Eric Lai has submitted this change. ( https://review.coreboot.org/c/coreboot/+/85329?usp=email )
Change subject: mb/google/nissa: Create pujjogatwin variant ......................................................................
mb/google/nissa: Create pujjogatwin variant
Create the pujjogatwin variant of nissa reference board by copying the pujjoga files to a new directory named for the variant.
The difference between pujjoga and pujjogatwin is that pujjogatwin use Twin Lake CPU and firmware config, so copying the pujjoga setting files to create new variant.
BUG=b:381152086 TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_PUJJOGATWIN
Change-Id: I345ce463699840b10016555bb104a16968e7a8c1 Signed-off-by: Roger Wang roger2.wang@lcfc.corp-partner.google.com Signed-off-by: Luca Lai luca.lai@lcfc.corp-partner.google.com Reviewed-on: https://review.coreboot.org/c/coreboot/+/85329 Reviewed-by: Kapil Porwal kapilporwal@google.com Reviewed-by: Eric Lai ericllai@google.com Reviewed-by: Subrata Banik subratabanik@google.com Tested-by: build bot (Jenkins) no-reply@coreboot.org --- M src/mainboard/google/brya/Kconfig M src/mainboard/google/brya/Kconfig.name M src/mainboard/google/brya/variants/pujjoga/memory/Makefile.mk M src/mainboard/google/brya/variants/pujjoga/memory/dram_id.generated.txt M src/mainboard/google/brya/variants/pujjoga/memory/mem_parts_used.txt A src/mainboard/google/brya/variants/pujjoga/overridetree_pujjogatwin.cb 6 files changed, 502 insertions(+), 0 deletions(-)
Approvals: Eric Lai: Looks good to me, approved build bot (Jenkins): Verified Kapil Porwal: Looks good to me, approved Subrata Banik: Looks good to me, approved
diff --git a/src/mainboard/google/brya/Kconfig b/src/mainboard/google/brya/Kconfig index 6f9f5b5..8f5c8dc 100644 --- a/src/mainboard/google/brya/Kconfig +++ b/src/mainboard/google/brya/Kconfig @@ -442,6 +442,15 @@ select DRIVERS_I2C_SX9324_SUPPORT_LEGACY_LINUX_DRIVER select HAVE_WWAN_POWER_SEQUENCE
+config BOARD_GOOGLE_PUJJOGATWIN + select BOARD_GOOGLE_BASEBOARD_NISSA + select DRIVERS_GENERIC_GPIO_KEYS + select CHROMEOS_WIFI_SAR if CHROMEOS + select DRIVERS_I2C_SX9324 + select DRIVERS_I2C_SX9324_SUPPORT_LEGACY_LINUX_DRIVER + select HAVE_WWAN_POWER_SEQUENCE + select SOC_INTEL_TWINLAKE + config BOARD_GOOGLE_QUANDISO select BOARD_GOOGLE_BASEBOARD_NISSA select CHROMEOS_WIFI_SAR if CHROMEOS @@ -763,6 +772,7 @@ default 0x0 if BOARD_GOOGLE_YAVILLA default 0x1 if BOARD_GOOGLE_ZYDRON default 0x0 if BOARD_GOOGLE_TELITH + default 0x0 if BOARD_GOOGLE_PUJJOGATWIN
config DRIVER_TPM_I2C_ADDR hex @@ -839,8 +849,10 @@ default 13 if BOARD_GOOGLE_YAVILLA default 13 if BOARD_GOOGLE_ZYDRON default 13 if BOARD_GOOGLE_TELITH + default 13 if BOARD_GOOGLE_PUJJOGATWIN
config OVERRIDE_DEVICETREE + default "variants/$(CONFIG_VARIANT_DIR)/overridetree_pujjogatwin.cb" if BOARD_GOOGLE_PUJJOGATWIN default "variants/$(CONFIG_VARIANT_DIR)/overridetree.cb"
config MAINBOARD_DIR @@ -923,6 +935,7 @@ default "Zydron" if BOARD_GOOGLE_ZYDRON default "Pujjoga" if BOARD_GOOGLE_PUJJOGA default "Telith" if BOARD_GOOGLE_TELITH + default "Pujjogatwin" if BOARD_GOOGLE_PUJJOGATWIN
config VARIANT_DIR default "agah" if BOARD_GOOGLE_AGAH @@ -993,6 +1006,7 @@ default "yavista" if BOARD_GOOGLE_YAVISTA default "pujjoga" if BOARD_GOOGLE_PUJJOGA default "telith" if BOARD_GOOGLE_TELITH + default "pujjoga" if BOARD_GOOGLE_PUJJOGATWIN
config VBOOT select VBOOT_EARLY_EC_SYNC if !(BOARD_GOOGLE_BASEBOARD_NISSA || BOARD_GOOGLE_BASEBOARD_TRULO) diff --git a/src/mainboard/google/brya/Kconfig.name b/src/mainboard/google/brya/Kconfig.name index 9bc68bb..eb0b006 100644 --- a/src/mainboard/google/brya/Kconfig.name +++ b/src/mainboard/google/brya/Kconfig.name @@ -200,6 +200,9 @@ config BOARD_GOOGLE_PUJJOGA bool "-> Pujjoga"
+config BOARD_GOOGLE_PUJJOGATWIN + bool "-> Pujjogatwin" + config BOARD_GOOGLE_ORISA bool "-> Orisa"
diff --git a/src/mainboard/google/brya/variants/pujjoga/memory/Makefile.mk b/src/mainboard/google/brya/variants/pujjoga/memory/Makefile.mk index c6e0a1c..54cd4b0 100644 --- a/src/mainboard/google/brya/variants/pujjoga/memory/Makefile.mk +++ b/src/mainboard/google/brya/variants/pujjoga/memory/Makefile.mk @@ -7,3 +7,4 @@ SPD_SOURCES += spd/lp5/set-0/spd-7.hex # ID = 0(0b0000) Parts = H58G56BK7BX068, K3KL8L80CM-MGCT, MT62F1G32D2DS-026 WT:B SPD_SOURCES += spd/lp5/set-0/spd-1.hex # ID = 1(0b0001) Parts = H9JCNNNBK3MLYR-N6E SPD_SOURCES += spd/lp5/set-0/spd-9.hex # ID = 2(0b0010) Parts = K3KL6L60GM-MGCT +SPD_SOURCES += spd/lp5/set-0/spd-11.hex # ID = 3(0b0011) Parts = H58G56CK8BX146 diff --git a/src/mainboard/google/brya/variants/pujjoga/memory/dram_id.generated.txt b/src/mainboard/google/brya/variants/pujjoga/memory/dram_id.generated.txt index adec69c..40724af 100644 --- a/src/mainboard/google/brya/variants/pujjoga/memory/dram_id.generated.txt +++ b/src/mainboard/google/brya/variants/pujjoga/memory/dram_id.generated.txt @@ -9,3 +9,4 @@ K3KL6L60GM-MGCT 2 (0010) K3KL8L80CM-MGCT 0 (0000) MT62F1G32D2DS-026 WT:B 0 (0000) +H58G56CK8BX146 3 (0011) diff --git a/src/mainboard/google/brya/variants/pujjoga/memory/mem_parts_used.txt b/src/mainboard/google/brya/variants/pujjoga/memory/mem_parts_used.txt index b962c72..98df9d2 100644 --- a/src/mainboard/google/brya/variants/pujjoga/memory/mem_parts_used.txt +++ b/src/mainboard/google/brya/variants/pujjoga/memory/mem_parts_used.txt @@ -14,3 +14,4 @@ K3KL6L60GM-MGCT K3KL8L80CM-MGCT MT62F1G32D2DS-026 WT:B +H58G56CK8BX146 diff --git a/src/mainboard/google/brya/variants/pujjoga/overridetree_pujjogatwin.cb b/src/mainboard/google/brya/variants/pujjoga/overridetree_pujjogatwin.cb new file mode 100644 index 0000000..a10ae5f --- /dev/null +++ b/src/mainboard/google/brya/variants/pujjoga/overridetree_pujjogatwin.cb @@ -0,0 +1,482 @@ +fw_config + field WWAN 3 4 + option WWAN_ABSENT 0 + option LTE_PRESENT 1 + option 5G_PRESENT 2 + end + field WIFI_SAR_ID 18 21 + option WIFI_SAR_TABLE_AX211 0 + option WIFI_SAR_TABLE_AX203 1 + end +end + +chip soc/intel/alderlake + # Acoustic settings + register "acoustic_noise_mitigation" = "1" + register "slow_slew_rate[VR_DOMAIN_IA]" = "SLEW_FAST_8" + register "slow_slew_rate[VR_DOMAIN_GT]" = "SLEW_FAST_8" + register "fast_pkg_c_ramp_disable[VR_DOMAIN_IA]" = "1" + register "fast_pkg_c_ramp_disable[VR_DOMAIN_GT]" = "1" + register "PreWake" = "100" + + register "sagv" = "SaGv_Enabled" + + # EMMC Tx CMD Delay + # Refer to EDS-Vol2-42.3.7. + # [14:8] steps of delay for DDR mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for SDR mode, each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_tx_cmd_cntl" = "0x505" + + # EMMC TX DATA Delay 1 + # Refer to EDS-Vol2-42.3.8. + # [14:8] steps of delay for HS400, each 125ps, range: 0 - 78. + # [6:0] steps of delay for SDR104/HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl1" = "0x909" + + # EMMC TX DATA Delay 2 + # Refer to EDS-Vol2-42.3.9. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 79. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 -79. + # [6:0] steps of delay for SDR12, each 125ps. Range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl2" = "0x1C2A2828" + + # EMMC RX CMD/DATA Delay 1 + # Refer to EDS-Vol2-42.3.10. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 119. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 - 119. + # [6:0] steps of delay for SDR12, each 125ps, range: 0 - 119. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl1" = "0x1C1B4F1B" + + # EMMC RX CMD/DATA Delay 2 + # Refer to EDS-Vol2-42.3.12. + # [17:16] stands for Rx Clock before Output Buffer, + # 00: Rx clock after output buffer, + # 01: Rx clock before output buffer, + # 10: Automatic selection based on working mode. + # 11: Reserved + # [14:8] steps of delay for Auto Tuning Mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl2" = "0x10023" + + # EMMC Rx Strobe Delay + # Refer to EDS-Vol2-42.3.11. + # [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps, range: 0 - 39. + # [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_rx_strobe_cntl" = "0x11515" + + # SOC Aux orientation override: + # This is a bitfield that corresponds to up to 4 TCSS ports. + # Bits (0,1) allocated for TCSS Port1 configuration and Bits (2,3)for TCSS Port2. + # TcssAuxOri = 0101b + # Bit0,Bit2 set to "1" indicates no retimer on USBC Ports + # Bit1,Bit3 set to "0" indicates Aux lines are not swapped on the + # motherboard to USBC connector + register "tcss_aux_ori" = "5" + + register "typec_aux_bias_pads[0]" = "{.pad_auxp_dc = GPP_E22, .pad_auxn_dc = GPP_E23}" + register "typec_aux_bias_pads[1]" = "{.pad_auxp_dc = GPP_A21, .pad_auxn_dc = GPP_A22}" + + register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # USB2_C0 + register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC_SKIP)" # USB2_C1 + register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # USB-A1 + register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # WWAN + register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # UF Camera + register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # WF Camera + register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth port for PCIe WLAN + register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth port for CNVi WLAN + + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3 port for WWAN + + # Configure external V1P05/Vnn/VnnSx Rails for Pujjoga + register "ext_fivr_settings" = "{ + .configure_ext_fivr = 1, + }" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| I2C0 | TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| I2C1 | Touchscreen | + #| I2C2 | Sub-board(PSensor)/WCAM | + #| I2C3 | Audio | + #| I2C5 | Trackpad | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .i2c[0] = { + .early_init = 1, + .speed = I2C_SPEED_FAST_PLUS, + .speed_config[0] = { + .speed = I2C_SPEED_FAST_PLUS, + .scl_lcnt = 55, + .scl_hcnt = 30, + .sda_hold = 7, + } + }, + .i2c[1] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 157, + .scl_hcnt = 79, + .sda_hold = 7, + } + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 157, + .scl_hcnt = 79, + .sda_hold = 7, + } + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 158, + .scl_hcnt = 79, + .sda_hold = 7, + } + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 158, + .scl_hcnt = 79, + .sda_hold = 7, + } + }, + }" + + device domain 0 on + device ref dtt on + chip drivers/intel/dptf + ## sensor information + register "options.tsr[0].desc" = ""CPU"" + register "options.tsr[1].desc" = ""DDR"" + register "options.tsr[2].desc" = ""5VCharger"" + + + ## Passive Policy + register "policies.passive" = "{ + [0] = DPTF_PASSIVE(CPU, CPU, 90, 10000), + [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 80, 60000), + [2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 80, 60000), + [3] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_2, 75, 15000), + }" + + ## Critical Policy + register "policies.critical" = "{ + [0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN), + [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 100, SHUTDOWN), + [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 100, SHUTDOWN), + [3] = DPTF_CRITICAL(TEMP_SENSOR_2, 100, SHUTDOWN), + }" + + register "controls.power_limits" = "{ + .pl1 = { + .min_power = 3000, + .max_power = 6000, + .time_window_min = 1 * MSECS_PER_SEC, + .time_window_max = 1 * MSECS_PER_SEC, + .granularity = 200, + }, + .pl2 = { + .min_power = 25000, + .max_power = 25000, + .time_window_min = 1 * MSECS_PER_SEC, + .time_window_max = 1 * MSECS_PER_SEC, + .granularity = 1000, + } + }" + + ## Charger Performance Control (Control, mA) + register "controls.charger_perf" = "{ + [0] = { 255, 3000 }, + [1] = { 24, 2000 }, + [2] = { 16, 1500 }, + [3] = { 8, 1000 } + }" + device generic 0 on end + end + end + device ref i2c1 on + chip drivers/i2c/hid + register "generic.hid" = ""GDIX0000"" + register "generic.desc" = ""Goodix Touchscreen"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)" + register "generic.detect" = "1" + register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" + register "generic.enable_delay_ms" = "20" + register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)" + register "generic.reset_delay_ms" = "180" + register "generic.reset_off_delay_ms" = "3" + register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)" + register "generic.stop_off_delay_ms" = "1" + register "generic.has_power_resource" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 5d on end + end + chip drivers/generic/gpio_keys + register "name" = ""PENH"" + register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_F13)" + register "key.wake_gpe" = "GPE0_DW2_15" + register "key.wakeup_route" = "WAKEUP_ROUTE_SCI" + register "key.wakeup_event_action" = "EV_ACT_DEASSERTED" + register "key.dev_name" = ""EJCT"" + register "key.linux_code" = "SW_PEN_INSERTED" + register "key.linux_input_type" = "EV_SW" + register "key.label" = ""pen_eject"" + device generic 0 on end + end + end + device ref i2c2 on + chip drivers/i2c/sx9324 + register "desc" = ""SAR Proximity Sensor"" + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_H19_IRQ)" + register "speed" = "I2C_SPEED_FAST" + register "uid" = "1" + register "reg_gnrl_ctrl0" = "0x16" + register "reg_gnrl_ctrl1" = "0x21" + register "reg_afe_ctrl0" = "0x00" + register "reg_afe_ctrl1" = "0x10" + register "reg_afe_ctrl2" = "0x00" + register "reg_afe_ctrl3" = "0x00" + register "reg_afe_ctrl4" = "0x47" + register "reg_afe_ctrl5" = "0x00" + register "reg_afe_ctrl6" = "0x00" + register "reg_afe_ctrl7" = "0x47" + register "reg_afe_ctrl8" = "0x12" + register "reg_afe_ctrl9" = "0x08" + register "reg_afe_ph0" = "0x3d" + register "reg_afe_ph1" = "0x1b" + register "reg_afe_ph2" = "0x1f" + register "reg_afe_ph3" = "0x3d" + register "reg_prox_ctrl0" = "0x0b" + register "reg_prox_ctrl1" = "0x0a" + register "reg_prox_ctrl2" = "0x90" + register "reg_prox_ctrl3" = "0x60" + register "reg_prox_ctrl4" = "0x0c" + register "reg_prox_ctrl5" = "0x00" + register "reg_prox_ctrl6" = "0x19" + register "reg_prox_ctrl7" = "0x58" + register "reg_adv_ctrl0" = "0x00" + register "reg_adv_ctrl1" = "0x00" + register "reg_adv_ctrl2" = "0x00" + register "reg_adv_ctrl3" = "0x00" + register "reg_adv_ctrl4" = "0x00" + register "reg_adv_ctrl5" = "0x05" + register "reg_adv_ctrl6" = "0x00" + register "reg_adv_ctrl7" = "0x00" + register "reg_adv_ctrl8" = "0x00" + register "reg_adv_ctrl9" = "0x00" + register "reg_adv_ctrl10" = "0x00" + register "reg_adv_ctrl11" = "0x00" + register "reg_adv_ctrl12" = "0x00" + register "reg_adv_ctrl13" = "0x00" + register "reg_adv_ctrl14" = "0x80" + register "reg_adv_ctrl15" = "0x0c" + register "reg_adv_ctrl16" = "0x08" + register "reg_adv_ctrl17" = "0x56" + register "reg_adv_ctrl18" = "0x33" + register "reg_adv_ctrl19" = "0x00" + register "reg_adv_ctrl20" = "0x00" + + register "ph0_pin" = "{1, 3, 3}" + register "ph1_pin" = "{3, 2, 1}" + register "ph2_pin" = "{3, 3, 1}" + register "ph3_pin" = "{1, 3, 3}" + register "ph01_resolution" = "1024" + register "ph23_resolution" = "1024" + register "startup_sensor" = "1" + register "ph01_proxraw_strength" = "3" + register "ph23_proxraw_strength" = "2" + register "avg_pos_strength" = "256" + register "cs_idle_sleep" = ""hi-z"" + register "int_comp_resistor" = ""lowest"" + register "input_precharge_resistor_ohms" = "4000" + register "input_analog_gain" = "1" + device i2c 28 on + probe WWAN LTE_PRESENT + end + end + end + device ref i2c3 on + chip drivers/i2c/generic + register "hid" = ""RTL5682"" + register "name" = ""RT58"" + register "desc" = ""Headset Codec"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)" + # Set the jd_src to RT5668_JD1 for jack detection + register "property_count" = "1" + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on end + end + chip drivers/generic/alc1015 + register "hid" = ""RTL1019"" + register "sdb" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)" + device generic 0 on end + end + end + device ref i2c5 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)" + register "wake" = "GPE0_DW2_14" + register "detect" = "1" + device i2c 15 on end + end + chip drivers/i2c/hid + register "generic.hid" = ""SYNA0000"" + register "generic.cid" = ""ACPI0C50"" + register "generic.desc" = ""Synaptics Touchpad"" + register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)" + register "generic.wake" = "GPE0_DW2_14" + register "generic.detect" = "1" + register "hid_desc_reg_offset" = "0x20" + device i2c 0x2c on end + end + end + device ref pcie_rp4 on + # PCIe 4 WLAN + register "pch_pcie_rp[PCH_RP(4)]" = "{ + .clk_src = 2, + .clk_req = 2, + .flags = PCIE_RP_LTR | PCIE_RP_AER, + }" + chip drivers/wifi/generic + register "wake" = "GPE0_DW1_03" + register "add_acpi_dma_property" = "true" + device pci 00.0 on end + end + end + device ref pcie_rp7 off end + device ref pch_espi on + chip ec/google/chromeec + use conn0 as mux_conn[0] + use conn1 as mux_conn[1] + device pnp 0c09.0 on end + end + end + device ref pmc hidden + chip drivers/intel/pmc_mux + device generic 0 on + chip drivers/intel/pmc_mux/conn + use usb2_port1 as usb2_port + use tcss_usb3_port1 as usb3_port + device generic 0 alias conn0 on end + end + chip drivers/intel/pmc_mux/conn + use usb2_port2 as usb2_port + use tcss_usb3_port2 as usb3_port + device generic 1 alias conn1 on end + end + end + end + end + device ref tcss_xhci on + chip drivers/usb/acpi + device ref tcss_root_hub on + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C0 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))" + device ref tcss_usb3_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C1 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))" + device ref tcss_usb3_port2 on end + end + end + end + end + device ref xhci on + chip drivers/usb/acpi + device ref xhci_root_hub on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C0 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))" + device ref usb2_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C1 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))" + device ref usb2_port2 on end + + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A1 (DB)"" + register "type" = "UPC_TYPE_A" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(4, 1))" + device ref usb2_port4 on end + end + + chip drivers/usb/acpi + register "desc" = ""USB2 WWAN"" + register "type" = "UPC_TYPE_INTERNAL" + device ref usb2_port5 on + probe WWAN LTE_PRESENT + end + end + chip drivers/usb/acpi + register "desc" = ""USB2 UFC"" + register "type" = "UPC_TYPE_INTERNAL" + device ref usb2_port6 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 WFC"" + register "type" = "UPC_TYPE_INTERNAL" + device ref usb2_port7 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + register "reset_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)" + device ref usb2_port8 on end + end + chip drivers/usb/acpi + register "desc" = ""CNVi Bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + register "reset_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)" + device ref usb2_port10 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Port A1 (DB)"" + register "type" = "UPC_TYPE_USB3_A" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(4, 1))" + device ref usb3_port2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 WWAN"" + register "type" = "UPC_TYPE_INTERNAL" + device ref usb3_port3 on + probe WWAN LTE_PRESENT + end + end + end + end + end + end +end
-
Eric Lai (Code Review)