Patch set updated for coreboot: 4858472 bayleybay_fsp: Switch from EHCI controller to XHCI

[Martin Roth]

Martin Roth ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/6106

-gerrit

commit 4858472465ec628ec17b3efa8e7bd5322996e5ff
Author: Martin Roth 
Date:   Wed Jun 25 10:13:22 2014 -0600

bayleybay_fsp: Switch from EHCI controller to XHCI

- Disable the EHCI controller and enable the XHCI controller.

SeaBIOS has been tested on the board and boots an OS from a
    flashdrive at SuperSpeed.
    This also enables the top USB port on the 2-port stack, which goes
    through a High Speed Inter-Chip port.  The HSIC port is only enabled
    through the XHCI device.

Change-Id: Ic3dfc55028fa5e081a30819fe9596b1a9f57fd9c
    Signed-off-by: Martin Roth 
---
 src/mainboard/intel/bayleybay_fsp/devicetree.cb | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/mainboard/intel/bayleybay_fsp/devicetree.cb b/src/mainboard/intel/bayleybay_fsp/devicetree.cb
index 1bde834..befd3dc 100644
--- a/src/mainboard/intel/bayleybay_fsp/devicetree.cb
+++ b/src/mainboard/intel/bayleybay_fsp/devicetree.cb
@@ -50,7 +50,7 @@ chip soc/intel/fsp_baytrail
    	device pci 11.0 on end	# 8086 0F15 - SDIO Port (SD2 pins)
    	device pci 12.0 on end	# 8086 0F16 - SD Port (SD3 pins)
    	device pci 13.0 on end	# 8086 0F23 - SATA AHCI (0F20, 0F21, 0F22, 0F23)
-		device pci 14.0 off end	# 8086 0F35 - USB XHCI - Only 1 USB controller at a time
+		device pci 14.0 on end	# 8086 0F35 - USB XHCI - Only 1 USB controller at a time
    	device pci 15.0 off end	# 8086 0F28 - LP Engine Audio
    	device pci 16.0 off end # 8086 0F37 - OTG controller
    	device pci 17.0 on end	# 8086 0F50 - EMMC 4.5 Port (MMC1 pins) - Only 1 EMMC port at a time
@@ -68,7 +68,7 @@ chip soc/intel/fsp_baytrail
    	device pci 1c.1 on end	# 8086 0F4A - PCIe Root Port 2 (half mini pcie slot)
    	device pci 1c.2 on end	# 8086 0F4C - PCIe Root Port 3 (front x1 slot)
    	device pci 1c.3 on end	# 8086 0F4E - PCIe Root Port 4 (rear x1 slot)
-		device pci 1d.0 on end	# 8086 0F34 - USB EHCI - Only 1 USB controller at a time
+		device pci 1d.0 off end	# 8086 0F34 - USB EHCI - Only 1 USB controller at a time
    	device pci 1e.0 on end	# 8086 0F06 - SIO - DMA
    	device pci 1e.1 on end	# 8086 0F08 -   PWM 1
    	device pci 1e.2 on end	# 8086 0F09 -   PWM 2