Patch set updated for coreboot: mainboard/jetway/j7f2: Use tabs for indents

[HAOUAS Elyes]

HAOUAS Elyes ([e-mail]) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/16825

-gerrit

commit 2ced7c80861134fc5af8551f0bd7c054429bbb1e
Author: Elyes HAOUAS <[e-mail]>
Date:   Thu Sep 29 21:39:27 2016 +0200

    mainboard/jetway/j7f2: Use tabs for indents
    
    Change-Id: Id97981a05ce4af371c765c6950ed504557b0a584
    Signed-off-by: Elyes HAOUAS <[e-mail]>
---
 src/mainboard/jetway/j7f2/devicetree.cb | 120 ++++++++++++++++----------------
 1 file changed, 60 insertions(+), 60 deletions(-)

diff --git a/src/mainboard/jetway/j7f2/devicetree.cb b/src/mainboard/jetway/j7f2/devicetree.cb
index 3b99b9c..ce5589f 100644
--- a/src/mainboard/jetway/j7f2/devicetree.cb
+++ b/src/mainboard/jetway/j7f2/devicetree.cb
@@ -1,62 +1,62 @@
 chip northbridge/via/cn700			# Northbridge
-  device domain 0 on			# PCI domain
-    device pci 0.0 on end			# AGP Bridge
-    device pci 0.1 on end			# Error Reporting
-    device pci 0.2 on end			# Host Bus Control
-    device pci 0.3 on end			# Memory Controller
-    device pci 0.4 on end			# Power Management
-    device pci 0.7 on end			# V-Link Controller
-    device pci 1.0 on end			# PCI Bridge
-    chip southbridge/via/vt8237r		# Southbridge
-      # Enable both IDE channels.
-      register "ide0_enable" = "1"
-      register "ide1_enable" = "1"
-      # Both cables are 40pin.
-      register "ide0_80pin_cable" = "0"
-      register "ide1_80pin_cable" = "0"
-      register "fn_ctrl_lo" = "0x80"
-      register "fn_ctrl_hi" = "0x1d"
-      device pci a.0 on end			# Firewire
-      device pci f.0 on end			# SATA
-      device pci f.1 on end			# IDE
-      device pci 10.0 on end			# OHCI
-      device pci 10.1 on end			# OHCI
-      device pci 10.2 on end			# OHCI
-      device pci 10.3 on end			# OHCI
-      device pci 10.4 on end			# EHCI
-      device pci 11.0 on			# Southbridge LPC
-        chip superio/fintek/f71805f		# Super I/O
-          device pnp 2e.0 off			# Floppy
-            io 0x60 = 0x3f0
-            irq 0x70 = 6
-            drq 0x74 = 2
-          end
-          device pnp 2e.1 on			# Parallel Port
-            io 0x60 = 0x378
-            irq 0x70 = 7
-            drq 0x74 = 3
-          end
-          device pnp 2e.2 on			# COM1
-            io 0x60 = 0x3f8
-            irq 0x70 = 4
-          end
-          device pnp 2e.3 on			# COM2
-            io 0x60 = 0x2f8
-            irq 0x70 = 3
-          end
-          device pnp 2e.b on			# HWM
-            io 0x60 = 0xec00
-          end
-        end
-      end
-      device pci 11.5 on end			# AC'97 audio
-      # device pci 11.6 off end			# AC'97 Modem
-      device pci 12.0 on end			# Ethernet
-    end
-  end
-  device cpu_cluster 0 on			# APIC cluster
-    chip cpu/via/c7			# VIA C7
-      device lapic 0 on end			# APIC
-    end
-  end
+	device domain 0 on			# PCI domain
+		device pci 0.0 on end			# AGP Bridge
+		device pci 0.1 on end			# Error Reporting
+		device pci 0.2 on end			# Host Bus Control
+		device pci 0.3 on end			# Memory Controller
+		device pci 0.4 on end			# Power Management
+		device pci 0.7 on end			# V-Link Controller
+		device pci 1.0 on end			# PCI Bridge
+		chip southbridge/via/vt8237r		# Southbridge
+			# Enable both IDE channels.
+			register "ide0_enable" = "1"
+			register "ide1_enable" = "1"
+			# Both cables are 40pin.
+			register "ide0_80pin_cable" = "0"
+			register "ide1_80pin_cable" = "0"
+			register "fn_ctrl_lo" = "0x80"
+			register "fn_ctrl_hi" = "0x1d"
+			device pci a.0 on end			# Firewire
+			device pci f.0 on end			# SATA
+			device pci f.1 on end			# IDE
+			device pci 10.0 on end			# OHCI
+			device pci 10.1 on end			# OHCI
+			device pci 10.2 on end			# OHCI
+			device pci 10.3 on end			# OHCI
+			device pci 10.4 on end			# EHCI
+			device pci 11.0 on			# Southbridge LPC
+				chip superio/fintek/f71805f		# Super I/O
+					device pnp 2e.0 off		# Floppy
+						io 0x60 = 0x3f0
+						irq 0x70 = 6
+						drq 0x74 = 2
+					end
+					device pnp 2e.1 on		# Parallel Port
+						io 0x60 = 0x378
+						irq 0x70 = 7
+						drq 0x74 = 3
+					end
+					device pnp 2e.2 on		# COM1
+						io 0x60 = 0x3f8
+						irq 0x70 = 4
+					end
+					device pnp 2e.3 on		# COM2
+						io 0x60 = 0x2f8
+						irq 0x70 = 3
+					end
+					device pnp 2e.b on		# HWM
+						io 0x60 = 0xec00
+					end
+				end
+			end
+			device pci 11.5 on end			# AC'97 audio
+			# device pci 11.6 off end		# AC'97 Modem
+			device pci 12.0 on end			# Ethernet
+		end
+	end
+	device cpu_cluster 0 on			# APIC cluster
+		chip cpu/via/c7			# VIA C7
+			device lapic 0 on end		# APIC
+		end
+	end
 end