Patch set updated for coreboot: arch/x86/assembly_entry: allow early post CAR stages to use common code

[Aaron Durbin]

Aaron Durbin ([e-mail]) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/14548

-gerrit

commit 84901350e69434f24206fe2fc932837845539f32
Author: Aaron Durbin 
Date:   Fri Apr 29 12:34:01 2016 -0500

arch/x86/assembly_entry: allow early post CAR stages to use common code

The skylake-based Chromebooks use a separate verstage which runs
    just after bootblock and prior to romstage. The normal path for
    romstage would be to reload the gdt, however in the previously
    described scenario has verstage performing that work. Therefore,
    provide that path under those conditions. The only difference
    from the C_ENVIRONMENT_BOOTBLOCK scenario is that the stack
    should not be reloaded since there's no way to know the top
    of the stack.

Change-Id: Ic39ab52a856233d3042ac02a15ae4816ddfe07c7
    Signed-off-by: Aaron Durbin 
---
 src/arch/x86/assembly_entry.S | 26 ++++++++++++++++++++------
 1 file changed, 20 insertions(+), 6 deletions(-)

diff --git a/src/arch/x86/assembly_entry.S b/src/arch/x86/assembly_entry.S
index ec3888f..86dbba4 100644
--- a/src/arch/x86/assembly_entry.S
+++ b/src/arch/x86/assembly_entry.S
@@ -14,21 +14,35 @@
  * GNU General Public License for more details.
  */

-#if IS_ENABLED(CONFIG_C_ENVIRONMENT_BOOTBLOCK)
+#include <rules.h>

/*
- * This path is for stages that post bootblock when employing
- * CONFIG_C_ENVIRONMENT_BOOTBLOCK. There's no need to re-load the gdt, etc
- * as all those settings are cached within the processor. In order to
- * continue with C code execution one needs to set stack pointer and clear
- * CAR_GLOBAL variables that are stage specific.
+ *Take the path where CAR_GLOBAL variables just need to be cleared when
+ * verstage runs directly after bootblock.
+ */
+#define ROMSTAGE_AFTER_VERSTAGE \
+	(IS_ENABLED(CONFIG_SEPARATE_VERSTAGE) && \
+		IS_ENABLED(CONFIG_VBOOT_STARTS_IN_BOOTBLOCK) && ENV_ROMSTAGE)
+
+#if IS_ENABLED(CONFIG_C_ENVIRONMENT_BOOTBLOCK) || ROMSTAGE_AFTER_VERSTAGE
+
+/*
+ * This path is for stages that are post bootblock when employing
+ * CONFIG_C_ENVIRONMENT_BOOTBLOCK or any intermediate stage succeeding
+ * the first stage to initialize protected mode. There's no need to re-load
+ * the gdt, etc as all those settings are cached within the processor. In
+ * order to continue with C code execution one needs to set stack pointer and
+ * clear CAR_GLOBAL variables that are stage specific.
  */
 .section ".text._start", "ax", @progbits
 .global _start
 _start:

+/* _car_stack_end symbol is only valid when bootblock does CAR setup. */
+#if IS_ENABLED(CONFIG_C_ENVIRONMENT_BOOTBLOCK)
    /* reset stack pointer to CAR stack */
    mov	$_car_stack_end, %esp
+#endif

/* clear CAR_GLOBAL area as it is not shared */
    cld