Patch set updated for coreboot: e574f12 i82801gx: remove wrong code from pci bridge init

[Mono Moosbart]

Mono Moosbart ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/7990

-gerrit

commit e574f12bfe12d109e140e8d6ae86c3d76a4bc500
Author: Axel Holewa 
Date:   Wed Dec 31 01:52:27 2014 +0100

i82801gx: remove wrong code from pci bridge init

This code uses missleading register name PCI_MIN_GNT defined in
    pci_def.h with 0x3e. However this device has no register with
    this name. Moreover, this device's register at offset 0x3e has
    the name BCTRL defined in i82801gx.h. Right above this removed
    code, in line 41-44, bits 0 and 1 at offset 0x3e (BCTRL) are
    cleared disabling Parity Error Response and SERR#. The removed
    code then enables SERR# and ISA.

Tested with printk and lspci.

Other southbridges maybe use the same wrong code (lynxpoint, bd82x6x).

Change-Id: I61270441a56067e4255c75d39428258dc39ffaef
    Signed-off-by: Axel Holewa 
---
 src/southbridge/intel/i82801gx/pci.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/src/southbridge/intel/i82801gx/pci.c b/src/southbridge/intel/i82801gx/pci.c
index 0f372e7..90d9107 100644
--- a/src/southbridge/intel/i82801gx/pci.c
+++ b/src/southbridge/intel/i82801gx/pci.c
@@ -49,9 +49,6 @@ static void pci_init(struct device *dev)
    reg8 |= (0x04 << 3);
    pci_write_config8(dev, SMLT, reg8);

-	/* Will this improve throughput of bus masters? */
-	pci_write_config8(dev, PCI_MIN_GNT, 0x06);
-
    /* Clear errors in status registers */
    reg16 = pci_read_config16(dev, PSTS);
    //reg16 |= 0xf900;