New patch to review for coreboot: SeaBIOS/Kconfig: Remove SEABIOS_MALLOC_UPPERMEMORY option

[Martin Roth]

Martin Roth ([e-mail]) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/12570

-gerrit

commit 17a2aa428c4ee415581dff1028c240f43daf0db7
Author: Martin Roth 
Date:   Sat Nov 28 16:32:25 2015 -0700

SeaBIOS/Kconfig: Remove SEABIOS_MALLOC_UPPERMEMORY option

This has been replaced by the PAYLOAD_CONFIGFILE option, allowing
    any SeaBIOS config option to be set by a platform.

Change-Id: I584c4c481266740840158baba76581d68e69b448
    Signed-off-by: Martin Roth 
---
 payloads/external/Makefile.inc         |  3 +--
 payloads/external/SeaBIOS/Kconfig      | 12 ------------
 payloads/external/SeaBIOS/Makefile.inc |  3 ---
 3 files changed, 1 insertion(+), 17 deletions(-)

diff --git a/payloads/external/Makefile.inc b/payloads/external/Makefile.inc
index b044a48..847eef1 100644
--- a/payloads/external/Makefile.inc
+++ b/payloads/external/Makefile.inc
@@ -54,8 +54,7 @@ seabios:
    		CONFIG_SEABIOS_THREAD_OPTIONROMS=$(CONFIG_SEABIOS_THREAD_OPTIONROMS) \
    		CONFIG_SEABIOS_VGA_COREBOOT=$(CONFIG_SEABIOS_VGA_COREBOOT) \
    		CONFIG_CONSOLE_SERIAL=$(CONFIG_CONSOLE_SERIAL) \
-			CONFIG_TTYS0_BASE=$(CONFIG_TTYS0_BASE) \
-			CONFIG_SEABIOS_MALLOC_UPPERMEMORY=$(CONFIG_SEABIOS_MALLOC_UPPERMEMORY)
+			CONFIG_TTYS0_BASE=$(CONFIG_TTYS0_BASE)

filo:
    $(MAKE) -C payloads/external/FILO -f Makefile.inc \
diff --git a/payloads/external/SeaBIOS/Kconfig b/payloads/external/SeaBIOS/Kconfig
index 468c689..4f4fb02 100644
--- a/payloads/external/SeaBIOS/Kconfig
+++ b/payloads/external/SeaBIOS/Kconfig
@@ -35,18 +35,6 @@ config SEABIOS_THREAD_OPTIONROMS
      variations during option ROM code execution. It is not
      known if all option ROMs will behave properly with this option.

-config SEABIOS_MALLOC_UPPERMEMORY
-	bool
-	default y
-	help
-	  Use the "Upper Memory Block" area (0xc0000-0xf0000) for internal
-	  "low memory" allocations.  If this is not selected, the memory is
-	  instead allocated from the "9-segment" (0x90000-0xa0000).
-	  This is not typically needed, but may be required on some platforms
-	  to allow USB and SATA buffers to be written correctly by the
-	  hardware.  In general, if this is desired, the option will be
-	  set to 'N' by the chipset Kconfig.
-
 config SEABIOS_VGA_COREBOOT
    prompt "Include generated option rom that implements legacy VGA BIOS compatibility"
    default n
diff --git a/payloads/external/SeaBIOS/Makefile.inc b/payloads/external/SeaBIOS/Makefile.inc
index 21da35e..7754afb 100644
--- a/payloads/external/SeaBIOS/Makefile.inc
+++ b/payloads/external/SeaBIOS/Makefile.inc
@@ -31,9 +31,6 @@ ifeq ($(CONFIG_CONSOLE_SERIAL),y)
 else
    echo "# CONFIG_DEBUG_SERIAL is not set" >> seabios/.config
 endif
-ifneq ($(CONFIG_SEABIOS_MALLOC_UPPERMEMORY),y)
-	echo "# CONFIG_MALLOC_UPPERMEMORY is not set" >> seabios/.config
-endif
 ifneq ($(CONFIG_SEABIOS_THREAD_OPTIONROMS),y)
    echo "# CONFIG_THREAD_OPTIONROMS is not set" >> seabios/.config
 endif