Change in coreboot[master]: mb/google/nissa/var/nivviks: Enable pen garage

[Eric Lai (Code Review)]

Eric Lai has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/62675 )

Change subject: mb/google/nissa/var/nivviks: Enable pen garage
......................................................................

mb/google/nissa/var/nivviks: Enable pen garage

Enable pen garage. Pen detect is active low. And wake system when
eject.

BUG=b:223476974
TEST=evtest work as expected.
Input driver version is 1.0.1
Input device ID: bus 0x19 vendor 0x1 product 0x1 version 0x100
Input device name: "PRP0001:00"
Supported events:
  Event type 0 (EV_SYN)
  Event type 5 (EV_SW)
    Event code 15 (SW_PEN_INSERTED) state 0
Properties:
Testing ... (interrupt to exit)
Event: type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 1
Event: -------------- SYN_REPORT ------------
Event: type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 0

Signed-off-by: Eric Lai 
Change-Id: I2f676301c3372a4760853ce9c10b75f94e22bbcd
---
M src/mainboard/google/brya/Kconfig.name
M src/mainboard/google/brya/variants/baseboard/nissa/gpio.c
M src/mainboard/google/brya/variants/nivviks/overridetree.cb
3 files changed, 14 insertions(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/75/62675/1

diff --git a/src/mainboard/google/brya/Kconfig.name b/src/mainboard/google/brya/Kconfig.name
index 3895aab..186ca6f 100644
--- a/src/mainboard/google/brya/Kconfig.name
+++ b/src/mainboard/google/brya/Kconfig.name
@@ -83,6 +83,7 @@
 config BOARD_GOOGLE_NIVVIKS
    bool "->  Nivviks"
    select BOARD_GOOGLE_BASEBOARD_NISSA
+	select DRIVERS_GENERIC_GPIO_KEYS
    select DRIVERS_INTEL_MIPI_CAMERA
    select HAVE_WWAN_POWER_SEQUENCE

diff --git a/src/mainboard/google/brya/variants/baseboard/nissa/gpio.c b/src/mainboard/google/brya/variants/baseboard/nissa/gpio.c
index 8a3ea0e..60b0018 100644
--- a/src/mainboard/google/brya/variants/baseboard/nissa/gpio.c
+++ b/src/mainboard/google/brya/variants/baseboard/nissa/gpio.c
@@ -238,7 +238,7 @@
    /* F14 : GSXDIN ==> TCHPAD_INT_ODL */
    PAD_CFG_GPI_IRQ_WAKE(GPP_F14, NONE, PLTRST, LEVEL, INVERT),
    /* F15 : GSXSRESET# ==> SOC_PEN_DETECT_ODL */
-	PAD_CFG_GPI_SCI(GPP_F15, NONE, DEEP, EDGE_SINGLE, NONE),
+	PAD_CFG_GPI_SCI_HIGH(GPP_F15, NONE, DEEP, EDGE_SINGLE),
    /* F16 : NC */
    PAD_NC(GPP_F16, NONE),
    /* F17 : THC1_SPI2_RST# ==> EC_SOC_WAKE_ODL */
diff --git a/src/mainboard/google/brya/variants/nivviks/overridetree.cb b/src/mainboard/google/brya/variants/nivviks/overridetree.cb
index 8ccbac7..d5d0621 100644
--- a/src/mainboard/google/brya/variants/nivviks/overridetree.cb
+++ b/src/mainboard/google/brya/variants/nivviks/overridetree.cb
@@ -47,6 +47,18 @@
    			register "hid_desc_reg_offset" = "0x01"
    			device i2c 15 on end
    		end
+			chip drivers/generic/gpio_keys
+				register "name" = ""PENH""
+				register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_F13)"
+				register "key.wake_gpe" = "GPE0_DW2_15"
+				register "key.wakeup_route" = "WAKEUP_ROUTE_SCI"
+				register "key.wakeup_event_action" = "EV_ACT_DEASSERTED"
+				register "key.dev_name" = ""EJCT""
+				register "key.linux_code" = "SW_PEN_INSERTED"
+				register "key.linux_input_type" = "EV_SW"
+				register "key.label" = ""pen_eject""
+				device generic 0 on end
+			end
    	end
    	device ref i2c2 on
    		chip drivers/i2c/sx9324