Matt DeVillier has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/80182?usp=email )
Change subject: mb/purism/librem_cnl: Set edk2 boot timeout for Librem Mini ......................................................................
mb/purism/librem_cnl: Set edk2 boot timeout for Librem Mini
The Librem mini/mini-v2 need a few extra seconds for display init in order for the edk2 boot splash to show.
TEST=build/boot Librem Mini v2 w/edk2 payload, verify splash screen shown / user has time to enter setup menu.
Change-Id: I9d2d514719a9918ee58cc63969b3adae44ac1632 Signed-off-by: Matt DeVillier matt.devillier@gmail.com --- M src/mainboard/purism/librem_cnl/Kconfig 1 file changed, 4 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/82/80182/1
diff --git a/src/mainboard/purism/librem_cnl/Kconfig b/src/mainboard/purism/librem_cnl/Kconfig index f75f316..1628ec6 100644 --- a/src/mainboard/purism/librem_cnl/Kconfig +++ b/src/mainboard/purism/librem_cnl/Kconfig @@ -112,3 +112,7 @@ U81 on the bottom of the board near the front edge; the IC is not populated. TX is pin 14, RX is pin 19. The signals are 3.3V (do NOT connect directly to an RS-232 serial port). + +config EDK2_BOOT_TIMEOUT + int + default 4 if BOARD_PURISM_LIBREM_MINI || BOARD_PURISM_LIBREM_MINI_V2