[XS] Change in coreboot[main]: soc/mediatek/mt8196: Set SPMI-P SCL/SDA pins to pull-down

[Jarried Lin (Code Review)]

Attention is currently required from: Hope Wang, Hung-Te Lin, Jarried Lin, Yu-Ping Wu.

Hello Hope Wang, Hung-Te Lin, Yidi Lin, Yu-Ping Wu, build bot (Jenkins),

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/85751?usp=email

to look at the new patch set (#9).

The following approvals got outdated and were removed:
Code-Review+1 by Yu-Ping Wu, Verified+1 by build bot (Jenkins)

Change subject: soc/mediatek/mt8196: Set SPMI-P SCL/SDA pins to pull-down
......................................................................

soc/mediatek/mt8196: Set SPMI-P SCL/SDA pins to pull-down

The current Pull-Down capabilities of the SPMI are insufficient and
require optimization. Configure the SCL and SDA of the SPMI-P to
Pull-Down mode on MT8196 SoC side. It is done only once during the SPMI
read check to fix SPMI clock calibration failure.

TEST=Build pass
BUG=b:361174333

Change-Id: Idbf8ed8e31850ca81c823db1b25bde4a83a48c4f
Signed-off-by: Hope Wang 
---
M src/soc/mediatek/mt8196/pmif_spmi.c
1 file changed, 3 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/51/85751/9