Change in coreboot[master]: driver/i2c: Add sx9360 driver

[Gwendal Grignou (Code Review)]

Attention is currently required from: SH Kim, Paul Menzel, Tim Wawrzynczak.
Hello build bot (Jenkins), Tim Wawrzynczak, SH Kim,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/59608

to look at the new patch set (#3).

Change subject: driver/i2c: Add sx9360 driver
......................................................................

driver/i2c: Add sx9360 driver

Add driver for setting up Semtech sx9360 SAR sensor.

Registers are documented in the kernel tree:
Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml

Signed-off-by: Seunghwan Kim 
Signed-off-by: Gwendal Grignou 
Change-Id: I0a912f184e6f3501f894cca24c0d71a2c3087516
---
A src/drivers/i2c/sx9360/Kconfig
A src/drivers/i2c/sx9360/Makefile.inc
A src/drivers/i2c/sx9360/chip.h
A src/drivers/i2c/sx9360/sx9360.c
4 files changed, 158 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/08/59608/3