Change in coreboot[master]: drivers/i2c: sx9310: Use open source variables

[Gwendal Grignou (Code Review)]

Attention is currently required from: Paul Menzel, Tim Wawrzynczak, Angel Pons, Julius Werner.
Gwendal Grignou has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/50210 )

Change subject: drivers/i2c: sx9310: Use open source variables
......................................................................

Patch Set 3:

(2 comments)

Commit Message:

https://review.coreboot.org/c/coreboot/+/50210/comment/f035890b_15da653c 
PS3, Line 7: drivers/i2c: sx9310: Use open source variables
> I guess it's about using more descriptive names

yes, the original driver in the kernel was using chip registers map to configure the SAR sensor, which is opaque, especially when the datasheet is not published widely.

File src/drivers/i2c/sx9310/sx9310.c:

https://review.coreboot.org/c/coreboot/+/50210/comment/46e8e038_183847a2 
PS3, Line 70: 	 *                      proximity/semtech,sx9310.yaml
> Where? In the Linux kernel?

Yes: https://www.kernel.org/doc/Documentation/devicetree/bindings/iio/proximity/s...