Stefan Reinauer (stefan.reinauer@coreboot.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4247
-gerrit
commit 812a5895f3e1fd240029585f62554076c4f0662a Author: Shawn Nematbakhsh shawnn@google.com Date: Tue Jun 11 20:30:09 2013 -0700
peppy: Add an inverted input GPIO type
The wake device input pins are active low and the GPIOs need to be set as inverted when they are marked as an input so they are not spuriously logged.
Also sync pin states from Falco initial commit.
Reference change: I15d38dcc9b2fb4b2b0eb27da358fa3c343e22323 Change-Id: I66e136d389d53a367436d816fa84dacdc8e86bad Reviewed-on: https://gerrit.chromium.org/gerrit/58334 Tested-by: Shawn Nematbakhsh shawnn@chromium.org Reviewed-by: Dave Parker dparker@chromium.org Commit-Queue: Shawn Nematbakhsh shawnn@chromium.org Signed-off-by: Shawn Nematbakhsh shawnn@google.com --- src/mainboard/google/peppy/gpio.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/src/mainboard/google/peppy/gpio.h b/src/mainboard/google/peppy/gpio.h index 6dfb98f..5cf1d3a 100644 --- a/src/mainboard/google/peppy/gpio.h +++ b/src/mainboard/google/peppy/gpio.h @@ -35,7 +35,7 @@ const struct pch_lp_gpio_map mainboard_gpio_map[] = { LP_GPIO_INPUT, /* 9: RAM_ID1 */ LP_GPIO_ACPI_SCI, /* 10: WLAN_WAKE_L_Q */ LP_GPIO_UNUSED, /* 11: UNUSED */ - LP_GPIO_IRQ_EDGE, /* 12: TRACKPAD_INT_L */ + LP_GPIO_INPUT_INVERT, /* 12: TRACKPAD_INT_L (WAKE) */ LP_GPIO_INPUT, /* 13: RAM_ID0 */ LP_GPIO_INPUT, /* 14: EC_IN_RW */ LP_GPIO_UNUSED, /* 15: UNUSED (STRAP) */ @@ -48,7 +48,7 @@ const struct pch_lp_gpio_map mainboard_gpio_map[] = { LP_GPIO_UNUSED, /* 22: UNUSED */ LP_GPIO_UNUSED, /* 23: UNUSED */ LP_GPIO_UNUSED, /* 24: UNUSED */ - LP_GPIO_IRQ_EDGE, /* 25: TOUCH_INT_L */ + LP_GPIO_INPUT_INVERT, /* 25: TOUCH_INT_L (WAKE) */ LP_GPIO_UNUSED, /* 26: UNUSED */ LP_GPIO_UNUSED, /* 27: UNUSED */ LP_GPIO_UNUSED, /* 28: UNUSED */ @@ -74,10 +74,10 @@ const struct pch_lp_gpio_map mainboard_gpio_map[] = { LP_GPIO_UNUSED, /* 48: UNUSED */ LP_GPIO_OUT_LOW, /* 49: PP3300_SSD_IO_EN (iSSD VCC_IO) */ LP_GPIO_UNUSED, /* 50: UNUSED */ - LP_GPIO_IRQ_EDGE, /* 51: ALS_INT_L */ - LP_GPIO_IRQ_EDGE, /* 52: SIM_DET */ - LP_GPIO_ACPI_SCI, /* 53: TRACKPAD_INT_DX (WAKE) */ - LP_GPIO_ACPI_SCI, /* 54: TOUCH_INT_L_DX (WAKE) */ + LP_GPIO_INPUT, /* 51: ALS_INT_L */ + LP_GPIO_INPUT, /* 52: SIM_DET */ + LP_GPIO_PIRQ, /* 53: TRACKPAD_INT_DX */ + LP_GPIO_PIRQ, /* 54: TOUCH_INT_L_DX */ LP_GPIO_UNUSED, /* 55: UNUSED */ LP_GPIO_UNUSED, /* 56: UNUSED */ LP_GPIO_OUT_HIGH, /* 57: PP3300_CCD_EN */
-
Stefan Reinauer