Hannah Williams has uploaded this change for review. ( https://review.coreboot.org/25733
Change subject: mb/google/octopus: Enable Proximity Sensor ......................................................................
mb/google/octopus: Enable Proximity Sensor
Configure i2c-1 for sx9311
BUG=b:78150874 Signed-off-by: Hannah Williams hannah.williams@intel.com
Change-Id: I8326aadab2c3c4042b8c859e637f279c39fd19db --- M src/mainboard/google/octopus/variants/baseboard/devicetree.cb 1 file changed, 14 insertions(+), 1 deletion(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/33/25733/1
diff --git a/src/mainboard/google/octopus/variants/baseboard/devicetree.cb b/src/mainboard/google/octopus/variants/baseboard/devicetree.cb index 7072b78..88db9e9 100644 --- a/src/mainboard/google/octopus/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/octopus/variants/baseboard/devicetree.cb @@ -61,6 +61,11 @@ .fall_time_ns = 30, }"
+ # Proximity Sensor at 400kHz + register "i2c[1]" = "{ + .speed = I2C_SPEED_FAST, + }" + # Enable I2C5 for audio codec at 400kHz register "i2c[5]" = "{ .speed = I2C_SPEED_FAST, @@ -138,7 +143,15 @@ device i2c 0x9 on end end end # - I2C 0 - device pci 16.1 on end # - I2C 1 + device pci 16.1 on + chip drivers/i2c/generic + register "hid" = ""SX9311"" + register "desc" = ""P-Sensor"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_214_IRQ)" + register "probed" = "1" + device i2c 0x28 on end + end + end # - I2C 1 device pci 16.2 on end # - I2C 2 device pci 16.3 on end # - I2C 3 device pci 17.0 on end # - I2C 4