[S] Change in coreboot[master]: mb/prodrive/hermes: Add SATA hotplug EEPROM setting

[Justin van Son (Code Review)]

Justin van Son has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/72712 )

Change subject: mb/prodrive/hermes: Add SATA hotplug EEPROM setting
......................................................................

mb/prodrive/hermes: Add SATA hotplug EEPROM setting

Add an option to the EEPROM to configure SATA hotplug. Per port
configuration is not needed, so add a global option to toggle the
hotplug setting on all SATA ports.

Change-Id: Ib7dcd12049bdf7c2d200530acd8a6da5df726203
Signed-off-by: Justin van Son 
---
M src/mainboard/prodrive/hermes/eeprom.h
M src/mainboard/prodrive/hermes/mainboard.c
2 files changed, 33 insertions(+), 2 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/12/72712/1

diff --git a/src/mainboard/prodrive/hermes/eeprom.h b/src/mainboard/prodrive/hermes/eeprom.h
index f02206f..82d56d3 100644
--- a/src/mainboard/prodrive/hermes/eeprom.h
+++ b/src/mainboard/prodrive/hermes/eeprom.h
@@ -60,8 +60,9 @@
    		uint8_t pink_rear_vref;
    		uint8_t vtx_disabled;
    		uint8_t boot_menu_disabled;
+			uint8_t sata_hotplug;
    	};
-		uint8_t raw_settings[12];
+		uint8_t raw_settings[13];
    };
 };

@@ -70,7 +71,7 @@
    PRIMARY_VIDEO_INTEL  = 1,
 };

-_Static_assert(sizeof(struct eeprom_board_settings) == (12 + sizeof(uint32_t)),
+_Static_assert(sizeof(struct eeprom_board_settings) == (13 + sizeof(uint32_t)),
    	"struct eeprom_board_settings has invalid size!");

struct __packed eeprom_bmc_settings {
diff --git a/src/mainboard/prodrive/hermes/mainboard.c b/src/mainboard/prodrive/hermes/mainboard.c
index 0b0eb88..9e2b111 100644
--- a/src/mainboard/prodrive/hermes/mainboard.c
+++ b/src/mainboard/prodrive/hermes/mainboard.c
@@ -143,6 +143,17 @@
    	printk(BIOS_ERR, "MB: Failed to update Board Layout\n");
 }

+static void mainboard_set_sata_hotplug(bool on)
+{
+	uint8_t sata_hotplug[] = { 1, 1, 0, 0, 1, 1, 1, 1 };
+	config_t *config = config_of_soc();
+
+	if (!on)
+		memset(sata_hotplug, 0, sizeof(sata_hotplug));
+
+	memcpy(config->SataPortsHotPlug, sata_hotplug, sizeof(sata_hotplug));
+}
+
 static void mainboard_init(void *chip_info)
 {
    const struct eeprom_board_settings *const board_cfg = get_board_settings();
@@ -166,6 +177,11 @@
    if (!board_cfg)
    	return;

+	/* 0: Disable SATA hotplug, 1: Enable SATA hotplug. For all ports.*/
+	const bool hotplug = board_cfg->sata_hotplug;
+
+	mainboard_set_sata_hotplug(hotplug);
+
    /* Encoding: 0 -> S0, 1 -> S5 */
    const bool on = !board_cfg->power_state_after_g3;