[M] Change in coreboot[main]: util/superiotool/fintek: Add f81966 register table

[Felix Held (Code Review)]

Felix Held has submitted this change. ( https://review.coreboot.org/c/coreboot/+/83019?usp=email )

Change subject: util/superiotool/fintek: Add f81966 register table
......................................................................

util/superiotool/fintek: Add f81966 register table

In accordance with the F81962/F81964/F81966/F81967 datasheet:
Release Date: Feb, 2018, Version: V0.18P [1].

[1] https://web.archive.org/web/20240707052102/http://
www.jetwaycomputer.com/download/Fintek/F81966_wdt_gpio.zip

Change-Id: Ic3418c337883538e47eb181cbe1ad2dc828e12a1
Signed-off-by: Maxim Polyakov 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83019
Tested-by: build bot (Jenkins) 
Reviewed-by: Angel Pons 
---
M util/superiotool/fintek.c
1 file changed, 157 insertions(+), 2 deletions(-)

Approvals:
  Angel Pons: Looks good to me, approved
  build bot (Jenkins): Verified

diff --git a/util/superiotool/fintek.c b/util/superiotool/fintek.c
index 390e8e3..3abcc57 100644
--- a/util/superiotool/fintek.c
+++ b/util/superiotool/fintek.c
@@ -10,10 +10,10 @@

#define FINTEK_VENDOR_ID	0x3419

-/* f81866 Port Select (27h): BANK_PROG_SEL[3-2] CLK_TUNE_PROG_EN[0] */
+/* f81866 f81966 Port Select (27h): BANK_PROG_SEL[3-2] CLK_TUNE_PROG_EN[0] */
 #define ESEL_27H(bank, en)	{.name = "Port Select Register", .idx = 0x27, .mask = 0x0d, \
    	.val = esel_27h_##bank | esel_27h_clk_tune_##en}
-/* f81866 Fan Fault Time Register (9Fh): FAN_PROG_SEL[7] */
+/* f81866 f81966 Fan Fault Time Register (9Fh): FAN_PROG_SEL[7] */
 #define ESEL_9FH(bank)		{.name = "Fan Fault Time Register", .idx = 0x9f, .mask = 0x80, \
    	.val = esel_9fh_fan_prog_##bank}
 /* f81866 Block Write Count Register (ECh) ECh: MCH_BANK_SEL[7] */
@@ -565,6 +565,105 @@
    		{NANA, 0x00, 0x00, NANA, NANA, 0x04, NANA, 0x00, 0x00, 0x00, EOT}},
    	{EOT}}},
    {0x0215, "F81962/F81964/F81966/F81967", {
+		{NOLDN, "Global",
+			{0x02, 0x07, 0x20, 0x21, 0x23, 0x24, 0x25, 0x26, 0x27, 0x28, 0x29,
+			 0x2a, 0x2b, 0x2c, 0x2d, EOT},
+			{NANA, 0x00, 0x15, 0x02, 0x19, 0x34, 0x00, 0x23, 0x02, 0xa0, 0x00,
+			 0x00, 0x02, 0x0c, 0x28, EOT},
+			ESEL_27H(bank0, dis)}, /* selectable */
+		{NOLDN, "Global",
+			{0x27, 0x28, 0x2a, 0x2b, 0x2c, EOT},
+			{0x02, 0x00, 0x00, 0x00, 0x00, EOT},
+			ESEL_27H(bank1, dis)}, /* selectable */
+		{NOLDN, "Global",
+			{0x27, 0x28, 0x2a, 0x2b, 0x2c, EOT},
+			{0x02, 0x03, 0x60, 0x00, 0x00, EOT},
+			ESEL_27H(bank2, dis)}, /* selectable */
+		{NOLDN, "Global",
+			{0x27, 0x28, 0x2a, 0x2b, 0x2c, EOT},
+			{0x02, 0x5b, 0x03, 0x00, 0x18, EOT},
+			ESEL_27H(bank3, dis)}, /* selectable */
+		{NOLDN, "Global",
+			{0x27, 0x29, 0x2c, 0x2b, 0x2c, EOT},
+			{0x02, 0x03, 0xe7, NANA, 0x00, EOT},
+			ESEL_27H(bank0, en)}, /* selectable */
+		{0x03, "LPT",
+			{0x30, 0x60, 0x61, 0x70, 0x74, 0xf0, EOT},
+			{NANA, 0x03, 0x78, 0x07, 0x03, 0xc2, EOT}},
+		{0x04, "HWMON",
+			{0x30, 0x60, 0x61, 0x70, EOT},
+			{NANA, 0x02, 0x95, NANA, EOT}},
+		{0x05, "KBC",
+			{0x30, 0x60, 0x61, 0x70, 0x72, 0xfe, EOT},
+			{NANA, 0x00, 0x60, NANA, NANA, 0x00, EOT}},
+		{0x06, "GPIO",
+			{0x30, 0x60, 0x61, 0x70, 0x71, 0x72, 0x73, 0x7e, 0x7f,
+			 0xf0, 0xf1, 0xf2, 0xf3, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, /* f0...f8 GPIO0 */
+			 0xe0, 0xe1, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, /* e0...e6 GPIO1 */
+			 0xd0, 0xd1, 0xd2, /* d0...d2 GPIO2 */
+			 0xc0, 0xc1, 0xc2, 0xc3, /* c0...c3 GPIO3 */
+			 0xb0, 0xb1, 0xb2, 0xb3, /* b0...b3 GPIO4 */
+			 0xa0, 0xa1, 0xa2, 0xa4, 0xa5, 0xa6, /* a0...c6 GPIO5 */
+			 0x90, 0x91, 0x92, 0x93, /* 90...93 GPIO6 */
+			 0x80, 0x81, 0x82, 0x83, /* 80...83 GPIO7 */
+			 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, /* 88...8e GPIO8 */
+			 0x98, 0x99, 0x9a, 0x9b, /* 98...9b GPIO9 */
+			 EOT},
+			{NANA, 0x00, 0x60, NANA, NANA, NANA, NANA, 0x00, 0x00,
+			 0x00, 0x0f, NANA, 0x00, 0x00, 0x00, 0xff, 0x00, 0x00, 0x00, /* f0...f8 GPIO0 */
+			 0x00, 0xff, NANA, 0x00, 0x00, 0xff, 0x00, /* e0...e6 GPIO1 */
+			 0x00, 0xff, NANA, /* d0...d2 GPIO2 */
+			 0x00, 0xff, NANA, 0x00, /* c0...c3 GPIO3 */
+			 0x00, 0xff, NANA, 0x00, /* b0...b3 GPIO4 */
+			 0x00, 0xff, NANA, 0x00, 0xff, 0x00, /* a0...c6 GPIO5 */
+			 0x00, 0xff, NANA, 0x00, /* 90...93 GPIO6 */
+			 0x00, 0xff, NANA, 0x00, /* 80...83 GPIO7 */
+			 0x00, 0xff, NANA, 0x00, 0x00, 0xff, 0x00, /* 88...8e GPIO8 */
+			 0x00, 0xff, NANA, 0x00, /* 98...9b GPIO9 */
+			 EOT}},
+		{0x07, "WDT",
+			{0x30, 0x60, 0x61, 0xf0, 0xf5, 0xf6, 0xfa, EOT},
+			{NANA, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, EOT}},
+		{0x0a, "PME, ACPI & ERP",
+			{0x30, 0xe0, 0xe1, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9,
+			 0xec, 0xed, 0xee, 0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf8,
+			 0xf9, 0xfa, 0xfc, 0xfd, 0xfe, EOT},
+			{NANA, 0x00, 0x0c, 0x8c, 0x13, 0x09, 0xc7, 0x09, 0x63, 0x00, 0x0f,
+			 0x14, 0x00, 0x00, 0x00, NANA, 0x00, NANA, 0x07, 0x1c, 0x00, 0x00,
+			 0x00, 0x00, 0x07, 0x00, 0x00, EOT}},
+		{0x0f, "SPI Master",
+			{0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, EOT},
+			{0x00, 0x00, 0x00, 0x00, 0x00, 0x03, EOT}},
+		{0x10, "UART1",
+			{0x30, 0x60, 0x61, 0x70, 0xf0, 0xf2, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8,
+			 0xfe, 0xff, EOT},
+			{NANA, 0x03, 0xf8, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			 0x00, 0xff, EOT}},
+		{0x11, "UART2",
+			{0x30, 0x60, 0x61, 0x70, 0xf0, 0xf2, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8,
+			 0xfe, 0xff, EOT},
+			{NANA, 0x02, 0xf8, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			 0x00, 0xff, EOT}},
+		{0x12, "UART3",
+			{0x30, 0x60, 0x61, 0x70, 0xf0, 0xf2, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8,
+			 0xfe, 0xff, EOT},
+			{NANA, 0x03, 0xe8, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			 0x00, 0xff, EOT}},
+		{0x13, "UART4",
+			{0x30, 0x60, 0x61, 0x70, 0xf0, 0xf2, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8,
+			 0xfe, 0xff, EOT},
+			{NANA, 0x02, 0xe8, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			 0x00, 0xff, EOT}},
+		{0x14, "UART5",
+			{0x30, 0x60, 0x61, 0x70, 0xf0, 0xf2, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8,
+			 0xfe, 0xff, EOT},
+			{NANA, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			 0x00, 0xff, EOT}},
+		{0x15, "UART6",
+			{0x30, 0x60, 0x61, 0x70, 0xf0, 0xf2, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8,
+			 0xfe, 0xff, EOT},
+			{NANA, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			 0x00, 0xff, EOT}},
    	{EOT}}},
    {EOT}
 };
@@ -687,6 +786,62 @@
    		{0x0f, 0xff, 0x00, 0x01, 0x03, 0xff, 0x3c, 0x32, 0x28, 0x1e, 0xff,
    		 0xd9, 0xb2, 0x99, 0x80, 0x1d, EOT}},
    	{EOT}}},
+	{0x0215, "F81804/F81962/F81964/F81966/F81967", {
+		{NOLDN, "General", /* 5.4.6 Hardware Monitor General Setting & 5.4.13 PECI/TSI/I2C Setting */
+			{0x01, 0x02, 0x03, 0x04, 0x05, 0x07, 0x08, 0x09, 0x0a, 0x0b, 0x0c,
+			 0x0d, 0x0e, 0x0f, EOT},
+			{0x03, 0x00, 0x00, 0x00, 0x00, 0x4a, 0x4c, 0x00, 0x00, 0x00, 0x55,
+			 0x00, 0x00, 0x02, EOT}},
+		{NOLDN, "PECI Command", /* 5.4.22 PECI Command Setting */
+			{0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, 0x4a,
+			 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, EOT},
+			{0x44, 0x00, NANA, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			 0x00, 0x00, 0x00, 0x00, 0x00, EOT}},
+		{NOLDN, "TSI/MXM", /* 5.4.39 TSI/MXM Temperature */
+			{0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, 0x5a,
+			 0x5b, 0x5c, 0x5d, 0x5e, 0x5f, EOT},
+			{NANA, NANA, NANA, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			 0x00, 0x00, NANA, 0x01, 0x00, EOT}},
+		{NOLDN, "Temperature Monitor", /* 5.4.56 Temperature Related Register */
+			{0x60, 0x61, 0x62, 0x63, 0x64, 0x66, 0x6b, 0x6c, 0x6d, 0x6f, 0x7f,
+			 0x72, 0x74, 0x7a, 0x7b, 0x7e, 0x80, 0x81, 0x82, 0x83, 0x84, 0x85,
+			 EOT},
+			{0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x06, 0x44, 0x04, NANA, 0x00,
+			 NANA, NANA, NANA, NANA, NANA, 0x46, 0x3c, 0x64, 0x55, 0x64, 0x55,
+			 EOT}},
+		{NOLDN, "Voltage Monitor", /* 5.4.69 Voltage Setting */
+			{0x10, 0x11, 0x12, 0x14, 0x15, 0x16, 0x17, 0x20, 0x21, 0x22, 0x23,
+			 0x24, 0x25, 0x26, 0x27, 0x2d, 0x2e, 0x2f, 0x30, 0x31, 0x36, 0x37,
+			 0x38, 0x39, 0x3a, 0x3f, EOT},
+			{0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, NANA, NANA, NANA, NANA,
+			 NANA, NANA, NANA, NANA, NANA, NANA, NANA, 0x89, 0xf2, 0xe2, 0xe1,
+			 0x83, 0x96, 0xff, 0x00, EOT}},
+		{NOLDN, "FAN Control", /* 5.4.79 General Fan Control Setting */
+			{0x90, 0x91, 0x92, 0x93, 0x94, 0x96, 0x97, 0x98, 0x99, 0x9a, 0x9b,
+			 0x9c, 0x9d, 0x9e, 0x9f, EOT},
+			{0x00, NANA, NANA, 0x00, 0x00, 0x15, 0x00, 0x44, 0x02, 0x00, 0x15,
+			 0x55, 0x05, 0x66, 0x0a, EOT},
+			ESEL_9FH(bank0)}, /* selectable */
+		{NOLDN, "FAN Control",
+			{0x94, 0x95, 0x96, 0x97, 0x9a, 0x9b, EOT},
+			{0x00, 0x00, 0x00, 0x00, 0x00, 0x15, EOT},
+			ESEL_9FH(bank1)}, /* selectable */
+		{NOLDN, "FAN1 Monitor", /* 5.4.101 FAN1 Control Register */
+			{0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa,
+			 0xab, 0xac, 0xad, 0xae, 0xaf, EOT},
+			{0x0f, 0xff, 0x00, 0x80, 0x03, 0xff, 0x3c, 0x32, 0x28, 0x1e, 0xff,
+			 0xd9, 0xb2, 0x99, 0x80, 0x1d, EOT}},
+		{NOLDN, "FAN2 Monitor", /* 5.4.101 FAN1 Control Register */
+			{0xb0, 0xb1, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6, 0xb7, 0xb8, 0xb9, 0xba,
+			 0xbb, 0xbc, 0xbd, 0xbe, 0xbf, EOT},
+			{0x0f, 0xff, 0x00, 0x80, 0x03, 0xff, 0x3c, 0x32, 0x28, 0x1e, 0xff,
+			 0xd9, 0xb2, 0x99, 0x80, 0x1d, EOT}},
+		{NOLDN, "FAN3 Monitor", /* 5.4.101 FAN1 Control Register */
+			{0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca,
+			 0xcb, 0xcc, 0xcd, 0xce, 0xcf, EOT},
+			{0x0f, 0xff, 0x00, 0x80, 0x03, 0xff, 0x3c, 0x32, 0x28, 0x1e, 0xff,
+			 0xd9, 0xb2, 0x99, 0x80, 0x1d, EOT}},
+		{EOT}}},
    {EOT}
 };