Patch set updated for coreboot: da8eb7d i82801ix: Allow configuration of SATA mode in CMOS.
Vladimir Serbinenko (phcoder@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/6409
-gerrit
commit da8eb7d4e61188862c9e5eab783ba88fcda09859 Author: Vladimir Serbinenko phcoder@gmail.com Date: Tue Jul 29 22:35:45 2014 +0200
i82801ix: Allow configuration of SATA mode in CMOS.
Change-Id: Ice0f0273b16a946143c038a90b61978269c1c56e Signed-off-by: Vladimir Serbinenko phcoder@gmail.com --- src/mainboard/roda/rk9/cmos.layout | 5 ++++- src/mainboard/roda/rk9/devicetree.cb | 1 - src/southbridge/intel/i82801ix/chip.h | 2 -- src/southbridge/intel/i82801ix/sata.c | 23 ++++++++++++++++------- 4 files changed, 20 insertions(+), 11 deletions(-)
diff --git a/src/mainboard/roda/rk9/cmos.layout b/src/mainboard/roda/rk9/cmos.layout index 8f12ef4..ca439c9 100644 --- a/src/mainboard/roda/rk9/cmos.layout +++ b/src/mainboard/roda/rk9/cmos.layout @@ -85,7 +85,8 @@ entries #400 8 r 0 unused
# coreboot config options: southbridge -#408 8 r 0 unused +408 1 e 9 sata_mode +#409 7 r 0 unused
# coreboot config options: bootloader 416 512 s 0 boot_devices @@ -133,6 +134,8 @@ enumerations 7 2 Keep 8 0 No 8 1 Yes +9 0 AHCI +9 1 Compatible
# ----------------------------------------------------------------- checksums diff --git a/src/mainboard/roda/rk9/devicetree.cb b/src/mainboard/roda/rk9/devicetree.cb index 5989278..deece86 100644 --- a/src/mainboard/roda/rk9/devicetree.cb +++ b/src/mainboard/roda/rk9/devicetree.cb @@ -44,7 +44,6 @@ chip northbridge/intel/gm45 register "alt_gp_smi_en" = "0x0002"
# Set AHCI mode, enable ports 1 and 2. - register "sata_ahci" = "1" register "sata_port_map" = "0x03" register "sata_clock_request" = "0" register "sata_traffic_monitor" = "0" diff --git a/src/southbridge/intel/i82801ix/chip.h b/src/southbridge/intel/i82801ix/chip.h index 222cfb5..5e1221d 100644 --- a/src/southbridge/intel/i82801ix/chip.h +++ b/src/southbridge/intel/i82801ix/chip.h @@ -70,8 +70,6 @@ struct southbridge_intel_i82801ix_config { uint16_t alt_gp_smi_en;
/* IDE configuration */ - uint32_t ide_legacy_combined; - uint32_t sata_ahci; /* If enabled, keep bit 2 of sata_enabled unset. */ uint8_t sata_port_map : 6; int sata_clock_request : 1; int sata_traffic_monitor : 1; diff --git a/src/southbridge/intel/i82801ix/sata.c b/src/southbridge/intel/i82801ix/sata.c index 02f6d53..10c8a2b 100644 --- a/src/southbridge/intel/i82801ix/sata.c +++ b/src/southbridge/intel/i82801ix/sata.c @@ -25,6 +25,7 @@ #include <device/pci.h> #include <device/pci_ids.h> #include "i82801ix.h" +#include <pc80/mc146818rtc.h>
typedef struct southbridge_intel_i82801ix_config config_t;
@@ -149,6 +150,7 @@ static void sata_init(struct device *const dev)
const u16 devid = pci_read_config16(dev, PCI_DEVICE_ID); const int is_mobile = (devid == 0x2928) || (devid == 0x2929); + u8 sata_mode;
printk(BIOS_DEBUG, "i82801ix_sata: initializing...\n");
@@ -158,6 +160,10 @@ static void sata_init(struct device *const dev) return; }
+ if (get_option(&sata_mode, "sata_mode") != CB_SUCCESS) + /* Default to AHCI */ + sata_mode = 0; + /* * TODO: In contrast to ICH7 and PCH code we don't set * timings, dma and IDE-I/O settings here. Looks like they @@ -171,13 +177,11 @@ static void sata_init(struct device *const dev) PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | /* read-only in IDE modes */ PCI_COMMAND_IO); - if (!config->sata_ahci) + if (sata_mode != 0) /* No AHCI: clear AHCI base */ pci_write_config32(dev, PCI_BASE_ADDRESS_5, 0x00000000);
- if (config->ide_legacy_combined) { - printk(BIOS_DEBUG, "SATA controller in combined mode.\n"); - } else if (config->sata_ahci) { + if (sata_mode == 0) { printk(BIOS_DEBUG, "SATA controller in AHCI mode.\n"); } else { printk(BIOS_DEBUG, "SATA controller in native mode.\n"); @@ -193,7 +197,7 @@ static void sata_init(struct device *const dev) /* Port enable. For AHCI, it's managed in memory mapped space. */ reg16 = pci_read_config16(dev, 0x92); reg16 &= ~0x3f; - reg16 |= (1 << 15) | (config->sata_ahci ? 0x3f : config->sata_port_map); + reg16 |= (1 << 15) | ((sata_mode == 0) ? 0x3f : config->sata_port_map); pci_write_config16(dev, 0x92, reg16);
/* SATA clock settings */ @@ -218,7 +222,7 @@ static void sata_init(struct device *const dev) } }
- if (config->sata_ahci) + if (sata_mode == 0) sata_enable_ahci_mmap(dev, config->sata_port_map, is_mobile);
sata_program_indexed(dev, is_mobile); @@ -230,15 +234,20 @@ static void sata_enable(device_t dev) const config_t *const config = dev->chip_info;
u16 map = 0; + u8 sata_mode;
if (!config) return;
+ if (get_option(&sata_mode, "sata_mode") != CB_SUCCESS) + /* Default to AHCI */ + sata_mode = 0; + /* * Set SATA controller mode early so the resource allocator can * properly assign IO/Memory resources for the controller. */ - if (config->sata_ahci) + if (sata_mode == 0) map = 0x0040 | 0x0020; /* SATA mode + all ports on D31:F2 */
map |= (config->sata_port_map ^ 0x3f) << 8;
-
Vladimir Serbinenko