[M] Change in coreboot[master]: common/acpi/dptc: Implement DTTS Proposal

[EricKY Cheng (Code Review)]

Attention is currently required from: Raul Rangel, Jason Nien, Matt DeVillier, Martin Roth, Tim Van Patten, Eric Peers, LeilaCY Lin, Jason Glenesk, Caveh Jalali, Tim Wawrzynczak, Fred Reitberger, Karthikeyan Ramasubramanian, Boris Mittelberg, Felix Held.

EricKY Cheng has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/68471 )

Change subject: common/acpi/dptc: Implement DTTS Proposal
......................................................................

Patch Set 32:

(2 comments)

File src/ec/google/chromeec/acpi/ec.asl:

https://review.coreboot.org/c/coreboot/+/68471/comment/c7fcad2a_6c203085 
PS21, Line 44: #if CONFIG(FEATURE_DYNAMIC_DPTC)
             : 	Name (PRTN, 0)		// Previous thermal table Label A(0) to F(5)
             : #endif
> Move this to `src/soc/amd/common/acpi/dptc.asl`, where it's used.

Done

File src/soc/amd/common/acpi/dptc.asl:

https://review.coreboot.org/c/coreboot/+/68471/comment/1194fb9c_49864aed 
PS21, Line 48:                                 (_SB.PCI0.LPCB.EC0.PRTN == 3) ||  // Previous table is D
             :                                 (_SB.PCI0.LPCB.EC0.PRTN == 5))    // Previous table is F
> Why is this checking if the previous table was D or F, when neither of those are related to desktop+ […]

Follow thermal team's proposal, A C E are temperature release table, B D E are temperature over table.
If Lid open/close or mode switch event trigger, temperature release tables will Translation to each other, temperature over tables will Translation to each other.
After that event trigger, EC will check the new temperature condition and decide if the temperature need to be trigger.

Update the code changes follow above thermal team's proposal