[XS] Change in coreboot[main]: mb/google/nissa/var/pujjoga: Modify P sensor setting

[Felix Held (Code Review)]

Felix Held has submitted this change. ( https://review.coreboot.org/c/coreboot/+/83794?usp=email )

(

5 is the latest approved patch-set.
No files were changed between the latest approved patch-set and the submitted one.
 )Change subject: mb/google/nissa/var/pujjoga: Modify P sensor setting
......................................................................

mb/google/nissa/var/pujjoga: Modify P sensor setting

1. The P sensor need follow WWAN FW_CONFIG to enable/disable

2. Modify GPP_H19 setting to PAD_CFG_GPI_APIC to fix PLT test fail

Schematic version: 500E_GEN4S_ADL_N_MB_0418

BUG=b:357998089
TEST=1. Boot to OS and verify the P sensor devices is set based on
fw_config.
2. Confirm that the PLT test can pass successfully.

Change-Id: Ic3610180c8cf99eba9367e26bfc3666410af19f7
Signed-off-by: Leo Chou 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83794
Tested-by: build bot (Jenkins) 
Reviewed-by: Subrata Banik 
---
M src/mainboard/google/brya/variants/pujjoga/gpio.c
M src/mainboard/google/brya/variants/pujjoga/overridetree.cb
2 files changed, 5 insertions(+), 3 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Subrata Banik: Looks good to me, approved

diff --git a/src/mainboard/google/brya/variants/pujjoga/gpio.c b/src/mainboard/google/brya/variants/pujjoga/gpio.c
index cf5c9bd..2950605 100644
--- a/src/mainboard/google/brya/variants/pujjoga/gpio.c
+++ b/src/mainboard/google/brya/variants/pujjoga/gpio.c
@@ -44,8 +44,8 @@
    PAD_CFG_NF(GPP_H15, NONE, DEEP, NF1),
    /* H17  : DDPB_CTRLDATA */
    PAD_CFG_NF(GPP_H17, NONE, DEEP, NF1),
-	/* H19  : SOC_I2C_SUB_INT_ODL */
-	PAD_CFG_GPI_LOCK(GPP_H19, NONE, LOCK_CONFIG),
+	/* H19 : SOC_I2C_SUB_INT_ODL */
+	PAD_CFG_GPI_APIC(GPP_H19, NONE, PLTRST, LEVEL, NONE),
    /* H21  : WWAN_PERST_L */
    PAD_NC_LOCK(GPP_H21, NONE, LOCK_CONFIG),
    /* H22  : WCAM_MCLK_R ==> NC */
diff --git a/src/mainboard/google/brya/variants/pujjoga/overridetree.cb b/src/mainboard/google/brya/variants/pujjoga/overridetree.cb
index 789e578..8877c41 100644
--- a/src/mainboard/google/brya/variants/pujjoga/overridetree.cb
+++ b/src/mainboard/google/brya/variants/pujjoga/overridetree.cb
@@ -303,7 +303,9 @@
    			register "int_comp_resistor" = ""lowest""
    			register "input_precharge_resistor_ohms" = "4000"
    			register "input_analog_gain" = "1"
-				device i2c 28 on end
+				device i2c 28 on
+					probe WWAN LTE_PRESENT
+				end
    		end
    	end
    	device ref i2c3 on