Patch set updated for coreboot: src/Kconfig: Remove 'default n' statements from early in Kconfig

[Martin Roth]

Martin Roth ([e-mail]) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/17908

-gerrit

commit 077e7f3cbd5fa9878fba6e45a49c43907a511a91
Author: Martin Roth 
Date:   Thu Dec 15 15:35:12 2016 -0700

src/Kconfig: Remove 'default n' statements from early in Kconfig

For boolean types, 'n' is the default default value - it doesn't
    NEED to be set.  If it IS set, it prevents a later default from
    being set.  So by removing the 'default n' statements from the
    early symbols, they can be overridden other places in the tree.

Verified that this makes no significant changes to any config file.

Change-Id: I1b5b66bd8a3df8154a348b5272c56c88829b3ab4
    Signed-off-by: Martin Roth 
---
 src/Kconfig | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/src/Kconfig b/src/Kconfig
index c0776d8..84ea565 100644
--- a/src/Kconfig
+++ b/src/Kconfig
@@ -111,7 +111,6 @@ config SCONFIG_GENPARSER

config USE_OPTION_TABLE
    bool "Use CMOS for configuration values"
-	default n
    depends on HAVE_OPTION_TABLE
    help
      Enable this option if coreboot shall read options from the "CMOS"
@@ -119,7 +118,6 @@ config USE_OPTION_TABLE

config STATIC_OPTION_TABLE
    bool "Load default configuration values into CMOS on each boot"
-	default n
    depends on USE_OPTION_TABLE
    help
      Enable this option to reset "CMOS" NVRAM values to default on
@@ -179,14 +177,12 @@ config INCLUDE_CONFIG_FILE

config COLLECT_TIMESTAMPS
    bool "Create a table of timestamps collected during boot"
-	default n
    help
      Make coreboot create a table of timer-ID/timer-value pairs to
      allow measuring time spent at different phases of the boot process.

config USE_BLOBS
    bool "Allow use of binary-only repository"
-	default n
    help
      This draws in the blobs repository, which contains binary files that
      might be required for some chipsets or boards.
@@ -195,7 +191,6 @@ config USE_BLOBS
 config COVERAGE
    bool "Code coverage support"
    depends on COMPILER_GCC
-	default n
    help
      Add code coverage support for coreboot. This will store code
      coverage information in CBMEM for extraction from user space.
@@ -204,7 +199,6 @@ config COVERAGE
 config RELOCATABLE_RAMSTAGE
    depends on EARLY_CBMEM_INIT
    bool "Build the ramstage to be relocatable in 32-bit address space."
-	default n
    select RELOCATABLE_MODULES
    help
     The reloctable ramstage support allows for the ramstage to be built
@@ -216,7 +210,6 @@ config RELOCATABLE_RAMSTAGE
 config CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM
    depends on RELOCATABLE_RAMSTAGE
    bool "Cache the relocated ramstage outside of cbmem."
-	default n
    help
     The relocated ramstage is saved in an area specified by the
     by the board and/or chipset.
@@ -241,7 +234,6 @@ config BOOTBLOCK_SOURCE

config SKIP_MAX_REBOOT_CNT_CLEAR
    bool "Do not clear reboot count after successful boot"
-	default n
    depends on BOOTBLOCK_NORMAL
    help
      Do not clear the reboot count immediately after successful boot.
@@ -251,7 +243,6 @@ config SKIP_MAX_REBOOT_CNT_CLEAR

config UPDATE_IMAGE
    bool "Update existing coreboot.rom image"
-	default n
    help
      If this option is enabled, no new coreboot.rom file
      is created. Instead it is expected that there already
@@ -270,7 +261,6 @@ config BOARD_ID_STRING

config RAM_CODE_SUPPORT
    bool
-	default n
    help
      If enabled, coreboot discovers RAM configuration (value obtained by
      reading board straps) and stores it in coreboot table.