Vladimir Serbinenko (phcoder@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2995
-gerrit
commit 92ba16cf9fabcf478c225dff687ae717666b502d Author: Vladimir Serbinenko phcoder@gmail.com Date: Sun Mar 31 22:22:10 2013 +0200
intel/bd82x6x: Support mobile 5 southbridge
Adjust bd82x6x to support mobile 5 revision as well. Successfully tested on Lenovo X201.
Change-Id: I18054cf7edae92f2d8776561661d5b87599ece25 Signed-off-by: Vladimir Serbinenko phcoder@gmail.com --- src/mainboard/google/parrot/devicetree.cb | 11 ++ src/mainboard/intel/emeraldlake2/devicetree.cb | 11 ++ src/mainboard/samsung/lumpy/devicetree.cb | 11 ++ src/mainboard/samsung/stumpy/devicetree.cb | 11 ++ src/southbridge/intel/bd82x6x/Kconfig | 20 ++++ src/southbridge/intel/bd82x6x/Makefile.inc | 1 + src/southbridge/intel/bd82x6x/azalia.c | 2 +- src/southbridge/intel/bd82x6x/chip.h | 49 +++++++++ src/southbridge/intel/bd82x6x/early_smbus.c | 15 +++ src/southbridge/intel/bd82x6x/lpc.c | 103 +++++++++++++++++- src/southbridge/intel/bd82x6x/me.c | 17 ++- src/southbridge/intel/bd82x6x/me.h | 1 + src/southbridge/intel/bd82x6x/pch.h | 47 ++------ src/southbridge/intel/bd82x6x/sata.c | 46 +++++--- src/southbridge/intel/bd82x6x/smbus.c | 2 +- src/southbridge/intel/bd82x6x/smbus.h | 144 +++++++++++++++++++++++++ src/southbridge/intel/bd82x6x/spi.c | 3 +- src/southbridge/intel/bd82x6x/thermal.c | 84 +++++++++++++++ src/southbridge/intel/bd82x6x/usb_debug.c | 9 +- src/southbridge/intel/bd82x6x/usb_ehci.c | 41 ++++--- 20 files changed, 549 insertions(+), 79 deletions(-)
diff --git a/src/mainboard/google/parrot/devicetree.cb b/src/mainboard/google/parrot/devicetree.cb index cd65fbf..32d7c54 100644 --- a/src/mainboard/google/parrot/devicetree.cb +++ b/src/mainboard/google/parrot/devicetree.cb @@ -64,6 +64,17 @@ chip northbridge/intel/sandybridge register "ide_legacy_combined" = "0x0" register "sata_ahci" = "0x1" register "sata_port_map" = "0x1" + register "sata_irq_line" = "0xa" + register "ide_tim_pri" = "IDE_DECODE_ENABLE | IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS | IDE_PPE0 | IDE_IE0 | IDE_TIME0" + register "ide_sdma_cnt" = "IDE_PSDE0" + register "ide_sdma_tim" = "0x0001" + register "ide_config" = "SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0" + register "set98" = "0" + register "sir4" = "0x00001600" + register "sir28" = "0xa0000033" + register "sir54" = "0x5555aa" + register "sir64" = "0xcccc8484" + register "sir88" = "0x88338822"
# EC range is 0xFD60 (EC_IO) and 0x68/0x6C register "gen1_dec" = "0x0004fd61" diff --git a/src/mainboard/intel/emeraldlake2/devicetree.cb b/src/mainboard/intel/emeraldlake2/devicetree.cb index 0bb42d6..cf82e45 100644 --- a/src/mainboard/intel/emeraldlake2/devicetree.cb +++ b/src/mainboard/intel/emeraldlake2/devicetree.cb @@ -53,6 +53,17 @@ chip northbridge/intel/sandybridge register "ide_legacy_combined" = "0x0" register "sata_ahci" = "0x1" register "sata_port_map" = "0x3f" + register "sata_irq_line" = "0xa" + register "ide_tim_pri" = "IDE_DECODE_ENABLE | IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS | IDE_PPE0 | IDE_IE0 | IDE_TIME0" + register "ide_sdma_cnt" = "IDE_PSDE0" + register "ide_sdma_tim" = "0x0001" + register "ide_config" = "SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0" + register "set98" = "0" + register "sir4" = "0x00001600" + register "sir28" = "0xa0000033" + register "sir54" = "0x5555aa" + register "sir64" = "0xcccc8484" + register "sir88" = "0x88338822"
# SuperIO range is 0x700-0x73f register "gen2_dec" = "0x003c0701" diff --git a/src/mainboard/samsung/lumpy/devicetree.cb b/src/mainboard/samsung/lumpy/devicetree.cb index cdd7a5c..26b6d73 100644 --- a/src/mainboard/samsung/lumpy/devicetree.cb +++ b/src/mainboard/samsung/lumpy/devicetree.cb @@ -62,6 +62,17 @@ chip northbridge/intel/sandybridge register "ide_legacy_combined" = "0x0" register "sata_ahci" = "0x1" register "sata_port_map" = "0x1" + register "sata_irq_line" = "0xa" + register "ide_tim_pri" = "IDE_DECODE_ENABLE | IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS | IDE_PPE0 | IDE_IE0 | IDE_TIME0" + register "ide_sdma_cnt" = "IDE_PSDE0" + register "ide_sdma_tim" = "0x0001" + register "ide_config" = "SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0" + register "set98" = "0" + register "sir4" = "0x00001600" + register "sir28" = "0xa0000033" + register "sir54" = "0x5555aa" + register "sir64" = "0xcccc8484" + register "sir88" = "0x88338822"
# EC range is 0xa00-0xa3f register "gen1_dec" = "0x003c0a01" diff --git a/src/mainboard/samsung/stumpy/devicetree.cb b/src/mainboard/samsung/stumpy/devicetree.cb index ee01e8a..cf308e9 100644 --- a/src/mainboard/samsung/stumpy/devicetree.cb +++ b/src/mainboard/samsung/stumpy/devicetree.cb @@ -52,6 +52,17 @@ chip northbridge/intel/sandybridge register "ide_legacy_combined" = "0x0" register "sata_ahci" = "0x1" register "sata_port_map" = "0x3" + register "sata_irq_line" = "0xa" + register "ide_tim_pri" = "IDE_DECODE_ENABLE | IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS | IDE_PPE0 | IDE_IE0 | IDE_TIME0" + register "ide_sdma_cnt" = "IDE_PSDE0" + register "ide_sdma_tim" = "0x0001" + register "ide_config" = "SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0" + register "set98" = "0" + register "sir4" = "0x00001600" + register "sir28" = "0xa0000033" + register "sir54" = "0x5555aa" + register "sir64" = "0xcccc8484" + register "sir88" = "0x88338822"
# SuperIO range is 0x700-0x73f register "gen2_dec" = "0x003c0701" diff --git a/src/southbridge/intel/bd82x6x/Kconfig b/src/southbridge/intel/bd82x6x/Kconfig index 5dd492c..71881f3 100644 --- a/src/southbridge/intel/bd82x6x/Kconfig +++ b/src/southbridge/intel/bd82x6x/Kconfig @@ -72,4 +72,24 @@ config LOCK_MANAGEMENT_ENGINE
If unsure, say N.
+config USBDEBUG_DEV + int + default 29 + +config USBDEBUG_FUNC + int + default 7 + +config USBDEBUG_DEFAULT_PORT + int + default 2 + +config IO_APIC_ID + int + default 2 + +config PMCON_RAMINIT_REVERSED + int + default 1 + endif diff --git a/src/southbridge/intel/bd82x6x/Makefile.inc b/src/southbridge/intel/bd82x6x/Makefile.inc index bc3ff4b..366b7e4 100644 --- a/src/southbridge/intel/bd82x6x/Makefile.inc +++ b/src/southbridge/intel/bd82x6x/Makefile.inc @@ -33,6 +33,7 @@ ramstage-y += usb_xhci.c ramstage-y += me.c ramstage-y += me_8.x.c ramstage-y += smbus.c +ramstage-y += thermal.c
ramstage-y += me_status.c ramstage-y += reset.c diff --git a/src/southbridge/intel/bd82x6x/azalia.c b/src/southbridge/intel/bd82x6x/azalia.c index 2d854a4..17141d6 100644 --- a/src/southbridge/intel/bd82x6x/azalia.c +++ b/src/southbridge/intel/bd82x6x/azalia.c @@ -362,7 +362,7 @@ static struct device_operations azalia_ops = { .ops_pci = &azalia_pci_ops, };
-static const unsigned short pci_device_ids[] = { 0x1c20, 0x1e20, 0 }; +static const unsigned short pci_device_ids[] = { 0x1c20, 0x1e20, 0x3b56, 0 };
static const struct pci_driver pch_azalia __pci_driver = { .ops = &azalia_ops, diff --git a/src/southbridge/intel/bd82x6x/chip.h b/src/southbridge/intel/bd82x6x/chip.h index 828466c..96d0b02 100644 --- a/src/southbridge/intel/bd82x6x/chip.h +++ b/src/southbridge/intel/bd82x6x/chip.h @@ -20,6 +20,44 @@ #ifndef SOUTHBRIDGE_INTEL_BD82X6X_CHIP_H #define SOUTHBRIDGE_INTEL_BD82X6X_CHIP_H
+#define IDE_DECODE_ENABLE (1 << 15) +#define IDE_SITRE (1 << 14) +#define IDE_ISP_5_CLOCKS (0 << 12) +#define IDE_ISP_4_CLOCKS (1 << 12) +#define IDE_ISP_3_CLOCKS (2 << 12) +#define IDE_RCT_4_CLOCKS (0 << 8) +#define IDE_RCT_3_CLOCKS (1 << 8) +#define IDE_RCT_2_CLOCKS (2 << 8) +#define IDE_RCT_1_CLOCKS (3 << 8) +#define IDE_DTE1 (1 << 7) +#define IDE_PPE1 (1 << 6) +#define IDE_IE1 (1 << 5) +#define IDE_TIME1 (1 << 4) +#define IDE_DTE0 (1 << 3) +#define IDE_PPE0 (1 << 2) +#define IDE_IE0 (1 << 1) +#define IDE_TIME0 (1 << 0) + +#define SIG_MODE_SEC_NORMAL (0 << 18) +#define SIG_MODE_SEC_TRISTATE (1 << 18) +#define SIG_MODE_SEC_DRIVELOW (2 << 18) +#define SIG_MODE_PRI_NORMAL (0 << 16) +#define SIG_MODE_PRI_TRISTATE (1 << 16) +#define SIG_MODE_PRI_DRIVELOW (2 << 16) +#define FAST_SCB1 (1 << 15) +#define FAST_SCB0 (1 << 14) +#define FAST_PCB1 (1 << 13) +#define FAST_PCB0 (1 << 12) +#define SCB1 (1 << 3) +#define SCB0 (1 << 2) +#define PCB1 (1 << 1) +#define PCB0 (1 << 0) + +#define IDE_SSDE1 (1 << 3) +#define IDE_SSDE0 (1 << 2) +#define IDE_PSDE1 (1 << 1) +#define IDE_PSDE0 (1 << 0) + struct southbridge_intel_bd82x6x_config { /** * Interrupt Routing configuration @@ -69,6 +107,17 @@ struct southbridge_intel_bd82x6x_config { uint8_t sata_port_map; uint32_t sata_port0_gen3_tx; uint32_t sata_port1_gen3_tx; + uint8_t sata_irq_line; + uint16_t ide_tim_pri; + uint32_t ide_config; + uint16_t ide_sdma_cnt; + uint16_t ide_sdma_tim; + uint32_t sir4; + uint32_t sir28; + uint32_t sir54; + uint32_t sir64; + uint32_t sir88; + int set98;
/** * SATA Interface Speed Support Configuration diff --git a/src/southbridge/intel/bd82x6x/early_smbus.c b/src/southbridge/intel/bd82x6x/early_smbus.c index 9de97e7..d8aff92 100644 --- a/src/southbridge/intel/bd82x6x/early_smbus.c +++ b/src/southbridge/intel/bd82x6x/early_smbus.c @@ -60,3 +60,18 @@ int smbus_read_byte(unsigned device, unsigned address) return do_smbus_read_byte(SMBUS_IO_BASE, device, address); }
+int smbus_write_byte(unsigned device, unsigned address, u8 data) +{ + return do_smbus_write_byte(SMBUS_IO_BASE, device, address, data); +} + +int smbus_block_read(unsigned device, unsigned cmd, u8 bytes, u8 *buf) +{ + return do_smbus_block_read(SMBUS_IO_BASE, device, cmd, bytes, buf); +} + +int smbus_block_write(unsigned device, unsigned cmd, u8 bytes, const u8 *buf) +{ + return do_smbus_block_write(SMBUS_IO_BASE, device, cmd, bytes, buf); +} + diff --git a/src/southbridge/intel/bd82x6x/lpc.c b/src/southbridge/intel/bd82x6x/lpc.c index df37ddc..835f0c8 100644 --- a/src/southbridge/intel/bd82x6x/lpc.c +++ b/src/southbridge/intel/bd82x6x/lpc.c @@ -52,7 +52,7 @@ static void pch_enable_apic(struct device *dev) pci_write_config8(dev, ACPI_CNTL, 0x80);
*ioapic_index = 0; - *ioapic_data = (1 << 25); + *ioapic_data = (CONFIG_IO_APIC_ID << 24);
/* affirm full set of redirection table entries ("write once") */ *ioapic_index = 1; @@ -63,7 +63,7 @@ static void pch_enable_apic(struct device *dev) *ioapic_index = 0; reg32 = *ioapic_data; printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", (reg32 >> 24) & 0x0f); - if (reg32 != (1 << 25)) + if (reg32 != (CONFIG_IO_APIC_ID << 24)) die("APIC Error\n");
printk(BIOS_SPEW, "Dumping IOAPIC registers\n"); @@ -391,6 +391,96 @@ static void ppt_pm_init(struct device *dev) RCBA32_AND_OR(0x21b0, ~0UL, 0xf); }
+static void mobile5_pm_init(struct device *dev) +{ + int i; + + printk(BIOS_DEBUG, "Mobile 5 PM init\n"); + pci_write_config8(dev, 0xa9, 0x47); + + RCBA32 (0x1d44) = 0x00000000; + (void) RCBA32 (0x1d44); + RCBA32 (0x1d48) = 0x00030000; + (void) RCBA32 (0x1d48); + RCBA32 (0x1e80) = 0x000c0801; + (void) RCBA32 (0x1e80); + RCBA32 (0x1e84) = 0x000200f0; + (void) RCBA32 (0x1e84); + + const u32 rcba2010[] = + { + /* 2010: */ 0x00188200, 0x14000016, 0xbc4abcb5, 0x00000000, + /* 2020: */ 0xf0c9605b, 0x13683040, 0x04c8f16e, 0x09e90170 + }; + for (i = 0; i < sizeof (rcba2010) / sizeof (rcba2010[0]); i++) + { + RCBA32 (0x2010 + 4 * i) = rcba2010[i]; + RCBA32 (0x2010 + 4 * i); + } + + RCBA32 (0x2100) = 0x00000000; + (void) RCBA32 (0x2100); + RCBA32 (0x2104) = 0x00000757; + (void) RCBA32 (0x2104); + RCBA32 (0x2108) = 0x00170001; + (void) RCBA32 (0x2108); + + RCBA32 (0x211c) = 0x00000000; + (void) RCBA32 (0x211c); + RCBA32 (0x2120) = 0x00010000; + (void) RCBA32 (0x2120); + + RCBA32 (0x21fc) = 0x00000000; + (void) RCBA32 (0x21fc); + RCBA32 (0x2200) = 0x20000044; + (void) RCBA32 (0x2200); + RCBA32 (0x2204) = 0x00000001; + (void) RCBA32 (0x2204); + RCBA32 (0x2208) = 0x00003457; + (void) RCBA32 (0x2208); + + const u32 rcba2210[] = + { + /* 2210 */ 0x00000000, 0x00000001, 0xa0fff210, 0x0000df00, + /* 2220 */ 0x00e30880, 0x00000070, 0x00004000, 0x00000000, + /* 2230 */ 0x00e30880, 0x00000070, 0x00004000, 0x00000000, + /* 2240 */ 0x00002301, 0x36000000, 0x00010107, 0x00160000, + /* 2250 */ 0x00001b01, 0x36000000, 0x00010107, 0x00160000, + /* 2260 */ 0x00000601, 0x16000000, 0x00010107, 0x00160000, + /* 2270 */ 0x00001c01, 0x16000000, 0x00010107, 0x00160000 + }; + + for (i = 0; i < sizeof (rcba2210) / sizeof (rcba2210[0]); i++) + { + RCBA32 (0x2210 + 4 * i) = rcba2210[i]; + RCBA32 (0x2210 + 4 * i); + } + + const u32 rcba2300[] = + { + /* 2300: */ 0x00000000, 0x40000000, 0x4646827b, 0x6e803131, + /* 2310: */ 0x32c77887, 0x00077733, 0x00007447, 0x00000040, + /* 2320: */ 0xcccc0cfc, 0x0fbb0fff + }; + + for (i = 0; i < sizeof (rcba2300) / sizeof (rcba2300[0]); i++) + { + RCBA32 (0x2300 + 4 * i) = rcba2300[i]; + RCBA32 (0x2300 + 4 * i); + } + + RCBA32 (0x37fc) = 0x00000000; + (void) RCBA32 (0x37fc); + RCBA32 (0x3dfc) = 0x00000000; + (void) RCBA32 (0x3dfc); + RCBA32 (0x3e7c) = 0xffffffff; + (void) RCBA32 (0x3e7c); + RCBA32 (0x3efc) = 0x00000000; + (void) RCBA32 (0x3efc); + RCBA32 (0x3f00) = 0x0000010b; + (void) RCBA32 (0x3f00); +} + static void enable_hpet(void) { u32 reg32; @@ -503,12 +593,14 @@ static void pch_disable_smm_only_flashing(struct device *dev)
static void pch_fixups(struct device *dev) { +#if CONFIG_PMCON_RAMINIT_REVERSED u8 gen_pmcon_2;
/* Indicate DRAM init done for MRC S3 to know it can resume */ gen_pmcon_2 = pci_read_config8(dev, GEN_PMCON_2); gen_pmcon_2 |= (1 << 7); pci_write_config8(dev, GEN_PMCON_2, gen_pmcon_2); +#endif
/* * Enable DMI ASPM in the PCH @@ -537,6 +629,9 @@ static void lpc_init(struct device *dev) /* Set the value for PCI command register. */ pci_write_config16(dev, PCI_COMMAND, 0x000f);
+ if (pch_silicon_type() == PCH_TYPE_MOBILE5) + mobile5_pm_init (dev); + /* IO APIC initialization. */ pch_enable_apic(dev);
@@ -556,6 +651,8 @@ static void lpc_init(struct device *dev) case PCH_TYPE_PPT: /* PantherPoint */ ppt_pm_init(dev); break; + case PCH_TYPE_MOBILE5: + break; default: printk(BIOS_ERR, "Unknown Chipset: 0x%04x\n", dev->device); } @@ -700,7 +797,7 @@ static const unsigned short pci_device_ids[] = { 0x1c46, 0x1c47, 0x1c49, 0x1c4a, 0x1c4b, 0x1c4c, 0x1c4d, 0x1c4e, 0x1c4f, 0x1c50, 0x1c52, 0x1c54, 0x1e55, 0x1c56, 0x1e57, 0x1c5c, - 0x1e5d, 0x1e5e, 0x1e5f, + 0x1e5d, 0x1e5e, 0x1e5f, 0x3b07, 0 };
static const struct pci_driver pch_lpc __pci_driver = { diff --git a/src/southbridge/intel/bd82x6x/me.c b/src/southbridge/intel/bd82x6x/me.c index 7fdf926..123fc73 100644 --- a/src/southbridge/intel/bd82x6x/me.c +++ b/src/southbridge/intel/bd82x6x/me.c @@ -724,10 +724,13 @@ static void intel_me_init(device_t dev) break;
#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG) - /* Print ME firmware version */ - mkhi_get_fw_version(); - /* Print ME firmware capabilities */ - mkhi_get_fwcaps(); + if (dev->device == 0x1c3a) + { + /* Print ME firmware version */ + mkhi_get_fw_version(); + /* Print ME firmware capabilities */ + mkhi_get_fwcaps(); + } #endif
/* @@ -768,10 +771,14 @@ static struct device_operations device_ops = { .ops_pci = &pci_ops, };
+static const unsigned short pci_device_ids[] = { 0x1c3a, 0x3b64, + 0 }; + + static const struct pci_driver intel_me __pci_driver = { .ops = &device_ops, .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x1c3a, + .devices = pci_device_ids };
#endif /* !__SMM__ */ diff --git a/src/southbridge/intel/bd82x6x/me.h b/src/southbridge/intel/bd82x6x/me.h index aaeb24d..6e2062d 100644 --- a/src/southbridge/intel/bd82x6x/me.h +++ b/src/southbridge/intel/bd82x6x/me.h @@ -194,6 +194,7 @@ struct mei_header { #define MKHI_MDES_ENABLE 0x09
#define MKHI_GET_FW_VERSION 0x02 +#define MKHI_SET_UMA 0x08 #define MKHI_END_OF_POST 0x0c #define MKHI_FEATURE_OVERRIDE 0x14
diff --git a/src/southbridge/intel/bd82x6x/pch.h b/src/southbridge/intel/bd82x6x/pch.h index 7f64571..f533bc4 100644 --- a/src/southbridge/intel/bd82x6x/pch.h +++ b/src/southbridge/intel/bd82x6x/pch.h @@ -22,8 +22,9 @@ #define SOUTHBRIDGE_INTEL_BD82X6X_PCH_H
/* PCH types */ -#define PCH_TYPE_CPT 0x1c /* CougarPoint */ -#define PCH_TYPE_PPT 0x1e /* IvyBridge */ +#define PCH_TYPE_CPT 0x1c /* CougarPoint */ +#define PCH_TYPE_PPT 0x1e /* IvyBridge */ +#define PCH_TYPE_MOBILE5 0x3b
/* PCH stepping values for LPC device */ #define PCH_STEP_A0 0 @@ -73,6 +74,9 @@ void pch_log_state(void); void enable_smbus(void); void enable_usb_bar(void); int smbus_read_byte(unsigned device, unsigned address); +int smbus_write_byte(unsigned device, unsigned address, u8 data); +int smbus_block_read(unsigned device, unsigned cmd, u8 bytes, u8 *buf); +int smbus_block_write(unsigned device, unsigned cmd, u8 bytes, const u8 *buf); int early_spi_read(u32 offset, u32 size, u8 *buffer); #endif #endif @@ -150,54 +154,22 @@ int early_spi_read(u32 offset, u32 size, u8 *buffer); #define LPC_GEN3_DEC 0x8c /* LPC IF Generic Decode Range 3 */ #define LPC_GEN4_DEC 0x90 /* LPC IF Generic Decode Range 4 */
+#define SKPAD_ACPI_S3_MAGIC 0xcafed00d +#define SKPAD_NORMAL_BOOT_MAGIC 0xcafebabe + /* PCI Configuration Space (D31:F1): IDE */ #define PCH_IDE_DEV PCI_DEV(0, 0x1f, 1) #define PCH_SATA_DEV PCI_DEV(0, 0x1f, 2) #define PCH_SATA2_DEV PCI_DEV(0, 0x1f, 5) #define INTR_LN 0x3c #define IDE_TIM_PRI 0x40 /* IDE timings, primary */ -#define IDE_DECODE_ENABLE (1 << 15) -#define IDE_SITRE (1 << 14) -#define IDE_ISP_5_CLOCKS (0 << 12) -#define IDE_ISP_4_CLOCKS (1 << 12) -#define IDE_ISP_3_CLOCKS (2 << 12) -#define IDE_RCT_4_CLOCKS (0 << 8) -#define IDE_RCT_3_CLOCKS (1 << 8) -#define IDE_RCT_2_CLOCKS (2 << 8) -#define IDE_RCT_1_CLOCKS (3 << 8) -#define IDE_DTE1 (1 << 7) -#define IDE_PPE1 (1 << 6) -#define IDE_IE1 (1 << 5) -#define IDE_TIME1 (1 << 4) -#define IDE_DTE0 (1 << 3) -#define IDE_PPE0 (1 << 2) -#define IDE_IE0 (1 << 1) -#define IDE_TIME0 (1 << 0) #define IDE_TIM_SEC 0x42 /* IDE timings, secondary */
#define IDE_SDMA_CNT 0x48 /* Synchronous DMA control */ -#define IDE_SSDE1 (1 << 3) -#define IDE_SSDE0 (1 << 2) -#define IDE_PSDE1 (1 << 1) -#define IDE_PSDE0 (1 << 0)
#define IDE_SDMA_TIM 0x4a
#define IDE_CONFIG 0x54 /* IDE I/O Configuration Register */ -#define SIG_MODE_SEC_NORMAL (0 << 18) -#define SIG_MODE_SEC_TRISTATE (1 << 18) -#define SIG_MODE_SEC_DRIVELOW (2 << 18) -#define SIG_MODE_PRI_NORMAL (0 << 16) -#define SIG_MODE_PRI_TRISTATE (1 << 16) -#define SIG_MODE_PRI_DRIVELOW (2 << 16) -#define FAST_SCB1 (1 << 15) -#define FAST_SCB0 (1 << 14) -#define FAST_PCB1 (1 << 13) -#define FAST_PCB0 (1 << 12) -#define SCB1 (1 << 3) -#define SCB0 (1 << 2) -#define PCB1 (1 << 1) -#define PCB0 (1 << 0)
#define SATA_SIRI 0xa0 /* SATA Indexed Register Index */ #define SATA_SIRD 0xa4 /* SATA Indexed Register Data */ @@ -342,6 +314,7 @@ int early_spi_read(u32 offset, u32 size, u8 *buffer); #define D31IP 0x3100 /* 32bit */ #define D31IP_TTIP 24 /* Thermal Throttle Pin */ #define D31IP_SIP2 20 /* SATA Pin 2 */ +#define D31IP_UNKIP 16 #define D31IP_SMIP 12 /* SMBUS Pin */ #define D31IP_SIP 8 /* SATA Pin */ #define D30IP 0x3104 /* 32bit */ diff --git a/src/southbridge/intel/bd82x6x/sata.c b/src/southbridge/intel/bd82x6x/sata.c index 594b09d..9655711 100644 --- a/src/southbridge/intel/bd82x6x/sata.c +++ b/src/southbridge/intel/bd82x6x/sata.c @@ -23,6 +23,7 @@ #include <device/device.h> #include <device/pci.h> #include <device/pci_ids.h> +#include <delay.h> #include "pch.h"
typedef struct southbridge_intel_bd82x6x_config config_t; @@ -96,27 +97,26 @@ static void sata_init(struct device *dev) ((config->sata_port_map ^ 0x3f) << 24) | 0x183); } else if(config->sata_ahci) { u32 abar; + int i;
printk(BIOS_DEBUG, "SATA: Controller in AHCI mode.\n"); + udelay (1000);
/* Set Interrupt Line */ /* Interrupt Pin is set by D31IP.PIP */ - pci_write_config8(dev, INTR_LN, 0x0a); + pci_write_config8(dev, INTR_LN, config->sata_irq_line);
/* Set timings */ - pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE | - IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS | - IDE_PPE0 | IDE_IE0 | IDE_TIME0); + pci_write_config16(dev, IDE_TIM_PRI, config->ide_tim_pri); pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE | IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
/* Sync DMA */ - pci_write_config16(dev, IDE_SDMA_CNT, IDE_PSDE0); - pci_write_config16(dev, IDE_SDMA_TIM, 0x0001); + pci_write_config16(dev, IDE_SDMA_CNT, config->ide_sdma_cnt); + pci_write_config16(dev, IDE_SDMA_TIM, config->ide_sdma_tim);
/* Set IDE I/O Configuration */ - reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0; - pci_write_config32(dev, IDE_CONFIG, reg32); + pci_write_config32(dev, IDE_CONFIG, config->ide_config);
/* for AHCI, Port Enable is managed in memory mapped space */ reg16 = pci_read_config16(dev, 0x92); @@ -126,10 +126,14 @@ static void sata_init(struct device *dev)
/* SATA Initialization register */ pci_write_config32(dev, 0x94, - ((config->sata_port_map ^ 0x3f) << 24) | 0x183); + ((config->sata_port_map ^ 0x3f) << 24) | 0x183 | (config->set98 << 30)); + if (config->set98) + pci_write_config32(dev, 0x98, 0x00590200);
/* Initialize AHCI memory-mapped space */ abar = pci_read_config32(dev, PCI_BASE_ADDRESS_5); + udelay (1000); + printk(BIOS_DEBUG, "ABAR: %08X\n", abar); /* CAP (HBA Capabilities) : enable power management */ reg32 = read32(abar + 0x00); @@ -143,6 +147,16 @@ static void sata_init(struct device *dev) << 20; } write32(abar + 0x00, reg32); + + /* AHCI enable. */ + for (i = 0; i < 5; i++) + { + write32(abar + 0x04, read32 (abar + 0x04) | 0x80000000); + mdelay (1); + if (read32 (abar + 0x04) & 0x80000000) + break; + } + /* PI (Ports implemented) */ write32(abar + 0x0c, config->sata_port_map); (void) read32(abar + 0x0c); /* Read back 1 */ @@ -212,13 +226,14 @@ static void sata_init(struct device *dev) config->sata_port1_gen3_tx);
/* Additional Programming Requirements */ - sir_write(dev, 0x04, 0x00001600); - sir_write(dev, 0x28, 0xa0000033); + sir_write(dev, 0x04, config->sir4); + sir_write(dev, 0x28, config->sir28); reg32 = sir_read(dev, 0x54); reg32 &= 0xff000000; - reg32 |= 0x5555aa; + reg32 |= config->sir54; + sir_write(dev, 0x54, reg32); - sir_write(dev, 0x64, 0xcccc8484); + sir_write(dev, 0x64, config->sir64); reg32 = sir_read(dev, 0x68); reg32 &= 0xffff0000; reg32 |= 0xcccc; @@ -226,9 +241,10 @@ static void sata_init(struct device *dev) reg32 = sir_read(dev, 0x78); reg32 &= 0x0000ffff; reg32 |= 0x88880000; + sir_write(dev, 0x78, reg32); sir_write(dev, 0x84, 0x001c7000); - sir_write(dev, 0x88, 0x88338822); + sir_write(dev, 0x88, config->sir88); sir_write(dev, 0xa0, 0x001c7000); // a4 sir_write(dev, 0xc4, 0x0c0c0c0c); @@ -287,7 +303,7 @@ static struct device_operations sata_ops = {
static const unsigned short pci_device_ids[] = { 0x1c00, 0x1c01, 0x1c02, 0x1c03, 0x1e00, 0x1e01, 0x1e02, 0x1e03, - 0 }; + 0x3b2e, 0 };
static const struct pci_driver pch_sata __pci_driver = { .ops = &sata_ops, diff --git a/src/southbridge/intel/bd82x6x/smbus.c b/src/southbridge/intel/bd82x6x/smbus.c index 4786d8b..ad7c8f9 100644 --- a/src/southbridge/intel/bd82x6x/smbus.c +++ b/src/southbridge/intel/bd82x6x/smbus.c @@ -100,7 +100,7 @@ static struct device_operations smbus_ops = { .ops_pci = &smbus_pci_ops, };
-static const unsigned short pci_device_ids[] = { 0x1c22, 0x1e22, 0 }; +static const unsigned short pci_device_ids[] = { 0x1c22, 0x1e22, 0x3b30, 0 };
static const struct pci_driver pch_smbus __pci_driver = { .ops = &smbus_ops, diff --git a/src/southbridge/intel/bd82x6x/smbus.h b/src/southbridge/intel/bd82x6x/smbus.h index 81e5949..d6e4ce5 100644 --- a/src/southbridge/intel/bd82x6x/smbus.h +++ b/src/southbridge/intel/bd82x6x/smbus.h @@ -98,3 +98,147 @@ static int do_smbus_read_byte(unsigned smbus_base, unsigned device, unsigned add return byte; }
+#ifdef __PRE_RAM__ + +static int do_smbus_write_byte(unsigned smbus_base, unsigned device, unsigned address, unsigned data) +{ + unsigned char global_status_register; + + if (smbus_wait_until_ready(smbus_base) < 0) + return SMBUS_WAIT_UNTIL_READY_TIMEOUT; + + /* Setup transaction */ + /* Disable interrupts */ + outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL); + /* Set the device I'm talking too */ + outb(((device & 0x7f) << 1) & ~0x01, smbus_base + SMBXMITADD); + /* Set the command/address... */ + outb(address & 0xff, smbus_base + SMBHSTCMD); + /* Set up for a byte data read */ + outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x2 << 2), + (smbus_base + SMBHSTCTL)); + /* Clear any lingering errors, so the transaction will run */ + outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT); + + /* Clear the data byte... */ + outb(data, smbus_base + SMBHSTDAT0); + + /* Start the command */ + outb((inb(smbus_base + SMBHSTCTL) | 0x40), + smbus_base + SMBHSTCTL); + + /* Poll for transaction completion */ + if (smbus_wait_until_done(smbus_base) < 0) + return SMBUS_WAIT_UNTIL_DONE_TIMEOUT; + + global_status_register = inb(smbus_base + SMBHSTSTAT); + + /* Ignore the "In Use" status... */ + global_status_register &= ~(3 << 5); + + /* Read results of transaction */ + if (global_status_register != (1 << 1)) + return SMBUS_ERROR; + + return 0; +} + +static int do_smbus_block_write(unsigned smbus_base, unsigned device, + unsigned cmd, unsigned bytes, const u8 *buf) +{ + u8 status; + + if (smbus_wait_until_ready(smbus_base) < 0) + return SMBUS_WAIT_UNTIL_READY_TIMEOUT; + + /* Setup transaction */ + /* Disable interrupts */ + outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL); + /* Set the device I'm talking too */ + outb(((device & 0x7f) << 1) & ~0x01, smbus_base + SMBXMITADD); + /* Set the command/address... */ + outb(cmd & 0xff, smbus_base + SMBHSTCMD); + /* Set up for a block data write */ + outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x5 << 2), + (smbus_base + SMBHSTCTL)); + /* Clear any lingering errors, so the transaction will run */ + outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT); + + /* set number of bytes to transfer */ + outb(bytes, smbus_base + SMBHSTDAT0); + + outb(*buf++, smbus_base + SMBBLKDAT); + bytes--; + + /* Start the command */ + outb((inb(smbus_base + SMBHSTCTL) | 0x40), + smbus_base + SMBHSTCTL); + + while(!(inb(smbus_base + SMBHSTSTAT) & 1)); + /* Poll for transaction completion */ + do { + status = inb(smbus_base + SMBHSTSTAT); + if (status & ((1 << 4) | /* FAILED */ + (1 << 3) | /* BUS ERR */ + (1 << 2))) /* DEV ERR */ + return SMBUS_ERROR; + + if (status & 0x80) { /* Byte done */ + outb(*buf++, smbus_base + SMBBLKDAT); + outb(status, smbus_base + SMBHSTSTAT); + } + } while(status & 0x01); + + return 0; +} + +static int do_smbus_block_read(unsigned smbus_base, unsigned device, + unsigned cmd, unsigned bytes, u8 *buf) +{ + u8 status; + int bytes_read = 0; + if (smbus_wait_until_ready(smbus_base) < 0) + return SMBUS_WAIT_UNTIL_READY_TIMEOUT; + + /* Setup transaction */ + /* Disable interrupts */ + outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL); + /* Set the device I'm talking too */ + outb(((device & 0x7f) << 1) | 1, smbus_base + SMBXMITADD); + /* Set the command/address... */ + outb(cmd & 0xff, smbus_base + SMBHSTCMD); + /* Set up for a block data read */ + outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x5 << 2), + (smbus_base + SMBHSTCTL)); + /* Clear any lingering errors, so the transaction will run */ + outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT); + + /* Start the command */ + outb((inb(smbus_base + SMBHSTCTL) | 0x40), + smbus_base + SMBHSTCTL); + + while(!(inb(smbus_base + SMBHSTSTAT) & 1)); + /* Poll for transaction completion */ + do { + status = inb(smbus_base + SMBHSTSTAT); + if (status & ((1 << 4) | /* FAILED */ + (1 << 3) | /* BUS ERR */ + (1 << 2))) /* DEV ERR */ + return SMBUS_ERROR; + + if (status & 0x80) { /* Byte done */ + *buf = inb(smbus_base + SMBBLKDAT); + buf++; + bytes_read++; + outb(status, smbus_base + SMBHSTSTAT); + if (--bytes == 1) { + /* indicate that next byte is the last one */ + outb(inb(smbus_base + SMBHSTCTL) | 0x20, + smbus_base + SMBHSTCTL); + } + } + } while(status & 0x01); + + return bytes_read; +} +#endif diff --git a/src/southbridge/intel/bd82x6x/spi.c b/src/southbridge/intel/bd82x6x/spi.c index 09169b1..26553fe 100644 --- a/src/southbridge/intel/bd82x6x/spi.c +++ b/src/southbridge/intel/bd82x6x/spi.c @@ -315,7 +315,8 @@ static inline int get_ich_version(uint16_t device_id) if ((device_id >= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN && device_id <= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX) || (device_id >= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN && - device_id <= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX)) + device_id <= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX) + || device_id == 0x3b07) return 9;
return 0; diff --git a/src/southbridge/intel/bd82x6x/thermal.c b/src/southbridge/intel/bd82x6x/thermal.c new file mode 100644 index 0000000..c1040c5 --- /dev/null +++ b/src/southbridge/intel/bd82x6x/thermal.c @@ -0,0 +1,84 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include "pch.h" +#include <usbdebug.h> +#include <arch/io.h> + +static void thermal_init(struct device *dev) +{ + struct resource *res; + + printk(BIOS_DEBUG, "Thermal init start.\n"); + + res = find_resource(dev, 0x10); + if (!res) return; + + write32 (res->base + 4, 0x3a2b); + write8 (res->base + 0xe, 0x40); + write32 (res->base + 0x12, 0x1a40); + write16 (res->base + 0x16, 0x7746); + write16 (res->base + 0x1a, 0x10f0); + write16 (res->base + 0x56, 0xffff); + write16 (res->base + 0x64, 0xffff); + write16 (res->base + 0x66, 0xffff); + write16 (res->base + 0x68, 0xfa); + + write8 (res->base + 1, 0xb8); + + printk(BIOS_DEBUG, "Thermal init done.\n"); +} + + +static void set_subsystem(device_t dev, unsigned vendor, unsigned device) +{ + if (!vendor || !device) { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + pci_read_config32(dev, PCI_VENDOR_ID)); + } else { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + ((device & 0xffff) << 16) | (vendor & 0xffff)); + } +} + +static struct pci_operations pci_ops = { + .set_subsystem = set_subsystem, +}; + +static struct device_operations thermal_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = thermal_init, + .scan_bus = 0, + .ops_pci = &pci_ops, +}; + +static const unsigned short pci_device_ids[] = { 0x3b32, 0 }; + +static const struct pci_driver pch_thermal __pci_driver = { + .ops = &thermal_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = pci_device_ids, +}; diff --git a/src/southbridge/intel/bd82x6x/usb_debug.c b/src/southbridge/intel/bd82x6x/usb_debug.c index 79a43bd..22ab83b 100644 --- a/src/southbridge/intel/bd82x6x/usb_debug.c +++ b/src/southbridge/intel/bd82x6x/usb_debug.c @@ -28,16 +28,17 @@ void enable_usbdebug(unsigned int port) { u32 dbgctl; - device_t dev = PCI_DEV(0, 0x1d, 7); /* USB EHCI, D29:F7 */ + device_t dev = PCI_DEV(0, CONFIG_USBDEBUG_DEV, CONFIG_USBDEBUG_FUNC); + device_t bdev = PCI_DEV(0, 0, 0);
/* Set the EHCI BAR address. */ pci_write_config32(dev, EHCI_BAR_INDEX, CONFIG_EHCI_BAR);
/* Enable access to the EHCI memory space registers. */ - pci_write_config8(dev, PCI_COMMAND, PCI_COMMAND_MEMORY); + pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_SERR); + pci_write_config16(bdev, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
/* Force ownership of the Debug Port to the EHCI controller. */ - printk(BIOS_DEBUG, "Enabling OWNER_CNT\n"); dbgctl = read32(CONFIG_EHCI_BAR + CONFIG_EHCI_DEBUG_OFFSET); dbgctl |= (1 << 30); write32(CONFIG_EHCI_BAR + CONFIG_EHCI_DEBUG_OFFSET, dbgctl); @@ -47,6 +48,6 @@ void enable_usbdebug(unsigned int port) /* Required for successful build, but currently empty. */ void set_debug_port(unsigned int port) { - /* Not needed, the ICH* southbridges hardcode physical USB port 1. */ + /* Not needed, the ICH* southbridges hardcode physical USB port 2. */ }
diff --git a/src/southbridge/intel/bd82x6x/usb_ehci.c b/src/southbridge/intel/bd82x6x/usb_ehci.c index aec230c..4723ce9 100644 --- a/src/southbridge/intel/bd82x6x/usb_ehci.c +++ b/src/southbridge/intel/bd82x6x/usb_ehci.c @@ -36,6 +36,17 @@ static void usb_ehci_init(struct device *dev) RCBA32(0x35b0) = reg32;
printk(BIOS_DEBUG, "EHCI: Setting up controller.. "); + + if (dev->device == 0x3b34 || dev->device == 0x3b3c) + { + pci_write_config32 (dev, 0x84, 0x130c8911); + pci_write_config32 (dev, 0x88, 0xa0); + pci_write_config32 (dev, 0xf4, 0x80808588); + pci_write_config32 (dev, 0xf4, 0x00808588); + pci_write_config32 (dev, 0xf4, 0x00808588); + pci_write_config32 (dev, 0xfc, 0x301b1728); + } + reg32 = pci_read_config32(dev, PCI_COMMAND); reg32 |= PCI_COMMAND_MASTER; //reg32 |= PCI_COMMAND_SERR; @@ -68,22 +79,28 @@ static void usb_ehci_set_subsystem(device_t dev, unsigned vendor, unsigned devic static void usb_ehci_set_resources(struct device *dev) { #if CONFIG_USBDEBUG - struct resource *res; - u32 base; - u32 usb_debug; + u32 usb_debug = 0;
- usb_debug = get_ehci_debug(); - set_ehci_debug(0); + if (dev->path.pci.devfn == PCI_DEVFN (CONFIG_USBDEBUG_DEV, CONFIG_USBDEBUG_FUNC)) + { + usb_debug = get_ehci_debug(); + set_ehci_debug(0); + } #endif pci_dev_set_resources(dev);
#if CONFIG_USBDEBUG - res = find_resource(dev, 0x10); - set_ehci_debug(usb_debug); - if (!res) return; - base = res->base; - set_ehci_base(base); - report_resource_stored(dev, res, ""); + if (dev->path.pci.devfn == PCI_DEVFN (CONFIG_USBDEBUG_DEV, CONFIG_USBDEBUG_FUNC)) + { + struct resource *res; + u32 base; + res = find_resource(dev, 0x10); + if (!res) return; + base = res->base; + set_ehci_debug(usb_debug); + set_ehci_base(base); + report_resource_stored(dev, res, ""); + } #endif }
@@ -103,7 +120,7 @@ static struct device_operations usb_ehci_ops = { };
static const unsigned short pci_device_ids[] = { 0x1c26, 0x1c2d, 0x1e26, 0x1e2d, - 0 }; + 0x3b34, 0x3b3c, 0 };
static const struct pci_driver pch_usb_ehci __pci_driver = { .ops = &usb_ehci_ops,
-
Vladimir Serbinenko