Patch set updated for coreboot: 2831050 UART 8250: Unconditionally provide register constants and use UART8250 prefix.
Isaac Christensen (isaac.christensen@se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/6715
-gerrit
commit 28310504864d5b3c5b842aaedd6af79d3dbee355 Author: Gabe Black gabeblack@google.com Date: Mon Sep 30 21:25:49 2013 -0700
UART 8250: Unconditionally provide register constants and use UART8250 prefix.
The register indexes and bitfield masks were guarded by the UART8250 config options, but it might be (is) necessary to use them in a driver that is UART8250 like without actually using the 8250 driver itself. To avoid any name collision with other drivers, also change the constant prefix from UART_ to UART8250_.
Change-Id: Ie606d9e0329132961c3004688176204a829569dc Signed-off-by: Gabe Black gabeblack@google.com Reviewed-on: https://chromium-review.googlesource.com/171336 Reviewed-by: Ronald Minnich rminnich@chromium.org Commit-Queue: Gabe Black gabeblack@chromium.org Tested-by: Gabe Black gabeblack@chromium.org (cherry picked from commit a93900be8d8a8260db49e30737608f9161fbf249) Signed-off-by: Isaac Christensen isaac.christensen@se-eng.com --- src/console/Kconfig | 2 +- src/cpu/allwinner/a10/uart.c | 16 ++--- src/drivers/uart/uart8250io.c | 24 +++---- src/drivers/uart/uart8250mem.c | 24 +++---- src/drivers/uart/uart8250reg.h | 138 ++++++++++++++++++++--------------------- 5 files changed, 102 insertions(+), 102 deletions(-)
diff --git a/src/console/Kconfig b/src/console/Kconfig index 8a2da1c..054177f 100644 --- a/src/console/Kconfig +++ b/src/console/Kconfig @@ -48,7 +48,7 @@ config UART_FOR_CONSOLE # program different LDN to actually change the physical port. config TTYS0_BASE hex - depends on DRIVERS_UART_8250IO + depends on DRIVERS_UART default 0x3f8 if UART_FOR_CONSOLE = 0 default 0x2f8 if UART_FOR_CONSOLE = 1 default 0x3e8 if UART_FOR_CONSOLE = 2 diff --git a/src/cpu/allwinner/a10/uart.c b/src/cpu/allwinner/a10/uart.c index feccc82..407bd86 100644 --- a/src/cpu/allwinner/a10/uart.c +++ b/src/cpu/allwinner/a10/uart.c @@ -22,19 +22,19 @@ static void a10_uart_configure(struct a10_uart *uart, u32 baud_rate, u8 data_bit div = (u16) uart_baudrate_divisor(baud_rate, uart_platform_refclk(), 16); /* Enable access to Divisor Latch register */ - write32(UART_LCR_DLAB, &uart->lcr); + write32(UART8250_LCR_DLAB, &uart->lcr); /* Set baudrate */ write32((div >> 8) & 0xff, &uart->dlh); write32(div & 0xff, &uart->dll); /* Set line control */ - reg32 = (data_bits - 5) & UART_LCR_WLS_MSK; + reg32 = (data_bits - 5) & UART8250_LCR_WLS_MSK; switch (parity) { case UART_PARITY_ODD: - reg32 |= UART_LCR_PEN; + reg32 |= UART8250_LCR_PEN; break; case UART_PARITY_EVEN: - reg32 |= UART_LCR_PEN; - reg32 |= UART_LCR_EPS; + reg32 |= UART8250_LCR_PEN; + reg32 |= UART8250_LCR_EPS; break; case UART_PARITY_NONE: /* Fall through */ default: @@ -45,7 +45,7 @@ static void a10_uart_configure(struct a10_uart *uart, u32 baud_rate, u8 data_bit
static void a10_uart_enable_fifos(struct a10_uart *uart) { - write32(UART_FCR_FIFO_EN, &uart->fcr); + write32(UART8250_FCR_FIFO_EN, &uart->fcr); }
static int tx_fifo_full(struct a10_uart *uart) @@ -54,12 +54,12 @@ static int tx_fifo_full(struct a10_uart *uart) * that the TX register is empty, not that the FIFO is not full, but * this may be due to a datasheet typo. Keep the current name to signal * intent. */ - return !(read32(&uart->lsr) & UART_LSR_THRE); + return !(read32(&uart->lsr) & UART8250_LSR_THRE); }
static int rx_fifo_empty(struct a10_uart *uart) { - return !(read32(&uart->lsr) & UART_LSR_DR); + return !(read32(&uart->lsr) & UART8250_LSR_DR); }
/** diff --git a/src/drivers/uart/uart8250io.c b/src/drivers/uart/uart8250io.c index f4a7b0a..f4f4d01 100644 --- a/src/drivers/uart/uart8250io.c +++ b/src/drivers/uart/uart8250io.c @@ -48,25 +48,25 @@
static int uart8250_can_tx_byte(unsigned base_port) { - return inb(base_port + UART_LSR) & UART_LSR_THRE; + return inb(base_port + UART8250_LSR) & UART8250_LSR_THRE; }
static void uart8250_tx_byte(unsigned base_port, unsigned char data) { unsigned long int i = SINGLE_CHAR_TIMEOUT; while (i-- && !uart8250_can_tx_byte(base_port)); - outb(data, base_port + UART_TBR); + outb(data, base_port + UART8250_TBR); }
static void uart8250_tx_flush(unsigned base_port) { unsigned long int i = FIFO_TIMEOUT; - while (i-- && !(inb(base_port + UART_LSR) & UART_LSR_TEMT)); + while (i-- && !(inb(base_port + UART8250_LSR) & UART8250_LSR_TEMT)); }
static int uart8250_can_rx_byte(unsigned base_port) { - return inb(base_port + UART_LSR) & UART_LSR_DR; + return inb(base_port + UART8250_LSR) & UART8250_LSR_DR; }
static unsigned char uart8250_rx_byte(unsigned base_port) @@ -75,7 +75,7 @@ static unsigned char uart8250_rx_byte(unsigned base_port) while (i-- && !uart8250_can_rx_byte(base_port));
if (i) - return inb(base_port + UART_RBR); + return inb(base_port + UART8250_RBR); else return 0x0; } @@ -84,22 +84,22 @@ static void uart8250_init(unsigned base_port, unsigned divisor) { DISABLE_TRACE; /* Disable interrupts */ - outb(0x0, base_port + UART_IER); + outb(0x0, base_port + UART8250_IER); /* Enable FIFOs */ - outb(UART_FCR_FIFO_EN, base_port + UART_FCR); + outb(UART8250_FCR_FIFO_EN, base_port + UART8250_FCR);
/* assert DTR and RTS so the other end is happy */ - outb(UART_MCR_DTR | UART_MCR_RTS, base_port + UART_MCR); + outb(UART8250_MCR_DTR | UART8250_MCR_RTS, base_port + UART8250_MCR);
/* DLAB on */ - outb(UART_LCR_DLAB | CONFIG_TTYS0_LCS, base_port + UART_LCR); + outb(UART8250_LCR_DLAB | CONFIG_TTYS0_LCS, base_port + UART8250_LCR);
/* Set Baud Rate Divisor. 12 ==> 9600 Baud */ - outb(divisor & 0xFF, base_port + UART_DLL); - outb((divisor >> 8) & 0xFF, base_port + UART_DLM); + outb(divisor & 0xFF, base_port + UART8250_DLL); + outb((divisor >> 8) & 0xFF, base_port + UART8250_DLM);
/* Set to 3 for 8N1 */ - outb(CONFIG_TTYS0_LCS, base_port + UART_LCR); + outb(CONFIG_TTYS0_LCS, base_port + UART8250_LCR); ENABLE_TRACE; }
diff --git a/src/drivers/uart/uart8250mem.c b/src/drivers/uart/uart8250mem.c index 976bcb6..79654f1 100644 --- a/src/drivers/uart/uart8250mem.c +++ b/src/drivers/uart/uart8250mem.c @@ -35,7 +35,7 @@
static int uart8250_mem_can_tx_byte(unsigned base_port) { - return read8(base_port + UART_LSR) & UART_LSR_THRE; + return read8(base_port + UART8250_LSR) & UART8250_LSR_THRE; }
static void uart8250_mem_tx_byte(unsigned base_port, unsigned char data) @@ -43,19 +43,19 @@ static void uart8250_mem_tx_byte(unsigned base_port, unsigned char data) unsigned long int i = SINGLE_CHAR_TIMEOUT; while(i-- && !uart8250_mem_can_tx_byte(base_port)) udelay(1); - write8(base_port + UART_TBR, data); + write8(base_port + UART8250_TBR, data); }
static void uart8250_mem_tx_flush(unsigned base_port) { unsigned long int i = FIFO_TIMEOUT; - while(i-- && !(read8(base_port + UART_LSR) & UART_LSR_TEMT)) + while(i-- && !(read8(base_port + UART8250_LSR) & UART8250_LSR_TEMT)) udelay(1); }
static int uart8250_mem_can_rx_byte(unsigned base_port) { - return read8(base_port + UART_LSR) & UART_LSR_DR; + return read8(base_port + UART8250_LSR) & UART8250_LSR_DR; }
static unsigned char uart8250_mem_rx_byte(unsigned base_port) @@ -64,7 +64,7 @@ static unsigned char uart8250_mem_rx_byte(unsigned base_port) while(i-- && !uart8250_mem_can_rx_byte(base_port)) udelay(1); if (i) - return read8(base_port + UART_RBR); + return read8(base_port + UART8250_RBR); else return 0x0; } @@ -72,21 +72,21 @@ static unsigned char uart8250_mem_rx_byte(unsigned base_port) static void uart8250_mem_init(unsigned base_port, unsigned divisor) { /* Disable interrupts */ - write8(base_port + UART_IER, 0x0); + write8(base_port + UART8250_IER, 0x0); /* Enable FIFOs */ - write8(base_port + UART_FCR, UART_FCR_FIFO_EN); + write8(base_port + UART8250_FCR, UART8250_FCR_FIFO_EN);
/* Assert DTR and RTS so the other end is happy */ - write8(base_port + UART_MCR, UART_MCR_DTR | UART_MCR_RTS); + write8(base_port + UART8250_MCR, UART8250_MCR_DTR | UART8250_MCR_RTS);
/* DLAB on */ - write8(base_port + UART_LCR, UART_LCR_DLAB | CONFIG_TTYS0_LCS); + write8(base_port + UART8250_LCR, UART8250_LCR_DLAB | CONFIG_TTYS0_LCS);
- write8(base_port + UART_DLL, divisor & 0xFF); - write8(base_port + UART_DLM, (divisor >> 8) & 0xFF); + write8(base_port + UART8250_DLL, divisor & 0xFF); + write8(base_port + UART8250_DLM, (divisor >> 8) & 0xFF);
/* Set to 3 for 8N1 */ - write8(base_port + UART_LCR, CONFIG_TTYS0_LCS); + write8(base_port + UART8250_LCR, CONFIG_TTYS0_LCS); }
void uart_init(int idx) diff --git a/src/drivers/uart/uart8250reg.h b/src/drivers/uart/uart8250reg.h index cdfbb1b..2720b8d 100644 --- a/src/drivers/uart/uart8250reg.h +++ b/src/drivers/uart/uart8250reg.h @@ -21,88 +21,88 @@ #define UART8250REG_H
/* Data */ -#define UART_RBR 0x00 -#define UART_TBR 0x00 +#define UART8250_RBR 0x00 +#define UART8250_TBR 0x00
/* Control */ -#define UART_IER 0x01 -#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ -#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ -#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ -#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ +#define UART8250_IER 0x01 +#define UART8250_IER_MSI 0x08 /* Enable Modem status interrupt */ +#define UART8250_IER_RLSI 0x04 /* Enable receiver line status interrupt */ +#define UART8250_IER_THRI 0x02 /* Enable Transmitter holding register int. */ +#define UART8250_IER_RDI 0x01 /* Enable receiver data interrupt */
-#define UART_IIR 0x02 -#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ -#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ +#define UART8250_IIR 0x02 +#define UART8250_IIR_NO_INT 0x01 /* No interrupts pending */ +#define UART8250_IIR_ID 0x06 /* Mask for the interrupt ID */
-#define UART_IIR_MSI 0x00 /* Modem status interrupt */ -#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ -#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ -#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ +#define UART8250_IIR_MSI 0x00 /* Modem status interrupt */ +#define UART8250_IIR_THRI 0x02 /* Transmitter holding register empty */ +#define UART8250_IIR_RDI 0x04 /* Receiver data interrupt */ +#define UART8250_IIR_RLSI 0x06 /* Receiver line status interrupt */
-#define UART_FCR 0x02 -#define UART_FCR_FIFO_EN 0x01 /* Fifo enable */ -#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ -#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ -#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */ -#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */ -#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */ -#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */ -#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */ -#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */ +#define UART8250_FCR 0x02 +#define UART8250_FCR_FIFO_EN 0x01 /* Fifo enable */ +#define UART8250_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ +#define UART8250_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ +#define UART8250_FCR_DMA_SELECT 0x08 /* For DMA applications */ +#define UART8250_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */ +#define UART8250_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */ +#define UART8250_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */ +#define UART8250_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */ +#define UART8250_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */
-#define UART_FCR_RXSR 0x02 /* Receiver soft reset */ -#define UART_FCR_TXSR 0x04 /* Transmitter soft reset */ +#define UART8250_FCR_RXSR 0x02 /* Receiver soft reset */ +#define UART8250_FCR_TXSR 0x04 /* Transmitter soft reset */
-#define UART_LCR 0x03 -#define UART_LCR_WLS_MSK 0x03 /* character length select mask */ -#define UART_LCR_WLS_5 0x00 /* 5 bit character length */ -#define UART_LCR_WLS_6 0x01 /* 6 bit character length */ -#define UART_LCR_WLS_7 0x02 /* 7 bit character length */ -#define UART_LCR_WLS_8 0x03 /* 8 bit character length */ -#define UART_LCR_STB 0x04 /* Number of stop Bits, off = 1, on = 1.5 or 2) */ -#define UART_LCR_PEN 0x08 /* Parity enable */ -#define UART_LCR_EPS 0x10 /* Even Parity Select */ -#define UART_LCR_STKP 0x20 /* Stick Parity */ -#define UART_LCR_SBRK 0x40 /* Set Break */ -#define UART_LCR_BKSE 0x80 /* Bank select enable */ -#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ +#define UART8250_LCR 0x03 +#define UART8250_LCR_WLS_MSK 0x03 /* character length select mask */ +#define UART8250_LCR_WLS_5 0x00 /* 5 bit character length */ +#define UART8250_LCR_WLS_6 0x01 /* 6 bit character length */ +#define UART8250_LCR_WLS_7 0x02 /* 7 bit character length */ +#define UART8250_LCR_WLS_8 0x03 /* 8 bit character length */ +#define UART8250_LCR_STB 0x04 /* Number of stop Bits, off = 1, on = 1.5 or 2) */ +#define UART8250_LCR_PEN 0x08 /* Parity enable */ +#define UART8250_LCR_EPS 0x10 /* Even Parity Select */ +#define UART8250_LCR_STKP 0x20 /* Stick Parity */ +#define UART8250_LCR_SBRK 0x40 /* Set Break */ +#define UART8250_LCR_BKSE 0x80 /* Bank select enable */ +#define UART8250_LCR_DLAB 0x80 /* Divisor latch access bit */
-#define UART_MCR 0x04 -#define UART_MCR_DTR 0x01 /* DTR */ -#define UART_MCR_RTS 0x02 /* RTS */ -#define UART_MCR_OUT1 0x04 /* Out 1 */ -#define UART_MCR_OUT2 0x08 /* Out 2 */ -#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ +#define UART8250_MCR 0x04 +#define UART8250_MCR_DTR 0x01 /* DTR */ +#define UART8250_MCR_RTS 0x02 /* RTS */ +#define UART8250_MCR_OUT1 0x04 /* Out 1 */ +#define UART8250_MCR_OUT2 0x08 /* Out 2 */ +#define UART8250_MCR_LOOP 0x10 /* Enable loopback test mode */
-#define UART_MCR_DMA_EN 0x04 -#define UART_MCR_TX_DFR 0x08 +#define UART8250_MCR_DMA_EN 0x04 +#define UART8250_MCR_TX_DFR 0x08
-#define UART_DLL 0x00 -#define UART_DLM 0x01 +#define UART8250_DLL 0x00 +#define UART8250_DLM 0x01
/* Status */ -#define UART_LSR 0x05 -#define UART_LSR_DR 0x01 /* Data ready */ -#define UART_LSR_OE 0x02 /* Overrun */ -#define UART_LSR_PE 0x04 /* Parity error */ -#define UART_LSR_FE 0x08 /* Framing error */ -#define UART_LSR_BI 0x10 /* Break */ -#define UART_LSR_THRE 0x20 /* Xmit holding register empty */ -#define UART_LSR_TEMT 0x40 /* Xmitter empty */ -#define UART_LSR_ERR 0x80 /* Error */ +#define UART8250_LSR 0x05 +#define UART8250_LSR_DR 0x01 /* Data ready */ +#define UART8250_LSR_OE 0x02 /* Overrun */ +#define UART8250_LSR_PE 0x04 /* Parity error */ +#define UART8250_LSR_FE 0x08 /* Framing error */ +#define UART8250_LSR_BI 0x10 /* Break */ +#define UART8250_LSR_THRE 0x20 /* Xmit holding register empty */ +#define UART8250_LSR_TEMT 0x40 /* Xmitter empty */ +#define UART8250_LSR_ERR 0x80 /* Error */
-#define UART_MSR 0x06 -#define UART_MSR_DCD 0x80 /* Data Carrier Detect */ -#define UART_MSR_RI 0x40 /* Ring Indicator */ -#define UART_MSR_DSR 0x20 /* Data Set Ready */ -#define UART_MSR_CTS 0x10 /* Clear to Send */ -#define UART_MSR_DDCD 0x08 /* Delta DCD */ -#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ -#define UART_MSR_DDSR 0x02 /* Delta DSR */ -#define UART_MSR_DCTS 0x01 /* Delta CTS */ +#define UART8250_MSR 0x06 +#define UART8250_MSR_DCD 0x80 /* Data Carrier Detect */ +#define UART8250_MSR_RI 0x40 /* Ring Indicator */ +#define UART8250_MSR_DSR 0x20 /* Data Set Ready */ +#define UART8250_MSR_CTS 0x10 /* Clear to Send */ +#define UART8250_MSR_DDCD 0x08 /* Delta DCD */ +#define UART8250_MSR_TERI 0x04 /* Trailing edge ring indicator */ +#define UART8250_MSR_DDSR 0x02 /* Delta DSR */ +#define UART8250_MSR_DCTS 0x01 /* Delta CTS */
-#define UART_SCR 0x07 -#define UART_SPR 0x07 +#define UART8250_SCR 0x07 +#define UART8250_SPR 0x07
#endif /* UART8250REG_H */
-
Isaac Christensen