Patch set updated for coreboot: 32a2a77 asrock/e350m1/mainboard.c: Disable GPP CLK4 through GPP CLK8

[Paul Menzel]

Paul Menzel ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/5397

-gerrit

commit 32a2a77b1e3dd8dc97a1b7c06936a868b553a1d8
Author: Paul Menzel 
Date:   Sat Mar 22 23:22:29 2014 +0100

asrock/e350m1/mainboard.c: Disable GPP CLK4 through GPP CLK8

The Ethernet device does sometimes not show up when the system boots.
    The cause is not known, but it happens more often during reboot and
    when it has not shown up, the PSU has to be turned off until it shows
    up again. Disabling unused GPP clocks might help fixing this issue.

According to the SB800 Register Reference Guide [1] the clock pins are
    powered on (0xFF) by default. Powering off the clock pins for GPP4 to
    GPP8 but not the Gfx PCIe device, hopefully sets the Ethernet device
    up correctly, so it is always detected during start up and restarts.

The same was done for the board AMD Persimmon in commit 73be43a1 [2].

Persimmon: Disable the unused GPP PCIe clocks

Note that the board AMD Persimmon has a normal PCI slot, where the
    ASRock E350M1 has a PCIe 2.0 x16 slot, usable for example for external
    graphics cards. So leave the clock pins for the Gfx PCIe device
    powered on.

[1] AMD SB800-Series Southbridges Register Reference Guide
        Publication: #45482
        Revision: 3.04
    [2] http://review.coreboot.org/1876

Change-Id: Ibd839bb469f06cbbb8a50d6a0bc58ad967a1a5e1
    Fix-proposed-by: Edward O'Callaghan 
    Signed-off-by: Paul Menzel 
---
 src/mainboard/asrock/e350m1/mainboard.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/src/mainboard/asrock/e350m1/mainboard.c b/src/mainboard/asrock/e350m1/mainboard.c
index a98a179..61dcc33 100644
--- a/src/mainboard/asrock/e350m1/mainboard.c
+++ b/src/mainboard/asrock/e350m1/mainboard.c
@@ -25,6 +25,8 @@
 #include <cpu/amd/mtrr.h>
 #include <device/pci_def.h>
 #include <southbridge/amd/cimx/cimx_util.h>
+#include <agesawrapper.h>
+#include "SBPLATFORM.h"

//#define SMBUS_IO_BASE 0x6000
 void set_pcie_reset(void);
@@ -54,6 +56,15 @@ static void mainboard_enable(device_t dev)
 {
    printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");

+	/* enable GPP CLK0 thru CLK3 and SLT_GFX_CLK (interleaved) */
+	/* disable GPP CLK4 thru GPP CLK8 */
+	u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE);
+	*(misc_mem_clk_cntrl + 0) = 0xFF;
+	*(misc_mem_clk_cntrl + 1) = 0xFF;
+	*(misc_mem_clk_cntrl + 2) = 0x00;
+	*(misc_mem_clk_cntrl + 3) = 0x00;
+	*(misc_mem_clk_cntrl + 4) = 0xF0;
+
    /*
     * Initialize ASF registers to an arbitrary address because someone
     * long ago set things up this way inside the SPD read code.  The