[M] Change in coreboot[main]: mb/google/zork: Update FP enable

[Jon Murphy (Code Review)]

Attention is currently required from: Jason Nien, Jon Murphy, Martin Roth.

Hello Jason Nien, Karthik Ramasubramanian, Martin Roth, build bot (Jenkins),

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/85294?usp=email

to look at the new patch set (#5).

Change subject: mb/google/zork: Update FP enable
......................................................................

mb/google/zork: Update FP enable

Add/update FP enable/disable based on SKU ID. This is meant
to resolve a UMA issue with devices that had the FPMCU populated on
non-fp devices.  Since the FPMCU is present, and the firmware enables
the power GPIO's based on variant, not SKU, the devices were reporting
data on fingerprint errantly.  Specify the SKUs which should not have a
FP sensor and default to true to maintain the legacy behavior for
undefined devices and limit risk.  Variants which do not have FP SKUs
will be unaffected.

BUG=b:354769653
TEST=Flash to zork, test FP.
Disable test SKU, flash on zork, test FP.

To test, run `ectool --name=cros_fp version` in the shell
When enabled, the fpmcu fw version should be displayed.
When disabled, an error should be displayed because the fpmcu
is inaccessible.

Change-Id: Ic6dc71013a1c0d5ee5263109eed87a1b31800232
Signed-off-by: Jon Murphy 
---
M src/mainboard/google/zork/variants/berknip/variant.c
M src/mainboard/google/zork/variants/morphius/variant.c
2 files changed, 112 insertions(+), 23 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/94/85294/5