Patch set updated for coreboot: 103b224 google/rush: Add I2C1 init and audio clock enable/resets

[Patrick Georgi]

Patrick Georgi ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/9429

-gerrit

commit 103b224aa68bb09b22287fc9930315a157ec6fc5
Author: Tom Warren 
Date:   Thu Nov 13 13:16:28 2014 -0700

google/rush: Add I2C1 init and audio clock enable/resets

This should allow the max98090 codec to play beeps via
    AHUB/I2S1 thru the depthcharge sound driver.

BUG=none
    BRANCH=none
    TEST=Saw max98090 codec init signon and register dump.
    No sound yet.

Change-Id: I1ee0b61f5cbfe587ebd16b7dd9dce08d9d62c2c5
    Signed-off-by: Patrick Georgi 
    Original-Commit-Id: f4ee2ce3704711a9e00531b7599a1bcf194203ec
    Original-Change-Id: I0bc8401e76b2c80a01083ac933a39f6cd4d1b78a
    Original-Signed-off-by: Tom Warren 
    Original-Reviewed-on: https://chromium-review.googlesource.com/229496
    Original-Reviewed-by: Aaron Durbin 
    Original-Commit-Queue: Mike Frysinger 
---
 src/mainboard/google/rush/mainboard.c       | 41 ++++++++++++++++++++++++++---
 src/soc/nvidia/tegra132/include/soc/clock.h |  5 ++++
 2 files changed, 43 insertions(+), 3 deletions(-)

diff --git a/src/mainboard/google/rush/mainboard.c b/src/mainboard/google/rush/mainboard.c
index 8ea3f4e..bb4da19 100644
--- a/src/mainboard/google/rush/mainboard.c
+++ b/src/mainboard/google/rush/mainboard.c
@@ -25,6 +25,7 @@
 #include <soc/clk_rst.h>
 #include <soc/clock.h>
 #include <soc/funitcfg.h>
+#include <soc/nvidia/tegra/i2c.h>
 #include <soc/nvidia/tegra/usb.h>
 #include <soc/padconfig.h>
 #include <soc/spi.h>
@@ -67,9 +68,16 @@ static const struct pad_config padcfgs[] = {
    PAD_CFG_GPIO_INPUT(USB_VBUS_EN1, PINMUX_PULL_UP),
 };

+static const struct pad_config i2c1_pad[] = {
+	/* GEN1 I2C */
+	PAD_CFG_SFIO(GEN1_I2C_SCL, PINMUX_INPUT_ENABLE, I2C1),
+	PAD_CFG_SFIO(GEN1_I2C_SDA, PINMUX_INPUT_ENABLE, I2C1),
+};
+
 static const struct funit_cfg funitcfgs[] = {
    FUNIT_CFG(SDMMC3, PLLP, 48000, sdmmc3_pad, ARRAY_SIZE(sdmmc3_pad)),
    FUNIT_CFG(SDMMC4, PLLP, 48000, sdmmc4_pad, ARRAY_SIZE(sdmmc4_pad)),
+	FUNIT_CFG(I2C1, PLLP, 100, i2c1_pad, ARRAY_SIZE(i2c1_pad)),
 };

static void setup_ec_spi(void)
@@ -87,6 +95,30 @@ static void setup_usb(void)
    usb_setup_utmip((void *)TEGRA_USB3_BASE);
 }

+/* Audio init: clocks and enables/resets */
+static void setup_audio(void)
+{
+	/* External peripheral 1: audio codec (max98090) using 12MHz CLK1 */
+	clock_configure_source(extperiph1, CLK_M, 12000);
+
+	/*
+	 * We need 1.5MHz for I2S1. So, we use CLK_M. CLK_DIVIDER macro
+	 * returns a divisor (0xe) a little bit off from the ideal value (0xd),
+	 * but it's good enough for beeps.
+	 */
+	clock_configure_source(i2s1, CLK_M, 1500);
+
+	clock_external_output(1);	/* For external MAX98090 audio codec. */
+
+	/*
+	 * Confirmed by NVIDIA hardware team, we need to take ALL audio devices
+	 * connected to AHUB (AUDIO, APBIF, I2S, DAM, AMX, ADX, SPDIF, AFC) out
+	 * of reset and clock-enabled, otherwise reading AHUB devices (in our
+	 * case, I2S/APBIF/AUDIO<XBAR>) will hang.
+	 */
+	clock_enable_audio();
+}
+
 static void mainboard_init(device_t dev)
 {
    soc_configure_pads(padcfgs, ARRAY_SIZE(padcfgs));
@@ -94,14 +126,17 @@ static void mainboard_init(device_t dev)

setup_ec_spi();
    setup_usb();
+
+	setup_audio();
+	i2c_init(I2C1_BUS);		/* for max98090 codec */
 }

static void mainboard_enable(device_t dev)
 {
-        dev->ops->init = &mainboard_init;
+	dev->ops->init = &mainboard_init;
 }

struct chip_operations mainboard_ops = {
-        .name   = "rush",
-        .enable_dev = mainboard_enable,
+	.name   = "rush",
+	.enable_dev = mainboard_enable,
 };
diff --git a/src/soc/nvidia/tegra132/include/soc/clock.h b/src/soc/nvidia/tegra132/include/soc/clock.h
index f0d05e1..e62e0aa 100644
--- a/src/soc/nvidia/tegra132/include/soc/clock.h
+++ b/src/soc/nvidia/tegra132/include/soc/clock.h
@@ -187,6 +187,9 @@ enum {
    PLLE = 7,
    PLLA = 8,
    UNUSED = 100,
+	UNUSED1 = 101,
+	UNUSED2 = 102,
+	UNUSED3 = 103,
 };

#define CLK_SRC_DEV_ID(dev, src)	CLK_SRC_##dev##_##src
@@ -221,6 +224,8 @@ enum {
    CLK_SRC_DEVICE(SDMMC3, PLLP, PLLC2, PLLC, PLLC3, PLLM, PLLE, CLK_M),
    CLK_SRC_DEVICE(SDMMC4, PLLP, PLLC2, PLLC, PLLC3, PLLM, PLLE, CLK_M),
    CLK_SRC_DEVICE(UARTA, PLLP, PLLC2, PLLC, PLLC3, PLLM, UNUSED, CLK_M),
+	CLK_SRC_DEVICE(i2s1, PLLA, UNUSED, CLK_S, UNUSED1, PLLP, UNUSED2, CLK_M),
+	CLK_SRC_DEVICE(extperiph1, PLLA, CLK_S, PLLP, CLK_M, PLLE, UNUSED, UNUSED1),
 };

/* PLL stabilization delay in usec */