divisor >> 8) & 0xFF, base_port + UART_DLM); - - /* Set to 3 for 8N1 */ - outb(CONFIG_TTYS0_LCS, base_port + UART_LCR); - ENABLE_TRACE; -} - -/* FIXME: Needs uart index from Kconfig. - * Already use array as a work-around for ROMCC. - */ -static const unsigned bases[1] = { CONFIG_TTYS0_BASE }; - -void uart_init(void) -{ - unsigned int div = uart_baudrate_divisor(BAUDRATE_REFCLK); - uart8250_init(bases[0], div); -} - -void uart_tx_byte(unsigned char data) -{ - uart8250_tx_byte(bases[0], data); -} - -unsigned char uart_rx_byte(void) -{ - return uart8250_rx_byte(bases[0]); -} - -int uart_can_rx_byte(void) -{ - return uart8250_can_rx_byte(bases[0]); -} - -void uart_tx_flush(void) -{ - uart8250_tx_flush(bases[0]); -} diff --git a/src/lib/uart8250mem.c b/src/lib/uart8250mem.c deleted file mode 100644 index fb471fb..0000000 --- a/src/lib/uart8250mem.c +++ /dev/null @@ -1,134 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2003 Eric Biederman - * Copyright (C) 2006-2010 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <console/uart.h> -#include <uart8250.h> -#include <device/device.h> -#include <delay.h> - -/* Should support 8250, 16450, 16550, 16550A type UARTs */ - -/* Expected character delay at 1200bps is 9ms for a working UART - * and no flow-control. Assume UART as stuck if shift register - * or FIFO takes more than 50ms per character to appear empty. - */ -#define SINGLE_CHAR_TIMEOUT (50 * 1000) -#define FIFO_TIMEOUT (16 * SINGLE_CHAR_TIMEOUT) - -static int uart8250_mem_can_tx_byte(unsigned base_port) -{ - return read8(base_port + UART_LSR) & UART_LSR_THRE; -} - -static void uart8250_mem_tx_byte(unsigned base_port, unsigned char data) -{ - unsigned long int i = SINGLE_CHAR_TIMEOUT; - while(i-- && !uart8250_mem_can_tx_byte(base_port)) - udelay(1); - write8(base_port + UART_TBR, data); -} - -static void uart8250_mem_tx_flush(unsigned base_port) -{ - unsigned long int i = FIFO_TIMEOUT; - while(i-- && !(read8(base_port + UART_LSR) & UART_LSR_TEMT)) - udelay(1); -} - -static int uart8250_mem_can_rx_byte(unsigned base_port) -{ - return read8(base_port + UART_LSR) & UART_LSR_DR; -} - -static unsigned char uart8250_mem_rx_byte(unsigned base_port) -{ - unsigned long int i = SINGLE_CHAR_TIMEOUT; - while(i-- && !uart8250_mem_can_rx_byte(base_port)) - udelay(1); - if (i) - return read8(base_port + UART_RBR); - else - return 0x0; -} - -static void uart8250_mem_init(unsigned base_port, unsigned divisor) -{ - /* Disable interrupts */ - write8(base_port + UART_IER, 0x0); - /* Enable FIFOs */ - write8(base_port + UART_FCR, UART_FCR_FIFO_EN); - - /* Assert DTR and RTS so the other end is happy */ - write8(base_port + UART_MCR, UART_MCR_DTR | UART_MCR_RTS); - - /* DLAB on */ - write8(base_port + UART_LCR, UART_LCR_DLAB | CONFIG_TTYS0_LCS); - - /* Set Baud Rate Divisor. 12 ==> 9600 Baud */ - write8(base_port + UART_DLL, divisor & 0xFF); - write8(base_port + UART_DLM, (divisor >> 8) & 0xFF); - - /* Set to 3 for 8N1 */ - write8(base_port + UART_LCR, CONFIG_TTYS0_LCS); -} - -void uart_init(void) -{ - u32 base = uart_platform_base(0); - if (!base) - return; - - unsigned int refclk = uart_platform_refclk(); - unsigned int div = uart_baudrate_divisor(refclk); - uart8250_mem_init(base, div); -} - -void uart_tx_byte(unsigned char data) -{ - u32 base = uart_platform_base(0); - if (!base) - return; - uart8250_mem_tx_byte(base, data); -} - -unsigned char uart_rx_byte(void) -{ - u32 base = uart_platform_base(0); - if (!base) - return 0xff; - return uart8250_mem_rx_byte(base); -} - -int uart_can_rx_byte(void) -{ - u32 base = uart_platform_base(0); - if (!base) - return 0; - return uart8250_mem_can_rx_byte(base); -} - -void uart_tx_flush(void) -{ - u32 base = uart_platform_base(0); - if (!base) - return; - uart8250_mem_tx_flush(base); -}
-
Kyösti Mälkki