Mario Scheithauer has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/58295 )
Change subject: mb/siemens/mc_ehl2: Adjust USB settings ......................................................................
mb/siemens/mc_ehl2: Adjust USB settings
Correct the USB settings, suitable for this mainboard.
Change-Id: I691d91d2a76e27b8efdc18eeae737a78e9ae38fa Signed-off-by: Mario Scheithauer mario.scheithauer@siemens.com --- M src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb 1 file changed, 12 insertions(+), 12 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/95/58295/1
diff --git a/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb b/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb index 06fdf0a..9d037ca 100644 --- a/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb +++ b/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb @@ -27,21 +27,21 @@ }"
# USB related UPDs - register "usb2_ports[0]" = "USB2_PORT_SHORT(OC_SKIP)" # USB3/2 Type A port 1 - register "usb2_ports[1]" = "USB2_PORT_SHORT(OC_SKIP)" # USB3/2 Type A Port 2 - register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Onboard USB - register "usb2_ports[3]" = "USB2_PORT_EMPTY" # Port is unused - register "usb2_ports[4]" = "USB2_PORT_EMPTY" # Port is unused - register "usb2_ports[5]" = "USB2_PORT_EMPTY" # Port is unused - register "usb2_ports[6]" = "USB2_PORT_EMPTY" # Port is unused - register "usb2_ports[7]" = "USB2_PORT_EMPTY" # Port is unused - register "usb2_ports[8]" = "USB2_PORT_EMPTY" # Port is unused - register "usb2_ports[9]" = "USB2_PORT_EMPTY" # Port is unused + register "usb2_ports[0]" = "USB2_PORT_MID(OC2)" # X125/X135 + register "usb2_ports[1]" = "USB2_PORT_MID(OC2)" # X125/X135 + register "usb2_ports[2]" = "USB2_PORT_MID(OC0)" # X145/X155 + register "usb2_ports[3]" = "USB2_PORT_MID(OC0)" # X145/X155 + register "usb2_ports[4]" = "USB2_PORT_MID(OC3)" # USB Panel + register "usb2_ports[5]" = "USB2_PORT_MID(OC3)" # USB Panel + register "usb2_ports[6]" = "USB2_PORT_EMPTY" + register "usb2_ports[7]" = "USB2_PORT_EMPTY" + register "usb2_ports[8]" = "USB2_PORT_EMPTY" + register "usb2_ports[9]" = "USB2_PORT_EMPTY"
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3/2 Type A port1 register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3/2 Type A port2 - register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Port is not used - register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Port is not used + register "usb3_ports[2]" = "USB3_PORT_EMPTY" # UNUSED + register "usb3_ports[3]" = "USB3_PORT_EMPTY" # UNUSED
# Skip the CPU repalcement check register "SkipCpuReplacementCheck" = "1"