Kyösti Mälkki has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31271
Change subject: binaryPI: Drop nested northbridge in devicetree ......................................................................
binaryPI: Drop nested northbridge in devicetree
SPD data needs to remain within same chip -block with device 0:18.2.
Change-Id: Ic12481b637ee5f5119faec3239b477f613e4e511 Signed-off-by: Kyösti Mälkki kyosti.malkki@gmail.com --- M src/mainboard/amd/bettong/devicetree.cb M src/mainboard/amd/db-ft3b-lc/devicetree.cb M src/mainboard/amd/lamar/devicetree.cb M src/mainboard/amd/olivehillplus/devicetree.cb M src/mainboard/bap/ode_e21XX/devicetree.cb M src/mainboard/pcengines/apu2/variants/apu2/devicetree.cb M src/mainboard/pcengines/apu2/variants/apu3/devicetree.cb M src/mainboard/pcengines/apu2/variants/apu4/devicetree.cb M src/mainboard/pcengines/apu2/variants/apu5/devicetree.cb 9 files changed, 491 insertions(+), 501 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/71/31271/1
diff --git a/src/mainboard/amd/bettong/devicetree.cb b/src/mainboard/amd/bettong/devicetree.cb index a259e92..84aaf41 100644 --- a/src/mainboard/amd/bettong/devicetree.cb +++ b/src/mainboard/amd/bettong/devicetree.cb @@ -21,53 +21,54 @@
device domain 0 on subsystemid 0x1022 0x1410 inherit - chip northbridge/amd/pi/00660F01 # CPU side of HT root complex
- chip northbridge/amd/pi/00660F01 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 - device pci 1.1 on end # Internal Multimedia - device pci 2.0 on end # PCIe Host Bridge - device pci 2.1 on end # x4 PCIe slot - device pci 2.2 on end # mPCIe slot - device pci 2.3 on end # Realtek NIC - device pci 2.4 on end # Edge Connector - device pci 2.5 on end # Edge Connector - device pci 3.0 on end # Edge Connector - device pci 3.1 on end # Edge Connector - end #chip northbridge/amd/pi/00660F01 + chip northbridge/amd/pi/00660F01 + device pci 0.0 on end # Root Complex + device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 + device pci 1.1 on end # Internal Multimedia + device pci 2.0 on end # PCIe Host Bridge + device pci 2.1 on end # x4 PCIe slot + device pci 2.2 on end # mPCIe slot + device pci 2.3 on end # Realtek NIC + device pci 2.4 on end # Edge Connector + device pci 2.5 on end # Edge Connector + device pci 3.0 on end # Edge Connector + device pci 3.1 on end # Edge Connector + end #chip northbridge/amd/pi/00660F01
- chip southbridge/amd/pi/hudson # it is under NB/SB Link, but on the same pci bus - device pci 9.0 on end # HDA - device pci 9.2 on end # HDA - device pci 10.0 on end # USB - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - end # SM - #device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on end # LPC 0x439d - device pci 14.7 on end # SD - end #chip southbridge/amd/pi/hudson + chip southbridge/amd/pi/hudson + device pci 9.0 on end # HDA + device pci 9.2 on end # HDA + device pci 10.0 on end # USB + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + end # SM + #device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on end # LPC 0x439d + device pci 14.7 on end # SD + end #chip southbridge/amd/pi/hudson
+ chip northbridge/amd/pi/00660F01 device pci 18.0 on end device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end device pci 18.4 on end device pci 18.5 on end + register "spdAddrLookup" = " { { {0xA0, 0xA4}, {0xA2, 0xA6}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses }" + end
- end #chip northbridge/amd/pi/00660F01 # CPU side of HT root complex end #domain end #northbridge/amd/pi/00660F01/root_complex diff --git a/src/mainboard/amd/db-ft3b-lc/devicetree.cb b/src/mainboard/amd/db-ft3b-lc/devicetree.cb index 1faebf4..dfbe3e2 100644 --- a/src/mainboard/amd/db-ft3b-lc/devicetree.cb +++ b/src/mainboard/amd/db-ft3b-lc/devicetree.cb @@ -22,42 +22,40 @@
device domain 0 on subsystemid 0x1022 0x1410 inherit - chip northbridge/amd/pi/00730F01 # CPU side of HT root complex
- chip northbridge/amd/pi/00730F01 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 0.2 off end # IOMMU - device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 - device pci 1.1 on end # Internal Multimedia - device pci 2.0 on end # PCIe Host Bridge - device pci 2.1 on end # x4 PCIe slot - device pci 2.2 on end # mPCIe slot - device pci 2.3 on end # Realtek NIC - device pci 2.4 off end # Edge Connector - device pci 2.5 off end # Edge Connector - device pci 8.0 off end # Platform Security Processor - end #chip northbridge/amd/pi/00730F01 + chip northbridge/amd/pi/00730F01 + device pci 0.0 on end # Root Complex + device pci 0.2 off end # IOMMU + device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 + device pci 1.1 on end # Internal Multimedia + device pci 2.0 on end # PCIe Host Bridge + device pci 2.1 on end # x4 PCIe slot + device pci 2.2 on end # mPCIe slot + device pci 2.3 on end # Realtek NIC + device pci 2.4 off end # Edge Connector + device pci 2.5 off end # Edge Connector + device pci 8.0 off end # Platform Security Processor + end #chip northbridge/amd/pi/00730F01
- chip southbridge/amd/pi/hudson # it is under NB/SB Link, but on the same pci bus - device pci 10.0 on end # XHCI HC0 - device pci 11.0 on end # SATA - device pci 12.0 on end # EHCI #0 - device pci 13.0 on end # EHCI #1 - device pci 14.0 on end # SMBus - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on end # LPC 0x439d - device pci 14.7 on end # SD - device pci 16.0 on end # EHCI #2 - register "sd_mode" = "3" - end #chip southbridge/amd/pi/hudson + chip southbridge/amd/pi/hudson + device pci 10.0 on end # XHCI HC0 + device pci 11.0 on end # SATA + device pci 12.0 on end # EHCI #0 + device pci 13.0 on end # EHCI #1 + device pci 14.0 on end # SMBus + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on end # LPC 0x439d + device pci 14.7 on end # SD + device pci 16.0 on end # EHCI #2 + register "sd_mode" = "3" + end #chip southbridge/amd/pi/hudson
- device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end
- end #chip northbridge/amd/pi/00730F01 # CPU side of HT root complex end #domain end #northbridge/amd/pi/00730F01/root_complex diff --git a/src/mainboard/amd/lamar/devicetree.cb b/src/mainboard/amd/lamar/devicetree.cb index 593f95b..d7f3f05 100644 --- a/src/mainboard/amd/lamar/devicetree.cb +++ b/src/mainboard/amd/lamar/devicetree.cb @@ -22,81 +22,81 @@
device domain 0 on subsystemid 0x1022 0x1410 inherit - chip northbridge/amd/pi/00630F01 # CPU side of HT root complex
- chip northbridge/amd/pi/00630F01 # PCI side of HT root complex - device pci 0.0 on end # 0x1422 Root Complex - device pci 0.2 off end # 0x1423 IOMMU - device pci 1.0 on end # 0x13XX Internal Graphics - device pci 1.1 on end # 0x1308 DisplayPort/HDMI Audio - device pci 2.0 on end # 0x1424 GFX PCIe Host Bridge - device pci 2.1 on end # 0x1425 P2P Bridge for GFX PCIe Port 0 (PCIe x16 slot J119) - device pci 2.2 off end # 0x1425 P2P Bridge for GFX PCIe Port 1 - device pci 3.0 on end # 0x1424 GPP PCIe Host Bridge - device pci 3.1 on end # 0x1426 P2P Bridge for GPP PCIe Port 0 (PCIe x4 slot J118) - device pci 3.2 on end # 0x1426 P2P Bridge for GPP PCIe Port 1 (PCIe x4 slot J120) - device pci 3.3 off end # 0x1426 P2P Bridge for GPP PCIe Port 2 - device pci 3.4 off end # 0x1426 P2P Bridge for GPP PCIe Port 3 - device pci 3.5 off end # 0x1426 P2P Bridge for GPP PCIe Port 4 - device pci 4.0 on end # 0x1424 UMI PCIe Host Bridge + chip northbridge/amd/pi/00630F01 + device pci 0.0 on end # 0x1422 Root Complex + device pci 0.2 off end # 0x1423 IOMMU + device pci 1.0 on end # 0x13XX Internal Graphics + device pci 1.1 on end # 0x1308 DisplayPort/HDMI Audio + device pci 2.0 on end # 0x1424 GFX PCIe Host Bridge + device pci 2.1 on end # 0x1425 P2P Bridge for GFX PCIe Port 0 (PCIe x16 slot J119) + device pci 2.2 off end # 0x1425 P2P Bridge for GFX PCIe Port 1 + device pci 3.0 on end # 0x1424 GPP PCIe Host Bridge + device pci 3.1 on end # 0x1426 P2P Bridge for GPP PCIe Port 0 (PCIe x4 slot J118) + device pci 3.2 on end # 0x1426 P2P Bridge for GPP PCIe Port 1 (PCIe x4 slot J120) + device pci 3.3 off end # 0x1426 P2P Bridge for GPP PCIe Port 2 + device pci 3.4 off end # 0x1426 P2P Bridge for GPP PCIe Port 3 + device pci 3.5 off end # 0x1426 P2P Bridge for GPP PCIe Port 4 + device pci 4.0 on end # 0x1424 UMI PCIe Host Bridge # device pci 4.1 on end # 0x1426 P2P bridge for UMI link # device pci 4.2 off end # 0x1426 Virtual P2P bridge for SB PCIe Port 3 # device pci 4.3 off end # 0x1426 Virtual P2P bridge for SB PCIe Port 2 # device pci 4.4 off end # 0x1426 Virtual P2P bridge for SB PCIe Port 1 # device pci 4.5 off end # 0x1426 Virtual P2P bridge for SB PCIe Port 0 - end #chip northbridge/amd/pi/00630F01 + end #chip northbridge/amd/pi/00630F01
- chip southbridge/amd/pi/hudson - device pci 10.0 on end # 0x7814 XHCI HC0 - device pci 10.1 on end # 0x7814 XHCI HC1 - device pci 11.0 on end # 0x7800-0x7805 SATA (device ID depends on mode) - device pci 12.0 on end # 0x7807 USB OHCI - device pci 12.2 on end # 0x7808 USB EHCI - device pci 13.0 on end # 0x7807 USB OHCI - device pci 13.2 on end # 0x7808 USB EHCI - device pci 14.0 on # 0x780B SMBus - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end + chip southbridge/amd/pi/hudson + device pci 10.0 on end # 0x7814 XHCI HC0 + device pci 10.1 on end # 0x7814 XHCI HC1 + device pci 11.0 on end # 0x7800-0x7805 SATA (device ID depends on mode) + device pci 12.0 on end # 0x7807 USB OHCI + device pci 12.2 on end # 0x7808 USB EHCI + device pci 13.0 on end # 0x7807 USB OHCI + device pci 13.2 on end # 0x7808 USB EHCI + device pci 14.0 on # 0x780B SMBus + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + end # SM + device pci 14.1 on end # 0x780C IDE + device pci 14.2 on end # 0x780D HDA + device pci 14.3 on # 0x780E LPC + chip superio/fintek/f81216h + register "conf_key_mode" = "0x77" + device pnp 4e.0 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end + device pnp 4e.1 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - end # SM - device pci 14.1 on end # 0x780C IDE - device pci 14.2 on end # 0x780D HDA - device pci 14.3 on # 0x780E LPC - chip superio/fintek/f81216h - register "conf_key_mode" = "0x77" - device pnp 4e.0 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.1 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 4e.2 off end # COM3 - device pnp 4e.3 off end # COM4 - device pnp 4e.8 off end # WDT - end # f81865f - end #LPC - device pci 14.4 on end # 0x780F PCI :: PCI-b conflict with GPIO. - device pci 14.5 on end # 0x7809 USB OHCI - device pci 14.7 on end # 0x7806 SD Flash Controller - device pci 15.0 on end # 0x43A0 SB GPP Port 0 (Integrated Realtek GbE Controller) - device pci 15.1 on end # 0x43A1 SB GPP Port 1 (mPCIe slot J122) - device pci 15.2 on end # 0x43A2 SB GPP Port 2 (mPCIe slot J123) - device pci 15.3 off end # 0x43A3 SB GPP Port 3 - register "gpp_configuration" = "4" - device pci 16.0 on end # 0x7809 USB OHCI (when the xHCI device is disabled) - end #southbridge/amd/pi/hudson + device pnp 4e.2 off end # COM3 + device pnp 4e.3 off end # COM4 + device pnp 4e.8 off end # WDT + end # f81865f + end #LPC + device pci 14.4 on end # 0x780F PCI :: PCI-b conflict with GPIO. + device pci 14.5 on end # 0x7809 USB OHCI + device pci 14.7 on end # 0x7806 SD Flash Controller + device pci 15.0 on end # 0x43A0 SB GPP Port 0 (Integrated Realtek GbE Controller) + device pci 15.1 on end # 0x43A1 SB GPP Port 1 (mPCIe slot J122) + device pci 15.2 on end # 0x43A2 SB GPP Port 2 (mPCIe slot J123) + device pci 15.3 off end # 0x43A3 SB GPP Port 3 + register "gpp_configuration" = "4" + device pci 16.0 on end # 0x7809 USB OHCI (when the xHCI device is disabled) + end #southbridge/amd/pi/hudson
+ chip northbridge/amd/pi/00630F01 device pci 18.0 on end # 0x141A HT Configuration device pci 18.1 on end # 0x141B Address Maps device pci 18.2 on end # 0x141C DRAM Configuration @@ -108,7 +108,7 @@ { { {0xA0, 0xA4}, {0xA2, 0xA6}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses }" + end
- end #chip northbridge/amd/pi/00630F01 # CPU side of HT root complex end #domain end #northbridge/amd/pi/00630F01/root_complex diff --git a/src/mainboard/amd/olivehillplus/devicetree.cb b/src/mainboard/amd/olivehillplus/devicetree.cb index ee0cd98..430b17b 100644 --- a/src/mainboard/amd/olivehillplus/devicetree.cb +++ b/src/mainboard/amd/olivehillplus/devicetree.cb @@ -21,52 +21,53 @@
device domain 0 on subsystemid 0x1022 0x1410 inherit - chip northbridge/amd/pi/00730F01 # CPU side of HT root complex
- chip northbridge/amd/pi/00730F01 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 0.2 off end # IOMMU - device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 - device pci 1.1 on end # Internal Multimedia - device pci 2.0 on end # PCIe Host Bridge - device pci 2.1 on end # x4 PCIe slot - device pci 2.2 on end # mPCIe slot - device pci 2.3 on end # Realtek NIC - device pci 2.4 on end # Edge Connector - device pci 2.5 on end # Edge Connector - device pci 8.0 on end # Platform Security Processor - end #chip northbridge/amd/pi/00730F01 + chip northbridge/amd/pi/00730F01 + device pci 0.0 on end # Root Complex + device pci 0.2 off end # IOMMU + device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 + device pci 1.1 on end # Internal Multimedia + device pci 2.0 on end # PCIe Host Bridge + device pci 2.1 on end # x4 PCIe slot + device pci 2.2 on end # mPCIe slot + device pci 2.3 on end # Realtek NIC + device pci 2.4 on end # Edge Connector + device pci 2.5 on end # Edge Connector + device pci 8.0 on end # Platform Security Processor + end #chip northbridge/amd/pi/00730F01
- chip southbridge/amd/pi/hudson # it is under NB/SB Link, but on the same pci bus - device pci 10.0 on end # XHCI HC0 - device pci 11.0 on end # SATA - device pci 12.0 on end # EHCI #0 - device pci 13.0 on end # EHCI #1 - device pci 14.0 on # SMBus - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - end # SMbus - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on end # LPC 0x439d - device pci 14.7 on end # SD - device pci 16.0 on end # EHCI #2 - end #chip southbridge/amd/pi/hudson + chip southbridge/amd/pi/hudson + device pci 10.0 on end # XHCI HC0 + device pci 11.0 on end # SATA + device pci 12.0 on end # EHCI #0 + device pci 13.0 on end # EHCI #1 + device pci 14.0 on # SMBus + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + end # SMbus + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on end # LPC 0x439d + device pci 14.7 on end # SD + device pci 16.0 on end # EHCI #2 + end #chip southbridge/amd/pi/hudson
+ chip northbridge/amd/pi/00730F01 device pci 18.0 on end device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end device pci 18.4 on end device pci 18.5 on end + register "spdAddrLookup" = " { { {0xA0, 0xA2} }, // socket 0, channel 0, slots 0 & 1 - 8-bit SPD addresses }" + end
- end #chip northbridge/amd/pi/00730F01 # CPU side of HT root complex end #domain end #northbridge/amd/pi/00730F01/root_complex diff --git a/src/mainboard/bap/ode_e21XX/devicetree.cb b/src/mainboard/bap/ode_e21XX/devicetree.cb index 04b0932..021ee90 100644 --- a/src/mainboard/bap/ode_e21XX/devicetree.cb +++ b/src/mainboard/bap/ode_e21XX/devicetree.cb @@ -21,96 +21,94 @@
device domain 0 on subsystemid 0x1022 0x1410 inherit - chip northbridge/amd/pi/00730F01 # CPU side of HT root complex
- chip northbridge/amd/pi/00730F01 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 0.2 off end # IOMMU - device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 - device pci 1.1 on end # Internal Multimedia - device pci 2.0 on end # PCIe Host Bridge - device pci 2.1 on end # x4 PCIe slot - device pci 2.2 on end # PCIe Q7 Realtek GBit LAN - device pci 2.3 on end # PCIe CB Realtek GBit LAN - device pci 2.4 on end # PCIe x2 BAP FPGA - device pci 8.0 on end # Platform Security Processor - end #chip northbridge/amd/pi/00730F01 + chip northbridge/amd/pi/00730F01 + device pci 0.0 on end # Root Complex + device pci 0.2 off end # IOMMU + device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 + device pci 1.1 on end # Internal Multimedia + device pci 2.0 on end # PCIe Host Bridge + device pci 2.1 on end # x4 PCIe slot + device pci 2.2 on end # PCIe Q7 Realtek GBit LAN + device pci 2.3 on end # PCIe CB Realtek GBit LAN + device pci 2.4 on end # PCIe x2 BAP FPGA + device pci 8.0 on end # Platform Security Processor + end #chip northbridge/amd/pi/00730F01
- chip southbridge/amd/pi/hudson # it is under NB/SB Link, but on the same pci bus - device pci 10.0 on end # XHCI HC0 - device pci 11.0 on end # SATA - device pci 12.0 on end # EHCI #0 - device pci 13.0 on end # EHCI #1 - device pci 14.0 on end # SMBus - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - chip superio/fintek/f81866d - register "hwm_amd_tsi_addr" = "0x98" # Set to AMD - register "hwm_amd_tsi_control" = "0x02" # Set to AMD - register "hwm_fan_select" = "0xC0" # Sets Fan2 to PWM - register "hwm_fan_mode" = "0xD5" # Sets FAN1-3 to Auto RPM mode - register "hwm_fan3_control" = "0x00" # Fan control 23kHz - register "hwm_fan2_temp_map_select" = "0x1E" # Fan control 23kHz - register "hwm_fan2_bound1" = "0x3C" # 60°C - register "hwm_fan2_bound2" = "0x32" # 50°C - register "hwm_fan2_bound3" = "0x28" # 40°C - register "hwm_fan2_bound4" = "0x1E" # 30°C - register "hwm_fan2_seg1_speed" = "0xFF" # 100% - register "hwm_fan2_seg2_speed" = "0xD9" # 85% - register "hwm_fan2_seg3_speed" = "0xB2" # 70% - register "hwm_fan2_seg4_speed" = "0x99" # 60% - register "hwm_fan2_seg5_speed" = "0x80" # 50% - register "hwm_temp_sens_type" = "0x04" # Sets temp sensor 1 type to to thermistor - device pnp 4e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 4e.3 off end # Parallel Port - device pnp 4e.4 on # Hardware Monitor - io 0x60 = 0x295 - irq 0x70 = 0 - end - device pnp 4e.5 off # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 4e.6 off end # GPIO - device pnp 4e.7 on end # WDT - device pnp 4e.a off end # PME - device pnp 4e.10 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.11 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 4e.12 off # COM3 - io 0x60 = 0x3e8 - irq 0x70 = 4 - end - device pnp 4e.13 off # COM4 - io 0x60 = 0x2e8 - irq 0x70 = 3 - end - device pnp 4e.14 off # COM5 - end - device pnp 4e.15 off # COM6 - end - end # f81866d - end #LPC - device pci 14.7 on end # SD - end #chip southbridge/amd/pi/hudson + chip southbridge/amd/pi/hudson + device pci 10.0 on end # XHCI HC0 + device pci 11.0 on end # SATA + device pci 12.0 on end # EHCI #0 + device pci 13.0 on end # EHCI #1 + device pci 14.0 on end # SMBus + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/fintek/f81866d + register "hwm_amd_tsi_addr" = "0x98" # Set to AMD + register "hwm_amd_tsi_control" = "0x02" # Set to AMD + register "hwm_fan_select" = "0xC0" # Sets Fan2 to PWM + register "hwm_fan_mode" = "0xD5" # Sets FAN1-3 to Auto RPM mode + register "hwm_fan3_control" = "0x00" # Fan control 23kHz + register "hwm_fan2_temp_map_select" = "0x1E" # Fan control 23kHz + register "hwm_fan2_bound1" = "0x3C" # 60°C + register "hwm_fan2_bound2" = "0x32" # 50°C + register "hwm_fan2_bound3" = "0x28" # 40°C + register "hwm_fan2_bound4" = "0x1E" # 30°C + register "hwm_fan2_seg1_speed" = "0xFF" # 100% + register "hwm_fan2_seg2_speed" = "0xD9" # 85% + register "hwm_fan2_seg3_speed" = "0xB2" # 70% + register "hwm_fan2_seg4_speed" = "0x99" # 60% + register "hwm_fan2_seg5_speed" = "0x80" # 50% + register "hwm_temp_sens_type" = "0x04" # Sets temp sensor 1 type to to thermistor + device pnp 4e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 4e.3 off end # Parallel Port + device pnp 4e.4 on # Hardware Monitor + io 0x60 = 0x295 + irq 0x70 = 0 + end + device pnp 4e.5 off # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 4e.6 off end # GPIO + device pnp 4e.7 on end # WDT + device pnp 4e.a off end # PME + device pnp 4e.10 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.11 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 4e.12 off # COM3 + io 0x60 = 0x3e8 + irq 0x70 = 4 + end + device pnp 4e.13 off # COM4 + io 0x60 = 0x2e8 + irq 0x70 = 3 + end + device pnp 4e.14 off # COM5 + end + device pnp 4e.15 off # COM6 + end + end # f81866d + end #LPC + device pci 14.7 on end # SD + end #chip southbridge/amd/pi/hudson
- device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end
- end #chip northbridge/amd/pi/00730F01 # CPU side of HT root complex end #domain end #northbridge/amd/pi/00730F01/root_complex diff --git a/src/mainboard/pcengines/apu2/variants/apu2/devicetree.cb b/src/mainboard/pcengines/apu2/variants/apu2/devicetree.cb index 2905e2c..6728228 100644 --- a/src/mainboard/pcengines/apu2/variants/apu2/devicetree.cb +++ b/src/mainboard/pcengines/apu2/variants/apu2/devicetree.cb @@ -21,74 +21,72 @@
device domain 0 on subsystemid 0x1022 0x1410 inherit - chip northbridge/amd/pi/00730F01 # CPU side of HT root complex
- chip northbridge/amd/pi/00730F01 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 0.2 on end # IOMMU - device pci 1.0 off end # Internal Graphics P2P bridge 0x9804 - device pci 1.1 off end # Internal Multimedia - device pci 2.0 on end # PCIe Host Bridge - device pci 2.1 on end # mPCIe slot 2 (on GFX lane) - device pci 2.2 on end # LAN3 - device pci 2.3 on end # LAN2 - device pci 2.4 on end # LAN1 - device pci 2.5 on end # mPCIe slot 1 - device pci 8.0 on end # Platform Security Processor - end #chip northbridge/amd/pi/00730F01 + chip northbridge/amd/pi/00730F01 + device pci 0.0 on end # Root Complex + device pci 0.2 on end # IOMMU + device pci 1.0 off end # Internal Graphics P2P bridge 0x9804 + device pci 1.1 off end # Internal Multimedia + device pci 2.0 on end # PCIe Host Bridge + device pci 2.1 on end # mPCIe slot 2 (on GFX lane) + device pci 2.2 on end # LAN3 + device pci 2.3 on end # LAN2 + device pci 2.4 on end # LAN1 + device pci 2.5 on end # mPCIe slot 1 + device pci 8.0 on end # Platform Security Processor + end #chip northbridge/amd/pi/00730F01
- chip southbridge/amd/pi/hudson # it is under NB/SB Link, but on the same pci bus - device pci 10.0 on end # XHCI HC0 muxed with EHCI 2 - device pci 11.0 on end # SATA - device pci 12.0 off end # USB EHCI0 usb[0:3] not connected - device pci 13.0 on end # USB EHCI1 usb[4:7] - device pci 14.0 on end # SM - device pci 14.3 on # LPC 0x439d - chip superio/nuvoton/nct5104d # SIO NCT5104D - register "irq_trigger_type" = "0" - device pnp 2e.0 off end - device pnp 2e.2 on - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.10 on - # UART C is conditionally turned on - io 0x60 = 0x3e8 - irq 0x70 = 4 - end - device pnp 2e.11 on - # UART D is conditionally turned on - io 0x60 = 0x2e8 - irq 0x70 = 3 - end - device pnp 2e.8 off end - device pnp 2e.f off end - # GPIO0 and GPIO1 are conditionally turned on - device pnp 2e.007 on end - device pnp 2e.107 on end - device pnp 2e.607 off end - device pnp 2e.e off end - end # SIO NCT5104D - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end # LPC TPM - end # LPC 0x439d + chip southbridge/amd/pi/hudson + device pci 10.0 on end # XHCI HC0 muxed with EHCI 2 + device pci 11.0 on end # SATA + device pci 12.0 off end # USB EHCI0 usb[0:3] not connected + device pci 13.0 on end # USB EHCI1 usb[4:7] + device pci 14.0 on end # SM + device pci 14.3 on # LPC 0x439d + chip superio/nuvoton/nct5104d # SIO NCT5104D + register "irq_trigger_type" = "0" + device pnp 2e.0 off end + device pnp 2e.2 on + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.10 on + # UART C is conditionally turned on + io 0x60 = 0x3e8 + irq 0x70 = 4 + end + device pnp 2e.11 on + # UART D is conditionally turned on + io 0x60 = 0x2e8 + irq 0x70 = 3 + end + device pnp 2e.8 off end + device pnp 2e.f off end + # GPIO0 and GPIO1 are conditionally turned on + device pnp 2e.007 on end + device pnp 2e.107 on end + device pnp 2e.607 off end + device pnp 2e.e off end + end # SIO NCT5104D + chip drivers/pc80/tpm + device pnp 0c31.0 on end + end # LPC TPM + end # LPC 0x439d
- device pci 14.7 on end # SD - device pci 16.0 on end # USB EHCI2 usb[8:7] - muxed with XHCI - end #chip southbridge/amd/pi/hudson + device pci 14.7 on end # SD + device pci 16.0 on end # USB EHCI2 usb[8:7] - muxed with XHCI + end #chip southbridge/amd/pi/hudson
- device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end
- end #chip northbridge/amd/pi/00730F01 # CPU side of HT root complex end #domain end #northbridge/amd/pi/00730F01/root_complex diff --git a/src/mainboard/pcengines/apu2/variants/apu3/devicetree.cb b/src/mainboard/pcengines/apu2/variants/apu3/devicetree.cb index 4da123e..0c0c21e 100644 --- a/src/mainboard/pcengines/apu2/variants/apu3/devicetree.cb +++ b/src/mainboard/pcengines/apu2/variants/apu3/devicetree.cb @@ -21,71 +21,69 @@
device domain 0 on subsystemid 0x1022 0x1410 inherit - chip northbridge/amd/pi/00730F01 # CPU side of HT root complex
- chip northbridge/amd/pi/00730F01 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 0.2 on end # IOMMU - device pci 1.0 off end # Internal Graphics P2P bridge 0x9804 - device pci 1.1 off end # Internal Multimedia - device pci 2.0 on end # PCIe Host Bridge - device pci 2.1 on end # mPCIe slot 2 (on GFX lane) - device pci 2.2 on end # LAN3 - device pci 2.3 on end # LAN2 - device pci 2.4 on end # LAN1 - device pci 2.5 on end # mPCIe slot 1 - device pci 8.0 on end # Platform Security Processor - end #chip northbridge/amd/pi/00730F01 + chip northbridge/amd/pi/00730F01 + device pci 0.0 on end # Root Complex + device pci 0.2 on end # IOMMU + device pci 1.0 off end # Internal Graphics P2P bridge 0x9804 + device pci 1.1 off end # Internal Multimedia + device pci 2.0 on end # PCIe Host Bridge + device pci 2.1 on end # mPCIe slot 2 (on GFX lane) + device pci 2.2 on end # LAN3 + device pci 2.3 on end # LAN2 + device pci 2.4 on end # LAN1 + device pci 2.5 on end # mPCIe slot 1 + device pci 8.0 on end # Platform Security Processor + end #chip northbridge/amd/pi/00730F01
- chip southbridge/amd/pi/hudson # it is under NB/SB Link, but on the same pci bus - device pci 10.0 on end # XHCI HC0 muxed with EHCI 2 - device pci 11.0 on end # SATA - device pci 12.0 on end # USB EHCI0 usb[0:3] is connected - device pci 13.0 on end # USB EHCI1 usb[4:7] - device pci 14.0 on end # SM - device pci 14.3 on # LPC 0x439d - chip superio/nuvoton/nct5104d # SIO NCT5104D - register "irq_trigger_type" = "0" - device pnp 2e.0 off end - device pnp 2e.2 on - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.10 on - # UART C is conditionally turned on - io 0x60 = 0x3e8 - irq 0x70 = 4 - end - device pnp 2e.11 on - # UART D is conditionally turned on - io 0x60 = 0x2e8 - irq 0x70 = 3 - end - device pnp 2e.8 off end - device pnp 2e.f off end - # GPIO0 and GPIO1 are conditionally turned on - device pnp 2e.007 on end - device pnp 2e.107 on end - device pnp 2e.607 off end - device pnp 2e.e off end - end # SIO NCT5104D - end # LPC 0x439d + chip southbridge/amd/pi/hudson # it is under NB/SB Link, but on the same pci bus + device pci 10.0 on end # XHCI HC0 muxed with EHCI 2 + device pci 11.0 on end # SATA + device pci 12.0 on end # USB EHCI0 usb[0:3] is connected + device pci 13.0 on end # USB EHCI1 usb[4:7] + device pci 14.0 on end # SM + device pci 14.3 on # LPC 0x439d + chip superio/nuvoton/nct5104d # SIO NCT5104D + register "irq_trigger_type" = "0" + device pnp 2e.0 off end + device pnp 2e.2 on + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.10 on + # UART C is conditionally turned on + io 0x60 = 0x3e8 + irq 0x70 = 4 + end + device pnp 2e.11 on + # UART D is conditionally turned on + io 0x60 = 0x2e8 + irq 0x70 = 3 + end + device pnp 2e.8 off end + device pnp 2e.f off end + # GPIO0 and GPIO1 are conditionally turned on + device pnp 2e.007 on end + device pnp 2e.107 on end + device pnp 2e.607 off end + device pnp 2e.e off end + end # SIO NCT5104D + end # LPC 0x439d
- device pci 14.7 on end # SD - device pci 16.0 on end # USB EHCI2 usb[8:7] - muxed with XHCI - end #chip southbridge/amd/pi/hudson + device pci 14.7 on end # SD + device pci 16.0 on end # USB EHCI2 usb[8:7] - muxed with XHCI + end #chip southbridge/amd/pi/hudson
- device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end
- end #chip northbridge/amd/pi/00730F01 # CPU side of HT root complex end #domain end #northbridge/amd/pi/00730F01/root_complex diff --git a/src/mainboard/pcengines/apu2/variants/apu4/devicetree.cb b/src/mainboard/pcengines/apu2/variants/apu4/devicetree.cb index b95afab..c93c04f 100644 --- a/src/mainboard/pcengines/apu2/variants/apu4/devicetree.cb +++ b/src/mainboard/pcengines/apu2/variants/apu4/devicetree.cb @@ -21,71 +21,69 @@
device domain 0 on subsystemid 0x1022 0x1410 inherit - chip northbridge/amd/pi/00730F01 # CPU side of HT root complex
- chip northbridge/amd/pi/00730F01 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 0.2 on end # IOMMU - device pci 1.0 off end # Internal Graphics P2P bridge 0x9804 - device pci 1.1 off end # Internal Multimedia - device pci 2.0 on end # PCIe Host Bridge - device pci 2.1 on end # LAN1 - device pci 2.2 on end # LAN2 - device pci 2.3 on end # LAN3 - device pci 2.4 on end # LAN4 - device pci 2.5 on end # mPCIe slot 1 - device pci 8.0 on end # Platform Security Processor - end #chip northbridge/amd/pi/00730F01 + chip northbridge/amd/pi/00730F01 + device pci 0.0 on end # Root Complex + device pci 0.2 on end # IOMMU + device pci 1.0 off end # Internal Graphics P2P bridge 0x9804 + device pci 1.1 off end # Internal Multimedia + device pci 2.0 on end # PCIe Host Bridge + device pci 2.1 on end # LAN1 + device pci 2.2 on end # LAN2 + device pci 2.3 on end # LAN3 + device pci 2.4 on end # LAN4 + device pci 2.5 on end # mPCIe slot 1 + device pci 8.0 on end # Platform Security Processor + end #chip northbridge/amd/pi/00730F01
- chip southbridge/amd/pi/hudson # it is under NB/SB Link, but on the same pci bus - device pci 10.0 on end # XHCI HC0 muxed with EHCI 2 - device pci 11.0 on end # SATA - device pci 12.0 on end # USB EHCI0 usb[0:3] is connected - device pci 13.0 on end # USB EHCI1 usb[4:7] - device pci 14.0 on end # SM - device pci 14.3 on # LPC 0x439d - chip superio/nuvoton/nct5104d # SIO NCT5104D - register "irq_trigger_type" = "0" - device pnp 2e.0 off end - device pnp 2e.2 on - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.10 on - # UART C is conditionally turned on - io 0x60 = 0x3e8 - irq 0x70 = 4 - end - device pnp 2e.11 on - # UART D is conditionally turned on - io 0x60 = 0x2e8 - irq 0x70 = 3 - end - device pnp 2e.8 off end - device pnp 2e.f off end - # GPIO0 and GPIO1 are conditionally turned on - device pnp 2e.007 on end - device pnp 2e.107 on end - device pnp 2e.607 off end - device pnp 2e.e off end - end # SIO NCT5104D - end # LPC 0x439d + chip southbridge/amd/pi/hudson + device pci 10.0 on end # XHCI HC0 muxed with EHCI 2 + device pci 11.0 on end # SATA + device pci 12.0 on end # USB EHCI0 usb[0:3] is connected + device pci 13.0 on end # USB EHCI1 usb[4:7] + device pci 14.0 on end # SM + device pci 14.3 on # LPC 0x439d + chip superio/nuvoton/nct5104d # SIO NCT5104D + register "irq_trigger_type" = "0" + device pnp 2e.0 off end + device pnp 2e.2 on + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.10 on + # UART C is conditionally turned on + io 0x60 = 0x3e8 + irq 0x70 = 4 + end + device pnp 2e.11 on + # UART D is conditionally turned on + io 0x60 = 0x2e8 + irq 0x70 = 3 + end + device pnp 2e.8 off end + device pnp 2e.f off end + # GPIO0 and GPIO1 are conditionally turned on + device pnp 2e.007 on end + device pnp 2e.107 on end + device pnp 2e.607 off end + device pnp 2e.e off end + end # SIO NCT5104D + end # LPC 0x439d
- device pci 14.7 on end # SD - device pci 16.0 on end # USB EHCI2 usb[8:7] - muxed with XHCI - end #chip southbridge/amd/pi/hudson + device pci 14.7 on end # SD + device pci 16.0 on end # USB EHCI2 usb[8:7] - muxed with XHCI + end #chip southbridge/amd/pi/hudson
- device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end
- end #chip northbridge/amd/pi/00730F01 # CPU side of HT root complex end #domain end #northbridge/amd/pi/00730F01/root_complex diff --git a/src/mainboard/pcengines/apu2/variants/apu5/devicetree.cb b/src/mainboard/pcengines/apu2/variants/apu5/devicetree.cb index b5700f8..b6b22cf 100644 --- a/src/mainboard/pcengines/apu2/variants/apu5/devicetree.cb +++ b/src/mainboard/pcengines/apu2/variants/apu5/devicetree.cb @@ -21,73 +21,71 @@
device domain 0 on subsystemid 0x1022 0x1410 inherit - chip northbridge/amd/pi/00730F01 # CPU side of HT root complex
- chip northbridge/amd/pi/00730F01 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 0.2 on end # IOMMU - device pci 1.0 off end # Internal Graphics P2P bridge 0x9804 - device pci 1.1 off end # Internal Multimedia - device pci 2.0 on end # PCIe Host Bridge - device pci 2.1 on end # mPCIe slot 2 (on GFX lane) - device pci 2.2 on end # LAN3 - device pci 2.3 on end # LAN2 - device pci 2.4 on end # LAN1 - device pci 2.5 on end # mPCIe slot 1 - device pci 8.0 on end # Platform Security Processor - end #chip northbridge/amd/pi/00730F01 + chip northbridge/amd/pi/00730F01 # PCI side of HT root complex + device pci 0.0 on end # Root Complex + device pci 0.2 on end # IOMMU + device pci 1.0 off end # Internal Graphics P2P bridge 0x9804 + device pci 1.1 off end # Internal Multimedia + device pci 2.0 on end # PCIe Host Bridge + device pci 2.1 on end # mPCIe slot 2 (on GFX lane) + device pci 2.2 on end # LAN3 + device pci 2.3 on end # LAN2 + device pci 2.4 on end # LAN1 + device pci 2.5 on end # mPCIe slot 1 + device pci 8.0 on end # Platform Security Processor + end #chip northbridge/amd/pi/00730F01
- chip southbridge/amd/pi/hudson # it is under NB/SB Link, but on the same pci bus - device pci 10.0 on end # XHCI HC0 muxed with EHCI 2 - device pci 11.0 on end # SATA - device pci 12.0 on end # USB EHCI0 usb[0:3] is connected - device pci 13.0 on end # USB EHCI1 usb[4:7] - device pci 14.0 on end # SM - device pci 14.3 on # LPC 0x439d - chip superio/nuvoton/nct5104d # SIO NCT5104D - register "irq_trigger_type" = "0" - device pnp 2e.0 off end - device pnp 2e.2 on - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.10 on - # UART C is conditionally turned on - io 0x60 = 0x3e8 - irq 0x70 = 4 - end - device pnp 2e.11 on - # UART D is conditionally turned on - io 0x60 = 0x2e8 - irq 0x70 = 3 - end - device pnp 2e.8 off end - device pnp 2e.f off end - device pnp 2e.007 off end - device pnp 2e.107 off end - device pnp 2e.607 off end - device pnp 2e.e off end - end # SIO NCT5104D - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end # LPC TPM - end # LPC 0x439d + chip southbridge/amd/pi/hudson # it is under NB/SB Link, but on the same pci bus + device pci 10.0 on end # XHCI HC0 muxed with EHCI 2 + device pci 11.0 on end # SATA + device pci 12.0 on end # USB EHCI0 usb[0:3] is connected + device pci 13.0 on end # USB EHCI1 usb[4:7] + device pci 14.0 on end # SM + device pci 14.3 on # LPC 0x439d + chip superio/nuvoton/nct5104d # SIO NCT5104D + register "irq_trigger_type" = "0" + device pnp 2e.0 off end + device pnp 2e.2 on + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.10 on + # UART C is conditionally turned on + io 0x60 = 0x3e8 + irq 0x70 = 4 + end + device pnp 2e.11 on + # UART D is conditionally turned on + io 0x60 = 0x2e8 + irq 0x70 = 3 + end + device pnp 2e.8 off end + device pnp 2e.f off end + device pnp 2e.007 off end + device pnp 2e.107 off end + device pnp 2e.607 off end + device pnp 2e.e off end + end # SIO NCT5104D + chip drivers/pc80/tpm + device pnp 0c31.0 on end + end # LPC TPM + end # LPC 0x439d
- device pci 14.7 off end # SD - device pci 16.0 on end # USB EHCI2 usb[8:7] - muxed with XHCI - end #chip southbridge/amd/pi/hudson + device pci 14.7 off end # SD + device pci 16.0 on end # USB EHCI2 usb[8:7] - muxed with XHCI + end #chip southbridge/amd/pi/hudson
- device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end
- end #chip northbridge/amd/pi/00730F01 # CPU side of HT root complex end #domain end #northbridge/amd/pi/00730F01/root_complex
Paul Menzel has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/31271 )
Change subject: binaryPI: Drop nested northbridge in devicetree ......................................................................
Patch Set 1: Code-Review+1
Michał Żygowski has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/31271 )
Change subject: binaryPI: Drop nested northbridge in devicetree ......................................................................
Patch Set 1: Code-Review+1
Kyösti Mälkki has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/31271 )
Change subject: binaryPI: Drop nested northbridge in devicetree ......................................................................
Patch Set 1:
This nesting was already removed for soc/stoney and AGESA boards.
Marshall Dawson has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/31271 )
Change subject: binaryPI: Drop nested northbridge in devicetree ......................................................................
Patch Set 1:
This nesting was already removed for soc/stoney and AGESA boards.
Kyosti, you have an apu2 board, or some other way to test this, right? Marc had originally changed that whole chip/domain/northbridge nesting on stoneyridge to match the Intel systems more closely. I don't recall if he ran into any dependencies in the process.
Michał Żygowski has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/31271 )
Change subject: binaryPI: Drop nested northbridge in devicetree ......................................................................
Patch Set 1:
Patch Set 1:
This nesting was already removed for soc/stoney and AGESA boards.
Kyosti, you have an apu2 board, or some other way to test this, right? Marc had originally changed that whole chip/domain/northbridge nesting on stoneyridge to match the Intel systems more closely. I don't recall if he ran into any dependencies in the process.
I have already tested the patch on apu2.
Kyösti Mälkki has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/31271 )
Change subject: binaryPI: Drop nested northbridge in devicetree ......................................................................
Patch Set 1:
Patch Set 1:
Patch Set 1:
This nesting was already removed for soc/stoney and AGESA boards.
Kyosti, you have an apu2 board, or some other way to test this, right? Marc had originally changed that whole chip/domain/northbridge nesting on stoneyridge to match the Intel systems more closely. I don't recall if he ran into any dependencies in the process.
I have already tested the patch on apu2.
You shouldn't be shy about +2 reviews. I always have a bunch of stuff locally applied and sometimes just forget to run tests on a single patch and clean master.
Michał Żygowski has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/31271 )
Change subject: binaryPI: Drop nested northbridge in devicetree ......................................................................
Patch Set 1:
Patch Set 1:
Patch Set 1:
Patch Set 1:
This nesting was already removed for soc/stoney and AGESA boards.
Kyosti, you have an apu2 board, or some other way to test this, right? Marc had originally changed that whole chip/domain/northbridge nesting on stoneyridge to match the Intel systems more closely. I don't recall if he ran into any dependencies in the process.
I have already tested the patch on apu2.
You shouldn't be shy about +2 reviews. I always have a bunch of stuff locally applied and sometimes just forget to run tests on a single patch and clean master.
I'm not shy :) I just don't have rights to give +2. My max review capability currently available is +1.
Kyösti Mälkki has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/31271 )
Change subject: binaryPI: Drop nested northbridge in devicetree ......................................................................
Patch Set 1:
You shouldn't be shy about +2 reviews. I always have a bunch of stuff locally applied and sometimes just forget to run tests on a single patch and clean master.
I'm not shy :) I just don't have rights to give +2. My max review capability currently available is +1.
Ah.. try now. Everyone gets into Reviewers (-1/+2) on request. This does not permit submitting changes or blocking (-2). There's currently about 20-30 people in Developers group with those permissions.
Michał Żygowski has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/31271 )
Change subject: binaryPI: Drop nested northbridge in devicetree ......................................................................
Patch Set 1: Code-Review+2
Kyösti Mälkki has submitted this change and it was merged. ( https://review.coreboot.org/c/coreboot/+/31271 )
Change subject: binaryPI: Drop nested northbridge in devicetree ......................................................................
binaryPI: Drop nested northbridge in devicetree
SPD data needs to remain within same chip -block with device 0:18.2.
Change-Id: Ic12481b637ee5f5119faec3239b477f613e4e511 Signed-off-by: Kyösti Mälkki kyosti.malkki@gmail.com Reviewed-on: https://review.coreboot.org/c/31271 Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: Paul Menzel paulepanter@users.sourceforge.net Reviewed-by: Michał Żygowski michal.zygowski@3mdeb.com --- M src/mainboard/amd/bettong/devicetree.cb M src/mainboard/amd/db-ft3b-lc/devicetree.cb M src/mainboard/amd/lamar/devicetree.cb M src/mainboard/amd/olivehillplus/devicetree.cb M src/mainboard/bap/ode_e21XX/devicetree.cb M src/mainboard/pcengines/apu2/variants/apu2/devicetree.cb M src/mainboard/pcengines/apu2/variants/apu3/devicetree.cb M src/mainboard/pcengines/apu2/variants/apu4/devicetree.cb M src/mainboard/pcengines/apu2/variants/apu5/devicetree.cb 9 files changed, 491 insertions(+), 501 deletions(-)
Approvals: build bot (Jenkins): Verified Paul Menzel: Looks good to me, but someone else must approve Michał Żygowski: Looks good to me, approved
diff --git a/src/mainboard/amd/bettong/devicetree.cb b/src/mainboard/amd/bettong/devicetree.cb index a259e92..84aaf41 100644 --- a/src/mainboard/amd/bettong/devicetree.cb +++ b/src/mainboard/amd/bettong/devicetree.cb @@ -21,53 +21,54 @@
device domain 0 on subsystemid 0x1022 0x1410 inherit - chip northbridge/amd/pi/00660F01 # CPU side of HT root complex
- chip northbridge/amd/pi/00660F01 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 - device pci 1.1 on end # Internal Multimedia - device pci 2.0 on end # PCIe Host Bridge - device pci 2.1 on end # x4 PCIe slot - device pci 2.2 on end # mPCIe slot - device pci 2.3 on end # Realtek NIC - device pci 2.4 on end # Edge Connector - device pci 2.5 on end # Edge Connector - device pci 3.0 on end # Edge Connector - device pci 3.1 on end # Edge Connector - end #chip northbridge/amd/pi/00660F01 + chip northbridge/amd/pi/00660F01 + device pci 0.0 on end # Root Complex + device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 + device pci 1.1 on end # Internal Multimedia + device pci 2.0 on end # PCIe Host Bridge + device pci 2.1 on end # x4 PCIe slot + device pci 2.2 on end # mPCIe slot + device pci 2.3 on end # Realtek NIC + device pci 2.4 on end # Edge Connector + device pci 2.5 on end # Edge Connector + device pci 3.0 on end # Edge Connector + device pci 3.1 on end # Edge Connector + end #chip northbridge/amd/pi/00660F01
- chip southbridge/amd/pi/hudson # it is under NB/SB Link, but on the same pci bus - device pci 9.0 on end # HDA - device pci 9.2 on end # HDA - device pci 10.0 on end # USB - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - end # SM - #device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on end # LPC 0x439d - device pci 14.7 on end # SD - end #chip southbridge/amd/pi/hudson + chip southbridge/amd/pi/hudson + device pci 9.0 on end # HDA + device pci 9.2 on end # HDA + device pci 10.0 on end # USB + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + end # SM + #device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on end # LPC 0x439d + device pci 14.7 on end # SD + end #chip southbridge/amd/pi/hudson
+ chip northbridge/amd/pi/00660F01 device pci 18.0 on end device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end device pci 18.4 on end device pci 18.5 on end + register "spdAddrLookup" = " { { {0xA0, 0xA4}, {0xA2, 0xA6}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses }" + end
- end #chip northbridge/amd/pi/00660F01 # CPU side of HT root complex end #domain end #northbridge/amd/pi/00660F01/root_complex diff --git a/src/mainboard/amd/db-ft3b-lc/devicetree.cb b/src/mainboard/amd/db-ft3b-lc/devicetree.cb index 1faebf4..dfbe3e2 100644 --- a/src/mainboard/amd/db-ft3b-lc/devicetree.cb +++ b/src/mainboard/amd/db-ft3b-lc/devicetree.cb @@ -22,42 +22,40 @@
device domain 0 on subsystemid 0x1022 0x1410 inherit - chip northbridge/amd/pi/00730F01 # CPU side of HT root complex
- chip northbridge/amd/pi/00730F01 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 0.2 off end # IOMMU - device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 - device pci 1.1 on end # Internal Multimedia - device pci 2.0 on end # PCIe Host Bridge - device pci 2.1 on end # x4 PCIe slot - device pci 2.2 on end # mPCIe slot - device pci 2.3 on end # Realtek NIC - device pci 2.4 off end # Edge Connector - device pci 2.5 off end # Edge Connector - device pci 8.0 off end # Platform Security Processor - end #chip northbridge/amd/pi/00730F01 + chip northbridge/amd/pi/00730F01 + device pci 0.0 on end # Root Complex + device pci 0.2 off end # IOMMU + device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 + device pci 1.1 on end # Internal Multimedia + device pci 2.0 on end # PCIe Host Bridge + device pci 2.1 on end # x4 PCIe slot + device pci 2.2 on end # mPCIe slot + device pci 2.3 on end # Realtek NIC + device pci 2.4 off end # Edge Connector + device pci 2.5 off end # Edge Connector + device pci 8.0 off end # Platform Security Processor + end #chip northbridge/amd/pi/00730F01
- chip southbridge/amd/pi/hudson # it is under NB/SB Link, but on the same pci bus - device pci 10.0 on end # XHCI HC0 - device pci 11.0 on end # SATA - device pci 12.0 on end # EHCI #0 - device pci 13.0 on end # EHCI #1 - device pci 14.0 on end # SMBus - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on end # LPC 0x439d - device pci 14.7 on end # SD - device pci 16.0 on end # EHCI #2 - register "sd_mode" = "3" - end #chip southbridge/amd/pi/hudson + chip southbridge/amd/pi/hudson + device pci 10.0 on end # XHCI HC0 + device pci 11.0 on end # SATA + device pci 12.0 on end # EHCI #0 + device pci 13.0 on end # EHCI #1 + device pci 14.0 on end # SMBus + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on end # LPC 0x439d + device pci 14.7 on end # SD + device pci 16.0 on end # EHCI #2 + register "sd_mode" = "3" + end #chip southbridge/amd/pi/hudson
- device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end
- end #chip northbridge/amd/pi/00730F01 # CPU side of HT root complex end #domain end #northbridge/amd/pi/00730F01/root_complex diff --git a/src/mainboard/amd/lamar/devicetree.cb b/src/mainboard/amd/lamar/devicetree.cb index 593f95b..d7f3f05 100644 --- a/src/mainboard/amd/lamar/devicetree.cb +++ b/src/mainboard/amd/lamar/devicetree.cb @@ -22,81 +22,81 @@
device domain 0 on subsystemid 0x1022 0x1410 inherit - chip northbridge/amd/pi/00630F01 # CPU side of HT root complex
- chip northbridge/amd/pi/00630F01 # PCI side of HT root complex - device pci 0.0 on end # 0x1422 Root Complex - device pci 0.2 off end # 0x1423 IOMMU - device pci 1.0 on end # 0x13XX Internal Graphics - device pci 1.1 on end # 0x1308 DisplayPort/HDMI Audio - device pci 2.0 on end # 0x1424 GFX PCIe Host Bridge - device pci 2.1 on end # 0x1425 P2P Bridge for GFX PCIe Port 0 (PCIe x16 slot J119) - device pci 2.2 off end # 0x1425 P2P Bridge for GFX PCIe Port 1 - device pci 3.0 on end # 0x1424 GPP PCIe Host Bridge - device pci 3.1 on end # 0x1426 P2P Bridge for GPP PCIe Port 0 (PCIe x4 slot J118) - device pci 3.2 on end # 0x1426 P2P Bridge for GPP PCIe Port 1 (PCIe x4 slot J120) - device pci 3.3 off end # 0x1426 P2P Bridge for GPP PCIe Port 2 - device pci 3.4 off end # 0x1426 P2P Bridge for GPP PCIe Port 3 - device pci 3.5 off end # 0x1426 P2P Bridge for GPP PCIe Port 4 - device pci 4.0 on end # 0x1424 UMI PCIe Host Bridge + chip northbridge/amd/pi/00630F01 + device pci 0.0 on end # 0x1422 Root Complex + device pci 0.2 off end # 0x1423 IOMMU + device pci 1.0 on end # 0x13XX Internal Graphics + device pci 1.1 on end # 0x1308 DisplayPort/HDMI Audio + device pci 2.0 on end # 0x1424 GFX PCIe Host Bridge + device pci 2.1 on end # 0x1425 P2P Bridge for GFX PCIe Port 0 (PCIe x16 slot J119) + device pci 2.2 off end # 0x1425 P2P Bridge for GFX PCIe Port 1 + device pci 3.0 on end # 0x1424 GPP PCIe Host Bridge + device pci 3.1 on end # 0x1426 P2P Bridge for GPP PCIe Port 0 (PCIe x4 slot J118) + device pci 3.2 on end # 0x1426 P2P Bridge for GPP PCIe Port 1 (PCIe x4 slot J120) + device pci 3.3 off end # 0x1426 P2P Bridge for GPP PCIe Port 2 + device pci 3.4 off end # 0x1426 P2P Bridge for GPP PCIe Port 3 + device pci 3.5 off end # 0x1426 P2P Bridge for GPP PCIe Port 4 + device pci 4.0 on end # 0x1424 UMI PCIe Host Bridge # device pci 4.1 on end # 0x1426 P2P bridge for UMI link # device pci 4.2 off end # 0x1426 Virtual P2P bridge for SB PCIe Port 3 # device pci 4.3 off end # 0x1426 Virtual P2P bridge for SB PCIe Port 2 # device pci 4.4 off end # 0x1426 Virtual P2P bridge for SB PCIe Port 1 # device pci 4.5 off end # 0x1426 Virtual P2P bridge for SB PCIe Port 0 - end #chip northbridge/amd/pi/00630F01 + end #chip northbridge/amd/pi/00630F01
- chip southbridge/amd/pi/hudson - device pci 10.0 on end # 0x7814 XHCI HC0 - device pci 10.1 on end # 0x7814 XHCI HC1 - device pci 11.0 on end # 0x7800-0x7805 SATA (device ID depends on mode) - device pci 12.0 on end # 0x7807 USB OHCI - device pci 12.2 on end # 0x7808 USB EHCI - device pci 13.0 on end # 0x7807 USB OHCI - device pci 13.2 on end # 0x7808 USB EHCI - device pci 14.0 on # 0x780B SMBus - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end + chip southbridge/amd/pi/hudson + device pci 10.0 on end # 0x7814 XHCI HC0 + device pci 10.1 on end # 0x7814 XHCI HC1 + device pci 11.0 on end # 0x7800-0x7805 SATA (device ID depends on mode) + device pci 12.0 on end # 0x7807 USB OHCI + device pci 12.2 on end # 0x7808 USB EHCI + device pci 13.0 on end # 0x7807 USB OHCI + device pci 13.2 on end # 0x7808 USB EHCI + device pci 14.0 on # 0x780B SMBus + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + end # SM + device pci 14.1 on end # 0x780C IDE + device pci 14.2 on end # 0x780D HDA + device pci 14.3 on # 0x780E LPC + chip superio/fintek/f81216h + register "conf_key_mode" = "0x77" + device pnp 4e.0 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end + device pnp 4e.1 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - end # SM - device pci 14.1 on end # 0x780C IDE - device pci 14.2 on end # 0x780D HDA - device pci 14.3 on # 0x780E LPC - chip superio/fintek/f81216h - register "conf_key_mode" = "0x77" - device pnp 4e.0 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.1 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 4e.2 off end # COM3 - device pnp 4e.3 off end # COM4 - device pnp 4e.8 off end # WDT - end # f81865f - end #LPC - device pci 14.4 on end # 0x780F PCI :: PCI-b conflict with GPIO. - device pci 14.5 on end # 0x7809 USB OHCI - device pci 14.7 on end # 0x7806 SD Flash Controller - device pci 15.0 on end # 0x43A0 SB GPP Port 0 (Integrated Realtek GbE Controller) - device pci 15.1 on end # 0x43A1 SB GPP Port 1 (mPCIe slot J122) - device pci 15.2 on end # 0x43A2 SB GPP Port 2 (mPCIe slot J123) - device pci 15.3 off end # 0x43A3 SB GPP Port 3 - register "gpp_configuration" = "4" - device pci 16.0 on end # 0x7809 USB OHCI (when the xHCI device is disabled) - end #southbridge/amd/pi/hudson + device pnp 4e.2 off end # COM3 + device pnp 4e.3 off end # COM4 + device pnp 4e.8 off end # WDT + end # f81865f + end #LPC + device pci 14.4 on end # 0x780F PCI :: PCI-b conflict with GPIO. + device pci 14.5 on end # 0x7809 USB OHCI + device pci 14.7 on end # 0x7806 SD Flash Controller + device pci 15.0 on end # 0x43A0 SB GPP Port 0 (Integrated Realtek GbE Controller) + device pci 15.1 on end # 0x43A1 SB GPP Port 1 (mPCIe slot J122) + device pci 15.2 on end # 0x43A2 SB GPP Port 2 (mPCIe slot J123) + device pci 15.3 off end # 0x43A3 SB GPP Port 3 + register "gpp_configuration" = "4" + device pci 16.0 on end # 0x7809 USB OHCI (when the xHCI device is disabled) + end #southbridge/amd/pi/hudson
+ chip northbridge/amd/pi/00630F01 device pci 18.0 on end # 0x141A HT Configuration device pci 18.1 on end # 0x141B Address Maps device pci 18.2 on end # 0x141C DRAM Configuration @@ -108,7 +108,7 @@ { { {0xA0, 0xA4}, {0xA2, 0xA6}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses }" + end
- end #chip northbridge/amd/pi/00630F01 # CPU side of HT root complex end #domain end #northbridge/amd/pi/00630F01/root_complex diff --git a/src/mainboard/amd/olivehillplus/devicetree.cb b/src/mainboard/amd/olivehillplus/devicetree.cb index ee0cd98..430b17b 100644 --- a/src/mainboard/amd/olivehillplus/devicetree.cb +++ b/src/mainboard/amd/olivehillplus/devicetree.cb @@ -21,52 +21,53 @@
device domain 0 on subsystemid 0x1022 0x1410 inherit - chip northbridge/amd/pi/00730F01 # CPU side of HT root complex
- chip northbridge/amd/pi/00730F01 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 0.2 off end # IOMMU - device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 - device pci 1.1 on end # Internal Multimedia - device pci 2.0 on end # PCIe Host Bridge - device pci 2.1 on end # x4 PCIe slot - device pci 2.2 on end # mPCIe slot - device pci 2.3 on end # Realtek NIC - device pci 2.4 on end # Edge Connector - device pci 2.5 on end # Edge Connector - device pci 8.0 on end # Platform Security Processor - end #chip northbridge/amd/pi/00730F01 + chip northbridge/amd/pi/00730F01 + device pci 0.0 on end # Root Complex + device pci 0.2 off end # IOMMU + device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 + device pci 1.1 on end # Internal Multimedia + device pci 2.0 on end # PCIe Host Bridge + device pci 2.1 on end # x4 PCIe slot + device pci 2.2 on end # mPCIe slot + device pci 2.3 on end # Realtek NIC + device pci 2.4 on end # Edge Connector + device pci 2.5 on end # Edge Connector + device pci 8.0 on end # Platform Security Processor + end #chip northbridge/amd/pi/00730F01
- chip southbridge/amd/pi/hudson # it is under NB/SB Link, but on the same pci bus - device pci 10.0 on end # XHCI HC0 - device pci 11.0 on end # SATA - device pci 12.0 on end # EHCI #0 - device pci 13.0 on end # EHCI #1 - device pci 14.0 on # SMBus - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - end # SMbus - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on end # LPC 0x439d - device pci 14.7 on end # SD - device pci 16.0 on end # EHCI #2 - end #chip southbridge/amd/pi/hudson + chip southbridge/amd/pi/hudson + device pci 10.0 on end # XHCI HC0 + device pci 11.0 on end # SATA + device pci 12.0 on end # EHCI #0 + device pci 13.0 on end # EHCI #1 + device pci 14.0 on # SMBus + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + end # SMbus + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on end # LPC 0x439d + device pci 14.7 on end # SD + device pci 16.0 on end # EHCI #2 + end #chip southbridge/amd/pi/hudson
+ chip northbridge/amd/pi/00730F01 device pci 18.0 on end device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end device pci 18.4 on end device pci 18.5 on end + register "spdAddrLookup" = " { { {0xA0, 0xA2} }, // socket 0, channel 0, slots 0 & 1 - 8-bit SPD addresses }" + end
- end #chip northbridge/amd/pi/00730F01 # CPU side of HT root complex end #domain end #northbridge/amd/pi/00730F01/root_complex diff --git a/src/mainboard/bap/ode_e21XX/devicetree.cb b/src/mainboard/bap/ode_e21XX/devicetree.cb index 04b0932..021ee90 100644 --- a/src/mainboard/bap/ode_e21XX/devicetree.cb +++ b/src/mainboard/bap/ode_e21XX/devicetree.cb @@ -21,96 +21,94 @@
device domain 0 on subsystemid 0x1022 0x1410 inherit - chip northbridge/amd/pi/00730F01 # CPU side of HT root complex
- chip northbridge/amd/pi/00730F01 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 0.2 off end # IOMMU - device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 - device pci 1.1 on end # Internal Multimedia - device pci 2.0 on end # PCIe Host Bridge - device pci 2.1 on end # x4 PCIe slot - device pci 2.2 on end # PCIe Q7 Realtek GBit LAN - device pci 2.3 on end # PCIe CB Realtek GBit LAN - device pci 2.4 on end # PCIe x2 BAP FPGA - device pci 8.0 on end # Platform Security Processor - end #chip northbridge/amd/pi/00730F01 + chip northbridge/amd/pi/00730F01 + device pci 0.0 on end # Root Complex + device pci 0.2 off end # IOMMU + device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 + device pci 1.1 on end # Internal Multimedia + device pci 2.0 on end # PCIe Host Bridge + device pci 2.1 on end # x4 PCIe slot + device pci 2.2 on end # PCIe Q7 Realtek GBit LAN + device pci 2.3 on end # PCIe CB Realtek GBit LAN + device pci 2.4 on end # PCIe x2 BAP FPGA + device pci 8.0 on end # Platform Security Processor + end #chip northbridge/amd/pi/00730F01
- chip southbridge/amd/pi/hudson # it is under NB/SB Link, but on the same pci bus - device pci 10.0 on end # XHCI HC0 - device pci 11.0 on end # SATA - device pci 12.0 on end # EHCI #0 - device pci 13.0 on end # EHCI #1 - device pci 14.0 on end # SMBus - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - chip superio/fintek/f81866d - register "hwm_amd_tsi_addr" = "0x98" # Set to AMD - register "hwm_amd_tsi_control" = "0x02" # Set to AMD - register "hwm_fan_select" = "0xC0" # Sets Fan2 to PWM - register "hwm_fan_mode" = "0xD5" # Sets FAN1-3 to Auto RPM mode - register "hwm_fan3_control" = "0x00" # Fan control 23kHz - register "hwm_fan2_temp_map_select" = "0x1E" # Fan control 23kHz - register "hwm_fan2_bound1" = "0x3C" # 60°C - register "hwm_fan2_bound2" = "0x32" # 50°C - register "hwm_fan2_bound3" = "0x28" # 40°C - register "hwm_fan2_bound4" = "0x1E" # 30°C - register "hwm_fan2_seg1_speed" = "0xFF" # 100% - register "hwm_fan2_seg2_speed" = "0xD9" # 85% - register "hwm_fan2_seg3_speed" = "0xB2" # 70% - register "hwm_fan2_seg4_speed" = "0x99" # 60% - register "hwm_fan2_seg5_speed" = "0x80" # 50% - register "hwm_temp_sens_type" = "0x04" # Sets temp sensor 1 type to to thermistor - device pnp 4e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 4e.3 off end # Parallel Port - device pnp 4e.4 on # Hardware Monitor - io 0x60 = 0x295 - irq 0x70 = 0 - end - device pnp 4e.5 off # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 4e.6 off end # GPIO - device pnp 4e.7 on end # WDT - device pnp 4e.a off end # PME - device pnp 4e.10 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.11 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 4e.12 off # COM3 - io 0x60 = 0x3e8 - irq 0x70 = 4 - end - device pnp 4e.13 off # COM4 - io 0x60 = 0x2e8 - irq 0x70 = 3 - end - device pnp 4e.14 off # COM5 - end - device pnp 4e.15 off # COM6 - end - end # f81866d - end #LPC - device pci 14.7 on end # SD - end #chip southbridge/amd/pi/hudson + chip southbridge/amd/pi/hudson + device pci 10.0 on end # XHCI HC0 + device pci 11.0 on end # SATA + device pci 12.0 on end # EHCI #0 + device pci 13.0 on end # EHCI #1 + device pci 14.0 on end # SMBus + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/fintek/f81866d + register "hwm_amd_tsi_addr" = "0x98" # Set to AMD + register "hwm_amd_tsi_control" = "0x02" # Set to AMD + register "hwm_fan_select" = "0xC0" # Sets Fan2 to PWM + register "hwm_fan_mode" = "0xD5" # Sets FAN1-3 to Auto RPM mode + register "hwm_fan3_control" = "0x00" # Fan control 23kHz + register "hwm_fan2_temp_map_select" = "0x1E" # Fan control 23kHz + register "hwm_fan2_bound1" = "0x3C" # 60°C + register "hwm_fan2_bound2" = "0x32" # 50°C + register "hwm_fan2_bound3" = "0x28" # 40°C + register "hwm_fan2_bound4" = "0x1E" # 30°C + register "hwm_fan2_seg1_speed" = "0xFF" # 100% + register "hwm_fan2_seg2_speed" = "0xD9" # 85% + register "hwm_fan2_seg3_speed" = "0xB2" # 70% + register "hwm_fan2_seg4_speed" = "0x99" # 60% + register "hwm_fan2_seg5_speed" = "0x80" # 50% + register "hwm_temp_sens_type" = "0x04" # Sets temp sensor 1 type to to thermistor + device pnp 4e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 4e.3 off end # Parallel Port + device pnp 4e.4 on # Hardware Monitor + io 0x60 = 0x295 + irq 0x70 = 0 + end + device pnp 4e.5 off # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 4e.6 off end # GPIO + device pnp 4e.7 on end # WDT + device pnp 4e.a off end # PME + device pnp 4e.10 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.11 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 4e.12 off # COM3 + io 0x60 = 0x3e8 + irq 0x70 = 4 + end + device pnp 4e.13 off # COM4 + io 0x60 = 0x2e8 + irq 0x70 = 3 + end + device pnp 4e.14 off # COM5 + end + device pnp 4e.15 off # COM6 + end + end # f81866d + end #LPC + device pci 14.7 on end # SD + end #chip southbridge/amd/pi/hudson
- device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end
- end #chip northbridge/amd/pi/00730F01 # CPU side of HT root complex end #domain end #northbridge/amd/pi/00730F01/root_complex diff --git a/src/mainboard/pcengines/apu2/variants/apu2/devicetree.cb b/src/mainboard/pcengines/apu2/variants/apu2/devicetree.cb index 2905e2c..6728228 100644 --- a/src/mainboard/pcengines/apu2/variants/apu2/devicetree.cb +++ b/src/mainboard/pcengines/apu2/variants/apu2/devicetree.cb @@ -21,74 +21,72 @@
device domain 0 on subsystemid 0x1022 0x1410 inherit - chip northbridge/amd/pi/00730F01 # CPU side of HT root complex
- chip northbridge/amd/pi/00730F01 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 0.2 on end # IOMMU - device pci 1.0 off end # Internal Graphics P2P bridge 0x9804 - device pci 1.1 off end # Internal Multimedia - device pci 2.0 on end # PCIe Host Bridge - device pci 2.1 on end # mPCIe slot 2 (on GFX lane) - device pci 2.2 on end # LAN3 - device pci 2.3 on end # LAN2 - device pci 2.4 on end # LAN1 - device pci 2.5 on end # mPCIe slot 1 - device pci 8.0 on end # Platform Security Processor - end #chip northbridge/amd/pi/00730F01 + chip northbridge/amd/pi/00730F01 + device pci 0.0 on end # Root Complex + device pci 0.2 on end # IOMMU + device pci 1.0 off end # Internal Graphics P2P bridge 0x9804 + device pci 1.1 off end # Internal Multimedia + device pci 2.0 on end # PCIe Host Bridge + device pci 2.1 on end # mPCIe slot 2 (on GFX lane) + device pci 2.2 on end # LAN3 + device pci 2.3 on end # LAN2 + device pci 2.4 on end # LAN1 + device pci 2.5 on end # mPCIe slot 1 + device pci 8.0 on end # Platform Security Processor + end #chip northbridge/amd/pi/00730F01
- chip southbridge/amd/pi/hudson # it is under NB/SB Link, but on the same pci bus - device pci 10.0 on end # XHCI HC0 muxed with EHCI 2 - device pci 11.0 on end # SATA - device pci 12.0 off end # USB EHCI0 usb[0:3] not connected - device pci 13.0 on end # USB EHCI1 usb[4:7] - device pci 14.0 on end # SM - device pci 14.3 on # LPC 0x439d - chip superio/nuvoton/nct5104d # SIO NCT5104D - register "irq_trigger_type" = "0" - device pnp 2e.0 off end - device pnp 2e.2 on - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.10 on - # UART C is conditionally turned on - io 0x60 = 0x3e8 - irq 0x70 = 4 - end - device pnp 2e.11 on - # UART D is conditionally turned on - io 0x60 = 0x2e8 - irq 0x70 = 3 - end - device pnp 2e.8 off end - device pnp 2e.f off end - # GPIO0 and GPIO1 are conditionally turned on - device pnp 2e.007 on end - device pnp 2e.107 on end - device pnp 2e.607 off end - device pnp 2e.e off end - end # SIO NCT5104D - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end # LPC TPM - end # LPC 0x439d + chip southbridge/amd/pi/hudson + device pci 10.0 on end # XHCI HC0 muxed with EHCI 2 + device pci 11.0 on end # SATA + device pci 12.0 off end # USB EHCI0 usb[0:3] not connected + device pci 13.0 on end # USB EHCI1 usb[4:7] + device pci 14.0 on end # SM + device pci 14.3 on # LPC 0x439d + chip superio/nuvoton/nct5104d # SIO NCT5104D + register "irq_trigger_type" = "0" + device pnp 2e.0 off end + device pnp 2e.2 on + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.10 on + # UART C is conditionally turned on + io 0x60 = 0x3e8 + irq 0x70 = 4 + end + device pnp 2e.11 on + # UART D is conditionally turned on + io 0x60 = 0x2e8 + irq 0x70 = 3 + end + device pnp 2e.8 off end + device pnp 2e.f off end + # GPIO0 and GPIO1 are conditionally turned on + device pnp 2e.007 on end + device pnp 2e.107 on end + device pnp 2e.607 off end + device pnp 2e.e off end + end # SIO NCT5104D + chip drivers/pc80/tpm + device pnp 0c31.0 on end + end # LPC TPM + end # LPC 0x439d
- device pci 14.7 on end # SD - device pci 16.0 on end # USB EHCI2 usb[8:7] - muxed with XHCI - end #chip southbridge/amd/pi/hudson + device pci 14.7 on end # SD + device pci 16.0 on end # USB EHCI2 usb[8:7] - muxed with XHCI + end #chip southbridge/amd/pi/hudson
- device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end
- end #chip northbridge/amd/pi/00730F01 # CPU side of HT root complex end #domain end #northbridge/amd/pi/00730F01/root_complex diff --git a/src/mainboard/pcengines/apu2/variants/apu3/devicetree.cb b/src/mainboard/pcengines/apu2/variants/apu3/devicetree.cb index 4da123e..0c0c21e 100644 --- a/src/mainboard/pcengines/apu2/variants/apu3/devicetree.cb +++ b/src/mainboard/pcengines/apu2/variants/apu3/devicetree.cb @@ -21,71 +21,69 @@
device domain 0 on subsystemid 0x1022 0x1410 inherit - chip northbridge/amd/pi/00730F01 # CPU side of HT root complex
- chip northbridge/amd/pi/00730F01 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 0.2 on end # IOMMU - device pci 1.0 off end # Internal Graphics P2P bridge 0x9804 - device pci 1.1 off end # Internal Multimedia - device pci 2.0 on end # PCIe Host Bridge - device pci 2.1 on end # mPCIe slot 2 (on GFX lane) - device pci 2.2 on end # LAN3 - device pci 2.3 on end # LAN2 - device pci 2.4 on end # LAN1 - device pci 2.5 on end # mPCIe slot 1 - device pci 8.0 on end # Platform Security Processor - end #chip northbridge/amd/pi/00730F01 + chip northbridge/amd/pi/00730F01 + device pci 0.0 on end # Root Complex + device pci 0.2 on end # IOMMU + device pci 1.0 off end # Internal Graphics P2P bridge 0x9804 + device pci 1.1 off end # Internal Multimedia + device pci 2.0 on end # PCIe Host Bridge + device pci 2.1 on end # mPCIe slot 2 (on GFX lane) + device pci 2.2 on end # LAN3 + device pci 2.3 on end # LAN2 + device pci 2.4 on end # LAN1 + device pci 2.5 on end # mPCIe slot 1 + device pci 8.0 on end # Platform Security Processor + end #chip northbridge/amd/pi/00730F01
- chip southbridge/amd/pi/hudson # it is under NB/SB Link, but on the same pci bus - device pci 10.0 on end # XHCI HC0 muxed with EHCI 2 - device pci 11.0 on end # SATA - device pci 12.0 on end # USB EHCI0 usb[0:3] is connected - device pci 13.0 on end # USB EHCI1 usb[4:7] - device pci 14.0 on end # SM - device pci 14.3 on # LPC 0x439d - chip superio/nuvoton/nct5104d # SIO NCT5104D - register "irq_trigger_type" = "0" - device pnp 2e.0 off end - device pnp 2e.2 on - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.10 on - # UART C is conditionally turned on - io 0x60 = 0x3e8 - irq 0x70 = 4 - end - device pnp 2e.11 on - # UART D is conditionally turned on - io 0x60 = 0x2e8 - irq 0x70 = 3 - end - device pnp 2e.8 off end - device pnp 2e.f off end - # GPIO0 and GPIO1 are conditionally turned on - device pnp 2e.007 on end - device pnp 2e.107 on end - device pnp 2e.607 off end - device pnp 2e.e off end - end # SIO NCT5104D - end # LPC 0x439d + chip southbridge/amd/pi/hudson # it is under NB/SB Link, but on the same pci bus + device pci 10.0 on end # XHCI HC0 muxed with EHCI 2 + device pci 11.0 on end # SATA + device pci 12.0 on end # USB EHCI0 usb[0:3] is connected + device pci 13.0 on end # USB EHCI1 usb[4:7] + device pci 14.0 on end # SM + device pci 14.3 on # LPC 0x439d + chip superio/nuvoton/nct5104d # SIO NCT5104D + register "irq_trigger_type" = "0" + device pnp 2e.0 off end + device pnp 2e.2 on + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.10 on + # UART C is conditionally turned on + io 0x60 = 0x3e8 + irq 0x70 = 4 + end + device pnp 2e.11 on + # UART D is conditionally turned on + io 0x60 = 0x2e8 + irq 0x70 = 3 + end + device pnp 2e.8 off end + device pnp 2e.f off end + # GPIO0 and GPIO1 are conditionally turned on + device pnp 2e.007 on end + device pnp 2e.107 on end + device pnp 2e.607 off end + device pnp 2e.e off end + end # SIO NCT5104D + end # LPC 0x439d
- device pci 14.7 on end # SD - device pci 16.0 on end # USB EHCI2 usb[8:7] - muxed with XHCI - end #chip southbridge/amd/pi/hudson + device pci 14.7 on end # SD + device pci 16.0 on end # USB EHCI2 usb[8:7] - muxed with XHCI + end #chip southbridge/amd/pi/hudson
- device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end
- end #chip northbridge/amd/pi/00730F01 # CPU side of HT root complex end #domain end #northbridge/amd/pi/00730F01/root_complex diff --git a/src/mainboard/pcengines/apu2/variants/apu4/devicetree.cb b/src/mainboard/pcengines/apu2/variants/apu4/devicetree.cb index b95afab..c93c04f 100644 --- a/src/mainboard/pcengines/apu2/variants/apu4/devicetree.cb +++ b/src/mainboard/pcengines/apu2/variants/apu4/devicetree.cb @@ -21,71 +21,69 @@
device domain 0 on subsystemid 0x1022 0x1410 inherit - chip northbridge/amd/pi/00730F01 # CPU side of HT root complex
- chip northbridge/amd/pi/00730F01 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 0.2 on end # IOMMU - device pci 1.0 off end # Internal Graphics P2P bridge 0x9804 - device pci 1.1 off end # Internal Multimedia - device pci 2.0 on end # PCIe Host Bridge - device pci 2.1 on end # LAN1 - device pci 2.2 on end # LAN2 - device pci 2.3 on end # LAN3 - device pci 2.4 on end # LAN4 - device pci 2.5 on end # mPCIe slot 1 - device pci 8.0 on end # Platform Security Processor - end #chip northbridge/amd/pi/00730F01 + chip northbridge/amd/pi/00730F01 + device pci 0.0 on end # Root Complex + device pci 0.2 on end # IOMMU + device pci 1.0 off end # Internal Graphics P2P bridge 0x9804 + device pci 1.1 off end # Internal Multimedia + device pci 2.0 on end # PCIe Host Bridge + device pci 2.1 on end # LAN1 + device pci 2.2 on end # LAN2 + device pci 2.3 on end # LAN3 + device pci 2.4 on end # LAN4 + device pci 2.5 on end # mPCIe slot 1 + device pci 8.0 on end # Platform Security Processor + end #chip northbridge/amd/pi/00730F01
- chip southbridge/amd/pi/hudson # it is under NB/SB Link, but on the same pci bus - device pci 10.0 on end # XHCI HC0 muxed with EHCI 2 - device pci 11.0 on end # SATA - device pci 12.0 on end # USB EHCI0 usb[0:3] is connected - device pci 13.0 on end # USB EHCI1 usb[4:7] - device pci 14.0 on end # SM - device pci 14.3 on # LPC 0x439d - chip superio/nuvoton/nct5104d # SIO NCT5104D - register "irq_trigger_type" = "0" - device pnp 2e.0 off end - device pnp 2e.2 on - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.10 on - # UART C is conditionally turned on - io 0x60 = 0x3e8 - irq 0x70 = 4 - end - device pnp 2e.11 on - # UART D is conditionally turned on - io 0x60 = 0x2e8 - irq 0x70 = 3 - end - device pnp 2e.8 off end - device pnp 2e.f off end - # GPIO0 and GPIO1 are conditionally turned on - device pnp 2e.007 on end - device pnp 2e.107 on end - device pnp 2e.607 off end - device pnp 2e.e off end - end # SIO NCT5104D - end # LPC 0x439d + chip southbridge/amd/pi/hudson + device pci 10.0 on end # XHCI HC0 muxed with EHCI 2 + device pci 11.0 on end # SATA + device pci 12.0 on end # USB EHCI0 usb[0:3] is connected + device pci 13.0 on end # USB EHCI1 usb[4:7] + device pci 14.0 on end # SM + device pci 14.3 on # LPC 0x439d + chip superio/nuvoton/nct5104d # SIO NCT5104D + register "irq_trigger_type" = "0" + device pnp 2e.0 off end + device pnp 2e.2 on + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.10 on + # UART C is conditionally turned on + io 0x60 = 0x3e8 + irq 0x70 = 4 + end + device pnp 2e.11 on + # UART D is conditionally turned on + io 0x60 = 0x2e8 + irq 0x70 = 3 + end + device pnp 2e.8 off end + device pnp 2e.f off end + # GPIO0 and GPIO1 are conditionally turned on + device pnp 2e.007 on end + device pnp 2e.107 on end + device pnp 2e.607 off end + device pnp 2e.e off end + end # SIO NCT5104D + end # LPC 0x439d
- device pci 14.7 on end # SD - device pci 16.0 on end # USB EHCI2 usb[8:7] - muxed with XHCI - end #chip southbridge/amd/pi/hudson + device pci 14.7 on end # SD + device pci 16.0 on end # USB EHCI2 usb[8:7] - muxed with XHCI + end #chip southbridge/amd/pi/hudson
- device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end
- end #chip northbridge/amd/pi/00730F01 # CPU side of HT root complex end #domain end #northbridge/amd/pi/00730F01/root_complex diff --git a/src/mainboard/pcengines/apu2/variants/apu5/devicetree.cb b/src/mainboard/pcengines/apu2/variants/apu5/devicetree.cb index b5700f8..b6b22cf 100644 --- a/src/mainboard/pcengines/apu2/variants/apu5/devicetree.cb +++ b/src/mainboard/pcengines/apu2/variants/apu5/devicetree.cb @@ -21,73 +21,71 @@
device domain 0 on subsystemid 0x1022 0x1410 inherit - chip northbridge/amd/pi/00730F01 # CPU side of HT root complex
- chip northbridge/amd/pi/00730F01 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 0.2 on end # IOMMU - device pci 1.0 off end # Internal Graphics P2P bridge 0x9804 - device pci 1.1 off end # Internal Multimedia - device pci 2.0 on end # PCIe Host Bridge - device pci 2.1 on end # mPCIe slot 2 (on GFX lane) - device pci 2.2 on end # LAN3 - device pci 2.3 on end # LAN2 - device pci 2.4 on end # LAN1 - device pci 2.5 on end # mPCIe slot 1 - device pci 8.0 on end # Platform Security Processor - end #chip northbridge/amd/pi/00730F01 + chip northbridge/amd/pi/00730F01 # PCI side of HT root complex + device pci 0.0 on end # Root Complex + device pci 0.2 on end # IOMMU + device pci 1.0 off end # Internal Graphics P2P bridge 0x9804 + device pci 1.1 off end # Internal Multimedia + device pci 2.0 on end # PCIe Host Bridge + device pci 2.1 on end # mPCIe slot 2 (on GFX lane) + device pci 2.2 on end # LAN3 + device pci 2.3 on end # LAN2 + device pci 2.4 on end # LAN1 + device pci 2.5 on end # mPCIe slot 1 + device pci 8.0 on end # Platform Security Processor + end #chip northbridge/amd/pi/00730F01
- chip southbridge/amd/pi/hudson # it is under NB/SB Link, but on the same pci bus - device pci 10.0 on end # XHCI HC0 muxed with EHCI 2 - device pci 11.0 on end # SATA - device pci 12.0 on end # USB EHCI0 usb[0:3] is connected - device pci 13.0 on end # USB EHCI1 usb[4:7] - device pci 14.0 on end # SM - device pci 14.3 on # LPC 0x439d - chip superio/nuvoton/nct5104d # SIO NCT5104D - register "irq_trigger_type" = "0" - device pnp 2e.0 off end - device pnp 2e.2 on - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.10 on - # UART C is conditionally turned on - io 0x60 = 0x3e8 - irq 0x70 = 4 - end - device pnp 2e.11 on - # UART D is conditionally turned on - io 0x60 = 0x2e8 - irq 0x70 = 3 - end - device pnp 2e.8 off end - device pnp 2e.f off end - device pnp 2e.007 off end - device pnp 2e.107 off end - device pnp 2e.607 off end - device pnp 2e.e off end - end # SIO NCT5104D - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end # LPC TPM - end # LPC 0x439d + chip southbridge/amd/pi/hudson # it is under NB/SB Link, but on the same pci bus + device pci 10.0 on end # XHCI HC0 muxed with EHCI 2 + device pci 11.0 on end # SATA + device pci 12.0 on end # USB EHCI0 usb[0:3] is connected + device pci 13.0 on end # USB EHCI1 usb[4:7] + device pci 14.0 on end # SM + device pci 14.3 on # LPC 0x439d + chip superio/nuvoton/nct5104d # SIO NCT5104D + register "irq_trigger_type" = "0" + device pnp 2e.0 off end + device pnp 2e.2 on + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.10 on + # UART C is conditionally turned on + io 0x60 = 0x3e8 + irq 0x70 = 4 + end + device pnp 2e.11 on + # UART D is conditionally turned on + io 0x60 = 0x2e8 + irq 0x70 = 3 + end + device pnp 2e.8 off end + device pnp 2e.f off end + device pnp 2e.007 off end + device pnp 2e.107 off end + device pnp 2e.607 off end + device pnp 2e.e off end + end # SIO NCT5104D + chip drivers/pc80/tpm + device pnp 0c31.0 on end + end # LPC TPM + end # LPC 0x439d
- device pci 14.7 off end # SD - device pci 16.0 on end # USB EHCI2 usb[8:7] - muxed with XHCI - end #chip southbridge/amd/pi/hudson + device pci 14.7 off end # SD + device pci 16.0 on end # USB EHCI2 usb[8:7] - muxed with XHCI + end #chip southbridge/amd/pi/hudson
- device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end
- end #chip northbridge/amd/pi/00730F01 # CPU side of HT root complex end #domain end #northbridge/amd/pi/00730F01/root_complex
-
Kyösti Mälkki (Code Review) -
Marshall Dawson (Code Review)
-
Michał Żygowski (Code Review)
-
Paul Menzel (Code Review)