Patch set updated for coreboot: superio/it8772f: Add register to set the default value of FAN speed

[Matt DeVillier]

Matt DeVillier ([e-mail]) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/12799

-gerrit

commit 2f6ab98ca238e3743e2f5837f27f54ccda7b0a54
Author: Ted Kuo 
Date:   Fri Mar 27 18:59:07 2015 +0800

superio/it8772f: Add register to set the default value of FAN speed

Original-Signed-off-by: Ted Kuo

Change-Id: I70d7b572e9ae030136a39fb6fa933f486d559aef
    Original-Reviewed-on: https://chromium-review.googlesource.com/262832
    Original-Reviewed-by: Shawn N 
    Original-Commit-Queue: Ted Kuo 
    Original-Tested-by: Ted Kuo 
    Signed-off-by: Matt DeVillier 
---
 src/superio/ite/it8772f/chip.h    |  6 ++++++
 src/superio/ite/it8772f/superio.c | 22 ++++++++++++++--------
 2 files changed, 20 insertions(+), 8 deletions(-)

diff --git a/src/superio/ite/it8772f/chip.h b/src/superio/ite/it8772f/chip.h
index 2ceeee0..1d84850 100644
--- a/src/superio/ite/it8772f/chip.h
+++ b/src/superio/ite/it8772f/chip.h
@@ -48,6 +48,12 @@ struct superio_ite_it8772f_config {
    u8 fan1_enable;
    u8 fan2_enable;
    u8 fan3_enable;
+
+	/*
+	 * Default FAN speed
+	 */
+	u8 fan2_speed;
+	u8 fan3_speed;
 };

#endif /* SUPERIO_ITE_IT8772F_CHIP_H */
diff --git a/src/superio/ite/it8772f/superio.c b/src/superio/ite/it8772f/superio.c
index cac6898..2b891b2 100644
--- a/src/superio/ite/it8772f/superio.c
+++ b/src/superio/ite/it8772f/superio.c
@@ -137,7 +137,7 @@ static void it8772f_enable_tmpin(struct resource *res, int tmpin,
 /*
  * Setup a FAN PWM interface for software control
  */
-static void it8772f_enable_fan(struct resource *res, int fan)
+static void it8772f_enable_fan(struct resource *res, int fan, u8 fan_speed)
 {
    u8 reg;

@@ -165,8 +165,10 @@ static void it8772f_enable_fan(struct resource *res, int fan)
    	/* Disable Smoothing */
    	it8772f_envc_write(res, IT8772F_FAN_CTL2_AUTO_MODE,
    			   IT8772F_FAN_CTL_AUTO_SMOOTHING_DIS);
-		/* Set a default medium fan speed */
-		it8772f_envc_write(res, IT8772F_FAN_CTL2_PWM_START, 0x80);
+		/* Set a default fan speed */
+		if (fan_speed)
+			it8772f_envc_write(res, IT8772F_FAN_CTL2_PWM_START,
+				   fan_speed);
    	break;
    case 3:
    	/* Enable software operation */
@@ -175,8 +177,10 @@ static void it8772f_enable_fan(struct resource *res, int fan)
    	/* Disable Smoothing */
    	it8772f_envc_write(res, IT8772F_FAN_CTL3_AUTO_MODE,
    			   IT8772F_FAN_CTL_AUTO_SMOOTHING_DIS);
-		/* Set a default medium fan speed */
-		it8772f_envc_write(res, IT8772F_FAN_CTL3_PWM_START, 0x80);
+		/* Set a default fan speed */
+		if (fan_speed)
+			it8772f_envc_write(res, IT8772F_FAN_CTL3_PWM_START,
+				   fan_speed);
    	break;
    }
 }
@@ -206,11 +210,13 @@ static void it8772f_init(struct device *dev)

/* Enable FANx if configured */
    	if (conf->fan1_enable)
-			it8772f_enable_fan(res, 1);
+			it8772f_enable_fan(res, 1, 0);
    	if (conf->fan2_enable)
-			it8772f_enable_fan(res, 2);
+			it8772f_enable_fan(res, 2,
+				conf->fan2_speed ? conf->fan2_speed : 0x80);
    	if (conf->fan3_enable)
-			it8772f_enable_fan(res, 3);
+			it8772f_enable_fan(res, 3,
+				conf->fan3_speed ? conf->fan3_speed : 0x80);

/*
    	 * System may get wrong temperature data when SIO is in