Change in coreboot[master]: mb/google/brya: Fix a few mistakes in brya0 overridetree

[Tim Wawrzynczak (Code Review)]

Tim Wawrzynczak has submitted this change. ( https://review.coreboot.org/c/coreboot/+/51145 )

Change subject: mb/google/brya: Fix a few mistakes in brya0 overridetree
......................................................................

mb/google/brya: Fix a few mistakes in brya0 overridetree

1) Both SAR sensors had a UID of `2`, making them indistinguishable
2) No `device` underneath max98357a `chip`

Change-Id: Icf586229532819a7779652cbee73755b036dfbdc
Signed-off-by: Tim Wawrzynczak 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51145
Reviewed-by: Angel Pons 
Reviewed-by: EricR Lai 
Reviewed-by: Furquan Shaikh 
Tested-by: build bot (Jenkins) 
---
M src/mainboard/google/brya/Kconfig
M src/mainboard/google/brya/variants/brya0/overridetree.cb
2 files changed, 3 insertions(+), 1 deletion(-)

Approvals:
  build bot (Jenkins): Verified
  Furquan Shaikh: Looks good to me, approved
  Angel Pons: Looks good to me, approved
  EricR Lai: Looks good to me, approved

diff --git a/src/mainboard/google/brya/Kconfig b/src/mainboard/google/brya/Kconfig
index e4f7258..d0391af 100644
--- a/src/mainboard/google/brya/Kconfig
+++ b/src/mainboard/google/brya/Kconfig
@@ -3,6 +3,7 @@
    select BOARD_ROMSIZE_KB_32768
    select DRIVERS_I2C_GENERIC
    select DRIVERS_I2C_HID
+	select DRIVERS_GENERIC_MAX98357A
    select DRIVERS_I2C_SX9324
    select DRIVERS_SPI_ACPI
    select DRIVERS_WIFI_GENERIC
diff --git a/src/mainboard/google/brya/variants/brya0/overridetree.cb b/src/mainboard/google/brya/variants/brya0/overridetree.cb
index 030d19e..b70f156 100644
--- a/src/mainboard/google/brya/variants/brya0/overridetree.cb
+++ b/src/mainboard/google/brya/variants/brya0/overridetree.cb
@@ -73,7 +73,7 @@
    			register "desc" = ""SAR1 Proximity Sensor""
    			register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_H19_IRQ)"
    			register "speed" = "I2C_SPEED_FAST"
-				register "uid" = "2"
+				register "uid" = "1"
    			register "reg_gnrl_ctrl0" = "0x16"
    			register "reg_gnrl_ctrl1" = "0x21"
    			register "reg_afe_ctrl0" = "0x00"
@@ -183,6 +183,7 @@
    			register "sdmode_gpio" =
    					"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
    			register "sdmode_delay" = "5"
+				device generic 0 on end
    		end
    	end
    	device ref gspi1 on