Change in coreboot[master]: [TEST] mb/google/brya/var/redrix: exchange i2c port for touchscreen/cr50

[Chen Wisley (Code Review)]

Attention is currently required from: Wisley Chen.
Hello Wisley Chen,

I'd like you to do a code review. Please visit

https://review.coreboot.org/c/coreboot/+/59349

to review the following change.

Change subject: [TEST] mb/google/brya/var/redrix: exchange i2c port for touchscreen/cr50
......................................................................

[TEST] mb/google/brya/var/redrix: exchange i2c port for touchscreen/cr50

Exchange i2c port for touchscreen and cr50.

BUG=none
TEST=build

Signed-off-by: Wisley Chen 
Change-Id: I8f3a1a20d98cd4cbfa6fc7cc31cb688761f9f763
---
M src/mainboard/google/brya/variants/redrix/overridetree.cb
1 file changed, 40 insertions(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/49/59349/1

diff --git a/src/mainboard/google/brya/variants/redrix/overridetree.cb b/src/mainboard/google/brya/variants/redrix/overridetree.cb
index 77e44e3..33c6695 100644
--- a/src/mainboard/google/brya/variants/redrix/overridetree.cb
+++ b/src/mainboard/google/brya/variants/redrix/overridetree.cb
@@ -255,8 +255,17 @@
    			register "generic.stop_off_delay_ms" = "1"
    			register "generic.has_power_resource" = "1"
    			register "hid_desc_reg_offset" = "0x01"
-				device i2c 0x15 on end
+				device i2c 0x15 on
+					probe HW_PHASE HW_PRE_DVT
+				end
    		end
+			chip drivers/i2c/tpm
+				register "hid" = ""GOOG0005""
+				register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_A13_IRQ)"
+				device i2c 50 on
+					probe HW_PHASE HW_AFTER_DVT
+				end
+                        end
    	end
    	device ref i2c2 on
    		chip drivers/intel/mipi_camera
@@ -358,6 +367,36 @@
    		end

end
+		device ref i2c3 on
+			chip drivers/i2c/tpm
+				register "hid" = ""GOOG0005""
+				register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_A13_IRQ)"
+				device i2c 50 on
+					probe HW_PHASE HW_PRE_DVT
+				end
+			end
+			chip drivers/i2c/hid
+				register "generic.hid" = ""ELAN2513""
+				register "generic.desc" = ""ELAN Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
+				register "generic.reset_delay_ms" = "300"
+				register "generic.reset_off_delay_ms" = "1"
+				register "generic.enable_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
+				register "generic.enable_delay_ms" = "6"
+				register "generic.stop_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
+				register "generic.stop_off_delay_ms" = "1"
+				register "generic.has_power_resource" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 0x15 on
+					probe HW_PHASE HW_AFTER_DVT
+				end
+			end
+		end
    	device ref i2c5 on
    		chip drivers/i2c/generic
    			register "hid" = ""ELAN0000""