[M] Change in coreboot[master]: cpu/amd/pi/00730F01/fixme: use coreboot's PCI access functions

[Felix Held (Code Review)]

Felix Held has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/74616 )

Change subject: cpu/amd/pi/00730F01/fixme: use coreboot's PCI access functions
......................................................................

cpu/amd/pi/00730F01/fixme: use coreboot's PCI access functions

Use coreboot's native PCI access functions instead of using the
vendorcode's PCI access functions to set up the CPU IO routing in
function 1 of the HT PCI device. This file still has room for
improvement, but at least it's now using coreboot-native functionality.
Stoneyridge has a nicer implementation, but looking into possibly
unifying those is out of scope for this patch.

TEST=None

Signed-off-by: Felix Held 
Change-Id: Ieecc0e5f6576a838d79220b061de81e21b5d976c
---
M src/cpu/amd/pi/00730F01/fixme.c
1 file changed, 32 insertions(+), 36 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/16/74616/1

diff --git a/src/cpu/amd/pi/00730F01/fixme.c b/src/cpu/amd/pi/00730F01/fixme.c
index bc649b7..d36f507 100644
--- a/src/cpu/amd/pi/00730F01/fixme.c
+++ b/src/cpu/amd/pi/00730F01/fixme.c
@@ -1,54 +1,31 @@
 /* SPDX-License-Identifier: GPL-2.0-only */

+#include <amdblocks/pci_devs.h>
 #include <arch/hpet.h>
 #include <cpu/amd/mtrr.h>
+#include <device/pci.h>
 #include <northbridge/amd/agesa/agesa_helper.h>
-#include <Porting.h>
-#include <AGESA.h>
-#include <amdlib.h>

void amd_initcpuio(void)
 {
-	UINT64 MsrReg;
-	UINT32 PciData;
-	PCI_ADDR PciAddress;
-	AMD_CONFIG_PARAMS StdHeader;
-
    /* Enable legacy video routing: D18F1xF4 VGA Enable */
-	PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0xF4);
-	PciData = 1;
-	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+	pci_write_config32(_SOC_DEV(0x18, 1), 0xf4, 1);

/* The platform BIOS needs to ensure the memory ranges of SB800 legacy
     * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are
-	 * set to non-posted regions.
+	 * set to non-posted regions. Last address before processor local APIC
+	 * at FEE00000, set NP (non-posted) bit.
     */
-	PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x84);
-	/* last address before processor local APIC at FEE00000 */
-	PciData = 0x00FEDF00;
-	/* set NP (non-posted) bit */
-	PciData |= 1 << 7;
-	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
-	PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x80);
+	pci_write_config32(_SOC_DEV(0x18, 1), 0x84, 0x00fedf00 | (1 << 7));
    /* lowest NP address is HPET at FED00000 */
-	PciData = (HPET_BASE_ADDRESS >> 8) | 3;
-	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+	pci_write_config32(_SOC_DEV(0x18, 1), 0x80, (HPET_BASE_ADDRESS >> 8) | 3);

-	/* Map the remaining PCI hole as posted MMIO */
-	PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x8C);
-	PciData = 0x00FECF00; /* last address before non-posted range */
-	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
-	LibAmdMsrRead(TOP_MEM, &MsrReg, &StdHeader);
-	MsrReg = (MsrReg >> 8) | 3;
-	PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x88);
-	PciData = (UINT32)MsrReg;
-	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+	/* Map the remaining PCI hole as posted MMIO. 0xfecf0000 is the last
+	   address before non-posted range */
+	pci_write_config32(_SOC_DEV(0x18, 1), 0x8c, 0x00fecf00);
+	pci_write_config32(_SOC_DEV(0x18, 1), 0x88, (get_top_of_mem_below_4gb() >> 8) | 3);

/* Send all IO (0000-FFFF) to southbridge. */
-	PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0xC4);
-	PciData = 0x0000F000;
-	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
-	PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0xC0);
-	PciData = 0x00000003;
-	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+	pci_write_config32(_SOC_DEV(0x18, 1), 0xc4, 0x0000f000);
+	pci_write_config32(_SOC_DEV(0x18, 1), 0xc0, 0x00000003);
 }