[XS] Change in coreboot[master]: mb/siemens/mc_apl1: Rename macro 'TX_DWORD3' to 'TX_DWORD3_P1'

[Mario Scheithauer (Code Review)]

Attention is currently required from: Mario Scheithauer, Werner Zeh.

Hello Paul Menzel, Werner Zeh, build bot (Jenkins),

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/76174?usp=email

to look at the new patch set (#2).

Change subject: mb/siemens/mc_apl1: Rename macro 'TX_DWORD3' to 'TX_DWORD3_P1'
......................................................................

mb/siemens/mc_apl1: Rename macro 'TX_DWORD3' to 'TX_DWORD3_P1'

The offset '0xa8c' for the High Speed I/O Transmit Control Register 3
refers to SATA port 1 only. To make this clear, change the name of the
define from 'TX_DWORD3' to 'TX_DWORD3_P1'.

Change-Id: I09d17eeffbe84939297e739586f6b74ed3e2258b
Signed-off-by: Mario Scheithauer 
---
M src/mainboard/siemens/mc_apl1/variants/mc_apl1/mainboard.c
1 file changed, 3 insertions(+), 3 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/74/76174/2