[S] Change in coreboot[main]: drivers/uart: Replace 'unsigned long int' by 'unsigned long'

[Ariel Otilibili (Code Review)]

Ariel Otilibili has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/85784?usp=email )

Change subject: drivers/uart: Replace 'unsigned long int' by 'unsigned long'
......................................................................

drivers/uart: Replace 'unsigned long int' by 'unsigned long'

As suggested by the linter:

Prefer 'unsigned long' over 'unsigned long int' as the int is unnecessary

Link: https://qa.coreboot.org/job/coreboot-untested-files/lastSuccessfulBuild/arti...
Change-Id: I1416a2f7d75a888dcaf0775894aced981800866f
Signed-off-by: Ariel Otilibili 
---
M src/drivers/uart/uart8250io.c
M src/drivers/uart/uart8250mem.c
2 files changed, 6 insertions(+), 6 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/84/85784/1

diff --git a/src/drivers/uart/uart8250io.c b/src/drivers/uart/uart8250io.c
index a7fc346..89ec229 100644
--- a/src/drivers/uart/uart8250io.c
+++ b/src/drivers/uart/uart8250io.c
@@ -26,14 +26,14 @@

static void uart8250_tx_byte(unsigned int base_port, unsigned char data)
 {
-	unsigned long int i = SINGLE_CHAR_TIMEOUT;
+	unsigned long i = SINGLE_CHAR_TIMEOUT;
    while (i-- && !uart8250_can_tx_byte(base_port));
    outb(data, base_port + UART8250_TBR);
 }

static void uart8250_tx_flush(unsigned int base_port)
 {
-	unsigned long int i = FIFO_TIMEOUT;
+	unsigned long i = FIFO_TIMEOUT;
    while (i-- && !(inb(base_port + UART8250_LSR) & UART8250_LSR_TEMT));
 }

@@ -44,7 +44,7 @@

static unsigned char uart8250_rx_byte(unsigned int base_port)
 {
-	unsigned long int i = SINGLE_CHAR_TIMEOUT;
+	unsigned long i = SINGLE_CHAR_TIMEOUT;
    while (i && !uart8250_can_rx_byte(base_port))
    	i--;

diff --git a/src/drivers/uart/uart8250mem.c b/src/drivers/uart/uart8250mem.c
index 19677a8..fcf031e 100644
--- a/src/drivers/uart/uart8250mem.c
+++ b/src/drivers/uart/uart8250mem.c
@@ -46,7 +46,7 @@

static void uart8250_mem_tx_byte(void *base, unsigned char data)
 {
-	unsigned long int i = SINGLE_CHAR_TIMEOUT;
+	unsigned long i = SINGLE_CHAR_TIMEOUT;
    while (i-- && !uart8250_mem_can_tx_byte(base))
    	udelay(1);
    uart8250_write(base, UART8250_TBR, data);
@@ -54,7 +54,7 @@

static void uart8250_mem_tx_flush(void *base)
 {
-	unsigned long int i = FIFO_TIMEOUT;
+	unsigned long i = FIFO_TIMEOUT;
    while (i-- && !(uart8250_read(base, UART8250_LSR) & UART8250_LSR_TEMT))
    	udelay(1);
 }
@@ -66,7 +66,7 @@

static unsigned char uart8250_mem_rx_byte(void *base)
 {
-	unsigned long int i = SINGLE_CHAR_TIMEOUT;
+	unsigned long i = SINGLE_CHAR_TIMEOUT;
    while (i && !uart8250_mem_can_rx_byte(base)) {
    	udelay(1);
    	i--;