the following patch was just integrated into master: commit 0b4b230163c82e74e7ac9b74c0c8f8e4abe9130e Author: Martin Roth martin.roth@se-eng.com Date: Wed Jun 25 10:13:22 2014 -0600
bayleybay_fsp: Switch from EHCI controller to XHCI
- Disable the EHCI controller and enable the XHCI controller.
SeaBIOS has been tested on the board and boots an OS from a flashdrive at SuperSpeed. This also enables the top USB port on the 2-port stack, which goes through a High Speed Inter-Chip port. The HSIC port is only enabled through the XHCI device.
Change-Id: Ic3dfc55028fa5e081a30819fe9596b1a9f57fd9c Signed-off-by: Martin Roth martin.roth@se-eng.com Reviewed-on: http://review.coreboot.org/6106 Reviewed-by: Dave Frodin dave.frodin@se-eng.com Tested-by: build bot (Jenkins)
See http://review.coreboot.org/6106 for details.
-gerrit