Subrata Banik has submitted this change. ( https://review.coreboot.org/c/coreboot/+/83665?usp=email )
Change subject: mb/google/brya/var/trulo: Remove unused Bluetooth device ......................................................................
mb/google/brya/var/trulo: Remove unused Bluetooth device
This change removes the configuration for the unused USB2 Port 6 (index 5) and its associated Bluetooth device on the Trulo variant.
BUG=b:351976770 TEST=Builds successfully for google/trulo.
Change-Id: I9970274b9b1b1076a2f9d649d61c825cac71d0c7 Signed-off-by: Subrata Banik subratabanik@google.com Reviewed-on: https://review.coreboot.org/c/coreboot/+/83665 Reviewed-by: Eric Lai ericllai@google.com Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: Rishika Raj rishikaraj@google.com --- M src/mainboard/google/brya/variants/trulo/overridetree.cb 1 file changed, 0 insertions(+), 8 deletions(-)
Approvals: build bot (Jenkins): Verified Rishika Raj: Looks good to me, but someone else must approve Eric Lai: Looks good to me, approved
diff --git a/src/mainboard/google/brya/variants/trulo/overridetree.cb b/src/mainboard/google/brya/variants/trulo/overridetree.cb index 8f63cc3..a9be57c 100644 --- a/src/mainboard/google/brya/variants/trulo/overridetree.cb +++ b/src/mainboard/google/brya/variants/trulo/overridetree.cb @@ -87,7 +87,6 @@ register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # USB2_A1 (DB) register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # M.2 Camera register "usb2_ports[4]" = "USB2_PORT_TYPE_C(OC_SKIP)" # USB2_C0 (MLB) - register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC1)" # USB3/2 Type A port A0 (MLB) register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3/2 Type A port A1 (DB) @@ -447,13 +446,6 @@ device ref usb2_port5 on end end chip drivers/usb/acpi - register "desc" = ""USB2 Bluetooth"" - register "type" = "UPC_TYPE_INTERNAL" - register "reset_gpio" = - "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A13)" - device ref usb2_port6 on end - end - chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port A0 (MLB)"" register "type" = "UPC_TYPE_USB3_A" register "use_custom_pld" = "true"