[S] Change in coreboot[main]: superio/ite/it8728f: Support setting power state after power failure

[Vladimir Serbinenko (Code Review)]

Attention is currently required from: Paul Menzel.

Vladimir Serbinenko has posted comments on this change by Vladimir Serbinenko. ( https://review.coreboot.org/c/coreboot/+/82737?usp=email )

Change subject: superio/ite/it8728f: Support setting power state after power failure
......................................................................

Patch Set 1:

(3 comments)

Commit Message:

https://review.coreboot.org/c/coreboot/+/82737/comment/2bbba2cb_f31164c1?usp... :
PS1, Line 7: it8728f
> superio/ite/it8728f

Done

https://review.coreboot.org/c/coreboot/+/82737/comment/bcec83fc_258ad704?usp... :
PS1, Line 9: Tested on GA-H61M-S2PV
> Maybe mention power_on_after_fail

Done

File src/superio/ite/it8728f/superio.c:

https://review.coreboot.org/c/coreboot/+/82737/comment/9f4bec1e_2c9346c2?usp... :
PS1, Line 42: if (power_status == MAINBOARD_POWER_ON)
            : 			byte_f4 |= 0x20;
> Please add {} around the branch, as at least one other branch uses them.

Done